| dnl aclocal.m4 generated automatically by aclocal 1.4-p6 |
| |
| dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. |
| dnl This file is free software; the Free Software Foundation |
| dnl gives unlimited permission to copy and/or distribute it, |
| dnl with or without modifications, as long as this notice is preserved. |
| |
| dnl This program is distributed in the hope that it will be useful, |
| dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| dnl PARTICULAR PURPOSE. |
| |
| dnl FTGL_PROG_CXX() |
| dnl Check the build plataform and try to use the native compiler |
| dnl |
| AC_DEFUN(FTGL_PROG_CXX, |
| [dnl |
| AC_CANONICAL_BUILD |
| AC_CANONICAL_HOST |
| |
| dnl I really don't know how to handle the cross-compiling case |
| if test "$build" = "$host" ; then |
| case "$build" in |
| *-*-irix*) |
| if test -z "$CXX" ; then |
| CXX=CC |
| fi |
| if test -z "$CC" ; then |
| CC=cc |
| fi |
| if test x$CXX = xCC -a -z "$CXXFLAGS" ; then |
| # It might be worthwhile to move this out of here, say |
| # EXTRA_CXXFLAGS. Forcing -n32 might cause trouble, too. |
| CXXFLAGS="-LANG:std -n32 -woff 1201 -O3" |
| fi |
| ;; |
| esac |
| fi |
| |
| AC_PROG_CXX |
| ]) |
| # Configure paths for FreeType2 |
| # Marcelo Magallon 2001-10-26, based on gtk.m4 by Owen Taylor |
| |
| dnl AC_CHECK_FT2([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) |
| dnl Test for FreeType2, and define FT2_CFLAGS and FT2_LIBS |
| dnl |
| AC_DEFUN(AC_CHECK_FT2, |
| [dnl |
| dnl Get the cflags and libraries from the freetype-config script |
| dnl |
| AC_ARG_WITH(freetype-prefix, |
| [ --with-ft-prefix=PFX Prefix where FreeType is installed (optional)], |
| ft_config_prefix="$withval", ft_config_prefix="") |
| AC_ARG_WITH(freetype-exec-prefix, |
| [ --with-ft-exec-prefix=PFX Exec prefix where FreeType is installed (optional)], |
| ft_config_exec_prefix="$withval", ft_config_exec_prefix="") |
| AC_ARG_ENABLE(freetypetest, [ --disable-freetypetest Do not try to compile and run a test FreeType program],[], |
| enable_fttest=yes) |
| |
| if test x$ft_config_exec_prefix != x ; then |
| ft_config_args="$ft_config_args --exec-prefix=$ft_config_exec_prefix" |
| if test x${FT2_CONFIG+set} != xset ; then |
| FT2_CONFIG=$ft_config_exec_prefix/bin/freetype-config |
| fi |
| fi |
| if test x$ft_config_prefix != x ; then |
| ft_config_args="$ft_config_args --prefix=$ft_config_prefix" |
| if test x${FT2_CONFIG+set} != xset ; then |
| FT2_CONFIG=$ft_config_prefix/bin/freetype-config |
| fi |
| fi |
| AC_PATH_PROG(FT2_CONFIG, freetype-config, no) |
| |
| min_ft_version=ifelse([$1], ,6.1.0,$1) |
| AC_MSG_CHECKING(for FreeType - version >= $min_ft_version) |
| no_ft="" |
| if test "$FT2_CONFIG" = "no" ; then |
| no_ft=yes |
| else |
| FT2_CFLAGS=`$FT2_CONFIG $ft_config_args --cflags` |
| FT2_LIBS=`$FT2_CONFIG $ft_config_args --libs` |
| ft_config_version=`$FT2_CONFIG $ft_config_args --version` |
| ft_config_major_version=`echo $ft_config_version | cut -d . -f 1` |
| ft_config_minor_version=`echo $ft_config_version | cut -d . -f 2` |
| ft_config_micro_version=`echo $ft_config_version | cut -d . -f 3` |
| ft_min_major_version=`echo $min_ft_version | cut -d . -f 1` |
| ft_min_minor_version=`echo $min_ft_version | cut -d . -f 2` |
| ft_min_micro_version=`echo $min_ft_version | cut -d . -f 3` |
| if test "x$enable_fttest" = "xyes" ; then |
| ft_config_version=`expr $ft_config_major_version \* 10000 + $ft_config_minor_version \* 100 + $ft_config_micro_version` |
| ft_min_version=`expr $ft_min_major_version \* 10000 + $ft_min_minor_version \* 100 + $ft_min_micro_version` |
| if test $ft_config_version -lt $ft_min_version ; then |
| ifelse([$3], , :, [$3]) |
| else |
| ac_save_CFLAGS="$CFLAGS" |
| ac_save_LIBS="$LIBS" |
| CFLAGS="$CFLAGS $FT2_CFLAGS" |
| LIBS="$FT2_LIBS $LIBS" |
| dnl |
| dnl Sanity checks the results of freetype-config to some extent |
| dnl |
| AC_TRY_RUN([ |
| #include <ft2build.h> |
| #include FT_FREETYPE_H |
| #include <stdio.h> |
| #include <stdlib.h> |
| |
| int |
| main () |
| { |
| FT_Library library; |
| FT_Error error; |
| |
| error = FT_Init_FreeType( &library ); |
| |
| if ( error ) |
| { |
| return 1; |
| } else { |
| FT_Done_FreeType( library ); |
| return 0; |
| } |
| } |
| ],, no_ft=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) |
| CFLAGS="$ac_save_CFLAGS" |
| LIBS="$ac_save_LIBS" |
| fi # test $ft_config_version -lt $ft_min_version |
| fi # test "x$enable_fttest" = "xyes" |
| fi # test "$FT2_CONFIG" = "no" |
| if test "x$no_ft" = x ; then |
| AC_MSG_RESULT(yes) |
| ifelse([$2], , :, [$2]) |
| else |
| AC_MSG_RESULT(no) |
| if test "$FT2_CONFIG" = "no" ; then |
| echo "*** The freetype-config script installed by FT2 could not be found" |
| echo "*** If FT2 was installed in PREFIX, make sure PREFIX/bin is in" |
| echo "*** your path, or set the FT2_CONFIG environment variable to the" |
| echo "*** full path to freetype-config." |
| else |
| echo "*** The FreeType test program failed to run. If your system uses" |
| echo "*** shared libraries and they are installed outside the normal" |
| echo "*** system library path, make sure the variable LD_LIBRARY_PATH" |
| echo "*** (or whatever is appropiate for your system) is correctly set." |
| fi |
| FT2_CFLAGS="" |
| FT2_LIBS="" |
| ifelse([$3], , :, [$3]) |
| fi |
| AC_SUBST(FT2_CFLAGS) |
| AC_SUBST(FT2_LIBS) |
| ]) |
| dnl FTGL_CHECK_GL() |
| dnl Check for OpenGL development environment and GLU >= 1.2 |
| dnl |
| AC_DEFUN([FTGL_CHECK_GL], |
| [dnl |
| AC_REQUIRE([AC_PROG_CC]) |
| AC_REQUIRE([AC_PATH_X]) |
| AC_REQUIRE([AC_PATH_XTRA]) |
| |
| AC_ARG_WITH([--with-gl-inc], |
| AC_HELP_STRING([--with-gl-inc=DIR],[Directory where GL/gl.h is installed])) |
| AC_ARG_WITH([--with-gl-lib], |
| AC_HELP_STRING([--with-gl-lib=DIR],[Directory where OpenGL libraries are installed])) |
| |
| AC_LANG_SAVE |
| AC_LANG_C |
| |
| GL_SAVE_CPPFLAGS="$CPPFLAGS" |
| GL_SAVE_LIBS="$LIBS" |
| |
| if test "x$no_x" != xyes ; then |
| GL_CFLAGS="$X_CFLAGS" |
| GL_X_LIBS="$X_PRE_LIBS $X_LIBS -lX11 -lXext -lXmu $X_EXTRA_LIBS" |
| fi |
| |
| if test "x$with_gl_inc" != "xnone" ; then |
| if test -d "$with_gl_inc" ; then |
| GL_CFLAGS="-I$with_gl_inc" |
| else |
| GL_CFLAGS="$with_gl_inc" |
| fi |
| else |
| GL_CFLAGS= |
| fi |
| |
| CPPFLAGS="$GL_CFLAGS" |
| AC_CHECK_HEADER([GL/gl.h], [], [AC_MSG_ERROR(GL/gl.h is needed, please specify its location with --with-gl-inc. If this still fails, please contact mmagallo@debian.org, include the string FTGL somewhere in the subject line and provide a copy of the config.log file that was left behind.)]) |
| |
| AC_MSG_CHECKING([for GL library]) |
| if test "x$with_gl_lib" != "x" ; then |
| if test -d "$with_gl_lib" ; then |
| LIBS="-L$with_gl_lib -lGL" |
| else |
| LIBS="$with_gl_lib" |
| fi |
| else |
| LIBS="-lGL" |
| fi |
| AC_LINK_IFELSE([AC_LANG_CALL([],[glBegin])],[HAVE_GL=yes], [HAVE_GL=no]) |
| if test "x$HAVE_GL" = xno ; then |
| if test "x$GL_X_LIBS" != x ; then |
| LIBS="-lGL $GL_X_LIBS" |
| AC_LINK_IFELSE([AC_LANG_CALL([],[glBegin])],[HAVE_GL=yes], [HAVE_GL=no]) |
| fi |
| fi |
| if test "x$HAVE_GL" = xyes ; then |
| AC_MSG_RESULT([yes]) |
| GL_LIBS=$LIBS |
| else |
| AC_MSG_RESULT([no]) |
| AC_MSG_ERROR([GL library could not be found, please specify its location with --with-gl-lib. If this still fails, please contact mmagallo@debian.org, include the string FTGL somewhere in the subject line and provide a copy of the config.log file that was left behind.]) |
| fi |
| |
| AC_CHECK_HEADER([GL/glu.h]) |
| AC_MSG_CHECKING([for GLU version >= 1.2]) |
| AC_TRY_COMPILE([#include <GL/glu.h>], [ |
| #if !defined(GLU_VERSION_1_2) |
| #error GLU too old |
| #endif |
| ], |
| [AC_MSG_RESULT([yes])], |
| [AC_MSG_RESULT([no]) |
| AC_MSG_ERROR([GLU >= 1.2 is needed to compile this library]) |
| ]) |
| |
| AC_MSG_CHECKING([for GLU library]) |
| LIBS="-lGLU $GL_LIBS" |
| AC_LINK_IFELSE([AC_LANG_CALL([],[gluNewTess])],[HAVE_GLU=yes], [HAVE_GLU=no]) |
| if test "x$HAVE_GLU" = xno ; then |
| if test "x$GL_X_LIBS" != x ; then |
| LIBS="-lGLU $GL_LIBS $GL_X_LIBS" |
| AC_LINK_IFELSE([AC_LANG_CALL([],[gluNewTess])],[HAVE_GLU=yes], [HAVE_GLU=no]) |
| fi |
| fi |
| if test "x$HAVE_GLU" = xyes ; then |
| AC_MSG_RESULT([yes]) |
| GL_LIBS="$LIBS" |
| else |
| AC_MSG_RESULT([no]) |
| AC_MSG_ERROR([GLU library could not be found, please specify its location with --with-gl-lib. If this still fails, please contact mmagallo@debian.org, include the string FTGL somewhere in the subject line and provide a copy of the config.log file that was left behind.]) |
| fi |
| |
| AC_SUBST(GL_CFLAGS) |
| AC_SUBST(GL_LIBS) |
| |
| CPPFLAGS="$GL_SAVE_CPPFLAGS" |
| LIBS="$GL_SAVE_LIBS" |
| AC_LANG_RESTORE |
| GL_X_LIBS="" |
| ]) |
| dnl FTGL_CHECK_GLUT() |
| dnl Check for GLUT development environment |
| dnl |
| AC_DEFUN([FTGL_CHECK_GLUT], |
| [dnl |
| AC_REQUIRE([AC_PROG_CC])dnl |
| AC_REQUIRE([AC_PATH_X])dnl |
| AC_REQUIRE([AC_PATH_XTRA])dnl |
| AC_REQUIRE([FTGL_CHECK_GL])dnl |
| |
| AC_ARG_WITH([--with-glut-inc], |
| AC_HELP_STRING([--with-glut-inc=DIR],[Directory where GL/glut.h is installed (optional)])) |
| AC_ARG_WITH([--with-glut-lib], |
| AC_HELP_STRING([--with-glut-lib=DIR],[Directory where GLUT libraries are installed (optional)])) |
| |
| AC_LANG_SAVE |
| AC_LANG_C |
| |
| GLUT_SAVE_CPPFLAGS="$CPPFLAGS" |
| GLUT_SAVE_LIBS="$LIBS" |
| |
| if test "x$no_x" != xyes ; then |
| GLUT_CFLAGS="$X_CFLAGS" |
| GLUT_X_LIBS="$X_PRE_LIBS $X_LIBS -lX11 -lXext -lXmu $X_EXTRA_LIBS" |
| fi |
| |
| if test "x$with_glut_inc" != "xnone" ; then |
| if test -d "$with_glut_inc" ; then |
| GLUT_CFLAGS="-I$with_glut_inc" |
| else |
| GLUT_CFLAGS="$with_glut_inc" |
| fi |
| else |
| GLUT_CFLAGS= |
| fi |
| |
| CPPFLAGS="$GLUT_CFLAGS" |
| AC_CHECK_HEADER([GL/glut.h], [HAVE_GLUT=yes], [HAVE_GLUT=no]) |
| |
| if test "x$HAVE_GLUT" = xno ; then |
| AC_MSG_WARN([GLUT headers not availabe, example program won't be compiled.]) |
| else |
| |
| # Check for GLUT libraries |
| |
| AC_MSG_CHECKING([for GLUT library]) |
| if test "x$with_glut_lib" != "x" ; then |
| if test -d "$with_glut_lib" ; then |
| LIBS="-L$with_glut_lib -lglut" |
| else |
| LIBS="$with_glut_lib" |
| fi |
| else |
| LIBS="-lglut" |
| fi |
| AC_LINK_IFELSE( |
| [AC_LANG_CALL([],[glutInit])], |
| [HAVE_GLUT=yes], |
| [HAVE_GLUT=no]) |
| |
| if test "x$HAVE_GLUT" = xno ; then |
| # Try again with the GL libs |
| LIBS="-lglut $GL_LIBS" |
| AC_LINK_IFELSE( |
| [AC_LANG_CALL([],[glutInit])], |
| [HAVE_GLUT=yes], |
| [HAVE_GLUT=no]) |
| fi |
| |
| if test "x$HAVE_GLUT" = xno && test "x$GLUT_X_LIBS" != x ; then |
| # Try again with the GL and X11 libs |
| LIBS="-lglut $GL_LIBS $GLUT_X_LIBS" |
| AC_LINK_IFELSE( |
| [AC_LANG_CALL([],[glutInit])], |
| [HAVE_GLUT=yes], |
| [HAVE_GLUT=no]) |
| fi |
| |
| if test "x$HAVE_GLUT" = xyes ; then |
| AC_MSG_RESULT([yes]) |
| GLUT_LIBS=$LIBS |
| else |
| AC_MSG_RESULT([no]) |
| AC_MSG_WARN([GLUT libraries not availabe, example program won't be compiled.]) |
| fi |
| |
| # End check for GLUT libraries |
| |
| fi |
| |
| AC_SUBST(HAVE_GLUT) |
| AC_SUBST(GLUT_CFLAGS) |
| AC_SUBST(GLUT_LIBS) |
| AC_LANG_RESTORE |
| |
| CPPFLAGS="$GLUT_SAVE_CPPFLAGS" |
| LIBS="$GLUT_SAVE_LIBS" |
| GLUT_X_CFLAGS= |
| GLUT_X_LIBS= |
| ]) |
| |
| # libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- |
| |
| # serial 46 AC_PROG_LIBTOOL |
| |
| AC_DEFUN([AC_PROG_LIBTOOL], |
| [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl |
| |
| # This can be used to rebuild libtool when needed |
| LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" |
| |
| # Always use our own libtool. |
| LIBTOOL='$(SHELL) $(top_builddir)/libtool' |
| AC_SUBST(LIBTOOL)dnl |
| |
| # Prevent multiple expansion |
| define([AC_PROG_LIBTOOL], []) |
| ]) |
| |
| AC_DEFUN([AC_LIBTOOL_SETUP], |
| [AC_PREREQ(2.13)dnl |
| AC_REQUIRE([AC_ENABLE_SHARED])dnl |
| AC_REQUIRE([AC_ENABLE_STATIC])dnl |
| AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl |
| AC_REQUIRE([AC_CANONICAL_HOST])dnl |
| AC_REQUIRE([AC_CANONICAL_BUILD])dnl |
| AC_REQUIRE([AC_PROG_CC])dnl |
| AC_REQUIRE([AC_PROG_LD])dnl |
| AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl |
| AC_REQUIRE([AC_PROG_NM])dnl |
| AC_REQUIRE([LT_AC_PROG_SED])dnl |
| |
| AC_REQUIRE([AC_PROG_LN_S])dnl |
| AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl |
| AC_REQUIRE([AC_OBJEXT])dnl |
| AC_REQUIRE([AC_EXEEXT])dnl |
| dnl |
| |
| _LT_AC_PROG_ECHO_BACKSLASH |
| # Only perform the check for file, if the check method requires it |
| case $deplibs_check_method in |
| file_magic*) |
| if test "$file_magic_cmd" = '$MAGIC_CMD'; then |
| AC_PATH_MAGIC |
| fi |
| ;; |
| esac |
| |
| AC_CHECK_TOOL(RANLIB, ranlib, :) |
| AC_CHECK_TOOL(STRIP, strip, :) |
| |
| ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) |
| ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], |
| enable_win32_dll=yes, enable_win32_dll=no) |
| |
| AC_ARG_ENABLE(libtool-lock, |
| [ --disable-libtool-lock avoid locking (might break parallel builds)]) |
| test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes |
| |
| # Some flags need to be propagated to the compiler or linker for good |
| # libtool support. |
| case $host in |
| *-*-irix6*) |
| # Find out which ABI we are using. |
| echo '[#]line __oline__ "configure"' > conftest.$ac_ext |
| if AC_TRY_EVAL(ac_compile); then |
| case `/usr/bin/file conftest.$ac_objext` in |
| *32-bit*) |
| LD="${LD-ld} -32" |
| ;; |
| *N32*) |
| LD="${LD-ld} -n32" |
| ;; |
| *64-bit*) |
| LD="${LD-ld} -64" |
| ;; |
| esac |
| fi |
| rm -rf conftest* |
| ;; |
| |
| *-*-sco3.2v5*) |
| # On SCO OpenServer 5, we need -belf to get full-featured binaries. |
| SAVE_CFLAGS="$CFLAGS" |
| CFLAGS="$CFLAGS -belf" |
| AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, |
| [AC_LANG_SAVE |
| AC_LANG_C |
| AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) |
| AC_LANG_RESTORE]) |
| if test x"$lt_cv_cc_needs_belf" != x"yes"; then |
| # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf |
| CFLAGS="$SAVE_CFLAGS" |
| fi |
| ;; |
| |
| ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], |
| [*-*-cygwin* | *-*-mingw* | *-*-pw32*) |
| AC_CHECK_TOOL(DLLTOOL, dlltool, false) |
| AC_CHECK_TOOL(AS, as, false) |
| AC_CHECK_TOOL(OBJDUMP, objdump, false) |
| |
| # recent cygwin and mingw systems supply a stub DllMain which the user |
| # can override, but on older systems we have to supply one |
| AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, |
| [AC_TRY_LINK([], |
| [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); |
| DllMain (0, 0, 0);], |
| [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) |
| |
| case $host/$CC in |
| *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) |
| # old mingw systems require "-dll" to link a DLL, while more recent ones |
| # require "-mdll" |
| SAVE_CFLAGS="$CFLAGS" |
| CFLAGS="$CFLAGS -mdll" |
| AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, |
| [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) |
| CFLAGS="$SAVE_CFLAGS" ;; |
| *-*-cygwin* | *-*-pw32*) |
| # cygwin systems need to pass --dll to the linker, and not link |
| # crt.o which will require a WinMain@16 definition. |
| lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; |
| esac |
| ;; |
| ]) |
| esac |
| |
| _LT_AC_LTCONFIG_HACK |
| |
| ]) |
| |
| # AC_LIBTOOL_HEADER_ASSERT |
| # ------------------------ |
| AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT], |
| [AC_CACHE_CHECK([whether $CC supports assert without backlinking], |
| [lt_cv_func_assert_works], |
| [case $host in |
| *-*-solaris*) |
| if test "$GCC" = yes && test "$with_gnu_ld" != yes; then |
| case `$CC --version 2>/dev/null` in |
| [[12]].*) lt_cv_func_assert_works=no ;; |
| *) lt_cv_func_assert_works=yes ;; |
| esac |
| fi |
| ;; |
| esac]) |
| |
| if test "x$lt_cv_func_assert_works" = xyes; then |
| AC_CHECK_HEADERS(assert.h) |
| fi |
| ])# AC_LIBTOOL_HEADER_ASSERT |
| |
| # _LT_AC_CHECK_DLFCN |
| # -------------------- |
| AC_DEFUN([_LT_AC_CHECK_DLFCN], |
| [AC_CHECK_HEADERS(dlfcn.h) |
| ])# _LT_AC_CHECK_DLFCN |
| |
| # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE |
| # --------------------------------- |
| AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], |
| [AC_REQUIRE([AC_CANONICAL_HOST]) |
| AC_REQUIRE([AC_PROG_NM]) |
| AC_REQUIRE([AC_OBJEXT]) |
| # Check for command to grab the raw symbol name followed by C symbol from nm. |
| AC_MSG_CHECKING([command to parse $NM output]) |
| AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl |
| |
| # These are sane defaults that work on at least a few old systems. |
| # [They come from Ultrix. What could be older than Ultrix?!! ;)] |
| |
| # Character class describing NM global symbol codes. |
| symcode='[[BCDEGRST]]' |
| |
| # Regexp to match symbols that can be accessed directly from C. |
| sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' |
| |
| # Transform the above into a raw symbol and a C symbol. |
| symxfrm='\1 \2\3 \3' |
| |
| # Transform an extracted symbol line into a proper C declaration |
| lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" |
| |
| # Transform an extracted symbol line into symbol name and symbol address |
| lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" |
| |
| # Define system-specific variables. |
| case $host_os in |
| aix*) |
| symcode='[[BCDT]]' |
| ;; |
| cygwin* | mingw* | pw32*) |
| symcode='[[ABCDGISTW]]' |
| ;; |
| hpux*) # Its linker distinguishes data from code symbols |
| lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" |
| lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" |
| ;; |
| irix* | nonstopux*) |
| symcode='[[BCDEGRST]]' |
| ;; |
| osf*) |
| symcode='[[BCDEGQRST]]' |
| ;; |
| solaris* | sysv5*) |
| symcode='[[BDT]]' |
| ;; |
| sysv4) |
| symcode='[[DFNSTU]]' |
| ;; |
| esac |
| |
| # Handle CRLF in mingw tool chain |
| opt_cr= |
| case $host_os in |
| mingw*) |
| opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp |
| ;; |
| esac |
| |
| # If we're using GNU nm, then use its standard symbol codes. |
| if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then |
| symcode='[[ABCDGISTW]]' |
| fi |
| |
| # Try without a prefix undercore, then with it. |
| for ac_symprfx in "" "_"; do |
| |
| # Write the raw and C identifiers. |
| lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" |
| |
| # Check to see that the pipe works correctly. |
| pipe_works=no |
| rm -f conftest* |
| cat > conftest.$ac_ext <<EOF |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| char nm_test_var; |
| void nm_test_func(){} |
| #ifdef __cplusplus |
| } |
| #endif |
| int main(){nm_test_var='a';nm_test_func();return(0);} |
| EOF |
| |
| if AC_TRY_EVAL(ac_compile); then |
| # Now try to grab the symbols. |
| nlist=conftest.nm |
| if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then |
| # Try sorting and uniquifying the output. |
| if sort "$nlist" | uniq > "$nlist"T; then |
| mv -f "$nlist"T "$nlist" |
| else |
| rm -f "$nlist"T |
| fi |
| |
| # Make sure that we snagged all the symbols we need. |
| if egrep ' nm_test_var$' "$nlist" >/dev/null; then |
| if egrep ' nm_test_func$' "$nlist" >/dev/null; then |
| cat <<EOF > conftest.$ac_ext |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| EOF |
| # Now generate the symbol file. |
| eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' |
| |
| cat <<EOF >> conftest.$ac_ext |
| #if defined (__STDC__) && __STDC__ |
| # define lt_ptr void * |
| #else |
| # define lt_ptr char * |
| # define const |
| #endif |
| |
| /* The mapping between symbol names and symbols. */ |
| const struct { |
| const char *name; |
| lt_ptr address; |
| } |
| lt_preloaded_symbols[[]] = |
| { |
| EOF |
| sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext |
| cat <<\EOF >> conftest.$ac_ext |
| {0, (lt_ptr) 0} |
| }; |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| EOF |
| # Now try linking the two files. |
| mv conftest.$ac_objext conftstm.$ac_objext |
| save_LIBS="$LIBS" |
| save_CFLAGS="$CFLAGS" |
| LIBS="conftstm.$ac_objext" |
| CFLAGS="$CFLAGS$no_builtin_flag" |
| if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then |
| pipe_works=yes |
| fi |
| LIBS="$save_LIBS" |
| CFLAGS="$save_CFLAGS" |
| else |
| echo "cannot find nm_test_func in $nlist" >&AC_FD_CC |
| fi |
| else |
| echo "cannot find nm_test_var in $nlist" >&AC_FD_CC |
| fi |
| else |
| echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC |
| fi |
| else |
| echo "$progname: failed program was:" >&AC_FD_CC |
| cat conftest.$ac_ext >&5 |
| fi |
| rm -f conftest* conftst* |
| |
| # Do not use the global_symbol_pipe unless it works. |
| if test "$pipe_works" = yes; then |
| break |
| else |
| lt_cv_sys_global_symbol_pipe= |
| fi |
| done |
| ]) |
| global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" |
| if test -z "$lt_cv_sys_global_symbol_pipe"; then |
| global_symbol_to_cdecl= |
| global_symbol_to_c_name_address= |
| else |
| global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" |
| global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" |
| fi |
| if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; |
| then |
| AC_MSG_RESULT(failed) |
| else |
| AC_MSG_RESULT(ok) |
| fi |
| ]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE |
| |
| # _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR |
| # --------------------------------- |
| AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], |
| [# Find the correct PATH separator. Usually this is `:', but |
| # DJGPP uses `;' like DOS. |
| if test "X${PATH_SEPARATOR+set}" != Xset; then |
| UNAME=${UNAME-`uname 2>/dev/null`} |
| case X$UNAME in |
| *-DOS) lt_cv_sys_path_separator=';' ;; |
| *) lt_cv_sys_path_separator=':' ;; |
| esac |
| PATH_SEPARATOR=$lt_cv_sys_path_separator |
| fi |
| ])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR |
| |
| # _LT_AC_PROG_ECHO_BACKSLASH |
| # -------------------------- |
| # Add some code to the start of the generated configure script which |
| # will find an echo command which doesn't interpret backslashes. |
| AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], |
| [ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], |
| [AC_DIVERT_PUSH(NOTICE)]) |
| _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR |
| |
| # Check that we are running under the correct shell. |
| SHELL=${CONFIG_SHELL-/bin/sh} |
| |
| case X$ECHO in |
| X*--fallback-echo) |
| # Remove one level of quotation (which was required for Make). |
| ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` |
| ;; |
| esac |
| |
| echo=${ECHO-echo} |
| if test "X[$]1" = X--no-reexec; then |
| # Discard the --no-reexec flag, and continue. |
| shift |
| elif test "X[$]1" = X--fallback-echo; then |
| # Avoid inline document here, it may be left over |
| : |
| elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then |
| # Yippee, $echo works! |
| : |
| else |
| # Restart under the correct shell. |
| exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} |
| fi |
| |
| if test "X[$]1" = X--fallback-echo; then |
| # used as fallback echo |
| shift |
| cat <<EOF |
| $* |
| EOF |
| exit 0 |
| fi |
| |
| # The HP-UX ksh and POSIX shell print the target directory to stdout |
| # if CDPATH is set. |
| if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi |
| |
| if test -z "$ECHO"; then |
| if test "X${echo_test_string+set}" != Xset; then |
| # find a string as large as possible, as long as the shell can cope with it |
| for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do |
| # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... |
| if (echo_test_string="`eval $cmd`") 2>/dev/null && |
| echo_test_string="`eval $cmd`" && |
| (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null |
| then |
| break |
| fi |
| done |
| fi |
| |
| if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && |
| echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && |
| test "X$echo_testing_string" = "X$echo_test_string"; then |
| : |
| else |
| # The Solaris, AIX, and Digital Unix default echo programs unquote |
| # backslashes. This makes it impossible to quote backslashes using |
| # echo "$something" | sed 's/\\/\\\\/g' |
| # |
| # So, first we look for a working echo in the user's PATH. |
| |
| IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR |
| for dir in $PATH /usr/ucb; do |
| if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && |
| test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && |
| echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && |
| test "X$echo_testing_string" = "X$echo_test_string"; then |
| echo="$dir/echo" |
| break |
| fi |
| done |
| IFS="$save_ifs" |
| |
| if test "X$echo" = Xecho; then |
| # We didn't find a better echo, so look for alternatives. |
| if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && |
| echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && |
| test "X$echo_testing_string" = "X$echo_test_string"; then |
| # This shell has a builtin print -r that does the trick. |
| echo='print -r' |
| elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && |
| test "X$CONFIG_SHELL" != X/bin/ksh; then |
| # If we have ksh, try running configure again with it. |
| ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} |
| export ORIGINAL_CONFIG_SHELL |
| CONFIG_SHELL=/bin/ksh |
| export CONFIG_SHELL |
| exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} |
| else |
| # Try using printf. |
| echo='printf %s\n' |
| if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && |
| echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && |
| test "X$echo_testing_string" = "X$echo_test_string"; then |
| # Cool, printf works |
| : |
| elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && |
| test "X$echo_testing_string" = 'X\t' && |
| echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && |
| test "X$echo_testing_string" = "X$echo_test_string"; then |
| CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL |
| export CONFIG_SHELL |
| SHELL="$CONFIG_SHELL" |
| export SHELL |
| echo="$CONFIG_SHELL [$]0 --fallback-echo" |
| elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && |
| test "X$echo_testing_string" = 'X\t' && |
| echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && |
| test "X$echo_testing_string" = "X$echo_test_string"; then |
| echo="$CONFIG_SHELL [$]0 --fallback-echo" |
| else |
| # maybe with a smaller string... |
| prev=: |
| |
| for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do |
| if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null |
| then |
| break |
| fi |
| prev="$cmd" |
| done |
| |
| if test "$prev" != 'sed 50q "[$]0"'; then |
| echo_test_string=`eval $prev` |
| export echo_test_string |
| exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} |
| else |
| # Oops. We lost completely, so just stick with echo. |
| echo=echo |
| fi |
| fi |
| fi |
| fi |
| fi |
| fi |
| |
| # Copy echo and quote the copy suitably for passing to libtool from |
| # the Makefile, instead of quoting the original, which is used later. |
| ECHO=$echo |
| if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then |
| ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" |
| fi |
| |
| AC_SUBST(ECHO) |
| AC_DIVERT_POP |
| ])# _LT_AC_PROG_ECHO_BACKSLASH |
| |
| # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, |
| # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) |
| # ------------------------------------------------------------------ |
| AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], |
| [if test "$cross_compiling" = yes; then : |
| [$4] |
| else |
| AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl |
| lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 |
| lt_status=$lt_dlunknown |
| cat > conftest.$ac_ext <<EOF |
| [#line __oline__ "configure" |
| #include "confdefs.h" |
| |
| #if HAVE_DLFCN_H |
| #include <dlfcn.h> |
| #endif |
| |
| #include <stdio.h> |
| |
| #ifdef RTLD_GLOBAL |
| # define LT_DLGLOBAL RTLD_GLOBAL |
| #else |
| # ifdef DL_GLOBAL |
| # define LT_DLGLOBAL DL_GLOBAL |
| # else |
| # define LT_DLGLOBAL 0 |
| # endif |
| #endif |
| |
| /* We may have to define LT_DLLAZY_OR_NOW in the command line if we |
| find out it does not work in some platform. */ |
| #ifndef LT_DLLAZY_OR_NOW |
| # ifdef RTLD_LAZY |
| # define LT_DLLAZY_OR_NOW RTLD_LAZY |
| # else |
| # ifdef DL_LAZY |
| # define LT_DLLAZY_OR_NOW DL_LAZY |
| # else |
| # ifdef RTLD_NOW |
| # define LT_DLLAZY_OR_NOW RTLD_NOW |
| # else |
| # ifdef DL_NOW |
| # define LT_DLLAZY_OR_NOW DL_NOW |
| # else |
| # define LT_DLLAZY_OR_NOW 0 |
| # endif |
| # endif |
| # endif |
| # endif |
| #endif |
| |
| #ifdef __cplusplus |
| extern "C" void exit (int); |
| #endif |
| |
| void fnord() { int i=42;} |
| int main () |
| { |
| void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); |
| int status = $lt_dlunknown; |
| |
| if (self) |
| { |
| if (dlsym (self,"fnord")) status = $lt_dlno_uscore; |
| else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; |
| /* dlclose (self); */ |
| } |
| |
| exit (status); |
| }] |
| EOF |
| if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then |
| (./conftest; exit; ) 2>/dev/null |
| lt_status=$? |
| case x$lt_status in |
| x$lt_dlno_uscore) $1 ;; |
| x$lt_dlneed_uscore) $2 ;; |
| x$lt_unknown|x*) $3 ;; |
| esac |
| else : |
| # compilation failed |
| $3 |
| fi |
| fi |
| rm -fr conftest* |
| ])# _LT_AC_TRY_DLOPEN_SELF |
| |
| # AC_LIBTOOL_DLOPEN_SELF |
| # ------------------- |
| AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], |
| [if test "x$enable_dlopen" != xyes; then |
| enable_dlopen=unknown |
| enable_dlopen_self=unknown |
| enable_dlopen_self_static=unknown |
| else |
| lt_cv_dlopen=no |
| lt_cv_dlopen_libs= |
| |
| case $host_os in |
| beos*) |
| lt_cv_dlopen="load_add_on" |
| lt_cv_dlopen_libs= |
| lt_cv_dlopen_self=yes |
| ;; |
| |
| cygwin* | mingw* | pw32*) |
| lt_cv_dlopen="LoadLibrary" |
| lt_cv_dlopen_libs= |
| ;; |
| |
| *) |
| AC_CHECK_FUNC([shl_load], |
| [lt_cv_dlopen="shl_load"], |
| [AC_CHECK_LIB([dld], [shl_load], |
| [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], |
| [AC_CHECK_FUNC([dlopen], |
| [lt_cv_dlopen="dlopen"], |
| [AC_CHECK_LIB([dl], [dlopen], |
| [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], |
| [AC_CHECK_LIB([svld], [dlopen], |
| [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], |
| [AC_CHECK_LIB([dld], [dld_link], |
| [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) |
| ]) |
| ]) |
| ]) |
| ]) |
| ]) |
| ;; |
| esac |
| |
| if test "x$lt_cv_dlopen" != xno; then |
| enable_dlopen=yes |
| else |
| enable_dlopen=no |
| fi |
| |
| case $lt_cv_dlopen in |
| dlopen) |
| save_CPPFLAGS="$CPPFLAGS" |
| AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl |
| test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" |
| |
| save_LDFLAGS="$LDFLAGS" |
| eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" |
| |
| save_LIBS="$LIBS" |
| LIBS="$lt_cv_dlopen_libs $LIBS" |
| |
| AC_CACHE_CHECK([whether a program can dlopen itself], |
| lt_cv_dlopen_self, [dnl |
| _LT_AC_TRY_DLOPEN_SELF( |
| lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, |
| lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) |
| ]) |
| |
| if test "x$lt_cv_dlopen_self" = xyes; then |
| LDFLAGS="$LDFLAGS $link_static_flag" |
| AC_CACHE_CHECK([whether a statically linked program can dlopen itself], |
| lt_cv_dlopen_self_static, [dnl |
| _LT_AC_TRY_DLOPEN_SELF( |
| lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, |
| lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) |
| ]) |
| fi |
| |
| CPPFLAGS="$save_CPPFLAGS" |
| LDFLAGS="$save_LDFLAGS" |
| LIBS="$save_LIBS" |
| ;; |
| esac |
| |
| case $lt_cv_dlopen_self in |
| yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; |
| *) enable_dlopen_self=unknown ;; |
| esac |
| |
| case $lt_cv_dlopen_self_static in |
| yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; |
| *) enable_dlopen_self_static=unknown ;; |
| esac |
| fi |
| ])# AC_LIBTOOL_DLOPEN_SELF |
| |
| AC_DEFUN([_LT_AC_LTCONFIG_HACK], |
| [AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl |
| # Sed substitution that helps us do robust quoting. It backslashifies |
| # metacharacters that are still active within double-quoted strings. |
| Xsed='sed -e s/^X//' |
| sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g' |
| |
| # Same as above, but do not quote variable references. |
| double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g' |
| |
| # Sed substitution to delay expansion of an escaped shell variable in a |
| # double_quote_subst'ed string. |
| delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' |
| |
| # Constants: |
| rm="rm -f" |
| |
| # Global variables: |
| default_ofile=libtool |
| can_build_shared=yes |
| |
| # All known linkers require a `.a' archive for static linking (except M$VC, |
| # which needs '.lib'). |
| libext=a |
| ltmain="$ac_aux_dir/ltmain.sh" |
| ofile="$default_ofile" |
| with_gnu_ld="$lt_cv_prog_gnu_ld" |
| need_locks="$enable_libtool_lock" |
| |
| old_CC="$CC" |
| old_CFLAGS="$CFLAGS" |
| |
| # Set sane defaults for various variables |
| test -z "$AR" && AR=ar |
| test -z "$AR_FLAGS" && AR_FLAGS=cru |
| test -z "$AS" && AS=as |
| test -z "$CC" && CC=cc |
| test -z "$DLLTOOL" && DLLTOOL=dlltool |
| test -z "$LD" && LD=ld |
| test -z "$LN_S" && LN_S="ln -s" |
| test -z "$MAGIC_CMD" && MAGIC_CMD=file |
| test -z "$NM" && NM=nm |
| test -z "$OBJDUMP" && OBJDUMP=objdump |
| test -z "$RANLIB" && RANLIB=: |
| test -z "$STRIP" && STRIP=: |
| test -z "$ac_objext" && ac_objext=o |
| |
| if test x"$host" != x"$build"; then |
| ac_tool_prefix=${host_alias}- |
| else |
| ac_tool_prefix= |
| fi |
| |
| # Transform linux* to *-*-linux-gnu*, to support old configure scripts. |
| case $host_os in |
| linux-gnu*) ;; |
| linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` |
| esac |
| |
| case $host_os in |
| aix3*) |
| # AIX sometimes has problems with the GCC collect2 program. For some |
| # reason, if we set the COLLECT_NAMES environment variable, the problems |
| # vanish in a puff of smoke. |
| if test "X${COLLECT_NAMES+set}" != Xset; then |
| COLLECT_NAMES= |
| export COLLECT_NAMES |
| fi |
| ;; |
| esac |
| |
| # Determine commands to create old-style static archives. |
| old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' |
| old_postinstall_cmds='chmod 644 $oldlib' |
| old_postuninstall_cmds= |
| |
| if test -n "$RANLIB"; then |
| case $host_os in |
| openbsd*) |
| old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" |
| ;; |
| *) |
| old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" |
| ;; |
| esac |
| old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" |
| fi |
| |
| # Allow CC to be a program name with arguments. |
| set dummy $CC |
| compiler="[$]2" |
| |
| AC_MSG_CHECKING([for objdir]) |
| rm -f .libs 2>/dev/null |
| mkdir .libs 2>/dev/null |
| if test -d .libs; then |
| objdir=.libs |
| else |
| # MS-DOS does not allow filenames that begin with a dot. |
| objdir=_libs |
| fi |
| rmdir .libs 2>/dev/null |
| AC_MSG_RESULT($objdir) |
| |
| |
| AC_ARG_WITH(pic, |
| [ --with-pic try to use only PIC/non-PIC objects [default=use both]], |
| pic_mode="$withval", pic_mode=default) |
| test -z "$pic_mode" && pic_mode=default |
| |
| # We assume here that the value for lt_cv_prog_cc_pic will not be cached |
| # in isolation, and that seeing it set (from the cache) indicates that |
| # the associated values are set (in the cache) correctly too. |
| AC_MSG_CHECKING([for $compiler option to produce PIC]) |
| AC_CACHE_VAL(lt_cv_prog_cc_pic, |
| [ lt_cv_prog_cc_pic= |
| lt_cv_prog_cc_shlib= |
| lt_cv_prog_cc_wl= |
| lt_cv_prog_cc_static= |
| lt_cv_prog_cc_no_builtin= |
| lt_cv_prog_cc_can_build_shared=$can_build_shared |
| |
| if test "$GCC" = yes; then |
| lt_cv_prog_cc_wl='-Wl,' |
| lt_cv_prog_cc_static='-static' |
| |
| case $host_os in |
| aix*) |
| # Below there is a dirty hack to force normal static linking with -ldl |
| # The problem is because libdl dynamically linked with both libc and |
| # libC (AIX C++ library), which obviously doesn't included in libraries |
| # list by gcc. This cause undefined symbols with -static flags. |
| # This hack allows C programs to be linked with "-static -ldl", but |
| # not sure about C++ programs. |
| lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" |
| ;; |
| amigaos*) |
| # FIXME: we need at least 68020 code to build shared libraries, but |
| # adding the `-m68020' flag to GCC prevents building anything better, |
| # like `-m68040'. |
| lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' |
| ;; |
| beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) |
| # PIC is the default for these OSes. |
| ;; |
| darwin* | rhapsody*) |
| # PIC is the default on this platform |
| # Common symbols not allowed in MH_DYLIB files |
| lt_cv_prog_cc_pic='-fno-common' |
| ;; |
| cygwin* | mingw* | pw32* | os2*) |
| # This hack is so that the source file can tell whether it is being |
| # built for inclusion in a dll (and should export symbols for example). |
| lt_cv_prog_cc_pic='-DDLL_EXPORT' |
| ;; |
| sysv4*MP*) |
| if test -d /usr/nec; then |
| lt_cv_prog_cc_pic=-Kconform_pic |
| fi |
| ;; |
| *) |
| lt_cv_prog_cc_pic='-fPIC' |
| ;; |
| esac |
| else |
| # PORTME Check for PIC flags for the system compiler. |
| case $host_os in |
| aix3* | aix4* | aix5*) |
| lt_cv_prog_cc_wl='-Wl,' |
| # All AIX code is PIC. |
| if test "$host_cpu" = ia64; then |
| # AIX 5 now supports IA64 processor |
| lt_cv_prog_cc_static='-Bstatic' |
| else |
| lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' |
| fi |
| ;; |
| |
| hpux9* | hpux10* | hpux11*) |
| # Is there a better lt_cv_prog_cc_static that works with the bundled CC? |
| lt_cv_prog_cc_wl='-Wl,' |
| lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" |
| lt_cv_prog_cc_pic='+Z' |
| ;; |
| |
| irix5* | irix6* | nonstopux*) |
| lt_cv_prog_cc_wl='-Wl,' |
| lt_cv_prog_cc_static='-non_shared' |
| # PIC (with -KPIC) is the default. |
| ;; |
| |
| cygwin* | mingw* | pw32* | os2*) |
| # This hack is so that the source file can tell whether it is being |
| # built for inclusion in a dll (and should export symbols for example). |
| lt_cv_prog_cc_pic='-DDLL_EXPORT' |
| ;; |
| |
| newsos6) |
| lt_cv_prog_cc_pic='-KPIC' |
| lt_cv_prog_cc_static='-Bstatic' |
| ;; |
| |
| osf3* | osf4* | osf5*) |
| # All OSF/1 code is PIC. |
| lt_cv_prog_cc_wl='-Wl,' |
| lt_cv_prog_cc_static='-non_shared' |
| ;; |
| |
| sco3.2v5*) |
| lt_cv_prog_cc_pic='-Kpic' |
| lt_cv_prog_cc_static='-dn' |
| lt_cv_prog_cc_shlib='-belf' |
| ;; |
| |
| solaris*) |
| lt_cv_prog_cc_pic='-KPIC' |
| lt_cv_prog_cc_static='-Bstatic' |
| lt_cv_prog_cc_wl='-Wl,' |
| ;; |
| |
| sunos4*) |
| lt_cv_prog_cc_pic='-PIC' |
| lt_cv_prog_cc_static='-Bstatic' |
| lt_cv_prog_cc_wl='-Qoption ld ' |
| ;; |
| |
| sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) |
| lt_cv_prog_cc_pic='-KPIC' |
| lt_cv_prog_cc_static='-Bstatic' |
| lt_cv_prog_cc_wl='-Wl,' |
| ;; |
| |
| uts4*) |
| lt_cv_prog_cc_pic='-pic' |
| lt_cv_prog_cc_static='-Bstatic' |
| ;; |
| |
| sysv4*MP*) |
| if test -d /usr/nec ;then |
| lt_cv_prog_cc_pic='-Kconform_pic' |
| lt_cv_prog_cc_static='-Bstatic' |
| fi |
| ;; |
| |
| *) |
| lt_cv_prog_cc_can_build_shared=no |
| ;; |
| esac |
| fi |
| ]) |
| if test -z "$lt_cv_prog_cc_pic"; then |
| AC_MSG_RESULT([none]) |
| else |
| AC_MSG_RESULT([$lt_cv_prog_cc_pic]) |
| |
| # Check to make sure the pic_flag actually works. |
| AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works]) |
| AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl |
| save_CFLAGS="$CFLAGS" |
| CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" |
| AC_TRY_COMPILE([], [], [dnl |
| case $host_os in |
| hpux9* | hpux10* | hpux11*) |
| # On HP-UX, both CC and GCC only warn that PIC is supported... then |
| # they create non-PIC objects. So, if there were any warnings, we |
| # assume that PIC is not supported. |
| if test -s conftest.err; then |
| lt_cv_prog_cc_pic_works=no |
| else |
| lt_cv_prog_cc_pic_works=yes |
| fi |
| ;; |
| *) |
| lt_cv_prog_cc_pic_works=yes |
| ;; |
| esac |
| ], [dnl |
| lt_cv_prog_cc_pic_works=no |
| ]) |
| CFLAGS="$save_CFLAGS" |
| ]) |
| |
| if test "X$lt_cv_prog_cc_pic_works" = Xno; then |
| lt_cv_prog_cc_pic= |
| lt_cv_prog_cc_can_build_shared=no |
| else |
| lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" |
| fi |
| |
| AC_MSG_RESULT([$lt_cv_prog_cc_pic_works]) |
| fi |
| |
| # Check for any special shared library compilation flags. |
| if test -n "$lt_cv_prog_cc_shlib"; then |
| AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries]) |
| if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then : |
| else |
| AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure]) |
| lt_cv_prog_cc_can_build_shared=no |
| fi |
| fi |
| |
| AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works]) |
| AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl |
| lt_cv_prog_cc_static_works=no |
| save_LDFLAGS="$LDFLAGS" |
| LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" |
| AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes]) |
| LDFLAGS="$save_LDFLAGS" |
| ]) |
| |
| # Belt *and* braces to stop my trousers falling down: |
| test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= |
| AC_MSG_RESULT([$lt_cv_prog_cc_static_works]) |
| |
| pic_flag="$lt_cv_prog_cc_pic" |
| special_shlib_compile_flags="$lt_cv_prog_cc_shlib" |
| wl="$lt_cv_prog_cc_wl" |
| link_static_flag="$lt_cv_prog_cc_static" |
| no_builtin_flag="$lt_cv_prog_cc_no_builtin" |
| can_build_shared="$lt_cv_prog_cc_can_build_shared" |
| |
| |
| # Check to see if options -o and -c are simultaneously supported by compiler |
| AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext]) |
| AC_CACHE_VAL([lt_cv_compiler_c_o], [ |
| $rm -r conftest 2>/dev/null |
| mkdir conftest |
| cd conftest |
| echo "int some_variable = 0;" > conftest.$ac_ext |
| mkdir out |
| # According to Tom Tromey, Ian Lance Taylor reported there are C compilers |
| # that will create temporary files in the current directory regardless of |
| # the output directory. Thus, making CWD read-only will cause this test |
| # to fail, enabling locking or at least warning the user not to do parallel |
| # builds. |
| chmod -w . |
| save_CFLAGS="$CFLAGS" |
| CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" |
| compiler_c_o=no |
| if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then |
| # The compiler can only warn and ignore the option if not recognized |
| # So say no if there are warnings |
| if test -s out/conftest.err; then |
| lt_cv_compiler_c_o=no |
| else |
| lt_cv_compiler_c_o=yes |
| fi |
| else |
| # Append any errors to the config.log. |
| cat out/conftest.err 1>&AC_FD_CC |
| lt_cv_compiler_c_o=no |
| fi |
| CFLAGS="$save_CFLAGS" |
| chmod u+w . |
| $rm conftest* out/* |
| rmdir out |
| cd .. |
| rmdir conftest |
| $rm -r conftest 2>/dev/null |
| ]) |
| compiler_c_o=$lt_cv_compiler_c_o |
| AC_MSG_RESULT([$compiler_c_o]) |
| |
| if test x"$compiler_c_o" = x"yes"; then |
| # Check to see if we can write to a .lo |
| AC_MSG_CHECKING([if $compiler supports -c -o file.lo]) |
| AC_CACHE_VAL([lt_cv_compiler_o_lo], [ |
| lt_cv_compiler_o_lo=no |
| save_CFLAGS="$CFLAGS" |
| CFLAGS="$CFLAGS -c -o conftest.lo" |
| save_objext="$ac_objext" |
| ac_objext=lo |
| AC_TRY_COMPILE([], [int some_variable = 0;], [dnl |
| # The compiler can only warn and ignore the option if not recognized |
| # So say no if there are warnings |
| if test -s conftest.err; then |
| lt_cv_compiler_o_lo=no |
| else |
| lt_cv_compiler_o_lo=yes |
| fi |
| ]) |
| ac_objext="$save_objext" |
| CFLAGS="$save_CFLAGS" |
| ]) |
| compiler_o_lo=$lt_cv_compiler_o_lo |
| AC_MSG_RESULT([$compiler_o_lo]) |
| else |
| compiler_o_lo=no |
| fi |
| |
| # Check to see if we can do hard links to lock some files if needed |
| hard_links="nottested" |
| if test "$compiler_c_o" = no && test "$need_locks" != no; then |
| # do not overwrite the value of need_locks provided by the user |
| AC_MSG_CHECKING([if we can lock with hard links]) |
| hard_links=yes |
| $rm conftest* |
| ln conftest.a conftest.b 2>/dev/null && hard_links=no |
| touch conftest.a |
| ln conftest.a conftest.b 2>&5 || hard_links=no |
| ln conftest.a conftest.b 2>/dev/null && hard_links=no |
| AC_MSG_RESULT([$hard_links]) |
| if test "$hard_links" = no; then |
| AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe]) |
| need_locks=warn |
| fi |
| else |
| need_locks=no |
| fi |
| |
| if test "$GCC" = yes; then |
| # Check to see if options -fno-rtti -fno-exceptions are supported by compiler |
| AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions]) |
| echo "int some_variable = 0;" > conftest.$ac_ext |
| save_CFLAGS="$CFLAGS" |
| CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" |
| compiler_rtti_exceptions=no |
| AC_TRY_COMPILE([], [int some_variable = 0;], [dnl |
| # The compiler can only warn and ignore the option if not recognized |
| # So say no if there are warnings |
| if test -s conftest.err; then |
| compiler_rtti_exceptions=no |
| else |
| compiler_rtti_exceptions=yes |
| fi |
| ]) |
| CFLAGS="$save_CFLAGS" |
| AC_MSG_RESULT([$compiler_rtti_exceptions]) |
| |
| if test "$compiler_rtti_exceptions" = "yes"; then |
| no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' |
| else |
| no_builtin_flag=' -fno-builtin' |
| fi |
| fi |
| |
| # See if the linker supports building shared libraries. |
| AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries]) |
| |
| allow_undefined_flag= |
| no_undefined_flag= |
| need_lib_prefix=unknown |
| need_version=unknown |
| # when you set need_version to no, make sure it does not cause -set_version |
| # flags to be left without arguments |
| archive_cmds= |
| archive_expsym_cmds= |
| old_archive_from_new_cmds= |
| old_archive_from_expsyms_cmds= |
| export_dynamic_flag_spec= |
| whole_archive_flag_spec= |
| thread_safe_flag_spec= |
| hardcode_into_libs=no |
| hardcode_libdir_flag_spec= |
| hardcode_libdir_separator= |
| hardcode_direct=no |
| hardcode_minus_L=no |
| hardcode_shlibpath_var=unsupported |
| runpath_var= |
| link_all_deplibs=unknown |
| always_export_symbols=no |
| export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' |
| # include_expsyms should be a list of space-separated symbols to be *always* |
| # included in the symbol list |
| include_expsyms= |
| # exclude_expsyms can be an egrep regular expression of symbols to exclude |
| # it will be wrapped by ` (' and `)$', so one must not match beginning or |
| # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', |
| # as well as any symbol that contains `d'. |
| exclude_expsyms="_GLOBAL_OFFSET_TABLE_" |
| # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out |
| # platforms (ab)use it in PIC code, but their linkers get confused if |
| # the symbol is explicitly referenced. Since portable code cannot |
| # rely on this symbol name, it's probably fine to never include it in |
| # preloaded symbol tables. |
| extract_expsyms_cmds= |
| |
| case $host_os in |
| cygwin* | mingw* | pw32*) |
| # FIXME: the MSVC++ port hasn't been tested in a loooong time |
| # When not using gcc, we currently assume that we are using |
| # Microsoft Visual C++. |
| if test "$GCC" != yes; then |
| with_gnu_ld=no |
| fi |
| ;; |
| openbsd*) |
| with_gnu_ld=no |
| ;; |
| esac |
| |
| ld_shlibs=yes |
| if test "$with_gnu_ld" = yes; then |
| # If archive_cmds runs LD, not CC, wlarc should be empty |
| wlarc='${wl}' |
| |
| # See if GNU ld supports shared libraries. |
| case $host_os in |
| aix3* | aix4* | aix5*) |
| # On AIX, the GNU linker is very broken |
| # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. |
| ld_shlibs=no |
| cat <<EOF 1>&2 |
| |
| *** Warning: the GNU linker, at least up to release 2.9.1, is reported |
| *** to be unable to reliably create shared libraries on AIX. |
| *** Therefore, libtool is disabling shared libraries support. If you |
| *** really care for shared libraries, you may want to modify your PATH |
| *** so that a non-GNU linker is found, and then restart. |
| |
| EOF |
| ;; |
| |
| amigaos*) |
| archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' |
| hardcode_libdir_flag_spec='-L$libdir' |
| hardcode_minus_L=yes |
| |
| # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports |
| # that the semantics of dynamic libraries on AmigaOS, at least up |
| # to version 4, is to share data among multiple programs linked |
| # with the same dynamic library. Since this doesn't match the |
| # behavior of shared libraries on other platforms, we can use |
| # them. |
| ld_shlibs=no |
| ;; |
| |
| beos*) |
| if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then |
| allow_undefined_flag=unsupported |
| # Joseph Beckenbach <jrb3@best.com> says some releases of gcc |
| # support --undefined. This deserves some investigation. FIXME |
| archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' |
| else |
| ld_shlibs=no |
| fi |
| ;; |
| |
| cygwin* | mingw* | pw32*) |
| # hardcode_libdir_flag_spec is actually meaningless, as there is |
| # no search path for DLLs. |
| hardcode_libdir_flag_spec='-L$libdir' |
| allow_undefined_flag=unsupported |
| always_export_symbols=yes |
| |
| extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ |
| sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ |
| test -f $output_objdir/impgen.exe || (cd $output_objdir && \ |
| if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ |
| else $CC -o impgen impgen.c ; fi)~ |
| $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' |
| |
| old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' |
| |
| # cygwin and mingw dlls have different entry points and sets of symbols |
| # to exclude. |
| # FIXME: what about values for MSVC? |
| dll_entry=__cygwin_dll_entry@12 |
| dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ |
| case $host_os in |
| mingw*) |
| # mingw values |
| dll_entry=_DllMainCRTStartup@12 |
| dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ |
| ;; |
| esac |
| |
| # mingw and cygwin differ, and it's simplest to just exclude the union |
| # of the two symbol sets. |
| dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 |
| |
| # recent cygwin and mingw systems supply a stub DllMain which the user |
| # can override, but on older systems we have to supply one (in ltdll.c) |
| if test "x$lt_cv_need_dllmain" = "xyes"; then |
| ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " |
| ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ |
| test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' |
| else |
| ltdll_obj= |
| ltdll_cmds= |
| fi |
| |
| # Extract the symbol export list from an `--export-all' def file, |
| # then regenerate the def file from the symbol export list, so that |
| # the compiled dll only exports the symbol export list. |
| # Be careful not to strip the DATA tag left be newer dlltools. |
| export_symbols_cmds="$ltdll_cmds"' |
| $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ |
| sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' |
| |
| # If the export-symbols file already is a .def file (1st line |
| # is EXPORTS), use it as is. |
| # If DATA tags from a recent dlltool are present, honour them! |
| archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then |
| cp $export_symbols $output_objdir/$soname-def; |
| else |
| echo EXPORTS > $output_objdir/$soname-def; |
| _lt_hint=1; |
| cat $export_symbols | while read symbol; do |
| set dummy \$symbol; |
| case \[$]# in |
| 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; |
| 4) echo " \[$]2 \[$]3 \[$]4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;; |
| *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; |
| esac; |
| _lt_hint=`expr 1 + \$_lt_hint`; |
| done; |
| fi~ |
| '"$ltdll_cmds"' |
| $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ |
| $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ |
| $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ |
| $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ |
| $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' |
| ;; |
| |
| netbsd*) |
| if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then |
| archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' |
| wlarc= |
| else |
| archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' |
| archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' |
| fi |
| ;; |
| |
| solaris* | sysv5*) |
| if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then |
| ld_shlibs=no |
| cat <<EOF 1>&2 |
| |
| *** Warning: The releases 2.8.* of the GNU linker cannot reliably |
| *** create shared libraries on Solaris systems. Therefore, libtool |
| *** is disabling shared libraries support. We urge you to upgrade GNU |
| *** binutils to release 2.9.1 or newer. Another option is to modify |
| *** your PATH or compiler configuration so that the native linker is |
| *** used, and then restart. |
| |
| EOF |
| elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then |
| archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' |
| archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' |
| else |
| ld_shlibs=no |
| fi |
| ;; |
| |
| sunos4*) |
| archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' |
| wlarc= |
| hardcode_direct=yes |
| hardcode_shlibpath_var=no |
| ;; |
| |
| *) |
| if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then |
| archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' |
| archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' |
| else |
| ld_shlibs=no |
| fi |
| ;; |
| esac |
| |
| if test "$ld_shlibs" = yes; then |
| runpath_var=LD_RUN_PATH |
| hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' |
| export_dynamic_flag_spec='${wl}--export-dynamic' |
| case $host_os in |
| cygwin* | mingw* | pw32*) |
| # dlltool doesn't understand --whole-archive et. al. |
| whole_archive_flag_spec= |
| ;; |
| *) |
| # ancient GNU ld didn't support --whole-archive et. al. |
| if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then |
| whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' |
| else |
| whole_archive_flag_spec= |
| fi |
| ;; |
| esac |
| fi |
| else |
| # PORTME fill in a description of your system's linker (not GNU ld) |
| case $host_os in |
| aix3*) |
| allow_undefined_flag=unsupported |
| always_export_symbols=yes |
| archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' |
| # Note: this linker hardcodes the directories in LIBPATH if there |
| # are no directories specified by -L. |
| hardcode_minus_L=yes |
| if test "$GCC" = yes && test -z "$link_static_flag"; then |
| # Neither direct hardcoding nor static linking is supported with a |
| # broken collect2. |
| hardcode_direct=unsupported |
| fi |
| ;; |
| |
| aix4* | aix5*) |
| if test "$host_cpu" = ia64; then |
| # On IA64, the linker does run time linking by default, so we don't |
| # have to do anything special. |
| aix_use_runtimelinking=no |
| exp_sym_flag='-Bexport' |
| no_entry_flag="" |
| else |
| aix_use_runtimelinking=no |
| |
| # Test if we are trying to use run time linking or normal |
| # AIX style linking. If -brtl is somewhere in LDFLAGS, we |
| # need to do runtime linking. |
| case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) |
| for ld_flag in $LDFLAGS; do |
| case $ld_flag in |
| *-brtl*) |
| aix_use_runtimelinking=yes |
| break |
| ;; |
| esac |
| done |
| esac |
| |
| exp_sym_flag='-bexport' |
| no_entry_flag='-bnoentry' |
| fi |
| |
| # When large executables or shared objects are built, AIX ld can |
| # have problems creating the table of contents. If linking a library |
| # or program results in "error TOC overflow" add -mminimal-toc to |
| # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not |
| # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. |
| |
| hardcode_direct=yes |
| archive_cmds='' |
| hardcode_libdir_separator=':' |
| if test "$GCC" = yes; then |
| case $host_os in aix4.[[012]]|aix4.[[012]].*) |
| collect2name=`${CC} -print-prog-name=collect2` |
| if test -f "$collect2name" && \ |
| strings "$collect2name" | grep resolve_lib_name >/dev/null |
| then |
| # We have reworked collect2 |
| hardcode_direct=yes |
| else |
| # We have old collect2 |
| hardcode_direct=unsupported |
| # It fails to find uninstalled libraries when the uninstalled |
| # path is not listed in the libpath. Setting hardcode_minus_L |
| # to unsupported forces relinking |
| hardcode_minus_L=yes |
| hardcode_libdir_flag_spec='-L$libdir' |
| hardcode_libdir_separator= |
| fi |
| esac |
| |
| shared_flag='-shared' |
| else |
| # not using gcc |
| if test "$host_cpu" = ia64; then |
| shared_flag='${wl}-G' |
| else |
| if test "$aix_use_runtimelinking" = yes; then |
| shared_flag='${wl}-G' |
| else |
| shared_flag='${wl}-bM:SRE' |
| fi |
| fi |
| fi |
| |
| # It seems that -bexpall can do strange things, so it is better to |
| # generate a list of symbols to export. |
| always_export_symbols=yes |
| if test "$aix_use_runtimelinking" = yes; then |
| # Warning - without using the other runtime loading flags (-brtl), |
| # -berok will link without error, but may produce a broken library. |
| allow_undefined_flag='-berok' |
| hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' |
| archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" |
| else |
| if test "$host_cpu" = ia64; then |
| hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' |
| allow_undefined_flag="-z nodefs" |
| archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" |
| else |
| hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' |
| # Warning - without using the other run time loading flags, |
| # -berok will link without error, but may produce a broken library. |
| allow_undefined_flag='${wl}-berok' |
| # This is a bit strange, but is similar to how AIX traditionally builds |
| # it's shared libraries. |
| archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname' |
| fi |
| fi |
| ;; |
| |
| amigaos*) |
| archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' |
| hardcode_libdir_flag_spec='-L$libdir' |
| hardcode_minus_L=yes |
| # see comment about different semantics on the GNU ld section |
| ld_shlibs=no |
| ;; |
| |
| cygwin* | mingw* | pw32*) |
| # When not using gcc, we currently assume that we are using |
| # Microsoft Visual C++. |
| # hardcode_libdir_flag_spec is actually meaningless, as there is |
| # no search path for DLLs. |
| hardcode_libdir_flag_spec=' ' |
| allow_undefined_flag=unsupported |
| # Tell ltmain to make .lib files, not .a files. |
| libext=lib |
| # FIXME: Setting linknames here is a bad hack. |
| archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' |
| # The linker will automatically build a .lib file if we build a DLL. |
| old_archive_from_new_cmds='true' |
| # FIXME: Should let the user specify the lib program. |
| old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' |
| fix_srcfile_path='`cygpath -w "$srcfile"`' |
| ;; |
| |
| darwin* | rhapsody*) |
| case "$host_os" in |
| rhapsody* | darwin1.[[012]]) |
| allow_undefined_flag='-undefined suppress' |
| ;; |
| *) # Darwin 1.3 on |
| allow_undefined_flag='-flat_namespace -undefined suppress' |
| ;; |
| esac |
| # FIXME: Relying on posixy $() will cause problems for |
| # cross-compilation, but unfortunately the echo tests do not |
| # yet detect zsh echo's removal of \ escapes. Also zsh mangles |
| # `"' quotes if we put them in here... so don't! |
| archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)' |
| # We need to add '_' to the symbols in $export_symbols first |
| #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' |
| hardcode_direct=yes |
| hardcode_shlibpath_var=no |
| whole_archive_flag_spec='-all_load $convenience' |
| ;; |
| |
| freebsd1*) |
| ld_shlibs=no |
| ;; |
| |
| # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor |
| # support. Future versions do this automatically, but an explicit c++rt0.o |
| # does not break anything, and helps significantly (at the cost of a little |
| # extra space). |
| freebsd2.2*) |
| archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' |
| hardcode_libdir_flag_spec='-R$libdir' |
| hardcode_direct=yes |
| hardcode_shlibpath_var=no |
| ;; |
| |
| # Unfortunately, older versions of FreeBSD 2 do not have this feature. |
| freebsd2*) |
| archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' |
| hardcode_direct=yes |
| hardcode_minus_L=yes |
| hardcode_shlibpath_var=no |
| ;; |
| |
| # FreeBSD 3 and greater uses gcc -shared to do shared libraries. |
| freebsd*) |
| archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' |
| hardcode_libdir_flag_spec='-R$libdir' |
| hardcode_direct=yes |
| hardcode_shlibpath_var=no |
| ;; |
| |
| hpux9* | hpux10* | hpux11*) |
| case $host_os in |
| hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; |
| *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; |
| esac |
| hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' |
| hardcode_libdir_separator=: |
| hardcode_direct=yes |
| hardcode_minus_L=yes # Not in the search PATH, but as the default |
| # location of the library. |
| export_dynamic_flag_spec='${wl}-E' |
| ;; |
| |
| irix5* | irix6* | nonstopux*) |
| if test "$GCC" = yes; then |
| archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' |
| hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' |
| else |
| archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' |
| hardcode_libdir_flag_spec='-rpath $libdir' |
| fi |
| hardcode_libdir_separator=: |
| link_all_deplibs=yes |
| ;; |
| |
| netbsd*) |
| if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then |
| archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out |
| else |
| archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF |
| fi |
| hardcode_libdir_flag_spec='-R$libdir' |
| hardcode_direct=yes |
| hardcode_shlibpath_var=no |
| ;; |
| |
| newsos6) |
| archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' |
| hardcode_direct=yes |
| hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' |
| hardcode_libdir_separator=: |
| hardcode_shlibpath_var=no |
| ;; |
| |
| openbsd*) |
| hardcode_direct=yes |
| hardcode_shlibpath_var=no |
| if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then |
| archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' |
| hardcode_libdir_flag_spec='${wl}-rpath,$libdir' |
| export_dynamic_flag_spec='${wl}-E' |
| else |
| case "$host_os" in |
| openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) |
| archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' |
| hardcode_libdir_flag_spec='-R$libdir' |
| ;; |
| *) |
| archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' |
| hardcode_libdir_flag_spec='${wl}-rpath,$libdir' |
| ;; |
| esac |
| fi |
| ;; |
| |
| os2*) |
| hardcode_libdir_flag_spec='-L$libdir' |
| hardcode_minus_L=yes |
| allow_undefined_flag=unsupported |
| archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' |
| old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' |
| ;; |
| |
| osf3*) |
| if test "$GCC" = yes; then |
| allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' |
| archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' |
| else |
| allow_undefined_flag=' -expect_unresolved \*' |
| archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' |
| fi |
| hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' |
| hardcode_libdir_separator=: |
| ;; |
| |
| osf4* | osf5*) # as osf3* with the addition of -msym flag |
| if test "$GCC" = yes; then |
| allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' |
| archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' |
| hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' |
| else |
| allow_undefined_flag=' -expect_unresolved \*' |
| archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' |
| archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ |
| $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' |
| |
| #Both c and cxx compiler support -rpath directly |
| hardcode_libdir_flag_spec='-rpath $libdir' |
| fi |
| hardcode_libdir_separator=: |
| ;; |
| |
| sco3.2v5*) |
| archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' |
| hardcode_shlibpath_var=no |
| runpath_var=LD_RUN_PATH |
| hardcode_runpath_var=yes |
| export_dynamic_flag_spec='${wl}-Bexport' |
| ;; |
| |
| solaris*) |
| # gcc --version < 3.0 without binutils cannot create self contained |
| # shared libraries reliably, requiring libgcc.a to resolve some of |
| # the object symbols generated in some cases. Libraries that use |
| # assert need libgcc.a to resolve __eprintf, for example. Linking |
| # a copy of libgcc.a into every shared library to guarantee resolving |
| # such symbols causes other problems: According to Tim Van Holder |
| # <tim.van.holder@pandora.be>, C++ libraries end up with a separate |
| # (to the application) exception stack for one thing. |
| no_undefined_flag=' -z defs' |
| if test "$GCC" = yes; then |
| case `$CC --version 2>/dev/null` in |
| [[12]].*) |
| cat <<EOF 1>&2 |
| |
| *** Warning: Releases of GCC earlier than version 3.0 cannot reliably |
| *** create self contained shared libraries on Solaris systems, without |
| *** introducing a dependency on libgcc.a. Therefore, libtool is disabling |
| *** -no-undefined support, which will at least allow you to build shared |
| *** libraries. However, you may find that when you link such libraries |
| *** into an application without using GCC, you have to manually add |
| *** \`gcc --print-libgcc-file-name\` to the link command. We urge you to |
| *** upgrade to a newer version of GCC. Another option is to rebuild your |
| *** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. |
| |
| EOF |
| no_undefined_flag= |
| ;; |
| esac |
| fi |
| # $CC -shared without GNU ld will not create a library from C++ |
| # object files and a static libstdc++, better avoid it by now |
| archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' |
| archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ |
| $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' |
| hardcode_libdir_flag_spec='-R$libdir' |
| hardcode_shlibpath_var=no |
| case $host_os in |
| solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; |
| *) # Supported since Solaris 2.6 (maybe 2.5.1?) |
| whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; |
| esac |
| link_all_deplibs=yes |
| ;; |
| |
| sunos4*) |
| if test "x$host_vendor" = xsequent; then |
| # Use $CC to link under sequent, because it throws in some extra .o |
| # files that make .init and .fini sections work. |
| archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' |
| else |
| archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' |
| fi |
| hardcode_libdir_flag_spec='-L$libdir' |
| hardcode_direct=yes |
| hardcode_minus_L=yes |
| hardcode_shlibpath_var=no |
| ;; |
| |
| sysv4) |
| case $host_vendor in |
| sni) |
| archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' |
| hardcode_direct=yes # is this really true??? |
| ;; |
| siemens) |
| ## LD is ld it makes a PLAMLIB |
| ## CC just makes a GrossModule. |
| archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' |
| reload_cmds='$CC -r -o $output$reload_objs' |
| hardcode_direct=no |
| ;; |
| motorola) |
| archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' |
| hardcode_direct=no #Motorola manual says yes, but my tests say they lie |
| ;; |
| esac |
| runpath_var='LD_RUN_PATH' |
| hardcode_shlibpath_var=no |
| ;; |
| |
| sysv4.3*) |
| archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' |
| hardcode_shlibpath_var=no |
| export_dynamic_flag_spec='-Bexport' |
| ;; |
| |
| sysv5*) |
| no_undefined_flag=' -z text' |
| # $CC -shared without GNU ld will not create a library from C++ |
| # object files and a static libstdc++, better avoid it by now |
| archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' |
| archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ |
| $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' |
| hardcode_libdir_flag_spec= |
| hardcode_shlibpath_var=no |
| runpath_var='LD_RUN_PATH' |
| ;; |
| |
| uts4*) |
| archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' |
| hardcode_libdir_flag_spec='-L$libdir' |
| hardcode_shlibpath_var=no |
| ;; |
| |
| dgux*) |
| archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' |
| hardcode_libdir_flag_spec='-L$libdir' |
| hardcode_shlibpath_var=no |
| ;; |
| |
| sysv4*MP*) |
| if test -d /usr/nec; then |
| archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' |
| hardcode_shlibpath_var=no |
| runpath_var=LD_RUN_PATH |
| hardcode_runpath_var=yes |
| ld_shlibs=yes |
| fi |
| ;; |
| |
| sysv4.2uw2*) |
| archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' |
| hardcode_direct=yes |
| hardcode_minus_L=no |
| hardcode_shlibpath_var=no |
| hardcode_runpath_var=yes |
| runpath_var=LD_RUN_PATH |
| ;; |
| |
| sysv5uw7* | unixware7*) |
| no_undefined_flag='${wl}-z ${wl}text' |
| if test "$GCC" = yes; then |
| archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' |
| else |
| archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' |
| fi |
| runpath_var='LD_RUN_PATH' |
| hardcode_shlibpath_var=no |
| ;; |
| |
| *) |
| ld_shlibs=no |
| ;; |
| esac |
| fi |
| AC_MSG_RESULT([$ld_shlibs]) |
| test "$ld_shlibs" = no && can_build_shared=no |
| |
| # Check hardcoding attributes. |
| AC_MSG_CHECKING([how to hardcode library paths into programs]) |
| hardcode_action= |
| if test -n "$hardcode_libdir_flag_spec" || \ |
| test -n "$runpath_var"; then |
| |
| # We can hardcode non-existant directories. |
| if test "$hardcode_direct" != no && |
| # If the only mechanism to avoid hardcoding is shlibpath_var, we |
| # have to relink, otherwise we might link with an installed library |
| # when we should be linking with a yet-to-be-installed one |
| ## test "$hardcode_shlibpath_var" != no && |
| test "$hardcode_minus_L" != no; then |
| # Linking always hardcodes the temporary library directory. |
| hardcode_action=relink |
| else |
| # We can link without hardcoding, and we can hardcode nonexisting dirs. |
| hardcode_action=immediate |
| fi |
| else |
| # We cannot hardcode anything, or else we can only hardcode existing |
| # directories. |
| hardcode_action=unsupported |
| fi |
| AC_MSG_RESULT([$hardcode_action]) |
| |
| striplib= |
| old_striplib= |
| AC_MSG_CHECKING([whether stripping libraries is possible]) |
| if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then |
| test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" |
| test -z "$striplib" && striplib="$STRIP --strip-unneeded" |
| AC_MSG_RESULT([yes]) |
| else |
| AC_MSG_RESULT([no]) |
| fi |
| |
| reload_cmds='$LD$reload_flag -o $output$reload_objs' |
| test -z "$deplibs_check_method" && deplibs_check_method=unknown |
| |
| # PORTME Fill in your ld.so characteristics |
| AC_MSG_CHECKING([dynamic linker characteristics]) |
| library_names_spec= |
| libname_spec='lib$name' |
| soname_spec= |
| postinstall_cmds= |
| postuninstall_cmds= |
| finish_cmds= |
| finish_eval= |
| shlibpath_var= |
| shlibpath_overrides_runpath=unknown |
| version_type=none |
| dynamic_linker="$host_os ld.so" |
| sys_lib_dlsearch_path_spec="/lib /usr/lib" |
| sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" |
| |
| case $host_os in |
| aix3*) |
| version_type=linux |
| library_names_spec='${libname}${release}.so$versuffix $libname.a' |
| shlibpath_var=LIBPATH |
| |
| # AIX has no versioning support, so we append a major version to the name. |
| soname_spec='${libname}${release}.so$major' |
| ;; |
| |
| aix4* | aix5*) |
| version_type=linux |
| need_lib_prefix=no |
| need_version=no |
| hardcode_into_libs=yes |
| if test "$host_cpu" = ia64; then |
| # AIX 5 supports IA64 |
| library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' |
| shlibpath_var=LD_LIBRARY_PATH |
| else |
| # With GCC up to 2.95.x, collect2 would create an import file |
| # for dependence libraries. The import file would start with |
| # the line `#! .'. This would cause the generated library to |
| # depend on `.', always an invalid library. This was fixed in |
| # development snapshots of GCC prior to 3.0. |
| case $host_os in |
| aix4 | aix4.[[01]] | aix4.[[01]].*) |
| if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' |
| echo ' yes ' |
| echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then |
| : |
| else |
| can_build_shared=no |
| fi |
| ;; |
| esac |
| # AIX (on Power*) has no versioning support, so currently we can |
| # not hardcode correct soname into executable. Probably we can |
| # add versioning support to collect2, so additional links can |
| # be useful in future. |
| if test "$aix_use_runtimelinking" = yes; then |
| # If using run time linking (on AIX 4.2 or later) use lib<name>.so |
| # instead of lib<name>.a to let people know that these are not |
| # typical AIX shared libraries. |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' |
| else |
| # We preserve .a as extension for shared libraries through AIX4.2 |
| # and later when we are not doing run time linking. |
| library_names_spec='${libname}${release}.a $libname.a' |
| soname_spec='${libname}${release}.so$major' |
| fi |
| shlibpath_var=LIBPATH |
| fi |
| hardcode_into_libs=yes |
| ;; |
| |
| amigaos*) |
| library_names_spec='$libname.ixlibrary $libname.a' |
| # Create ${libname}_ixlibrary.a entries in /sys/libs. |
| finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' |
| ;; |
| |
| beos*) |
| library_names_spec='${libname}.so' |
| dynamic_linker="$host_os ld.so" |
| shlibpath_var=LIBRARY_PATH |
| ;; |
| |
| bsdi4*) |
| version_type=linux |
| need_version=no |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' |
| soname_spec='${libname}${release}.so$major' |
| finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' |
| shlibpath_var=LD_LIBRARY_PATH |
| sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" |
| sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" |
| export_dynamic_flag_spec=-rdynamic |
| # the default ld.so.conf also contains /usr/contrib/lib and |
| # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow |
| # libtool to hard-code these into programs |
| ;; |
| |
| cygwin* | mingw* | pw32*) |
| version_type=windows |
| need_version=no |
| need_lib_prefix=no |
| case $GCC,$host_os in |
| yes,cygwin*) |
| library_names_spec='$libname.dll.a' |
| soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' |
| postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ |
| dldir=$destdir/`dirname \$dlpath`~ |
| test -d \$dldir || mkdir -p \$dldir~ |
| $install_prog .libs/$dlname \$dldir/$dlname' |
| postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ |
| dlpath=$dir/\$dldll~ |
| $rm \$dlpath' |
| ;; |
| yes,mingw*) |
| library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' |
| sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"` |
| ;; |
| yes,pw32*) |
| library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' |
| ;; |
| *) |
| library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' |
| ;; |
| esac |
| dynamic_linker='Win32 ld.exe' |
| # FIXME: first we should search . and the directory the executable is in |
| shlibpath_var=PATH |
| ;; |
| |
| darwin* | rhapsody*) |
| dynamic_linker="$host_os dyld" |
| version_type=darwin |
| need_lib_prefix=no |
| need_version=no |
| # FIXME: Relying on posixy $() will cause problems for |
| # cross-compilation, but unfortunately the echo tests do not |
| # yet detect zsh echo's removal of \ escapes. |
| library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' |
| soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' |
| shlibpath_overrides_runpath=yes |
| shlibpath_var=DYLD_LIBRARY_PATH |
| ;; |
| |
| freebsd1*) |
| dynamic_linker=no |
| ;; |
| |
| freebsd*-gnu*) |
| version_type=linux |
| need_lib_prefix=no |
| need_version=no |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' |
| soname_spec='${libname}${release}.so$major' |
| shlibpath_var=LD_LIBRARY_PATH |
| shlibpath_overrides_runpath=no |
| hardcode_into_libs=yes |
| dynamic_linker='GNU/FreeBSD ld.so' |
| ;; |
| |
| freebsd*) |
| objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` |
| version_type=freebsd-$objformat |
| case $version_type in |
| freebsd-elf*) |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' |
| need_version=no |
| need_lib_prefix=no |
| ;; |
| freebsd-*) |
| library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' |
| need_version=yes |
| ;; |
| esac |
| shlibpath_var=LD_LIBRARY_PATH |
| case $host_os in |
| freebsd2*) |
| shlibpath_overrides_runpath=yes |
| ;; |
| *) |
| shlibpath_overrides_runpath=no |
| hardcode_into_libs=yes |
| ;; |
| esac |
| ;; |
| |
| gnu*) |
| version_type=linux |
| need_lib_prefix=no |
| need_version=no |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' |
| soname_spec='${libname}${release}.so$major' |
| shlibpath_var=LD_LIBRARY_PATH |
| hardcode_into_libs=yes |
| ;; |
| |
| hpux9* | hpux10* | hpux11*) |
| # Give a soname corresponding to the major version so that dld.sl refuses to |
| # link against other versions. |
| dynamic_linker="$host_os dld.sl" |
| version_type=sunos |
| need_lib_prefix=no |
| need_version=no |
| shlibpath_var=SHLIB_PATH |
| shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH |
| library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' |
| soname_spec='${libname}${release}.sl$major' |
| # HP-UX runs *really* slowly unless shared libraries are mode 555. |
| postinstall_cmds='chmod 555 $lib' |
| ;; |
| |
| irix5* | irix6* | nonstopux*) |
| case $host_os in |
| nonstopux*) version_type=nonstopux ;; |
| *) version_type=irix ;; |
| esac |
| need_lib_prefix=no |
| need_version=no |
| soname_spec='${libname}${release}.so$major' |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' |
| case $host_os in |
| irix5* | nonstopux*) |
| libsuff= shlibsuff= |
| ;; |
| *) |
| case $LD in # libtool.m4 will add one of these switches to LD |
| *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; |
| *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; |
| *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; |
| *) libsuff= shlibsuff= libmagic=never-match;; |
| esac |
| ;; |
| esac |
| shlibpath_var=LD_LIBRARY${shlibsuff}_PATH |
| shlibpath_overrides_runpath=no |
| sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" |
| sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" |
| ;; |
| |
| # No shared lib support for Linux oldld, aout, or coff. |
| linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) |
| dynamic_linker=no |
| ;; |
| |
| # This must be Linux ELF. |
| linux-gnu*) |
| version_type=linux |
| need_lib_prefix=no |
| need_version=no |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' |
| soname_spec='${libname}${release}.so$major' |
| finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' |
| shlibpath_var=LD_LIBRARY_PATH |
| shlibpath_overrides_runpath=no |
| # This implies no fast_install, which is unacceptable. |
| # Some rework will be needed to allow for fast_install |
| # before this can be enabled. |
| hardcode_into_libs=yes |
| |
| # We used to test for /lib/ld.so.1 and disable shared libraries on |
| # powerpc, because MkLinux only supported shared libraries with the |
| # GNU dynamic linker. Since this was broken with cross compilers, |
| # most powerpc-linux boxes support dynamic linking these days and |
| # people can always --disable-shared, the test was removed, and we |
| # assume the GNU/Linux dynamic linker is in use. |
| dynamic_linker='GNU/Linux ld.so' |
| ;; |
| |
| netbsd*) |
| version_type=sunos |
| need_lib_prefix=no |
| need_version=no |
| if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then |
| library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' |
| finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' |
| dynamic_linker='NetBSD (a.out) ld.so' |
| else |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' |
| soname_spec='${libname}${release}.so$major' |
| dynamic_linker='NetBSD ld.elf_so' |
| fi |
| shlibpath_var=LD_LIBRARY_PATH |
| shlibpath_overrides_runpath=yes |
| hardcode_into_libs=yes |
| ;; |
| |
| newsos6) |
| version_type=linux |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' |
| shlibpath_var=LD_LIBRARY_PATH |
| shlibpath_overrides_runpath=yes |
| ;; |
| |
| openbsd*) |
| version_type=sunos |
| need_lib_prefix=no |
| need_version=no |
| if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then |
| case "$host_os" in |
| openbsd2.[[89]] | openbsd2.[[89]].*) |
| shlibpath_overrides_runpath=no |
| ;; |
| *) |
| shlibpath_overrides_runpath=yes |
| ;; |
| esac |
| else |
| shlibpath_overrides_runpath=yes |
| fi |
| library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' |
| finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' |
| shlibpath_var=LD_LIBRARY_PATH |
| ;; |
| |
| os2*) |
| libname_spec='$name' |
| need_lib_prefix=no |
| library_names_spec='$libname.dll $libname.a' |
| dynamic_linker='OS/2 ld.exe' |
| shlibpath_var=LIBPATH |
| ;; |
| |
| osf3* | osf4* | osf5*) |
| version_type=osf |
| need_version=no |
| need_lib_prefix=no |
| soname_spec='${libname}${release}.so$major' |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' |
| shlibpath_var=LD_LIBRARY_PATH |
| sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" |
| sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" |
| hardcode_into_libs=yes |
| ;; |
| |
| sco3.2v5*) |
| version_type=osf |
| soname_spec='${libname}${release}.so$major' |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' |
| shlibpath_var=LD_LIBRARY_PATH |
| ;; |
| |
| solaris*) |
| version_type=linux |
| need_lib_prefix=no |
| need_version=no |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' |
| soname_spec='${libname}${release}.so$major' |
| shlibpath_var=LD_LIBRARY_PATH |
| shlibpath_overrides_runpath=yes |
| hardcode_into_libs=yes |
| # ldd complains unless libraries are executable |
| postinstall_cmds='chmod +x $lib' |
| ;; |
| |
| sunos4*) |
| version_type=sunos |
| library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' |
| finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' |
| shlibpath_var=LD_LIBRARY_PATH |
| shlibpath_overrides_runpath=yes |
| if test "$with_gnu_ld" = yes; then |
| need_lib_prefix=no |
| fi |
| need_version=yes |
| ;; |
| |
| sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) |
| version_type=linux |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' |
| soname_spec='${libname}${release}.so$major' |
| shlibpath_var=LD_LIBRARY_PATH |
| case $host_vendor in |
| sni) |
| shlibpath_overrides_runpath=no |
| need_lib_prefix=no |
| export_dynamic_flag_spec='${wl}-Blargedynsym' |
| runpath_var=LD_RUN_PATH |
| ;; |
| siemens) |
| need_lib_prefix=no |
| ;; |
| motorola) |
| need_lib_prefix=no |
| need_version=no |
| shlibpath_overrides_runpath=no |
| sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' |
| ;; |
| esac |
| ;; |
| |
| uts4*) |
| version_type=linux |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' |
| soname_spec='${libname}${release}.so$major' |
| shlibpath_var=LD_LIBRARY_PATH |
| ;; |
| |
| dgux*) |
| version_type=linux |
| need_lib_prefix=no |
| need_version=no |
| library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' |
| soname_spec='${libname}${release}.so$major' |
| shlibpath_var=LD_LIBRARY_PATH |
| ;; |
| |
| sysv4*MP*) |
| if test -d /usr/nec ;then |
| version_type=linux |
| library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' |
| soname_spec='$libname.so.$major' |
| shlibpath_var=LD_LIBRARY_PATH |
| fi |
| ;; |
| |
| *) |
| dynamic_linker=no |
| ;; |
| esac |
| AC_MSG_RESULT([$dynamic_linker]) |
| test "$dynamic_linker" = no && can_build_shared=no |
| |
| # Report the final consequences. |
| AC_MSG_CHECKING([if libtool supports shared libraries]) |
| AC_MSG_RESULT([$can_build_shared]) |
| |
| AC_MSG_CHECKING([whether to build shared libraries]) |
| test "$can_build_shared" = "no" && enable_shared=no |
| |
| # On AIX, shared libraries and static libraries use the same namespace, and |
| # are all built from PIC. |
| case "$host_os" in |
| aix3*) |
| test "$enable_shared" = yes && enable_static=no |
| if test -n "$RANLIB"; then |
| archive_cmds="$archive_cmds~\$RANLIB \$lib" |
| postinstall_cmds='$RANLIB $lib' |
| fi |
| ;; |
| |
| aix4*) |
| if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then |
| test "$enable_shared" = yes && enable_static=no |
| fi |
| ;; |
| esac |
| AC_MSG_RESULT([$enable_shared]) |
| |
| AC_MSG_CHECKING([whether to build static libraries]) |
| # Make sure either enable_shared or enable_static is yes. |
| test "$enable_shared" = yes || enable_static=yes |
| AC_MSG_RESULT([$enable_static]) |
| |
| if test "$hardcode_action" = relink; then |
| # Fast installation is not supported |
| enable_fast_install=no |
| elif test "$shlibpath_overrides_runpath" = yes || |
| test "$enable_shared" = no; then |
| # Fast installation is not necessary |
| enable_fast_install=needless |
| fi |
| |
| variables_saved_for_relink="PATH $shlibpath_var $runpath_var" |
| if test "$GCC" = yes; then |
| variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" |
| fi |
| |
| AC_LIBTOOL_DLOPEN_SELF |
| |
| if test "$enable_shared" = yes && test "$GCC" = yes; then |
| case $archive_cmds in |
| *'~'*) |
| # FIXME: we may have to deal with multi-command sequences. |
| ;; |
| '$CC '*) |
| # Test whether the compiler implicitly links with -lc since on some |
| # systems, -lgcc has to come before -lc. If gcc already passes -lc |
| # to ld, don't add -lc before -lgcc. |
| AC_MSG_CHECKING([whether -lc should be explicitly linked in]) |
| AC_CACHE_VAL([lt_cv_archive_cmds_need_lc], |
| [$rm conftest* |
| echo 'static int dummy;' > conftest.$ac_ext |
| |
| if AC_TRY_EVAL(ac_compile); then |
| soname=conftest |
| lib=conftest |
| libobjs=conftest.$ac_objext |
| deplibs= |
| wl=$lt_cv_prog_cc_wl |
| compiler_flags=-v |
| linker_flags=-v |
| verstring= |
| output_objdir=. |
| libname=conftest |
| save_allow_undefined_flag=$allow_undefined_flag |
| allow_undefined_flag= |
| if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) |
| then |
| lt_cv_archive_cmds_need_lc=no |
| else |
| lt_cv_archive_cmds_need_lc=yes |
| fi |
| allow_undefined_flag=$save_allow_undefined_flag |
| else |
| cat conftest.err 1>&5 |
| fi]) |
| AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc]) |
| ;; |
| esac |
| fi |
| need_lc=${lt_cv_archive_cmds_need_lc-yes} |
| |
| # The second clause should only fire when bootstrapping the |
| # libtool distribution, otherwise you forgot to ship ltmain.sh |
| # with your package, and you will get complaints that there are |
| # no rules to generate ltmain.sh. |
| if test -f "$ltmain"; then |
| : |
| else |
| # If there is no Makefile yet, we rely on a make rule to execute |
| # `config.status --recheck' to rerun these tests and create the |
| # libtool script then. |
| test -f Makefile && make "$ltmain" |
| fi |
| |
| if test -f "$ltmain"; then |
| trap "$rm \"${ofile}T\"; exit 1" 1 2 15 |
| $rm -f "${ofile}T" |
| |
| echo creating $ofile |
| |
| # Now quote all the things that may contain metacharacters while being |
| # careful not to overquote the AC_SUBSTed values. We take copies of the |
| # variables and quote the copies for generation of the libtool script. |
| for var in echo old_CC old_CFLAGS SED \ |
| AR AR_FLAGS CC LD LN_S NM SHELL \ |
| reload_flag reload_cmds wl \ |
| pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ |
| thread_safe_flag_spec whole_archive_flag_spec libname_spec \ |
| library_names_spec soname_spec \ |
| RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ |
| old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ |
| postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ |
| old_striplib striplib file_magic_cmd export_symbols_cmds \ |
| deplibs_check_method allow_undefined_flag no_undefined_flag \ |
| finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ |
| global_symbol_to_c_name_address \ |
| hardcode_libdir_flag_spec hardcode_libdir_separator \ |
| sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ |
| compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do |
| |
| case $var in |
| reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ |
| old_postinstall_cmds | old_postuninstall_cmds | \ |
| export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ |
| extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ |
| postinstall_cmds | postuninstall_cmds | \ |
| finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) |
| # Double-quote double-evaled strings. |
| eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" |
| ;; |
| *) |
| eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" |
| ;; |
| esac |
| done |
| |
| cat <<__EOF__ > "${ofile}T" |
| #! $SHELL |
| |
| # `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. |
| # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) |
| # NOTE: Changes made to this file will be lost: look at ltmain.sh. |
| # |
| # Copyright (C) 1996-2000 Free Software Foundation, Inc. |
| # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, but |
| # WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| # General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| # |
| # As a special exception to the GNU General Public License, if you |
| # distribute this file as part of a program that contains a |
| # configuration script generated by Autoconf, you may include it under |
| # the same distribution terms that you use for the rest of that program. |
| |
| # A sed that does not truncate output. |
| SED=$lt_SED |
| |
| # Sed that helps us avoid accidentally triggering echo(1) options like -n. |
| Xsed="${SED} -e s/^X//" |
| |
| # The HP-UX ksh and POSIX shell print the target directory to stdout |
| # if CDPATH is set. |
| if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi |
| |
| # ### BEGIN LIBTOOL CONFIG |
| |
| # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: |
| |
| # Shell to use when invoking shell scripts. |
| SHELL=$lt_SHELL |
| |
| # Whether or not to build shared libraries. |
| build_libtool_libs=$enable_shared |
| |
| # Whether or not to build static libraries. |
| build_old_libs=$enable_static |
| |
| # Whether or not to add -lc for building shared libraries. |
| build_libtool_need_lc=$need_lc |
| |
| # Whether or not to optimize for fast installation. |
| fast_install=$enable_fast_install |
| |
| # The host system. |
| host_alias=$host_alias |
| host=$host |
| |
| # An echo program that does not interpret backslashes. |
| echo=$lt_echo |
| |
| # The archiver. |
| AR=$lt_AR |
| AR_FLAGS=$lt_AR_FLAGS |
| |
| # The default C compiler. |
| CC=$lt_CC |
| |
| # Is the compiler the GNU C compiler? |
| with_gcc=$GCC |
| |
| # The linker used to build libraries. |
| LD=$lt_LD |
| |
| # Whether we need hard or soft links. |
| LN_S=$lt_LN_S |
| |
| # A BSD-compatible nm program. |
| NM=$lt_NM |
| |
| # A symbol stripping program |
| STRIP=$STRIP |
| |
| # Used to examine libraries when file_magic_cmd begins "file" |
| MAGIC_CMD=$MAGIC_CMD |
| |
| # Used on cygwin: DLL creation program. |
| DLLTOOL="$DLLTOOL" |
| |
| # Used on cygwin: object dumper. |
| OBJDUMP="$OBJDUMP" |
| |
| # Used on cygwin: assembler. |
| AS="$AS" |
| |
| # The name of the directory that contains temporary libtool files. |
| objdir=$objdir |
| |
| # How to create reloadable object files. |
| reload_flag=$lt_reload_flag |
| reload_cmds=$lt_reload_cmds |
| |
| # How to pass a linker flag through the compiler. |
| wl=$lt_wl |
| |
| # Object file suffix (normally "o"). |
| objext="$ac_objext" |
| |
| # Old archive suffix (normally "a"). |
| libext="$libext" |
| |
| # Executable file suffix (normally ""). |
| exeext="$exeext" |
| |
| # Additional compiler flags for building library objects. |
| pic_flag=$lt_pic_flag |
| pic_mode=$pic_mode |
| |
| # Does compiler simultaneously support -c and -o options? |
| compiler_c_o=$lt_compiler_c_o |
| |
| # Can we write directly to a .lo ? |
| compiler_o_lo=$lt_compiler_o_lo |
| |
| # Must we lock files when doing compilation ? |
| need_locks=$lt_need_locks |
| |
| # Do we need the lib prefix for modules? |
| need_lib_prefix=$need_lib_prefix |
| |
| # Do we need a version for libraries? |
| need_version=$need_version |
| |
| # Whether dlopen is supported. |
| dlopen_support=$enable_dlopen |
| |
| # Whether dlopen of programs is supported. |
| dlopen_self=$enable_dlopen_self |
| |
| # Whether dlopen of statically linked programs is supported. |
| dlopen_self_static=$enable_dlopen_self_static |
| |
| # Compiler flag to prevent dynamic linking. |
| link_static_flag=$lt_link_static_flag |
| |
| # Compiler flag to turn off builtin functions. |
| no_builtin_flag=$lt_no_builtin_flag |
| |
| # Compiler flag to allow reflexive dlopens. |
| export_dynamic_flag_spec=$lt_export_dynamic_flag_spec |
| |
| # Compiler flag to generate shared objects directly from archives. |
| whole_archive_flag_spec=$lt_whole_archive_flag_spec |
| |
| # Compiler flag to generate thread-safe objects. |
| thread_safe_flag_spec=$lt_thread_safe_flag_spec |
| |
| # Library versioning type. |
| version_type=$version_type |
| |
| # Format of library name prefix. |
| libname_spec=$lt_libname_spec |
| |
| # List of archive names. First name is the real one, the rest are links. |
| # The last name is the one that the linker finds with -lNAME. |
| library_names_spec=$lt_library_names_spec |
| |
| # The coded name of the library, if different from the real name. |
| soname_spec=$lt_soname_spec |
| |
| # Commands used to build and install an old-style archive. |
| RANLIB=$lt_RANLIB |
| old_archive_cmds=$lt_old_archive_cmds |
| old_postinstall_cmds=$lt_old_postinstall_cmds |
| old_postuninstall_cmds=$lt_old_postuninstall_cmds |
| |
| # Create an old-style archive from a shared archive. |
| old_archive_from_new_cmds=$lt_old_archive_from_new_cmds |
| |
| # Create a temporary old-style archive to link instead of a shared archive. |
| old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds |
| |
| # Commands used to build and install a shared archive. |
| archive_cmds=$lt_archive_cmds |
| archive_expsym_cmds=$lt_archive_expsym_cmds |
| postinstall_cmds=$lt_postinstall_cmds |
| postuninstall_cmds=$lt_postuninstall_cmds |
| |
| # Commands to strip libraries. |
| old_striplib=$lt_old_striplib |
| striplib=$lt_striplib |
| |
| # Method to check whether dependent libraries are shared objects. |
| deplibs_check_method=$lt_deplibs_check_method |
| |
| # Command to use when deplibs_check_method == file_magic. |
| file_magic_cmd=$lt_file_magic_cmd |
| |
| # Flag that allows shared libraries with undefined symbols to be built. |
| allow_undefined_flag=$lt_allow_undefined_flag |
| |
| # Flag that forces no undefined symbols. |
| no_undefined_flag=$lt_no_undefined_flag |
| |
| # Commands used to finish a libtool library installation in a directory. |
| finish_cmds=$lt_finish_cmds |
| |
| # Same as above, but a single script fragment to be evaled but not shown. |
| finish_eval=$lt_finish_eval |
| |
| # Take the output of nm and produce a listing of raw symbols and C names. |
| global_symbol_pipe=$lt_global_symbol_pipe |
| |
| # Transform the output of nm in a proper C declaration |
| global_symbol_to_cdecl=$lt_global_symbol_to_cdecl |
| |
| # Transform the output of nm in a C name address pair |
| global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address |
| |
| # This is the shared library runtime path variable. |
| runpath_var=$runpath_var |
| |
| # This is the shared library path variable. |
| shlibpath_var=$shlibpath_var |
| |
| # Is shlibpath searched before the hard-coded library search path? |
| shlibpath_overrides_runpath=$shlibpath_overrides_runpath |
| |
| # How to hardcode a shared library path into an executable. |
| hardcode_action=$hardcode_action |
| |
| # Whether we should hardcode library paths into libraries. |
| hardcode_into_libs=$hardcode_into_libs |
| |
| # Flag to hardcode \$libdir into a binary during linking. |
| # This must work even if \$libdir does not exist. |
| hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec |
| |
| # Whether we need a single -rpath flag with a separated argument. |
| hardcode_libdir_separator=$lt_hardcode_libdir_separator |
| |
| # Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the |
| # resulting binary. |
| hardcode_direct=$hardcode_direct |
| |
| # Set to yes if using the -LDIR flag during linking hardcodes DIR into the |
| # resulting binary. |
| hardcode_minus_L=$hardcode_minus_L |
| |
| # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into |
| # the resulting binary. |
| hardcode_shlibpath_var=$hardcode_shlibpath_var |
| |
| # Variables whose values should be saved in libtool wrapper scripts and |
| # restored at relink time. |
| variables_saved_for_relink="$variables_saved_for_relink" |
| |
| # Whether libtool must link a program against all its dependency libraries. |
| link_all_deplibs=$link_all_deplibs |
| |
| # Compile-time system search path for libraries |
| sys_lib_search_path_spec=$lt_sys_lib_search_path_spec |
| |
| # Run-time system search path for libraries |
| sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec |
| |
| # Fix the shell variable \$srcfile for the compiler. |
| fix_srcfile_path="$fix_srcfile_path" |
| |
| # Set to yes if exported symbols are required. |
| always_export_symbols=$always_export_symbols |
| |
| # The commands to list exported symbols. |
| export_symbols_cmds=$lt_export_symbols_cmds |
| |
| # The commands to extract the exported symbol list from a shared archive. |
| extract_expsyms_cmds=$lt_extract_expsyms_cmds |
| |
| # Symbols that should not be listed in the preloaded symbols. |
| exclude_expsyms=$lt_exclude_expsyms |
| |
| # Symbols that must always be exported. |
| include_expsyms=$lt_include_expsyms |
| |
| # ### END LIBTOOL CONFIG |
| |
| __EOF__ |
| |
| case $host_os in |
| aix3*) |
| cat <<\EOF >> "${ofile}T" |
| |
| # AIX sometimes has problems with the GCC collect2 program. For some |
| # reason, if we set the COLLECT_NAMES environment variable, the problems |
| # vanish in a puff of smoke. |
| if test "X${COLLECT_NAMES+set}" != Xset; then |
| COLLECT_NAMES= |
| export COLLECT_NAMES |
| fi |
| EOF |
| ;; |
| esac |
| |
| case $host_os in |
| cygwin* | mingw* | pw32* | os2*) |
| cat <<'EOF' >> "${ofile}T" |
| # This is a source program that is used to create dlls on Windows |
| # Don't remove nor modify the starting and closing comments |
| # /* ltdll.c starts here */ |
| # #define WIN32_LEAN_AND_MEAN |
| # #include <windows.h> |
| # #undef WIN32_LEAN_AND_MEAN |
| # #include <stdio.h> |
| # |
| # #ifndef __CYGWIN__ |
| # # ifdef __CYGWIN32__ |
| # # define __CYGWIN__ __CYGWIN32__ |
| # # endif |
| # #endif |
| # |
| # #ifdef __cplusplus |
| # extern "C" { |
| # #endif |
| # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); |
| # #ifdef __cplusplus |
| # } |
| # #endif |
| # |
| # #ifdef __CYGWIN__ |
| # #include <cygwin/cygwin_dll.h> |
| # DECLARE_CYGWIN_DLL( DllMain ); |
| # #endif |
| # HINSTANCE __hDllInstance_base; |
| # |
| # BOOL APIENTRY |
| # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) |
| # { |
| # __hDllInstance_base = hInst; |
| # return TRUE; |
| # } |
| # /* ltdll.c ends here */ |
| # This is a source program that is used to create import libraries |
| # on Windows for dlls which lack them. Don't remove nor modify the |
| # starting and closing comments |
| # /* impgen.c starts here */ |
| # /* Copyright (C) 1999-2000 Free Software Foundation, Inc. |
| # |
| # This file is part of GNU libtool. |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| # */ |
| # |
| # #include <stdio.h> /* for printf() */ |
| # #include <unistd.h> /* for open(), lseek(), read() */ |
| # #include <fcntl.h> /* for O_RDONLY, O_BINARY */ |
| # #include <string.h> /* for strdup() */ |
| # |
| # /* O_BINARY isn't required (or even defined sometimes) under Unix */ |
| # #ifndef O_BINARY |
| # #define O_BINARY 0 |
| # #endif |
| # |
| # static unsigned int |
| # pe_get16 (fd, offset) |
| # int fd; |
| # int offset; |
| # { |
| # unsigned char b[2]; |
| # lseek (fd, offset, SEEK_SET); |
| # read (fd, b, 2); |
| # return b[0] + (b[1]<<8); |
| # } |
| # |
| # static unsigned int |
| # pe_get32 (fd, offset) |
| # int fd; |
| # int offset; |
| # { |
| # unsigned char b[4]; |
| # lseek (fd, offset, SEEK_SET); |
| # read (fd, b, 4); |
| # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); |
| # } |
| # |
| # static unsigned int |
| # pe_as32 (ptr) |
| # void *ptr; |
| # { |
| # unsigned char *b = ptr; |
| # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); |
| # } |
| # |
| # int |
| # main (argc, argv) |
| # int argc; |
| # char *argv[]; |
| # { |
| # int dll; |
| # unsigned long pe_header_offset, opthdr_ofs, num_entries, i; |
| # unsigned long export_rva, export_size, nsections, secptr, expptr; |
| # unsigned long name_rvas, nexp; |
| # unsigned char *expdata, *erva; |
| # char *filename, *dll_name; |
| # |
| # filename = argv[1]; |
| # |
| # dll = open(filename, O_RDONLY|O_BINARY); |
| # if (dll < 1) |
| # return 1; |
| # |
| # dll_name = filename; |
| # |
| # for (i=0; filename[i]; i++) |
| # if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') |
| # dll_name = filename + i +1; |
| # |
| # pe_header_offset = pe_get32 (dll, 0x3c); |
| # opthdr_ofs = pe_header_offset + 4 + 20; |
| # num_entries = pe_get32 (dll, opthdr_ofs + 92); |
| # |
| # if (num_entries < 1) /* no exports */ |
| # return 1; |
| # |
| # export_rva = pe_get32 (dll, opthdr_ofs + 96); |
| # export_size = pe_get32 (dll, opthdr_ofs + 100); |
| # nsections = pe_get16 (dll, pe_header_offset + 4 +2); |
| # secptr = (pe_header_offset + 4 + 20 + |
| # pe_get16 (dll, pe_header_offset + 4 + 16)); |
| # |
| # expptr = 0; |
| # for (i = 0; i < nsections; i++) |
| # { |
| # char sname[8]; |
| # unsigned long secptr1 = secptr + 40 * i; |
| # unsigned long vaddr = pe_get32 (dll, secptr1 + 12); |
| # unsigned long vsize = pe_get32 (dll, secptr1 + 16); |
| # unsigned long fptr = pe_get32 (dll, secptr1 + 20); |
| # lseek(dll, secptr1, SEEK_SET); |
| # read(dll, sname, 8); |
| # if (vaddr <= export_rva && vaddr+vsize > export_rva) |
| # { |
| # expptr = fptr + (export_rva - vaddr); |
| # if (export_rva + export_size > vaddr + vsize) |
| # export_size = vsize - (export_rva - vaddr); |
| # break; |
| # } |
| # } |
| # |
| # expdata = (unsigned char*)malloc(export_size); |
| # lseek (dll, expptr, SEEK_SET); |
| # read (dll, expdata, export_size); |
| # erva = expdata - export_rva; |
| # |
| # nexp = pe_as32 (expdata+24); |
| # name_rvas = pe_as32 (expdata+32); |
| # |
| # printf ("EXPORTS\n"); |
| # for (i = 0; i<nexp; i++) |
| # { |
| # unsigned long name_rva = pe_as32 (erva+name_rvas+i*4); |
| # printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i); |
| # } |
| # |
| # return 0; |
| # } |
| # /* impgen.c ends here */ |
| |
| EOF |
| ;; |
| esac |
| |
| # We use sed instead of cat because bash on DJGPP gets confused if |
| # if finds mixed CR/LF and LF-only lines. Since sed operates in |
| # text mode, it properly converts lines to CR/LF. This bash problem |
| # is reportedly fixed, but why not run on old versions too? |
| sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1) |
| |
| mv -f "${ofile}T" "$ofile" || \ |
| (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") |
| chmod +x "$ofile" |
| fi |
| |
| ])# _LT_AC_LTCONFIG_HACK |
| |
| # AC_LIBTOOL_DLOPEN - enable checks for dlopen support |
| AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) |
| |
| # AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's |
| AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) |
| |
| # AC_ENABLE_SHARED - implement the --enable-shared flag |
| # Usage: AC_ENABLE_SHARED[(DEFAULT)] |
| # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to |
| # `yes'. |
| AC_DEFUN([AC_ENABLE_SHARED], |
| [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl |
| AC_ARG_ENABLE(shared, |
| changequote(<<, >>)dnl |
| << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], |
| changequote([, ])dnl |
| [p=${PACKAGE-default} |
| case $enableval in |
| yes) enable_shared=yes ;; |
| no) enable_shared=no ;; |
| *) |
| enable_shared=no |
| # Look at the argument we got. We use all the common list separators. |
| IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," |
| for pkg in $enableval; do |
| if test "X$pkg" = "X$p"; then |
| enable_shared=yes |
| fi |
| done |
| IFS="$ac_save_ifs" |
| ;; |
| esac], |
| enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl |
| ]) |
| |
| # AC_DISABLE_SHARED - set the default shared flag to --disable-shared |
| AC_DEFUN([AC_DISABLE_SHARED], |
| [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl |
| AC_ENABLE_SHARED(no)]) |
| |
| # AC_ENABLE_STATIC - implement the --enable-static flag |
| # Usage: AC_ENABLE_STATIC[(DEFAULT)] |
| # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to |
| # `yes'. |
| AC_DEFUN([AC_ENABLE_STATIC], |
| [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl |
| AC_ARG_ENABLE(static, |
| changequote(<<, >>)dnl |
| << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], |
| changequote([, ])dnl |
| [p=${PACKAGE-default} |
| case $enableval in |
| yes) enable_static=yes ;; |
| no) enable_static=no ;; |
| *) |
| enable_static=no |
| # Look at the argument we got. We use all the common list separators. |
| IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," |
| for pkg in $enableval; do |
| if test "X$pkg" = "X$p"; then |
| enable_static=yes |
| fi |
| done |
| IFS="$ac_save_ifs" |
| ;; |
| esac], |
| enable_static=AC_ENABLE_STATIC_DEFAULT)dnl |
| ]) |
| |
| # AC_DISABLE_STATIC - set the default static flag to --disable-static |
| AC_DEFUN([AC_DISABLE_STATIC], |
| [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl |
| AC_ENABLE_STATIC(no)]) |
| |
| |
| # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag |
| # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] |
| # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to |
| # `yes'. |
| AC_DEFUN([AC_ENABLE_FAST_INSTALL], |
| [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl |
| AC_ARG_ENABLE(fast-install, |
| changequote(<<, >>)dnl |
| << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], |
| changequote([, ])dnl |
| [p=${PACKAGE-default} |
| case $enableval in |
| yes) enable_fast_install=yes ;; |
| no) enable_fast_install=no ;; |
| *) |
| enable_fast_install=no |
| # Look at the argument we got. We use all the common list separators. |
| IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," |
| for pkg in $enableval; do |
| if test "X$pkg" = "X$p"; then |
| enable_fast_install=yes |
| fi |
| done |
| IFS="$ac_save_ifs" |
| ;; |
| esac], |
| enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl |
| ]) |
| |
| # AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install |
| AC_DEFUN([AC_DISABLE_FAST_INSTALL], |
| [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl |
| AC_ENABLE_FAST_INSTALL(no)]) |
| |
| # AC_LIBTOOL_PICMODE - implement the --with-pic flag |
| # Usage: AC_LIBTOOL_PICMODE[(MODE)] |
| # Where MODE is either `yes' or `no'. If omitted, it defaults to |
| # `both'. |
| AC_DEFUN([AC_LIBTOOL_PICMODE], |
| [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl |
| pic_mode=ifelse($#,1,$1,default)]) |
| |
| |
| # AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library |
| AC_DEFUN([AC_PATH_TOOL_PREFIX], |
| [AC_MSG_CHECKING([for $1]) |
| AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, |
| [case $MAGIC_CMD in |
| /*) |
| lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. |
| ;; |
| ?:/*) |
| lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. |
| ;; |
| *) |
| ac_save_MAGIC_CMD="$MAGIC_CMD" |
| IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" |
| dnl $ac_dummy forces splitting on constant user-supplied paths. |
| dnl POSIX.2 word splitting is done only on the output of word expansions, |
| dnl not every word. This closes a longstanding sh security hole. |
| ac_dummy="ifelse([$2], , $PATH, [$2])" |
| for ac_dir in $ac_dummy; do |
| test -z "$ac_dir" && ac_dir=. |
| if test -f $ac_dir/$1; then |
| lt_cv_path_MAGIC_CMD="$ac_dir/$1" |
| if test -n "$file_magic_test_file"; then |
| case $deplibs_check_method in |
| "file_magic "*) |
| file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" |
| MAGIC_CMD="$lt_cv_path_MAGIC_CMD" |
| if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | |
| egrep "$file_magic_regex" > /dev/null; then |
| : |
| else |
| cat <<EOF 1>&2 |
| |
| *** Warning: the command libtool uses to detect shared libraries, |
| *** $file_magic_cmd, produces output that libtool cannot recognize. |
| *** The result is that libtool may fail to recognize shared libraries |
| *** as such. This will affect the creation of libtool libraries that |
| *** depend on shared libraries, but programs linked with such libtool |
| *** libraries will work regardless of this problem. Nevertheless, you |
| *** may want to report the problem to your system manager and/or to |
| *** bug-libtool@gnu.org |
| |
| EOF |
| fi ;; |
| esac |
| fi |
| break |
| fi |
| done |
| IFS="$ac_save_ifs" |
| MAGIC_CMD="$ac_save_MAGIC_CMD" |
| ;; |
| esac]) |
| MAGIC_CMD="$lt_cv_path_MAGIC_CMD" |
| if test -n "$MAGIC_CMD"; then |
| AC_MSG_RESULT($MAGIC_CMD) |
| else |
| AC_MSG_RESULT(no) |
| fi |
| ]) |
| |
| |
| # AC_PATH_MAGIC - find a file program which can recognise a shared library |
| AC_DEFUN([AC_PATH_MAGIC], |
| [AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl |
| AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) |
| if test -z "$lt_cv_path_MAGIC_CMD"; then |
| if test -n "$ac_tool_prefix"; then |
| AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) |
| else |
| MAGIC_CMD=: |
| fi |
| fi |
| ]) |
| |
| |
| # AC_PROG_LD - find the path to the GNU or non-GNU linker |
| AC_DEFUN([AC_PROG_LD], |
| [AC_ARG_WITH(gnu-ld, |
| [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], |
| test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) |
| AC_REQUIRE([AC_PROG_CC])dnl |
| AC_REQUIRE([AC_CANONICAL_HOST])dnl |
| AC_REQUIRE([AC_CANONICAL_BUILD])dnl |
| AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl |
| ac_prog=ld |
| if test "$GCC" = yes; then |
| # Check if gcc -print-prog-name=ld gives a path. |
| AC_MSG_CHECKING([for ld used by GCC]) |
| case $host in |
| *-*-mingw*) |
| # gcc leaves a trailing carriage return which upsets mingw |
| ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; |
| *) |
| ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; |
| esac |
| case $ac_prog in |
| # Accept absolute paths. |
| [[\\/]]* | [[A-Za-z]]:[[\\/]]*) |
| re_direlt='/[[^/]][[^/]]*/\.\./' |
| # Canonicalize the path of ld |
| ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` |
| while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do |
| ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` |
| done |
| test -z "$LD" && LD="$ac_prog" |
| ;; |
| "") |
| # If it fails, then pretend we aren't using GCC. |
| ac_prog=ld |
| ;; |
| *) |
| # If it is relative, then search for the first ld in PATH. |
| with_gnu_ld=unknown |
| ;; |
| esac |
| elif test "$with_gnu_ld" = yes; then |
| AC_MSG_CHECKING([for GNU ld]) |
| else |
| AC_MSG_CHECKING([for non-GNU ld]) |
| fi |
| AC_CACHE_VAL(lt_cv_path_LD, |
| [if test -z "$LD"; then |
| IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR |
| for ac_dir in $PATH; do |
| test -z "$ac_dir" && ac_dir=. |
| if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then |
| lt_cv_path_LD="$ac_dir/$ac_prog" |
| # Check to see if the program is GNU ld. I'd rather use --version, |
| # but apparently some GNU ld's only accept -v. |
| # Break only if it was the GNU/non-GNU ld that we prefer. |
| if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then |
| test "$with_gnu_ld" != no && break |
| else |
| test "$with_gnu_ld" != yes && break |
| fi |
| fi |
| done |
| IFS="$ac_save_ifs" |
| else |
| lt_cv_path_LD="$LD" # Let the user override the test with a path. |
| fi]) |
| LD="$lt_cv_path_LD" |
| if test -n "$LD"; then |
| AC_MSG_RESULT($LD) |
| else |
| AC_MSG_RESULT(no) |
| fi |
| test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) |
| AC_PROG_LD_GNU |
| ]) |
| |
| # AC_PROG_LD_GNU - |
| AC_DEFUN([AC_PROG_LD_GNU], |
| [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, |
| [# I'd rather use --version here, but apparently some GNU ld's only accept -v. |
| if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then |
| lt_cv_prog_gnu_ld=yes |
| else |
| lt_cv_prog_gnu_ld=no |
| fi]) |
| with_gnu_ld=$lt_cv_prog_gnu_ld |
| ]) |
| |
| # AC_PROG_LD_RELOAD_FLAG - find reload flag for linker |
| # -- PORTME Some linkers may need a different reload flag. |
| AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], |
| [AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, |
| [lt_cv_ld_reload_flag='-r']) |
| reload_flag=$lt_cv_ld_reload_flag |
| test -n "$reload_flag" && reload_flag=" $reload_flag" |
| ]) |
| |
| # AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies |
| # -- PORTME fill in with the dynamic library characteristics |
| AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], |
| [AC_CACHE_CHECK([how to recognise dependent libraries], |
| lt_cv_deplibs_check_method, |
| [lt_cv_file_magic_cmd='$MAGIC_CMD' |
| lt_cv_file_magic_test_file= |
| lt_cv_deplibs_check_method='unknown' |
| # Need to set the preceding variable on all platforms that support |
| # interlibrary dependencies. |
| # 'none' -- dependencies not supported. |
| # `unknown' -- same as none, but documents that we really don't know. |
| # 'pass_all' -- all dependencies passed with no checks. |
| # 'test_compile' -- check by making test program. |
| # 'file_magic [[regex]]' -- check by looking for files in library path |
| # which responds to the $file_magic_cmd with a given egrep regex. |
| # If you have `file' or equivalent on your system and you're not sure |
| # whether `pass_all' will *always* work, you probably want this one. |
| |
| case $host_os in |
| aix4* | aix5*) |
| lt_cv_deplibs_check_method=pass_all |
| ;; |
| |
| beos*) |
| lt_cv_deplibs_check_method=pass_all |
| ;; |
| |
| bsdi4*) |
| lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' |
| lt_cv_file_magic_cmd='/usr/bin/file -L' |
| lt_cv_file_magic_test_file=/shlib/libc.so |
| ;; |
| |
| cygwin* | mingw* | pw32*) |
| lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' |
| lt_cv_file_magic_cmd='$OBJDUMP -f' |
| ;; |
| |
| darwin* | rhapsody*) |
| lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' |
| lt_cv_file_magic_cmd='/usr/bin/file -L' |
| case "$host_os" in |
| rhapsody* | darwin1.[[012]]) |
| lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` |
| ;; |
| *) # Darwin 1.3 on |
| lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' |
| ;; |
| esac |
| ;; |
| |
| freebsd*) |
| if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then |
| case $host_cpu in |
| i*86 ) |
| # Not sure whether the presence of OpenBSD here was a mistake. |
| # Let's accept both of them until this is cleared up. |
| lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' |
| lt_cv_file_magic_cmd=/usr/bin/file |
| lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` |
| ;; |
| esac |
| else |
| lt_cv_deplibs_check_method=pass_all |
| fi |
| ;; |
| |
| gnu*) |
| lt_cv_deplibs_check_method=pass_all |
| ;; |
| |
| hpux10.20*|hpux11*) |
| lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' |
| lt_cv_file_magic_cmd=/usr/bin/file |
| lt_cv_file_magic_test_file=/usr/lib/libc.sl |
| ;; |
| |
| irix5* | irix6* | nonstopux*) |
| case $host_os in |
| irix5* | nonstopux*) |
| # this will be overridden with pass_all, but let us keep it just in case |
| lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" |
| ;; |
| *) |
| case $LD in |
| *-32|*"-32 ") libmagic=32-bit;; |
| *-n32|*"-n32 ") libmagic=N32;; |
| *-64|*"-64 ") libmagic=64-bit;; |
| *) libmagic=never-match;; |
| esac |
| # this will be overridden with pass_all, but let us keep it just in case |
| lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" |
| ;; |
| esac |
| lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` |
| lt_cv_deplibs_check_method=pass_all |
| ;; |
| |
| # This must be Linux ELF. |
| linux-gnu*) |
| case $host_cpu in |
| alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64*) |
| lt_cv_deplibs_check_method=pass_all ;; |
| *) |
| # glibc up to 2.1.1 does not perform some relocations on ARM |
| lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; |
| esac |
| lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` |
| ;; |
| |
| netbsd*) |
| if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then |
| lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' |
| else |
| lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' |
| fi |
| ;; |
| |
| newos6*) |
| lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' |
| lt_cv_file_magic_cmd=/usr/bin/file |
| lt_cv_file_magic_test_file=/usr/lib/libnls.so |
| ;; |
| |
| openbsd*) |
| lt_cv_file_magic_cmd=/usr/bin/file |
| lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` |
| if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then |
| lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' |
| else |
| lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' |
| fi |
| ;; |
| |
| osf3* | osf4* | osf5*) |
| # this will be overridden with pass_all, but let us keep it just in case |
| lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' |
| lt_cv_file_magic_test_file=/shlib/libc.so |
| lt_cv_deplibs_check_method=pass_all |
| ;; |
| |
| sco3.2v5*) |
| lt_cv_deplibs_check_method=pass_all |
| ;; |
| |
| solaris*) |
| lt_cv_deplibs_check_method=pass_all |
| lt_cv_file_magic_test_file=/lib/libc.so |
| ;; |
| |
| sysv5uw[[78]]* | sysv4*uw2*) |
| lt_cv_deplibs_check_method=pass_all |
| ;; |
| |
| sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) |
| case $host_vendor in |
| motorola) |
| lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' |
| lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` |
| ;; |
| ncr) |
| lt_cv_deplibs_check_method=pass_all |
| ;; |
| sequent) |
| lt_cv_file_magic_cmd='/bin/file' |
| lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' |
| ;; |
| sni) |
| lt_cv_file_magic_cmd='/bin/file' |
| lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" |
| lt_cv_file_magic_test_file=/lib/libc.so |
| ;; |
| siemens) |
| lt_cv_deplibs_check_method=pass_all |
| ;; |
| esac |
| ;; |
| esac |
| ]) |
| file_magic_cmd=$lt_cv_file_magic_cmd |
| deplibs_check_method=$lt_cv_deplibs_check_method |
| ]) |
| |
| |
| # AC_PROG_NM - find the path to a BSD-compatible name lister |
| AC_DEFUN([AC_PROG_NM], |
| [AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl |
| AC_MSG_CHECKING([for BSD-compatible nm]) |
| AC_CACHE_VAL(lt_cv_path_NM, |
| [if test -n "$NM"; then |
| # Let the user override the test. |
| lt_cv_path_NM="$NM" |
| else |
| IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR |
| for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do |
| test -z "$ac_dir" && ac_dir=. |
| tmp_nm=$ac_dir/${ac_tool_prefix}nm |
| if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then |
| # Check to see if the nm accepts a BSD-compat flag. |
| # Adding the `sed 1q' prevents false positives on HP-UX, which says: |
| # nm: unknown option "B" ignored |
| # Tru64's nm complains that /dev/null is an invalid object file |
| if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then |
| lt_cv_path_NM="$tmp_nm -B" |
| break |
| elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then |
| lt_cv_path_NM="$tmp_nm -p" |
| break |
| else |
| lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but |
| continue # so that we can try to find one that supports BSD flags |
| fi |
| fi |
| done |
| IFS="$ac_save_ifs" |
| test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm |
| fi]) |
| NM="$lt_cv_path_NM" |
| AC_MSG_RESULT([$NM]) |
| ]) |
| |
| # AC_CHECK_LIBM - check for math library |
| AC_DEFUN([AC_CHECK_LIBM], |
| [AC_REQUIRE([AC_CANONICAL_HOST])dnl |
| LIBM= |
| case $host in |
| *-*-beos* | *-*-cygwin* | *-*-pw32*) |
| # These system don't have libm |
| ;; |
| *-ncr-sysv4.3*) |
| AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") |
| AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") |
| ;; |
| *) |
| AC_CHECK_LIB(m, main, LIBM="-lm") |
| ;; |
| esac |
| ]) |
| |
| # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for |
| # the libltdl convenience library and LTDLINCL to the include flags for |
| # the libltdl header and adds --enable-ltdl-convenience to the |
| # configure arguments. Note that LIBLTDL and LTDLINCL are not |
| # AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not |
| # provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed |
| # with '${top_builddir}/' and LTDLINCL will be prefixed with |
| # '${top_srcdir}/' (note the single quotes!). If your package is not |
| # flat and you're not using automake, define top_builddir and |
| # top_srcdir appropriately in the Makefiles. |
| AC_DEFUN([AC_LIBLTDL_CONVENIENCE], |
| [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl |
| case $enable_ltdl_convenience in |
| no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; |
| "") enable_ltdl_convenience=yes |
| ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; |
| esac |
| LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la |
| LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) |
| # For backwards non-gettext consistent compatibility... |
| INCLTDL="$LTDLINCL" |
| ]) |
| |
| # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for |
| # the libltdl installable library and LTDLINCL to the include flags for |
| # the libltdl header and adds --enable-ltdl-install to the configure |
| # arguments. Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is |
| # AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed |
| # libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will |
| # be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed |
| # with '${top_srcdir}/' (note the single quotes!). If your package is |
| # not flat and you're not using automake, define top_builddir and |
| # top_srcdir appropriately in the Makefiles. |
| # In the future, this macro may have to be called after AC_PROG_LIBTOOL. |
| AC_DEFUN([AC_LIBLTDL_INSTALLABLE], |
| [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl |
| AC_CHECK_LIB(ltdl, main, |
| [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], |
| [if test x"$enable_ltdl_install" = xno; then |
| AC_MSG_WARN([libltdl not installed, but installation disabled]) |
| else |
| enable_ltdl_install=yes |
| fi |
| ]) |
| if test x"$enable_ltdl_install" = x"yes"; then |
| ac_configure_args="$ac_configure_args --enable-ltdl-install" |
| LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la |
| LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) |
| else |
| ac_configure_args="$ac_configure_args --enable-ltdl-install=no" |
| LIBLTDL="-lltdl" |
| LTDLINCL= |
| fi |
| # For backwards non-gettext consistent compatibility... |
| INCLTDL="$LTDLINCL" |
| ]) |
| |
| # old names |
| AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) |
| AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) |
| AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) |
| AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) |
| AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) |
| AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) |
| AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) |
| |
| # This is just to silence aclocal about the macro not being used |
| ifelse([AC_DISABLE_FAST_INSTALL]) |
| |
| # NOTE: This macro has been submitted for inclusion into # |
| # GNU Autoconf as AC_PROG_SED. When it is available in # |
| # a released version of Autoconf we should remove this # |
| # macro and use it instead. # |
| # LT_AC_PROG_SED |
| # -------------- |
| # Check for a fully-functional sed program, that truncates |
| # as few characters as possible. Prefer GNU sed if found. |
| AC_DEFUN([LT_AC_PROG_SED], |
| [AC_MSG_CHECKING([for a sed that does not truncate output]) |
| AC_CACHE_VAL(lt_cv_path_SED, |
| [# Loop through the user's path and test for sed and gsed. |
| # Then use that list of sed's as ones to test for truncation. |
| as_executable_p="test -f" |
| as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| for as_dir in $PATH |
| do |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_prog in sed gsed; do |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then |
| _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext" |
| fi |
| done |
| done |
| done |
| |
| # Create a temporary directory, and hook for its removal unless debugging. |
| $debug || |
| { |
| trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 |
| trap '{ (exit 1); exit 1; }' 1 2 13 15 |
| } |
| |
| # Create a (secure) tmp directory for tmp files. |
| : ${TMPDIR=/tmp} |
| { |
| tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` && |
| test -n "$tmp" && test -d "$tmp" |
| } || |
| { |
| tmp=$TMPDIR/sed$$-$RANDOM |
| (umask 077 && mkdir $tmp) |
| } || |
| { |
| echo "$me: cannot create a temporary directory in $TMPDIR" >&2 |
| { (exit 1); exit 1; } |
| } |
| _max=0 |
| _count=0 |
| # Add /usr/xpg4/bin/sed as it is typically found on Solaris |
| # along with /bin/sed that truncates output. |
| for _sed in $_sed_list /usr/xpg4/bin/sed; do |
| test ! -f ${_sed} && break |
| cat /dev/null > "$tmp/sed.in" |
| _count=0 |
| echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in" |
| # Check for GNU sed and select it if it is found. |
| if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then |
| lt_cv_path_SED=${_sed} |
| break |
| fi |
| while true; do |
| cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp" |
| mv "$tmp/sed.tmp" "$tmp/sed.in" |
| cp "$tmp/sed.in" "$tmp/sed.nl" |
| echo >>"$tmp/sed.nl" |
| ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break |
| cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break |
| # 40000 chars as input seems more than enough |
| test $_count -gt 10 && break |
| _count=`expr $_count + 1` |
| if test $_count -gt $_max; then |
| _max=$_count |
| lt_cv_path_SED=$_sed |
| fi |
| done |
| done |
| rm -rf "$tmp" |
| ]) |
| if test "X$SED" != "X"; then |
| lt_cv_path_SED=$SED |
| else |
| SED=$lt_cv_path_SED |
| fi |
| AC_MSG_RESULT([$SED]) |
| ]) |
| |