| #!/bin/sh |
| |
| . ../eval_tools.sh |
| |
| HEADER SNMPv3 agent USM user management with snmpusm |
| |
| SKIPIF NETSNMP_DISABLE_SET_SUPPORT |
| SKIPIFNOT USING_SNMPV3_USMUSER_MODULE |
| SKIPIFNOT NETSNMP_USE_OPENSSL |
| SKIPIFNOT NETSNMP_ENABLE_SCAPI_AUTHPRIV |
| |
| # |
| # Begin test |
| # |
| |
| # standard SNMPv3 USM agent configuration |
| DEFSECURITYLEVEL=authPriv |
| . ./Sv3usmconfigagent |
| |
| # test user |
| NEWUSER=newtestuser |
| NEWAUTHPASS=newauthpass |
| NEWPRIVPASS=newprivpass |
| NEWAUTHPRIVPASS=newauthprivpass |
| |
| # configure agent |
| CONFIGAGENT rwuser $NEWUSER |
| |
| # Start the agent |
| STARTAGENT |
| |
| ## usmUserTable management |
| |
| ## 1) create, clone, test, delete |
| |
| # create new (vanilla) user |
| CAPTURE "snmpusm $SNMP_FLAGS $TESTPRIVARGS $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT create $NEWUSER" |
| CHECKORDIE "User successfully created" |
| |
| # clone |
| CAPTURE "snmpusm $SNMP_FLAGS $TESTPRIVARGS $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT cloneFrom $NEWUSER $TESTPRIVUSER" |
| CHECKORDIE "User successfully cloned" |
| |
| # test (authPriv) |
| CAPTURE "snmpget -On $SNMP_FLAGS -v 3 -u $NEWUSER -l ap -a $DEFAUTHTYPE -A $TESTAUTHPASS -x $DEFPRIVTYPE -X $TESTPRIVPASS $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT .1.3.6.1.2.1.1.3.0" |
| CHECKORDIE ".1.3.6.1.2.1.1.3.0 = Timeticks:" |
| |
| # delete |
| CAPTURE "snmpusm $SNMP_FLAGS $TESTPRIVARGS $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT delete $NEWUSER" |
| CHECKORDIE "User successfully deleted" |
| |
| ## 2) create w/ clone, passwd (auth), passwd (priv), test (authPriv+authNoPriv) |
| |
| # create+clone template user |
| CAPTURE "snmpusm $SNMP_FLAGS $TESTPRIVARGS $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT create $NEWUSER $TESTPRIVUSER2" |
| CHECKORDIE "User successfully created" |
| |
| # change auth passphrase of new user |
| CAPTURE "snmpusm $SNMP_FLAGS $TESTPRIVARGS -Ca $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT passwd $TESTAUTHPASS2 $NEWAUTHPASS $NEWUSER" |
| CHECKORDIE "SNMPv3 Key(s) successfully changed" |
| |
| # change priv passphrase of new user |
| CAPTURE "snmpusm $SNMP_FLAGS $TESTPRIVARGS -Cx $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT passwd $TESTPRIVPASS2 $NEWPRIVPASS $NEWUSER" |
| CHECKORDIE "SNMPv3 Key(s) successfully changed" |
| |
| # test (authNoPriv) |
| CAPTURE "snmpget -On $SNMP_FLAGS -v 3 -u $NEWUSER -l anp -a $DEFAUTHTYPE -A $NEWAUTHPASS $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT .1.3.6.1.2.1.1.3.0" |
| CHECKORDIE ".1.3.6.1.2.1.1.3.0 = Timeticks:" |
| |
| # test (authPriv) |
| CAPTURE "snmpget -On $SNMP_FLAGS -v 3 -u $NEWUSER -l ap -a $DEFAUTHTYPE -A $NEWAUTHPASS -x $DEFPRIVTYPE -X $NEWPRIVPASS $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT .1.3.6.1.2.1.1.3.0" |
| CHECKORDIE ".1.3.6.1.2.1.1.3.0 = Timeticks:" |
| |
| ## 3) passwd (priv), passwd (auth+priv), test |
| |
| # change priv passphrase (to auth passphrase) by the user himself |
| CAPTURE "snmpusm $SNMP_FLAGS -v 3 -u $NEWUSER -l ap -a $DEFAUTHTYPE -A $NEWAUTHPASS -x $DEFPRIVTYPE -X $NEWPRIVPASS -Cx $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT passwd $NEWPRIVPASS $NEWAUTHPASS" |
| CHECKORDIE "SNMPv3 Key(s) successfully changed" |
| |
| # change both passphrases at once |
| CAPTURE "snmpusm $SNMP_FLAGS -v 3 -u $NEWUSER -l ap -a $DEFAUTHTYPE -A $NEWAUTHPASS -x $DEFPRIVTYPE -X $NEWAUTHPASS $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT passwd $NEWAUTHPASS $NEWAUTHPRIVPASS" |
| CHECKORDIE "SNMPv3 Key(s) successfully changed" |
| |
| # test (authPriv) |
| CAPTURE "snmpget -On $SNMP_FLAGS -v 3 -u $NEWUSER -l ap -a $DEFAUTHTYPE -A $NEWAUTHPRIVPASS -x $DEFPRIVTYPE -X $NEWAUTHPRIVPASS $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT .1.3.6.1.2.1.1.3.0" |
| CHECKORDIE ".1.3.6.1.2.1.1.3.0 = Timeticks:" |
| |
| ## 5) persistency I: reconfigure (SIGHUP), re-test |
| |
| if ISDEFINED HAVE_SIGHUP; then |
| |
| HUPAGENT |
| DELAY |
| |
| # test (authPriv) |
| CAPTURE "snmpget -On $SNMP_FLAGS -v 3 -u $NEWUSER -l ap -a $DEFAUTHTYPE -A $NEWAUTHPRIVPASS -x $DEFPRIVTYPE -X $NEWAUTHPRIVPASS $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT .1.3.6.1.2.1.1.3.0" |
| CHECKORDIE ".1.3.6.1.2.1.1.3.0 = Timeticks:" |
| |
| ## 5) persistency II: stop, start, re-test |
| |
| STOPAGENT |
| DELAY |
| # make sure it picks up persistent config and uses a new logfile |
| SNMPCONFPATH="${SNMP_TMPDIR}${SNMP_ENV_SEPARATOR}${SNMP_TMP_PERSISTENTDIR}" |
| export SNMPCONFPATH |
| SNMP_CONFIG_FILE="does-not-exist" |
| SNMP_SNMPD_LOG_FILE=${SNMP_TMPDIR}/snmpd2.log |
| STARTAGENT |
| |
| # test (authPriv) |
| CAPTURE "snmpget -On $SNMP_FLAGS -v 3 -u $NEWUSER -l ap -a $DEFAUTHTYPE -A $NEWAUTHPRIVPASS -x $DEFPRIVTYPE -X $NEWAUTHPRIVPASS $SNMP_TRANSPORT_SPEC:$SNMP_TEST_DEST$SNMP_SNMPD_PORT .1.3.6.1.2.1.1.3.0" |
| CHECKORDIE ".1.3.6.1.2.1.1.3.0 = Timeticks:" |
| |
| fi |
| |
| ## stop agent and finish |
| STOPAGENT |
| FINISHED |
