| /* |
| * Abstract Syntax Notation One, ASN.1 |
| * As defined in ISO/IS 8824 and ISO/IS 8825 |
| * This implements a subset of the above International Standards that |
| * is sufficient to implement SNMP. |
| * |
| * Encodes abstract data types into a machine independent stream of bytes. |
| * |
| */ |
| /********************************************************************** |
| Copyright 1988, 1989, 1991, 1992 by Carnegie Mellon University |
| |
| All Rights Reserved |
| |
| Permission to use, copy, modify, and distribute this software and its |
| documentation for any purpose and without fee is hereby granted, |
| provided that the above copyright notice appear in all copies and that |
| both that copyright notice and this permission notice appear in |
| supporting documentation, and that the name of CMU not be |
| used in advertising or publicity pertaining to distribution of the |
| software without specific, written prior permission. |
| |
| CMU DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING |
| ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL |
| CMU BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR |
| ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, |
| WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, |
| ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS |
| SOFTWARE. |
| ******************************************************************/ |
| /** |
| * @defgroup asn1_packet_parse asn1 parsing and datatype manipulation routines. |
| * @ingroup library |
| * |
| * @{ |
| * |
| * Note on |
| * |
| * Re-allocating reverse ASN.1 encoder functions. Synopsis: |
| * |
| * \code |
| * |
| * u_char *buf = (u_char*)malloc(100); |
| * u_char type = (ASN_UNIVERSAL | ASN_PRIMITIVE | ASN_INTEGER); |
| * size_t buf_len = 100, offset = 0; |
| * long data = 12345; |
| * int allow_realloc = 1; |
| * |
| * if (asn_realloc_rbuild_int(&buf, &buf_len, &offset, allow_realloc, |
| * type, &data, sizeof(long)) == 0) { |
| * error; |
| * } |
| * |
| * \endcode |
| * |
| * NOTE WELL: after calling one of these functions with allow_realloc |
| * non-zero, buf might have moved, buf_len might have grown and |
| * offset will have increased by the size of the encoded data. |
| * You should **NEVER** do something like this: |
| * |
| * \code |
| * |
| * u_char *buf = (u_char *)malloc(100), *ptr; |
| * u_char type = (ASN_UNIVERSAL | ASN_PRIMITIVE | ASN_INTEGER); |
| * size_t buf_len = 100, offset = 0; |
| * long data1 = 1234, data2 = 5678; |
| * int rc = 0, allow_realloc = 1; |
| * |
| * rc = asn_realloc_rbuild_int(&buf, &buf_len, &offset, allow_realloc, |
| * type, &data1, sizeof(long)); |
| * ptr = buf[buf_len - offset]; / * points at encoding of data1 * / |
| * if (rc == 0) { |
| * error; |
| * } |
| * rc = asn_realloc_rbuild_int(&buf, &buf_len, &offset, allow_realloc, |
| * type, &data2, sizeof(long)); |
| * make use of ptr here; |
| * |
| * \endcode |
| * |
| * ptr is **INVALID** at this point. In general, you should store the |
| * offset value and compute pointers when you need them: |
| * |
| * |
| * \code |
| * |
| * u_char *buf = (u_char *)malloc(100), *ptr; |
| * u_char type = (ASN_UNIVERSAL | ASN_PRIMITIVE | ASN_INTEGER); |
| * size_t buf_len = 100, offset = 0, ptr_offset; |
| * long data1 = 1234, data2 = 5678; |
| * int rc = 0, allow_realloc = 1; |
| * |
| * rc = asn_realloc_rbuild_int(&buf, &buf_len, &offset, allow_realloc, |
| * type, &data1, sizeof(long)); |
| * ptr_offset = offset; |
| * if (rc == 0) { |
| * error; |
| * } |
| * rc = asn_realloc_rbuild_int(&buf, &buf_len, &offset, allow_realloc, |
| * type, &data2, sizeof(long)); |
| * ptr = buf + buf_len - ptr_offset |
| * make use of ptr here; |
| * |
| * \endcode |
| * |
| * |
| * Here, you can see that ptr will be a valid pointer even if the block of |
| * memory has been moved, as it may well have been. Plenty of examples of |
| * usage all over asn1.c, snmp_api.c, snmpusm.c. |
| * |
| * The other thing you should **NEVER** do is to pass a pointer to a buffer |
| * on the stack as the first argument when allow_realloc is non-zero, unless |
| * you really know what you are doing and your machine/compiler allows you to |
| * free non-heap memory. There are rumours that such things exist, but many |
| * consider them no more than the wild tales of a fool. |
| * |
| * Of course, you can pass allow_realloc as zero, to indicate that you do not |
| * wish the packet buffer to be reallocated for some reason; perhaps because |
| * it is on the stack. This may be useful to emulate the functionality of |
| * the old API: |
| * |
| * \code |
| * |
| * u_char my_static_buffer[100], *cp = NULL; |
| * size_t my_static_buffer_len = 100; |
| * float my_pi = (float)22/(float)7; |
| * |
| * cp = asn_rbuild_float(my_static_buffer, &my_static_buffer_len, |
| * ASN_OPAQUE_FLOAT, &my_pi, sizeof(float)); |
| * if (cp == NULL) { |
| * error; |
| * } |
| * |
| * \endcode |
| * |
| * IS EQUIVALENT TO: |
| * |
| * \code |
| * |
| * u_char my_static_buffer[100]; |
| * size_t my_static_buffer_len = 100, my_offset = 0; |
| * float my_pi = (float)22/(float)7; |
| * int rc = 0; |
| * |
| * rc = asn_realloc_rbuild_float(&my_static_buffer, &my_static_buffer_len, |
| * &my_offset, 0, |
| * ASN_OPAQUE_FLOAT, &my_pi, sizeof(float)); |
| * if (rc == 0) { |
| * error; |
| * } |
| * \endcode |
| * |
| */ |
| |
| |
| #include <net-snmp/net-snmp-config.h> |
| |
| #ifdef KINETICS |
| #include "gw.h" |
| #endif |
| |
| #if HAVE_STRING_H |
| #include <string.h> |
| #else |
| #include <strings.h> |
| #endif |
| |
| #include <sys/types.h> |
| #include <stdio.h> |
| #ifdef HAVE_STDLIB_H |
| #include <stdlib.h> |
| #endif |
| #if HAVE_WINSOCK_H |
| #include <winsock.h> |
| #endif |
| #if HAVE_NETINET_IN_H |
| #include <netinet/in.h> |
| #endif |
| |
| #ifdef vms |
| #include <in.h> |
| #endif |
| |
| #if HAVE_DMALLOC_H |
| #include <dmalloc.h> |
| #endif |
| |
| #include <net-snmp/output_api.h> |
| #include <net-snmp/utilities.h> |
| |
| #include <net-snmp/library/asn1.h> |
| #include <net-snmp/library/int64.h> |
| #include <net-snmp/library/mib.h> |
| |
| #ifndef NULL |
| #define NULL 0 |
| #endif |
| |
| #include <net-snmp/library/snmp_api.h> |
| |
| #ifndef INT32_MAX |
| # define INT32_MAX 2147483647 |
| #endif |
| |
| #ifndef INT32_MIN |
| # define INT32_MIN (0 - INT32_MAX - 1) |
| #endif |
| |
| |
| #if SIZEOF_LONG == 4 |
| # define CHECK_OVERFLOW_S(x,y) |
| # define CHECK_OVERFLOW_U(x,y) |
| #else |
| # define CHECK_OVERFLOW_S(x,y) do { \ |
| if (x > INT32_MAX) { \ |
| DEBUGMSG(("asn","truncating signed value %ld to 32 bits (%d)\n",(long)(x),y)); \ |
| x &= 0xffffffff; \ |
| } else if (x < INT32_MIN) { \ |
| DEBUGMSG(("asn","truncating signed value %ld to 32 bits (%d)\n",(long)(x),y)); \ |
| x = 0 - (x & 0xffffffff); \ |
| } \ |
| } while(0) |
| |
| # define CHECK_OVERFLOW_U(x,y) do { \ |
| if (x > UINT32_MAX) { \ |
| x &= 0xffffffff; \ |
| DEBUGMSG(("asn","truncating unsigned value to 32 bits (%d)\n",y)); \ |
| } \ |
| } while(0) |
| #endif |
| |
| /** |
| * @internal |
| * output an error for a wrong size |
| * |
| * @param str error string |
| * @param wrongsize wrong size |
| * @param rightsize expected size |
| */ |
| static |
| void |
| _asn_size_err(const char *str, size_t wrongsize, size_t rightsize) |
| { |
| char ebuf[128]; |
| |
| snprintf(ebuf, sizeof(ebuf), |
| "%s size %lu: s/b %lu", str, |
| (unsigned long)wrongsize, (unsigned long)rightsize); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| } |
| |
| /** |
| * @internal |
| * output an error for a wrong length |
| * |
| * @param str error string |
| * @param wrongsize wrong length |
| * @param rightsize expected length |
| */ |
| static |
| void |
| _asn_length_err(const char *str, size_t wrongsize, size_t rightsize) |
| { |
| char ebuf[128]; |
| |
| snprintf(ebuf, sizeof(ebuf), |
| "%s length %lu too large: exceeds %lu", str, |
| (unsigned long)wrongsize, (unsigned long)rightsize); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| } |
| |
| /** |
| * @internal |
| * call after asn_parse_length to verify result. |
| * |
| * @param str error string |
| * @param bufp start of buffer |
| * @param data start of data |
| * @param plen ? |
| * @param dlen ? |
| * |
| * @return 1 on error 0 on success |
| */ |
| static |
| int |
| _asn_parse_length_check(const char *str, |
| const u_char * bufp, const u_char * data, |
| u_long plen, size_t dlen) |
| { |
| char ebuf[128]; |
| size_t header_len; |
| |
| if (bufp == NULL) { |
| /* |
| * error message is set |
| */ |
| return 1; |
| } |
| header_len = bufp - data; |
| if (plen > 0x7fffffff || header_len > 0x7fffffff || |
| ((size_t) plen + header_len) > dlen) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: message overflow: %d len + %d delta > %d len", |
| str, (int) plen, (int) header_len, (int) dlen); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return 1; |
| } |
| return 0; |
| } |
| |
| |
| /** |
| * @internal |
| * call after asn_build_header to verify result. |
| * |
| * @param str error string to output |
| * @param data data pointer to verify (NULL => error ) |
| * @param datalen data len to check |
| * @param typedlen type length |
| * |
| * @return 0 on success, 1 on error |
| */ |
| static |
| int |
| _asn_build_header_check(const char *str, const u_char * data, |
| size_t datalen, size_t typedlen) |
| { |
| char ebuf[128]; |
| |
| if (data == NULL) { |
| /* |
| * error message is set |
| */ |
| return 1; |
| } |
| if (datalen < typedlen) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: bad header, length too short: %lu < %lu", str, |
| (unsigned long)datalen, (unsigned long)typedlen); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return 1; |
| } |
| return 0; |
| } |
| |
| /** |
| * @internal |
| * call after asn_build_header to verify result. |
| * |
| * @param str error string |
| * @param pkt packet to check |
| * @param pkt_len length of the packet |
| * @param typedlen length of the type |
| * |
| * @return 0 on success 1 on error |
| */ |
| static |
| int |
| _asn_realloc_build_header_check(const char *str, |
| u_char ** pkt, |
| const size_t * pkt_len, size_t typedlen) |
| { |
| char ebuf[128]; |
| |
| if (pkt == NULL || *pkt == NULL) { |
| /* |
| * Error message is set. |
| */ |
| return 1; |
| } |
| |
| if (*pkt_len < typedlen) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: bad header, length too short: %lu < %lu", str, |
| (unsigned long)*pkt_len, (unsigned long)typedlen); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return 1; |
| } |
| return 0; |
| } |
| |
| /** |
| * @internal |
| * checks the incoming packet for validity and returns its size or 0 |
| * |
| * @param pkt The packet |
| * @param len The length to check |
| * |
| * @return The size of the packet if valid; 0 otherwise |
| */ |
| int |
| asn_check_packet(u_char * pkt, size_t len) |
| { |
| u_long asn_length; |
| |
| if (len < 2) |
| return 0; /* always too short */ |
| |
| if (*pkt != (u_char) (ASN_SEQUENCE | ASN_CONSTRUCTOR)) |
| return -1; /* wrong type */ |
| |
| if (*(pkt + 1) & 0x80) { |
| /* |
| * long length |
| */ |
| if ((int) len < (int) (*(pkt + 1) & ~0x80) + 2) |
| return 0; /* still to short, incomplete length */ |
| asn_parse_length(pkt + 1, &asn_length); |
| return (asn_length + 2 + (*(pkt + 1) & ~0x80)); |
| } else { |
| /* |
| * short length |
| */ |
| return (*(pkt + 1) + 2); |
| } |
| } |
| |
| static |
| int |
| _asn_bitstring_check(const char *str, size_t asn_length, u_char datum) |
| { |
| char ebuf[128]; |
| |
| if (asn_length < 1) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: length %d too small", str, (int) asn_length); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return 1; |
| } |
| /* |
| * if (datum > 7){ |
| * sprintf(ebuf,"%s: datum %d >7: too large", str, (int)(datum)); |
| * ERROR_MSG(ebuf); |
| * return 1; |
| * } |
| */ |
| return 0; |
| } |
| |
| /** |
| * @internal |
| * asn_parse_int - pulls a long out of an int type. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the end of this object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type OUT - asn type of object |
| * @param intp IN/OUT - pointer to start of output buffer |
| * @param intsize IN - size of output buffer |
| * |
| * @return pointer to the first byte past the end |
| * of this object (i.e. the start of the next object) Returns NULL on any error |
| */ |
| u_char * |
| asn_parse_int(u_char * data, |
| size_t * datalength, |
| u_char * type, long *intp, size_t intsize) |
| { |
| /* |
| * ASN.1 integer ::= 0x02 asnlength byte {byte}* |
| */ |
| static const char *errpre = "parse int"; |
| register u_char *bufp = data; |
| u_long asn_length; |
| register long value = 0; |
| |
| if (intsize != sizeof(long)) { |
| _asn_size_err(errpre, intsize, sizeof(long)); |
| return NULL; |
| } |
| *type = *bufp++; |
| bufp = asn_parse_length(bufp, &asn_length); |
| if (_asn_parse_length_check |
| (errpre, bufp, data, asn_length, *datalength)) |
| return NULL; |
| |
| if ((size_t) asn_length > intsize) { |
| _asn_length_err(errpre, (size_t) asn_length, intsize); |
| return NULL; |
| } |
| |
| *datalength -= (int) asn_length + (bufp - data); |
| if (*bufp & 0x80) |
| value = -1; /* integer is negative */ |
| |
| DEBUGDUMPSETUP("recv", data, bufp - data + asn_length); |
| |
| while (asn_length--) |
| value = (value << 8) | *bufp++; |
| |
| CHECK_OVERFLOW_S(value,1); |
| |
| DEBUGMSG(("dumpv_recv", " Integer:\t%ld (0x%.2X)\n", value, value)); |
| |
| *intp = value; |
| return bufp; |
| } |
| |
| |
| /** |
| * @internal |
| * asn_parse_unsigned_int - pulls an unsigned long out of an ASN int type. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the end of this object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type OUT - asn type of object |
| * @param intp IN/OUT - pointer to start of output buffer |
| * @param intsize IN - size of output buffer |
| * |
| * @return pointer to the first byte past the end |
| * of this object (i.e. the start of the next object) Returns NULL on any error |
| */ |
| u_char * |
| asn_parse_unsigned_int(u_char * data, |
| size_t * datalength, |
| u_char * type, u_long * intp, size_t intsize) |
| { |
| /* |
| * ASN.1 integer ::= 0x02 asnlength byte {byte}* |
| */ |
| static const char *errpre = "parse uint"; |
| register u_char *bufp = data; |
| u_long asn_length; |
| register u_long value = 0; |
| |
| if (intsize != sizeof(long)) { |
| _asn_size_err(errpre, intsize, sizeof(long)); |
| return NULL; |
| } |
| *type = *bufp++; |
| bufp = asn_parse_length(bufp, &asn_length); |
| if (_asn_parse_length_check |
| (errpre, bufp, data, asn_length, *datalength)) |
| return NULL; |
| |
| if (((int) asn_length > (intsize + 1)) || |
| (((int) asn_length == intsize + 1) && *bufp != 0x00)) { |
| _asn_length_err(errpre, (size_t) asn_length, intsize); |
| return NULL; |
| } |
| *datalength -= (int) asn_length + (bufp - data); |
| if (*bufp & 0x80) |
| value = ~value; /* integer is negative */ |
| |
| DEBUGDUMPSETUP("recv", data, bufp - data + asn_length); |
| |
| while (asn_length--) |
| value = (value << 8) | *bufp++; |
| |
| CHECK_OVERFLOW_U(value,2); |
| |
| DEBUGMSG(("dumpv_recv", " UInteger:\t%ld (0x%.2X)\n", value, value)); |
| |
| *intp = value; |
| return bufp; |
| } |
| |
| |
| /** |
| * @internal |
| * asn_build_int - builds an ASN object containing an integer. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the end of this object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * |
| * @param data IN - pointer to start of output buffer |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type IN - asn type of objec |
| * @param intp IN - pointer to start of long integer |
| * @param intsize IN - size of input buffer |
| * |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_build_int(u_char * data, |
| size_t * datalength, u_char type, const long *intp, size_t intsize) |
| { |
| /* |
| * ASN.1 integer ::= 0x02 asnlength byte {byte}* |
| */ |
| static const char *errpre = "build int"; |
| register long integer; |
| register u_long mask; |
| #ifndef NETSNMP_NO_DEBUGGING |
| u_char *initdatap = data; |
| #endif |
| |
| if (intsize != sizeof(long)) { |
| _asn_size_err(errpre, intsize, sizeof(long)); |
| return NULL; |
| } |
| integer = *intp; |
| CHECK_OVERFLOW_S(integer,3); |
| /* |
| * Truncate "unnecessary" bytes off of the most significant end of this |
| * 2's complement integer. There should be no sequence of 9 |
| * consecutive 1's or 0's at the most significant end of the |
| * integer. |
| */ |
| mask = ((u_long) 0x1FF) << ((8 * (sizeof(long) - 1)) - 1); |
| /* |
| * mask is 0xFF800000 on a big-endian machine |
| */ |
| while ((((integer & mask) == 0) || ((integer & mask) == mask)) |
| && intsize > 1) { |
| intsize--; |
| integer <<= 8; |
| } |
| data = asn_build_header(data, datalength, type, intsize); |
| if (_asn_build_header_check(errpre, data, *datalength, intsize)) |
| return NULL; |
| |
| *datalength -= intsize; |
| mask = ((u_long) 0xFF) << (8 * (sizeof(long) - 1)); |
| /* |
| * mask is 0xFF000000 on a big-endian machine |
| */ |
| while (intsize--) { |
| *data++ = (u_char) ((integer & mask) >> (8 * (sizeof(long) - 1))); |
| integer <<= 8; |
| } |
| DEBUGDUMPSETUP("send", initdatap, data - initdatap); |
| DEBUGMSG(("dumpv_send", " Integer:\t%ld (0x%.2X)\n", *intp, *intp)); |
| return data; |
| } |
| |
| |
| |
| /** |
| * @internal |
| * asn_build_unsigned_int - builds an ASN object containing an integer. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the end of this object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * |
| * @param data IN - pointer to start of output buffer |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type IN - asn type of objec |
| * @param intp IN - pointer to start of long integer |
| * @param intsize IN - size of input buffer |
| * |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_build_unsigned_int(u_char * data, |
| size_t * datalength, |
| u_char type, const u_long * intp, size_t intsize) |
| { |
| /* |
| * ASN.1 integer ::= 0x02 asnlength byte {byte}* |
| */ |
| static const char *errpre = "build uint"; |
| register u_long integer; |
| register u_long mask; |
| int add_null_byte = 0; |
| #ifndef NETSNMP_NO_DEBUGGING |
| u_char *initdatap = data; |
| #endif |
| |
| if (intsize != sizeof(long)) { |
| _asn_size_err(errpre, intsize, sizeof(long)); |
| return NULL; |
| } |
| integer = *intp; |
| CHECK_OVERFLOW_U(integer,4); |
| |
| mask = ((u_long) 0xFF) << (8 * (sizeof(long) - 1)); |
| /* |
| * mask is 0xFF000000 on a big-endian machine |
| */ |
| if ((u_char) ((integer & mask) >> (8 * (sizeof(long) - 1))) & 0x80) { |
| /* |
| * if MSB is set |
| */ |
| add_null_byte = 1; |
| intsize++; |
| } else { |
| /* |
| * Truncate "unnecessary" bytes off of the most significant end of this 2's complement integer. |
| * There should be no sequence of 9 consecutive 1's or 0's at the most significant end of the |
| * integer. |
| */ |
| mask = ((u_long) 0x1FF) << ((8 * (sizeof(long) - 1)) - 1); |
| /* |
| * mask is 0xFF800000 on a big-endian machine |
| */ |
| while ((((integer & mask) == 0) || ((integer & mask) == mask)) |
| && intsize > 1) { |
| intsize--; |
| integer <<= 8; |
| } |
| } |
| data = asn_build_header(data, datalength, type, intsize); |
| if (_asn_build_header_check(errpre, data, *datalength, intsize)) |
| return NULL; |
| |
| *datalength -= intsize; |
| if (add_null_byte == 1) { |
| *data++ = '\0'; |
| intsize--; |
| } |
| mask = ((u_long) 0xFF) << (8 * (sizeof(long) - 1)); |
| /* |
| * mask is 0xFF000000 on a big-endian machine |
| */ |
| while (intsize--) { |
| *data++ = (u_char) ((integer & mask) >> (8 * (sizeof(long) - 1))); |
| integer <<= 8; |
| } |
| DEBUGDUMPSETUP("send", initdatap, data - initdatap); |
| DEBUGMSG(("dumpv_send", " UInteger:\t%ld (0x%.2X)\n", *intp, *intp)); |
| return data; |
| } |
| |
| |
| /** |
| * @internal |
| * asn_parse_string - pulls an octet string out of an ASN octet string type. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the beginning of the next object. |
| * |
| * "string" is filled with the octet string. |
| * ASN.1 octet string ::= primstring | cmpdstring |
| * primstring ::= 0x04 asnlength byte {byte}* |
| * cmpdstring ::= 0x24 asnlength string {string}* |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type OUT - asn type of object |
| * @param string IN/OUT - pointer to start of output buffer |
| * @param strlength IN/OUT - size of output buffer |
| * |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| |
| u_char * |
| asn_parse_string(u_char * data, |
| size_t * datalength, |
| u_char * type, u_char * str, size_t * strlength) |
| { |
| static const char *errpre = "parse string"; |
| u_char *bufp = data; |
| u_long asn_length; |
| |
| *type = *bufp++; |
| bufp = asn_parse_length(bufp, &asn_length); |
| if (_asn_parse_length_check |
| (errpre, bufp, data, asn_length, *datalength)) { |
| return NULL; |
| } |
| |
| if ((int) asn_length > *strlength) { |
| _asn_length_err(errpre, (size_t) asn_length, *strlength); |
| return NULL; |
| } |
| |
| DEBUGDUMPSETUP("recv", data, bufp - data + asn_length); |
| |
| memmove(str, bufp, asn_length); |
| if (*strlength > (int) asn_length) |
| str[asn_length] = 0; |
| *strlength = (int) asn_length; |
| *datalength -= (int) asn_length + (bufp - data); |
| |
| DEBUGIF("dumpv_recv") { |
| u_char *buf = (u_char *) malloc(1 + asn_length); |
| size_t l = (buf != NULL) ? (1 + asn_length) : 0, ol = 0; |
| |
| if (sprint_realloc_asciistring |
| (&buf, &l, &ol, 1, str, asn_length)) { |
| DEBUGMSG(("dumpv_recv", " String:\t%s\n", buf)); |
| } else { |
| if (buf == NULL) { |
| DEBUGMSG(("dumpv_recv", " String:\t[TRUNCATED]\n")); |
| } else { |
| DEBUGMSG(("dumpv_recv", " String:\t%s [TRUNCATED]\n", |
| buf)); |
| } |
| } |
| if (buf != NULL) { |
| free(buf); |
| } |
| } |
| |
| return bufp + asn_length; |
| } |
| |
| |
| /** |
| * @internal |
| * asn_build_string - Builds an ASN octet string object containing the input string. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the beginning of the next object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type IN - asn type of object |
| * @param string IN - pointer to start of input buffer |
| * @param strlength IN - size of input buffer |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| |
| u_char * |
| asn_build_string(u_char * data, |
| size_t * datalength, |
| u_char type, const u_char * str, size_t strlength) |
| { |
| /* |
| * ASN.1 octet string ::= primstring | cmpdstring |
| * primstring ::= 0x04 asnlength byte {byte}* |
| * cmpdstring ::= 0x24 asnlength string {string}* |
| * This code will never send a compound string. |
| */ |
| #ifndef NETSNMP_NO_DEBUGGING |
| u_char *initdatap = data; |
| #endif |
| data = asn_build_header(data, datalength, type, strlength); |
| if (_asn_build_header_check |
| ("build string", data, *datalength, strlength)) |
| return NULL; |
| |
| if (strlength) { |
| if (str == NULL) { |
| memset(data, 0, strlength); |
| } else { |
| memmove(data, str, strlength); |
| } |
| } |
| *datalength -= strlength; |
| DEBUGDUMPSETUP("send", initdatap, data - initdatap + strlength); |
| DEBUGIF("dumpv_send") { |
| u_char *buf = (u_char *) malloc(1 + strlength); |
| size_t l = (buf != NULL) ? (1 + strlength) : 0, ol = 0; |
| |
| if (sprint_realloc_asciistring |
| (&buf, &l, &ol, 1, str, strlength)) { |
| DEBUGMSG(("dumpv_send", " String:\t%s\n", buf)); |
| } else { |
| if (buf == NULL) { |
| DEBUGMSG(("dumpv_send", " String:\t[TRUNCATED]\n")); |
| } else { |
| DEBUGMSG(("dumpv_send", " String:\t%s [TRUNCATED]\n", |
| buf)); |
| } |
| } |
| if (buf != NULL) { |
| free(buf); |
| } |
| } |
| return data + strlength; |
| } |
| |
| |
| |
| /** |
| * @internal |
| * asn_parse_header - interprets the ID and length of the current object. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * in this object following the id and length. |
| * |
| * Returns a pointer to the first byte of the contents of this object. |
| * Returns NULL on any error. |
| * |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type OUT - asn type of object |
| * @return Returns a pointer to the first byte of the contents of this object. |
| * Returns NULL on any error. |
| * |
| */ |
| u_char * |
| asn_parse_header(u_char * data, size_t * datalength, u_char * type) |
| { |
| register u_char *bufp; |
| u_long asn_length; |
| |
| if (!data || !datalength || !type) { |
| ERROR_MSG("parse header: NULL pointer"); |
| return NULL; |
| } |
| bufp = data; |
| /* |
| * this only works on data types < 30, i.e. no extension octets |
| */ |
| if (IS_EXTENSION_ID(*bufp)) { |
| ERROR_MSG("can't process ID >= 30"); |
| return NULL; |
| } |
| *type = *bufp; |
| bufp = asn_parse_length(bufp + 1, &asn_length); |
| |
| if (_asn_parse_length_check |
| ("parse header", bufp, data, asn_length, *datalength)) |
| return NULL; |
| |
| #ifdef DUMP_PRINT_HEADERS |
| DEBUGDUMPSETUP("recv", data, (bufp - data)); |
| DEBUGMSG(("dumpv_recv", " Header: 0x%.2X, len = %d (0x%X)\n", *data, |
| asn_length, asn_length)); |
| #else |
| /* |
| * DEBUGMSGHEXTLI(("recv",data,(bufp-data))); |
| * DEBUGMSG(("dumpH_recv","\n")); |
| */ |
| #endif |
| |
| #ifdef NETSNMP_WITH_OPAQUE_SPECIAL_TYPES |
| |
| if ((*type == ASN_OPAQUE) && (*bufp == ASN_OPAQUE_TAG1)) { |
| |
| /* |
| * check if 64-but counter |
| */ |
| switch (*(bufp + 1)) { |
| case ASN_OPAQUE_COUNTER64: |
| case ASN_OPAQUE_U64: |
| case ASN_OPAQUE_FLOAT: |
| case ASN_OPAQUE_DOUBLE: |
| case ASN_OPAQUE_I64: |
| *type = *(bufp + 1); |
| break; |
| |
| default: |
| /* |
| * just an Opaque |
| */ |
| *datalength = (int) asn_length; |
| return bufp; |
| } |
| /* |
| * value is encoded as special format |
| */ |
| bufp = asn_parse_length(bufp + 2, &asn_length); |
| if (_asn_parse_length_check("parse opaque header", bufp, data, |
| asn_length, *datalength)) |
| return NULL; |
| } |
| #endif /* NETSNMP_WITH_OPAQUE_SPECIAL_TYPES */ |
| |
| *datalength = (int) asn_length; |
| |
| return bufp; |
| } |
| |
| /** |
| * @internal |
| * same as asn_parse_header with test for expected type |
| * |
| * @see asn_parse_header |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type OUT - asn type of object |
| * @param expected_type IN expected type |
| * @return Returns a pointer to the first byte of the contents of this object. |
| * Returns NULL on any error. |
| * |
| */ |
| u_char * |
| asn_parse_sequence(u_char * data, size_t * datalength, u_char * type, u_char expected_type, /* must be this type */ |
| const char *estr) |
| { /* error message prefix */ |
| data = asn_parse_header(data, datalength, type); |
| if (data && (*type != expected_type)) { |
| char ebuf[128]; |
| snprintf(ebuf, sizeof(ebuf), |
| "%s header type %02X: s/b %02X", estr, |
| (u_char) * type, (u_char) expected_type); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return NULL; |
| } |
| return data; |
| } |
| |
| |
| |
| /** |
| * @internal |
| * asn_build_header - builds an ASN header for an object with the ID and |
| * length specified. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * in this object following the id and length. |
| * |
| * This only works on data types < 30, i.e. no extension octets. |
| * The maximum length is 0xFFFF; |
| * |
| * Returns a pointer to the first byte of the contents of this object. |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type IN - asn type of object |
| * @param length IN - length of object |
| * @return Returns a pointer to the first byte of the contents of this object. |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_build_header(u_char * data, |
| size_t * datalength, u_char type, size_t length) |
| { |
| char ebuf[128]; |
| |
| if (*datalength < 1) { |
| snprintf(ebuf, sizeof(ebuf), |
| "bad header length < 1 :%lu, %lu", |
| (unsigned long)*datalength, (unsigned long)length); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return NULL; |
| } |
| *data++ = type; |
| (*datalength)--; |
| return asn_build_length(data, datalength, length); |
| } |
| |
| /** |
| * @internal |
| * asn_build_sequence - builds an ASN header for a sequence with the ID and |
| * |
| * length specified. |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * in this object following the id and length. |
| * |
| * This only works on data types < 30, i.e. no extension octets. |
| * The maximum length is 0xFFFF; |
| * |
| * Returns a pointer to the first byte of the contents of this object. |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type IN - asn type of object |
| * @param length IN - length of object |
| * |
| * @return Returns a pointer to the first byte of the contents of this object. |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_build_sequence(u_char * data, |
| size_t * datalength, u_char type, size_t length) |
| { |
| static const char *errpre = "build seq"; |
| char ebuf[128]; |
| |
| if (*datalength < 4) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: length %d < 4: PUNT", errpre, |
| (int) *datalength); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return NULL; |
| } |
| *datalength -= 4; |
| *data++ = type; |
| *data++ = (u_char) (0x02 | ASN_LONG_LEN); |
| *data++ = (u_char) ((length >> 8) & 0xFF); |
| *data++ = (u_char) (length & 0xFF); |
| return data; |
| } |
| |
| /** |
| * @internal |
| * asn_parse_length - interprets the length of the current object. |
| * |
| * On exit, length contains the value of this length field. |
| * |
| * Returns a pointer to the first byte after this length |
| * field (aka: the start of the data field). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of length field |
| * @param length OUT - value of length field |
| * |
| * @return Returns a pointer to the first byte after this length |
| * field (aka: the start of the data field). |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_parse_length(u_char * data, u_long * length) |
| { |
| static const char *errpre = "parse length"; |
| char ebuf[128]; |
| register u_char lengthbyte; |
| |
| if (!data || !length) { |
| ERROR_MSG("parse length: NULL pointer"); |
| return NULL; |
| } |
| lengthbyte = *data; |
| |
| if (lengthbyte & ASN_LONG_LEN) { |
| lengthbyte &= ~ASN_LONG_LEN; /* turn MSb off */ |
| if (lengthbyte == 0) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: indefinite length not supported", errpre); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return NULL; |
| } |
| if (lengthbyte > sizeof(long)) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: data length %d > %lu not supported", errpre, |
| lengthbyte, (unsigned long)sizeof(long)); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return NULL; |
| } |
| data++; |
| *length = 0; /* protect against short lengths */ |
| while (lengthbyte--) { |
| *length <<= 8; |
| *length |= *data++; |
| } |
| if ((long) *length < 0) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: negative data length %ld\n", errpre, |
| (long) *length); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return NULL; |
| } |
| return data; |
| } else { /* short asnlength */ |
| *length = (long) lengthbyte; |
| return data + 1; |
| } |
| } |
| |
| /** |
| * @internal |
| * asn_build_length - builds an ASN header for a length with |
| * length specified. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * in this object following the length. |
| * |
| * |
| * Returns a pointer to the first byte of the contents of this object. |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param length IN - length of object |
| * |
| * @return Returns a pointer to the first byte of the contents of this object. |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_build_length(u_char * data, size_t * datalength, size_t length) |
| { |
| static const char *errpre = "build length"; |
| char ebuf[128]; |
| |
| u_char *start_data = data; |
| |
| /* |
| * no indefinite lengths sent |
| */ |
| if (length < 0x80) { |
| if (*datalength < 1) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: bad length < 1 :%lu, %lu", errpre, |
| (unsigned long)*datalength, (unsigned long)length); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return NULL; |
| } |
| *data++ = (u_char) length; |
| } else if (length <= 0xFF) { |
| if (*datalength < 2) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: bad length < 2 :%lu, %lu", errpre, |
| (unsigned long)*datalength, (unsigned long)length); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return NULL; |
| } |
| *data++ = (u_char) (0x01 | ASN_LONG_LEN); |
| *data++ = (u_char) length; |
| } else { /* 0xFF < length <= 0xFFFF */ |
| if (*datalength < 3) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: bad length < 3 :%lu, %lu", errpre, |
| (unsigned long)*datalength, (unsigned long)length); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return NULL; |
| } |
| *data++ = (u_char) (0x02 | ASN_LONG_LEN); |
| *data++ = (u_char) ((length >> 8) & 0xFF); |
| *data++ = (u_char) (length & 0xFF); |
| } |
| *datalength -= (data - start_data); |
| return data; |
| |
| } |
| |
| /** |
| * @internal |
| * asn_parse_objid - pulls an object indentifier out of an ASN object identifier type. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the beginning of the next object. |
| * |
| * "objid" is filled with the object identifier. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type OUT - asn type of object |
| * @param objid IN/OUT - pointer to start of output buffer |
| * @param objidlength IN/OUT - number of sub-id's in objid |
| * |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| */ |
| u_char * |
| asn_parse_objid(u_char * data, |
| size_t * datalength, |
| u_char * type, oid * objid, size_t * objidlength) |
| { |
| /* |
| * ASN.1 objid ::= 0x06 asnlength subidentifier {subidentifier}* |
| * subidentifier ::= {leadingbyte}* lastbyte |
| * leadingbyte ::= 1 7bitvalue |
| * lastbyte ::= 0 7bitvalue |
| */ |
| register u_char *bufp = data; |
| register oid *oidp = objid + 1; |
| register u_long subidentifier; |
| register long length; |
| u_long asn_length; |
| size_t original_length = *objidlength; |
| |
| *type = *bufp++; |
| bufp = asn_parse_length(bufp, &asn_length); |
| if (_asn_parse_length_check("parse objid", bufp, data, |
| asn_length, *datalength)) |
| return NULL; |
| |
| *datalength -= (int) asn_length + (bufp - data); |
| |
| DEBUGDUMPSETUP("recv", data, bufp - data + asn_length); |
| |
| /* |
| * Handle invalid object identifier encodings of the form 06 00 robustly |
| */ |
| if (asn_length == 0) |
| objid[0] = objid[1] = 0; |
| |
| length = asn_length; |
| (*objidlength)--; /* account for expansion of first byte */ |
| |
| while (length > 0 && (*objidlength)-- > 0) { |
| subidentifier = 0; |
| do { /* shift and add in low order 7 bits */ |
| subidentifier = |
| (subidentifier << 7) + (*(u_char *) bufp & ~ASN_BIT8); |
| length--; |
| } while ((*(u_char *) bufp++ & ASN_BIT8) && (length > 0)); /* last byte has high bit clear */ |
| |
| if (length == 0) { |
| u_char *last_byte = bufp - 1; |
| if (*last_byte & ASN_BIT8) { |
| /* last byte has high bit set -> wrong BER encoded OID */ |
| ERROR_MSG("subidentifier syntax error"); |
| return NULL; |
| } |
| } |
| #if defined(EIGHTBIT_SUBIDS) || (SIZEOF_LONG != 4) |
| if (subidentifier > MAX_SUBID) { |
| ERROR_MSG("subidentifier too large"); |
| return NULL; |
| } |
| #endif |
| *oidp++ = (oid) subidentifier; |
| } |
| |
| if (0 != length) { |
| ERROR_MSG("OID length exceeds buffer size"); |
| *objidlength = original_length; |
| return NULL; |
| } |
| |
| /* |
| * The first two subidentifiers are encoded into the first component |
| * with the value (X * 40) + Y, where: |
| * X is the value of the first subidentifier. |
| * Y is the value of the second subidentifier. |
| */ |
| subidentifier = (u_long) objid[1]; |
| if (subidentifier == 0x2B) { |
| objid[0] = 1; |
| objid[1] = 3; |
| } else { |
| if (subidentifier < 40) { |
| objid[0] = 0; |
| objid[1] = subidentifier; |
| } else if (subidentifier < 80) { |
| objid[0] = 1; |
| objid[1] = subidentifier - 40; |
| } else { |
| objid[0] = 2; |
| objid[1] = subidentifier - 80; |
| } |
| } |
| |
| *objidlength = (int) (oidp - objid); |
| |
| DEBUGMSG(("dumpv_recv", " ObjID: ")); |
| DEBUGMSGOID(("dumpv_recv", objid, *objidlength)); |
| DEBUGMSG(("dumpv_recv", "\n")); |
| return bufp; |
| } |
| |
| /** |
| * @internal |
| * asn_build_objid - Builds an ASN object identifier object containing the |
| * input string. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the beginning of the next object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type IN - asn type of object |
| * @param objid IN - pointer to start of input buffer |
| * @param objidlength IN - number of sub-id's in objid |
| * |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_build_objid(u_char * data, |
| size_t * datalength, |
| u_char type, oid * objid, size_t objidlength) |
| { |
| /* |
| * ASN.1 objid ::= 0x06 asnlength subidentifier {subidentifier}* |
| * subidentifier ::= {leadingbyte}* lastbyte |
| * leadingbyte ::= 1 7bitvalue |
| * lastbyte ::= 0 7bitvalue |
| */ |
| size_t asnlength; |
| register oid *op = objid; |
| u_char objid_size[MAX_OID_LEN]; |
| register u_long objid_val; |
| u_long first_objid_val; |
| register int i; |
| #ifndef NETSNMP_NO_DEBUGGING |
| u_char *initdatap = data; |
| #endif |
| |
| /* |
| * check if there are at least 2 sub-identifiers |
| */ |
| if (objidlength == 0) { |
| /* |
| * there are not, so make OID have two with value of zero |
| */ |
| objid_val = 0; |
| objidlength = 2; |
| } else if (objid[0] > 2) { |
| ERROR_MSG("build objid: bad first subidentifier"); |
| return NULL; |
| } else if (objidlength == 1) { |
| /* |
| * encode the first value |
| */ |
| objid_val = (op[0] * 40); |
| objidlength = 2; |
| op++; |
| } else { |
| /* |
| * combine the first two values |
| */ |
| if ((op[1] > 40) && |
| (op[0] < 2)) { |
| ERROR_MSG("build objid: bad second subidentifier"); |
| return NULL; |
| } |
| objid_val = (op[0] * 40) + op[1]; |
| op += 2; |
| } |
| first_objid_val = objid_val; |
| |
| /* |
| * ditch illegal calls now |
| */ |
| if (objidlength > MAX_OID_LEN) |
| return NULL; |
| |
| /* |
| * calculate the number of bytes needed to store the encoded value |
| */ |
| for (i = 1, asnlength = 0;;) { |
| |
| CHECK_OVERFLOW_U(objid_val,5); |
| if (objid_val < (unsigned) 0x80) { |
| objid_size[i] = 1; |
| asnlength += 1; |
| } else if (objid_val < (unsigned) 0x4000) { |
| objid_size[i] = 2; |
| asnlength += 2; |
| } else if (objid_val < (unsigned) 0x200000) { |
| objid_size[i] = 3; |
| asnlength += 3; |
| } else if (objid_val < (unsigned) 0x10000000) { |
| objid_size[i] = 4; |
| asnlength += 4; |
| } else { |
| objid_size[i] = 5; |
| asnlength += 5; |
| } |
| i++; |
| if (i >= (int) objidlength) |
| break; |
| objid_val = *op++; /* XXX - doesn't handle 2.X (X > 40) */ |
| } |
| |
| /* |
| * store the ASN.1 tag and length |
| */ |
| data = asn_build_header(data, datalength, type, asnlength); |
| if (_asn_build_header_check |
| ("build objid", data, *datalength, asnlength)) |
| return NULL; |
| |
| /* |
| * store the encoded OID value |
| */ |
| for (i = 1, objid_val = first_objid_val, op = objid + 2; |
| i < (int) objidlength; i++) { |
| if (i != 1) |
| objid_val = (uint32_t)(*op++); /* already logged warning above */ |
| switch (objid_size[i]) { |
| case 1: |
| *data++ = (u_char) objid_val; |
| break; |
| |
| case 2: |
| *data++ = (u_char) ((objid_val >> 7) | 0x80); |
| *data++ = (u_char) (objid_val & 0x07f); |
| break; |
| |
| case 3: |
| *data++ = (u_char) ((objid_val >> 14) | 0x80); |
| *data++ = (u_char) ((objid_val >> 7 & 0x7f) | 0x80); |
| *data++ = (u_char) (objid_val & 0x07f); |
| break; |
| |
| case 4: |
| *data++ = (u_char) ((objid_val >> 21) | 0x80); |
| *data++ = (u_char) ((objid_val >> 14 & 0x7f) | 0x80); |
| *data++ = (u_char) ((objid_val >> 7 & 0x7f) | 0x80); |
| *data++ = (u_char) (objid_val & 0x07f); |
| break; |
| |
| case 5: |
| *data++ = (u_char) ((objid_val >> 28) | 0x80); |
| *data++ = (u_char) ((objid_val >> 21 & 0x7f) | 0x80); |
| *data++ = (u_char) ((objid_val >> 14 & 0x7f) | 0x80); |
| *data++ = (u_char) ((objid_val >> 7 & 0x7f) | 0x80); |
| *data++ = (u_char) (objid_val & 0x07f); |
| break; |
| } |
| } |
| |
| /* |
| * return the length and data ptr |
| */ |
| *datalength -= asnlength; |
| DEBUGDUMPSETUP("send", initdatap, data - initdatap); |
| DEBUGMSG(("dumpv_send", " ObjID: ")); |
| DEBUGMSGOID(("dumpv_send", objid, objidlength)); |
| DEBUGMSG(("dumpv_send", "\n")); |
| return data; |
| } |
| |
| /** |
| * @internal |
| * asn_parse_null - Interprets an ASN null type. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the beginning of the next object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type OUT - asn type of object |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_parse_null(u_char * data, size_t * datalength, u_char * type) |
| { |
| /* |
| * ASN.1 null ::= 0x05 0x00 |
| */ |
| register u_char *bufp = data; |
| u_long asn_length; |
| |
| *type = *bufp++; |
| bufp = asn_parse_length(bufp, &asn_length); |
| if (bufp == NULL) { |
| ERROR_MSG("parse null: bad length"); |
| return NULL; |
| } |
| if (asn_length != 0) { |
| ERROR_MSG("parse null: malformed ASN.1 null"); |
| return NULL; |
| } |
| |
| *datalength -= (bufp - data); |
| |
| DEBUGDUMPSETUP("recv", data, bufp - data); |
| DEBUGMSG(("dumpv_recv", " NULL\n")); |
| |
| return bufp + asn_length; |
| } |
| |
| |
| /** |
| * @internal |
| * asn_build_null - Builds an ASN null object. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the beginning of the next object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type IN - asn type of object |
| * @retun Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| */ |
| u_char * |
| asn_build_null(u_char * data, size_t * datalength, u_char type) |
| { |
| /* |
| * ASN.1 null ::= 0x05 0x00 |
| */ |
| #ifndef NETSNMP_NO_DEBUGGING |
| u_char *initdatap = data; |
| #endif |
| data = asn_build_header(data, datalength, type, 0); |
| DEBUGDUMPSETUP("send", initdatap, data - initdatap); |
| DEBUGMSG(("dumpv_send", " NULL\n")); |
| return data; |
| } |
| |
| /** |
| * @internal |
| * asn_parse_bitstring - pulls a bitstring out of an ASN bitstring type. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the beginning of the next object. |
| * |
| * "string" is filled with the bit string. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type OUT - asn type of object |
| * @param string IN/OUT - pointer to start of output buffer |
| * @param strlength IN/OUT - size of output buffer |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_parse_bitstring(u_char * data, |
| size_t * datalength, |
| u_char * type, u_char * str, size_t * strlength) |
| { |
| /* |
| * bitstring ::= 0x03 asnlength unused {byte}* |
| */ |
| static const char *errpre = "parse bitstring"; |
| register u_char *bufp = data; |
| u_long asn_length; |
| |
| *type = *bufp++; |
| bufp = asn_parse_length(bufp, &asn_length); |
| if (_asn_parse_length_check(errpre, bufp, data, |
| asn_length, *datalength)) |
| return NULL; |
| |
| if ((size_t) asn_length > *strlength) { |
| _asn_length_err(errpre, (size_t) asn_length, *strlength); |
| return NULL; |
| } |
| if (_asn_bitstring_check(errpre, asn_length, *bufp)) |
| return NULL; |
| |
| DEBUGDUMPSETUP("recv", data, bufp - data); |
| DEBUGMSG(("dumpv_recv", " Bitstring: ")); |
| DEBUGMSGHEX(("dumpv_recv", data, asn_length)); |
| DEBUGMSG(("dumpv_recv", "\n")); |
| |
| memmove(str, bufp, asn_length); |
| *strlength = (int) asn_length; |
| *datalength -= (int) asn_length + (bufp - data); |
| return bufp + asn_length; |
| } |
| |
| |
| /** |
| * @internal |
| * asn_build_bitstring - Builds an ASN bit string object containing the |
| * input string. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the beginning of the next object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type IN - asn type of object |
| * @param string IN - pointer to start of input buffer |
| * @param strlength IN - size of input buffer |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_build_bitstring(u_char * data, |
| size_t * datalength, |
| u_char type, const u_char * str, size_t strlength) |
| { |
| /* |
| * ASN.1 bit string ::= 0x03 asnlength unused {byte}* |
| */ |
| static const char *errpre = "build bitstring"; |
| if (_asn_bitstring_check |
| (errpre, strlength, (u_char)((str) ? *str : 0))) |
| return NULL; |
| |
| data = asn_build_header(data, datalength, type, strlength); |
| if (_asn_build_header_check(errpre, data, *datalength, strlength)) |
| return NULL; |
| |
| if (strlength > 0 && str) |
| memmove(data, str, strlength); |
| else if (strlength > 0 && !str) { |
| ERROR_MSG("no string passed into asn_build_bitstring\n"); |
| return NULL; |
| } |
| |
| *datalength -= strlength; |
| DEBUGDUMPSETUP("send", data, strlength); |
| DEBUGMSG(("dumpv_send", " Bitstring: ")); |
| DEBUGMSGHEX(("dumpv_send", data, strlength)); |
| DEBUGMSG(("dumpv_send", "\n")); |
| return data + strlength; |
| } |
| |
| /** |
| * @internal |
| * asn_parse_unsigned_int64 - pulls a 64 bit unsigned long out of an ASN int |
| * type. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the end of this object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type OUT - asn type of object |
| * @param cp IN/OUT - pointer to counter struct |
| * @param countersize IN - size of output buffer |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_parse_unsigned_int64(u_char * data, |
| size_t * datalength, |
| u_char * type, |
| struct counter64 * cp, size_t countersize) |
| { |
| /* |
| * ASN.1 integer ::= 0x02 asnlength byte {byte}* |
| */ |
| static const char *errpre = "parse uint64"; |
| const int uint64sizelimit = (4 * 2) + 1; |
| register u_char *bufp = data; |
| u_long asn_length; |
| register u_long low = 0, high = 0; |
| |
| if (countersize != sizeof(struct counter64)) { |
| _asn_size_err(errpre, countersize, sizeof(struct counter64)); |
| return NULL; |
| } |
| *type = *bufp++; |
| bufp = asn_parse_length(bufp, &asn_length); |
| if (_asn_parse_length_check |
| (errpre, bufp, data, asn_length, *datalength)) |
| return NULL; |
| |
| DEBUGDUMPSETUP("recv", data, bufp - data); |
| #ifdef NETSNMP_WITH_OPAQUE_SPECIAL_TYPES |
| /* |
| * 64 bit counters as opaque |
| */ |
| if ((*type == ASN_OPAQUE) && |
| (asn_length <= ASN_OPAQUE_COUNTER64_MX_BER_LEN) && |
| (*bufp == ASN_OPAQUE_TAG1) && |
| ((*(bufp + 1) == ASN_OPAQUE_COUNTER64) || |
| (*(bufp + 1) == ASN_OPAQUE_U64))) { |
| /* |
| * change type to Counter64 or U64 |
| */ |
| *type = *(bufp + 1); |
| /* |
| * value is encoded as special format |
| */ |
| bufp = asn_parse_length(bufp + 2, &asn_length); |
| if (_asn_parse_length_check("parse opaque uint64", bufp, data, |
| asn_length, *datalength)) |
| return NULL; |
| } |
| #endif /* NETSNMP_WITH_OPAQUE_SPECIAL_TYPES */ |
| if (((int) asn_length > uint64sizelimit) || |
| (((int) asn_length == uint64sizelimit) && *bufp != 0x00)) { |
| _asn_length_err(errpre, (size_t) asn_length, uint64sizelimit); |
| return NULL; |
| } |
| *datalength -= (int) asn_length + (bufp - data); |
| while (asn_length--) { |
| high = ((0x00FFFFFF & high) << 8) | ((low & 0xFF000000U) >> 24); |
| low = ((low & 0x00FFFFFF) << 8) | *bufp++; |
| } |
| |
| CHECK_OVERFLOW_U(high,6); |
| CHECK_OVERFLOW_U(low,6); |
| |
| cp->low = low; |
| cp->high = high; |
| |
| DEBUGIF("dumpv_recv") { |
| char i64buf[I64CHARSZ + 1]; |
| printU64(i64buf, cp); |
| DEBUGMSG(("dumpv_recv", "Counter64: %s\n", i64buf)); |
| } |
| |
| return bufp; |
| } |
| |
| |
| /** |
| * @internal |
| * asn_build_unsigned_int64 - builds an ASN object containing a 64 bit integer. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the end of this object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of output buffer |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type IN - asn type of object |
| * @param cp IN - pointer to counter struct |
| * @param countersize IN - size of input buffer |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_build_unsigned_int64(u_char * data, |
| size_t * datalength, |
| u_char type, |
| const struct counter64 * cp, size_t countersize) |
| { |
| /* |
| * ASN.1 integer ::= 0x02 asnlength byte {byte}* |
| */ |
| |
| register u_long low, high; |
| register u_long mask, mask2; |
| int add_null_byte = 0; |
| size_t intsize; |
| #ifndef NETSNMP_NO_DEBUGGING |
| u_char *initdatap = data; |
| #endif |
| |
| if (countersize != sizeof(struct counter64)) { |
| _asn_size_err("build uint64", countersize, |
| sizeof(struct counter64)); |
| return NULL; |
| } |
| intsize = 8; |
| low = cp->low; |
| high = cp->high; |
| |
| CHECK_OVERFLOW_U(high,7); |
| CHECK_OVERFLOW_U(low,7); |
| |
| mask = 0xff000000U; |
| if (high & 0x80000000U) { |
| /* |
| * if MSB is set |
| */ |
| add_null_byte = 1; |
| intsize++; |
| } else { |
| /* |
| * Truncate "unnecessary" bytes off of the most significant end of this 2's |
| * complement integer. |
| * There should be no sequence of 9 consecutive 1's or 0's at the most |
| * significant end of the integer. |
| */ |
| mask2 = 0xff800000U; |
| while ((((high & mask2) == 0) || ((high & mask2) == mask2)) |
| && intsize > 1) { |
| intsize--; |
| high = ((high & 0x00ffffffu) << 8) | ((low & mask) >> 24); |
| low = (low & 0x00ffffffu) << 8; |
| } |
| } |
| #ifdef NETSNMP_WITH_OPAQUE_SPECIAL_TYPES |
| /* |
| * encode a Counter64 as an opaque (it also works in SNMPv1) |
| */ |
| /* |
| * turn into Opaque holding special tagged value |
| */ |
| if (type == ASN_OPAQUE_COUNTER64) { |
| /* |
| * put the tag and length for the Opaque wrapper |
| */ |
| data = asn_build_header(data, datalength, ASN_OPAQUE, intsize + 3); |
| if (_asn_build_header_check |
| ("build counter u64", data, *datalength, intsize + 3)) |
| return NULL; |
| |
| /* |
| * put the special tag and length |
| */ |
| *data++ = ASN_OPAQUE_TAG1; |
| *data++ = ASN_OPAQUE_COUNTER64; |
| *data++ = (u_char) intsize; |
| *datalength = *datalength - 3; |
| } else |
| /* |
| * Encode the Unsigned int64 in an opaque |
| */ |
| /* |
| * turn into Opaque holding special tagged value |
| */ |
| if (type == ASN_OPAQUE_U64) { |
| /* |
| * put the tag and length for the Opaque wrapper |
| */ |
| data = asn_build_header(data, datalength, ASN_OPAQUE, intsize + 3); |
| if (_asn_build_header_check |
| ("build opaque u64", data, *datalength, intsize + 3)) |
| return NULL; |
| |
| /* |
| * put the special tag and length |
| */ |
| *data++ = ASN_OPAQUE_TAG1; |
| *data++ = ASN_OPAQUE_U64; |
| *data++ = (u_char) intsize; |
| *datalength = *datalength - 3; |
| } else { |
| #endif /* NETSNMP_WITH_OPAQUE_SPECIAL_TYPES */ |
| data = asn_build_header(data, datalength, type, intsize); |
| if (_asn_build_header_check |
| ("build uint64", data, *datalength, intsize)) |
| return NULL; |
| |
| #ifdef NETSNMP_WITH_OPAQUE_SPECIAL_TYPES |
| } |
| #endif /* NETSNMP_WITH_OPAQUE_SPECIAL_TYPES */ |
| *datalength -= intsize; |
| if (add_null_byte == 1) { |
| *data++ = '\0'; |
| intsize--; |
| } |
| while (intsize--) { |
| *data++ = (u_char) (high >> 24); |
| high = ((high & 0x00ffffff) << 8) | ((low & mask) >> 24); |
| low = (low & 0x00ffffff) << 8; |
| |
| } |
| DEBUGDUMPSETUP("send", initdatap, data - initdatap); |
| DEBUGIF("dumpv_send") { |
| char i64buf[I64CHARSZ + 1]; |
| printU64(i64buf, cp); |
| DEBUGMSG(("dumpv_send", i64buf)); |
| } |
| return data; |
| } |
| |
| #ifdef NETSNMP_WITH_OPAQUE_SPECIAL_TYPES |
| |
| |
| /** |
| * @internal |
| * asn_parse_signed_int64 - pulls a 64 bit signed long out of an ASN int |
| * type. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the end of this object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type OUT - asn type of object |
| * @param cp IN/OUT - pointer to counter struct |
| * @param countersize IN - size of output buffer |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| |
| u_char * |
| asn_parse_signed_int64(u_char * data, |
| size_t * datalength, |
| u_char * type, |
| struct counter64 * cp, size_t countersize) |
| { |
| static const char *errpre = "parse int64"; |
| const int int64sizelimit = (4 * 2) + 1; |
| char ebuf[128]; |
| register u_char *bufp = data; |
| u_long asn_length; |
| register u_int low = 0, high = 0; |
| |
| if (countersize != sizeof(struct counter64)) { |
| _asn_size_err(errpre, countersize, sizeof(struct counter64)); |
| return NULL; |
| } |
| *type = *bufp++; |
| bufp = asn_parse_length(bufp, &asn_length); |
| if (_asn_parse_length_check |
| (errpre, bufp, data, asn_length, *datalength)) |
| return NULL; |
| |
| DEBUGDUMPSETUP("recv", data, bufp - data); |
| if ((*type == ASN_OPAQUE) && |
| (asn_length <= ASN_OPAQUE_COUNTER64_MX_BER_LEN) && |
| (*bufp == ASN_OPAQUE_TAG1) && (*(bufp + 1) == ASN_OPAQUE_I64)) { |
| /* |
| * change type to Int64 |
| */ |
| *type = *(bufp + 1); |
| /* |
| * value is encoded as special format |
| */ |
| bufp = asn_parse_length(bufp + 2, &asn_length); |
| if (_asn_parse_length_check("parse opaque int64", bufp, data, |
| asn_length, *datalength)) |
| return NULL; |
| } |
| /* |
| * this should always have been true until snmp gets int64 PDU types |
| */ |
| else { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: wrong type: %d, len %d, buf bytes (%02X,%02X)", |
| errpre, *type, (int) asn_length, *bufp, *(bufp + 1)); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return NULL; |
| } |
| if (((int) asn_length > int64sizelimit) || |
| (((int) asn_length == int64sizelimit) && *bufp != 0x00)) { |
| _asn_length_err(errpre, (size_t) asn_length, int64sizelimit); |
| return NULL; |
| } |
| *datalength -= (int) asn_length + (bufp - data); |
| if (*bufp & 0x80) { |
| low = 0xFFFFFFFFU; /* first byte bit 1 means start the data with 1s */ |
| high = 0xFFFFFF; |
| } |
| |
| while (asn_length--) { |
| high = ((0x00FFFFFF & high) << 8) | ((low & 0xFF000000U) >> 24); |
| low = ((low & 0x00FFFFFF) << 8) | *bufp++; |
| } |
| |
| CHECK_OVERFLOW_U(high,8); |
| CHECK_OVERFLOW_U(low,8); |
| |
| cp->low = low; |
| cp->high = high; |
| |
| DEBUGIF("dumpv_recv") { |
| char i64buf[I64CHARSZ + 1]; |
| printI64(i64buf, cp); |
| DEBUGMSG(("dumpv_recv", "Integer64: %s\n", i64buf)); |
| } |
| |
| return bufp; |
| } |
| |
| |
| |
| /** |
| * @internal |
| * asn_build_signed_int64 - builds an ASN object containing a 64 bit integer. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the end of this object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of output buffer |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type IN - asn type of object |
| * @param cp IN - pointer to counter struct |
| * @param countersize IN - size of input buffer |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_build_signed_int64(u_char * data, |
| size_t * datalength, |
| u_char type, |
| const struct counter64 * cp, size_t countersize) |
| { |
| /* |
| * ASN.1 integer ::= 0x02 asnlength byte {byte}* |
| */ |
| |
| register u_int mask, mask2; |
| u_long low; |
| long high; /* MUST be signed because of CHECK_OVERFLOW_S(). */ |
| size_t intsize; |
| #ifndef NETSNMP_NO_DEBUGGING |
| u_char *initdatap = data; |
| #endif |
| |
| if (countersize != sizeof(struct counter64)) { |
| _asn_size_err("build int64", countersize, |
| sizeof(struct counter64)); |
| return NULL; |
| } |
| intsize = 8; |
| low = cp->low; |
| high = cp->high; /* unsigned to signed conversion */ |
| |
| CHECK_OVERFLOW_S(high,9); |
| CHECK_OVERFLOW_U(low,9); |
| |
| /* |
| * Truncate "unnecessary" bytes off of the most significant end of this |
| * 2's complement integer. There should be no sequence of 9 |
| * consecutive 1's or 0's at the most significant end of the |
| * integer. |
| */ |
| mask = 0xFF000000U; |
| mask2 = 0xFF800000U; |
| while ((((high & mask2) == 0) || ((high & mask2) == mask2)) |
| && intsize > 1) { |
| intsize--; |
| high = ((high & 0x00ffffff) << 8) | ((low & mask) >> 24); |
| low = (low & 0x00ffffff) << 8; |
| } |
| /* |
| * until a real int64 gets incorperated into SNMP, we are going to |
| * encode it as an opaque instead. First, we build the opaque |
| * header and then the int64 tag type we use to mark it as an |
| * int64 in the opaque string. |
| */ |
| data = asn_build_header(data, datalength, ASN_OPAQUE, intsize + 3); |
| if (_asn_build_header_check |
| ("build int64", data, *datalength, intsize + 3)) |
| return NULL; |
| |
| *data++ = ASN_OPAQUE_TAG1; |
| *data++ = ASN_OPAQUE_I64; |
| *data++ = (u_char) intsize; |
| *datalength -= (3 + intsize); |
| |
| while (intsize--) { |
| *data++ = (u_char) (high >> 24); |
| high = ((high & 0x00ffffff) << 8) | ((low & mask) >> 24); |
| low = (low & 0x00ffffff) << 8; |
| } |
| DEBUGDUMPSETUP("send", initdatap, data - initdatap); |
| DEBUGIF("dumpv_send") { |
| char i64buf[I64CHARSZ + 1]; |
| printU64(i64buf, cp); |
| DEBUGMSG(("dumpv_send", "%s\n", i64buf)); |
| } |
| return data; |
| } |
| |
| |
| /** |
| * @internal |
| * asn_parse_float - pulls a single precision floating-point out of an opaque type. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the end of this object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type OUT - asn type of object |
| * @param floatp IN/OUT - pointer to float |
| * @param floatsize IN - size of output buffer |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_parse_float(u_char * data, |
| size_t * datalength, |
| u_char * type, float *floatp, size_t floatsize) |
| { |
| register u_char *bufp = data; |
| u_long asn_length; |
| union { |
| float floatVal; |
| long longVal; |
| u_char c[sizeof(float)]; |
| } fu; |
| |
| if (floatsize != sizeof(float)) { |
| _asn_size_err("parse float", floatsize, sizeof(float)); |
| return NULL; |
| } |
| *type = *bufp++; |
| bufp = asn_parse_length(bufp, &asn_length); |
| if (_asn_parse_length_check("parse float", bufp, data, |
| asn_length, *datalength)) |
| return NULL; |
| |
| DEBUGDUMPSETUP("recv", data, bufp - data + asn_length); |
| /* |
| * the float is encoded as an opaque |
| */ |
| if ((*type == ASN_OPAQUE) && |
| (asn_length == ASN_OPAQUE_FLOAT_BER_LEN) && |
| (*bufp == ASN_OPAQUE_TAG1) && (*(bufp + 1) == ASN_OPAQUE_FLOAT)) { |
| |
| /* |
| * value is encoded as special format |
| */ |
| bufp = asn_parse_length(bufp + 2, &asn_length); |
| if (_asn_parse_length_check("parse opaque float", bufp, data, |
| asn_length, *datalength)) |
| return NULL; |
| |
| /* |
| * change type to Float |
| */ |
| *type = ASN_OPAQUE_FLOAT; |
| } |
| |
| if (asn_length != sizeof(float)) { |
| _asn_size_err("parse seq float", asn_length, sizeof(float)); |
| return NULL; |
| } |
| |
| *datalength -= (int) asn_length + (bufp - data); |
| memcpy(&fu.c[0], bufp, asn_length); |
| |
| /* |
| * correct for endian differences |
| */ |
| fu.longVal = ntohl(fu.longVal); |
| |
| *floatp = fu.floatVal; |
| |
| DEBUGMSG(("dumpv_recv", "Opaque float: %f\n", *floatp)); |
| return bufp; |
| } |
| |
| /** |
| * @internal |
| * asn_build_float - builds an ASN object containing a single precision floating-point |
| * number in an Opaque value. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the end of this object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type IN - asn type of object |
| * @param floatp IN - pointer to float |
| * @param floatsize IN - size of input buffer |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| |
| */ |
| u_char * |
| asn_build_float(u_char * data, |
| size_t * datalength, |
| u_char type, const float *floatp, size_t floatsize) |
| { |
| union { |
| float floatVal; |
| int intVal; |
| u_char c[sizeof(float)]; |
| } fu; |
| #ifndef NETSNMP_NO_DEBUGGING |
| u_char *initdatap = data; |
| #endif |
| |
| if (floatsize != sizeof(float)) { |
| _asn_size_err("build float", floatsize, sizeof(float)); |
| return NULL; |
| } |
| /* |
| * encode the float as an opaque |
| */ |
| /* |
| * turn into Opaque holding special tagged value |
| */ |
| |
| /* |
| * put the tag and length for the Opaque wrapper |
| */ |
| data = asn_build_header(data, datalength, ASN_OPAQUE, floatsize + 3); |
| if (_asn_build_header_check |
| ("build float", data, *datalength, (floatsize + 3))) |
| return NULL; |
| |
| /* |
| * put the special tag and length |
| */ |
| *data++ = ASN_OPAQUE_TAG1; |
| *data++ = ASN_OPAQUE_FLOAT; |
| *data++ = (u_char) floatsize; |
| *datalength = *datalength - 3; |
| |
| fu.floatVal = *floatp; |
| /* |
| * correct for endian differences |
| */ |
| fu.intVal = htonl(fu.intVal); |
| |
| *datalength -= floatsize; |
| memcpy(data, &fu.c[0], floatsize); |
| |
| DEBUGDUMPSETUP("send", initdatap, data - initdatap); |
| DEBUGMSG(("dumpv_send", "Opaque float: %f\n", *floatp)); |
| data += floatsize; |
| return data; |
| } |
| |
| |
| /** |
| * @internal |
| * asn_parse_double - pulls a double out of an opaque type. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the end of this object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type OUT - asn type of object |
| * @param doublep IN/OUT - pointer to double |
| * @param doublesize IN - size of output buffer |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_parse_double(u_char * data, |
| size_t * datalength, |
| u_char * type, double *doublep, size_t doublesize) |
| { |
| register u_char *bufp = data; |
| u_long asn_length; |
| long tmp; |
| union { |
| double doubleVal; |
| int intVal[2]; |
| u_char c[sizeof(double)]; |
| } fu; |
| |
| |
| if (doublesize != sizeof(double)) { |
| _asn_size_err("parse double", doublesize, sizeof(double)); |
| return NULL; |
| } |
| *type = *bufp++; |
| bufp = asn_parse_length(bufp, &asn_length); |
| if (_asn_parse_length_check("parse double", bufp, data, |
| asn_length, *datalength)) |
| return NULL; |
| |
| DEBUGDUMPSETUP("recv", data, bufp - data + asn_length); |
| /* |
| * the double is encoded as an opaque |
| */ |
| if ((*type == ASN_OPAQUE) && |
| (asn_length == ASN_OPAQUE_DOUBLE_BER_LEN) && |
| (*bufp == ASN_OPAQUE_TAG1) && (*(bufp + 1) == ASN_OPAQUE_DOUBLE)) { |
| |
| /* |
| * value is encoded as special format |
| */ |
| bufp = asn_parse_length(bufp + 2, &asn_length); |
| if (_asn_parse_length_check("parse opaque double", bufp, data, |
| asn_length, *datalength)) |
| return NULL; |
| |
| /* |
| * change type to Double |
| */ |
| *type = ASN_OPAQUE_DOUBLE; |
| } |
| |
| if (asn_length != sizeof(double)) { |
| _asn_size_err("parse seq double", asn_length, sizeof(double)); |
| return NULL; |
| } |
| *datalength -= (int) asn_length + (bufp - data); |
| memcpy(&fu.c[0], bufp, asn_length); |
| |
| /* |
| * correct for endian differences |
| */ |
| |
| tmp = ntohl(fu.intVal[0]); |
| fu.intVal[0] = ntohl(fu.intVal[1]); |
| fu.intVal[1] = tmp; |
| |
| *doublep = fu.doubleVal; |
| DEBUGMSG(("dumpv_recv", " Opaque Double:\t%f\n", *doublep)); |
| |
| return bufp; |
| } |
| |
| |
| /** |
| * @internal |
| * asn_build_double - builds an ASN object containing a double |
| * number in an Opaque value. |
| * |
| * On entry, datalength is input as the number of valid bytes following |
| * "data". On exit, it is returned as the number of valid bytes |
| * following the end of this object. |
| * |
| * Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| * |
| * @param data IN - pointer to start of object |
| * @param datalength IN/OUT - number of valid bytes left in buffer |
| * @param type IN - asn type of object |
| * @param doublep IN - pointer to double |
| * @param doublesize IN - size of input buffer |
| * @return Returns a pointer to the first byte past the end |
| * of this object (i.e. the start of the next object). |
| * Returns NULL on any error. |
| */ |
| u_char * |
| asn_build_double(u_char * data, |
| size_t * datalength, |
| u_char type, const double *doublep, size_t doublesize) |
| { |
| long tmp; |
| union { |
| double doubleVal; |
| int intVal[2]; |
| u_char c[sizeof(double)]; |
| } fu; |
| #ifndef NETSNMP_NO_DEBUGGING |
| u_char *initdatap = data; |
| #endif |
| |
| if (doublesize != sizeof(double)) { |
| _asn_size_err("build double", doublesize, sizeof(double)); |
| return NULL; |
| } |
| |
| /* |
| * encode the double as an opaque |
| */ |
| /* |
| * turn into Opaque holding special tagged value |
| */ |
| |
| /* |
| * put the tag and length for the Opaque wrapper |
| */ |
| data = asn_build_header(data, datalength, ASN_OPAQUE, doublesize + 3); |
| if (_asn_build_header_check |
| ("build double", data, *datalength, doublesize + 3)) |
| return NULL; |
| |
| /* |
| * put the special tag and length |
| */ |
| *data++ = ASN_OPAQUE_TAG1; |
| *data++ = ASN_OPAQUE_DOUBLE; |
| *data++ = (u_char) doublesize; |
| *datalength = *datalength - 3; |
| |
| fu.doubleVal = *doublep; |
| /* |
| * correct for endian differences |
| */ |
| tmp = htonl(fu.intVal[0]); |
| fu.intVal[0] = htonl(fu.intVal[1]); |
| fu.intVal[1] = tmp; |
| *datalength -= doublesize; |
| memcpy(data, &fu.c[0], doublesize); |
| |
| data += doublesize; |
| DEBUGDUMPSETUP("send", initdatap, data - initdatap); |
| DEBUGMSG(("dumpv_send", " Opaque double: %f\n", *doublep)); |
| return data; |
| } |
| |
| #endif /* NETSNMP_WITH_OPAQUE_SPECIAL_TYPES */ |
| |
| |
| /** |
| * @internal |
| * This function increases the size of the buffer pointed to by *pkt, which |
| * is initially of size *pkt_len. Contents are preserved **AT THE TOP END OF |
| * THE BUFFER** (hence making this function useful for reverse encoding). |
| * You can change the reallocation scheme, but you **MUST** guarantee to |
| * allocate **AT LEAST** one extra byte. If memory cannot be reallocated, |
| * then return 0; otherwise return 1. |
| * |
| * @param pkt buffer to increase |
| * @param pkt_len initial buffer size |
| * |
| * @return 1 on success 0 on error (memory cannot be reallocated) |
| */ |
| int |
| asn_realloc(u_char ** pkt, size_t * pkt_len) |
| { |
| if (pkt != NULL && pkt_len != NULL) { |
| size_t old_pkt_len = *pkt_len; |
| |
| DEBUGMSGTL(("asn_realloc", " old_pkt %08p, old_pkt_len %08x\n", |
| *pkt, old_pkt_len)); |
| |
| if (snmp_realloc(pkt, pkt_len)) { |
| DEBUGMSGTL(("asn_realloc", " new_pkt %08p, new_pkt_len %08x\n", |
| *pkt, *pkt_len)); |
| DEBUGMSGTL(("asn_realloc", |
| " memmove(%08p + %08x, %08p, %08x)\n", *pkt, |
| (*pkt_len - old_pkt_len), *pkt, old_pkt_len)); |
| memmove(*pkt + (*pkt_len - old_pkt_len), *pkt, old_pkt_len); |
| memset(*pkt, (int) ' ', *pkt_len - old_pkt_len); |
| return 1; |
| } else { |
| DEBUGMSG(("asn_realloc", " CANNOT REALLOC()\n")); |
| } |
| } |
| return 0; |
| } |
| |
| #ifdef NETSNMP_USE_REVERSE_ASNENCODING |
| |
| /** |
| * @internal |
| * reverse builds an ASN header for a length with |
| * length specified. |
| * |
| * @param pkt IN/OUT address of the begining of the buffer. |
| * @param pkt_len IN/OUT address to an integer containing the size of pkt. |
| * @param offset IN/OUT offset to the start of the buffer where to write |
| * @param r IN if not zero reallocate the buffer to fit the |
| * needed size. |
| * @param length IN - length of object |
| * |
| * @return 1 on success, 0 on error |
| */ |
| int |
| asn_realloc_rbuild_length(u_char ** pkt, size_t * pkt_len, |
| size_t * offset, int r, size_t length) |
| { |
| static const char *errpre = "build length"; |
| char ebuf[128]; |
| int tmp_int; |
| size_t start_offset = *offset; |
| |
| if (length <= 0x7f) { |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: bad length < 1 :%ld, %lu", errpre, |
| (long)(*pkt_len - *offset), (unsigned long)length); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = length; |
| } else { |
| while (length > 0xff) { |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: bad length < 1 :%ld, %lu", errpre, |
| (long)(*pkt_len - *offset), (unsigned long)length); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = length & 0xff; |
| length >>= 8; |
| } |
| |
| while ((*pkt_len - *offset) < 2) { |
| if (!(r && asn_realloc(pkt, pkt_len))) { |
| snprintf(ebuf, sizeof(ebuf), |
| "%s: bad length < 1 :%ld, %lu", errpre, |
| (long)(*pkt_len - *offset), (unsigned long)length); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return 0; |
| } |
| } |
| |
| *(*pkt + *pkt_len - (++*offset)) = length & 0xff; |
| tmp_int = *offset - start_offset; |
| *(*pkt + *pkt_len - (++*offset)) = tmp_int | 0x80; |
| } |
| |
| return 1; |
| } |
| |
| /** |
| * @internal |
| * builds an ASN header for an object with the ID and |
| * length specified. |
| * |
| * @see asn_build_header |
| * |
| * @param pkt IN/OUT address of the begining of the buffer. |
| * @param pkt_len IN/OUT address to an integer containing the size of pkt. |
| * @param offset IN/OUT offset to the start of the buffer where to write |
| * @param r IN if not zero reallocate the buffer to fit the |
| * needed size. |
| * @param type IN - type of object |
| * @param length IN - length of object |
| * |
| * @return 1 on success, 0 on error |
| */ |
| int |
| asn_realloc_rbuild_header(u_char ** pkt, size_t * pkt_len, |
| size_t * offset, int r, |
| u_char type, size_t length) |
| { |
| char ebuf[128]; |
| |
| if (asn_realloc_rbuild_length(pkt, pkt_len, offset, r, length)) { |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| snprintf(ebuf, sizeof(ebuf), |
| "bad header length < 1 :%ld, %lu", |
| (long)(*pkt_len - *offset), (unsigned long)length); |
| ebuf[ sizeof(ebuf)-1 ] = 0; |
| ERROR_MSG(ebuf); |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = type; |
| return 1; |
| } |
| return 0; |
| } |
| |
| /** |
| * @internal |
| * builds an ASN object containing an int. |
| * |
| * @see asn_build_int |
| * |
| * @param pkt IN/OUT address of the begining of the buffer. |
| * @param pkt_len IN/OUT address to an integer containing the size of pkt. |
| * @param offset IN/OUT offset to the start of the buffer where to write |
| * @param r IN if not zero reallocate the buffer to fit the |
| * needed size. |
| * @param type IN - type of object |
| * @param intp IN - pointer to start of long integer |
| * @param intsize IN - size of input buffer |
| * |
| * @return 1 on success, 0 on error |
| */ |
| int |
| asn_realloc_rbuild_int(u_char ** pkt, size_t * pkt_len, |
| size_t * offset, int r, |
| u_char type, const long *intp, size_t intsize) |
| { |
| static const char *errpre = "build int"; |
| register long integer = *intp; |
| int testvalue; |
| size_t start_offset = *offset; |
| |
| if (intsize != sizeof(long)) { |
| _asn_size_err(errpre, intsize, sizeof(long)); |
| return 0; |
| } |
| |
| CHECK_OVERFLOW_S(integer,10); |
| testvalue = (integer < 0) ? -1 : 0; |
| |
| if (((*pkt_len - *offset) < 1) && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) integer; |
| integer >>= 8; |
| |
| while (integer != testvalue) { |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) integer; |
| integer >>= 8; |
| } |
| |
| if ((*(*pkt + *pkt_len - *offset) & 0x80) != (testvalue & 0x80)) { |
| /* |
| * Make sure left most bit is representational of the rest of the bits |
| * that aren't encoded. |
| */ |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = testvalue & 0xff; |
| } |
| |
| if (asn_realloc_rbuild_header(pkt, pkt_len, offset, r, type, |
| (*offset - start_offset))) { |
| if (_asn_realloc_build_header_check(errpre, pkt, pkt_len, |
| (*offset - start_offset))) { |
| return 0; |
| } else { |
| DEBUGDUMPSETUP("send", (*pkt + *pkt_len - *offset), |
| (*offset - start_offset)); |
| DEBUGMSG(("dumpv_send", " Integer:\t%ld (0x%.2X)\n", *intp, |
| *intp)); |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * @internal |
| * builds an ASN object containing an string. |
| * |
| * @see asn_build_string |
| * |
| * @param pkt IN/OUT address of the begining of the buffer. |
| * @param pkt_len IN/OUT address to an integer containing the size of pkt. |
| * @param offset IN/OUT offset to the start of the buffer where to write |
| * @param r IN if not zero reallocate the buffer to fit the |
| * needed size. |
| * @param type IN - type of object |
| * @param string IN - pointer to start of the string |
| * @param strlength IN - size of input buffer |
| * |
| * @return 1 on success, 0 on error |
| */ |
| |
| int |
| asn_realloc_rbuild_string(u_char ** pkt, size_t * pkt_len, |
| size_t * offset, int r, |
| u_char type, |
| const u_char * str, size_t strlength) |
| { |
| static const char *errpre = "build string"; |
| size_t start_offset = *offset; |
| |
| while ((*pkt_len - *offset) < strlength) { |
| if (!(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| } |
| |
| *offset += strlength; |
| memcpy(*pkt + *pkt_len - *offset, str, strlength); |
| |
| if (asn_realloc_rbuild_header |
| (pkt, pkt_len, offset, r, type, strlength)) { |
| if (_asn_realloc_build_header_check |
| (errpre, pkt, pkt_len, strlength)) { |
| return 0; |
| } else { |
| DEBUGDUMPSETUP("send", (*pkt + *pkt_len - *offset), |
| *offset - start_offset); |
| DEBUGIF("dumpv_send") { |
| if (strlength == 0) { |
| DEBUGMSG(("dumpv_send", " String: [NULL]\n")); |
| } else { |
| u_char *buf = (u_char *) malloc(2 * strlength); |
| size_t l = |
| (buf != NULL) ? (2 * strlength) : 0, ol = 0; |
| |
| if (sprint_realloc_asciistring |
| (&buf, &l, &ol, 1, str, strlength)) { |
| DEBUGMSG(("dumpv_send", " String:\t%s\n", buf)); |
| } else { |
| if (buf == NULL) { |
| DEBUGMSG(("dumpv_send", |
| " String:\t[TRUNCATED]\n")); |
| } else { |
| DEBUGMSG(("dumpv_send", |
| " String:\t%s [TRUNCATED]\n", buf)); |
| } |
| } |
| if (buf != NULL) { |
| free(buf); |
| } |
| } |
| } |
| } |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * @internal |
| * builds an ASN object containing an unsigned int. |
| * |
| * @see asn_build_unsigned_int |
| * |
| * @param pkt IN/OUT address of the begining of the buffer. |
| * @param pkt_len IN/OUT address to an integer containing the size of pkt. |
| * @param offset IN/OUT offset to the start of the buffer where to write |
| * @param r IN if not zero reallocate the buffer to fit the |
| * needed size. |
| * @param type IN - type of object |
| * @param intp IN - pointer to start of unsigned int |
| * @param intsize IN - size of input buffer |
| * |
| * @return 1 on success, 0 on error |
| */ |
| int |
| asn_realloc_rbuild_unsigned_int(u_char ** pkt, size_t * pkt_len, |
| size_t * offset, int r, |
| u_char type, const u_long * intp, size_t intsize) |
| { |
| static const char *errpre = "build uint"; |
| register u_long integer = *intp; |
| size_t start_offset = *offset; |
| |
| if (intsize != sizeof(unsigned long)) { |
| _asn_size_err(errpre, intsize, sizeof(unsigned long)); |
| return 0; |
| } |
| |
| CHECK_OVERFLOW_U(integer,11); |
| |
| if (((*pkt_len - *offset) < 1) && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) integer; |
| integer >>= 8; |
| |
| while (integer != 0) { |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) integer; |
| integer >>= 8; |
| } |
| |
| if ((*(*pkt + *pkt_len - *offset) & 0x80) != (0 & 0x80)) { |
| /* |
| * Make sure left most bit is representational of the rest of the bits |
| * that aren't encoded. |
| */ |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = 0; |
| } |
| |
| if (asn_realloc_rbuild_header(pkt, pkt_len, offset, r, type, |
| (*offset - start_offset))) { |
| if (_asn_realloc_build_header_check(errpre, pkt, pkt_len, |
| (*offset - start_offset))) { |
| return 0; |
| } else { |
| DEBUGDUMPSETUP("send", (*pkt + *pkt_len - *offset), |
| (*offset - start_offset)); |
| DEBUGMSG(("dumpv_send", " UInteger:\t%lu (0x%.2X)\n", *intp, |
| *intp)); |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * @internal |
| * builds an ASN object containing an sequence. |
| * |
| * @see asn_build_sequence |
| * |
| * @param pkt IN/OUT address of the begining of the buffer. |
| * @param pkt_len IN/OUT address to an integer containing the size of pkt. |
| * @param offset IN/OUT offset to the start of the buffer where to write |
| * @param r IN if not zero reallocate the buffer to fit the |
| * needed size. |
| * @param type IN - type of object |
| * @param length IN - length of object |
| * |
| * @return 1 on success, 0 on error |
| */ |
| |
| int |
| asn_realloc_rbuild_sequence(u_char ** pkt, size_t * pkt_len, |
| size_t * offset, int r, |
| u_char type, size_t length) |
| { |
| return asn_realloc_rbuild_header(pkt, pkt_len, offset, r, type, |
| length); |
| } |
| |
| /** |
| * @internal |
| * builds an ASN object containing an objid. |
| * |
| * @see asn_build_objid |
| * |
| * @param pkt IN/OUT address of the begining of the buffer. |
| * @param pkt_len IN/OUT address to an integer containing the size of pkt. |
| * @param offset IN/OUT offset to the start of the buffer where to write |
| * @param r IN if not zero reallocate the buffer to fit the |
| * needed size. |
| * @param type IN - type of object |
| * @param objid IN - pointer to the object id |
| * @param objidlength IN - length of the input |
| * |
| * @return 1 on success, 0 on error |
| */ |
| |
| int |
| asn_realloc_rbuild_objid(u_char ** pkt, size_t * pkt_len, |
| size_t * offset, int r, |
| u_char type, |
| const oid * objid, size_t objidlength) |
| { |
| /* |
| * ASN.1 objid ::= 0x06 asnlength subidentifier {subidentifier}* |
| * subidentifier ::= {leadingbyte}* lastbyte |
| * leadingbyte ::= 1 7bitvalue |
| * lastbyte ::= 0 7bitvalue |
| */ |
| register size_t i; |
| register oid tmpint; |
| size_t start_offset = *offset; |
| const char *errpre = "build objid"; |
| |
| /* |
| * Check if there are at least 2 sub-identifiers. |
| */ |
| if (objidlength == 0) { |
| /* |
| * There are not, so make OID have two with value of zero. |
| */ |
| while ((*pkt_len - *offset) < 2) { |
| if (!(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| } |
| |
| *(*pkt + *pkt_len - (++*offset)) = 0; |
| *(*pkt + *pkt_len - (++*offset)) = 0; |
| } else if (objid[0] > 2) { |
| ERROR_MSG("build objid: bad first subidentifier"); |
| return 0; |
| } else if (objidlength == 1) { |
| /* |
| * Encode the first value. |
| */ |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) objid[0]; |
| } else { |
| for (i = objidlength; i > 2; i--) { |
| tmpint = objid[i - 1]; |
| CHECK_OVERFLOW_U(tmpint,12); |
| |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) tmpint & 0x7f; |
| tmpint >>= 7; |
| |
| while (tmpint > 0) { |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = |
| (u_char) ((tmpint & 0x7f) | 0x80); |
| tmpint >>= 7; |
| } |
| } |
| |
| /* |
| * Combine the first two values. |
| */ |
| if ((objid[1] > 40) && |
| (objid[0] < 2)) { |
| ERROR_MSG("build objid: bad second subidentifier"); |
| return 0; |
| } |
| tmpint = ((objid[0] * 40) + objid[1]); |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) tmpint & 0x7f; |
| tmpint >>= 7; |
| |
| while (tmpint > 0) { |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = |
| (u_char) ((tmpint & 0x7f) | 0x80); |
| tmpint >>= 7; |
| } |
| } |
| |
| tmpint = *offset - start_offset; |
| if (asn_realloc_rbuild_header(pkt, pkt_len, offset, r, type, |
| (*offset - start_offset))) { |
| if (_asn_realloc_build_header_check(errpre, pkt, pkt_len, |
| (*offset - start_offset))) { |
| return 0; |
| } else { |
| DEBUGDUMPSETUP("send", (*pkt + *pkt_len - *offset), |
| (*offset - start_offset)); |
| DEBUGMSG(("dumpv_send", " ObjID: ")); |
| DEBUGMSGOID(("dumpv_send", objid, objidlength)); |
| DEBUGMSG(("dumpv_send", "\n")); |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * @internal |
| * builds an ASN object containing an null object. |
| * |
| * @see asn_build_null |
| * |
| * @param pkt IN/OUT address of the begining of the buffer. |
| * @param pkt_len IN/OUT address to an integer containing the size of pkt. |
| * @param offset IN/OUT offset to the start of the buffer where to write |
| * @param r IN if not zero reallocate the buffer to fit the |
| * needed size. |
| * @param type IN - type of object |
| * |
| * @return 1 on success, 0 on error |
| */ |
| |
| int |
| asn_realloc_rbuild_null(u_char ** pkt, size_t * pkt_len, |
| size_t * offset, int r, u_char type) |
| { |
| /* |
| * ASN.1 null ::= 0x05 0x00 |
| */ |
| size_t start_offset = *offset; |
| |
| if (asn_realloc_rbuild_header(pkt, pkt_len, offset, r, type, 0)) { |
| DEBUGDUMPSETUP("send", (*pkt + *pkt_len - *offset), |
| (*offset - start_offset)); |
| DEBUGMSG(("dumpv_send", " NULL\n")); |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| /** |
| * @internal |
| * builds an ASN object containing an bitstring. |
| * |
| * @see asn_build_bitstring |
| * |
| * @param pkt IN/OUT address of the begining of the buffer. |
| * @param pkt_len IN/OUT address to an integer containing the size of pkt. |
| * @param offset IN/OUT offset to the start of the buffer where to write |
| * @param r IN if not zero reallocate the buffer to fit the |
| * needed size. |
| * @param type IN - type of object |
| * @param string IN - pointer to the string |
| * @param strlength IN - length of the input |
| * |
| * @return 1 on success, 0 on error |
| */ |
| |
| int |
| asn_realloc_rbuild_bitstring(u_char ** pkt, size_t * pkt_len, |
| size_t * offset, int r, |
| u_char type, |
| const u_char * str, size_t strlength) |
| { |
| /* |
| * ASN.1 bit string ::= 0x03 asnlength unused {byte}* |
| */ |
| static const char *errpre = "build bitstring"; |
| size_t start_offset = *offset; |
| |
| while ((*pkt_len - *offset) < strlength) { |
| if (!(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| } |
| |
| *offset += strlength; |
| memcpy(*pkt + *pkt_len - *offset, str, strlength); |
| |
| if (asn_realloc_rbuild_header |
| (pkt, pkt_len, offset, r, type, strlength)) { |
| if (_asn_realloc_build_header_check |
| (errpre, pkt, pkt_len, strlength)) { |
| return 0; |
| } else { |
| DEBUGDUMPSETUP("send", (*pkt + *pkt_len - *offset), |
| *offset - start_offset); |
| DEBUGIF("dumpv_send") { |
| if (strlength == 0) { |
| DEBUGMSG(("dumpv_send", " Bitstring: [NULL]\n")); |
| } else { |
| u_char *buf = (u_char *) malloc(2 * strlength); |
| size_t l = |
| (buf != NULL) ? (2 * strlength) : 0, ol = 0; |
| |
| if (sprint_realloc_asciistring |
| (&buf, &l, &ol, 1, str, strlength)) { |
| DEBUGMSG(("dumpv_send", " Bitstring:\t%s\n", |
| buf)); |
| } else { |
| if (buf == NULL) { |
| DEBUGMSG(("dumpv_send", |
| " Bitstring:\t[TRUNCATED]\n")); |
| } else { |
| DEBUGMSG(("dumpv_send", |
| " Bitstring:\t%s [TRUNCATED]\n", |
| buf)); |
| } |
| } |
| if (buf != NULL) { |
| free(buf); |
| } |
| } |
| } |
| } |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * @internal |
| * builds an ASN object containing an unsigned int64. |
| * |
| * @see asn_build_unsigned_int64 |
| * |
| * @param pkt IN/OUT address of the begining of the buffer. |
| * @param pkt_len IN/OUT address to an integer containing the size of pkt. |
| * @param offset IN/OUT offset to the start of the buffer where to write |
| * @param r IN if not zero reallocate the buffer to fit the |
| * needed size. |
| * @param type IN - type of object |
| * @param cp IN - pointer to counter struct |
| * @param countersize IN - size of input buffer |
| * |
| * @return 1 on success, 0 on error |
| */ |
| int |
| asn_realloc_rbuild_unsigned_int64(u_char ** pkt, size_t * pkt_len, |
| size_t * offset, int r, |
| u_char type, |
| const struct counter64 *cp, size_t countersize) |
| { |
| /* |
| * ASN.1 integer ::= 0x02 asnlength byte {byte}* |
| */ |
| register u_long low = cp->low, high = cp->high; |
| size_t intsize, start_offset = *offset; |
| int count; |
| |
| if (countersize != sizeof(struct counter64)) { |
| _asn_size_err("build uint64", countersize, |
| sizeof(struct counter64)); |
| return 0; |
| } |
| |
| CHECK_OVERFLOW_U(high,13); |
| CHECK_OVERFLOW_U(low,13); |
| |
| /* |
| * Encode the low 4 bytes first. |
| */ |
| if (((*pkt_len - *offset) < 1) && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) low; |
| low >>= 8; |
| count = 1; |
| |
| while (low != 0) { |
| count++; |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) low; |
| low >>= 8; |
| } |
| |
| /* |
| * Then the high byte if present. |
| */ |
| if (high) { |
| /* |
| * Do the rest of the low byte. |
| */ |
| for (; count < 4; count++) { |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = 0; |
| } |
| |
| /* |
| * Do high byte. |
| */ |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) high; |
| high >>= 8; |
| |
| while (high != 0) { |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) high; |
| high >>= 8; |
| } |
| } |
| |
| if ((*(*pkt + *pkt_len - *offset) & 0x80) != (0 & 0x80)) { |
| /* |
| * Make sure left most bit is representational of the rest of the bits |
| * that aren't encoded. |
| */ |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = 0; |
| } |
| |
| intsize = *offset - start_offset; |
| |
| #ifdef NETSNMP_WITH_OPAQUE_SPECIAL_TYPES |
| /* |
| * Encode a Counter64 as an opaque (it also works in SNMPv1). |
| */ |
| if (type == ASN_OPAQUE_COUNTER64) { |
| while ((*pkt_len - *offset) < 5) { |
| if (!(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| } |
| |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) intsize; |
| *(*pkt + *pkt_len - (++*offset)) = ASN_OPAQUE_COUNTER64; |
| *(*pkt + *pkt_len - (++*offset)) = ASN_OPAQUE_TAG1; |
| |
| /* |
| * Put the tag and length for the Opaque wrapper. |
| */ |
| if (asn_realloc_rbuild_header(pkt, pkt_len, offset, r, |
| ASN_OPAQUE, intsize + 3)) { |
| if (_asn_realloc_build_header_check |
| ("build counter u64", pkt, pkt_len, intsize + 3)) { |
| return 0; |
| } |
| } else { |
| return 0; |
| } |
| } else if (type == ASN_OPAQUE_U64) { |
| /* |
| * Encode the Unsigned int64 in an opaque. |
| */ |
| while ((*pkt_len - *offset) < 5) { |
| if (!(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| } |
| |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) intsize; |
| *(*pkt + *pkt_len - (++*offset)) = ASN_OPAQUE_U64; |
| *(*pkt + *pkt_len - (++*offset)) = ASN_OPAQUE_TAG1; |
| |
| /* |
| * Put the tag and length for the Opaque wrapper. |
| */ |
| if (asn_realloc_rbuild_header(pkt, pkt_len, offset, r, |
| ASN_OPAQUE, intsize + 3)) { |
| if (_asn_realloc_build_header_check |
| ("build counter u64", pkt, pkt_len, intsize + 3)) { |
| return 0; |
| } |
| } else { |
| return 0; |
| } |
| } else { |
| |
| #endif /* NETSNMP_WITH_OPAQUE_SPECIAL_TYPES */ |
| if (asn_realloc_rbuild_header |
| (pkt, pkt_len, offset, r, type, intsize)) { |
| if (_asn_realloc_build_header_check |
| ("build uint64", pkt, pkt_len, intsize)) { |
| return 0; |
| } |
| } else { |
| return 0; |
| } |
| #ifdef NETSNMP_WITH_OPAQUE_SPECIAL_TYPES |
| } |
| #endif /* NETSNMP_WITH_OPAQUE_SPECIAL_TYPES */ |
| |
| DEBUGDUMPSETUP("send", (*pkt + *pkt_len - *offset), intsize); |
| DEBUGMSG(("dumpv_send", " U64:\t%lu %lu\n", cp->high, cp->low)); |
| return 1; |
| } |
| |
| #ifdef NETSNMP_WITH_OPAQUE_SPECIAL_TYPES |
| |
| |
| /** |
| * @internal |
| * builds an ASN object containing an signed int64. |
| * |
| * @see asn_build_signed_int64 |
| * |
| * @param pkt IN/OUT address of the begining of the buffer. |
| * @param pkt_len IN/OUT address to an integer containing the size of pkt. |
| * @param offset IN/OUT offset to the start of the buffer where to write |
| * @param r IN if not zero reallocate the buffer to fit the |
| * needed size. |
| * @param type IN - type of object |
| * @param cp IN - pointer to counter struct |
| * @param countersize IN - size of input buffer |
| * |
| * @return 1 on success, 0 on error |
| */ |
| int |
| asn_realloc_rbuild_signed_int64(u_char ** pkt, size_t * pkt_len, |
| size_t * offset, int r, |
| u_char type, |
| const struct counter64 *cp, size_t countersize) |
| { |
| /* |
| * ASN.1 integer ::= 0x02 asnlength byte {byte}* |
| */ |
| register int32_t low = cp->low, high = cp->high; |
| size_t intsize, start_offset = *offset; |
| int count; |
| int32_t testvalue = (high & 0x80000000) ? -1 : 0; |
| |
| if (countersize != sizeof(struct counter64)) { |
| _asn_size_err("build uint64", countersize, |
| sizeof(struct counter64)); |
| return 0; |
| } |
| |
| CHECK_OVERFLOW_S(high,14); |
| CHECK_OVERFLOW_U(low,14); |
| |
| /* |
| * Encode the low 4 bytes first. |
| */ |
| if (((*pkt_len - *offset) < 1) && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) low; |
| low >>= 8; |
| count = 1; |
| |
| while ((int) low != testvalue && count < 4) { |
| count++; |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) low; |
| low >>= 8; |
| } |
| |
| /* |
| * Then the high byte if present. |
| */ |
| if (high != testvalue) { |
| /* |
| * Do the rest of the low byte. |
| */ |
| for (; count < 4; count++) { |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (testvalue == 0) ? 0 : 0xff; |
| } |
| |
| /* |
| * Do high byte. |
| */ |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) high; |
| high >>= 8; |
| |
| while ((int) high != testvalue) { |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) high; |
| high >>= 8; |
| } |
| } |
| |
| if ((*(*pkt + *pkt_len - *offset) & 0x80) != (testvalue & 0x80)) { |
| /* |
| * Make sure left most bit is representational of the rest of the bits |
| * that aren't encoded. |
| */ |
| if (((*pkt_len - *offset) < 1) |
| && !(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| *(*pkt + *pkt_len - (++*offset)) = (testvalue == 0) ? 0 : 0xff; |
| } |
| |
| intsize = *offset - start_offset; |
| |
| while ((*pkt_len - *offset) < 5) { |
| if (!(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| } |
| |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) intsize; |
| *(*pkt + *pkt_len - (++*offset)) = ASN_OPAQUE_I64; |
| *(*pkt + *pkt_len - (++*offset)) = ASN_OPAQUE_TAG1; |
| |
| /* |
| * Put the tag and length for the Opaque wrapper. |
| */ |
| if (asn_realloc_rbuild_header(pkt, pkt_len, offset, r, |
| ASN_OPAQUE, intsize + 3)) { |
| if (_asn_realloc_build_header_check |
| ("build counter u64", pkt, pkt_len, intsize + 3)) { |
| return 0; |
| } |
| } else { |
| return 0; |
| } |
| |
| DEBUGDUMPSETUP("send", (*pkt + *pkt_len - *offset), intsize); |
| DEBUGMSG(("dumpv_send", " UInt64:\t%lu %lu\n", cp->high, cp->low)); |
| return 1; |
| } |
| |
| /** |
| * @internal |
| * builds an ASN object containing an float. |
| * |
| * @see asn_build_float |
| * |
| * @param pkt IN/OUT address of the begining of the buffer. |
| * @param pkt_len IN/OUT address to an integer containing the size of pkt. |
| * @param offset IN/OUT offset to the start of the buffer where to write |
| * @param r IN if not zero reallocate the buffer to fit the |
| * needed size. |
| * @param type IN - type of object |
| * @param floatp IN - pointer to the float |
| * @param floatsize IN - size of input buffer |
| * |
| * @return 1 on success, 0 on error |
| */ |
| |
| int |
| asn_realloc_rbuild_float(u_char ** pkt, size_t * pkt_len, |
| size_t * offset, int r, |
| u_char type, const float *floatp, size_t floatsize) |
| { |
| size_t start_offset = *offset; |
| union { |
| float floatVal; |
| int intVal; |
| u_char c[sizeof(float)]; |
| } fu; |
| |
| /* |
| * Floatsize better not be larger than realistic. |
| */ |
| if (floatsize != sizeof(float) || floatsize > 122) { |
| return 0; |
| } |
| |
| while ((*pkt_len - *offset) < floatsize + 3) { |
| if (!(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| } |
| |
| /* |
| * Correct for endian differences and copy value. |
| */ |
| fu.floatVal = *floatp; |
| fu.intVal = htonl(fu.intVal); |
| *offset += floatsize; |
| memcpy(*pkt + *pkt_len - *offset, &(fu.c[0]), floatsize); |
| |
| /* |
| * Put the special tag and length (3 bytes). |
| */ |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) floatsize; |
| *(*pkt + *pkt_len - (++*offset)) = ASN_OPAQUE_FLOAT; |
| *(*pkt + *pkt_len - (++*offset)) = ASN_OPAQUE_TAG1; |
| |
| /* |
| * Put the tag and length for the Opaque wrapper. |
| */ |
| if (asn_realloc_rbuild_header(pkt, pkt_len, offset, r, |
| ASN_OPAQUE, floatsize + 3)) { |
| if (_asn_realloc_build_header_check("build float", pkt, pkt_len, |
| floatsize + 3)) { |
| return 0; |
| } else { |
| DEBUGDUMPSETUP("send", (*pkt + *pkt_len - *offset), |
| *offset - start_offset); |
| DEBUGMSG(("dumpv_send", "Opaque Float:\t%f\n", *floatp)); |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * @internal |
| * builds an ASN object containing an double. |
| * |
| * @see asn_build_double |
| * |
| * @param pkt IN/OUT address of the begining of the buffer. |
| * @param pkt_len IN/OUT address to an integer containing the size of pkt. |
| * @param offset IN/OUT offset to the start of the buffer where to write |
| * @param r IN if not zero reallocate the buffer to fit the |
| * needed size. |
| * @param type IN - type of object |
| * @param doublep IN - pointer to double |
| * @param doublesize IN - size of input buffer |
| * |
| * @return 1 on success, 0 on error |
| */ |
| |
| int |
| asn_realloc_rbuild_double(u_char ** pkt, size_t * pkt_len, |
| size_t * offset, int r, |
| u_char type, const double *doublep, size_t doublesize) |
| { |
| size_t start_offset = *offset; |
| long tmp; |
| union { |
| double doubleVal; |
| int intVal[2]; |
| u_char c[sizeof(double)]; |
| } fu; |
| |
| /* |
| * Doublesize better not be larger than realistic. |
| */ |
| if (doublesize != sizeof(double) || doublesize > 122) { |
| return 0; |
| } |
| |
| while ((*pkt_len - *offset) < doublesize + 3) { |
| if (!(r && asn_realloc(pkt, pkt_len))) { |
| return 0; |
| } |
| } |
| |
| /* |
| * Correct for endian differences and copy value. |
| */ |
| fu.doubleVal = *doublep; |
| tmp = htonl(fu.intVal[0]); |
| fu.intVal[0] = htonl(fu.intVal[1]); |
| fu.intVal[1] = tmp; |
| *offset += doublesize; |
| memcpy(*pkt + *pkt_len - *offset, &(fu.c[0]), doublesize); |
| |
| /* |
| * Put the special tag and length (3 bytes). |
| */ |
| *(*pkt + *pkt_len - (++*offset)) = (u_char) doublesize; |
| *(*pkt + *pkt_len - (++*offset)) = ASN_OPAQUE_DOUBLE; |
| *(*pkt + *pkt_len - (++*offset)) = ASN_OPAQUE_TAG1; |
| |
| /* |
| * Put the tag and length for the Opaque wrapper. |
| */ |
| if (asn_realloc_rbuild_header(pkt, pkt_len, offset, r, |
| ASN_OPAQUE, doublesize + 3)) { |
| if (_asn_realloc_build_header_check("build float", pkt, pkt_len, |
| doublesize + 3)) { |
| return 0; |
| } else { |
| DEBUGDUMPSETUP("send", (*pkt + *pkt_len - *offset), |
| *offset - start_offset); |
| DEBUGMSG(("dumpv_send", " Opaque Double:\t%f\n", *doublep)); |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| #endif /* NETSNMP_WITH_OPAQUE_SPECIAL_TYPES */ |
| #endif /* NETSNMP_USE_REVERSE_ASNENCODING */ |
| /** |
| * @} |
| */ |