| RFC1213-MIB DEFINITIONS ::= BEGIN |
| |
| IMPORTS |
| mgmt, NetworkAddress, IpAddress, Counter, Gauge, |
| TimeTicks |
| FROM RFC1155-SMI |
| OBJECT-TYPE |
| FROM RFC-1212; |
| |
| -- This MIB module uses the extended OBJECT-TYPE macro as |
| -- defined in [14]; |
| |
| -- MIB-II (same prefix as MIB-I) |
| |
| mib-2 OBJECT IDENTIFIER ::= { mgmt 1 } |
| |
| -- textual conventions |
| |
| DisplayString ::= |
| OCTET STRING |
| -- This data type is used to model textual information taken |
| -- from the NVT ASCII character set. By convention, objects |
| -- with this syntax are declared as having |
| |
| -- |
| -- SIZE (0..255) |
| |
| PhysAddress ::= |
| OCTET STRING |
| -- This data type is used to model media addresses. For many |
| -- types of media, this will be in a binary representation. |
| -- For example, an ethernet address would be represented as |
| -- a string of 6 octets. |
| |
| -- groups in MIB-II |
| |
| system OBJECT IDENTIFIER ::= { mib-2 1 } |
| |
| interfaces OBJECT IDENTIFIER ::= { mib-2 2 } |
| |
| at OBJECT IDENTIFIER ::= { mib-2 3 } |
| |
| ip OBJECT IDENTIFIER ::= { mib-2 4 } |
| |
| icmp OBJECT IDENTIFIER ::= { mib-2 5 } |
| |
| tcp OBJECT IDENTIFIER ::= { mib-2 6 } |
| |
| udp OBJECT IDENTIFIER ::= { mib-2 7 } |
| |
| egp OBJECT IDENTIFIER ::= { mib-2 8 } |
| |
| -- historical (some say hysterical) |
| -- cmot OBJECT IDENTIFIER ::= { mib-2 9 } |
| |
| transmission OBJECT IDENTIFIER ::= { mib-2 10 } |
| |
| snmp OBJECT IDENTIFIER ::= { mib-2 11 } |
| |
| -- the System group |
| |
| -- Implementation of the System group is mandatory for all |
| -- systems. If an agent is not configured to have a value |
| -- for any of these variables, a string of length 0 is |
| -- returned. |
| |
| sysDescr OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "A textual description of the entity. This value |
| should include the full name and version |
| identification of the system's hardware type, |
| software operating-system, and networking |
| software. It is mandatory that this only contain |
| printable ASCII characters." |
| ::= { system 1 } |
| |
| sysObjectID OBJECT-TYPE |
| SYNTAX OBJECT IDENTIFIER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The vendor's authoritative identification of the |
| network management subsystem contained in the |
| entity. This value is allocated within the SMI |
| enterprises subtree (1.3.6.1.4.1) and provides an |
| easy and unambiguous means for determining `what |
| kind of box' is being managed. For example, if |
| vendor `Flintstones, Inc.' was assigned the |
| subtree 1.3.6.1.4.1.4242, it could assign the |
| identifier 1.3.6.1.4.1.4242.1.1 to its `Fred |
| Router'." |
| ::= { system 2 } |
| |
| sysUpTime OBJECT-TYPE |
| SYNTAX TimeTicks |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The time (in hundredths of a second) since the |
| network management portion of the system was last |
| re-initialized." |
| ::= { system 3 } |
| |
| sysContact OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The textual identification of the contact person |
| for this managed node, together with information |
| on how to contact this person." |
| ::= { system 4 } |
| |
| sysName OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "An administratively-assigned name for this |
| managed node. By convention, this is the node's |
| fully-qualified domain name." |
| ::= { system 5 } |
| |
| sysLocation OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The physical location of this node (e.g., |
| `telephone closet, 3rd floor')." |
| ::= { system 6 } |
| |
| sysServices OBJECT-TYPE |
| SYNTAX INTEGER (0..127) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "A value which indicates the set of services that |
| this entity primarily offers. |
| |
| The value is a sum. This sum initially takes the |
| value zero, Then, for each layer, L, in the range |
| 1 through 7, that this node performs transactions |
| for, 2 raised to (L - 1) is added to the sum. For |
| example, a node which performs primarily routing |
| functions would have a value of 4 (2^(3-1)). In |
| contrast, a node which is a host offering |
| application services would have a value of 72 |
| (2^(4-1) + 2^(7-1)). Note that in the context of |
| the Internet suite of protocols, values should be |
| calculated accordingly: |
| |
| layer functionality |
| 1 physical (e.g., repeaters) |
| 2 datalink/subnetwork (e.g., bridges) |
| 3 internet (e.g., IP gateways) |
| 4 end-to-end (e.g., IP hosts) |
| 7 applications (e.g., mail relays) |
| |
| For systems including OSI protocols, layers 5 and |
| 6 may also be counted." |
| ::= { system 7 } |
| |
| -- the Interfaces group |
| |
| -- Implementation of the Interfaces group is mandatory for |
| -- all systems. |
| |
| ifNumber OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of network interfaces (regardless of |
| their current state) present on this system." |
| ::= { interfaces 1 } |
| |
| -- the Interfaces table |
| |
| -- The Interfaces table contains information on the entity's |
| -- interfaces. Each interface is thought of as being |
| -- attached to a `subnetwork'. Note that this term should |
| -- not be confused with `subnet' which refers to an |
| -- addressing partitioning scheme used in the Internet suite |
| -- of protocols. |
| |
| ifTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF IfEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "A list of interface entries. The number of |
| entries is given by the value of ifNumber." |
| ::= { interfaces 2 } |
| |
| ifEntry OBJECT-TYPE |
| SYNTAX IfEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "An interface entry containing objects at the |
| subnetwork layer and below for a particular |
| interface." |
| INDEX { ifIndex } |
| ::= { ifTable 1 } |
| |
| IfEntry ::= |
| SEQUENCE { |
| ifIndex |
| INTEGER, |
| ifDescr |
| DisplayString, |
| ifType |
| INTEGER, |
| ifMtu |
| INTEGER, |
| ifSpeed |
| Gauge, |
| ifPhysAddress |
| PhysAddress, |
| ifAdminStatus |
| INTEGER, |
| ifOperStatus |
| INTEGER, |
| ifLastChange |
| TimeTicks, |
| ifInOctets |
| Counter, |
| ifInUcastPkts |
| Counter, |
| ifInNUcastPkts |
| Counter, |
| ifInDiscards |
| Counter, |
| ifInErrors |
| Counter, |
| ifInUnknownProtos |
| Counter, |
| ifOutOctets |
| Counter, |
| ifOutUcastPkts |
| Counter, |
| ifOutNUcastPkts |
| Counter, |
| ifOutDiscards |
| Counter, |
| ifOutErrors |
| Counter, |
| ifOutQLen |
| Gauge, |
| ifSpecific |
| OBJECT IDENTIFIER |
| } |
| |
| ifIndex OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "A unique value for each interface. Its value |
| ranges between 1 and the value of ifNumber. The |
| value for each interface must remain constant at |
| least from one re-initialization of the entity's |
| network management system to the next re- |
| initialization." |
| ::= { ifEntry 1 } |
| |
| ifDescr OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "A textual string containing information about the |
| interface. This string should include the name of |
| the manufacturer, the product name and the version |
| of the hardware interface." |
| ::= { ifEntry 2 } |
| |
| ifType OBJECT-TYPE |
| SYNTAX INTEGER { |
| other(1), -- none of the following |
| regular1822(2), |
| hdh1822(3), |
| ddn-x25(4), |
| rfc877-x25(5), |
| ethernet-csmacd(6), |
| iso88023-csmacd(7), |
| iso88024-tokenBus(8), |
| iso88025-tokenRing(9), |
| iso88026-man(10), |
| starLan(11), |
| proteon-10Mbit(12), |
| proteon-80Mbit(13), |
| hyperchannel(14), |
| fddi(15), |
| lapb(16), |
| sdlc(17), |
| ds1(18), -- T-1 |
| e1(19), -- european equiv. of T-1 |
| basicISDN(20), |
| primaryISDN(21), -- proprietary serial |
| propPointToPointSerial(22), |
| ppp(23), |
| softwareLoopback(24), |
| eon(25), -- CLNP over IP [11] |
| ethernet-3Mbit(26), |
| nsip(27), -- XNS over IP |
| slip(28), -- generic SLIP |
| ultra(29), -- ULTRA technologies |
| ds3(30), -- T-3 |
| sip(31), -- SMDS |
| frame-relay(32) |
| } |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The type of interface, distinguished according to |
| the physical/link protocol(s) immediately `below' |
| the network layer in the protocol stack." |
| ::= { ifEntry 3 } |
| |
| ifMtu OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The size of the largest datagram which can be |
| sent/received on the interface, specified in |
| octets. For interfaces that are used for |
| transmitting network datagrams, this is the size |
| of the largest network datagram that can be sent |
| on the interface." |
| ::= { ifEntry 4 } |
| |
| ifSpeed OBJECT-TYPE |
| SYNTAX Gauge |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "An estimate of the interface's current bandwidth |
| in bits per second. For interfaces which do not |
| vary in bandwidth or for those where no accurate |
| estimation can be made, this object should contain |
| the nominal bandwidth." |
| ::= { ifEntry 5 } |
| |
| ifPhysAddress OBJECT-TYPE |
| SYNTAX PhysAddress |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The interface's address at the protocol layer |
| immediately `below' the network layer in the |
| protocol stack. For interfaces which do not have |
| |
| such an address (e.g., a serial line), this object |
| should contain an octet string of zero length." |
| ::= { ifEntry 6 } |
| |
| ifAdminStatus OBJECT-TYPE |
| SYNTAX INTEGER { |
| up(1), -- ready to pass packets |
| down(2), |
| testing(3) -- in some test mode |
| } |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The desired state of the interface. The |
| testing(3) state indicates that no operational |
| packets can be passed." |
| ::= { ifEntry 7 } |
| |
| ifOperStatus OBJECT-TYPE |
| SYNTAX INTEGER { |
| up(1), -- ready to pass packets |
| down(2), |
| testing(3) -- in some test mode |
| } |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The current operational state of the interface. |
| The testing(3) state indicates that no operational |
| packets can be passed." |
| ::= { ifEntry 8 } |
| |
| ifLastChange OBJECT-TYPE |
| SYNTAX TimeTicks |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The value of sysUpTime at the time the interface |
| entered its current operational state. If the |
| current state was entered prior to the last re- |
| initialization of the local network management |
| subsystem, then this object contains a zero |
| value." |
| ::= { ifEntry 9 } |
| |
| ifInOctets OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of octets received on the |
| interface, including framing characters." |
| ::= { ifEntry 10 } |
| |
| ifInUcastPkts OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of subnetwork-unicast packets |
| delivered to a higher-layer protocol." |
| ::= { ifEntry 11 } |
| |
| ifInNUcastPkts OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of non-unicast (i.e., subnetwork- |
| broadcast or subnetwork-multicast) packets |
| delivered to a higher-layer protocol." |
| ::= { ifEntry 12 } |
| |
| ifInDiscards OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of inbound packets which were chosen |
| to be discarded even though no errors had been |
| detected to prevent their being deliverable to a |
| higher-layer protocol. One possible reason for |
| discarding such a packet could be to free up |
| buffer space." |
| ::= { ifEntry 13 } |
| |
| ifInErrors OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of inbound packets that contained |
| errors preventing them from being deliverable to a |
| higher-layer protocol." |
| ::= { ifEntry 14 } |
| |
| ifInUnknownProtos OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of packets received via the interface |
| which were discarded because of an unknown or |
| unsupported protocol." |
| ::= { ifEntry 15 } |
| |
| ifOutOctets OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of octets transmitted out of the |
| interface, including framing characters." |
| ::= { ifEntry 16 } |
| |
| ifOutUcastPkts OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of packets that higher-level |
| protocols requested be transmitted to a |
| subnetwork-unicast address, including those that |
| were discarded or not sent." |
| ::= { ifEntry 17 } |
| |
| ifOutNUcastPkts OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of packets that higher-level |
| protocols requested be transmitted to a non- |
| unicast (i.e., a subnetwork-broadcast or |
| subnetwork-multicast) address, including those |
| that were discarded or not sent." |
| ::= { ifEntry 18 } |
| |
| ifOutDiscards OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of outbound packets which were chosen |
| |
| to be discarded even though no errors had been |
| detected to prevent their being transmitted. One |
| possible reason for discarding such a packet could |
| be to free up buffer space." |
| ::= { ifEntry 19 } |
| |
| ifOutErrors OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of outbound packets that could not be |
| transmitted because of errors." |
| ::= { ifEntry 20 } |
| |
| ifOutQLen OBJECT-TYPE |
| SYNTAX Gauge |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The length of the output packet queue (in |
| packets)." |
| ::= { ifEntry 21 } |
| |
| ifSpecific OBJECT-TYPE |
| SYNTAX OBJECT IDENTIFIER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "A reference to MIB definitions specific to the |
| particular media being used to realize the |
| interface. For example, if the interface is |
| realized by an ethernet, then the value of this |
| object refers to a document defining objects |
| specific to ethernet. If this information is not |
| present, its value should be set to the OBJECT |
| IDENTIFIER { 0 0 }, which is a syntatically valid |
| object identifier, and any conformant |
| implementation of ASN.1 and BER must be able to |
| generate and recognize this value." |
| ::= { ifEntry 22 } |
| |
| -- the Address Translation group |
| |
| -- Implementation of the Address Translation group is |
| -- mandatory for all systems. Note however that this group |
| -- is deprecated by MIB-II. That is, it is being included |
| |
| -- solely for compatibility with MIB-I nodes, and will most |
| -- likely be excluded from MIB-III nodes. From MIB-II and |
| -- onwards, each network protocol group contains its own |
| -- address translation tables. |
| |
| -- The Address Translation group contains one table which is |
| -- the union across all interfaces of the translation tables |
| -- for converting a NetworkAddress (e.g., an IP address) into |
| -- a subnetwork-specific address. For lack of a better term, |
| -- this document refers to such a subnetwork-specific address |
| -- as a `physical' address. |
| |
| -- Examples of such translation tables are: for broadcast |
| -- media where ARP is in use, the translation table is |
| -- equivalent to the ARP cache; or, on an X.25 network where |
| -- non-algorithmic translation to X.121 addresses is |
| -- required, the translation table contains the |
| -- NetworkAddress to X.121 address equivalences. |
| |
| atTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF AtEntry |
| ACCESS not-accessible |
| STATUS deprecated |
| DESCRIPTION |
| "The Address Translation tables contain the |
| NetworkAddress to `physical' address equivalences. |
| Some interfaces do not use translation tables for |
| determining address equivalences (e.g., DDN-X.25 |
| has an algorithmic method); if all interfaces are |
| of this type, then the Address Translation table |
| is empty, i.e., has zero entries." |
| ::= { at 1 } |
| |
| atEntry OBJECT-TYPE |
| SYNTAX AtEntry |
| ACCESS not-accessible |
| STATUS deprecated |
| DESCRIPTION |
| "Each entry contains one NetworkAddress to |
| `physical' address equivalence." |
| INDEX { atIfIndex, |
| atNetAddress } |
| ::= { atTable 1 } |
| |
| AtEntry ::= |
| SEQUENCE { |
| atIfIndex |
| INTEGER, |
| atPhysAddress |
| PhysAddress, |
| atNetAddress |
| NetworkAddress |
| } |
| |
| atIfIndex OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS deprecated |
| DESCRIPTION |
| "The interface on which this entry's equivalence |
| is effective. The interface identified by a |
| particular value of this index is the same |
| interface as identified by the same value of |
| ifIndex." |
| ::= { atEntry 1 } |
| |
| atPhysAddress OBJECT-TYPE |
| SYNTAX PhysAddress |
| ACCESS read-write |
| STATUS deprecated |
| DESCRIPTION |
| "The media-dependent `physical' address. |
| |
| Setting this object to a null string (one of zero |
| length) has the effect of invaliding the |
| corresponding entry in the atTable object. That |
| is, it effectively dissasociates the interface |
| identified with said entry from the mapping |
| identified with said entry. It is an |
| implementation-specific matter as to whether the |
| agent removes an invalidated entry from the table. |
| Accordingly, management stations must be prepared |
| to receive tabular information from agents that |
| corresponds to entries not currently in use. |
| Proper interpretation of such entries requires |
| examination of the relevant atPhysAddress object." |
| ::= { atEntry 2 } |
| |
| atNetAddress OBJECT-TYPE |
| SYNTAX NetworkAddress |
| ACCESS read-write |
| STATUS deprecated |
| DESCRIPTION |
| "The NetworkAddress (e.g., the IP address) |
| corresponding to the media-dependent `physical' |
| address." |
| ::= { atEntry 3 } |
| |
| -- the IP group |
| |
| -- Implementation of the IP group is mandatory for all |
| -- systems. |
| |
| ipForwarding OBJECT-TYPE |
| SYNTAX INTEGER { |
| forwarding(1), -- acting as a gateway |
| not-forwarding(2) -- NOT acting as a gateway |
| } |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The indication of whether this entity is acting |
| as an IP gateway in respect to the forwarding of |
| datagrams received by, but not addressed to, this |
| entity. IP gateways forward datagrams. IP hosts |
| do not (except those source-routed via the host). |
| |
| Note that for some managed nodes, this object may |
| take on only a subset of the values possible. |
| Accordingly, it is appropriate for an agent to |
| return a `badValue' response if a management |
| station attempts to change this object to an |
| inappropriate value." |
| ::= { ip 1 } |
| |
| ipDefaultTTL OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The default value inserted into the Time-To-Live |
| field of the IP header of datagrams originated at |
| this entity, whenever a TTL value is not supplied |
| by the transport layer protocol." |
| ::= { ip 2 } |
| |
| ipInReceives OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of input datagrams received from |
| interfaces, including those received in error." |
| ::= { ip 3 } |
| |
| ipInHdrErrors OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of input datagrams discarded due to |
| errors in their IP headers, including bad |
| checksums, version number mismatch, other format |
| errors, time-to-live exceeded, errors discovered |
| in processing their IP options, etc." |
| ::= { ip 4 } |
| |
| ipInAddrErrors OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of input datagrams discarded because |
| the IP address in their IP header's destination |
| field was not a valid address to be received at |
| this entity. This count includes invalid |
| addresses (e.g., 0.0.0.0) and addresses of |
| unsupported Classes (e.g., Class E). For entities |
| which are not IP Gateways and therefore do not |
| forward datagrams, this counter includes datagrams |
| discarded because the destination address was not |
| a local address." |
| ::= { ip 5 } |
| |
| ipForwDatagrams OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of input datagrams for which this |
| entity was not their final IP destination, as a |
| result of which an attempt was made to find a |
| route to forward them to that final destination. |
| In entities which do not act as IP Gateways, this |
| counter will include only those packets which were |
| Source-Routed via this entity, and the Source- |
| Route option processing was successful." |
| ::= { ip 6 } |
| |
| ipInUnknownProtos OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of locally-addressed datagrams |
| received successfully but discarded because of an |
| unknown or unsupported protocol." |
| ::= { ip 7 } |
| |
| ipInDiscards OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of input IP datagrams for which no |
| problems were encountered to prevent their |
| continued processing, but which were discarded |
| (e.g., for lack of buffer space). Note that this |
| counter does not include any datagrams discarded |
| while awaiting re-assembly." |
| ::= { ip 8 } |
| |
| ipInDelivers OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of input datagrams successfully |
| delivered to IP user-protocols (including ICMP)." |
| ::= { ip 9 } |
| |
| ipOutRequests OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of IP datagrams which local IP |
| user-protocols (including ICMP) supplied to IP in |
| requests for transmission. Note that this counter |
| does not include any datagrams counted in |
| ipForwDatagrams." |
| ::= { ip 10 } |
| |
| ipOutDiscards OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of output IP datagrams for which no |
| |
| problem was encountered to prevent their |
| transmission to their destination, but which were |
| discarded (e.g., for lack of buffer space). Note |
| that this counter would include datagrams counted |
| in ipForwDatagrams if any such packets met this |
| (discretionary) discard criterion." |
| ::= { ip 11 } |
| |
| ipOutNoRoutes OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of IP datagrams discarded because no |
| route could be found to transmit them to their |
| destination. Note that this counter includes any |
| packets counted in ipForwDatagrams which meet this |
| `no-route' criterion. Note that this includes any |
| datagarms which a host cannot route because all of |
| its default gateways are down." |
| ::= { ip 12 } |
| |
| ipReasmTimeout OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The maximum number of seconds which received |
| fragments are held while they are awaiting |
| reassembly at this entity." |
| ::= { ip 13 } |
| |
| ipReasmReqds OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of IP fragments received which needed |
| to be reassembled at this entity." |
| ::= { ip 14 } |
| |
| ipReasmOKs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of IP datagrams successfully re- |
| assembled." |
| ::= { ip 15 } |
| |
| ipReasmFails OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of failures detected by the IP re- |
| assembly algorithm (for whatever reason: timed |
| out, errors, etc). Note that this is not |
| necessarily a count of discarded IP fragments |
| since some algorithms (notably the algorithm in |
| RFC 815) can lose track of the number of fragments |
| by combining them as they are received." |
| ::= { ip 16 } |
| |
| ipFragOKs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of IP datagrams that have been |
| successfully fragmented at this entity." |
| ::= { ip 17 } |
| |
| ipFragFails OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of IP datagrams that have been |
| discarded because they needed to be fragmented at |
| this entity but could not be, e.g., because their |
| Don't Fragment flag was set." |
| ::= { ip 18 } |
| |
| ipFragCreates OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of IP datagram fragments that have |
| been generated as a result of fragmentation at |
| this entity." |
| ::= { ip 19 } |
| |
| -- the IP address table |
| |
| -- The IP address table contains this entity's IP addressing |
| -- information. |
| |
| ipAddrTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF IpAddrEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "The table of addressing information relevant to |
| this entity's IP addresses." |
| ::= { ip 20 } |
| |
| ipAddrEntry OBJECT-TYPE |
| SYNTAX IpAddrEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "The addressing information for one of this |
| entity's IP addresses." |
| INDEX { ipAdEntAddr } |
| ::= { ipAddrTable 1 } |
| |
| IpAddrEntry ::= |
| SEQUENCE { |
| ipAdEntAddr |
| IpAddress, |
| ipAdEntIfIndex |
| INTEGER, |
| ipAdEntNetMask |
| IpAddress, |
| ipAdEntBcastAddr |
| INTEGER, |
| ipAdEntReasmMaxSize |
| INTEGER (0..65535) |
| } |
| |
| ipAdEntAddr OBJECT-TYPE |
| SYNTAX IpAddress |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The IP address to which this entry's addressing |
| information pertains." |
| ::= { ipAddrEntry 1 } |
| |
| ipAdEntIfIndex OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The index value which uniquely identifies the |
| interface to which this entry is applicable. The |
| interface identified by a particular value of this |
| index is the same interface as identified by the |
| same value of ifIndex." |
| ::= { ipAddrEntry 2 } |
| |
| ipAdEntNetMask OBJECT-TYPE |
| SYNTAX IpAddress |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The subnet mask associated with the IP address of |
| this entry. The value of the mask is an IP |
| address with all the network bits set to 1 and all |
| the hosts bits set to 0." |
| ::= { ipAddrEntry 3 } |
| |
| ipAdEntBcastAddr OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The value of the least-significant bit in the IP |
| broadcast address used for sending datagrams on |
| the (logical) interface associated with the IP |
| address of this entry. For example, when the |
| Internet standard all-ones broadcast address is |
| used, the value will be 1. This value applies to |
| both the subnet and network broadcasts addresses |
| used by the entity on this (logical) interface." |
| ::= { ipAddrEntry 4 } |
| |
| ipAdEntReasmMaxSize OBJECT-TYPE |
| SYNTAX INTEGER (0..65535) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The size of the largest IP datagram which this |
| entity can re-assemble from incoming IP fragmented |
| datagrams received on this interface." |
| ::= { ipAddrEntry 5 } |
| |
| -- the IP routing table |
| |
| -- The IP routing table contains an entry for each route |
| -- presently known to this entity. |
| |
| ipRouteTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF IpRouteEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "This entity's IP Routing table." |
| ::= { ip 21 } |
| |
| ipRouteEntry OBJECT-TYPE |
| SYNTAX IpRouteEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "A route to a particular destination." |
| INDEX { ipRouteDest } |
| ::= { ipRouteTable 1 } |
| |
| IpRouteEntry ::= |
| SEQUENCE { |
| ipRouteDest |
| IpAddress, |
| ipRouteIfIndex |
| INTEGER, |
| ipRouteMetric1 |
| INTEGER, |
| ipRouteMetric2 |
| INTEGER, |
| ipRouteMetric3 |
| INTEGER, |
| ipRouteMetric4 |
| INTEGER, |
| ipRouteNextHop |
| IpAddress, |
| ipRouteType |
| INTEGER, |
| ipRouteProto |
| INTEGER, |
| ipRouteAge |
| INTEGER, |
| ipRouteMask |
| IpAddress, |
| ipRouteMetric5 |
| INTEGER, |
| ipRouteInfo |
| OBJECT IDENTIFIER |
| } |
| |
| ipRouteDest OBJECT-TYPE |
| SYNTAX IpAddress |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The destination IP address of this route. An |
| entry with a value of 0.0.0.0 is considered a |
| default route. Multiple routes to a single |
| destination can appear in the table, but access to |
| such multiple entries is dependent on the table- |
| access mechanisms defined by the network |
| management protocol in use." |
| ::= { ipRouteEntry 1 } |
| |
| ipRouteIfIndex OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The index value which uniquely identifies the |
| local interface through which the next hop of this |
| route should be reached. The interface identified |
| by a particular value of this index is the same |
| interface as identified by the same value of |
| ifIndex." |
| ::= { ipRouteEntry 2 } |
| |
| ipRouteMetric1 OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The primary routing metric for this route. The |
| semantics of this metric are determined by the |
| routing-protocol specified in the route's |
| ipRouteProto value. If this metric is not used, |
| its value should be set to -1." |
| ::= { ipRouteEntry 3 } |
| |
| ipRouteMetric2 OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "An alternate routing metric for this route. The |
| semantics of this metric are determined by the |
| routing-protocol specified in the route's |
| ipRouteProto value. If this metric is not used, |
| its value should be set to -1." |
| ::= { ipRouteEntry 4 } |
| |
| ipRouteMetric3 OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "An alternate routing metric for this route. The |
| semantics of this metric are determined by the |
| routing-protocol specified in the route's |
| ipRouteProto value. If this metric is not used, |
| its value should be set to -1." |
| ::= { ipRouteEntry 5 } |
| |
| ipRouteMetric4 OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "An alternate routing metric for this route. The |
| semantics of this metric are determined by the |
| routing-protocol specified in the route's |
| ipRouteProto value. If this metric is not used, |
| its value should be set to -1." |
| ::= { ipRouteEntry 6 } |
| |
| ipRouteNextHop OBJECT-TYPE |
| SYNTAX IpAddress |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The IP address of the next hop of this route. |
| (In the case of a route bound to an interface |
| which is realized via a broadcast media, the value |
| of this field is the agent's IP address on that |
| interface.)" |
| ::= { ipRouteEntry 7 } |
| |
| ipRouteType OBJECT-TYPE |
| SYNTAX INTEGER { |
| other(1), -- none of the following |
| |
| invalid(2), -- an invalidated route |
| |
| -- route to directly |
| direct(3), -- connected (sub-)network |
| |
| -- route to a non-local |
| indirect(4) -- host/network/sub-network |
| } |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The type of route. Note that the values |
| direct(3) and indirect(4) refer to the notion of |
| direct and indirect routing in the IP |
| architecture. |
| |
| Setting this object to the value invalid(2) has |
| the effect of invalidating the corresponding entry |
| in the ipRouteTable object. That is, it |
| effectively dissasociates the destination |
| identified with said entry from the route |
| identified with said entry. It is an |
| implementation-specific matter as to whether the |
| agent removes an invalidated entry from the table. |
| Accordingly, management stations must be prepared |
| to receive tabular information from agents that |
| corresponds to entries not currently in use. |
| Proper interpretation of such entries requires |
| examination of the relevant ipRouteType object." |
| ::= { ipRouteEntry 8 } |
| |
| ipRouteProto OBJECT-TYPE |
| SYNTAX INTEGER { |
| other(1), -- none of the following |
| |
| -- non-protocol information, |
| -- e.g., manually configured |
| local(2), -- entries |
| |
| -- set via a network |
| netmgmt(3), -- management protocol |
| |
| -- obtained via ICMP, |
| icmp(4), -- e.g., Redirect |
| |
| -- the remaining values are |
| -- all gateway routing |
| -- protocols |
| egp(5), |
| ggp(6), |
| hello(7), |
| rip(8), |
| is-is(9), |
| es-is(10), |
| ciscoIgrp(11), |
| bbnSpfIgp(12), |
| ospf(13), |
| bgp(14) |
| } |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The routing mechanism via which this route was |
| learned. Inclusion of values for gateway routing |
| protocols is not intended to imply that hosts |
| should support those protocols." |
| ::= { ipRouteEntry 9 } |
| |
| ipRouteAge OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The number of seconds since this route was last |
| updated or otherwise determined to be correct. |
| Note that no semantics of `too old' can be implied |
| except through knowledge of the routing protocol |
| by which the route was learned." |
| ::= { ipRouteEntry 10 } |
| |
| ipRouteMask OBJECT-TYPE |
| SYNTAX IpAddress |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "Indicate the mask to be logical-ANDed with the |
| destination address before being compared to the |
| value in the ipRouteDest field. For those systems |
| that do not support arbitrary subnet masks, an |
| agent constructs the value of the ipRouteMask by |
| determining whether the value of the correspondent |
| ipRouteDest field belong to a class-A, B, or C |
| network, and then using one of: |
| |
| mask network |
| 255.0.0.0 class-A |
| 255.255.0.0 class-B |
| 255.255.255.0 class-C |
| |
| If the value of the ipRouteDest is 0.0.0.0 (a |
| default route), then the mask value is also |
| 0.0.0.0. It should be noted that all IP routing |
| subsystems implicitly use this mechanism." |
| ::= { ipRouteEntry 11 } |
| |
| ipRouteMetric5 OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "An alternate routing metric for this route. The |
| semantics of this metric are determined by the |
| routing-protocol specified in the route's |
| ipRouteProto value. If this metric is not used, |
| its value should be set to -1." |
| ::= { ipRouteEntry 12 } |
| |
| ipRouteInfo OBJECT-TYPE |
| SYNTAX OBJECT IDENTIFIER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "A reference to MIB definitions specific to the |
| particular routing protocol which is responsible |
| for this route, as determined by the value |
| specified in the route's ipRouteProto value. If |
| this information is not present, its value should |
| be set to the OBJECT IDENTIFIER { 0 0 }, which is |
| a syntatically valid object identifier, and any |
| conformant implementation of ASN.1 and BER must be |
| able to generate and recognize this value." |
| ::= { ipRouteEntry 13 } |
| |
| -- the IP Address Translation table |
| |
| -- The IP address translation table contain the IpAddress to |
| -- `physical' address equivalences. Some interfaces do not |
| -- use translation tables for determining address |
| -- equivalences (e.g., DDN-X.25 has an algorithmic method); |
| -- if all interfaces are of this type, then the Address |
| -- Translation table is empty, i.e., has zero entries. |
| |
| ipNetToMediaTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF IpNetToMediaEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "The IP Address Translation table used for mapping |
| from IP addresses to physical addresses." |
| ::= { ip 22 } |
| |
| ipNetToMediaEntry OBJECT-TYPE |
| SYNTAX IpNetToMediaEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "Each entry contains one IpAddress to `physical' |
| address equivalence." |
| INDEX { ipNetToMediaIfIndex, |
| ipNetToMediaNetAddress } |
| ::= { ipNetToMediaTable 1 } |
| |
| IpNetToMediaEntry ::= |
| SEQUENCE { |
| ipNetToMediaIfIndex |
| INTEGER, |
| ipNetToMediaPhysAddress |
| PhysAddress, |
| ipNetToMediaNetAddress |
| IpAddress, |
| ipNetToMediaType |
| INTEGER |
| } |
| |
| ipNetToMediaIfIndex OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The interface on which this entry's equivalence |
| is effective. The interface identified by a |
| particular value of this index is the same |
| interface as identified by the same value of |
| ifIndex." |
| ::= { ipNetToMediaEntry 1 } |
| |
| ipNetToMediaPhysAddress OBJECT-TYPE |
| SYNTAX PhysAddress |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The media-dependent `physical' address." |
| ::= { ipNetToMediaEntry 2 } |
| |
| ipNetToMediaNetAddress OBJECT-TYPE |
| SYNTAX IpAddress |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The IpAddress corresponding to the media- |
| dependent `physical' address." |
| ::= { ipNetToMediaEntry 3 } |
| |
| ipNetToMediaType OBJECT-TYPE |
| SYNTAX INTEGER { |
| other(1), -- none of the following |
| invalid(2), -- an invalidated mapping |
| dynamic(3), |
| static(4) |
| } |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The type of mapping. |
| |
| Setting this object to the value invalid(2) has |
| the effect of invalidating the corresponding entry |
| in the ipNetToMediaTable. That is, it effectively |
| dissasociates the interface identified with said |
| entry from the mapping identified with said entry. |
| It is an implementation-specific matter as to |
| whether the agent removes an invalidated entry |
| from the table. Accordingly, management stations |
| must be prepared to receive tabular information |
| from agents that corresponds to entries not |
| currently in use. Proper interpretation of such |
| entries requires examination of the relevant |
| ipNetToMediaType object." |
| ::= { ipNetToMediaEntry 4 } |
| |
| -- additional IP objects |
| |
| ipRoutingDiscards OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of routing entries which were chosen |
| to be discarded even though they are valid. One |
| possible reason for discarding such an entry could |
| be to free-up buffer space for other routing |
| |
| entries." |
| ::= { ip 23 } |
| |
| -- the ICMP group |
| |
| -- Implementation of the ICMP group is mandatory for all |
| -- systems. |
| |
| icmpInMsgs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of ICMP messages which the |
| entity received. Note that this counter includes |
| all those counted by icmpInErrors." |
| ::= { icmp 1 } |
| |
| icmpInErrors OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP messages which the entity |
| received but determined as having ICMP-specific |
| errors (bad ICMP checksums, bad length, etc.)." |
| ::= { icmp 2 } |
| |
| icmpInDestUnreachs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Destination Unreachable |
| messages received." |
| ::= { icmp 3 } |
| |
| icmpInTimeExcds OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Time Exceeded messages |
| received." |
| ::= { icmp 4 } |
| |
| icmpInParmProbs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Parameter Problem messages |
| received." |
| ::= { icmp 5 } |
| |
| icmpInSrcQuenchs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Source Quench messages |
| received." |
| ::= { icmp 6 } |
| |
| icmpInRedirects OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Redirect messages received." |
| ::= { icmp 7 } |
| |
| icmpInEchos OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Echo (request) messages |
| received." |
| ::= { icmp 8 } |
| |
| icmpInEchoReps OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Echo Reply messages received." |
| ::= { icmp 9 } |
| |
| icmpInTimestamps OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Timestamp (request) messages |
| received." |
| ::= { icmp 10 } |
| |
| icmpInTimestampReps OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Timestamp Reply messages |
| received." |
| ::= { icmp 11 } |
| |
| icmpInAddrMasks OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Address Mask Request messages |
| received." |
| ::= { icmp 12 } |
| |
| icmpInAddrMaskReps OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Address Mask Reply messages |
| received." |
| ::= { icmp 13 } |
| |
| icmpOutMsgs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of ICMP messages which this |
| entity attempted to send. Note that this counter |
| includes all those counted by icmpOutErrors." |
| ::= { icmp 14 } |
| |
| icmpOutErrors OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP messages which this entity did |
| not send due to problems discovered within ICMP |
| |
| such as a lack of buffers. This value should not |
| include errors discovered outside the ICMP layer |
| such as the inability of IP to route the resultant |
| datagram. In some implementations there may be no |
| types of error which contribute to this counter's |
| value." |
| ::= { icmp 15 } |
| |
| icmpOutDestUnreachs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Destination Unreachable |
| messages sent." |
| ::= { icmp 16 } |
| |
| icmpOutTimeExcds OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Time Exceeded messages sent." |
| ::= { icmp 17 } |
| |
| icmpOutParmProbs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Parameter Problem messages |
| sent." |
| ::= { icmp 18 } |
| |
| icmpOutSrcQuenchs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Source Quench messages sent." |
| ::= { icmp 19 } |
| |
| icmpOutRedirects OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Redirect messages sent. For a |
| |
| host, this object will always be zero, since hosts |
| do not send redirects." |
| ::= { icmp 20 } |
| |
| icmpOutEchos OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Echo (request) messages sent." |
| ::= { icmp 21 } |
| |
| icmpOutEchoReps OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Echo Reply messages sent." |
| ::= { icmp 22 } |
| |
| icmpOutTimestamps OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Timestamp (request) messages |
| sent." |
| ::= { icmp 23 } |
| |
| icmpOutTimestampReps OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Timestamp Reply messages |
| sent." |
| ::= { icmp 24 } |
| |
| icmpOutAddrMasks OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Address Mask Request messages |
| sent." |
| ::= { icmp 25 } |
| |
| icmpOutAddrMaskReps OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of ICMP Address Mask Reply messages |
| sent." |
| ::= { icmp 26 } |
| |
| -- the TCP group |
| |
| -- Implementation of the TCP group is mandatory for all |
| -- systems that implement the TCP. |
| |
| -- Note that instances of object types that represent |
| -- information about a particular TCP connection are |
| -- transient; they persist only as long as the connection |
| -- in question. |
| |
| tcpRtoAlgorithm OBJECT-TYPE |
| SYNTAX INTEGER { |
| other(1), -- none of the following |
| |
| constant(2), -- a constant rto |
| rsre(3), -- MIL-STD-1778, Appendix B |
| vanj(4) -- Van Jacobson's algorithm [10] |
| } |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The algorithm used to determine the timeout value |
| used for retransmitting unacknowledged octets." |
| ::= { tcp 1 } |
| |
| tcpRtoMin OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The minimum value permitted by a TCP |
| implementation for the retransmission timeout, |
| measured in milliseconds. More refined semantics |
| for objects of this type depend upon the algorithm |
| used to determine the retransmission timeout. In |
| particular, when the timeout algorithm is rsre(3), |
| an object of this type has the semantics of the |
| LBOUND quantity described in RFC 793." |
| ::= { tcp 2 } |
| |
| tcpRtoMax OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The maximum value permitted by a TCP |
| implementation for the retransmission timeout, |
| measured in milliseconds. More refined semantics |
| for objects of this type depend upon the algorithm |
| used to determine the retransmission timeout. In |
| particular, when the timeout algorithm is rsre(3), |
| an object of this type has the semantics of the |
| UBOUND quantity described in RFC 793." |
| ::= { tcp 3 } |
| |
| tcpMaxConn OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The limit on the total number of TCP connections |
| the entity can support. In entities where the |
| maximum number of connections is dynamic, this |
| object should contain the value -1." |
| ::= { tcp 4 } |
| |
| tcpActiveOpens OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of times TCP connections have made a |
| direct transition to the SYN-SENT state from the |
| CLOSED state." |
| ::= { tcp 5 } |
| |
| tcpPassiveOpens OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of times TCP connections have made a |
| direct transition to the SYN-RCVD state from the |
| LISTEN state." |
| ::= { tcp 6 } |
| |
| tcpAttemptFails OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of times TCP connections have made a |
| direct transition to the CLOSED state from either |
| the SYN-SENT state or the SYN-RCVD state, plus the |
| number of times TCP connections have made a direct |
| transition to the LISTEN state from the SYN-RCVD |
| state." |
| ::= { tcp 7 } |
| |
| tcpEstabResets OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of times TCP connections have made a |
| direct transition to the CLOSED state from either |
| the ESTABLISHED state or the CLOSE-WAIT state." |
| ::= { tcp 8 } |
| |
| tcpCurrEstab OBJECT-TYPE |
| SYNTAX Gauge |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of TCP connections for which the |
| current state is either ESTABLISHED or CLOSE- |
| WAIT." |
| ::= { tcp 9 } |
| |
| tcpInSegs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of segments received, including |
| those received in error. This count includes |
| segments received on currently established |
| connections." |
| ::= { tcp 10 } |
| |
| tcpOutSegs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of segments sent, including |
| those on current connections but excluding those |
| containing only retransmitted octets." |
| ::= { tcp 11 } |
| |
| tcpRetransSegs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of segments retransmitted - that |
| is, the number of TCP segments transmitted |
| containing one or more previously transmitted |
| octets." |
| ::= { tcp 12 } |
| |
| -- the TCP Connection table |
| |
| -- The TCP connection table contains information about this |
| -- entity's existing TCP connections. |
| |
| tcpConnTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF TcpConnEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "A table containing TCP connection-specific |
| information." |
| ::= { tcp 13 } |
| |
| tcpConnEntry OBJECT-TYPE |
| SYNTAX TcpConnEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "Information about a particular current TCP |
| connection. An object of this type is transient, |
| in that it ceases to exist when (or soon after) |
| the connection makes the transition to the CLOSED |
| state." |
| INDEX { tcpConnLocalAddress, |
| tcpConnLocalPort, |
| tcpConnRemAddress, |
| tcpConnRemPort } |
| ::= { tcpConnTable 1 } |
| |
| TcpConnEntry ::= |
| SEQUENCE { |
| tcpConnState |
| INTEGER, |
| tcpConnLocalAddress |
| IpAddress, |
| tcpConnLocalPort |
| INTEGER (0..65535), |
| tcpConnRemAddress |
| IpAddress, |
| tcpConnRemPort |
| INTEGER (0..65535) |
| } |
| |
| tcpConnState OBJECT-TYPE |
| SYNTAX INTEGER { |
| closed(1), |
| listen(2), |
| synSent(3), |
| synReceived(4), |
| established(5), |
| finWait1(6), |
| finWait2(7), |
| closeWait(8), |
| lastAck(9), |
| closing(10), |
| timeWait(11), |
| deleteTCB(12) |
| } |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "The state of this TCP connection. |
| |
| The only value which may be set by a management |
| station is deleteTCB(12). Accordingly, it is |
| appropriate for an agent to return a `badValue' |
| response if a management station attempts to set |
| this object to any other value. |
| |
| If a management station sets this object to the |
| value deleteTCB(12), then this has the effect of |
| deleting the TCB (as defined in RFC 793) of the |
| corresponding connection on the managed node, |
| resulting in immediate termination of the |
| connection. |
| |
| As an implementation-specific option, a RST |
| |
| segment may be sent from the managed node to the |
| other TCP endpoint (note however that RST segments |
| are not sent reliably)." |
| ::= { tcpConnEntry 1 } |
| |
| tcpConnLocalAddress OBJECT-TYPE |
| SYNTAX IpAddress |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The local IP address for this TCP connection. In |
| the case of a connection in the listen state which |
| is willing to accept connections for any IP |
| interface associated with the node, the value |
| 0.0.0.0 is used." |
| ::= { tcpConnEntry 2 } |
| |
| tcpConnLocalPort OBJECT-TYPE |
| SYNTAX INTEGER (0..65535) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The local port number for this TCP connection." |
| ::= { tcpConnEntry 3 } |
| |
| tcpConnRemAddress OBJECT-TYPE |
| SYNTAX IpAddress |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The remote IP address for this TCP connection." |
| ::= { tcpConnEntry 4 } |
| |
| tcpConnRemPort OBJECT-TYPE |
| SYNTAX INTEGER (0..65535) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The remote port number for this TCP connection." |
| ::= { tcpConnEntry 5 } |
| |
| -- additional TCP objects |
| |
| tcpInErrs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of segments received in error |
| (e.g., bad TCP checksums)." |
| ::= { tcp 14 } |
| |
| tcpOutRsts OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of TCP segments sent containing the |
| RST flag." |
| ::= { tcp 15 } |
| |
| -- the UDP group |
| |
| -- Implementation of the UDP group is mandatory for all |
| -- systems which implement the UDP. |
| |
| udpInDatagrams OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of UDP datagrams delivered to |
| UDP users." |
| ::= { udp 1 } |
| |
| udpNoPorts OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of received UDP datagrams for |
| which there was no application at the destination |
| port." |
| ::= { udp 2 } |
| |
| udpInErrors OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of received UDP datagrams that could |
| not be delivered for reasons other than the lack |
| of an application at the destination port." |
| ::= { udp 3 } |
| |
| udpOutDatagrams OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of UDP datagrams sent from this |
| entity." |
| ::= { udp 4 } |
| |
| -- the UDP Listener table |
| |
| -- The UDP listener table contains information about this |
| -- entity's UDP end-points on which a local application is |
| -- currently accepting datagrams. |
| |
| udpTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF UdpEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "A table containing UDP listener information." |
| ::= { udp 5 } |
| |
| udpEntry OBJECT-TYPE |
| SYNTAX UdpEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "Information about a particular current UDP |
| listener." |
| INDEX { udpLocalAddress, udpLocalPort } |
| ::= { udpTable 1 } |
| |
| UdpEntry ::= |
| SEQUENCE { |
| udpLocalAddress |
| IpAddress, |
| udpLocalPort |
| INTEGER (0..65535) |
| } |
| |
| udpLocalAddress OBJECT-TYPE |
| SYNTAX IpAddress |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The local IP address for this UDP listener. In |
| |
| the case of a UDP listener which is willing to |
| accept datagrams for any IP interface associated |
| with the node, the value 0.0.0.0 is used." |
| ::= { udpEntry 1 } |
| |
| udpLocalPort OBJECT-TYPE |
| SYNTAX INTEGER (0..65535) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The local port number for this UDP listener." |
| ::= { udpEntry 2 } |
| |
| -- the EGP group |
| |
| -- Implementation of the EGP group is mandatory for all |
| -- systems which implement the EGP. |
| |
| egpInMsgs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of EGP messages received without |
| error." |
| ::= { egp 1 } |
| |
| egpInErrors OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of EGP messages received that proved |
| to be in error." |
| ::= { egp 2 } |
| |
| egpOutMsgs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of locally generated EGP |
| messages." |
| ::= { egp 3 } |
| |
| egpOutErrors OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of locally generated EGP messages not |
| sent due to resource limitations within an EGP |
| entity." |
| ::= { egp 4 } |
| |
| -- the EGP Neighbor table |
| |
| -- The EGP neighbor table contains information about this |
| -- entity's EGP neighbors. |
| |
| egpNeighTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF EgpNeighEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "The EGP neighbor table." |
| ::= { egp 5 } |
| |
| egpNeighEntry OBJECT-TYPE |
| SYNTAX EgpNeighEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "Information about this entity's relationship with |
| a particular EGP neighbor." |
| INDEX { egpNeighAddr } |
| ::= { egpNeighTable 1 } |
| |
| EgpNeighEntry ::= |
| SEQUENCE { |
| egpNeighState |
| INTEGER, |
| egpNeighAddr |
| IpAddress, |
| egpNeighAs |
| INTEGER, |
| egpNeighInMsgs |
| Counter, |
| egpNeighInErrs |
| Counter, |
| egpNeighOutMsgs |
| Counter, |
| egpNeighOutErrs |
| Counter, |
| egpNeighInErrMsgs |
| Counter, |
| egpNeighOutErrMsgs |
| Counter, |
| egpNeighStateUps |
| Counter, |
| egpNeighStateDowns |
| Counter, |
| egpNeighIntervalHello |
| INTEGER, |
| egpNeighIntervalPoll |
| INTEGER, |
| egpNeighMode |
| INTEGER, |
| egpNeighEventTrigger |
| INTEGER |
| } |
| |
| egpNeighState OBJECT-TYPE |
| SYNTAX INTEGER { |
| idle(1), |
| acquisition(2), |
| down(3), |
| up(4), |
| cease(5) |
| } |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The EGP state of the local system with respect to |
| this entry's EGP neighbor. Each EGP state is |
| represented by a value that is one greater than |
| the numerical value associated with said state in |
| RFC 904." |
| ::= { egpNeighEntry 1 } |
| |
| egpNeighAddr OBJECT-TYPE |
| SYNTAX IpAddress |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The IP address of this entry's EGP neighbor." |
| ::= { egpNeighEntry 2 } |
| |
| egpNeighAs OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The autonomous system of this EGP peer. Zero |
| should be specified if the autonomous system |
| number of the neighbor is not yet known." |
| ::= { egpNeighEntry 3 } |
| |
| egpNeighInMsgs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of EGP messages received without error |
| from this EGP peer." |
| ::= { egpNeighEntry 4 } |
| |
| egpNeighInErrs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of EGP messages received from this EGP |
| peer that proved to be in error (e.g., bad EGP |
| checksum)." |
| ::= { egpNeighEntry 5 } |
| |
| egpNeighOutMsgs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of locally generated EGP messages to |
| this EGP peer." |
| ::= { egpNeighEntry 6 } |
| |
| egpNeighOutErrs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of locally generated EGP messages not |
| sent to this EGP peer due to resource limitations |
| within an EGP entity." |
| ::= { egpNeighEntry 7 } |
| |
| egpNeighInErrMsgs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of EGP-defined error messages received |
| from this EGP peer." |
| ::= { egpNeighEntry 8 } |
| |
| egpNeighOutErrMsgs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of EGP-defined error messages sent to |
| this EGP peer." |
| ::= { egpNeighEntry 9 } |
| |
| egpNeighStateUps OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of EGP state transitions to the UP |
| state with this EGP peer." |
| ::= { egpNeighEntry 10 } |
| |
| egpNeighStateDowns OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of EGP state transitions from the UP |
| state to any other state with this EGP peer." |
| ::= { egpNeighEntry 11 } |
| |
| egpNeighIntervalHello OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The interval between EGP Hello command |
| retransmissions (in hundredths of a second). This |
| represents the t1 timer as defined in RFC 904." |
| ::= { egpNeighEntry 12 } |
| |
| egpNeighIntervalPoll OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The interval between EGP poll command |
| |
| retransmissions (in hundredths of a second). This |
| represents the t3 timer as defined in RFC 904." |
| ::= { egpNeighEntry 13 } |
| |
| egpNeighMode OBJECT-TYPE |
| SYNTAX INTEGER { active(1), passive(2) } |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The polling mode of this EGP entity, either |
| passive or active." |
| ::= { egpNeighEntry 14 } |
| |
| egpNeighEventTrigger OBJECT-TYPE |
| SYNTAX INTEGER { start(1), stop(2) } |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "A control variable used to trigger operator- |
| initiated Start and Stop events. When read, this |
| variable always returns the most recent value that |
| egpNeighEventTrigger was set to. If it has not |
| been set since the last initialization of the |
| network management subsystem on the node, it |
| returns a value of `stop'. |
| |
| When set, this variable causes a Start or Stop |
| event on the specified neighbor, as specified on |
| pages 8-10 of RFC 904. Briefly, a Start event |
| causes an Idle peer to begin neighbor acquisition |
| and a non-Idle peer to reinitiate neighbor |
| acquisition. A stop event causes a non-Idle peer |
| to return to the Idle state until a Start event |
| occurs, either via egpNeighEventTrigger or |
| otherwise." |
| ::= { egpNeighEntry 15 } |
| |
| -- additional EGP objects |
| |
| egpAs OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The autonomous system number of this EGP entity." |
| ::= { egp 6 } |
| |
| -- the Transmission group |
| |
| -- Based on the transmission media underlying each interface |
| -- on a system, the corresponding portion of the Transmission |
| -- group is mandatory for that system. |
| |
| -- When Internet-standard definitions for managing |
| -- transmission media are defined, the transmission group is |
| -- used to provide a prefix for the names of those objects. |
| |
| -- Typically, such definitions reside in the experimental |
| -- portion of the MIB until they are "proven", then as a |
| -- part of the Internet standardization process, the |
| -- definitions are accordingly elevated and a new object |
| -- identifier, under the transmission group is defined. By |
| -- convention, the name assigned is: |
| -- |
| -- type OBJECT IDENTIFIER ::= { transmission number } |
| -- |
| -- where "type" is the symbolic value used for the media in |
| -- the ifType column of the ifTable object, and "number" is |
| -- the actual integer value corresponding to the symbol. |
| |
| -- the SNMP group |
| |
| -- Implementation of the SNMP group is mandatory for all |
| -- systems which support an SNMP protocol entity. Some of |
| -- the objects defined below will be zero-valued in those |
| -- SNMP implementations that are optimized to support only |
| -- those functions specific to either a management agent or |
| -- a management station. In particular, it should be |
| -- observed that the objects below refer to an SNMP entity, |
| -- and there may be several SNMP entities residing on a |
| -- managed node (e.g., if the node is hosting acting as |
| -- a management station). |
| |
| snmpInPkts OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of Messages delivered to the |
| SNMP entity from the transport service." |
| ::= { snmp 1 } |
| |
| snmpOutPkts OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Messages which were |
| passed from the SNMP protocol entity to the |
| transport service." |
| ::= { snmp 2 } |
| |
| snmpInBadVersions OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Messages which were |
| delivered to the SNMP protocol entity and were for |
| an unsupported SNMP version." |
| ::= { snmp 3 } |
| |
| snmpInBadCommunityNames OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Messages delivered to |
| the SNMP protocol entity which used a SNMP |
| community name not known to said entity." |
| ::= { snmp 4 } |
| |
| snmpInBadCommunityUses OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Messages delivered to |
| the SNMP protocol entity which represented an SNMP |
| operation which was not allowed by the SNMP |
| community named in the Message." |
| ::= { snmp 5 } |
| |
| snmpInASNParseErrs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of ASN.1 or BER errors |
| encountered by the SNMP protocol entity when |
| decoding received SNMP Messages." |
| ::= { snmp 6 } |
| |
| -- { snmp 7 } is not used |
| |
| snmpInTooBigs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP PDUs which were |
| delivered to the SNMP protocol entity and for |
| which the value of the error-status field is |
| `tooBig'." |
| ::= { snmp 8 } |
| |
| snmpInNoSuchNames OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP PDUs which were |
| delivered to the SNMP protocol entity and for |
| which the value of the error-status field is |
| `noSuchName'." |
| ::= { snmp 9 } |
| |
| snmpInBadValues OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP PDUs which were |
| delivered to the SNMP protocol entity and for |
| which the value of the error-status field is |
| `badValue'." |
| ::= { snmp 10 } |
| |
| snmpInReadOnlys OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number valid SNMP PDUs which were |
| delivered to the SNMP protocol entity and for |
| which the value of the error-status field is |
| `readOnly'. It should be noted that it is a |
| protocol error to generate an SNMP PDU which |
| contains the value `readOnly' in the error-status |
| field, as such this object is provided as a means |
| of detecting incorrect implementations of the |
| |
| SNMP." |
| ::= { snmp 11 } |
| |
| snmpInGenErrs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP PDUs which were |
| delivered to the SNMP protocol entity and for |
| which the value of the error-status field is |
| `genErr'." |
| ::= { snmp 12 } |
| |
| snmpInTotalReqVars OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of MIB objects which have been |
| retrieved successfully by the SNMP protocol entity |
| as the result of receiving valid SNMP Get-Request |
| and Get-Next PDUs." |
| ::= { snmp 13 } |
| |
| snmpInTotalSetVars OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of MIB objects which have been |
| altered successfully by the SNMP protocol entity |
| as the result of receiving valid SNMP Set-Request |
| PDUs." |
| ::= { snmp 14 } |
| |
| snmpInGetRequests OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Get-Request PDUs which |
| have been accepted and processed by the SNMP |
| protocol entity." |
| ::= { snmp 15 } |
| |
| snmpInGetNexts OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Get-Next PDUs which have |
| been accepted and processed by the SNMP protocol |
| entity." |
| ::= { snmp 16 } |
| |
| snmpInSetRequests OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Set-Request PDUs which |
| have been accepted and processed by the SNMP |
| protocol entity." |
| ::= { snmp 17 } |
| |
| snmpInGetResponses OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Get-Response PDUs which |
| have been accepted and processed by the SNMP |
| protocol entity." |
| ::= { snmp 18 } |
| |
| snmpInTraps OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Trap PDUs which have |
| been accepted and processed by the SNMP protocol |
| entity." |
| ::= { snmp 19 } |
| |
| snmpOutTooBigs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP PDUs which were |
| generated by the SNMP protocol entity and for |
| which the value of the error-status field is |
| `tooBig.'" |
| ::= { snmp 20 } |
| |
| snmpOutNoSuchNames OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP PDUs which were |
| generated by the SNMP protocol entity and for |
| which the value of the error-status is |
| `noSuchName'." |
| ::= { snmp 21 } |
| |
| snmpOutBadValues OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP PDUs which were |
| generated by the SNMP protocol entity and for |
| which the value of the error-status field is |
| `badValue'." |
| ::= { snmp 22 } |
| |
| -- { snmp 23 } is not used |
| |
| snmpOutGenErrs OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP PDUs which were |
| generated by the SNMP protocol entity and for |
| which the value of the error-status field is |
| `genErr'." |
| ::= { snmp 24 } |
| |
| snmpOutGetRequests OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Get-Request PDUs which |
| have been generated by the SNMP protocol entity." |
| ::= { snmp 25 } |
| |
| snmpOutGetNexts OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Get-Next PDUs which have |
| been generated by the SNMP protocol entity." |
| ::= { snmp 26 } |
| |
| snmpOutSetRequests OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Set-Request PDUs which |
| have been generated by the SNMP protocol entity." |
| ::= { snmp 27 } |
| |
| snmpOutGetResponses OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Get-Response PDUs which |
| have been generated by the SNMP protocol entity." |
| ::= { snmp 28 } |
| |
| snmpOutTraps OBJECT-TYPE |
| SYNTAX Counter |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The total number of SNMP Trap PDUs which have |
| been generated by the SNMP protocol entity." |
| ::= { snmp 29 } |
| |
| snmpEnableAuthenTraps OBJECT-TYPE |
| SYNTAX INTEGER { enabled(1), disabled(2) } |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "Indicates whether the SNMP agent process is |
| permitted to generate authentication-failure |
| traps. The value of this object overrides any |
| configuration information; as such, it provides a |
| means whereby all authentication-failure traps may |
| be disabled. |
| |
| Note that it is strongly recommended that this |
| object be stored in non-volatile memory so that it |
| remains constant between re-initializations of the |
| network management system." |
| ::= { snmp 30 } |
| |
| END |
