| /* config.h.in. Generated automatically from configure.in by autoheader. */ |
| /* config.h: a general config file */ |
| |
| /* don't change these values! */ |
| #define SNMPV1 0xAAAA /* readable by anyone */ |
| #define SNMPV2ANY 0xA000 /* V2 Any type (includes NoAuth) */ |
| #define SNMPV2AUTH 0x8000 /* V2 Authenticated requests only */ |
| |
| /* default list of mibs to load */ |
| |
| #define DEFAULT_MIBS "IP-MIB:IF-MIB:TCP-MIB:UDP-MIB:SNMPv2-MIB:RFC1213-MIB" |
| |
| /* default location to look for mibs to load using the above tokens |
| and/or those in the MIBS envrionment variable*/ |
| |
| #undef DEFAULT_MIBDIRS |
| |
| /* default mib files to load, specified by path. */ |
| |
| #undef DEFAULT_MIBFILES |
| |
| |
| /* Define if on AIX 3. |
| System headers sometimes define this. |
| We just want to avoid a redefinition error message. */ |
| #ifndef _ALL_SOURCE |
| #undef _ALL_SOURCE |
| #endif |
| |
| /* Define if using alloca.c. */ |
| #undef C_ALLOCA |
| |
| /* Define if the closedir function returns void instead of int. */ |
| #undef CLOSEDIR_VOID |
| |
| /* Define to empty if the keyword does not work. */ |
| #undef const |
| |
| /* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems. |
| This function is required for alloca.c support on those systems. */ |
| #undef CRAY_STACKSEG_END |
| |
| /* Define if you have alloca, as a function or macro. */ |
| #undef HAVE_ALLOCA |
| |
| /* Define if you have <alloca.h> and it should be used (not on Ultrix). */ |
| #undef HAVE_ALLOCA_H |
| |
| /* Define if you have the getmntent function. */ |
| #undef HAVE_GETMNTENT |
| |
| /* Define if you have <sys/wait.h> that is POSIX.1 compatible. */ |
| #undef HAVE_SYS_WAIT_H |
| |
| /* Define to `long' if <sys/types.h> doesn't define. */ |
| #undef off_t |
| |
| /* Define to `int' if <sys/types.h> doesn't define. */ |
| #undef pid_t |
| |
| /* Define as the return type of signal handlers (int or void). */ |
| #undef RETSIGTYPE |
| |
| /* If using the C implementation of alloca, define if you know the |
| direction of stack growth for your system; otherwise it will be |
| automatically deduced at run-time. |
| STACK_DIRECTION > 0 => grows toward higher addresses |
| STACK_DIRECTION < 0 => grows toward lower addresses |
| STACK_DIRECTION = 0 => direction of growth unknown |
| */ |
| #undef STACK_DIRECTION |
| |
| /* Define if you have the ANSI C header files. */ |
| #undef STDC_HEADERS |
| |
| /* Define if you can safely include both <sys/time.h> and <time.h>. */ |
| #undef TIME_WITH_SYS_TIME |
| |
| /* Define if the closedir function returns void instead of int. */ |
| #undef VOID_CLOSEDIR |
| |
| /* Define if your processor stores words with the most significant |
| byte first (like Motorola and SPARC, unlike Intel and VAX). */ |
| #undef WORDS_BIGENDIAN |
| |
| /* define the system type include file here */ |
| #define SYSTEM_INCLUDE_FILE "s/generic.h" |
| |
| /* define the machine (cpu) type include file here */ |
| #define MACHINE_INCLUDE_FILE "m/generic.h" |
| |
| #undef SNMPLIBPATH |
| #undef SNMPSHAREPATH |
| |
| /* LOGFILE: If defined it closes stdout/err/in and opens this in out/err's |
| place. (stdin is closed so that sh scripts won't wait for it) */ |
| |
| #undef LOGFILE |
| |
| /* default system contact */ |
| #undef SYS_CONTACT |
| |
| /* system location */ |
| #undef SYS_LOC |
| |
| /* Use libwrap to handle allow/deny hosts? */ |
| #undef USE_LIBWRAP |
| |
| /* location of UNIX kernel */ |
| #define KERNEL_LOC "/vmunix" |
| |
| /* location of mount table list */ |
| #define ETC_MNTTAB "/etc/mnttab" |
| |
| /* location of swap device (ok if not found) */ |
| #undef DMEM_LOC |
| |
| #define PSCMD "/bin/ps" |
| |
| /* Where is the uname command */ |
| #define UNAMEPROG "/bin/uname" |
| |
| /* debugging stuff */ |
| #define DODEBUG 0 |
| |
| /* If you don't have root access don't exit upon kmem errors */ |
| #undef NO_ROOT_ACCESS |
| |
| /* Define if statfs takes 2 args and the second argument has |
| type struct fs_data. [Ultrix] */ |
| #undef STAT_STATFS_FS_DATA |
| |
| /* Define if you have the bcopy function. */ |
| #undef HAVE_BCOPY |
| |
| /* Define if you have the gethostname function. */ |
| #undef HAVE_GETHOSTNAME |
| |
| /* Define if you have the getloadavg function. */ |
| #undef HAVE_GETLOADAVG |
| |
| /* Define if you have the gettimeofday function. */ |
| #undef HAVE_GETTIMEOFDAY |
| |
| /* Define if you have the index function. */ |
| #undef HAVE_INDEX |
| |
| /* Define if you have the kvm_openfiles function. */ |
| #undef HAVE_KVM_OPENFILES |
| |
| /* Define if you have the lrand48 function. */ |
| #undef HAVE_LRAND48 |
| |
| /* Define if you have the memcpy function. */ |
| #undef HAVE_MEMCPY |
| |
| /* Define if you have the memmove function. */ |
| #undef HAVE_MEMMOVE |
| |
| /* Define if you have the nlist function. */ |
| #undef HAVE_NLIST |
| |
| /* Define if you have the rand function. */ |
| #undef HAVE_RAND |
| |
| /* Define if you have the random function. */ |
| #undef HAVE_RANDOM |
| |
| /* Define if you have the select function. */ |
| #undef HAVE_SELECT |
| |
| /* Define if you have the setmntent function. */ |
| #undef HAVE_SETMNTENT |
| |
| /* Define if you have the sigblock function. */ |
| #undef HAVE_SIGBLOCK |
| |
| /* Define if you have the sighold function. */ |
| #undef HAVE_SIGHOLD |
| |
| /* Define if you have the signal function. */ |
| #undef HAVE_SIGNAL |
| |
| /* Define if you have the sigset function. */ |
| #undef HAVE_SIGSET |
| |
| /* Define if you have the socket function. */ |
| #undef HAVE_SOCKET |
| |
| /* Define if you have the statfs function. */ |
| #undef HAVE_STATFS |
| |
| /* Define if you have the statvfs function. */ |
| #undef HAVE_STATVFS |
| |
| /* Define if you have the strchr function. */ |
| #undef HAVE_STRCHR |
| |
| /* Define if you have the strdup function. */ |
| #undef HAVE_STRDUP |
| |
| /* Define if you have the strerror function. */ |
| #undef HAVE_STRERROR |
| |
| /* Define if you have the strtol function. */ |
| #undef HAVE_STRTOL |
| |
| /* Define if you have the uname function. */ |
| #undef HAVE_UNAME |
| |
| /* Define if you have the <arpa/inet.h> header file. */ |
| #undef HAVE_ARPA_INET_H |
| |
| /* Define if you have the <dirent.h> header file. */ |
| #undef HAVE_DIRENT_H |
| |
| /* Define if you have the <err.h> header file. */ |
| #undef HAVE_ERR_H |
| |
| /* Define if you have the <fcntl.h> header file. */ |
| #undef HAVE_FCNTL_H |
| |
| /* Define if you have the <fstab.h> header file. */ |
| #undef HAVE_FSTAB_H |
| |
| /* Define if you have the <getopt.h> header file. */ |
| #undef HAVE_GETOPT_H |
| |
| /* Define if you have the <inet/mib2.h> header file. */ |
| #undef HAVE_INET_MIB2_H |
| |
| /* Define if you have the <io.h> header file. */ |
| #undef HAVE_IO_H |
| |
| /* Define if you have the <ioctls.h> header file. */ |
| #undef HAVE_IOCTLS_H |
| |
| /* Define if you have the <kstat.h> header file. */ |
| #undef HAVE_KSTAT_H |
| |
| /* Define if you have the <kvm.h> header file. */ |
| #undef HAVE_KVM_H |
| |
| /* Define if you have the <limits.h> header file. */ |
| #undef HAVE_LIMITS_H |
| |
| /* Define if you have the <linux/hdreg.h> header file. */ |
| #undef HAVE_LINUX_HDREG_H |
| |
| /* Define if you have the <machine/param.h> header file. */ |
| #undef HAVE_MACHINE_PARAM_H |
| |
| /* Define if you have the <machine/pte.h> header file. */ |
| #undef HAVE_MACHINE_PTE_H |
| |
| /* Define if you have the <malloc.h> header file. */ |
| #undef HAVE_MALLOC_H |
| |
| /* Define if you have the <mntent.h> header file. */ |
| #undef HAVE_MNTENT_H |
| |
| /* Define if you have the <mtab.h> header file. */ |
| #undef HAVE_MTAB_H |
| |
| /* Define if you have the <ndir.h> header file. */ |
| #undef HAVE_NDIR_H |
| |
| /* Define if you have the <net/if_dl.h> header file. */ |
| #undef HAVE_NET_IF_DL_H |
| |
| /* Define if you have the <net/if_mib.h> header file. */ |
| #undef HAVE_NET_IF_MIB_H |
| |
| /* Define if you have the <net/if_types.h> header file. */ |
| #undef HAVE_NET_IF_TYPES_H |
| |
| /* Define if you have the <net/if_var.h> header file. */ |
| #undef HAVE_NET_IF_VAR_H |
| |
| /* Define if you have the <net/route.h> header file. */ |
| #undef HAVE_NET_ROUTE_H |
| |
| /* Define if you have the <netinet/icmp_var.h> header file. */ |
| #undef HAVE_NETINET_ICMP_VAR_H |
| |
| /* Define if you have the <netinet/if_ether.h> header file. */ |
| #undef HAVE_NETINET_IF_ETHER_H |
| |
| /* Define if you have the <netinet/in.h> header file. */ |
| #undef HAVE_NETINET_IN_H |
| |
| /* Define if you have the <netinet/in_pcb.h> header file. */ |
| #undef HAVE_NETINET_IN_PCB_H |
| |
| /* Define if you have the <netinet/in_var.h> header file. */ |
| #undef HAVE_NETINET_IN_VAR_H |
| |
| /* Define if you have the <netinet/ip_var.h> header file. */ |
| #undef HAVE_NETINET_IP_VAR_H |
| |
| /* Define if you have the <netinet/tcp_fsm.h> header file. */ |
| #undef HAVE_NETINET_TCP_FSM_H |
| |
| /* Define if you have the <netinet/tcp_timer.h> header file. */ |
| #undef HAVE_NETINET_TCP_TIMER_H |
| |
| /* Define if you have the <netinet/tcp_var.h> header file. */ |
| #undef HAVE_NETINET_TCP_VAR_H |
| |
| /* Define if you have the <netinet/tcpip.h> header file. */ |
| #undef HAVE_NETINET_TCPIP_H |
| |
| /* Define if you have the <netinet/udp_var.h> header file. */ |
| #undef HAVE_NETINET_UDP_VAR_H |
| |
| /* Define if you have the <nlist.h> header file. */ |
| #undef HAVE_NLIST_H |
| |
| /* Define if you have the <osreldate.h> header file. */ |
| #undef HAVE_OSRELDATE_H |
| |
| /* Define if you have the <sgtty.h> header file. */ |
| #undef HAVE_SGTTY_H |
| |
| /* Define if you have the <stdlib.h> header file. */ |
| #undef HAVE_STDLIB_H |
| |
| /* Define if you have the <string.h> header file. */ |
| #undef HAVE_STRING_H |
| |
| /* Define if you have the <sys/cdefs.h> header file. */ |
| #undef HAVE_SYS_CDEFS_H |
| |
| /* Define if you have the <sys/conf.h> header file. */ |
| #undef HAVE_SYS_CONF_H |
| |
| /* Define if you have the <sys/dir.h> header file. */ |
| #undef HAVE_SYS_DIR_H |
| |
| /* Define if you have the <sys/diskio.h> header file. */ |
| #undef HAVE_SYS_DISKIO_H |
| |
| /* Define if you have the <sys/dkio.h> header file. */ |
| #undef HAVE_SYS_DKIO_H |
| |
| /* Define if you have the <sys/dmap.h> header file. */ |
| #undef HAVE_SYS_DMAP_H |
| |
| /* Define if you have the <sys/file.h> header file. */ |
| #undef HAVE_SYS_FILE_H |
| |
| /* Define if you have the <sys/filio.h> header file. */ |
| #undef HAVE_SYS_FILIO_H |
| |
| /* Define if you have the <sys/fixpoint.h> header file. */ |
| #undef HAVE_SYS_FIXPOINT_H |
| |
| /* Define if you have the <sys/fs.h> header file. */ |
| #undef HAVE_SYS_FS_H |
| |
| /* Define if you have the <sys/hashing.h> header file. */ |
| #undef HAVE_SYS_HASHING_H |
| |
| /* Define if you have the <sys/ioctl.h> header file. */ |
| #undef HAVE_SYS_IOCTL_H |
| |
| /* Define if you have the <sys/mbuf.h> header file. */ |
| #undef HAVE_SYS_MBUF_H |
| |
| /* Define if you have the <sys/mntent.h> header file. */ |
| #undef HAVE_SYS_MNTENT_H |
| |
| /* Define if you have the <sys/mnttab.h> header file. */ |
| #undef HAVE_SYS_MNTTAB_H |
| |
| /* Define if you have the <sys/mount.h> header file. */ |
| #undef HAVE_SYS_MOUNT_H |
| |
| /* Define if you have the <sys/ndir.h> header file. */ |
| #undef HAVE_SYS_NDIR_H |
| |
| /* Define if you have the <sys/param.h> header file. */ |
| #undef HAVE_SYS_PARAM_H |
| |
| /* Define if you have the <sys/proc.h> header file. */ |
| #undef HAVE_SYS_PROC_H |
| |
| /* Define if you have the <sys/protosw.h> header file. */ |
| #undef HAVE_SYS_PROTOSW_H |
| |
| /* Define if you have the <sys/pstat.h> header file. */ |
| #undef HAVE_SYS_PSTAT_H |
| |
| /* Define if you have the <sys/queue.h> header file. */ |
| #undef HAVE_SYS_QUEUE_H |
| |
| /* Define if you have the <sys/select.h> header file. */ |
| #undef HAVE_SYS_SELECT_H |
| |
| /* Define if you have the <sys/sockio.h> header file. */ |
| #undef HAVE_SYS_SOCKIO_H |
| |
| /* Define if you have the <sys/stat.h> header file. */ |
| #undef HAVE_SYS_STAT_H |
| |
| /* Define if you have the <sys/statfs.h> header file. */ |
| #undef HAVE_SYS_STATFS_H |
| |
| /* Define if you have the <sys/statvfs.h> header file. */ |
| #undef HAVE_SYS_STATVFS_H |
| |
| /* Define if you have the <sys/swap.h> header file. */ |
| #undef HAVE_SYS_SWAP_H |
| |
| /* Define if you have the <sys/sysctl.h> header file. */ |
| #undef HAVE_SYS_SYSCTL_H |
| |
| /* Define if you have the <sys/sysmp.h> header file. */ |
| #undef HAVE_SYS_SYSMP_H |
| |
| /* Define if you have the <sys/tcpipstats.h> header file. */ |
| #undef HAVE_SYS_TCPIPSTATS_H |
| |
| /* Define if you have the <sys/time.h> header file. */ |
| #undef HAVE_SYS_TIME_H |
| |
| /* Define if you have the <sys/user.h> header file. */ |
| #undef HAVE_SYS_USER_H |
| |
| /* Define if you have the <sys/utsname.h> header file. */ |
| #undef HAVE_SYS_UTSNAME_H |
| |
| /* Define if you have the <sys/vfs.h> header file. */ |
| #undef HAVE_SYS_VFS_H |
| |
| /* Define if you have the <sys/vm.h> header file. */ |
| #undef HAVE_SYS_VM_H |
| |
| /* Define if you have the <sys/vmmac.h> header file. */ |
| #undef HAVE_SYS_VMMAC_H |
| |
| /* Define if you have the <sys/vmmeter.h> header file. */ |
| #undef HAVE_SYS_VMMETER_H |
| |
| /* Define if you have the <sys/vmparam.h> header file. */ |
| #undef HAVE_SYS_VMPARAM_H |
| |
| /* Define if you have the <sys/vmsystm.h> header file. */ |
| #undef HAVE_SYS_VMSYSTM_H |
| |
| /* Define if you have the <sys/vnode.h> header file. */ |
| #undef HAVE_SYS_VNODE_H |
| |
| /* Define if you have the <syslog.h> header file. */ |
| #undef HAVE_SYSLOG_H |
| |
| /* Define if you have the <ufs/ffs/fs.h> header file. */ |
| #undef HAVE_UFS_FFS_FS_H |
| |
| /* Define if you have the <ufs/fs.h> header file. */ |
| #undef HAVE_UFS_FS_H |
| |
| /* Define if you have the <ufs/ufs/dinode.h> header file. */ |
| #undef HAVE_UFS_UFS_DINODE_H |
| |
| /* Define if you have the <ufs/ufs/inode.h> header file. */ |
| #undef HAVE_UFS_UFS_INODE_H |
| |
| /* Define if you have the <ufs/ufs/quota.h> header file. */ |
| #undef HAVE_UFS_UFS_QUOTA_H |
| |
| /* Define if you have the <unistd.h> header file. */ |
| #undef HAVE_UNISTD_H |
| |
| /* Define if you have the <utsname.h> header file. */ |
| #undef HAVE_UTSNAME_H |
| |
| /* Define if you have the <vm/swap_pager.h> header file. */ |
| #undef HAVE_VM_SWAP_PAGER_H |
| |
| /* Define if you have the <vm/vm.h> header file. */ |
| #undef HAVE_VM_VM_H |
| |
| /* Define if you have the <winsock.h> header file. */ |
| #undef HAVE_WINSOCK_H |
| |
| /* Define if you have the <xti.h> header file. */ |
| #undef HAVE_XTI_H |
| |
| /* Define if you have the elf library (-lelf). */ |
| #undef HAVE_LIBELF |
| |
| /* Define if you have the kstat library (-lkstat). */ |
| #undef HAVE_LIBKSTAT |
| |
| /* Define if you have the kvm library (-lkvm). */ |
| #undef HAVE_LIBKVM |
| |
| /* Define if you have the m library (-lm). */ |
| #undef HAVE_LIBM |
| |
| /* Define if you have the mld library (-lmld). */ |
| #undef HAVE_LIBMLD |
| |
| /* Define if you have the nsl library (-lnsl). */ |
| #undef HAVE_LIBNSL |
| |
| /* Define if you have the rpm library (-lrpm). */ |
| #undef HAVE_LIBRPM |
| |
| /* Define if you have the socket library (-lsocket). */ |
| #undef HAVE_LIBSOCKET |
| |
| /* define if sys/cdefs.h doesn't define the __P() macro */ |
| #undef SYS_CDEFS_DEFINES___P |
| |
| /* define rtentry to ortentry on SYSV machines (alphas) */ |
| #define RTENTRY rtentry; |
| |
| /* Use BSD 4.4 routing table entries? */ |
| #undef RTENTRY_4_4 |
| |
| /* rtentry structure tests */ |
| #undef RTENTRY_RT_NEXT |
| #undef STRUCT_RTENTRY_HAS_RT_DST |
| #undef STRUCT_RTENTRY_HAS_RT_UNIT |
| #undef STRUCT_RTENTRY_HAS_RT_USE |
| #undef STRUCT_RTENTRY_HAS_RT_REFCNT |
| #undef STRUCT_RTENTRY_HAS_RT_HASH |
| |
| /* ifnet structure tests */ |
| #undef STRUCT_IFNET_HAS_IF_BAUDRATE |
| #undef STRUCT_IFNET_HAS_IF_SPEED |
| #undef STRUCT_IFNET_HAS_IF_TYPE |
| #undef STRUCT_IFNET_HAS_IF_IMCASTS |
| #undef STRUCT_IFNET_HAS_IF_IQDROPS |
| #undef STRUCT_IFNET_HAS_IF_LASTCHANGE_TV_SEC |
| #undef STRUCT_IFNET_HAS_IF_NOPROTO |
| #undef STRUCT_IFNET_HAS_IF_OMCASTS |
| #undef STRUCT_IFNET_HAS_IF_XNAME |
| #undef STRUCT_IFNET_HAS_IF_OBYTES |
| #undef STRUCT_IFNET_HAS_IF_IBYTES |
| #undef STRUCT_IFNET_HAS_IF_ADDRLIST |
| |
| /* tcpstat.tcps_rcvmemdrop */ |
| #undef STRUCT_TCPSTAT_HAS_TCPS_RCVMEMDROP |
| |
| /* udpstat.udps_discard */ |
| #undef STRUCT_UDPSTAT_HAS_UDPS_DISCARD |
| |
| /* arphd.at_next */ |
| #undef STRUCT_ARPHD_HAS_AT_NEXT |
| |
| /* ifaddr.ifa_next */ |
| #undef STRUCT_IFADDR_HAS_IFA_NEXT |
| |
| /* ifnet.if_mtu */ |
| #undef STRUCT_IFNET_HAS_IF_MTU |
| |
| /* swdevt.sw_nblksenabled */ |
| #undef STRUCT_SWDEVT_HAS_SW_NBLKSENABLED |
| |
| /* nlist.n_value */ |
| #undef STRUCT_NLIST_HAS_N_VALUE |
| |
| /* vfsstat.f_frsize */ |
| #undef STRUCT_STATVFS_HAS_F_FRSIZE |
| |
| /* ifnet needs to have _KERNEL defined */ |
| #undef IFNET_NEEDS_KERNEL |
| |
| /* sysctl works to get boottime, etc... */ |
| #undef CAN_USE_SYSCTL |
| |
| /* type check for in_addr_t */ |
| #undef in_addr_t |
| |
| /* define if SIOCGIFADDR exists in sys/ioctl.h */ |
| #undef SYS_IOCTL_H_HAS_SIOCGIFADDR |
| |
| /* mib pointer to the top of the extensible tree. This has been |
| assigned to UCDavis by the iana group. Optionally, point this to the |
| location in the tree your company/organization has been allocated. */ |
| |
| /* location of the extensible mib tree */ |
| #define EXTENSIBLEMIB 1,3,6,1,4,1,2021 |
| /* location of the extensible mib tree */ |
| #define EXTENSIBLEDOTMIB 1.3.6.1.4.1.2021 |
| /* count the above numbers */ |
| #define EXTENSIBLENUM 7 |
| |
| /* Mib-2 tree Info */ |
| /* These are the system information variables. */ |
| |
| #define VERS_DESC "unknown" /* overridden at run time */ |
| #define SYS_NAME "unknown" /* overridden at run time */ |
| |
| /* comment out the second define to turn off functionality for any of |
| these: (See README for details) */ |
| |
| /* proc PROCESSNAME [MAX] [MIN] */ |
| #define PROCMIBNUM 2 |
| |
| /* exec/shell NAME COMMAND */ |
| #define SHELLMIBNUM 8 |
| |
| /* swap MIN */ |
| #define MEMMIBNUM 4 |
| |
| /* disk DISK MINSIZE */ |
| #define DISKMIBNUM 9 |
| |
| /* load 1 5 15 */ |
| #define LOADAVEMIBNUM 10 |
| |
| /* which version are you using? This mibloc will tell you */ |
| #define VERSIONMIBNUM 100 |
| |
| /* Reports errors the agent runs into */ |
| /* (typically its "can't fork, no mem" problems) */ |
| #define ERRORMIBNUM 101 |
| |
| /* The sub id of EXENSIBLEMIB returned to queries of |
| .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0 */ |
| #define AGENTID 250 |
| |
| /* This ID is returned after the AGENTID above. IE, the resulting |
| value returned by a query to sysObjectID is |
| EXTENSIBLEMIB.AGENTID.???, where ??? is defined below by OSTYPE */ |
| |
| #define HPUX9ID 1 |
| #define SUNOS4ID 2 |
| #define SOLARISID 3 |
| #define OSFID 4 |
| #define ULTRIXID 5 |
| #define HPUX10ID 6 |
| #define NETBSD1ID 7 |
| #define FREEBSDID 8 |
| #define IRIXID 9 |
| #define LINUXID 10 |
| #define BSDIID 11 |
| #define OPENBSDID 12 |
| #define UNKNOWNID 255 |
| |
| #ifdef hpux9 |
| #define OSTYPE HPUX9ID |
| #endif |
| #ifdef hpux10 |
| #define OSTYPE HPUX10ID |
| #endif |
| #ifdef sunos4 |
| #define OSTYPE SUNOS4ID |
| #endif |
| #ifdef solaris2 |
| #define OSTYPE SOLARISID |
| #endif |
| #if defined(osf3) || defined(osf4) |
| #define OSTYPE OSFID |
| #endif |
| #ifdef ultrix4 |
| #define OSTYPE ULTRIXID |
| #endif |
| #ifdef netbsd1 |
| #define OSTYPE NETBSD1ID |
| #endif |
| #if defined(freebsd2) || defined(freebsd3) |
| #define OSTYPE FREEBSDID |
| #endif |
| #if defined(irix6) || defined(irix5) |
| #define OSTYPE IRIXID |
| #endif |
| #ifdef linux |
| #define OSTYPE LINUXID |
| #endif |
| #if defined(bsdi2) || defined(bsdi3) |
| #define OSTYPE BSDIID |
| #endif |
| #ifdef openbsd2 |
| #define OSTYPE OPENBSDID |
| #endif |
| /* unknown */ |
| #ifndef OSTYPE |
| #define OSTYPE UNKNOWNID |
| #endif |
| |
| /* how long to wait (seconds) for error querys before reseting the error trap.*/ |
| #define ERRORTIMELENGTH 600 |
| |
| /* Exec command to fix PROC problems */ |
| /* %s will be replaced by the process name in error */ |
| |
| #define PROCFIXCMD "/usr/local/bin/perl /local/scripts/fixproc %s" |
| |
| /* Exec command to fix EXEC problems */ |
| /* %s will be replaced by the exec/script name in error */ |
| |
| #define EXECFIXCMD "/usr/local/bin/perl /local/scripts/fixproc %s" |
| |
| /* Should exec output Cashing be used (speeds up things greatly), and |
| if so, After how many seconds should the cache re-newed? Note: |
| Don't define CASHETIME to disable cashing completely */ |
| |
| #define EXCACHETIME 30 |
| #define CACHEFILE "/tmp/.snmp-exec-cache" |
| #define MAXCACHESIZE (200*80) /* roughly 200 lines max */ |
| |
| #define MAXDISKS 50 /* can't scan more than this number */ |
| |
| /* misc defaults */ |
| |
| /* default of 100 meg minimum if the minimum size is not specified in |
| the config file */ |
| #define DEFDISKMINIMUMSPACE 100000 |
| |
| #define DEFMAXLOADAVE 12.0 /* default maximum load average before error */ |
| |
| #define MAXREADCOUNT 20 /* max times to loop reading output from |
| execs. Because of sleep(1)s, this will also |
| be time to wait (in seconds) for exec to finish */ |
| |
| #define SNMPBLOCK 1 /* Set to 1 if you want snmpgets to block and never |
| timeout. Original CMU code had this |
| hardcoded into the code as = 1 */ |
| |
| #define RESTARTSLEEP 5 /* How long to wait after a snmpset to |
| EXTENSIBLEMIB.VERSIONMIBNUM.VERRESTARTAGENT |
| before restarting the agent. This is |
| necessary to finish the snmpset reply |
| before restarting. */ |
| |
| /* Number of community strings to store */ |
| #define NUM_COMMUNITIES 5 |
| |
| /* #define EXIT_ON_BAD_KLREAD */ |
| /* define to exit the agent on a bad kernel read */ |
| |
| #define LASTFIELD -1 /* internal define */ |
| |
| /* debugging macros */ |
| |
| #ifndef HAVE_STRCHR |
| #ifdef HAVE_INDEX |
| # define strchr index |
| # define strrchr rindex |
| #endif |
| #endif |
| |
| #ifndef HAVE_INDEX |
| #ifdef HAVE_STRCHR |
| # define index strchr |
| # define rindex strrchr |
| #endif |
| #endif |
| |
| #ifndef HAVE_MEMCPY |
| #ifdef HAVE_BCOPY |
| # define memcpy(d, s, n) bcopy ((s), (d), (n)) |
| # define memmove(d, s, n) bcopy ((s), (d), (n)) |
| # define memcmp bcmp |
| #endif |
| #endif |
| |
| #ifndef HAVE_MEMMOVE |
| #ifdef HAVE_MEMCPY |
| # define memmove memcpy |
| #endif |
| #endif |
| |
| #ifndef HAVE_BCOPY |
| #ifdef HAVE_MEMCPY |
| # define bcopy(s, d, n) memcpy ((d), (s), (n)) |
| # define bzero(p,n) memset((p),(0),(n)) |
| # define bcmp memcmp |
| #endif |
| #endif |
| |
| |
| /* define random functions */ |
| |
| #ifndef HAVE_RANDOM |
| #ifdef HAVE_LRAND48 |
| #define random lrand48 |
| #define srandom(s) srand48(s) |
| #else |
| #ifdef HAVE_RAND |
| #define random rand |
| #define srandom(s) srand(s) |
| #endif |
| #endif |
| #endif |
| |
| /* define signal if DNE */ |
| |
| #ifndef HAVE_SIGNAL |
| #ifdef HAVE_SIGSET |
| #define signal(a,b) sigset(a,b) |
| #endif |
| #endif |
| |
| /* Watch out for compilers that don't handle void properly. */ |
| #undef void |
| |
| #if defined(HAVE_NLIST) && defined(STRUCT_NLIST_HAS_N_VALUE) && !defined(DONT_USE_NLIST) |
| #define CAN_USE_NLIST |
| #endif |
| |
| /* Not-to-be-compiled macros for use by configure only */ |
| #define config_require(x) |
| #define config_arch_require(x,y) |
| #define config_load_mib(x,y,z) |
| #define config_parse_dot_conf(x,y,z) |
| #define config_add_mib(x) |
| |
| #include <mib_module_config.h> |
| |
| #ifndef SYS_CDEFS_DEFINES___P |
| #ifndef __P |
| #ifdef __STDC__ |
| #define __P(params) params |
| #else |
| #define __P(params) () |
| #endif /* __STDC__ */ |
| #endif /* __P */ |
| #else /* SYS_CDEFS_DEFINES___P */ |
| #ifndef __P |
| #ifdef HAVE_SYS_CDEFS_H |
| #include <sys/cdefs.h> |
| #endif /* HAVE_SYS_CDEFS_H */ |
| #endif /* __P */ |
| #endif /* SYS_CDEFS_DEFINES___P */ |
| |
| #ifdef WIN32 |
| #define ENV_SEPARATOR ";" |
| #define ENV_SEPARATOR_CHAR ';' |
| #else |
| #define ENV_SEPARATOR ":" |
| #define ENV_SEPARATOR_CHAR ':' |
| #define _CRTIMP |
| #endif |
| |
| #include SYSTEM_INCLUDE_FILE |
| #include MACHINE_INCLUDE_FILE |
