| /* |
| * Suppport for CompuLab SBC-T3530 with CM-T3530 |
| */ |
| |
| #include "omap3-cm-t3530.dts" |
| #include "omap3-sb-t35.dtsi" |
| |
| / { |
| model = "CompuLab SBC-T3530 with CM-T3530"; |
| compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; |
| |
| aliases { |
| display0 = &dvi0; |
| display1 = &tv0; |
| }; |
| }; |
| |
| &omap3_pmx_core { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sb_t35_usb_hub_pins>; |
| |
| sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */ |
| >; |
| }; |
| }; |
| |
| &gpmc { |
| ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */ |
| <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */ |
| <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */ |
| }; |
| |
| &mmc1 { |
| cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &dss { |
| port { |
| dpi_out: endpoint { |
| remote-endpoint = <&tfp410_in>; |
| data-lines = <24>; |
| }; |
| }; |
| }; |
| |
