| /* |
| * common.h - Common definitions for both Kernel and user-mode utilities |
| * |
| * Copyright (C) 2005, 2006 |
| * Avishay Traeger (avishay@gmail.com) |
| * Copyright (C) 2008, 2009 |
| * Boaz Harrosh <ooo@electrozaur.com> |
| * |
| * Copyrights for code taken from ext2: |
| * Copyright (C) 1992, 1993, 1994, 1995 |
| * Remy Card (card@masi.ibp.fr) |
| * Laboratoire MASI - Institut Blaise Pascal |
| * Universite Pierre et Marie Curie (Paris VI) |
| * from |
| * linux/fs/minix/inode.c |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * |
| * This file is part of exofs. |
| * |
| * exofs is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation. Since it is based on ext2, and the only |
| * valid version of GPL for the Linux kernel is version 2, the only valid |
| * version of GPL for exofs is version 2. |
| * |
| * exofs is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with exofs; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #ifndef __EXOFS_COM_H__ |
| #define __EXOFS_COM_H__ |
| |
| #include <linux/types.h> |
| |
| #include <scsi/osd_attributes.h> |
| #include <scsi/osd_initiator.h> |
| #include <scsi/osd_sec.h> |
| |
| /**************************************************************************** |
| * Object ID related defines |
| * NOTE: inode# = object ID - EXOFS_OBJ_OFF |
| ****************************************************************************/ |
| #define EXOFS_MIN_PID 0x10000 /* Smallest partition ID */ |
| #define EXOFS_OBJ_OFF 0x10000 /* offset for objects */ |
| #define EXOFS_SUPER_ID 0x10000 /* object ID for on-disk superblock */ |
| #define EXOFS_DEVTABLE_ID 0x10001 /* object ID for on-disk device table */ |
| #define EXOFS_ROOT_ID 0x10002 /* object ID for root directory */ |
| |
| /* exofs Application specific page/attribute */ |
| /* Inode attrs */ |
| # define EXOFS_APAGE_FS_DATA (OSD_APAGE_APP_DEFINED_FIRST + 3) |
| # define EXOFS_ATTR_INODE_DATA 1 |
| # define EXOFS_ATTR_INODE_FILE_LAYOUT 2 |
| # define EXOFS_ATTR_INODE_DIR_LAYOUT 3 |
| /* Partition attrs */ |
| # define EXOFS_APAGE_SB_DATA (0xF0000000U + 3) |
| # define EXOFS_ATTR_SB_STATS 1 |
| |
| /* |
| * The maximum number of files we can have is limited by the size of the |
| * inode number. This is the largest object ID that the file system supports. |
| * Object IDs 0, 1, and 2 are always in use (see above defines). |
| */ |
| enum { |
| EXOFS_MAX_INO_ID = (sizeof(ino_t) * 8 == 64) ? ULLONG_MAX : |
| (1ULL << (sizeof(ino_t) * 8ULL - 1ULL)), |
| EXOFS_MAX_ID = (EXOFS_MAX_INO_ID - 1 - EXOFS_OBJ_OFF), |
| }; |
| |
| /**************************************************************************** |
| * Misc. |
| ****************************************************************************/ |
| #define EXOFS_BLKSHIFT 12 |
| #define EXOFS_BLKSIZE (1UL << EXOFS_BLKSHIFT) |
| |
| /**************************************************************************** |
| * superblock-related things |
| ****************************************************************************/ |
| #define EXOFS_SUPER_MAGIC 0x5DF5 |
| |
| /* |
| * The file system control block - stored in object EXOFS_SUPER_ID's data. |
| * This is where the in-memory superblock is stored on disk. |
| */ |
| enum {EXOFS_FSCB_VER = 1, EXOFS_DT_VER = 1}; |
| struct exofs_fscb { |
| __le64 s_nextid; /* Only used after mkfs */ |
| __le64 s_numfiles; /* Only used after mkfs */ |
| __le32 s_version; /* == EXOFS_FSCB_VER */ |
| __le16 s_magic; /* Magic signature */ |
| __le16 s_newfs; /* Non-zero if this is a new fs */ |
| |
| /* From here on it's a static part, only written by mkexofs */ |
| __le64 s_dev_table_oid; /* Resurved, not used */ |
| __le64 s_dev_table_count; /* == 0 means no dev_table */ |
| } __packed; |
| |
| /* |
| * This struct is set on the FS partition's attributes. |
| * [EXOFS_APAGE_SB_DATA, EXOFS_ATTR_SB_STATS] and is written together |
| * with the create command, to atomically persist the sb writeable information. |
| */ |
| struct exofs_sb_stats { |
| __le64 s_nextid; /* Highest object ID used */ |
| __le64 s_numfiles; /* Number of files on fs */ |
| } __packed; |
| |
| /* |
| * Describes the raid used in the FS. It is part of the device table. |
| * This here is taken from the pNFS-objects definition. In exofs we |
| * use one raid policy through-out the filesystem. (NOTE: the funny |
| * alignment at beginning. We take care of it at exofs_device_table. |
| */ |
| struct exofs_dt_data_map { |
| __le32 cb_num_comps; |
| __le64 cb_stripe_unit; |
| __le32 cb_group_width; |
| __le32 cb_group_depth; |
| __le32 cb_mirror_cnt; |
| __le32 cb_raid_algorithm; |
| } __packed; |
| |
| /* |
| * This is an osd device information descriptor. It is a single entry in |
| * the exofs device table. It describes an osd target lun which |
| * contains data belonging to this FS. (Same partition_id on all devices) |
| */ |
| struct exofs_dt_device_info { |
| __le32 systemid_len; |
| u8 systemid[OSD_SYSTEMID_LEN]; |
| __le64 long_name_offset; /* If !0 then offset-in-file */ |
| __le32 osdname_len; /* */ |
| u8 osdname[44]; /* Embbeded, Usually an asci uuid */ |
| } __packed; |
| |
| /* |
| * The EXOFS device table - stored in object EXOFS_DEVTABLE_ID's data. |
| * It contains the raid used for this multy-device FS and an array of |
| * participating devices. |
| */ |
| struct exofs_device_table { |
| __le32 dt_version; /* == EXOFS_DT_VER */ |
| struct exofs_dt_data_map dt_data_map; /* Raid policy to use */ |
| |
| /* Resurved space For future use. Total includeing this: |
| * (8 * sizeof(le64)) |
| */ |
| __le64 __Resurved[4]; |
| |
| __le64 dt_num_devices; /* Array size */ |
| struct exofs_dt_device_info dt_dev_table[]; /* Array of devices */ |
| } __packed; |
| |
| /**************************************************************************** |
| * inode-related things |
| ****************************************************************************/ |
| #define EXOFS_IDATA 5 |
| |
| /* |
| * The file control block - stored in an object's attributes. This is where |
| * the in-memory inode is stored on disk. |
| */ |
| struct exofs_fcb { |
| __le64 i_size; /* Size of the file */ |
| __le16 i_mode; /* File mode */ |
| __le16 i_links_count; /* Links count */ |
| __le32 i_uid; /* Owner Uid */ |
| __le32 i_gid; /* Group Id */ |
| __le32 i_atime; /* Access time */ |
| __le32 i_ctime; /* Creation time */ |
| __le32 i_mtime; /* Modification time */ |
| __le32 i_flags; /* File flags (unused for now)*/ |
| __le32 i_generation; /* File version (for NFS) */ |
| __le32 i_data[EXOFS_IDATA]; /* Short symlink names and device #s */ |
| }; |
| |
| #define EXOFS_INO_ATTR_SIZE sizeof(struct exofs_fcb) |
| |
| /* This is the Attribute the fcb is stored in */ |
| static const struct __weak osd_attr g_attr_inode_data = ATTR_DEF( |
| EXOFS_APAGE_FS_DATA, |
| EXOFS_ATTR_INODE_DATA, |
| EXOFS_INO_ATTR_SIZE); |
| |
| /**************************************************************************** |
| * dentry-related things |
| ****************************************************************************/ |
| #define EXOFS_NAME_LEN 255 |
| |
| /* |
| * The on-disk directory entry |
| */ |
| struct exofs_dir_entry { |
| __le64 inode_no; /* inode number */ |
| __le16 rec_len; /* directory entry length */ |
| u8 name_len; /* name length */ |
| u8 file_type; /* umm...file type */ |
| char name[EXOFS_NAME_LEN]; /* file name */ |
| }; |
| |
| enum { |
| EXOFS_FT_UNKNOWN, |
| EXOFS_FT_REG_FILE, |
| EXOFS_FT_DIR, |
| EXOFS_FT_CHRDEV, |
| EXOFS_FT_BLKDEV, |
| EXOFS_FT_FIFO, |
| EXOFS_FT_SOCK, |
| EXOFS_FT_SYMLINK, |
| EXOFS_FT_MAX |
| }; |
| |
| #define EXOFS_DIR_PAD 4 |
| #define EXOFS_DIR_ROUND (EXOFS_DIR_PAD - 1) |
| #define EXOFS_DIR_REC_LEN(name_len) \ |
| (((name_len) + offsetof(struct exofs_dir_entry, name) + \ |
| EXOFS_DIR_ROUND) & ~EXOFS_DIR_ROUND) |
| |
| /* |
| * The on-disk (optional) layout structure. |
| * sits in an EXOFS_ATTR_INODE_FILE_LAYOUT or EXOFS_ATTR_INODE_DIR_LAYOUT |
| * attribute, attached to any inode, usually to a directory. |
| */ |
| |
| enum exofs_inode_layout_gen_functions { |
| LAYOUT_MOVING_WINDOW = 0, |
| LAYOUT_IMPLICT = 1, |
| }; |
| |
| struct exofs_on_disk_inode_layout { |
| __le16 gen_func; /* One of enum exofs_inode_layout_gen_functions */ |
| __le16 pad; |
| union { |
| /* gen_func == LAYOUT_MOVING_WINDOW (default) */ |
| struct exofs_layout_sliding_window { |
| __le32 num_devices; /* first n devices in global-table*/ |
| } sliding_window __packed; |
| |
| /* gen_func == LAYOUT_IMPLICT */ |
| struct exofs_layout_implict_list { |
| struct exofs_dt_data_map data_map; |
| /* Variable array of size data_map.cb_num_comps. These |
| * are device indexes of the devices in the global table |
| */ |
| __le32 dev_indexes[]; |
| } implict __packed; |
| }; |
| } __packed; |
| |
| static inline size_t exofs_on_disk_inode_layout_size(unsigned max_devs) |
| { |
| return sizeof(struct exofs_on_disk_inode_layout) + |
| max_devs * sizeof(__le32); |
| } |
| |
| #endif /*ifndef __EXOFS_COM_H__*/ |