| SNMPv2-M2M-MIB DEFINITIONS ::= BEGIN |
| |
| IMPORTS |
| MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, |
| Integer32, Counter32, snmpModules |
| FROM SNMPv2-SMI |
| DisplayString, InstancePointer, RowStatus, TimeStamp |
| FROM SNMPv2-TC |
| MODULE-COMPLIANCE, OBJECT-GROUP |
| FROM SNMPv2-CONF |
| contextIdentity |
| FROM SNMPv2-PARTY-MIB; |
| |
| snmpM2M MODULE-IDENTITY |
| LAST-UPDATED "9304010000Z" |
| ORGANIZATION "IETF SNMPv2 Working Group" |
| CONTACT-INFO |
| " Steven Waldbusser |
| |
| Postal: Carnegie Mellon University |
| 4910 Forbes Ave |
| Pittsburgh, PA 15213 |
| |
| Tel: +1 412 268 6628 |
| Fax: +1 412 268 4987 |
| |
| E-mail: waldbusser@cmu.edu" |
| DESCRIPTION |
| "The Manager-to-Manager MIB module." |
| ::= { snmpModules 2 } |
| |
| snmpM2MObjects OBJECT IDENTIFIER ::= { snmpM2M 1 } |
| |
| |
| -- the alarm group |
| -- |
| -- a collection of objects allowing the description and |
| -- configuration of threshold alarms from a SNMPv2 entity |
| -- acting in a dual role. |
| |
| snmpAlarm OBJECT IDENTIFIER ::= { snmpM2MObjects 1 } |
| |
| -- This Alarm mechanism periodically takes statistical samples |
| -- from variables available via SNMPv2 and compares them to |
| -- thresholds that have been configured. The alarm table |
| -- stores configuration entries that each define a variable, |
| -- polling period, and threshold parameters. If a sample is |
| -- found to cross the threshold values, an event is generated. |
| -- Only variables that resolve to an ASN.1 primitive type of |
| -- INTEGER (Integer32, Counter32, Gauge32, TimeTicks, |
| -- Counter64, or UInteger32) may be monitored in this way. |
| -- |
| -- This function has a hysteresis mechanism to limit the |
| -- generation of events. This mechanism generates one event |
| -- as a threshold is crossed in the appropriate direction. No |
| -- more events are generated for that threshold until the |
| -- opposite threshold is crossed. |
| -- |
| -- In the case of sampling a deltaValue, an entity may |
| -- implement this mechanism with more precision if it takes a |
| -- delta sample twice per period, each time comparing the sum |
| -- of the latest two samples to the threshold. This allows |
| -- the detection of threshold crossings that span the sampling |
| -- boundary. Note that this does not require any special |
| -- configuration of the threshold value. It is suggested that |
| -- entities implement this more precise algorithm. |
| -- |
| |
| |
| snmpAlarmNextIndex OBJECT-TYPE |
| SYNTAX INTEGER (0..65535) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The index number of the next appropriate |
| unassigned entry in the snmpAlarmTable. The value |
| 0 indicates that no unassigned entries are |
| available. |
| |
| A management station should create new entries in |
| the snmpAlarmTable using this algorithm: first, |
| issue a management protocol retrieval operation to |
| determine the value of snmpAlarmNextIndex; and, |
| second, issue a management protocol set operation |
| to create an instance of the snmpAlarmStatus |
| object setting its value to `createAndGo' or |
| `createAndWait' (as specified in the description |
| of the RowStatus textual convention)." |
| ::= { snmpAlarm 1 } |
| |
| snmpAlarmTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SnmpAlarmEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "A list of snmpAlarm entries." |
| ::= { snmpAlarm 2 } |
| |
| snmpAlarmEntry OBJECT-TYPE |
| SYNTAX SnmpAlarmEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "A list of parameters that set up a periodic |
| sampling query to check for alarm conditions. The |
| contextIdentity included in the INDEX clause is |
| the context to which the sampling queries are |
| directed." |
| INDEX { contextIdentity, snmpAlarmIndex } |
| ::= { snmpAlarmTable 1 } |
| |
| |
| SnmpAlarmEntry ::= SEQUENCE { |
| snmpAlarmIndex INTEGER, |
| snmpAlarmVariable InstancePointer, |
| snmpAlarmInterval Integer32, |
| snmpAlarmSampleType INTEGER, |
| snmpAlarmValue Integer32, |
| snmpAlarmStartupAlarm INTEGER, |
| snmpAlarmRisingThreshold Integer32, |
| snmpAlarmFallingThreshold Integer32, |
| snmpAlarmRisingEventIndex INTEGER, |
| snmpAlarmFallingEventIndex INTEGER, |
| snmpAlarmUnavailableEventIndex INTEGER, |
| snmpAlarmStatus RowStatus |
| } |
| |
| snmpAlarmIndex OBJECT-TYPE |
| SYNTAX INTEGER (1..65535) |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "An index that uniquely identifies an entry in the |
| snmpAlarm table for a particular sampling context. |
| Each such entry defines a diagnostic sample at a |
| particular interval for a variable in the |
| particular context's object resources." |
| ::= { snmpAlarmEntry 1 } |
| |
| |
| snmpAlarmVariable OBJECT-TYPE |
| SYNTAX InstancePointer |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The object identifier of the particular variable |
| to be sampled. Only variables that resolve to an |
| ASN.1 primitive type of INTEGER (Integer32, |
| Counter32, Gauge32, TimeTicks, Counter64, or |
| UInteger32) may be sampled. |
| |
| If it is detected by an error response of |
| authorizationError, noSuchObject, or |
| noSuchInstance that the variable name of an |
| established snmpAlarmEntry is no longer available |
| in the sampling context, a single |
| snmpObjectUnavailableAlarm event is generated and |
| the status of this snmpAlarmEntry is set to |
| `destroy'. Likewise, if the syntax of the |
| variable retrieved by the query is not Integer32, |
| Counter32, Gauge32, TimeTicks, Counter64, or |
| UInteger32, the same actions will be taken. |
| |
| If the SNMPv2 entity acting in a dual role detects |
| that the sampled value can not be obtained due to |
| lack of response to management queries, it should |
| either: |
| |
| 1) Set the status of this snmpAlarmEntry to |
| `destroy', if it is determined that further |
| communication is not possible; |
| |
| or, |
| |
| 2) Delete the associated snmpAlarmValue |
| instance (but not the entire conceptual row), |
| and continue to attempt to sample the |
| variable and recreate the associated |
| snmpAlarmValue instance should communication |
| be reestablished. |
| |
| An attempt to modify this object will fail with an |
| `inconsistentValue' error if the associated |
| snmpAlarmStatus object would be equal to `active' |
| both before and after the modification attempt." |
| |
| |
| ::= { snmpAlarmEntry 2 } |
| |
| snmpAlarmInterval OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "seconds" |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The interval in seconds over which the data is |
| sampled and compared with the rising and falling |
| thresholds. When setting this object and the |
| sampling type is `deltaValue', care should be |
| taken to ensure that the change during this |
| interval of the variable being sampled will not |
| exceed the (-2^31...2^31-1) range of the |
| snmpAlarmValue. |
| |
| An attempt to modify this object will fail with an |
| `inconsistentValue' error if the associated |
| snmpAlarmStatus object would be equal to `active' |
| both before and after the modification attempt." |
| ::= { snmpAlarmEntry 3 } |
| |
| |
| snmpAlarmSampleType OBJECT-TYPE |
| SYNTAX INTEGER { |
| absoluteValue(1), |
| deltaValue(2) |
| } |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The method of sampling the selected variable and |
| calculating the value to be compared against the |
| thresholds. If the value of this object is |
| `absoluteValue', the value of the selected |
| variable at the end of the sampling interval will |
| be compared directly with both the |
| snmpAlarmRisingThreshold and the |
| snmpAlarmFallingThreshold values. If the value of |
| this object is `deltaValue', the value of the |
| selected variable at the end of the sampling |
| interval will be subtracted from its value at the |
| end of the previous sampling interval, and the |
| difference compared with both the |
| snmpAlarmRisingThreshold and the |
| snmpAlarmFallingThreshold values. |
| |
| An attempt to modify this object will fail with an |
| `inconsistentValue' error if the associated |
| snmpAlarmStatus object would be equal to `active' |
| both before and after the modification attempt." |
| DEFVAL { deltaValue } |
| ::= { snmpAlarmEntry 4 } |
| |
| |
| snmpAlarmValue OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of the statistic during the last |
| sampling period. The value during the current |
| sampling period is not made available until the |
| period is completed. If the value of the |
| statistic does not fit in the signed 32 bit |
| representation of this object, it should be |
| truncated in an implementation specific manner. |
| |
| Note that if the associated snmpAlarmSampleType is |
| set to `deltaValue', the value of this object is |
| the difference in the sampled variable since the |
| last sample. |
| |
| This object will be created by the SNMPv2 entity |
| acting in a dual role when this entry is set to |
| `active', and the first sampling period has |
| completed. It may be created and deleted at other |
| times by the SNMPv2 entity acting in a dual role |
| when the sampled value can not be obtained, as |
| specified in the snmpAlarmVariable object." |
| ::= { snmpAlarmEntry 5 } |
| |
| |
| snmpAlarmStartupAlarm OBJECT-TYPE |
| SYNTAX INTEGER { |
| risingAlarm(1), |
| fallingAlarm(2), |
| risingOrFallingAlarm(3) |
| } |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The alarm that may be sent when this entry is |
| first set to `active'. If the first sample after |
| this entry becomes active is greater than or equal |
| to the risingThreshold and snmpAlarmStartupAlarm |
| is equal to `risingAlarm' or |
| `risingOrFallingAlarm', then a single rising alarm |
| will be generated. If the first sample after this |
| entry becomes active is less than or equal to the |
| fallingThreshold and snmpAlarmStartupAlarm is |
| equal to `fallingAlarm' or `risingOrFallingAlarm', |
| then a single falling alarm will be generated. |
| Note that a snmpObjectUnavailableAlarm is sent |
| upon startup whenever it is applicable, |
| independent of the setting of |
| snmpAlarmStartupAlarm. |
| |
| An attempt to modify this object will fail with an |
| `inconsistentValue' error if the associated |
| snmpAlarmStatus object would be equal to `active' |
| both before and after the modification attempt." |
| DEFVAL { risingOrFallingAlarm } |
| ::= { snmpAlarmEntry 6 } |
| |
| |
| snmpAlarmRisingThreshold OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "A threshold for the sampled statistic. When the |
| current sampled value is greater than or equal to |
| this threshold, and the value at the last sampling |
| interval was less than this threshold, a single |
| event will be generated. A single event will also |
| be generated if the first sample after this entry |
| becomes active is greater than or equal to this |
| threshold and the associated snmpAlarmStartupAlarm |
| is equal to `risingAlarm' or |
| `risingOrFallingAlarm'. |
| |
| After a rising event is generated, another such |
| event will not be generated until the sampled |
| value falls below this threshold and reaches the |
| snmpAlarmFallingThreshold. |
| |
| An attempt to modify this object will fail with an |
| `inconsistentValue' error if the associated |
| snmpAlarmStatus object would be equal to `active' |
| both before and after the modification attempt." |
| ::= { snmpAlarmEntry 7 } |
| |
| |
| snmpAlarmFallingThreshold OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "A threshold for the sampled statistic. When the |
| current sampled value is less than or equal to |
| this threshold, and the value at the last sampling |
| interval was greater than this threshold, a single |
| event will be generated. A single event will also |
| be generated if the first sample after this entry |
| becomes active is less than or equal to this |
| threshold and the associated snmpAlarmStartupAlarm |
| is equal to `fallingAlarm' or |
| `risingOrFallingAlarm'. |
| |
| After a falling event is generated, another such |
| event will not be generated until the sampled |
| value rises above this threshold and reaches the |
| snmpAlarmRisingThreshold. |
| |
| An attempt to modify this object will fail with an |
| `inconsistentValue' error if the associated |
| snmpAlarmStatus object would be equal to `active' |
| both before and after the modification attempt." |
| ::= { snmpAlarmEntry 8 } |
| |
| |
| snmpAlarmRisingEventIndex OBJECT-TYPE |
| SYNTAX INTEGER (0..65535) |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The index of the snmpEventEntry that is used when |
| a rising threshold is crossed. The snmpEventEntry |
| identified by a particular value of this index is |
| the same as identified by the same value of the |
| snmpEventIndex object. If there is no |
| corresponding entry in the snmpEventTable, then no |
| association exists. In particular, if this value |
| is zero, no associated event will be generated, as |
| zero is not a valid snmpEventIndex. |
| |
| An attempt to modify this object will fail with an |
| `inconsistentValue' error if the associated |
| snmpAlarmStatus object would be equal to `active' |
| both before and after the modification attempt." |
| ::= { snmpAlarmEntry 9 } |
| |
| |
| snmpAlarmFallingEventIndex OBJECT-TYPE |
| SYNTAX INTEGER (0..65535) |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The index of the snmpEventEntry that is used when |
| a falling threshold is crossed. The |
| snmpEventEntry identified by a particular value of |
| this index is the same as identified by the same |
| value of the snmpEventIndex object. If there is |
| no corresponding entry in the snmpEventTable, then |
| no association exists. In particular, if this |
| value is zero, no associated event will be |
| generated, as zero is not a valid snmpEventIndex. |
| |
| An attempt to modify this object will fail with an |
| `inconsistentValue' error if the associated |
| snmpAlarmStatus object would be equal to `active' |
| both before and after the modification attempt." |
| ::= { snmpAlarmEntry 10 } |
| |
| snmpAlarmUnavailableEventIndex OBJECT-TYPE |
| SYNTAX INTEGER (0..65535) |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The index of the snmpEventEntry that is used when |
| a variable becomes unavailable. The |
| snmpEventEntry identified by a particular value of |
| this index is the same as identified by the same |
| value of the snmpEventIndex object. If there is |
| no corresponding entry in the snmpEventTable, then |
| no association exists. In particular, if this |
| value is zero, no associated event will be |
| generated, as zero is not a valid snmpEventIndex. |
| |
| An attempt to modify this object will fail with an |
| `inconsistentValue' error if the associated |
| snmpAlarmStatus object would be equal to `active' |
| both before and after the modification attempt." |
| ::= { snmpAlarmEntry 11 } |
| |
| |
| snmpAlarmStatus OBJECT-TYPE |
| SYNTAX RowStatus |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The status of this snmpAlarm entry. This object |
| may not be set to `active' unless the following |
| columnar objects exist in this row: |
| snmpAlarmVariable, snmpAlarmInterval, |
| snmpAlarmSampleType, snmpAlarmStartupAlarm, |
| snmpAlarmRisingThreshold, |
| snmpAlarmFallingThreshold, |
| snmpAlarmRisingEventIndex, |
| snmpAlarmFallingEventIndex, and |
| snmpAlarmUnavailableEventIndex." |
| ::= { snmpAlarmEntry 12 } |
| |
| |
| -- alarm-related notifications |
| |
| snmpAlarmNotifications |
| OBJECT IDENTIFIER ::= { snmpAlarm 3 } |
| |
| snmpRisingAlarm NOTIFICATION-TYPE |
| OBJECTS { snmpAlarmVariable, snmpAlarmSampleType, |
| snmpAlarmValue, snmpAlarmRisingThreshold } |
| STATUS current |
| DESCRIPTION |
| "An event that is generated when an alarm entry |
| crosses its rising threshold. The instances of |
| those objects contained within the varbind list |
| are those of the alarm entry which generated this |
| event." |
| ::= { snmpAlarmNotifications 1 } |
| |
| snmpFallingAlarm NOTIFICATION-TYPE |
| OBJECTS { snmpAlarmVariable, snmpAlarmSampleType, |
| snmpAlarmValue, snmpAlarmFallingThreshold } |
| STATUS current |
| DESCRIPTION |
| "An event that is generated when an alarm entry |
| crosses its falling threshold. The instances of |
| those objects contained within the varbind list |
| are those of the alarm entry which generated this |
| event." |
| ::= { snmpAlarmNotifications 2 } |
| |
| snmpObjectUnavailableAlarm NOTIFICATION-TYPE |
| OBJECTS { snmpAlarmVariable } |
| STATUS current |
| DESCRIPTION |
| "An event that is generated when a variable |
| monitored by an alarm entry becomes unavailable. |
| The instance of snmpAlarmVariable contained within |
| the varbind list is the one associated with the |
| alarm entry which generated this event." |
| ::= { snmpAlarmNotifications 3 } |
| |
| |
| -- the event group |
| -- |
| -- a collection of objects allowing the description and |
| -- configuration of events from a SNMPv2 entity acting |
| -- in a dual role. |
| |
| snmpEvent OBJECT IDENTIFIER ::= { snmpM2MObjects 2 } |
| |
| -- The snmpEvent table defines the set of events generated on |
| -- a SNMPv2 entity acting in a dual role. Each entry in the |
| -- snmpEventTable associates an event type with the |
| -- notification method and associated parameters. Some |
| -- snmpEvent entries are fired by an associated condition in |
| -- the snmpAlarmTable. Others are fired on behalf of |
| -- conditions defined in the NOTIFICATION-TYPE macro. The |
| -- snmpNotificationTable defines notifications that should |
| -- occur when an associated event is fired. |
| |
| snmpEventNextIndex OBJECT-TYPE |
| SYNTAX INTEGER (0..65535) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The index number of the next appropriate |
| unassigned entry in the snmpEventTable. The value |
| 0 indicates that no unassigned entries are |
| available. |
| |
| A management station should create new entries in |
| the snmpEventTable using this algorithm: first, |
| issue a management protocol retrieval operation to |
| determine the value of snmpEventNextIndex; and, |
| second, issue a management protocol set operation |
| to create an instance of the snmpEventStatus |
| object setting its value to `createAndWait' or |
| 'createAndGo'." |
| ::= { snmpEvent 1 } |
| |
| |
| snmpEventTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SnmpEventEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "A list of events." |
| ::= { snmpEvent 2 } |
| |
| snmpEventEntry OBJECT-TYPE |
| SYNTAX SnmpEventEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "A set of parameters that describe an event that |
| is generated when certain conditions are met." |
| INDEX { snmpEventIndex } |
| ::= { snmpEventTable 1 } |
| |
| SnmpEventEntry ::= SEQUENCE { |
| snmpEventIndex INTEGER, |
| snmpEventID OBJECT IDENTIFIER, |
| snmpEventDescription DisplayString, |
| snmpEventEvents Counter32, |
| snmpEventLastTimeSent TimeStamp, |
| snmpEventStatus RowStatus |
| } |
| |
| snmpEventIndex OBJECT-TYPE |
| SYNTAX INTEGER (1..65535) |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "An index that uniquely identifies an entry in the |
| snmpEvent table. Each such entry defines an event |
| generated when the appropriate conditions occur." |
| ::= { snmpEventEntry 1 } |
| |
| |
| snmpEventID OBJECT-TYPE |
| SYNTAX OBJECT IDENTIFIER |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The authoritative identification of the event |
| type generated by this entry. This variable |
| occurs as the second varbind of an InformRequest- |
| PDU. If this OBJECT IDENTIFIER maps to a |
| NOTIFICATION-TYPE the sender will place the |
| objects listed in the NOTIFICATION-TYPE in the |
| varbind list." |
| ::= { snmpEventEntry 2 } |
| |
| snmpEventDescription OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..127)) |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "A comment describing this snmpEvent entry." |
| ::= { snmpEventEntry 3 } |
| |
| snmpEventEvents OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of events caused by event generators |
| associated with this snmpEvent entry." |
| ::= { snmpEventEntry 4 } |
| |
| |
| snmpEventLastTimeSent OBJECT-TYPE |
| SYNTAX TimeStamp |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of sysUpTime at the time this snmpEvent |
| entry last generated an event. If this entry has |
| not generated any events, this value will be |
| zero." |
| DEFVAL { 0 } |
| ::= { snmpEventEntry 5 } |
| |
| snmpEventStatus OBJECT-TYPE |
| SYNTAX RowStatus |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The status of this snmpEvent entry. This object |
| may not be set to `active' unless the following |
| columnar objects exist in this row: snmpEventID, |
| snmpEventDescription, snmpEventEvents, and |
| snmpEventLastTimeSent. |
| |
| Setting an instance of this object to the value |
| 'destroy' has the effect of invalidating any/all |
| entries in the snmpEventTable, and the |
| snmpEventNotifyTable which reference the |
| corresponding snmpEventEntry." |
| ::= { snmpEventEntry 6 } |
| |
| |
| snmpEventNotifyMinInterval OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "seconds" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The minimum interval that the SNMPv2 entity |
| acting in a dual role will wait before |
| retransmitting an InformRequest-PDU. This object |
| specifies the minimal value supported by the |
| SNMPv2 entity acting in a dual role, based on |
| resource or implementation constraints. |
| |
| For a particular entry in the |
| snmpEventNotifyTable, if the associated |
| snmpEventNotifyIntervalRequested variable is |
| greater than this object, the |
| snmpEventNotifyIntervalRequested value shall be |
| used as the minimum interval for retransmissions |
| of InformRequest-PDUs sent on behalf of that |
| entry." |
| ::= { snmpEvent 3 } |
| |
| snmpEventNotifyMaxRetransmissions OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The maximum number of time that the SNMPv2 entity |
| acting in a dual role will retransmit an |
| InformRequest-PDU. This object specifies the |
| maximal value supported by the SNMPv2 entity |
| acting in a dual role, based on resource or |
| implementation constraints. |
| |
| For a particular entry in the |
| snmpEventNotifyTable, if the associated |
| snmpEventNotifyRetransmissionsRequested variable |
| is less than this object, the |
| snmpEventNotifyRetransmissionsRequested value |
| shall be used as the retransmission count for |
| InformRequest-PDUs sent on behalf of that entry." |
| ::= { snmpEvent 4 } |
| |
| -- The snmpEventNotifyTable is used to configure the |
| |
| |
| -- destination and type of notifications sent by a SNMPv2 |
| -- entity acting in a manager role when a particular event |
| -- is triggered. |
| |
| snmpEventNotifyTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SnmpEventNotifyEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "A list of protocol configuration entries for |
| event notifications from this entity." |
| ::= { snmpEvent 5 } |
| |
| snmpEventNotifyEntry OBJECT-TYPE |
| SYNTAX SnmpEventNotifyEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "A set of parameters that describe the type and |
| destination of InformRequest-PDUs sent for a |
| particular event. The snmpEventIndex in this |
| entry's INDEX clause identifies the snmpEventEntry |
| which, when triggered, will generate a |
| notification as configured in this entry. The |
| contextIdentity in this entry's INDEX clause |
| identifies the context to which a notification |
| will be sent." |
| INDEX { snmpEventIndex, contextIdentity } |
| ::= { snmpEventNotifyTable 1 } |
| |
| SnmpEventNotifyEntry ::= SEQUENCE { |
| snmpEventNotifyIntervalRequested Integer32, |
| snmpEventNotifyRetransmissionsRequested Integer32, |
| snmpEventNotifyLifetime Integer32, |
| snmpEventNotifyStatus RowStatus |
| } |
| |
| |
| snmpEventNotifyIntervalRequested OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "seconds" |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The requested interval for retransmission of |
| Inform PDUs generated on the behalf of this entry. |
| |
| This variable will be the actual interval used |
| unless the snmpEventNotifyMinInterval is greater |
| than this object, in which case the interval shall |
| be equal to snmpEventNotifyMinInterval." |
| DEFVAL { 30 } |
| ::= { snmpEventNotifyEntry 1 } |
| |
| snmpEventNotifyRetransmissionsRequested OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The requested number of retransmissions of an |
| InformRequest-PDU generated on behalf of this |
| entry. |
| |
| This variable will be the actual number of |
| retransmissions used unless the |
| snmpEventNotifyMaxRetransmissions is less than |
| this object, in which case the retransmission |
| count shall be equal to |
| snmpEventNotifyMaxRetransmissions." |
| DEFVAL { 5 } |
| ::= { snmpEventNotifyEntry 2 } |
| |
| |
| snmpEventNotifyLifetime OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "seconds" |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The number of seconds this entry shall live until |
| the corresponding instance of |
| snmpEventNotifyStatus is set to 'destroy'. This |
| value shall count down to zero, at which time the |
| corresponding instance of snmpEventNotifyStatus |
| will be set to 'destroy'. Any management station |
| that is using this entry must periodically refresh |
| this value to ensure the continued delivery of |
| events." |
| DEFVAL { 86400 } |
| ::= { snmpEventNotifyEntry 3 } |
| |
| snmpEventNotifyStatus OBJECT-TYPE |
| SYNTAX RowStatus |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The state of this snmpEventNotifyEntry. This |
| object may not be set to `active' unless the |
| following columnar objects exist in this row: |
| snmpEventNotifyIntervalRequested, |
| snmpEventNotifyRetransmissionsRequested, and |
| snmpEventNotifyLifetime." |
| ::= { snmpEventNotifyEntry 4 } |
| |
| |
| -- conformance information |
| |
| snmpM2MConformance |
| OBJECT IDENTIFIER ::= { snmpM2M 2 } |
| |
| snmpM2MCompliances |
| OBJECT IDENTIFIER ::= { snmpM2MConformance 1 } |
| snmpM2MGroups OBJECT IDENTIFIER ::= { snmpM2MConformance 2 } |
| |
| -- compliance statements |
| |
| snmpM2MCompliance MODULE-COMPLIANCE |
| STATUS current |
| DESCRIPTION |
| "The compliance statement for SNMPv2 entities |
| which implement the Manager-to-Manager MIB." |
| MODULE -- this module |
| MANDATORY-GROUPS { snmpAlarmGroup, snmpEventGroup } |
| ::= { snmpM2MCompliances 1 } |
| |
| -- units of conformance |
| |
| snmpAlarmGroup OBJECT-GROUP |
| OBJECTS { snmpAlarmNextIndex, |
| snmpAlarmVariable, snmpAlarmInterval, |
| snmpAlarmSampleType, snmpAlarmValue, |
| snmpAlarmStartupAlarm, snmpAlarmRisingThreshold, |
| snmpAlarmFallingThreshold, |
| snmpAlarmRisingEventIndex, |
| snmpAlarmFallingEventIndex, |
| snmpAlarmUnavailableEventIndex, |
| snmpAlarmStatus } |
| STATUS current |
| DESCRIPTION |
| "A collection of objects allowing the description |
| and configuration of threshold alarms from a |
| SNMPv2 entity acting in a dual role." |
| ::= { snmpM2MGroups 1 } |
| |
| |
| snmpEventGroup OBJECT-GROUP |
| OBJECTS { snmpEventNextIndex, |
| snmpEventID, snmpEventDescription, |
| snmpEventEvents, snmpEventLastTimeSent, |
| snmpEventStatus, snmpEventNotifyMinInterval, |
| snmpEventNotifyMaxRetransmissions, |
| snmpEventNotifyIntervalRequested, |
| snmpEventNotifyRetransmissionsRequested, |
| snmpEventNotifyLifetime, snmpEventNotifyStatus } |
| STATUS current |
| DESCRIPTION |
| "A collection of objects allowing the description |
| and configuration of events from a SNMPv2 entity |
| acting in a dual role." |
| ::= { snmpM2MGroups 2 } |
| |
| END |
