| #!/usr/bin/env perl |
| |
| # ==================================================================== |
| # Written by Andy Polyakov <appro@openssl.org> for the OpenSSL |
| # project. The module is, however, dual licensed under OpenSSL and |
| # CRYPTOGAMS licenses depending on where you obtain it. For further |
| # details see http://www.openssl.org/~appro/cryptogams/. |
| # |
| # Permission to use under GPL terms is granted. |
| # ==================================================================== |
| |
| # SHA256 block procedure for ARMv4. May 2007. |
| |
| # Performance is ~2x better than gcc 3.4 generated code and in "abso- |
| # lute" terms is ~2250 cycles per 64-byte block or ~35 cycles per |
| # byte [on single-issue Xscale PXA250 core]. |
| |
| # July 2010. |
| # |
| # Rescheduling for dual-issue pipeline resulted in 22% improvement on |
| # Cortex A8 core and ~20 cycles per processed byte. |
| |
| # February 2011. |
| # |
| # Profiler-assisted and platform-specific optimization resulted in 16% |
| # improvement on Cortex A8 core and ~15.4 cycles per processed byte. |
| |
| # September 2013. |
| # |
| # Add NEON implementation. On Cortex A8 it was measured to process one |
| # byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon |
| # S4 does it in 12.5 cycles too, but it's 50% faster than integer-only |
| # code (meaning that latter performs sub-optimally, nothing was done |
| # about it). |
| |
| # May 2014. |
| # |
| # Add ARMv8 code path performing at 2.0 cpb on Apple A7. |
| |
| while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {} |
| open STDOUT,">$output"; |
| |
| $ctx="r0"; $t0="r0"; |
| $inp="r1"; $t4="r1"; |
| $len="r2"; $t1="r2"; |
| $T1="r3"; $t3="r3"; |
| $A="r4"; |
| $B="r5"; |
| $C="r6"; |
| $D="r7"; |
| $E="r8"; |
| $F="r9"; |
| $G="r10"; |
| $H="r11"; |
| @V=($A,$B,$C,$D,$E,$F,$G,$H); |
| $t2="r12"; |
| $Ktbl="r14"; |
| |
| @Sigma0=( 2,13,22); |
| @Sigma1=( 6,11,25); |
| @sigma0=( 7,18, 3); |
| @sigma1=(17,19,10); |
| |
| sub BODY_00_15 { |
| my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; |
| |
| $code.=<<___ if ($i<16); |
| #if __ARM_ARCH__>=7 |
| @ ldr $t1,[$inp],#4 @ $i |
| # if $i==15 |
| str $inp,[sp,#17*4] @ make room for $t4 |
| # endif |
| eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` |
| add $a,$a,$t2 @ h+=Maj(a,b,c) from the past |
| eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e) |
| # ifndef __ARMEB__ |
| rev $t1,$t1 |
| # endif |
| #else |
| @ ldrb $t1,[$inp,#3] @ $i |
| add $a,$a,$t2 @ h+=Maj(a,b,c) from the past |
| ldrb $t2,[$inp,#2] |
| ldrb $t0,[$inp,#1] |
| orr $t1,$t1,$t2,lsl#8 |
| ldrb $t2,[$inp],#4 |
| orr $t1,$t1,$t0,lsl#16 |
| # if $i==15 |
| str $inp,[sp,#17*4] @ make room for $t4 |
| # endif |
| eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` |
| orr $t1,$t1,$t2,lsl#24 |
| eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e) |
| #endif |
| ___ |
| $code.=<<___; |
| ldr $t2,[$Ktbl],#4 @ *K256++ |
| add $h,$h,$t1 @ h+=X[i] |
| str $t1,[sp,#`$i%16`*4] |
| eor $t1,$f,$g |
| add $h,$h,$t0,ror#$Sigma1[0] @ h+=Sigma1(e) |
| and $t1,$t1,$e |
| add $h,$h,$t2 @ h+=K256[i] |
| eor $t1,$t1,$g @ Ch(e,f,g) |
| eor $t0,$a,$a,ror#`$Sigma0[1]-$Sigma0[0]` |
| add $h,$h,$t1 @ h+=Ch(e,f,g) |
| #if $i==31 |
| and $t2,$t2,#0xff |
| cmp $t2,#0xf2 @ done? |
| #endif |
| #if $i<15 |
| # if __ARM_ARCH__>=7 |
| ldr $t1,[$inp],#4 @ prefetch |
| # else |
| ldrb $t1,[$inp,#3] |
| # endif |
| eor $t2,$a,$b @ a^b, b^c in next round |
| #else |
| ldr $t1,[sp,#`($i+2)%16`*4] @ from future BODY_16_xx |
| eor $t2,$a,$b @ a^b, b^c in next round |
| ldr $t4,[sp,#`($i+15)%16`*4] @ from future BODY_16_xx |
| #endif |
| eor $t0,$t0,$a,ror#`$Sigma0[2]-$Sigma0[0]` @ Sigma0(a) |
| and $t3,$t3,$t2 @ (b^c)&=(a^b) |
| add $d,$d,$h @ d+=h |
| eor $t3,$t3,$b @ Maj(a,b,c) |
| add $h,$h,$t0,ror#$Sigma0[0] @ h+=Sigma0(a) |
| @ add $h,$h,$t3 @ h+=Maj(a,b,c) |
| ___ |
| ($t2,$t3)=($t3,$t2); |
| } |
| |
| sub BODY_16_XX { |
| my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; |
| |
| $code.=<<___; |
| @ ldr $t1,[sp,#`($i+1)%16`*4] @ $i |
| @ ldr $t4,[sp,#`($i+14)%16`*4] |
| mov $t0,$t1,ror#$sigma0[0] |
| add $a,$a,$t2 @ h+=Maj(a,b,c) from the past |
| mov $t2,$t4,ror#$sigma1[0] |
| eor $t0,$t0,$t1,ror#$sigma0[1] |
| eor $t2,$t2,$t4,ror#$sigma1[1] |
| eor $t0,$t0,$t1,lsr#$sigma0[2] @ sigma0(X[i+1]) |
| ldr $t1,[sp,#`($i+0)%16`*4] |
| eor $t2,$t2,$t4,lsr#$sigma1[2] @ sigma1(X[i+14]) |
| ldr $t4,[sp,#`($i+9)%16`*4] |
| |
| add $t2,$t2,$t0 |
| eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` @ from BODY_00_15 |
| add $t1,$t1,$t2 |
| eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e) |
| add $t1,$t1,$t4 @ X[i] |
| ___ |
| &BODY_00_15(@_); |
| } |
| |
| $code=<<___; |
| #ifndef __KERNEL__ |
| # include "arm_arch.h" |
| #else |
| # define __ARM_ARCH__ __LINUX_ARM_ARCH__ |
| # define __ARM_MAX_ARCH__ 7 |
| #endif |
| |
| .text |
| #if __ARM_ARCH__<7 |
| .code 32 |
| #else |
| .syntax unified |
| # ifdef __thumb2__ |
| # define adrl adr |
| .thumb |
| # else |
| .code 32 |
| # endif |
| #endif |
| |
| .type K256,%object |
| .align 5 |
| K256: |
| .word 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 |
| .word 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 |
| .word 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 |
| .word 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 |
| .word 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc |
| .word 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da |
| .word 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 |
| .word 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 |
| .word 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 |
| .word 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 |
| .word 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 |
| .word 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 |
| .word 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 |
| .word 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 |
| .word 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 |
| .word 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 |
| .size K256,.-K256 |
| .word 0 @ terminator |
| #if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) |
| .LOPENSSL_armcap: |
| .word OPENSSL_armcap_P-sha256_block_data_order |
| #endif |
| .align 5 |
| |
| .global sha256_block_data_order |
| .type sha256_block_data_order,%function |
| sha256_block_data_order: |
| #if __ARM_ARCH__<7 |
| sub r3,pc,#8 @ sha256_block_data_order |
| #else |
| adr r3,sha256_block_data_order |
| #endif |
| #if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) |
| ldr r12,.LOPENSSL_armcap |
| ldr r12,[r3,r12] @ OPENSSL_armcap_P |
| tst r12,#ARMV8_SHA256 |
| bne .LARMv8 |
| tst r12,#ARMV7_NEON |
| bne .LNEON |
| #endif |
| add $len,$inp,$len,lsl#6 @ len to point at the end of inp |
| stmdb sp!,{$ctx,$inp,$len,r4-r11,lr} |
| ldmia $ctx,{$A,$B,$C,$D,$E,$F,$G,$H} |
| sub $Ktbl,r3,#256+32 @ K256 |
| sub sp,sp,#16*4 @ alloca(X[16]) |
| .Loop: |
| # if __ARM_ARCH__>=7 |
| ldr $t1,[$inp],#4 |
| # else |
| ldrb $t1,[$inp,#3] |
| # endif |
| eor $t3,$B,$C @ magic |
| eor $t2,$t2,$t2 |
| ___ |
| for($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } |
| $code.=".Lrounds_16_xx:\n"; |
| for (;$i<32;$i++) { &BODY_16_XX($i,@V); unshift(@V,pop(@V)); } |
| $code.=<<___; |
| #if __ARM_ARCH__>=7 |
| ite eq @ Thumb2 thing, sanity check in ARM |
| #endif |
| ldreq $t3,[sp,#16*4] @ pull ctx |
| bne .Lrounds_16_xx |
| |
| add $A,$A,$t2 @ h+=Maj(a,b,c) from the past |
| ldr $t0,[$t3,#0] |
| ldr $t1,[$t3,#4] |
| ldr $t2,[$t3,#8] |
| add $A,$A,$t0 |
| ldr $t0,[$t3,#12] |
| add $B,$B,$t1 |
| ldr $t1,[$t3,#16] |
| add $C,$C,$t2 |
| ldr $t2,[$t3,#20] |
| add $D,$D,$t0 |
| ldr $t0,[$t3,#24] |
| add $E,$E,$t1 |
| ldr $t1,[$t3,#28] |
| add $F,$F,$t2 |
| ldr $inp,[sp,#17*4] @ pull inp |
| ldr $t2,[sp,#18*4] @ pull inp+len |
| add $G,$G,$t0 |
| add $H,$H,$t1 |
| stmia $t3,{$A,$B,$C,$D,$E,$F,$G,$H} |
| cmp $inp,$t2 |
| sub $Ktbl,$Ktbl,#256 @ rewind Ktbl |
| bne .Loop |
| |
| add sp,sp,#`16+3`*4 @ destroy frame |
| #if __ARM_ARCH__>=5 |
| ldmia sp!,{r4-r11,pc} |
| #else |
| ldmia sp!,{r4-r11,lr} |
| tst lr,#1 |
| moveq pc,lr @ be binary compatible with V4, yet |
| bx lr @ interoperable with Thumb ISA:-) |
| #endif |
| .size sha256_block_data_order,.-sha256_block_data_order |
| ___ |
| ###################################################################### |
| # NEON stuff |
| # |
| {{{ |
| my @X=map("q$_",(0..3)); |
| my ($T0,$T1,$T2,$T3,$T4,$T5)=("q8","q9","q10","q11","d24","d25"); |
| my $Xfer=$t4; |
| my $j=0; |
| |
| sub Dlo() { shift=~m|q([1]?[0-9])|?"d".($1*2):""; } |
| sub Dhi() { shift=~m|q([1]?[0-9])|?"d".($1*2+1):""; } |
| |
| sub AUTOLOAD() # thunk [simplified] x86-style perlasm |
| { my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./; |
| my $arg = pop; |
| $arg = "#$arg" if ($arg*1 eq $arg); |
| $code .= "\t$opcode\t".join(',',@_,$arg)."\n"; |
| } |
| |
| sub Xupdate() |
| { use integer; |
| my $body = shift; |
| my @insns = (&$body,&$body,&$body,&$body); |
| my ($a,$b,$c,$d,$e,$f,$g,$h); |
| |
| &vext_8 ($T0,@X[0],@X[1],4); # X[1..4] |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vext_8 ($T1,@X[2],@X[3],4); # X[9..12] |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vshr_u32 ($T2,$T0,$sigma0[0]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vadd_i32 (@X[0],@X[0],$T1); # X[0..3] += X[9..12] |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vshr_u32 ($T1,$T0,$sigma0[2]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vsli_32 ($T2,$T0,32-$sigma0[0]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vshr_u32 ($T3,$T0,$sigma0[1]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &veor ($T1,$T1,$T2); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vsli_32 ($T3,$T0,32-$sigma0[1]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vshr_u32 ($T4,&Dhi(@X[3]),$sigma1[0]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &veor ($T1,$T1,$T3); # sigma0(X[1..4]) |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vsli_32 ($T4,&Dhi(@X[3]),32-$sigma1[0]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vshr_u32 ($T5,&Dhi(@X[3]),$sigma1[2]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vadd_i32 (@X[0],@X[0],$T1); # X[0..3] += sigma0(X[1..4]) |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &veor ($T5,$T5,$T4); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vshr_u32 ($T4,&Dhi(@X[3]),$sigma1[1]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vsli_32 ($T4,&Dhi(@X[3]),32-$sigma1[1]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &veor ($T5,$T5,$T4); # sigma1(X[14..15]) |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vadd_i32 (&Dlo(@X[0]),&Dlo(@X[0]),$T5);# X[0..1] += sigma1(X[14..15]) |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vshr_u32 ($T4,&Dlo(@X[0]),$sigma1[0]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vsli_32 ($T4,&Dlo(@X[0]),32-$sigma1[0]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vshr_u32 ($T5,&Dlo(@X[0]),$sigma1[2]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &veor ($T5,$T5,$T4); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vshr_u32 ($T4,&Dlo(@X[0]),$sigma1[1]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vld1_32 ("{$T0}","[$Ktbl,:128]!"); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vsli_32 ($T4,&Dlo(@X[0]),32-$sigma1[1]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &veor ($T5,$T5,$T4); # sigma1(X[16..17]) |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vadd_i32 (&Dhi(@X[0]),&Dhi(@X[0]),$T5);# X[2..3] += sigma1(X[16..17]) |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vadd_i32 ($T0,$T0,@X[0]); |
| while($#insns>=2) { eval(shift(@insns)); } |
| &vst1_32 ("{$T0}","[$Xfer,:128]!"); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| push(@X,shift(@X)); # "rotate" X[] |
| } |
| |
| sub Xpreload() |
| { use integer; |
| my $body = shift; |
| my @insns = (&$body,&$body,&$body,&$body); |
| my ($a,$b,$c,$d,$e,$f,$g,$h); |
| |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vld1_32 ("{$T0}","[$Ktbl,:128]!"); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vrev32_8 (@X[0],@X[0]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vadd_i32 ($T0,$T0,@X[0]); |
| foreach (@insns) { eval; } # remaining instructions |
| &vst1_32 ("{$T0}","[$Xfer,:128]!"); |
| |
| push(@X,shift(@X)); # "rotate" X[] |
| } |
| |
| sub body_00_15 () { |
| ( |
| '($a,$b,$c,$d,$e,$f,$g,$h)=@V;'. |
| '&add ($h,$h,$t1)', # h+=X[i]+K[i] |
| '&eor ($t1,$f,$g)', |
| '&eor ($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))', |
| '&add ($a,$a,$t2)', # h+=Maj(a,b,c) from the past |
| '&and ($t1,$t1,$e)', |
| '&eor ($t2,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))', # Sigma1(e) |
| '&eor ($t0,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))', |
| '&eor ($t1,$t1,$g)', # Ch(e,f,g) |
| '&add ($h,$h,$t2,"ror#$Sigma1[0]")', # h+=Sigma1(e) |
| '&eor ($t2,$a,$b)', # a^b, b^c in next round |
| '&eor ($t0,$t0,$a,"ror#".($Sigma0[2]-$Sigma0[0]))', # Sigma0(a) |
| '&add ($h,$h,$t1)', # h+=Ch(e,f,g) |
| '&ldr ($t1,sprintf "[sp,#%d]",4*(($j+1)&15)) if (($j&15)!=15);'. |
| '&ldr ($t1,"[$Ktbl]") if ($j==15);'. |
| '&ldr ($t1,"[sp,#64]") if ($j==31)', |
| '&and ($t3,$t3,$t2)', # (b^c)&=(a^b) |
| '&add ($d,$d,$h)', # d+=h |
| '&add ($h,$h,$t0,"ror#$Sigma0[0]");'. # h+=Sigma0(a) |
| '&eor ($t3,$t3,$b)', # Maj(a,b,c) |
| '$j++; unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);' |
| ) |
| } |
| |
| $code.=<<___; |
| #if __ARM_MAX_ARCH__>=7 |
| .arch armv7-a |
| .fpu neon |
| |
| .global sha256_block_data_order_neon |
| .type sha256_block_data_order_neon,%function |
| .align 4 |
| sha256_block_data_order_neon: |
| .LNEON: |
| stmdb sp!,{r4-r12,lr} |
| |
| sub $H,sp,#16*4+16 |
| adrl $Ktbl,K256 |
| bic $H,$H,#15 @ align for 128-bit stores |
| mov $t2,sp |
| mov sp,$H @ alloca |
| add $len,$inp,$len,lsl#6 @ len to point at the end of inp |
| |
| vld1.8 {@X[0]},[$inp]! |
| vld1.8 {@X[1]},[$inp]! |
| vld1.8 {@X[2]},[$inp]! |
| vld1.8 {@X[3]},[$inp]! |
| vld1.32 {$T0},[$Ktbl,:128]! |
| vld1.32 {$T1},[$Ktbl,:128]! |
| vld1.32 {$T2},[$Ktbl,:128]! |
| vld1.32 {$T3},[$Ktbl,:128]! |
| vrev32.8 @X[0],@X[0] @ yes, even on |
| str $ctx,[sp,#64] |
| vrev32.8 @X[1],@X[1] @ big-endian |
| str $inp,[sp,#68] |
| mov $Xfer,sp |
| vrev32.8 @X[2],@X[2] |
| str $len,[sp,#72] |
| vrev32.8 @X[3],@X[3] |
| str $t2,[sp,#76] @ save original sp |
| vadd.i32 $T0,$T0,@X[0] |
| vadd.i32 $T1,$T1,@X[1] |
| vst1.32 {$T0},[$Xfer,:128]! |
| vadd.i32 $T2,$T2,@X[2] |
| vst1.32 {$T1},[$Xfer,:128]! |
| vadd.i32 $T3,$T3,@X[3] |
| vst1.32 {$T2},[$Xfer,:128]! |
| vst1.32 {$T3},[$Xfer,:128]! |
| |
| ldmia $ctx,{$A-$H} |
| sub $Xfer,$Xfer,#64 |
| ldr $t1,[sp,#0] |
| eor $t2,$t2,$t2 |
| eor $t3,$B,$C |
| b .L_00_48 |
| |
| .align 4 |
| .L_00_48: |
| ___ |
| &Xupdate(\&body_00_15); |
| &Xupdate(\&body_00_15); |
| &Xupdate(\&body_00_15); |
| &Xupdate(\&body_00_15); |
| $code.=<<___; |
| teq $t1,#0 @ check for K256 terminator |
| ldr $t1,[sp,#0] |
| sub $Xfer,$Xfer,#64 |
| bne .L_00_48 |
| |
| ldr $inp,[sp,#68] |
| ldr $t0,[sp,#72] |
| sub $Ktbl,$Ktbl,#256 @ rewind $Ktbl |
| teq $inp,$t0 |
| it eq |
| subeq $inp,$inp,#64 @ avoid SEGV |
| vld1.8 {@X[0]},[$inp]! @ load next input block |
| vld1.8 {@X[1]},[$inp]! |
| vld1.8 {@X[2]},[$inp]! |
| vld1.8 {@X[3]},[$inp]! |
| it ne |
| strne $inp,[sp,#68] |
| mov $Xfer,sp |
| ___ |
| &Xpreload(\&body_00_15); |
| &Xpreload(\&body_00_15); |
| &Xpreload(\&body_00_15); |
| &Xpreload(\&body_00_15); |
| $code.=<<___; |
| ldr $t0,[$t1,#0] |
| add $A,$A,$t2 @ h+=Maj(a,b,c) from the past |
| ldr $t2,[$t1,#4] |
| ldr $t3,[$t1,#8] |
| ldr $t4,[$t1,#12] |
| add $A,$A,$t0 @ accumulate |
| ldr $t0,[$t1,#16] |
| add $B,$B,$t2 |
| ldr $t2,[$t1,#20] |
| add $C,$C,$t3 |
| ldr $t3,[$t1,#24] |
| add $D,$D,$t4 |
| ldr $t4,[$t1,#28] |
| add $E,$E,$t0 |
| str $A,[$t1],#4 |
| add $F,$F,$t2 |
| str $B,[$t1],#4 |
| add $G,$G,$t3 |
| str $C,[$t1],#4 |
| add $H,$H,$t4 |
| str $D,[$t1],#4 |
| stmia $t1,{$E-$H} |
| |
| ittte ne |
| movne $Xfer,sp |
| ldrne $t1,[sp,#0] |
| eorne $t2,$t2,$t2 |
| ldreq sp,[sp,#76] @ restore original sp |
| itt ne |
| eorne $t3,$B,$C |
| bne .L_00_48 |
| |
| ldmia sp!,{r4-r12,pc} |
| .size sha256_block_data_order_neon,.-sha256_block_data_order_neon |
| #endif |
| ___ |
| }}} |
| ###################################################################### |
| # ARMv8 stuff |
| # |
| {{{ |
| my ($ABCD,$EFGH,$abcd)=map("q$_",(0..2)); |
| my @MSG=map("q$_",(8..11)); |
| my ($W0,$W1,$ABCD_SAVE,$EFGH_SAVE)=map("q$_",(12..15)); |
| my $Ktbl="r3"; |
| |
| $code.=<<___; |
| #if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) |
| |
| # ifdef __thumb2__ |
| # define INST(a,b,c,d) .byte c,d|0xc,a,b |
| # else |
| # define INST(a,b,c,d) .byte a,b,c,d |
| # endif |
| |
| .type sha256_block_data_order_armv8,%function |
| .align 5 |
| sha256_block_data_order_armv8: |
| .LARMv8: |
| vld1.32 {$ABCD,$EFGH},[$ctx] |
| # ifdef __thumb2__ |
| adr $Ktbl,.LARMv8 |
| sub $Ktbl,$Ktbl,#.LARMv8-K256 |
| # else |
| adrl $Ktbl,K256 |
| # endif |
| add $len,$inp,$len,lsl#6 @ len to point at the end of inp |
| |
| .Loop_v8: |
| vld1.8 {@MSG[0]-@MSG[1]},[$inp]! |
| vld1.8 {@MSG[2]-@MSG[3]},[$inp]! |
| vld1.32 {$W0},[$Ktbl]! |
| vrev32.8 @MSG[0],@MSG[0] |
| vrev32.8 @MSG[1],@MSG[1] |
| vrev32.8 @MSG[2],@MSG[2] |
| vrev32.8 @MSG[3],@MSG[3] |
| vmov $ABCD_SAVE,$ABCD @ offload |
| vmov $EFGH_SAVE,$EFGH |
| teq $inp,$len |
| ___ |
| for($i=0;$i<12;$i++) { |
| $code.=<<___; |
| vld1.32 {$W1},[$Ktbl]! |
| vadd.i32 $W0,$W0,@MSG[0] |
| sha256su0 @MSG[0],@MSG[1] |
| vmov $abcd,$ABCD |
| sha256h $ABCD,$EFGH,$W0 |
| sha256h2 $EFGH,$abcd,$W0 |
| sha256su1 @MSG[0],@MSG[2],@MSG[3] |
| ___ |
| ($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG)); |
| } |
| $code.=<<___; |
| vld1.32 {$W1},[$Ktbl]! |
| vadd.i32 $W0,$W0,@MSG[0] |
| vmov $abcd,$ABCD |
| sha256h $ABCD,$EFGH,$W0 |
| sha256h2 $EFGH,$abcd,$W0 |
| |
| vld1.32 {$W0},[$Ktbl]! |
| vadd.i32 $W1,$W1,@MSG[1] |
| vmov $abcd,$ABCD |
| sha256h $ABCD,$EFGH,$W1 |
| sha256h2 $EFGH,$abcd,$W1 |
| |
| vld1.32 {$W1},[$Ktbl] |
| vadd.i32 $W0,$W0,@MSG[2] |
| sub $Ktbl,$Ktbl,#256-16 @ rewind |
| vmov $abcd,$ABCD |
| sha256h $ABCD,$EFGH,$W0 |
| sha256h2 $EFGH,$abcd,$W0 |
| |
| vadd.i32 $W1,$W1,@MSG[3] |
| vmov $abcd,$ABCD |
| sha256h $ABCD,$EFGH,$W1 |
| sha256h2 $EFGH,$abcd,$W1 |
| |
| vadd.i32 $ABCD,$ABCD,$ABCD_SAVE |
| vadd.i32 $EFGH,$EFGH,$EFGH_SAVE |
| it ne |
| bne .Loop_v8 |
| |
| vst1.32 {$ABCD,$EFGH},[$ctx] |
| |
| ret @ bx lr |
| .size sha256_block_data_order_armv8,.-sha256_block_data_order_armv8 |
| #endif |
| ___ |
| }}} |
| $code.=<<___; |
| .asciz "SHA256 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by <appro\@openssl.org>" |
| .align 2 |
| #if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) |
| .comm OPENSSL_armcap_P,4,4 |
| #endif |
| ___ |
| |
| open SELF,$0; |
| while(<SELF>) { |
| next if (/^#!/); |
| last if (!s/^#/@/ and !/^$/); |
| print; |
| } |
| close SELF; |
| |
| { my %opcode = ( |
| "sha256h" => 0xf3000c40, "sha256h2" => 0xf3100c40, |
| "sha256su0" => 0xf3ba03c0, "sha256su1" => 0xf3200c40 ); |
| |
| sub unsha256 { |
| my ($mnemonic,$arg)=@_; |
| |
| if ($arg =~ m/q([0-9]+)(?:,\s*q([0-9]+))?,\s*q([0-9]+)/o) { |
| my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19) |
| |(($2&7)<<17)|(($2&8)<<4) |
| |(($3&7)<<1) |(($3&8)<<2); |
| # since ARMv7 instructions are always encoded little-endian. |
| # correct solution is to use .inst directive, but older |
| # assemblers don't implement it:-( |
| sprintf "INST(0x%02x,0x%02x,0x%02x,0x%02x)\t@ %s %s", |
| $word&0xff,($word>>8)&0xff, |
| ($word>>16)&0xff,($word>>24)&0xff, |
| $mnemonic,$arg; |
| } |
| } |
| } |
| |
| foreach (split($/,$code)) { |
| |
| s/\`([^\`]*)\`/eval $1/geo; |
| |
| s/\b(sha256\w+)\s+(q.*)/unsha256($1,$2)/geo; |
| |
| s/\bret\b/bx lr/go or |
| s/\bbx\s+lr\b/.word\t0xe12fff1e/go; # make it possible to compile with -march=armv4 |
| |
| print $_,"\n"; |
| } |
| |
| close STDOUT; # enforce flush |