| /* |
| * Copyright (C) 2012 Samsung Electronics. |
| * Kyungmin Park <kyungmin.park@samsung.com> |
| * Tomasz Figa <t.figa@samsung.com> |
| * |
| * This program is free software,you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/io.h> |
| #include <linux/init.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| |
| #include <asm/cacheflush.h> |
| #include <asm/cputype.h> |
| #include <asm/firmware.h> |
| #include <asm/hardware/cache-l2x0.h> |
| #include <asm/suspend.h> |
| |
| #include <mach/map.h> |
| |
| #include "common.h" |
| #include "smc.h" |
| |
| #define EXYNOS_BOOT_ADDR 0x8 |
| #define EXYNOS_BOOT_FLAG 0xc |
| |
| static void exynos_save_cp15(void) |
| { |
| /* Save Power control and Diagnostic registers */ |
| asm ("mrc p15, 0, %0, c15, c0, 0\n" |
| "mrc p15, 0, %1, c15, c0, 1\n" |
| : "=r" (cp15_save_power), "=r" (cp15_save_diag) |
| : : "cc"); |
| } |
| |
| static int exynos_do_idle(unsigned long mode) |
| { |
| switch (mode) { |
| case FW_DO_IDLE_AFTR: |
| if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) |
| exynos_save_cp15(); |
| __raw_writel(virt_to_phys(exynos_cpu_resume_ns), |
| sysram_ns_base_addr + 0x24); |
| __raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20); |
| if (soc_is_exynos3250()) { |
| flush_cache_all(); |
| exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE, |
| SMC_POWERSTATE_IDLE, 0); |
| exynos_smc(SMC_CMD_SHUTDOWN, OP_TYPE_CLUSTER, |
| SMC_POWERSTATE_IDLE, 0); |
| } else |
| exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0); |
| break; |
| case FW_DO_IDLE_SLEEP: |
| exynos_smc(SMC_CMD_SLEEP, 0, 0, 0); |
| } |
| return 0; |
| } |
| |
| static int exynos_cpu_boot(int cpu) |
| { |
| /* |
| * Exynos3250 doesn't need to send smc command for secondary CPU boot |
| * because Exynos3250 removes WFE in secure mode. |
| */ |
| if (soc_is_exynos3250()) |
| return 0; |
| |
| /* |
| * The second parameter of SMC_CMD_CPU1BOOT command means CPU id. |
| * But, Exynos4212 has only one secondary CPU so second parameter |
| * isn't used for informing secure firmware about CPU id. |
| */ |
| if (soc_is_exynos4212()) |
| cpu = 0; |
| |
| exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0); |
| return 0; |
| } |
| |
| static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) |
| { |
| void __iomem *boot_reg; |
| |
| if (!sysram_ns_base_addr) |
| return -ENODEV; |
| |
| boot_reg = sysram_ns_base_addr + 0x1c; |
| |
| /* |
| * Almost all Exynos-series of SoCs that run in secure mode don't need |
| * additional offset for every CPU, with Exynos4412 being the only |
| * exception. |
| */ |
| if (soc_is_exynos4412()) |
| boot_reg += 4 * cpu; |
| |
| __raw_writel(boot_addr, boot_reg); |
| return 0; |
| } |
| |
| static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr) |
| { |
| void __iomem *boot_reg; |
| |
| if (!sysram_ns_base_addr) |
| return -ENODEV; |
| |
| boot_reg = sysram_ns_base_addr + 0x1c; |
| |
| if (soc_is_exynos4412()) |
| boot_reg += 4 * cpu; |
| |
| *boot_addr = __raw_readl(boot_reg); |
| return 0; |
| } |
| |
| static int exynos_cpu_suspend(unsigned long arg) |
| { |
| flush_cache_all(); |
| outer_flush_all(); |
| |
| exynos_smc(SMC_CMD_SLEEP, 0, 0, 0); |
| |
| pr_info("Failed to suspend the system\n"); |
| writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG); |
| return 1; |
| } |
| |
| static int exynos_suspend(void) |
| { |
| if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) |
| exynos_save_cp15(); |
| |
| writel(EXYNOS_SLEEP_MAGIC, sysram_ns_base_addr + EXYNOS_BOOT_FLAG); |
| writel(virt_to_phys(exynos_cpu_resume_ns), |
| sysram_ns_base_addr + EXYNOS_BOOT_ADDR); |
| |
| return cpu_suspend(0, exynos_cpu_suspend); |
| } |
| |
| static int exynos_resume(void) |
| { |
| writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG); |
| |
| return 0; |
| } |
| |
| static const struct firmware_ops exynos_firmware_ops = { |
| .do_idle = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL, |
| .set_cpu_boot_addr = exynos_set_cpu_boot_addr, |
| .get_cpu_boot_addr = exynos_get_cpu_boot_addr, |
| .cpu_boot = exynos_cpu_boot, |
| .suspend = IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL, |
| .resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL, |
| }; |
| |
| static void exynos_l2_write_sec(unsigned long val, unsigned reg) |
| { |
| static int l2cache_enabled; |
| |
| switch (reg) { |
| case L2X0_CTRL: |
| if (val & L2X0_CTRL_EN) { |
| /* |
| * Before the cache can be enabled, due to firmware |
| * design, SMC_CMD_L2X0INVALL must be called. |
| */ |
| if (!l2cache_enabled) { |
| exynos_smc(SMC_CMD_L2X0INVALL, 0, 0, 0); |
| l2cache_enabled = 1; |
| } |
| } else { |
| l2cache_enabled = 0; |
| } |
| exynos_smc(SMC_CMD_L2X0CTRL, val, 0, 0); |
| break; |
| |
| case L2X0_DEBUG_CTRL: |
| exynos_smc(SMC_CMD_L2X0DEBUG, val, 0, 0); |
| break; |
| |
| default: |
| WARN_ONCE(1, "%s: ignoring write to reg 0x%x\n", __func__, reg); |
| } |
| } |
| |
| static void exynos_l2_configure(const struct l2x0_regs *regs) |
| { |
| exynos_smc(SMC_CMD_L2X0SETUP1, regs->tag_latency, regs->data_latency, |
| regs->prefetch_ctrl); |
| exynos_smc(SMC_CMD_L2X0SETUP2, regs->pwr_ctrl, regs->aux_ctrl, 0); |
| } |
| |
| void __init exynos_firmware_init(void) |
| { |
| struct device_node *nd; |
| const __be32 *addr; |
| |
| nd = of_find_compatible_node(NULL, NULL, |
| "samsung,secure-firmware"); |
| if (!nd) |
| return; |
| |
| addr = of_get_address(nd, 0, NULL, NULL); |
| if (!addr) { |
| pr_err("%s: No address specified.\n", __func__); |
| return; |
| } |
| |
| pr_info("Running under secure firmware.\n"); |
| |
| register_firmware_ops(&exynos_firmware_ops); |
| |
| /* |
| * Exynos 4 SoCs (based on Cortex A9 and equipped with L2C-310), |
| * running under secure firmware, require certain registers of L2 |
| * cache controller to be written in secure mode. Here .write_sec |
| * callback is provided to perform necessary SMC calls. |
| */ |
| if (IS_ENABLED(CONFIG_CACHE_L2X0) && |
| read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { |
| outer_cache.write_sec = exynos_l2_write_sec; |
| outer_cache.configure = exynos_l2_configure; |
| } |
| } |
| |
| #define REG_CPU_STATE_ADDR (sysram_ns_base_addr + 0x28) |
| #define BOOT_MODE_MASK 0x1f |
| |
| void exynos_set_boot_flag(unsigned int cpu, unsigned int mode) |
| { |
| unsigned int tmp; |
| |
| tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4); |
| |
| if (mode & BOOT_MODE_MASK) |
| tmp &= ~BOOT_MODE_MASK; |
| |
| tmp |= mode; |
| __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4); |
| } |
| |
| void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode) |
| { |
| unsigned int tmp; |
| |
| tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4); |
| tmp &= ~mode; |
| __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4); |
| } |