| /* |
| * (C) Copyright 2010,2011 |
| * NVIDIA Corporation <www.nvidia.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <ns16550.h> |
| #include <linux/compiler.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/display.h> |
| #include <asm/arch/emc.h> |
| #include <asm/arch/funcmux.h> |
| #include <asm/arch/pinmux.h> |
| #include <asm/arch/pmu.h> |
| #include <asm/arch/pwm.h> |
| #include <asm/arch/tegra.h> |
| #include <asm/arch/usb.h> |
| #include <asm/arch-tegra/board.h> |
| #include <asm/arch-tegra/clk_rst.h> |
| #include <asm/arch-tegra/pmc.h> |
| #include <asm/arch-tegra/sys_proto.h> |
| #include <asm/arch-tegra/uart.h> |
| #include <asm/arch-tegra/warmboot.h> |
| #include <spi.h> |
| #include <i2c.h> |
| #include "emc.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| const struct tegra_sysinfo sysinfo = { |
| CONFIG_TEGRA_BOARD_STRING |
| }; |
| |
| #ifndef CONFIG_SPL_BUILD |
| /* |
| * Routine: timer_init |
| * Description: init the timestamp and lastinc value |
| */ |
| int timer_init(void) |
| { |
| return 0; |
| } |
| #endif |
| |
| void __pin_mux_usb(void) |
| { |
| } |
| |
| void pin_mux_usb(void) __attribute__((weak, alias("__pin_mux_usb"))); |
| |
| void __pin_mux_spi(void) |
| { |
| } |
| |
| void pin_mux_spi(void) __attribute__((weak, alias("__pin_mux_spi"))); |
| |
| void __gpio_early_init_uart(void) |
| { |
| } |
| |
| void gpio_early_init_uart(void) |
| __attribute__((weak, alias("__gpio_early_init_uart"))); |
| |
| void __pin_mux_nand(void) |
| { |
| funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_DEFAULT); |
| } |
| |
| void pin_mux_nand(void) __attribute__((weak, alias("__pin_mux_nand"))); |
| |
| /* |
| * Routine: power_det_init |
| * Description: turn off power detects |
| */ |
| static void power_det_init(void) |
| { |
| #if defined(CONFIG_TEGRA20) |
| struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; |
| |
| /* turn off power detects */ |
| writel(0, &pmc->pmc_pwr_det_latch); |
| writel(0, &pmc->pmc_pwr_det); |
| #endif |
| } |
| |
| /* |
| * Routine: board_init |
| * Description: Early hardware init. |
| */ |
| int board_init(void) |
| { |
| __maybe_unused int err; |
| |
| /* Do clocks and UART first so that printf() works */ |
| clock_init(); |
| clock_verify(); |
| |
| #ifdef CONFIG_SPI_UART_SWITCH |
| gpio_config_uart(); |
| #endif |
| #ifdef CONFIG_TEGRA_SPI |
| pin_mux_spi(); |
| spi_init(); |
| #endif |
| #ifdef CONFIG_PWM_TEGRA |
| if (pwm_init(gd->fdt_blob)) |
| debug("%s: Failed to init pwm\n", __func__); |
| #endif |
| #ifdef CONFIG_LCD |
| tegra_lcd_check_next_stage(gd->fdt_blob, 0); |
| #endif |
| /* boot param addr */ |
| gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100); |
| |
| power_det_init(); |
| |
| #ifdef CONFIG_TEGRA_I2C |
| #ifndef CONFIG_SYS_I2C_INIT_BOARD |
| #error "You must define CONFIG_SYS_I2C_INIT_BOARD to use i2c on Nvidia boards" |
| #endif |
| i2c_init_board(); |
| # ifdef CONFIG_TEGRA_PMU |
| if (pmu_set_nominal()) |
| debug("Failed to select nominal voltages\n"); |
| # ifdef CONFIG_TEGRA_CLOCK_SCALING |
| err = board_emc_init(); |
| if (err) |
| debug("Memory controller init failed: %d\n", err); |
| # endif |
| # endif /* CONFIG_TEGRA_PMU */ |
| #endif /* CONFIG_TEGRA_I2C */ |
| |
| #ifdef CONFIG_USB_EHCI_TEGRA |
| pin_mux_usb(); |
| board_usb_init(gd->fdt_blob); |
| #endif |
| #ifdef CONFIG_LCD |
| tegra_lcd_check_next_stage(gd->fdt_blob, 0); |
| #endif |
| |
| #ifdef CONFIG_TEGRA_NAND |
| pin_mux_nand(); |
| #endif |
| |
| #ifdef CONFIG_TEGRA_LP0 |
| /* save Sdram params to PMC 2, 4, and 24 for WB0 */ |
| warmboot_save_sdram_params(); |
| |
| /* prepare the WB code to LP0 location */ |
| warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE); |
| #endif |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_BOARD_EARLY_INIT_F |
| static void __gpio_early_init(void) |
| { |
| } |
| |
| void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init"))); |
| |
| int board_early_init_f(void) |
| { |
| board_init_uart_f(); |
| |
| /* Initialize periph GPIOs */ |
| gpio_early_init(); |
| gpio_early_init_uart(); |
| #ifdef CONFIG_LCD |
| tegra_lcd_early_init(gd->fdt_blob); |
| #endif |
| |
| return 0; |
| } |
| #endif /* EARLY_INIT */ |
| |
| int board_late_init(void) |
| { |
| #ifdef CONFIG_LCD |
| /* Make sure we finish initing the LCD */ |
| tegra_lcd_check_next_stage(gd->fdt_blob, 1); |
| #endif |
| return 0; |
| } |