| <!-- this is a makerelease script: http://github.com/hardaker/makerelease --> |
| <makerelease> |
| <!-- TODO: |
| - make mancp below happens before configure is run, which |
| doesn't work if it's a complete work. |
| - configure options should be prompted into a variable and used |
| --> |
| <steps> |
| <step type="section" title="Setup Steps" mandatory="1"> |
| <text> |
| This set of steps will do some preliminary "safety" checks to |
| ensure the local environment is ok and setup some important |
| information. |
| </text> |
| <steps> |
| <step type="system" title="Old Code"> |
| <text> |
| This checks for old tarballs (and particularly unpacked |
| distributions) which might confuse the later processing. |
| If this step finds outstanding files you need to remove |
| them before continuing! |
| </text> |
| <commands> |
| <command expectfailure="1">find . -name 'net-snmp-5*' | egrep '^[^\?]'</command> |
| </commands> |
| </step> |
| <step type="system" title="Setup Check"> |
| <text> |
| This should show the last version number published in this |
| branch by looking at the time line in the README file: |
| </text> |
| <commands> |
| <command>head -1 README</command> |
| </commands> |
| </step> |
| <step type="prompt" prompt="Enter the new version number:" |
| title="Pick a Version Number" |
| parameter="VERSION"> |
| <text> |
| Please enter the version number to publish. Net-SNMP |
| convention dictates that this be a version number like 5.4 or |
| 5.4.1. Pre-releases that occur before a branch freezes should |
| be appended with ".preN" like 5.4.1.pre2. Release-candidates |
| should be labeled ".rcN" like 5.4.1.rc1. |
| </text> |
| </step> |
| <step type="prompt" prompt="Enter the last version number:" |
| title="Enter the last version number" |
| parameter="LASTVERSION"> |
| <text> |
| Please enter the last version number that the changelog should be |
| generated from. This should be easy for a new release on a branch, |
| but may be more tricky for a main release. |
| </text> |
| </step> |
| <step type="perl" title="Defining a second internal version string" |
| mandatory="1"> |
| <perl> |
| <code> |
| # version number with dashes instead of dots |
| $self->{'parameters'}{'VERSIONTAGNAME'} = |
| "v" . $self->{'parameters'}{'VERSION'}; |
| |
| $self->{'parameters'}{'LASTVERSIONTAGNAME'} = |
| "v" . $self->{'parameters'}{'LASTVERSION'}; |
| |
| # target version number (without preN/rcN) |
| $self->{'parameters'}{'VERSIONTARGET'} = |
| $self->{'parameters'}{'VERSION'}; |
| if ( $self->{'parameters'}{'VERSIONTARGET'} =~ /\.pre.*/ ) { |
| $self->{'parameters'}{'VERSIONTARGET'} =~ s/\.pre.*//; |
| $self->{'parameters'}{'RELEASETYPE'} = "pre"; |
| } elsif ( $self->{'parameters'}{'VERSIONTARGET'} =~ /\.rc.*/ ) { |
| $self->{'parameters'}{'VERSIONTARGET'} =~ s/\.rc.*//; |
| $self->{'parameters'}{'RELEASETYPE'} = "rc"; |
| } else { |
| $self->{'parameters'}{'RELEASETYPE'} = "full"; |
| } |
| |
| # version in floating point form for perl modules |
| my ($major, $minor, $patch, $opps) = |
| ($self->{'parameters'}{'VERSION'} =~ |
| /^(\d+)\.(\d+)\.?(\d*)\.?(\d*)/); |
| $self->{'parameters'}{'VERSIONFLOAT'} = |
| $major + $minor/100 + $patch/10000 + $opps/100000; |
| |
| # find out the git branch we're on. |
| open(GITINFO,"git branch|"); |
| while(<GITINFO>) { |
| if (/^\*\s+(.*)/) { |
| $self->{'parameters'}{'BRANCHPATH'} = $1; |
| my ($nextBranch); |
| $nextBranch = <GITINFO>; |
| $nextBranch =~ s/^\s+//; |
| $self->{'parameters'}{'NEXTBRANCH'} = $nextBranch; |
| last; |
| } |
| } |
| close(GITINFO); |
| |
| return 0; |
| </code> |
| </perl> |
| </step> |
| <step type="Informational" title="Release Parameter Information" pause="1"> |
| <text> |
| Here is the configured information we'll be using: |
| |
| VERSION: {VERSION} |
| |
| VERSION tag name: {VERSIONTAGNAME} |
| |
| Floating point VERSION: {VERSIONFLOAT} |
| |
| Git Branch Name: {BRANCHPATH} |
| </text> |
| </step> |
| <step type="system" stepname="update" title="update"> |
| <text>We need to make sure your code is up to date and |
| matches the latest sources in this branch.</text> |
| <commands> |
| <command>git pull</command> |
| </commands> |
| </step> |
| <step type="system" stepname="update" title="Check for changes"> |
| <text>This steps looks for outstanding files that have been |
| modified. There should be no outstanding modifications! If |
| this step finds outstanding modified files you need to check |
| them in or revert them before continuing!</text> |
| <commands> |
| <command expectfailure="1">git status --porcelain | egrep '^[^\?]'</command> |
| </commands> |
| </step> |
| </steps> |
| </step> |
| <step type="section" title="Source Code Setup"> |
| <text> |
| This set of steps will modify various places within the source |
| code tree to bring it up to date with the new version number |
| about to be published. |
| </text> |
| <steps> |
| <step type="section" title="Libtool / Library versioning setup"> |
| <text> |
| These steps will modify the various files in the source tree |
| that contain the version number, show you the changes that |
| will be made and then check in the resulting changes if you |
| approve of them. |
| </text> |
| <steps> |
| <step type="informational" pause="true" |
| skipunless="'{RELEASETYPE}' eq 'pre'" |
| stepname="version:manualedit" title="version:libtoolmanualedit"> |
| <text> |
| You may need to edit Makefile.top to update the library |
| version numbering - see the comments there about LIBCURRENT, |
| LIBAGE and LIBREVISION for details. This is usually only |
| needed for the first pre-release of a given version. |
| |
| This script will commit the file for you after you're done. |
| </text> |
| </step> |
| <step prompt="true" type="system" stepname="version:libtoolcommit" |
| title="version:commit"> |
| <text>We'll now commit the Makefile.top file if you've |
| modified it.</text> |
| <commands> |
| <command ignoreerror="1">git commit -m "version update for {VERSION}" Makefile.top</command> |
| </commands> |
| </step> |
| </steps> |
| </step> |
| <step type="section" title="Change The Version Number"> |
| <text> |
| These steps will modify the various files in the source tree |
| that contain the version number, show you the changes that |
| will be made and then check in the resulting changes if you |
| approve of them. |
| </text> |
| <steps> |
| <step type="modify" title="Modify the source files" |
| stepname="release:versionstamp"> |
| <text> |
| We will now modify files through the code to replace the |
| version number with the newer one. |
| </text> |
| <modifications> |
| <modify |
| find="VERSION = '(.*)'" |
| replace="VERSION = \'{VERSIONFLOAT}\'"> |
| <files> |
| <file>perl/SNMP/SNMP.pm</file> |
| <file>perl/agent/agent.pm</file> |
| <file>perl/agent/Support/Support.pm*</file> |
| <file>perl/agent/default_store/default_store.pm</file> |
| <file>perl/default_store/default_store.pm</file> |
| <file>perl/OID/OID.pm</file> |
| <file>perl/ASN/ASN.pm</file> |
| <file>perl/AnyData_SNMP/Storage.pm</file> |
| <file>perl/AnyData_SNMP/Format.pm</file> |
| <file>perl/TrapReceiver/TrapReceiver.pm</file> |
| </files> |
| </modify> |
| <!-- this will fail (ok) against future versions with |
| configure generated PACKAGE_VERSION usage --> |
| <modify |
| find="NetSnmpVersionInfo = "[\d\.]+"" |
| replace="NetSnmpVersionInfo = "{VERSION}""> |
| <files> |
| <file>snmplib/snmp_version.c</file> |
| </files> |
| </modify> |
| <modify |
| find="Version: [\.0-9a-zA-Z]+" |
| replace="Version: {VERSION}"> |
| <files> |
| <file>README</file> |
| <file>FAQ</file> |
| <file>dist/net-snmp.spec</file> |
| </files> |
| </modify> |
| <modify |
| find="VERSION = [\.0-9a-zA-Z]+" |
| replace="VERSION = {VERSION}"> |
| <files> |
| <file>dist/Makefile*</file> |
| </files> |
| </modify> |
| <modify |
| find="AC_INIT\(\[Net-SNMP\], \[([^\]]+)\]" |
| replace="AC_INIT([Net-SNMP], [{VERSION}]"> |
| <files> |
| <file>configure.in*</file> |
| <file>configure.ac*</file> |
| </files> |
| </modify> |
| <modify |
| find="NetSnmpVersionInfo = "[^"]+"" |
| replace="NetSnmpVersionInfo = "{VERSION}""> |
| <files> |
| <file>snmplib/snmp_version.c</file> |
| </files> |
| </modify> |
| </modifications> |
| </step> |
| <step type="system" stepname="release:versionautoconf" |
| title="Running autoconf to rebuild configure"> |
| <text>We modified configure.in, so we now need to run |
| autoconf to rebuild configure.</text> |
| <commands> |
| <command>rm -f configure</command> |
| <command>dist/run-autoconf</command> |
| </commands> |
| </step> |
| <step type="system" stepname="release:versiondiff" |
| title="Running svn diff to check changes"> |
| |
| <text>Check the following changes for proper version number |
| differences before we commit the chances.</text> |
| <commands> |
| <command>git diff</command> |
| </commands> |
| </step> |
| <step type="system" stepname="release:versioncommit" pause="true" |
| title="Running git commit to commit the changes"> |
| |
| <text>Check the changes in the above diff and then we'll |
| commit the results here if they look ok.</text> |
| <commands> |
| <command>git commit -a -m "Version number update: {VERSION}"</command> |
| </commands> |
| </step> |
| </steps> |
| </step> |
| <step type="section" title="Handle dist/release"> |
| <steps> |
| <step type="system" skipunless="'{RELEASETYPE}' eq 'rc'"> |
| <text>Note in 'dist/release' that this branch is in release candidate mode |
| </text> |
| <commands> |
| <command>git checkout V5-4-patches</command> |
| <command>echo {BRANCHPATH} >> dist/release </command> |
| <command ignoreerror="1">git commit -m "Release Candidate for {BRANCHPATH}" dist/release</command> |
| <command>git checkout {BRANCHPATH} </command> |
| <command>git merge V5-4-patches </command> |
| <command>git commit </command> |
| </commands> |
| </step> |
| <step type="system" skipif="'{RELEASETYPE}' eq 'rc'"> |
| <text>Ensure that 'dist/release' doesn't reference this branch |
| </text> |
| <commands> |
| <command>git checkout V5-4-patches</command> |
| <command>grep -v {BRANCHPATH} dist/release > dist/release.new </command> |
| <command>mv dist/release.new dist/release </command> |
| <command ignoreerror="1">git commit -m "{BRANCHPATH} out of Release Candidate" dist/release</command> |
| <command>git checkout {BRANCHPATH} </command> |
| <command>git merge V5-4-patches </command> |
| <command>git commit </command> |
| </commands> |
| </step> |
| </steps> |
| </step> |
| <step type="system" stepname="docs:make" title="docs:make"> |
| <text>This step will create manual pages from doxygen |
| instrumented code files.</text> |
| <commands> |
| <command> |
| if [ -f Makefile ] |
| then |
| make docs |
| make mancp |
| fi |
| </command> |
| </commands> |
| </step> |
| <step type="system" stepname="docs:update" title="docs:update"> |
| <text>This will run git status to figure out what files have |
| changed since the previous man page generation steps were |
| done. After this step, we'll commit all the modified files. |
| |
| You may find additional files (marked with a ?) that should |
| be added to the svn repository and you'll need to do this by |
| hand before going on to the next step. |
| |
| Note: based on a recent net-snmp-admin discussion, we're no |
| longer going to be adding the bazillions of man pages that |
| doxygen generates by default. Only important ones should be |
| added.</text> |
| <commands> |
| <command>git status --porcelain man</command> |
| </commands> |
| </step> |
| <step type="informational" pause="true" stepname="docs:manualaddnewman" title="docs:manualaddnewman"> |
| <text> |
| Update man/Makefile.in with details of any new man pages, |
| and run 'git add' on them. |
| |
| I'll commit these changes for you after you're done. |
| </text> |
| </step> |
| <step prompt="true" type="system" stepname="docs:commit" title="docs:commit"> |
| <commands> |
| <command ignoreerror="1">git commit -m "documentation update for {VERSION}" man</command> |
| </commands> |
| </step> |
| </steps> |
| </step> |
| <step type="section" title="Testing Steps"> |
| <text> |
| These steps will help you test the source code to ensure it |
| passes some simple "it works" tests. |
| </text> |
| <steps> |
| <step type="system" stepname="build:distclean" title="build:distclean"> |
| <text>First we need to clean the existing build tree and |
| start from scratch.</text> |
| <commands> |
| <command>NETSNMP_DONT_CHECK_VERSION=1 make distclean</command> |
| </commands> |
| </step> |
| <step type="system" stepname="build:configure" title="build:configure"> |
| <text>We need to run configure to set up the build tree.</text> |
| <commands> |
| <command>./configure --cache=config.cache --with-defaults --with-mib-modules='host examples examples/example testhandler smux Rmon disman/event-mib' --with-transports=IPX --enable-ipv6 --enable-embedded-perl --enable-shared</command> |
| </commands> |
| </step> |
| <step type="system" stepname="build:make" title="build:make"> |
| <text>Then we need to build the code</text> |
| <commands> |
| <command>NETSNMP_DONT_CHECK_VERSION=1 make</command> |
| </commands> |
| </step> |
| <step type="system" stepname="build:test" title="build:test"> |
| <text>Now we run "make test" which should produce a perfect |
| set up test results. If not, this needs to be fixed or at |
| least understood and accepted as is for some other reason.</text> |
| <commands> |
| <command>make test TESTOPTS=-n</command> |
| </commands> |
| </step> |
| <step type="system" stepname="code:checkcomments" title="code:checkcomments"> |
| <text>This command looks for source code oddities and policy |
| violations.</text> |
| <commands> |
| <command>make checks</command> |
| </commands> |
| </step> |
| </steps> |
| </step> |
| <step type="section" title="Release File Steps"> |
| <text>Certain files in the distribution are built on a |
| per-release basis. These steps will help set up these files.</text> |
| <steps> |
| <step type="system" stepname="code:makedepend" title="code:makedepend"> |
| <text>This step creates Makefile dependencies using the |
| "distdepend" rule in the top level Makefile. |
| |
| Note that if you have any additional MIB module code files in the |
| source tree, these will be included in the Makefile dependency list. |
| You may wish to remove these and re-run "make distdepend" before |
| committing the changes. |
| </text> |
| <commands> |
| <command>make distdepend</command> |
| </commands> |
| </step> |
| <step prompt="true" type="system" stepname="code:commitdepend" title="code:commitdepend"> |
| <text>This step commits the dependency changes done in the |
| previous step.</text> |
| <commands> |
| <command ignoreerror="1">git commit -m "make depend for {VERSION}" `find . -name Makefile.depend`</command> |
| </commands> |
| </step> |
| <step type="system" stepname="changelog:create" title="Creating a changelog update"> |
| <text>We need to extract the portions of the change logs |
| committed to the repository.</text> |
| <commands> |
| <command>git log --no-merges {LASTVERSIONTAGNAME}..HEAD > ChangeLog.add</command> |
| </commands> |
| </step> |
| <step type="informational" pause="true" stepname="changelog:manualedit" title="changelog:manualedit"> |
| <text> |
| You need to manually insert the *relevent* portions of |
| 'ChangeLog.add' into the ChangeLog file. |
| |
| I also suggest truncating ChangeLog.add to only contain |
| the *relevent* portions for this release, as this will make |
| CHANGES.new2 and NEWS.new2 more accurate later on. |
| |
| I'll commit these changes for you after you finish cutting |
| out the proper changes. |
| </text> |
| </step> |
| <step prompt="true" type="system" stepname="changelog:commit" title="changelog:commit"> |
| <commands> |
| <command>git commit -m "version update for {VERSION}" ChangeLog</command> |
| </commands> |
| </step> |
| <step type="system" stepname="docs:newnews" title="docs:newnews"> |
| <commands> |
| <command>perl dist/extractnews -s ----- -e ----- ChangeLog</command> |
| </commands> |
| </step> |
| <step type="system" stepname="docs:newnews" title="docs:newnews"> |
| <commands> |
| <command>perl dist/extractnews -c CHANGES.new2 -n NEWS.new2 ChangeLog.add</command> |
| </commands> |
| </step> |
| <step type="informational" pause="true" stepname="docs:README-and-NEWS" title="docs:README"> |
| <text> |
| You need to manually insert the relevent portions of |
| 'CHANGES.new' and 'NEWS.new' into the CHANGES and NEWS file. |
| (There are alternative versions in 'CHANGES.new2' and 'NEWS.new2') |
| You may wish to update the README file as well. |
| I'll commit these changes for you afterwards |
| </text> |
| </step> |
| <step prompt="true" type="system" stepname="docs:commit" title="docs:commit"> |
| <commands> |
| <command ignoreerror="1">git commit -m "version update for {VERSION}" README NEWS CHANGES</command> |
| </commands> |
| </step> |
| <step type="system" stepname="release:update" title="release:update"> |
| <text>One more git pull and status to make sure nothing |
| odd exists in your source tree. Please check the results!</text> |
| <commands> |
| <command>git pull</command> |
| <command>git status --porcelain</command> |
| </commands> |
| </step> |
| </steps> |
| </step> |
| |
| <step type="section" title="Make the Release" prompt="yes"> |
| <text>This is it! After this point it's much harder to turn |
| back. If everything is ok until this point and you're ready to |
| actually tag the release in git and make release files, these |
| steps will do that for you. |
| </text> |
| <steps> |
| <step prompt="true" type="system" stepname="release:tag" title="release:tag"> |
| <text> |
| This will actually svn copy the current checked out branch |
| to the new tag name. Specifically: |
| |
| git tag -u A77C5329 -s {VERSIONTAGNAME} -m "Tagging of version {VERSION} as {VERSIONTAGNAME}" |
| </text> |
| <commands> |
| <command>git tag -u A77C5329 -s {VERSIONTAGNAME} -m "Tagging of version {VERSION} as {VERSIONTAGNAME}"</command> |
| </commands> |
| </step> |
| <step prompt="true" type="system" stepname="release:makedist" title="release:makedist"> |
| <commands> |
| <command>git archive --prefix=net-snmp-{VERSION}/ {BRANCHPATH} | tar xf -</command> |
| </commands> |
| </step> |
| <step type="system" stepname="release:removefiles" title="release:removefiles"> |
| <commands> |
| <command>net-snmp-{VERSION}/remove-files net-snmp-{VERSION}</command> |
| </commands> |
| </step> |
| <step type="system" stepname="release:makedist" title="release:makedist"> |
| <commands> |
| <command>star artype=ustar -c -z -f net-snmp-{VERSION}.tar.gz net-snmp-{VERSION}</command> |
| </commands> |
| </step> |
| <step type="system" stepname="release:makezipclean" title="release:makezipclean"> |
| <commands> |
| <command>rm -f net-snmp-{VERSION}.zip</command> |
| </commands> |
| </step> |
| <step type="system" stepname="release:makezip" title="release:makezip"> |
| <commands> |
| <command>zip -r net-snmp-{VERSION}.zip net-snmp-{VERSION}</command> |
| </commands> |
| </step> |
| <step type="system" stepname="release:searching-gpg-keys" title="release:searching-gpg-keys"> |
| <commands> |
| <command>gpg --list-secret-keys net-snmp-admin</command> |
| </commands> |
| </step> |
| <step type="system" stepname="release:gpg" title="release:gpg"> |
| <commands> |
| <command>gpg -u A77C5329 -a --detach-sign net-snmp-{VERSION}.tar.gz</command> |
| </commands> |
| </step> |
| <step type="system" stepname="release:gpg" title="release:gpg"> |
| <commands> |
| <command>gpg -u A77C5329 -a --detach-sign net-snmp-{VERSION}.zip</command> |
| </commands> |
| </step> |
| <step type="command" name="release:nextbranch" title="Don't propagate code modifications" |
| pause="0" mandatory="0"> |
| <text> |
| Mark these code modifications as specific to this particular branch |
| </text> |
| <commands> |
| <command>git checkout {NEXTBRANCH}</command> |
| <command>git merge -s ours -m "Release {VERSION} specific changes" {BRANCHPATH}</command> |
| <command>git checkout {BRANCHPATH}</command> |
| </commands> |
| </step> |
| <step type="command" name="release:push" title="Push the code modifications" |
| pause="0" mandatory="0"> |
| <text> |
| Push the code modifications to the upstream branch |
| </text> |
| <commands> |
| <command>git push</command> |
| <command>git push --tags origin {VERSIONTAGNAME}</command> |
| </commands> |
| </step> |
| |
| <step type="section" title="Release File Test"> |
| <text>We'll also re-build the source and retest a few things to |
| ensure the packaged file can actually be built. |
| </text> |
| <steps> |
| <step type="system" stepname="posttest:untar" title="posttest:untar"> |
| <commands> |
| <command>rm -rf net-snmp-{VERSION}</command> |
| </commands> |
| </step> |
| <step type="system" stepname="posttest:untar" title="posttest:untar"> |
| <commands> |
| <command>tar xzf net-snmp-{VERSION}.tar.gz</command> |
| </commands> |
| </step> |
| <step type="system" stepname="posttest:configure" title="posttest:configure"> |
| <commands> |
| <command>cd net-snmp-{VERSION} && ./configure --cache=config.cache --with-defaults --with-mib-modules='host examples examples/example testhandler smux Rmon disman/event-mib' --with-transports=IPX --enable-ipv6 --enable-embedded-perl --enable-shared</command> |
| </commands> |
| </step> |
| <step type="system" stepname="posttest:make" title="posttest:make"> |
| <commands> |
| <command>cd net-snmp-{VERSION} && make</command> |
| </commands> |
| </step> |
| <step type="system" stepname="posttest:test" title="posttest:test"> |
| <commands> |
| <command>cd net-snmp-{VERSION} && make test</command> |
| </commands> |
| </step> |
| </steps> |
| </step> |
| </steps> |
| </step> |
| <step type="section" title="Release the results"> |
| <text>Now we'll publish the results to the SF server</text> |
| <steps> |
| <step pause="true" type="system" skipif="'{RELEASETYPE}' eq 'full'" |
| stepname="publish:rsync" title="rsync the new files"> |
| <text>This will copy the results to the SF uploads directory |
| in your account on frs.sourceforge.net. The following command |
| is just as an example - this script does *not* upload the |
| files automatically. You must do something like:</text> |
| <commands> |
| <command>echo rsync -v net-snmp-{VERSION}.tar.gz net-snmp-{VERSION}.tar.gz.asc net-snmp-{VERSION}.zip net-snmp-{VERSION}.zip.asc hardaker,net-snmp@frs.sourceforge.net:/home/frs/project/n/ne/net-snmp/net-snmp/{VERSIONTARGET}-pre-releases/</command> |
| </commands> |
| </step> |
| <step pause="true" type="system" skipunless="'{RELEASETYPE}' eq 'full'" |
| stepname="publish:rsync" title="rsync the new files"> |
| <text>This will copy the results to the SF uploads directory |
| in your account on frs.sourceforge.net. The following command |
| is just as an example - this script does *not* upload the |
| files automatically. You must do something like:</text> |
| <commands> |
| <command>echo rsync -v net-snmp-{VERSION}.tar.gz net-snmp-{VERSION}.tar.gz.asc net-snmp-{VERSION}.zip net-snmp-{VERSION}.zip.asc hardaker,net-snmp@frs.sourceforge.net:/home/frs/project/n/ne/net-snmp/net-snmp/{VERSIONTARGET}/</command> |
| </commands> |
| </step> |
| <step type="informational" stepname="publish:editrelease" |
| title="Update the SF release web page"> |
| <text> |
| Update the project download web page (http://www.net-snmp.org/download.html) to mention this new release |
| </text> |
| <!-- Doesn't work |
| <commands> |
| <command>firefox 'http://sourceforge.net/project/admin/editpackages.php?group_id=12694'</command> |
| </commands> |
| --> |
| </step> |
| <step type="system" stepname="publish:editpatches" |
| skipunless="'{RELEASETYPE}' eq 'full'" |
| title="Update the SF Official Patch tracker"> |
| <text> |
| If this the final version of this release, then: |
| Any official patches for the previous release should be re-prioritised to level 5. |
| Any official patches for the earlier releases should be re-prioritised to level 1 and closed. |
| </text> |
| <commands> |
| <command>firefox 'http://www.net-snmp.org/official_patches/'</command> |
| </commands> |
| </step> |
| </steps> |
| </step> |
| <step type="informational"> |
| <text> |
| Binaries: build rpms, .tar.gzs, etc. |
| </text> |
| </step> |
| <step type="Informational" name="cleanup:nsrollup" title="Run nsrollup" |
| pause="1" mandatory="1"> |
| <text> |
| You need to run nsrollup now to sync all the changes we've |
| made into any upstream branches. This will likely cause merge |
| conflicts because of the version number clashes and will need |
| to be resolved. |
| |
| Run (in bash): |
| |
| . local/gittools/shell-functions |
| nsrollup |
| nssync |
| |
| XXX: For conflicts, we can probably pick -s ours but needs to |
| be checked and documented. |
| </text> |
| </step> |
| <step type="section" title="Advertise it!"> |
| <steps> |
| <step type="system" pause="1" title="Add note to the news system"> |
| <text>Add a note to the source forge news system: |
| |
| http://sourceforge.net/news/submit.php?group_id=12694 |
| </text> |
| <commands> |
| <command>echo firefox 'http://sourceforge.net/news/submit.php?group_id=12694'</command> |
| </commands> |
| </step> |
| <step type="informational" pause="1"> |
| <text>Send an announcement message to one of the following |
| mailing lists based on its type: |
| |
| pre: net-snmp-coders@lists.sourceforge.net |
| |
| rc: net-snmp-users@lists.sourceforge.net |
| |
| final: net-snmp-announce@lists.sourceforge.net |
| (one week after the source tarball is made available) |
| </text> |
| </step> |
| <step type="informational" skipunless="'{RELEASETYPE}' eq 'full'" pause="1"> |
| <text>Update the topic on the #Net-SNMP channel if this is a |
| trunk based release. |
| </text> |
| </step> |
| <step type="system" skipunless="'{RELEASETYPE}' eq 'full'" pause="1"> |
| <text>Update the freshmeat listing (Wes needs to do this): |
| |
| http://freshmeat.net/projects/net-snmp/ |
| </text> |
| <commands> |
| <command>echo firefox http://freshmeat.net/projects/net-snmp/</command> |
| </commands> |
| </step> |
| </steps> |
| </step> |
| <step type="informational" skipunless="'{RELEASETYPE}' eq 'full'" pause="1"> |
| <text> |
| Advertise: NEWS upload to sf, publish on -announce, freshmeat, |
| and the GNU FSF directory |
| (http://directory.fsf.org/project/net-snmp/)... |
| (send mail to bug-directory@gnu.org) |
| </text> |
| </step> |
| </steps> |
| </makerelease> |