| /* |
| * Copyright Altera Corporation (C) 2015. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| compatible = "altr,socfpga-stratix10"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| reg = <0x0>; |
| }; |
| |
| cpu1: cpu@1 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| reg = <0x1>; |
| }; |
| |
| cpu2: cpu@2 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| reg = <0x2>; |
| }; |
| |
| cpu3: cpu@3 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| reg = <0x3>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <0 120 8>, |
| <0 121 8>, |
| <0 122 8>, |
| <0 123 8>; |
| interrupt-affinity = <&cpu0>, |
| <&cpu1>, |
| <&cpu2>, |
| <&cpu3>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| intc: intc@fffc1000 { |
| compatible = "arm,gic-400", "arm,cortex-a15-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x0 0xfffc1000 0x1000>, |
| <0x0 0xfffc2000 0x2000>, |
| <0x0 0xfffc4000 0x2000>, |
| <0x0 0xfffc6000 0x2000>; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| device_type = "soc"; |
| interrupt-parent = <&intc>; |
| ranges = <0 0 0 0xffffffff>; |
| |
| clkmgr@ffd1000 { |
| compatible = "altr,clk-mgr"; |
| reg = <0xffd10000 0x1000>; |
| }; |
| |
| gmac0: ethernet@ff800000 { |
| compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; |
| reg = <0xff800000 0x2000>; |
| interrupts = <0 90 4>; |
| interrupt-names = "macirq"; |
| mac-address = [00 00 00 00 00 00]; |
| status = "disabled"; |
| }; |
| |
| gmac1: ethernet@ff802000 { |
| compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; |
| reg = <0xff802000 0x2000>; |
| interrupts = <0 91 4>; |
| interrupt-names = "macirq"; |
| mac-address = [00 00 00 00 00 00]; |
| status = "disabled"; |
| }; |
| |
| gmac2: ethernet@ff804000 { |
| compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; |
| reg = <0xff804000 0x2000>; |
| interrupts = <0 92 4>; |
| interrupt-names = "macirq"; |
| mac-address = [00 00 00 00 00 00]; |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio@ffc03200 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xffc03200 0x100>; |
| status = "disabled"; |
| |
| porta: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| snps,nr-gpios = <24>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <0 110 4>; |
| }; |
| }; |
| |
| gpio1: gpio@ffc03300 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xffc03300 0x100>; |
| status = "disabled"; |
| |
| portb: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| snps,nr-gpios = <24>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <0 110 4>; |
| }; |
| }; |
| |
| i2c0: i2c@ffc02800 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc02800 0x100>; |
| interrupts = <0 103 4>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@ffc02900 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc02900 0x100>; |
| interrupts = <0 104 4>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@ffc02a00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc02a00 0x100>; |
| interrupts = <0 105 4>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@ffc02b00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc02b00 0x100>; |
| interrupts = <0 106 4>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@ffc02c00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc02c00 0x100>; |
| interrupts = <0 107 4>; |
| status = "disabled"; |
| }; |
| |
| mmc: dwmmc0@ff808000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "altr,socfpga-dw-mshc"; |
| reg = <0xff808000 0x1000>; |
| interrupts = <0 96 4>; |
| fifo-depth = <0x400>; |
| status = "disabled"; |
| }; |
| |
| ocram: sram@ffe00000 { |
| compatible = "mmio-sram"; |
| reg = <0xffe00000 0x100000>; |
| }; |
| |
| rst: rstmgr@ffd11000 { |
| #reset-cells = <1>; |
| compatible = "altr,rst-mgr"; |
| reg = <0xffd11000 0x1000>; |
| }; |
| |
| spi0: spi@ffda4000 { |
| compatible = "snps,dw-apb-ssi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xffda4000 0x1000>; |
| interrupts = <0 101 4>; |
| num-chipselect = <4>; |
| bus-num = <0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@ffda5000 { |
| compatible = "snps,dw-apb-ssi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xffda5000 0x1000>; |
| interrupts = <0 102 4>; |
| num-chipselect = <4>; |
| bus-num = <0>; |
| status = "disabled"; |
| }; |
| |
| sysmgr: sysmgr@ffd12000 { |
| compatible = "altr,sys-mgr", "syscon"; |
| reg = <0xffd12000 0x1000>; |
| }; |
| |
| /* Local timer */ |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <1 13 0xf01>, |
| <1 14 0xf01>, |
| <1 11 0xf01>, |
| <1 10 0xf01>; |
| }; |
| |
| timer0: timer0@ffc03000 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 113 4>; |
| reg = <0xffc03000 0x100>; |
| }; |
| |
| timer1: timer1@ffc03100 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 114 4>; |
| reg = <0xffc03100 0x100>; |
| }; |
| |
| timer2: timer2@ffd00000 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 115 4>; |
| reg = <0xffd00000 0x100>; |
| }; |
| |
| timer3: timer3@ffd00100 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 116 4>; |
| reg = <0xffd00100 0x100>; |
| }; |
| |
| uart0: serial0@ffc02000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0xffc02000 0x100>; |
| interrupts = <0 108 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial1@ffc02100 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0xffc02100 0x100>; |
| interrupts = <0 109 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| usbphy0: usbphy@0 { |
| #phy-cells = <0>; |
| compatible = "usb-nop-xceiv"; |
| status = "okay"; |
| }; |
| |
| usb0: usb@ffb00000 { |
| compatible = "snps,dwc2"; |
| reg = <0xffb00000 0x40000>; |
| interrupts = <0 93 4>; |
| phys = <&usbphy0>; |
| phy-names = "usb2-phy"; |
| status = "disabled"; |
| }; |
| |
| usb1: usb@ffb40000 { |
| compatible = "snps,dwc2"; |
| reg = <0xffb40000 0x40000>; |
| interrupts = <0 94 4>; |
| phys = <&usbphy0>; |
| phy-names = "usb2-phy"; |
| status = "disabled"; |
| }; |
| |
| watchdog0: watchdog@ffd00200 { |
| compatible = "snps,dw-wdt"; |
| reg = <0xffd00200 0x100>; |
| interrupts = <0 117 4>; |
| status = "disabled"; |
| }; |
| |
| watchdog1: watchdog@ffd00300 { |
| compatible = "snps,dw-wdt"; |
| reg = <0xffd00300 0x100>; |
| interrupts = <0 118 4>; |
| status = "disabled"; |
| }; |
| |
| watchdog2: watchdog@ffd00400 { |
| compatible = "snps,dw-wdt"; |
| reg = <0xffd00400 0x100>; |
| interrupts = <0 125 4>; |
| status = "disabled"; |
| }; |
| |
| watchdog3: watchdog@ffd00500 { |
| compatible = "snps,dw-wdt"; |
| reg = <0xffd00500 0x100>; |
| interrupts = <0 126 4>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
