| SCTP-MIB DEFINITIONS ::= BEGIN |
| |
| IMPORTS |
| MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Gauge32, |
| Counter32, Counter64, mib-2 |
| FROM SNMPv2-SMI -- [RFC2578] |
| TimeStamp, TruthValue |
| FROM SNMPv2-TC -- [RFC2579] |
| MODULE-COMPLIANCE, OBJECT-GROUP |
| FROM SNMPv2-CONF -- [RFC2580] |
| InetAddressType, InetAddress, InetPortNumber |
| FROM INET-ADDRESS-MIB; -- [RFC3291] |
| |
| sctpMIB MODULE-IDENTITY |
| LAST-UPDATED "200409020000Z" -- 2nd September 2004 |
| ORGANIZATION "IETF SIGTRAN Working Group" |
| CONTACT-INFO |
| " |
| WG EMail: sigtran@ietf.org |
| |
| Web Page: |
| http://www.ietf.org/html.charters/sigtran-charter.html |
| |
| Chair: Lyndon Ong |
| Ciena Corporation |
| 0480 Ridgeview Drive |
| Cupertino, CA 95014 |
| USA |
| Tel: |
| Email: lyong@ciena.com |
| |
| Editors: Maria-Carmen Belinchon |
| R&D Department |
| Ericsson Espana S. A. |
| Via de los Poblados, 13 |
| 28033 Madrid |
| Spain |
| Tel: +34 91 339 3535 |
| Email: Maria.C.Belinchon@ericsson.com |
| |
| Jose-Javier Pastor-Balbas |
| R&D Department |
| Ericsson Espana S. A. |
| Via de los Poblados, 13 |
| 28033 Madrid |
| Spain |
| Tel: +34 91 339 1397 |
| Email: J.Javier.Pastor@ericsson.com |
| " |
| DESCRIPTION |
| "The MIB module for managing SCTP implementations. |
| |
| Copyright (C) The Internet Society (2004). This version of |
| this MIB module is part of RFC 3873; see the RFC itself for |
| full legal notices. " |
| |
| REVISION "200409020000Z" -- 2nd September 2004 |
| DESCRIPTION " Initial version, published as RFC 3873" |
| ::= { mib-2 104 } |
| |
| -- the SCTP base variables group |
| |
| sctpObjects OBJECT IDENTIFIER ::= { sctpMIB 1 } |
| |
| sctpStats OBJECT IDENTIFIER ::= { sctpObjects 1 } |
| sctpParams OBJECT IDENTIFIER ::= { sctpObjects 2 } |
| |
| -- STATISTICS |
| -- ********** |
| |
| -- STATE-RELATED STATISTICS |
| |
| sctpCurrEstab OBJECT-TYPE |
| SYNTAX Gauge32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of associations for which the current state is |
| either ESTABLISHED, SHUTDOWN-RECEIVED or SHUTDOWN-PENDING." |
| REFERENCE |
| "Section 4 in RFC2960 covers the SCTP Association state |
| diagram." |
| ::= { sctpStats 1 } |
| |
| sctpActiveEstabs OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of times that associations have made a direct |
| transition to the ESTABLISHED state from the COOKIE-ECHOED |
| state: COOKIE-ECHOED -> ESTABLISHED. The upper layer initiated |
| the association attempt." |
| REFERENCE |
| "Section 4 in RFC2960 covers the SCTP Association state |
| diagram." |
| ::= { sctpStats 2 } |
| |
| sctpPassiveEstabs OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of times that associations have made a direct |
| transition to the ESTABLISHED state from the CLOSED state: |
| CLOSED -> ESTABLISHED. The remote endpoint initiated the |
| association attempt." |
| REFERENCE |
| "Section 4 in RFC2960 covers the SCTP Association state |
| diagram." |
| ::= { sctpStats 3 } |
| |
| sctpAborteds OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of times that associations have made a direct |
| transition to the CLOSED state from any state using the |
| primitive 'ABORT': AnyState --Abort--> CLOSED. Ungraceful |
| termination of the association." |
| REFERENCE |
| "Section 4 in RFC2960 covers the SCTP Association state |
| diagram." |
| ::= { sctpStats 4 } |
| |
| sctpShutdowns OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of times that associations have made a direct |
| transition to the CLOSED state from either the SHUTDOWN-SENT |
| state or the SHUTDOWN-ACK-SENT state. Graceful termination of |
| the association." |
| REFERENCE |
| "Section 4 in RFC2960 covers the SCTP Association state |
| diagram." |
| ::= { sctpStats 5 } |
| |
| -- OTHER LAYER STATISTICS |
| |
| sctpOutOfBlues OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of out of the blue packets received by the host. |
| An out of the blue packet is an SCTP packet correctly formed, |
| including the proper checksum, but for which the receiver was |
| unable to identify an appropriate association." |
| REFERENCE |
| "Section 8.4 in RFC2960 deals with the Out-Of-The-Blue |
| (OOTB) packet definition and procedures." |
| ::= { sctpStats 6 } |
| |
| sctpChecksumErrors OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of SCTP packets received with an invalid |
| checksum." |
| REFERENCE |
| "The checksum is located at the end of the SCTP packet as per |
| Section 3.1 in RFC2960. RFC3309 updates SCTP to use a 32 bit |
| CRC checksum." |
| ::= { sctpStats 7 } |
| |
| sctpOutCtrlChunks OBJECT-TYPE |
| SYNTAX Counter64 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of SCTP control chunks sent (retransmissions are |
| not included). Control chunks are those chunks different from |
| DATA." |
| REFERENCE |
| "Sections 1.3.5 and 1.4 in RFC2960 refer to control chunk as |
| those chunks different from those that contain user |
| information, i.e., DATA chunks." |
| ::= { sctpStats 8 } |
| |
| sctpOutOrderChunks OBJECT-TYPE |
| SYNTAX Counter64 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of SCTP ordered data chunks sent (retransmissions |
| are not included)." |
| REFERENCE |
| "Section 3.3.1 in RFC2960 defines the ordered data chunk." |
| ::= { sctpStats 9 } |
| |
| sctpOutUnorderChunks OBJECT-TYPE |
| SYNTAX Counter64 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of SCTP unordered chunks (data chunks in which the |
| U bit is set to 1) sent (retransmissions are not included)." |
| REFERENCE |
| "Section 3.3.1 in RFC2960 defines the unordered data chunk." |
| ::= { sctpStats 10 } |
| |
| sctpInCtrlChunks OBJECT-TYPE |
| SYNTAX Counter64 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of SCTP control chunks received (no duplicate |
| chunks included)." |
| REFERENCE |
| "Sections 1.3.5 and 1.4 in RFC2960 refer to control chunk as |
| those chunks different from those that contain user |
| information, i.e., DATA chunks." |
| ::= { sctpStats 11 } |
| |
| sctpInOrderChunks OBJECT-TYPE |
| SYNTAX Counter64 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of SCTP ordered data chunks received (no duplicate |
| chunks included)." |
| REFERENCE |
| "Section 3.3.1 in RFC2960 defines the ordered data chunk." |
| ::= { sctpStats 12 } |
| |
| sctpInUnorderChunks OBJECT-TYPE |
| SYNTAX Counter64 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of SCTP unordered chunks (data chunks in which the |
| U bit is set to 1) received (no duplicate chunks included)." |
| REFERENCE |
| "Section 3.3.1 in RFC2960 defines the unordered data chunk." |
| ::= { sctpStats 13 } |
| |
| sctpFragUsrMsgs OBJECT-TYPE |
| SYNTAX Counter64 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of user messages that have to be fragmented |
| because of the MTU." |
| ::= { sctpStats 14 } |
| |
| sctpReasmUsrMsgs OBJECT-TYPE |
| SYNTAX Counter64 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of user messages reassembled, after conversion |
| into DATA chunks." |
| REFERENCE |
| "Section 6.9 in RFC2960 includes a description of the |
| reassembly process." |
| ::= { sctpStats 15 } |
| |
| sctpOutSCTPPacks OBJECT-TYPE |
| SYNTAX Counter64 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of SCTP packets sent. Retransmitted DATA chunks |
| are included." |
| ::= { sctpStats 16 } |
| |
| sctpInSCTPPacks OBJECT-TYPE |
| SYNTAX Counter64 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of SCTP packets received. Duplicates are |
| included." |
| ::= { sctpStats 17 } |
| |
| sctpDiscontinuityTime OBJECT-TYPE |
| SYNTAX TimeStamp |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of sysUpTime on the most recent occasion at which |
| any one or more of this general statistics counters suffered a |
| discontinuity. The relevant counters are the specific |
| instances associated with this interface of any Counter32 or |
| Counter64 object contained in the SCTP layer statistics |
| (defined below sctpStats branch). If no such discontinuities |
| have occurred since the last re-initialization of the local |
| management subsystem, then this object contains a zero value." |
| REFERENCE |
| "The inclusion of this object is recommended by RFC2578." |
| ::= { sctpStats 18 } |
| |
| -- PROTOCOL GENERAL VARIABLES |
| -- ************************** |
| |
| sctpRtoAlgorithm OBJECT-TYPE |
| SYNTAX INTEGER { |
| other(1), -- Other new one. Future use |
| vanj(2) -- Van Jacobson's algorithm |
| } |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The algorithm used to determine the timeout value (T3-rtx) |
| used for re-transmitting unacknowledged chunks." |
| REFERENCE |
| "Section 6.3.1 and 6.3.2 in RFC2960 cover the RTO calculation |
| and retransmission timer rules." |
| DEFVAL {vanj} -- vanj(2) |
| ::= { sctpParams 1 } |
| |
| sctpRtoMin OBJECT-TYPE |
| SYNTAX Unsigned32 |
| UNITS "milliseconds" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The minimum value permitted by a SCTP implementation for the |
| retransmission timeout value, measured in milliseconds. More |
| refined semantics for objects of this type depend upon the |
| algorithm used to determine the retransmission timeout value. |
| |
| A retransmission time value of zero means immediate |
| retransmission. |
| |
| The value of this object has to be lower than or equal to |
| stcpRtoMax's value." |
| DEFVAL {1000} -- milliseconds |
| ::= { sctpParams 2 } |
| |
| sctpRtoMax OBJECT-TYPE |
| SYNTAX Unsigned32 |
| UNITS "milliseconds" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The maximum value permitted by a SCTP implementation for the |
| retransmission timeout value, measured in milliseconds. More |
| refined semantics for objects of this type depend upon the |
| algorithm used to determine the retransmission timeout value. |
| |
| A retransmission time value of zero means immediate re- |
| transmission. |
| |
| The value of this object has to be greater than or equal to |
| stcpRtoMin's value." |
| DEFVAL {60000} -- milliseconds |
| ::= { sctpParams 3 } |
| |
| sctpRtoInitial OBJECT-TYPE |
| SYNTAX Unsigned32 |
| UNITS "milliseconds" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The initial value for the retransmission timer. |
| |
| A retransmission time value of zero means immediate re- |
| transmission." |
| DEFVAL {3000} -- milliseconds |
| ::= { sctpParams 4 } |
| |
| sctpMaxAssocs OBJECT-TYPE |
| SYNTAX Integer32 (-1 | 0..2147483647) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The limit on the total number of associations the entity can |
| support. In entities where the maximum number of associations |
| is dynamic, this object should contain the value -1." |
| ::= { sctpParams 5 } |
| |
| sctpValCookieLife OBJECT-TYPE |
| SYNTAX Unsigned32 |
| UNITS "milliseconds" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Valid cookie life in the 4-way start-up handshake procedure." |
| REFERENCE |
| "Section 5.1.3 in RFC2960 explains the cookie generation |
| process. Recommended value is per section 14 in RFC2960." |
| DEFVAL {60000} -- milliseconds |
| ::= { sctpParams 6 } |
| |
| sctpMaxInitRetr OBJECT-TYPE |
| SYNTAX Unsigned32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The maximum number of retransmissions at the start-up phase |
| (INIT and COOKIE ECHO chunks). " |
| REFERENCE |
| "Section 5.1.4, 5.1.6 in RFC2960 refers to Max.Init.Retransmit |
| parameter. Recommended value is per section 14 in RFC2960." |
| DEFVAL {8} -- number of attempts |
| ::= { sctpParams 7 } |
| |
| -- TABLES |
| -- ****** |
| |
| -- the SCTP Association TABLE |
| |
| -- The SCTP association table contains information about each |
| -- association in which the local endpoint is involved. |
| |
| sctpAssocTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SctpAssocEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "A table containing SCTP association-specific information." |
| ::= { sctpObjects 3 } |
| |
| sctpAssocEntry OBJECT-TYPE |
| SYNTAX SctpAssocEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "General common variables and statistics for the whole |
| association." |
| INDEX { sctpAssocId } |
| ::= { sctpAssocTable 1 } |
| |
| SctpAssocEntry ::= SEQUENCE { |
| sctpAssocId Unsigned32, |
| sctpAssocRemHostName OCTET STRING, |
| sctpAssocLocalPort InetPortNumber, |
| sctpAssocRemPort InetPortNumber, |
| sctpAssocRemPrimAddrType InetAddressType, |
| sctpAssocRemPrimAddr InetAddress, |
| sctpAssocHeartBeatInterval Unsigned32, |
| sctpAssocState INTEGER, |
| sctpAssocInStreams Unsigned32, |
| sctpAssocOutStreams Unsigned32, |
| sctpAssocMaxRetr Unsigned32, |
| sctpAssocPrimProcess Unsigned32, |
| sctpAssocT1expireds Counter32, -- Statistic |
| sctpAssocT2expireds Counter32, -- Statistic |
| sctpAssocRtxChunks Counter32, -- Statistic |
| sctpAssocStartTime TimeStamp, |
| sctpAssocDiscontinuityTime TimeStamp |
| } |
| |
| sctpAssocId OBJECT-TYPE |
| SYNTAX Unsigned32 (1..4294967295) |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Association Identification. Value identifying the |
| association. " |
| ::= { sctpAssocEntry 1 } |
| |
| sctpAssocRemHostName OBJECT-TYPE |
| SYNTAX OCTET STRING (SIZE(0..255)) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The peer's DNS name. This object needs to have the same |
| format as the encoding in the DNS protocol. This implies that |
| the domain name can be up to 255 octets long, each octet being |
| 0<=x<=255 as value with US-ASCII A-Z having a case insensitive |
| matching. |
| |
| If no DNS domain name was received from the peer at init time |
| (embedded in the INIT or INIT-ACK chunk), this object is |
| meaningless. In such cases the object MUST contain a zero- |
| length string value. Otherwise, it contains the remote host |
| name received at init time." |
| ::= { sctpAssocEntry 2 } |
| |
| sctpAssocLocalPort OBJECT-TYPE |
| SYNTAX InetPortNumber (1..65535) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The local SCTP port number used for this association." |
| ::= { sctpAssocEntry 3 } |
| |
| sctpAssocRemPort OBJECT-TYPE |
| SYNTAX InetPortNumber (1..65535) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The remote SCTP port number used for this association." |
| ::= { sctpAssocEntry 4 } |
| |
| sctpAssocRemPrimAddrType OBJECT-TYPE |
| SYNTAX InetAddressType |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The internet type of primary remote IP address. " |
| ::= { sctpAssocEntry 5 } |
| |
| sctpAssocRemPrimAddr OBJECT-TYPE |
| SYNTAX InetAddress |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The primary remote IP address. The type of this address is |
| determined by the value of sctpAssocRemPrimAddrType. |
| |
| The client side will know this value after INIT_ACK message |
| reception, the server side will know this value when sending |
| INIT_ACK message. However, values will be filled in at |
| established(4) state." |
| ::= { sctpAssocEntry 6 } |
| |
| sctpAssocHeartBeatInterval OBJECT-TYPE |
| SYNTAX Unsigned32 |
| UNITS "milliseconds" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The current heartbeat interval.. |
| |
| Zero value means no HeartBeat, even when the concerned |
| sctpAssocRemAddrHBFlag object is true." |
| DEFVAL {30000} -- milliseconds |
| ::= { sctpAssocEntry 7 } |
| |
| sctpAssocState OBJECT-TYPE |
| SYNTAX INTEGER { |
| closed(1), |
| cookieWait(2), |
| cookieEchoed(3), |
| established(4), |
| shutdownPending(5), |
| shutdownSent(6), |
| shutdownReceived(7), |
| shutdownAckSent(8), |
| deleteTCB(9) |
| } |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "The state of this SCTP association. |
| |
| As in TCP, deleteTCB(9) is the only value that may be set by a |
| management station. If any other value is received, then the |
| agent must return a wrongValue error. |
| |
| If a management station sets this object to the value |
| deleteTCB(9), then this has the effect of deleting the TCB (as |
| defined in SCTP) of the corresponding association on the |
| managed node, resulting in immediate termination of the |
| association. |
| |
| As an implementation-specific option, an ABORT chunk may be |
| sent from the managed node to the other SCTP endpoint as a |
| result of setting the deleteTCB(9) value. The ABORT chunk |
| implies an ungraceful association shutdown." |
| REFERENCE |
| "Section 4 in RFC2960 covers the SCTP Association state |
| diagram." |
| ::= { sctpAssocEntry 8 } |
| |
| sctpAssocInStreams OBJECT-TYPE |
| SYNTAX Unsigned32 (1..65535) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Inbound Streams according to the negotiation at association |
| start up." |
| REFERENCE |
| "Section 1.3 in RFC2960 includes a definition of stream. |
| Section 5.1.1 in RFC2960 covers the streams negotiation |
| process." |
| ::= { sctpAssocEntry 9 } |
| |
| sctpAssocOutStreams OBJECT-TYPE |
| SYNTAX Unsigned32 (1..65535) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Outbound Streams according to the negotiation at association |
| start up. " |
| REFERENCE |
| "Section 1.3 in RFC2960 includes a definition of stream. |
| Section 5.1.1 in RFC2960 covers the streams negotiation |
| process." |
| ::= { sctpAssocEntry 10 } |
| |
| sctpAssocMaxRetr OBJECT-TYPE |
| SYNTAX Unsigned32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The maximum number of data retransmissions in the association |
| context. This value is specific for each association and the |
| upper layer can change it by calling the appropriate |
| primitives. This value has to be smaller than the addition of |
| all the maximum number for all the paths |
| (sctpAssocRemAddrMaxPathRtx). |
| |
| A value of zero value means no retransmissions." |
| DEFVAL {10} -- number of attempts |
| ::= { sctpAssocEntry 11 } |
| |
| sctpAssocPrimProcess OBJECT-TYPE |
| SYNTAX Unsigned32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "This object identifies the system level process which holds |
| primary responsibility for the SCTP association. |
| Wherever possible, this should be the system's native unique |
| identification number. The special value 0 can be used to |
| indicate that no primary process is known. |
| |
| Note that the value of this object can be used as a pointer |
| into the swRunTable of the HOST-RESOURCES-MIB(if the value is |
| smaller than 2147483647) or into the sysApplElmtRunTable of |
| the SYSAPPL-MIB." |
| ::= { sctpAssocEntry 12 } |
| |
| -- Association Statistics |
| |
| sctpAssocT1expireds OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The T1 timer determines how long to wait for an |
| acknowledgement after sending an INIT or COOKIE-ECHO chunk. |
| This object reflects the number of times the T1 timer expires |
| without having received the acknowledgement. |
| |
| Discontinuities in the value of this counter can occur at re- |
| initialization of the management system, and at other times as |
| indicated by the value of sctpAssocDiscontinuityTime." |
| REFERENCE |
| "Section 5 in RFC2960." |
| ::= { sctpAssocEntry 13 } |
| |
| sctpAssocT2expireds OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The T2 timer determines how long to wait for an |
| acknowledgement after sending a SHUTDOWN or SHUTDOWN-ACK |
| chunk. This object reflects the number of times that T2- timer |
| expired. |
| |
| Discontinuities in the value of this counter can occur at re- |
| initialization of the management system, and at other times as |
| indicated by the value of sctpAssocDiscontinuityTime." |
| REFERENCE |
| "Section 9.2 in RFC2960." |
| ::= { sctpAssocEntry 14 } |
| |
| sctpAssocRtxChunks OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "When T3-rtx expires, the DATA chunks that triggered the T3 |
| timer will be re-sent according with the retransmissions |
| rules. Every DATA chunk that was included in the SCTP packet |
| that triggered the T3-rtx timer must be added to the value of |
| this counter. |
| |
| Discontinuities in the value of this counter can occur at re- |
| initialization of the management system, and at other times as |
| indicated by the value of sctpAssocDiscontinuityTime." |
| REFERENCE |
| "Section 6 in RFC2960 covers the retransmission process and |
| rules." |
| ::= { sctpAssocEntry 15 } |
| |
| sctpAssocStartTime OBJECT-TYPE |
| SYNTAX TimeStamp |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of sysUpTime at the time that the association |
| represented by this row enters the ESTABLISHED state, i.e., |
| the sctpAssocState object is set to established(4). The |
| value of this object will be zero: |
| - before the association enters the established(4) |
| state, or |
| |
| - if the established(4) state was entered prior to |
| the last re-initialization of the local network management |
| subsystem." |
| ::= { sctpAssocEntry 16 } |
| |
| sctpAssocDiscontinuityTime OBJECT-TYPE |
| SYNTAX TimeStamp |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of sysUpTime on the most recent occasion at which |
| any one or more of this SCTP association counters suffered a |
| discontinuity. The relevant counters are the specific |
| instances associated with this interface of any Counter32 or |
| Counter64 object contained in the sctpAssocTable or |
| sctpLocalAddrTable or sctpRemAddrTable. If no such |
| discontinuities have occurred since the last re-initialization |
| of the local management subsystem, then this object contains a |
| zero value. " |
| REFERENCE |
| "The inclusion of this object is recommended by RFC2578." |
| ::= { sctpAssocEntry 17 } |
| |
| -- Expanded tables: Including Multi-home feature |
| |
| -- Local Address TABLE |
| -- ******************* |
| |
| sctpAssocLocalAddrTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SctpAssocLocalAddrEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Expanded table of sctpAssocTable based on the AssocId index. |
| This table shows data related to each local IP address which |
| is used by this association." |
| ::= { sctpObjects 4 } |
| |
| sctpAssocLocalAddrEntry OBJECT-TYPE |
| SYNTAX SctpAssocLocalAddrEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Local information about the available addresses. There will |
| be an entry for every local IP address defined for this |
| |
| association. |
| Implementors need to be aware that if the size of |
| sctpAssocLocalAddr exceeds 114 octets then OIDs of column |
| instances in this table will have more than 128 sub- |
| identifiers and cannot be accessed using SNMPv1, SNMPv2c, or |
| SNMPv3." |
| INDEX { sctpAssocId, -- shared index |
| sctpAssocLocalAddrType, |
| sctpAssocLocalAddr } |
| ::= { sctpAssocLocalAddrTable 1 } |
| |
| SctpAssocLocalAddrEntry ::= SEQUENCE { |
| sctpAssocLocalAddrType InetAddressType, |
| sctpAssocLocalAddr InetAddress, |
| sctpAssocLocalAddrStartTime TimeStamp |
| } |
| |
| sctpAssocLocalAddrType OBJECT-TYPE |
| SYNTAX InetAddressType |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Internet type of local IP address used for this association." |
| ::= { sctpAssocLocalAddrEntry 1 } |
| |
| sctpAssocLocalAddr OBJECT-TYPE |
| SYNTAX InetAddress |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "The value of a local IP address available for this |
| association. The type of this address is determined by the |
| value of sctpAssocLocalAddrType." |
| ::= { sctpAssocLocalAddrEntry 2 } |
| |
| sctpAssocLocalAddrStartTime OBJECT-TYPE |
| SYNTAX TimeStamp |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of sysUpTime at the time that this row was |
| created." |
| ::= { sctpAssocLocalAddrEntry 3 } |
| |
| -- Remote Addresses TABLE |
| -- ********************** |
| |
| sctpAssocRemAddrTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SctpAssocRemAddrEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Expanded table of sctpAssocTable based on the AssocId index. |
| This table shows data related to each remote peer IP address |
| which is used by this association." |
| ::= { sctpObjects 5 } |
| |
| sctpAssocRemAddrEntry OBJECT-TYPE |
| SYNTAX SctpAssocRemAddrEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Information about the most important variables for every |
| remote IP address. There will be an entry for every remote IP |
| address defined for this association. |
| |
| Implementors need to be aware that if the size of |
| sctpAssocRemAddr exceeds 114 octets then OIDs of column |
| instances in this table will have more than 128 sub- |
| identifiers and cannot be accessed using SNMPv1, SNMPv2c, or |
| SNMPv3." |
| INDEX { sctpAssocId, -- shared index |
| sctpAssocRemAddrType, |
| sctpAssocRemAddr } |
| ::= { sctpAssocRemAddrTable 1 } |
| |
| SctpAssocRemAddrEntry ::= SEQUENCE { |
| sctpAssocRemAddrType InetAddressType, |
| sctpAssocRemAddr InetAddress, |
| sctpAssocRemAddrActive TruthValue, |
| sctpAssocRemAddrHBActive TruthValue, |
| sctpAssocRemAddrRTO Unsigned32, |
| sctpAssocRemAddrMaxPathRtx Unsigned32, |
| sctpAssocRemAddrRtx Counter32, -- Statistic |
| sctpAssocRemAddrStartTime TimeStamp |
| } |
| |
| sctpAssocRemAddrType OBJECT-TYPE |
| SYNTAX InetAddressType |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Internet type of a remote IP address available for this |
| association." |
| ::= { sctpAssocRemAddrEntry 1 } |
| |
| sctpAssocRemAddr OBJECT-TYPE |
| SYNTAX InetAddress |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "The value of a remote IP address available for this |
| association. The type of this address is determined by the |
| value of sctpAssocLocalAddrType." |
| ::= { sctpAssocRemAddrEntry 2 } |
| |
| sctpAssocRemAddrActive OBJECT-TYPE |
| SYNTAX TruthValue |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "This object gives information about the reachability of this |
| specific remote IP address. |
| |
| When the object is set to 'true' (1), the remote IP address is |
| understood as Active. Active means that the threshold of no |
| answers received from this IP address has not been reached. |
| |
| When the object is set to 'false' (2), the remote IP address |
| is understood as Inactive. Inactive means that either no |
| heartbeat or any other message was received from this address, |
| reaching the threshold defined by the protocol." |
| REFERENCE |
| "The remote transport states are defined as Active and |
| Inactive in the SCTP, RFC2960." |
| ::= { sctpAssocRemAddrEntry 3 } |
| |
| sctpAssocRemAddrHBActive OBJECT-TYPE |
| SYNTAX TruthValue |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "This object indicates whether the optional Heartbeat check |
| associated to one destination transport address is activated |
| or not (value equal to true or false, respectively). " |
| ::= { sctpAssocRemAddrEntry 4 } |
| |
| sctpAssocRemAddrRTO OBJECT-TYPE -- T3-rtx- Timer |
| SYNTAX Unsigned32 |
| UNITS "milliseconds" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The current Retransmission Timeout. T3-rtx timer as defined |
| in the protocol SCTP." |
| REFERENCE |
| "Section 6.3 in RFC2960 deals with the Retransmission Timer |
| Management." |
| ::= { sctpAssocRemAddrEntry 5 } |
| |
| sctpAssocRemAddrMaxPathRtx OBJECT-TYPE |
| SYNTAX Unsigned32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Maximum number of DATA chunks retransmissions allowed to a |
| remote IP address before it is considered inactive, as defined |
| in RFC2960." |
| REFERENCE |
| "Section 8.2, 8.3 and 14 in RFC2960." |
| DEFVAL {5} -- number of attempts |
| ::= { sctpAssocRemAddrEntry 6 } |
| |
| -- Remote Address Statistic |
| |
| sctpAssocRemAddrRtx OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Number of DATA chunks retransmissions to this specific IP |
| address. When T3-rtx expires, the DATA chunk that triggered |
| the T3 timer will be re-sent according to the retransmissions |
| rules. Every DATA chunk that is included in a SCTP packet and |
| was transmitted to this specific IP address before, will be |
| included in this counter. |
| |
| Discontinuities in the value of this counter can occur at re- |
| initialization of the management system, and at other times as |
| indicated by the value of sctpAssocDiscontinuityTime." |
| ::= { sctpAssocRemAddrEntry 7 } |
| |
| sctpAssocRemAddrStartTime OBJECT-TYPE |
| SYNTAX TimeStamp |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of sysUpTime at the time that this row was |
| created." |
| ::= { sctpAssocRemAddrEntry 8 } |
| |
| -- ASSOCIATION INVERSE TABLE |
| -- ************************* |
| |
| -- BY LOCAL PORT |
| |
| sctpLookupLocalPortTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SctpLookupLocalPortEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "With the use of this table, a list of associations which are |
| |
| using the specified local port can be retrieved." |
| ::= { sctpObjects 6 } |
| |
| sctpLookupLocalPortEntry OBJECT-TYPE |
| SYNTAX SctpLookupLocalPortEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "This table is indexed by local port and association ID. |
| Specifying a local port, we would get a list of the |
| associations whose local port is the one specified." |
| INDEX { sctpAssocLocalPort, |
| sctpAssocId } |
| ::= { sctpLookupLocalPortTable 1 } |
| |
| SctpLookupLocalPortEntry::= SEQUENCE { |
| sctpLookupLocalPortStartTime TimeStamp |
| } |
| |
| sctpLookupLocalPortStartTime OBJECT-TYPE |
| SYNTAX TimeStamp |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of sysUpTime at the time that this row was created. |
| |
| As the table will be created after the sctpAssocTable |
| creation, this value could be equal to the sctpAssocStartTime |
| object from the main table." |
| ::= { sctpLookupLocalPortEntry 1 } |
| |
| -- BY REMOTE PORT |
| |
| sctpLookupRemPortTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SctpLookupRemPortEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "With the use of this table, a list of associations which are |
| using the specified remote port can be got" |
| ::= { sctpObjects 7 } |
| |
| sctpLookupRemPortEntry OBJECT-TYPE |
| SYNTAX SctpLookupRemPortEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "This table is indexed by remote port and association ID. |
| Specifying a remote port we would get a list of the |
| associations whose local port is the one specified " |
| INDEX { sctpAssocRemPort, |
| sctpAssocId } |
| ::= { sctpLookupRemPortTable 1 } |
| |
| SctpLookupRemPortEntry::= SEQUENCE { |
| sctpLookupRemPortStartTime TimeStamp |
| } |
| |
| sctpLookupRemPortStartTime OBJECT-TYPE |
| SYNTAX TimeStamp |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of sysUpTime at the time that this row was created. |
| |
| As the table will be created after the sctpAssocTable |
| creation, this value could be equal to the sctpAssocStartTime |
| object from the main table." |
| ::= { sctpLookupRemPortEntry 1 } |
| |
| -- BY REMOTE HOST NAME |
| |
| sctpLookupRemHostNameTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SctpLookupRemHostNameEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "With the use of this table, a list of associations with that |
| particular host can be retrieved." |
| ::= { sctpObjects 8 } |
| |
| sctpLookupRemHostNameEntry OBJECT-TYPE |
| SYNTAX SctpLookupRemHostNameEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "This table is indexed by remote host name and association ID. |
| Specifying a host name we would get a list of the associations |
| specifying that host name as the remote one. |
| |
| Implementors need to be aware that if the size of |
| sctpAssocRemHostName exceeds 115 octets then OIDs of column |
| instances in this table will have more than 128 sub- |
| identifiers and cannot be accessed using SNMPv1, SNMPv2c, or |
| SNMPv3." |
| INDEX { sctpAssocRemHostName, |
| sctpAssocId } |
| ::= { sctpLookupRemHostNameTable 1 } |
| |
| SctpLookupRemHostNameEntry::= SEQUENCE { |
| sctpLookupRemHostNameStartTime TimeStamp |
| } |
| |
| sctpLookupRemHostNameStartTime OBJECT-TYPE |
| SYNTAX TimeStamp |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of sysUpTime at the time that this row was created. |
| |
| As the table will be created after the sctpAssocTable |
| creation, this value could be equal to the sctpAssocStartTime |
| object from the main table." |
| ::= { sctpLookupRemHostNameEntry 1 } |
| |
| -- BY REMOTE PRIMARY IP ADDRESS |
| |
| sctpLookupRemPrimIPAddrTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SctpLookupRemPrimIPAddrEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "With the use of this table, a list of associations that have |
| the specified IP address as primary within the remote set of |
| active addresses can be retrieved." |
| ::= { sctpObjects 9 } |
| |
| sctpLookupRemPrimIPAddrEntry OBJECT-TYPE |
| SYNTAX SctpLookupRemPrimIPAddrEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "This table is indexed by primary address and association ID. |
| Specifying a primary address, we would get a list of the |
| associations that have the specified remote IP address marked |
| as primary. |
| Implementors need to be aware that if the size of |
| sctpAssocRemPrimAddr exceeds 114 octets then OIDs of column |
| instances in this table will have more than 128 sub- |
| identifiers and cannot be accessed using SNMPv1, SNMPv2c, or |
| SNMPv3." |
| INDEX { sctpAssocRemPrimAddrType, |
| sctpAssocRemPrimAddr, |
| sctpAssocId } |
| ::= { sctpLookupRemPrimIPAddrTable 1 } |
| |
| SctpLookupRemPrimIPAddrEntry::= SEQUENCE { |
| sctpLookupRemPrimIPAddrStartTime TimeStamp |
| } |
| |
| sctpLookupRemPrimIPAddrStartTime OBJECT-TYPE |
| SYNTAX TimeStamp |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of SysUpTime at the time that this row was created. |
| |
| As the table will be created after the sctpAssocTable |
| creation, this value could be equal to the sctpAssocStartTime |
| object from the main table." |
| ::= { sctpLookupRemPrimIPAddrEntry 1 } |
| |
| -- BY REMOTE IP ADDRESS |
| |
| sctpLookupRemIPAddrTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SctpLookupRemIPAddrEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "With the use of this table, a list of associations that have |
| the specified IP address as one of the remote ones can be |
| retrieved. " |
| ::= { sctpObjects 10 } |
| |
| sctpLookupRemIPAddrEntry OBJECT-TYPE |
| SYNTAX SctpLookupRemIPAddrEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "This table is indexed by a remote IP address and association |
| ID. Specifying an IP address we would get a list of the |
| associations that have the specified IP address included |
| within the set of remote IP addresses." |
| INDEX { sctpAssocRemAddrType, |
| sctpAssocRemAddr, |
| sctpAssocId } |
| ::= { sctpLookupRemIPAddrTable 1 } |
| |
| SctpLookupRemIPAddrEntry::= SEQUENCE { |
| |
| sctpLookupRemIPAddrStartTime TimeStamp |
| } |
| |
| sctpLookupRemIPAddrStartTime OBJECT-TYPE |
| SYNTAX TimeStamp |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of SysUpTime at the time that this row was created. |
| |
| As the table will be created after the sctpAssocTable |
| creation, this value could be equal to the sctpAssocStartTime |
| object from the main table." |
| ::= { sctpLookupRemIPAddrEntry 1 } |
| |
| -- 4.1 Conformance Information |
| |
| sctpMibConformance OBJECT IDENTIFIER ::= { sctpMIB 2 } |
| sctpMibCompliances OBJECT IDENTIFIER ::= { sctpMibConformance 1 } |
| sctpMibGroups OBJECT IDENTIFIER ::= { sctpMibConformance 2 } |
| |
| -- 4.1.1 Units of conformance |
| |
| -- |
| -- MODULE GROUPS |
| -- |
| |
| sctpLayerParamsGroup OBJECT-GROUP |
| OBJECTS { sctpRtoAlgorithm, |
| sctpRtoMin, |
| sctpRtoMax, |
| sctpRtoInitial, |
| sctpMaxAssocs, |
| sctpValCookieLife, |
| sctpMaxInitRetr |
| } |
| STATUS current |
| DESCRIPTION |
| "Common parameters for the SCTP layer, i.e., for all the |
| associations. They can usually be referred to as configuration |
| parameters." |
| ::= { sctpMibGroups 1 } |
| |
| sctpStatsGroup OBJECT-GROUP |
| OBJECTS { sctpCurrEstab, |
| sctpActiveEstabs, |
| sctpPassiveEstabs, |
| sctpAborteds, |
| sctpShutdowns, |
| sctpOutOfBlues, |
| sctpChecksumErrors, |
| sctpOutCtrlChunks, |
| sctpOutOrderChunks, |
| sctpOutUnorderChunks, |
| sctpInCtrlChunks, |
| sctpInOrderChunks, |
| sctpInUnorderChunks, |
| sctpFragUsrMsgs, |
| sctpReasmUsrMsgs, |
| sctpOutSCTPPacks, |
| sctpInSCTPPacks, |
| sctpDiscontinuityTime, |
| sctpAssocT1expireds, |
| sctpAssocT2expireds, |
| sctpAssocRtxChunks, |
| sctpAssocRemAddrRtx |
| } |
| STATUS current |
| DESCRIPTION |
| "Statistics group. It includes the objects to collect state |
| changes in the SCTP protocol local layer and flow control |
| statistics." |
| ::= { sctpMibGroups 2 } |
| |
| sctpPerAssocParamsGroup OBJECT-GROUP |
| OBJECTS { sctpAssocRemHostName, |
| sctpAssocLocalPort, |
| sctpAssocRemPort, |
| sctpAssocRemPrimAddrType, |
| sctpAssocRemPrimAddr, |
| sctpAssocHeartBeatInterval, |
| sctpAssocState, |
| sctpAssocInStreams, |
| sctpAssocOutStreams, |
| sctpAssocMaxRetr, |
| sctpAssocPrimProcess, |
| sctpAssocStartTime, |
| sctpAssocDiscontinuityTime, |
| sctpAssocLocalAddrStartTime, |
| sctpAssocRemAddrActive, |
| sctpAssocRemAddrHBActive, |
| sctpAssocRemAddrRTO, |
| sctpAssocRemAddrMaxPathRtx, |
| sctpAssocRemAddrStartTime |
| } |
| STATUS current |
| DESCRIPTION |
| "The SCTP group of objects to manage per-association |
| parameters. These variables include all the SCTP basic |
| features." |
| ::= { sctpMibGroups 3 } |
| |
| sctpPerAssocStatsGroup OBJECT-GROUP |
| OBJECTS |
| { sctpAssocT1expireds, |
| sctpAssocT2expireds, |
| sctpAssocRtxChunks, |
| sctpAssocRemAddrRtx |
| } |
| STATUS current |
| DESCRIPTION |
| "Per Association Statistics group. It includes the objects to |
| collect flow control statistics per association." |
| ::= { sctpMibGroups 4 } |
| |
| sctpInverseGroup OBJECT-GROUP |
| OBJECTS { sctpLookupLocalPortStartTime, |
| sctpLookupRemPortStartTime, |
| sctpLookupRemHostNameStartTime, |
| sctpLookupRemPrimIPAddrStartTime, |
| sctpLookupRemIPAddrStartTime |
| } |
| STATUS current |
| DESCRIPTION |
| "Objects used in the inverse lookup tables." |
| ::= { sctpMibGroups 5 } |
| |
| -- 4.1.2 Compliance Statements |
| |
| -- |
| -- MODULE COMPLIANCES |
| -- |
| |
| sctpMibCompliance MODULE-COMPLIANCE |
| STATUS current |
| DESCRIPTION |
| "The compliance statement for SNMP entities which implement |
| this SCTP MIB Module. |
| |
| There are a number of INDEX objects that cannot be represented |
| in the form of OBJECT clauses in SMIv2, but for which we have |
| the following compliance requirements, expressed in OBJECT |
| clause form in this description clause: |
| |
| -- OBJECT sctpAssocLocalAddrType |
| -- SYNTAX InetAddressType {ipv4(1), ipv6(2)} |
| -- DESCRIPTION |
| -- It is only required to have IPv4 and IPv6 addresses without |
| -- zone indices. |
| -- The address with zone indices is required if an |
| -- implementation can connect multiple zones. |
| -- |
| -- OBJECT sctpAssocLocalAddr |
| -- SYNTAX InetAddress (SIZE(4|16)) |
| -- DESCRIPTION |
| -- An implementation is only required to support globally |
| -- unique IPv4 and IPv6 addresses. |
| -- |
| -- OBJECT sctpAssocRemAddrType |
| -- SYNTAX InetAddressType {ipv4(1), ipv6(2)} |
| -- DESCRIPTION |
| -- It is only required to have IPv4 and IPv6 addresses without |
| -- zone indices. |
| -- The address with zone indices is required if an |
| -- implementation can connect multiple zones. |
| -- |
| -- OBJECT sctpAssocRemAddr |
| -- SYNTAX InetAddress (SIZE(4|16)) |
| -- DESCRIPTION |
| -- An implementation is only required to support globally |
| -- unique IPv4 and IPv6 addresses. |
| -- |
| " -- closes DESCRIPTION clause of MODULE-COMPLIANCE |
| |
| MODULE -- this module |
| |
| MANDATORY-GROUPS { sctpLayerParamsGroup, |
| sctpPerAssocParamsGroup, |
| sctpStatsGroup, |
| sctpPerAssocStatsGroup |
| } |
| |
| OBJECT sctpAssocRemPrimAddrType |
| SYNTAX InetAddressType { ipv4(1), |
| ipv6(2) |
| } |
| DESCRIPTION |
| "It is only required to have IPv4 and IPv6 addresses |
| without zone indices. |
| |
| The address with zone indices is required if an |
| implementation can connect multiple zones." |
| |
| OBJECT sctpAssocRemPrimAddr |
| SYNTAX InetAddress (SIZE(4|16)) |
| DESCRIPTION |
| "An implementation is only required to support globally |
| unique IPv4 and globally unique IPv6 addresses." |
| |
| OBJECT sctpAssocState |
| WRITE-SYNTAX INTEGER { deleteTCB(9) } |
| MIN-ACCESS read-only |
| DESCRIPTION |
| "Only the deleteTCB(9) value MAY be set by a management |
| station at most. A read-only option is also considered to |
| be compliant with this MIB module description." |
| |
| GROUP sctpInverseGroup |
| DESCRIPTION |
| "Objects used in inverse lookup tables. This should be |
| implemented, at the discretion of the implementers, for |
| easier lookups in the association tables" |
| ::= { sctpMibCompliances 1 } |
| |
| END |
