| /* |
| * SAMSUNG EXYNOS Flattened Device Tree enabled machine |
| * |
| * Copyright (c) 2010-2014 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/serial_s3c.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_fdt.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_domain.h> |
| #include <linux/irqchip.h> |
| |
| #include <asm/cacheflush.h> |
| #include <asm/hardware/cache-l2x0.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/memory.h> |
| |
| #include <mach/map.h> |
| |
| #include "common.h" |
| #include "mfc.h" |
| #include "regs-pmu.h" |
| |
| void __iomem *pmu_base_addr; |
| |
| static struct map_desc exynos4_iodesc[] __initdata = { |
| { |
| .virtual = (unsigned long)S5P_VA_SROMC, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_CMU, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), |
| .length = SZ_128K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_COREPERI_BASE, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI), |
| .length = SZ_8K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_DMC0, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_DMC1, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_DMC1), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static struct map_desc exynos5_iodesc[] __initdata = { |
| { |
| .virtual = (unsigned long)S5P_VA_SROMC, |
| .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_CMU, |
| .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), |
| .length = 144 * SZ_1K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static struct platform_device exynos_cpuidle = { |
| .name = "exynos_cpuidle", |
| #ifdef CONFIG_ARM_EXYNOS_CPUIDLE |
| .dev.platform_data = exynos_enter_aftr, |
| #endif |
| .id = -1, |
| }; |
| |
| void __iomem *sysram_base_addr; |
| void __iomem *sysram_ns_base_addr; |
| |
| void __init exynos_sysram_init(void) |
| { |
| struct device_node *node; |
| |
| for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") { |
| if (!of_device_is_available(node)) |
| continue; |
| sysram_base_addr = of_iomap(node, 0); |
| break; |
| } |
| |
| for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") { |
| if (!of_device_is_available(node)) |
| continue; |
| sysram_ns_base_addr = of_iomap(node, 0); |
| break; |
| } |
| } |
| |
| static void __init exynos_init_late(void) |
| { |
| if (of_machine_is_compatible("samsung,exynos5440")) |
| /* to be supported later */ |
| return; |
| |
| exynos_pm_init(); |
| } |
| |
| static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, |
| int depth, void *data) |
| { |
| struct map_desc iodesc; |
| const __be32 *reg; |
| int len; |
| |
| if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") && |
| !of_flat_dt_is_compatible(node, "samsung,exynos5440-clock")) |
| return 0; |
| |
| reg = of_get_flat_dt_prop(node, "reg", &len); |
| if (reg == NULL || len != (sizeof(unsigned long) * 2)) |
| return 0; |
| |
| iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0])); |
| iodesc.length = be32_to_cpu(reg[1]) - 1; |
| iodesc.virtual = (unsigned long)S5P_VA_CHIPID; |
| iodesc.type = MT_DEVICE; |
| iotable_init(&iodesc, 1); |
| return 1; |
| } |
| |
| /* |
| * exynos_map_io |
| * |
| * register the standard cpu IO areas |
| */ |
| static void __init exynos_map_io(void) |
| { |
| if (soc_is_exynos4()) |
| iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); |
| |
| if (soc_is_exynos5()) |
| iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); |
| } |
| |
| static void __init exynos_init_io(void) |
| { |
| debug_ll_io_init(); |
| |
| of_scan_flat_dt(exynos_fdt_map_chipid, NULL); |
| |
| /* detect cpu id and rev. */ |
| s5p_init_cpu(S5P_VA_CHIPID); |
| |
| exynos_map_io(); |
| } |
| |
| /* |
| * Set or clear the USE_DELAYED_RESET_ASSERTION option. Used by smp code |
| * and suspend. |
| * |
| * This is necessary only on Exynos4 SoCs. When system is running |
| * USE_DELAYED_RESET_ASSERTION should be set so the ARM CLK clock down |
| * feature could properly detect global idle state when secondary CPU is |
| * powered down. |
| * |
| * However this should not be set when such system is going into suspend. |
| */ |
| void exynos_set_delayed_reset_assertion(bool enable) |
| { |
| if (of_machine_is_compatible("samsung,exynos4")) { |
| unsigned int tmp, core_id; |
| |
| for (core_id = 0; core_id < num_possible_cpus(); core_id++) { |
| tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id)); |
| if (enable) |
| tmp |= S5P_USE_DELAYED_RESET_ASSERTION; |
| else |
| tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION); |
| pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id)); |
| } |
| } |
| } |
| |
| /* |
| * Apparently, these SoCs are not able to wake-up from suspend using |
| * the PMU. Too bad. Should they suddenly become capable of such a |
| * feat, the matches below should be moved to suspend.c. |
| */ |
| static const struct of_device_id exynos_dt_pmu_match[] = { |
| { .compatible = "samsung,exynos5260-pmu" }, |
| { .compatible = "samsung,exynos5410-pmu" }, |
| { /*sentinel*/ }, |
| }; |
| |
| static void exynos_map_pmu(void) |
| { |
| struct device_node *np; |
| |
| np = of_find_matching_node(NULL, exynos_dt_pmu_match); |
| if (np) |
| pmu_base_addr = of_iomap(np, 0); |
| } |
| |
| static void __init exynos_init_irq(void) |
| { |
| irqchip_init(); |
| /* |
| * Since platsmp.c needs pmu base address by the time |
| * DT is not unflatten so we can't use DT APIs before |
| * init_irq |
| */ |
| exynos_map_pmu(); |
| } |
| |
| static const struct of_device_id exynos_cpufreq_matches[] = { |
| { .compatible = "samsung,exynos3250", .data = "cpufreq-dt" }, |
| { .compatible = "samsung,exynos4210", .data = "cpufreq-dt" }, |
| { .compatible = "samsung,exynos4212", .data = "cpufreq-dt" }, |
| { .compatible = "samsung,exynos4412", .data = "cpufreq-dt" }, |
| { .compatible = "samsung,exynos5250", .data = "cpufreq-dt" }, |
| { /* sentinel */ } |
| }; |
| |
| static void __init exynos_cpufreq_init(void) |
| { |
| struct device_node *root = of_find_node_by_path("/"); |
| const struct of_device_id *match; |
| |
| match = of_match_node(exynos_cpufreq_matches, root); |
| if (!match) { |
| platform_device_register_simple("exynos-cpufreq", -1, NULL, 0); |
| return; |
| } |
| |
| platform_device_register_simple(match->data, -1, NULL, 0); |
| } |
| |
| static void __init exynos_dt_machine_init(void) |
| { |
| /* |
| * This is called from smp_prepare_cpus if we've built for SMP, but |
| * we still need to set it up for PM and firmware ops if not. |
| */ |
| if (!IS_ENABLED(CONFIG_SMP)) |
| exynos_sysram_init(); |
| |
| #if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE) |
| if (of_machine_is_compatible("samsung,exynos4210") || |
| of_machine_is_compatible("samsung,exynos3250")) |
| exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data; |
| #endif |
| if (of_machine_is_compatible("samsung,exynos4210") || |
| of_machine_is_compatible("samsung,exynos4212") || |
| (of_machine_is_compatible("samsung,exynos4412") && |
| of_machine_is_compatible("samsung,trats2")) || |
| of_machine_is_compatible("samsung,exynos3250") || |
| of_machine_is_compatible("samsung,exynos5250")) |
| platform_device_register(&exynos_cpuidle); |
| |
| exynos_cpufreq_init(); |
| |
| of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); |
| } |
| |
| static char const *const exynos_dt_compat[] __initconst = { |
| "samsung,exynos3", |
| "samsung,exynos3250", |
| "samsung,exynos4", |
| "samsung,exynos4210", |
| "samsung,exynos4212", |
| "samsung,exynos4412", |
| "samsung,exynos4415", |
| "samsung,exynos5", |
| "samsung,exynos5250", |
| "samsung,exynos5260", |
| "samsung,exynos5420", |
| "samsung,exynos5440", |
| NULL |
| }; |
| |
| static void __init exynos_reserve(void) |
| { |
| #ifdef CONFIG_S5P_DEV_MFC |
| int i; |
| char *mfc_mem[] = { |
| "samsung,mfc-v5", |
| "samsung,mfc-v6", |
| "samsung,mfc-v7", |
| "samsung,mfc-v8", |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(mfc_mem); i++) |
| if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i])) |
| break; |
| #endif |
| } |
| |
| static void __init exynos_dt_fixup(void) |
| { |
| /* |
| * Some versions of uboot pass garbage entries in the memory node, |
| * use the old CONFIG_ARM_NR_BANKS |
| */ |
| of_fdt_limit_memory(8); |
| } |
| |
| DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)") |
| /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ |
| /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ |
| .l2c_aux_val = 0x3c400001, |
| .l2c_aux_mask = 0xc20fffff, |
| .smp = smp_ops(exynos_smp_ops), |
| .map_io = exynos_init_io, |
| .init_early = exynos_firmware_init, |
| .init_irq = exynos_init_irq, |
| .init_machine = exynos_dt_machine_init, |
| .init_late = exynos_init_late, |
| .dt_compat = exynos_dt_compat, |
| .reserve = exynos_reserve, |
| .dt_fixup = exynos_dt_fixup, |
| MACHINE_END |