| UCD-SNMP-MIB DEFINITIONS ::= BEGIN |
| |
| -- Design notes: |
| -- |
| -- The design of this mib may seem unusual in parts, as it was |
| -- designed for ease of numerical management routines. |
| -- |
| -- In that light, most sub-sections of this mib have four common |
| -- numerical oid consistencies: |
| -- |
| -- 2021.ID.1 : an integer index value. In scalers, this is always |
| -- of value 1. In tables it is a row index. |
| -- 2021.ID.2 : a name of the script, process, etc. that this row represents. |
| -- 2021.ID.100 : An error flag indicating if an error is present on |
| -- that row (a threshold value was crossed, etc). |
| -- 2021.ID.101 : An error string describing why the error flag is non-0. |
| -- |
| -- These conventions enable managers to easy examine portions of the |
| -- mib by setting the ID to the sub-section they are interested in |
| -- monitoring, and then scanning the .100 value to check for an |
| -- error(s), and get a more specific error message from .101 for the |
| -- named check found in .2. |
| -- |
| -- Row numbers between 2 and 100 are sub-section specific. |
| -- |
| -- Mib sections utilizing the above conventions: |
| -- Tables: procTable, execTable, diskTable, loadTable |
| -- Scalers: memory, snmperrs |
| |
| |
| IMPORTS |
| OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY, |
| Integer32, Opaque, enterprises, Counter32, Unsigned32 |
| FROM SNMPv2-SMI |
| |
| TEXTUAL-CONVENTION, DisplayString, TruthValue |
| FROM SNMPv2-TC; |
| |
| ucdavis MODULE-IDENTITY |
| LAST-UPDATED "201407310000Z" |
| ORGANIZATION "University of California, Davis" |
| CONTACT-INFO |
| "This mib is no longer being maintained by the University of |
| California and is now in life-support-mode and being |
| maintained by the net-snmp project. The best place to write |
| for public questions about the net-snmp-coders mailing list |
| at net-snmp-coders@lists.sourceforge.net. |
| |
| postal: Wes Hardaker |
| P.O. Box 382 |
| Davis CA 95617 |
| |
| email: net-snmp-coders@lists.sourceforge.net |
| " |
| DESCRIPTION |
| "This file defines the private UCD SNMP MIB extensions." |
| |
| REVISION "201407310000Z" |
| DESCRIPTION |
| "New object for number of CPUs as counted by the agent" |
| REVISION "201105140000Z" |
| DESCRIPTION |
| "New objects for monitoring CPU Steal, Guest and Nice values" |
| |
| REVISION "200901190000Z" |
| DESCRIPTION |
| "New 64-bit objects for monitoring large disk usage" |
| |
| REVISION "200611220000Z" |
| DESCRIPTION |
| "Clarify behaviour of objects in the memory & systemStats groups |
| (including updated versions of malnamed mem*Text objects). |
| Define suitable TCs to describe error reporting/fix behaviour." |
| |
| REVISION "200404070000Z" |
| DESCRIPTION |
| "Added ssCpuRawSoftIRQ for Linux (2.6) and forgotten raw swap counters." |
| |
| REVISION "200209050000Z" |
| DESCRIPTION |
| "Deprecate the non-raw objects." |
| |
| REVISION "200109200000Z" |
| DESCRIPTION |
| "Group to monitor log files" |
| |
| REVISION "200101170000Z" |
| DESCRIPTION |
| "Added raw CPU and IO counters." |
| |
| REVISION "9912090000Z" |
| DESCRIPTION |
| "SMIv2 version converted from older MIB definitions." |
| ::= { enterprises 2021 } |
| |
| -- Current UCD core mib table entries: |
| -- prTable OBJECT IDENTIFIER ::= { ucdavis 2 } |
| -- memory OBJECT IDENTIFIER ::= { ucdavis 4 } |
| -- extTable OBJECT IDENTIFIER ::= { ucdavis 8 } |
| -- diskTable OBJECT IDENTIFIER ::= { ucdavis 9 } |
| -- loadTable OBJECT IDENTIFIER ::= { ucdavis 10 } |
| -- systemStats OBJECT IDENTIFIER ::= { ucdavis 11 } |
| -- ucdDemoMIB OBJECT IDENTIFIER ::= { ucdavis 14 } - UCD-DEMO-MIB |
| -- fileTable OBJECT IDENTIFIER ::= { ucdavis 15 } |
| -- logMatch OBJECT IDENTIFIER ::= { ucdavis 16 } |
| -- version OBJECT IDENTIFIER ::= { ucdavis 100 } |
| -- snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 } |
| -- mibRegistryTable OBJECT IDENTIFIER ::= { ucdavis 102 } |
| |
| -- Older mib table entries that were changed to new locations above: |
| -- processes OBJECT IDENTIFIER ::= { ucdavis 1 } |
| -- exec OBJECT IDENTIFIER ::= { ucdavis 3 } |
| -- disk OBJECT IDENTIFIER ::= { ucdavis 6 } |
| -- load OBJECT IDENTIFIER ::= { ucdavis 7 } |
| |
| -- Never implemented and removed from the mib: |
| -- lockd OBJECT IDENTIFIER ::= { ucdavis 5 } |
| |
| -- Branches for registering other UCD MIB modules: |
| ucdInternal OBJECT IDENTIFIER ::= { ucdavis 12 } |
| ucdExperimental OBJECT IDENTIFIER ::= { ucdavis 13 } |
| |
| -- OID values assigned in the ucdExperimental branch: |
| -- ucdIpFwAccMIB OBJECT IDENTIFIER ::= { ucdExperimental 1 } - UCD-IPFWACC-MIB |
| -- ucdIpFilter OBJECT IDENTIFIER ::= { ucdExperimental 2 } - UCD-IPFILTER-MIB |
| -- wavelan OBJECT IDENTIFIER ::= { ucdExperimental 3 } - WL-MIB |
| -- ucdDlmodMIB OBJECT IDENTIFIER ::= { ucdExperimental 14 } - UCD-DLMOD-MIB |
| -- ucdDiskIOMIB OBJECT IDENTIFIER ::= { ucdExperimental 15 } - UCD-DISKIO-MIB |
| -- lmSensors OBJECT IDENTIFIER ::= { ucdExperimental 16 } - LM-SENSORS-MIB |
| |
| |
| -- These are the old returned values of the agent type. |
| -- originally returned to: .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0 |
| -- Current versions of the agent return an equivalent OID from the netSnmpAgentOIDs |
| -- tree (defined in NET-SNMP-TC), which includes values for some additional O/Ss |
| |
| ucdSnmpAgent OBJECT IDENTIFIER ::= { ucdavis 250 } |
| hpux9 OBJECT IDENTIFIER ::= { ucdSnmpAgent 1 } |
| sunos4 OBJECT IDENTIFIER ::= { ucdSnmpAgent 2 } |
| solaris OBJECT IDENTIFIER ::= { ucdSnmpAgent 3 } |
| osf OBJECT IDENTIFIER ::= { ucdSnmpAgent 4 } |
| ultrix OBJECT IDENTIFIER ::= { ucdSnmpAgent 5 } |
| hpux10 OBJECT IDENTIFIER ::= { ucdSnmpAgent 6 } |
| netbsd1 OBJECT IDENTIFIER ::= { ucdSnmpAgent 7 } |
| freebsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 8 } |
| irix OBJECT IDENTIFIER ::= { ucdSnmpAgent 9 } |
| linux OBJECT IDENTIFIER ::= { ucdSnmpAgent 10 } |
| bsdi OBJECT IDENTIFIER ::= { ucdSnmpAgent 11 } |
| openbsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 12 } |
| win32 OBJECT IDENTIFIER ::= { ucdSnmpAgent 13 } -- unlucky |
| hpux11 OBJECT IDENTIFIER ::= { ucdSnmpAgent 14 } |
| aix OBJECT IDENTIFIER ::= { ucdSnmpAgent 15 } |
| macosx OBJECT IDENTIFIER ::= { ucdSnmpAgent 16 } |
| dragonfly OBJECT IDENTIFIER ::= { ucdSnmpAgent 17 } |
| unknown OBJECT IDENTIFIER ::= { ucdSnmpAgent 255 } |
| |
| |
| -- |
| -- Define the Float Textual Convention |
| -- This definition was written by David Perkins. |
| -- |
| |
| Float ::= TEXTUAL-CONVENTION |
| STATUS current |
| DESCRIPTION |
| "A single precision floating-point number. The semantics |
| and encoding are identical for type 'single' defined in |
| IEEE Standard for Binary Floating-Point, |
| ANSI/IEEE Std 754-1985. |
| The value is restricted to the BER serialization of |
| the following ASN.1 type: |
| FLOATTYPE ::= [120] IMPLICIT FloatType |
| (note: the value 120 is the sum of '30'h and '48'h) |
| The BER serialization of the length for values of |
| this type must use the definite length, short |
| encoding form. |
| |
| For example, the BER serialization of value 123 |
| of type FLOATTYPE is '9f780442f60000'h. (The tag |
| is '9f78'h; the length is '04'h; and the value is |
| '42f60000'h.) The BER serialization of value |
| '9f780442f60000'h of data type Opaque is |
| '44079f780442f60000'h. (The tag is '44'h; the length |
| is '07'h; and the value is '9f780442f60000'h." |
| SYNTAX Opaque (SIZE (7)) |
| |
| UCDErrorFlag ::= TEXTUAL-CONVENTION |
| STATUS current |
| DESCRIPTION |
| "Represents a possible error condition" |
| SYNTAX INTEGER { noError(0), error(1) } |
| |
| UCDErrorFix ::= TEXTUAL-CONVENTION |
| STATUS current |
| DESCRIPTION |
| "Represents a 'push-button' object, to invoke a suitable |
| configured action. Will always return 0 when read." |
| SYNTAX INTEGER { noError(0), runFix(1) } |
| |
| -- |
| -- Process table checks |
| -- |
| |
| prTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF PrEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "A table containing information on running |
| programs/daemons configured for monitoring in the |
| snmpd.conf file of the agent. Processes violating the |
| number of running processes required by the agent's |
| configuration file are flagged with numerical and |
| textual errors." |
| ::= { ucdavis 2 } |
| |
| prEntry OBJECT-TYPE |
| SYNTAX PrEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "An entry containing a process and its statistics." |
| INDEX { prIndex } |
| ::= { prTable 1 } |
| |
| PrEntry ::= SEQUENCE { |
| prIndex Integer32, |
| prNames DisplayString, |
| prMin Integer32, |
| prMax Integer32, |
| prCount Integer32, |
| prErrorFlag UCDErrorFlag, |
| prErrMessage DisplayString, |
| prErrFix UCDErrorFix, |
| prErrFixCmd DisplayString |
| } |
| |
| prIndex OBJECT-TYPE |
| SYNTAX Integer32 (0..65535) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Reference Index for each observed process." |
| ::= { prEntry 1 } |
| |
| prNames OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The process name we're counting/checking on." |
| ::= { prEntry 2 } |
| |
| prMin OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The minimum number of processes that should be |
| running. An error flag is generated if the number of |
| running processes is < the minimum." |
| ::= { prEntry 3 } |
| |
| prMax OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The maximum number of processes that should be |
| running. An error flag is generated if the number of |
| running processes is > the maximum." |
| ::= { prEntry 4 } |
| |
| prCount OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of current processes running with the name |
| in question." |
| ::= { prEntry 5 } |
| |
| prErrorFlag OBJECT-TYPE |
| SYNTAX UCDErrorFlag |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "A Error flag to indicate trouble with a process. It |
| goes to 1 if there is an error, 0 if no error." |
| ::= { prEntry 100 } |
| |
| prErrMessage OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "An error message describing the problem (if one exists)." |
| ::= { prEntry 101 } |
| |
| prErrFix OBJECT-TYPE |
| SYNTAX UCDErrorFix |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "Setting this to one will try to fix the problem if |
| the agent has been configured with a script to call |
| to attempt to fix problems automatically using remote |
| snmp operations." |
| ::= { prEntry 102 } |
| |
| prErrFixCmd OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The command that gets run when the prErrFix column is |
| set to 1." |
| ::= { prEntry 103 } |
| |
| |
| |
| extTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF ExtEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "A table of extensible commands returning output and |
| result codes. These commands are configured via the |
| agent's snmpd.conf file." |
| ::= { ucdavis 8 } |
| |
| extEntry OBJECT-TYPE |
| SYNTAX ExtEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "An entry containing an extensible script/program and its output." |
| INDEX { extIndex } |
| ::= { extTable 1 } |
| |
| ExtEntry ::= SEQUENCE { |
| extIndex Integer32, |
| extNames DisplayString, |
| extCommand DisplayString, |
| extResult Integer32, |
| extOutput DisplayString, |
| extErrFix UCDErrorFix, |
| extErrFixCmd DisplayString |
| } |
| |
| extIndex OBJECT-TYPE |
| SYNTAX Integer32 (0..65535) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Reference Index for extensible scripts. Simply an |
| integer row number." |
| ::= { extEntry 1 } |
| |
| extNames OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "A Short, one name description of the extensible command." |
| ::= { extEntry 2 } |
| |
| extCommand OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The command line to be executed." |
| ::= { extEntry 3 } |
| |
| extResult OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The result code (exit status) from the executed command." |
| ::= { extEntry 100 } |
| |
| extOutput OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The first line of output of the executed command." |
| ::= { extEntry 101 } |
| |
| extErrFix OBJECT-TYPE |
| SYNTAX UCDErrorFix |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "Setting this to one will try to fix the problem if |
| the agent has been configured with a script to call |
| to attempt to fix problems automatically using remote |
| snmp operations." |
| ::= { extEntry 102 } |
| |
| extErrFixCmd OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The command that gets run when the extErrFix column is |
| set to 1." |
| ::= { extEntry 103 } |
| |
| -- |
| -- Memory usage/watch reporting. |
| -- Not supported on all systems! |
| -- See agent/mibgroup/ucd_snmp.h to see if its loaded for your architecture. |
| -- |
| memory OBJECT IDENTIFIER ::= { ucdavis 4 } |
| |
| memIndex OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Bogus Index. This should always return the integer 0." |
| ::= { memory 1 } |
| |
| memErrorName OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Bogus Name. This should always return the string 'swap'." |
| ::= { memory 2 } |
| |
| memTotalSwap OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total amount of swap space configured for this host." |
| ::= { memory 3 } |
| |
| memAvailSwap OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The amount of swap space currently unused or available." |
| ::= { memory 4 } |
| |
| memTotalReal OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total amount of real/physical memory installed |
| on this host." |
| ::= { memory 5 } |
| |
| memAvailReal OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The amount of real/physical memory currently unused |
| or available." |
| ::= { memory 6 } |
| |
| memTotalSwapTXT OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total amount of swap space or virtual memory allocated |
| for text pages on this host. |
| |
| This object will not be implemented on hosts where the |
| underlying operating system does not distinguish text |
| pages from other uses of swap space or virtual memory." |
| ::= { memory 7 } |
| |
| memAvailSwapTXT OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS deprecated |
| DESCRIPTION |
| "The amount of swap space or virtual memory currently |
| being used by text pages on this host. |
| |
| This object will not be implemented on hosts where the |
| underlying operating system does not distinguish text |
| pages from other uses of swap space or virtual memory. |
| |
| Note that (despite the name), this value reports the |
| amount used, rather than the amount free or available |
| for use. For clarity, this object is being deprecated |
| in favour of 'memUsedSwapTXT(16)." |
| ::= { memory 8 } |
| |
| memTotalRealTXT OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total amount of real/physical memory allocated |
| for text pages on this host. |
| |
| This object will not be implemented on hosts where the |
| underlying operating system does not distinguish text |
| pages from other uses of physical memory." |
| ::= { memory 9 } |
| |
| memAvailRealTXT OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS deprecated |
| DESCRIPTION |
| "The amount of real/physical memory currently being |
| used by text pages on this host. |
| |
| This object will not be implemented on hosts where the |
| underlying operating system does not distinguish text |
| pages from other uses of physical memory. |
| |
| Note that (despite the name), this value reports the |
| amount used, rather than the amount free or available |
| for use. For clarity, this object is being deprecated |
| in favour of 'memUsedRealTXT(17)." |
| ::= { memory 10 } |
| |
| memTotalFree OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total amount of memory free or available for use on |
| this host. This value typically covers both real memory |
| and swap space or virtual memory." |
| ::= { memory 11 } |
| |
| memMinimumSwap OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The minimum amount of swap space expected to be kept |
| free or available during normal operation of this host. |
| |
| If this value (as reported by 'memAvailSwap(4)') falls |
| below the specified level, then 'memSwapError(100)' will |
| be set to 1 and an error message made available via |
| 'memSwapErrorMsg(101)'." |
| ::= { memory 12 } |
| |
| memShared OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total amount of real or virtual memory currently |
| allocated for use as shared memory. |
| |
| This object will not be implemented on hosts where the |
| underlying operating system does not explicitly identify |
| memory as specifically reserved for this purpose." |
| ::= { memory 13 } |
| |
| memBuffer OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total amount of real or virtual memory currently |
| allocated for use as memory buffers. |
| |
| This object will not be implemented on hosts where the |
| underlying operating system does not explicitly identify |
| memory as specifically reserved for this purpose." |
| ::= { memory 14 } |
| |
| memCached OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total amount of real or virtual memory currently |
| allocated for use as cached memory. |
| |
| This object will not be implemented on hosts where the |
| underlying operating system does not explicitly identify |
| memory as specifically reserved for this purpose." |
| ::= { memory 15 } |
| |
| memUsedSwapTXT OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The amount of swap space or virtual memory currently |
| being used by text pages on this host. |
| |
| This object will not be implemented on hosts where the |
| underlying operating system does not distinguish text |
| pages from other uses of swap space or virtual memory." |
| ::= { memory 16 } |
| |
| memUsedRealTXT OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The amount of real/physical memory currently being |
| used by text pages on this host. |
| |
| This object will not be implemented on hosts where the |
| underlying operating system does not distinguish text |
| pages from other uses of physical memory." |
| ::= { memory 17 } |
| |
| memSwapError OBJECT-TYPE |
| SYNTAX UCDErrorFlag |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Indicates whether the amount of available swap space |
| (as reported by 'memAvailSwap(4)'), is less than the |
| desired minimum (specified by 'memMinimumSwap(12)')." |
| ::= { memory 100 } |
| |
| memSwapErrorMsg OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Describes whether the amount of available swap space |
| (as reported by 'memAvailSwap(4)'), is less than the |
| desired minimum (specified by 'memMinimumSwap(12)')." |
| ::= { memory 101 } |
| |
| |
| dskTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF DskEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Disk watching information. Partions to be watched |
| are configured by the snmpd.conf file of the agent." |
| ::= { ucdavis 9 } |
| |
| dskEntry OBJECT-TYPE |
| SYNTAX DskEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "An entry containing a disk and its statistics." |
| INDEX { dskIndex } |
| ::= { dskTable 1 } |
| |
| DskEntry ::= SEQUENCE { |
| dskIndex Integer32, |
| dskPath DisplayString, |
| dskDevice DisplayString, |
| dskMinimum Integer32, |
| dskMinPercent Integer32, |
| dskTotal Integer32, |
| dskAvail Integer32, |
| dskUsed Integer32, |
| dskPercent Integer32, |
| dskPercentNode Integer32, |
| dskErrorFlag UCDErrorFlag, |
| dskErrorMsg DisplayString, |
| dskTotalLow Unsigned32, |
| dskTotalHigh Unsigned32, |
| dskAvailLow Unsigned32, |
| dskAvailHigh Unsigned32, |
| dskUsedLow Unsigned32, |
| dskUsedHigh Unsigned32 |
| } |
| |
| dskIndex OBJECT-TYPE |
| SYNTAX Integer32 (0..65535) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Integer reference number (row number) for the disk mib." |
| ::= { dskEntry 1 } |
| |
| dskPath OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Path where the disk is mounted." |
| ::= { dskEntry 2 } |
| |
| dskDevice OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Path of the device for the partition" |
| ::= { dskEntry 3 } |
| |
| dskMinimum OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Minimum space required on the disk (in kBytes) before the |
| errors are triggered. Either this or dskMinPercent is |
| configured via the agent's snmpd.conf file." |
| ::= { dskEntry 4 } |
| |
| dskMinPercent OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Percentage of minimum space required on the disk before the |
| errors are triggered. Either this or dskMinimum is |
| configured via the agent's snmpd.conf file." |
| ::= { dskEntry 5 } |
| |
| dskTotal OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Total size of the disk/partion (kBytes). |
| For large disks (>2Tb), this value will |
| latch at INT32_MAX (2147483647)." |
| ::= { dskEntry 6 } |
| |
| dskAvail OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Available space on the disk. |
| For large lightly-used disks (>2Tb), this |
| value will latch at INT32_MAX (2147483647)." |
| ::= { dskEntry 7 } |
| |
| dskUsed OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Used space on the disk. |
| For large heavily-used disks (>2Tb), this |
| value will latch at INT32_MAX (2147483647)." |
| ::= { dskEntry 8 } |
| |
| dskPercent OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Percentage of space used on disk" |
| ::= { dskEntry 9 } |
| |
| dskPercentNode OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Percentage of inodes used on disk" |
| ::= { dskEntry 10 } |
| |
| dskTotalLow OBJECT-TYPE |
| SYNTAX Unsigned32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Total size of the disk/partion (kBytes). |
| Together with dskTotalHigh composes 64-bit number." |
| ::= { dskEntry 11 } |
| |
| dskTotalHigh OBJECT-TYPE |
| SYNTAX Unsigned32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Total size of the disk/partion (kBytes). |
| Together with dskTotalLow composes 64-bit number." |
| ::= { dskEntry 12 } |
| |
| dskAvailLow OBJECT-TYPE |
| SYNTAX Unsigned32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Available space on the disk (kBytes). |
| Together with dskAvailHigh composes 64-bit number." |
| ::= { dskEntry 13 } |
| |
| dskAvailHigh OBJECT-TYPE |
| SYNTAX Unsigned32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Available space on the disk (kBytes). |
| Together with dskAvailLow composes 64-bit number." |
| ::= { dskEntry 14 } |
| |
| dskUsedLow OBJECT-TYPE |
| SYNTAX Unsigned32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Used space on the disk (kBytes). |
| Together with dskUsedHigh composes 64-bit number." |
| ::= { dskEntry 15 } |
| |
| dskUsedHigh OBJECT-TYPE |
| SYNTAX Unsigned32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Used space on the disk (kBytes). |
| Together with dskUsedLow composes 64-bit number." |
| ::= { dskEntry 16 } |
| |
| dskErrorFlag OBJECT-TYPE |
| SYNTAX UCDErrorFlag |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Error flag signaling that the disk or partition is under |
| the minimum required space configured for it." |
| ::= { dskEntry 100 } |
| |
| dskErrorMsg OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "A text description providing a warning and the space left |
| on the disk." |
| ::= { dskEntry 101 } |
| |
| laTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF LaEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Load average information." |
| ::= { ucdavis 10 } |
| |
| laEntry OBJECT-TYPE |
| SYNTAX LaEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "An entry containing a load average and its values." |
| INDEX { laIndex } |
| ::= { laTable 1 } |
| |
| LaEntry ::= SEQUENCE { |
| laIndex Integer32, |
| laNames DisplayString, |
| laLoad DisplayString, |
| laConfig DisplayString, |
| laLoadInt Integer32, |
| laLoadFloat Float, |
| laErrorFlag UCDErrorFlag, |
| laErrMessage DisplayString |
| } |
| |
| laIndex OBJECT-TYPE |
| SYNTAX Integer32 (0..3) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "reference index/row number for each observed loadave." |
| ::= { laEntry 1 } |
| |
| laNames OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The list of loadave names we're watching." |
| ::= { laEntry 2 } |
| |
| laLoad OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The 1,5 and 15 minute load averages (one per row)." |
| ::= { laEntry 3 } |
| |
| laConfig OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "The watch point for load-averages to signal an |
| error. If the load averages rises above this value, |
| the laErrorFlag below is set." |
| ::= { laEntry 4 } |
| |
| laLoadInt OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The 1,5 and 15 minute load averages as an integer. |
| This is computed by taking the floating point |
| loadaverage value and multiplying by 100, then |
| converting the value to an integer." |
| ::= { laEntry 5 } |
| |
| laLoadFloat OBJECT-TYPE |
| SYNTAX Float |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The 1,5 and 15 minute load averages as an opaquely |
| wrapped floating point number." |
| ::= { laEntry 6 } |
| |
| laErrorFlag OBJECT-TYPE |
| SYNTAX UCDErrorFlag |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "A Error flag to indicate the load-average has crossed |
| its threshold value defined in the snmpd.conf file. |
| It is set to 1 if the threshold is crossed, 0 otherwise." |
| ::= { laEntry 100 } |
| |
| laErrMessage OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "An error message describing the load-average and its |
| surpased watch-point value." |
| ::= { laEntry 101 } |
| |
| |
| version OBJECT IDENTIFIER ::= { ucdavis 100 } |
| |
| versionIndex OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Index to mib (always 0)" |
| ::= { version 1 } |
| |
| versionTag OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "CVS tag keyword" |
| ::= { version 2 } |
| |
| versionDate OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Date string from RCS keyword" |
| ::= { version 3 } |
| |
| versionCDate OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Date string from ctime() " |
| ::= { version 4 } |
| |
| versionIdent OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Id string from RCS keyword" |
| ::= { version 5 } |
| |
| versionConfigureOptions OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Options passed to the configure script when this agent was built." |
| ::= { version 6 } |
| |
| versionClearCache OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "Set to 1 to clear the exec cache, if enabled" |
| ::= { version 10 } |
| |
| versionUpdateConfig OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "Set to 1 to read-read the config file(s)." |
| ::= { version 11 } |
| |
| versionRestartAgent OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "Set to 1 to restart the agent." |
| ::= { version 12 } |
| |
| versionSavePersistentData OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "Set to 1 to force the agent to save it's persistent data immediately." |
| ::= { version 13 } |
| |
| versionDoDebugging OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "Set to 1 to turn debugging statements on in the agent or 0 |
| to turn it off." |
| ::= { version 20 } |
| |
| |
| snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 } |
| |
| snmperrIndex OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Bogus Index for snmperrs (always 0)." |
| ::= { snmperrs 1 } |
| |
| snmperrNames OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "snmp" |
| ::= { snmperrs 2 } |
| |
| snmperrErrorFlag OBJECT-TYPE |
| SYNTAX UCDErrorFlag |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "A Error flag to indicate trouble with the agent. It |
| goes to 1 if there is an error, 0 if no error." |
| ::= { snmperrs 100 } |
| |
| snmperrErrMessage OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "An error message describing the problem (if one exists)." |
| ::= { snmperrs 101 } |
| |
| |
| mrTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF MrEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "A table displaying all the oid's registered by mib modules in |
| the agent. Since the agent is modular in nature, this lists |
| each module's OID it is responsible for and the name of the module" |
| ::= { ucdavis 102 } |
| |
| mrEntry OBJECT-TYPE |
| SYNTAX MrEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "An entry containing a registered mib oid." |
| INDEX { IMPLIED mrIndex } |
| ::= { mrTable 1 } |
| |
| MrEntry ::= SEQUENCE { |
| mrIndex OBJECT IDENTIFIER, |
| mrModuleName DisplayString |
| } |
| |
| mrIndex OBJECT-TYPE |
| SYNTAX OBJECT IDENTIFIER |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The registry slot of a mibmodule." |
| ::= { mrEntry 1 } |
| |
| mrModuleName OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The module name that registered this OID." |
| ::= { mrEntry 2 } |
| |
| systemStats OBJECT IDENTIFIER ::= { ucdavis 11 } |
| |
| ssIndex OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Bogus Index. This should always return the integer 1." |
| ::= { systemStats 1 } |
| |
| ssErrorName OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Bogus Name. This should always return the string 'systemStats'." |
| ::= { systemStats 2 } |
| |
| ssSwapIn OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The average amount of memory swapped in from disk, |
| calculated over the last minute." |
| ::= { systemStats 3 } |
| |
| ssSwapOut OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The average amount of memory swapped out to disk, |
| calculated over the last minute." |
| ::= { systemStats 4 } |
| |
| ssIOSent OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "blocks/s" |
| MAX-ACCESS read-only |
| STATUS deprecated |
| DESCRIPTION |
| "The average amount of data written to disk or other |
| block device, calculated over the last minute. |
| |
| This object has been deprecated in favour of |
| 'ssIORawSent(57)', which can be used to calculate |
| the same metric, but over any desired time period." |
| ::= { systemStats 5 } |
| |
| ssIOReceive OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "blocks/s" |
| MAX-ACCESS read-only |
| STATUS deprecated |
| DESCRIPTION |
| "The average amount of data read from disk or other |
| block device, calculated over the last minute. |
| |
| This object has been deprecated in favour of |
| 'ssIORawReceived(58)', which can be used to calculate |
| the same metric, but over any desired time period." |
| ::= { systemStats 6 } |
| |
| ssSysInterrupts OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "interrupts/s" |
| MAX-ACCESS read-only |
| STATUS deprecated |
| DESCRIPTION |
| "The average rate of interrupts processed (including |
| the clock) calculated over the last minute. |
| |
| This object has been deprecated in favour of |
| 'ssRawInterrupts(59)', which can be used to calculate |
| the same metric, but over any desired time period." |
| ::= { systemStats 7 } |
| |
| ssSysContext OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "switches/s" |
| MAX-ACCESS read-only |
| STATUS deprecated |
| DESCRIPTION |
| "The average rate of context switches, |
| calculated over the last minute. |
| |
| This object has been deprecated in favour of |
| 'ssRawContext(60)', which can be used to calculate |
| the same metric, but over any desired time period." |
| ::= { systemStats 8 } |
| |
| ssCpuUser OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS deprecated |
| DESCRIPTION |
| "The percentage of CPU time spent processing |
| user-level code, calculated over the last minute. |
| |
| This object has been deprecated in favour of |
| 'ssCpuRawUser(50)', which can be used to calculate |
| the same metric, but over any desired time period." |
| ::= { systemStats 9 } |
| |
| ssCpuSystem OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS deprecated |
| DESCRIPTION |
| "The percentage of CPU time spent processing |
| system-level code, calculated over the last minute. |
| |
| This object has been deprecated in favour of |
| 'ssCpuRawSystem(52)', which can be used to calculate |
| the same metric, but over any desired time period." |
| ::= { systemStats 10 } |
| |
| ssCpuIdle OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS deprecated |
| DESCRIPTION |
| "The percentage of processor time spent idle, |
| calculated over the last minute. |
| |
| This object has been deprecated in favour of |
| 'ssCpuRawIdle(53)', which can be used to calculate |
| the same metric, but over any desired time period." |
| ::= { systemStats 11 } |
| |
| -- The agent only implements those of the following counters that the |
| -- kernel supports! Don't expect all to be present. |
| |
| ssCpuRawUser OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of 'ticks' (typically 1/100s) spent |
| processing user-level code. |
| |
| On a multi-processor system, the 'ssCpuRaw*' |
| counters are cumulative over all CPUs, so their |
| sum will typically be N*100 (for N processors)." |
| ::= { systemStats 50 } |
| |
| ssCpuRawNice OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of 'ticks' (typically 1/100s) spent |
| processing reduced-priority code. |
| |
| This object will not be implemented on hosts where |
| the underlying operating system does not measure |
| this particular CPU metric. |
| |
| On a multi-processor system, the 'ssCpuRaw*' |
| counters are cumulative over all CPUs, so their |
| sum will typically be N*100 (for N processors)." |
| ::= { systemStats 51 } |
| |
| ssCpuRawSystem OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of 'ticks' (typically 1/100s) spent |
| processing system-level code. |
| |
| On a multi-processor system, the 'ssCpuRaw*' |
| counters are cumulative over all CPUs, so their |
| sum will typically be N*100 (for N processors). |
| |
| This object may sometimes be implemented as the |
| combination of the 'ssCpuRawWait(54)' and |
| 'ssCpuRawKernel(55)' counters, so care must be |
| taken when summing the overall raw counters." |
| ::= { systemStats 52 } |
| |
| ssCpuRawIdle OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of 'ticks' (typically 1/100s) spent |
| idle. |
| |
| On a multi-processor system, the 'ssCpuRaw*' |
| counters are cumulative over all CPUs, so their |
| sum will typically be N*100 (for N processors)." |
| ::= { systemStats 53 } |
| |
| ssCpuRawWait OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of 'ticks' (typically 1/100s) spent |
| waiting for IO. |
| |
| This object will not be implemented on hosts where |
| the underlying operating system does not measure |
| this particular CPU metric. This time may also be |
| included within the 'ssCpuRawSystem(52)' counter. |
| |
| On a multi-processor system, the 'ssCpuRaw*' |
| counters are cumulative over all CPUs, so their |
| sum will typically be N*100 (for N processors)." |
| ::= { systemStats 54 } |
| |
| ssCpuRawKernel OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of 'ticks' (typically 1/100s) spent |
| processing kernel-level code. |
| |
| This object will not be implemented on hosts where |
| the underlying operating system does not measure |
| this particular CPU metric. This time may also be |
| included within the 'ssCpuRawSystem(52)' counter. |
| |
| On a multi-processor system, the 'ssCpuRaw*' |
| counters are cumulative over all CPUs, so their |
| sum will typically be N*100 (for N processors)." |
| ::= { systemStats 55 } |
| |
| ssCpuRawInterrupt OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of 'ticks' (typically 1/100s) spent |
| processing hardware interrupts. |
| |
| This object will not be implemented on hosts where |
| the underlying operating system does not measure |
| this particular CPU metric. |
| |
| On a multi-processor system, the 'ssCpuRaw*' |
| counters are cumulative over all CPUs, so their |
| sum will typically be N*100 (for N processors)." |
| ::= { systemStats 56 } |
| |
| ssIORawSent OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Number of blocks sent to a block device" |
| ::= { systemStats 57 } |
| |
| ssIORawReceived OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Number of blocks received from a block device" |
| ::= { systemStats 58 } |
| |
| ssRawInterrupts OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Number of interrupts processed" |
| ::= { systemStats 59 } |
| |
| ssRawContexts OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Number of context switches" |
| ::= { systemStats 60 } |
| |
| ssCpuRawSoftIRQ OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of 'ticks' (typically 1/100s) spent |
| processing software interrupts. |
| |
| This object will not be implemented on hosts where |
| the underlying operating system does not measure |
| this particular CPU metric. |
| |
| On a multi-processor system, the 'ssCpuRaw*' |
| counters are cumulative over all CPUs, so their |
| sum will typically be N*100 (for N processors)." |
| ::= { systemStats 61 } |
| |
| ssRawSwapIn OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Number of blocks swapped in" |
| ::= { systemStats 62 } |
| |
| ssRawSwapOut OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Number of blocks swapped out" |
| ::= { systemStats 63 } |
| |
| ssCpuRawSteal OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of 'ticks' (typically 1/100s) spent |
| by the hypervisor code to run other VMs even |
| though the CPU in the current VM had something runnable. |
| |
| This object will not be implemented on hosts where |
| the underlying operating system does not measure |
| this particular CPU metric. |
| |
| On a multi-processor system, the 'ssCpuRaw*' |
| counters are cumulative over all CPUs, so their |
| sum will typically be N*100 (for N processors)." |
| ::= { systemStats 64 } |
| |
| ssCpuRawGuest OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of 'ticks' (typically 1/100s) spent |
| by the CPU to run a virtual CPU (guest). |
| |
| This object will not be implemented on hosts where |
| the underlying operating system does not measure |
| this particular CPU metric. |
| |
| On a multi-processor system, the 'ssCpuRaw*' |
| counters are cumulative over all CPUs, so their |
| sum will typically be N*100 (for N processors)." |
| ::= { systemStats 65 } |
| |
| ssCpuRawGuestNice OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of 'ticks' (typically 1/100s) spent |
| by the CPU to run a niced virtual CPU (guest). |
| |
| This object will not be implemented on hosts where |
| the underlying operating system does not measure |
| this particular CPU metric. |
| |
| On a multi-processor system, the 'ssCpuRaw*' |
| counters are cumulative over all CPUs, so their |
| sum will typically be N*100 (for N processors)." |
| ::= { systemStats 66 } |
| |
| ssCpuNumCpus OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The number of processors, as counted by the agent. |
| This object's value may be useful in the management |
| of certain operating systems where notions such as |
| load average do not take into account the number of |
| processors in the system. |
| |
| For other objects in the systemStats group whose |
| descriptions refer to 'N processors', this object's |
| value is N." |
| ::= { systemStats 67 } |
| |
| |
| -- possibly used in the future: |
| -- |
| -- ssErrorFlag OBJECT-TYPE |
| -- SYNTAX UCDErrorFlag |
| -- MAX-ACCESS read-only |
| -- STATUS current |
| -- DESCRIPTION |
| -- "Error flag." |
| -- ::= { systemStats 100 } |
| -- |
| -- ssErrMessage OBJECT-TYPE |
| -- SYNTAX DisplayString |
| -- MAX-ACCESS read-only |
| -- STATUS current |
| -- DESCRIPTION |
| -- "Error message describing the errorflag condition." |
| -- ::= { systemStats 101 } |
| |
| |
| ucdTraps OBJECT IDENTIFIER ::= { ucdavis 251 } |
| |
| ucdStart NOTIFICATION-TYPE |
| STATUS current |
| DESCRIPTION |
| "This trap could in principle be sent when the agent start" |
| ::= { ucdTraps 1 } |
| |
| ucdShutdown NOTIFICATION-TYPE |
| STATUS current |
| DESCRIPTION |
| "This trap is sent when the agent terminates" |
| ::= { ucdTraps 2 } |
| |
| -- |
| -- File Table: monitor a list of files to check for a maximum size. |
| -- |
| |
| fileTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF FileEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Table of monitored files." |
| ::= { ucdavis 15 } |
| |
| fileEntry OBJECT-TYPE |
| SYNTAX FileEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Entry of file" |
| INDEX { fileIndex } |
| ::= { fileTable 1 } |
| |
| FileEntry ::= SEQUENCE { |
| fileIndex Integer32, |
| fileName DisplayString, |
| fileSize Integer32, |
| fileMax Integer32, |
| fileErrorFlag UCDErrorFlag, |
| fileErrorMsg DisplayString |
| } |
| |
| fileIndex OBJECT-TYPE |
| SYNTAX Integer32 (0..2147483647) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Index of file" |
| ::= { fileEntry 1 } |
| |
| fileName OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Filename" |
| ::= { fileEntry 2 } |
| |
| fileSize OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Size of file (kB)" |
| ::= { fileEntry 3 } |
| |
| fileMax OBJECT-TYPE |
| SYNTAX Integer32 |
| UNITS "kB" |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Limit of filesize (kB)" |
| ::= { fileEntry 4 } |
| |
| fileErrorFlag OBJECT-TYPE |
| SYNTAX UCDErrorFlag |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Limit exceeded flag" |
| ::= { fileEntry 100 } |
| |
| fileErrorMsg OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Filesize error message" |
| ::= { fileEntry 101 } |
| |
| logMatch OBJECT IDENTIFIER ::= { ucdavis 16 } |
| |
| logMatchMaxEntries OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The maximum number of logmatch entries |
| this snmpd daemon can support." |
| ::= { logMatch 1 } |
| |
| logMatchTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF LogMatchEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Table of monitored files." |
| ::= { logMatch 2 } |
| |
| logMatchEntry OBJECT-TYPE |
| SYNTAX LogMatchEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Entry of file" |
| INDEX { logMatchIndex } |
| ::= { logMatchTable 1 } |
| |
| LogMatchEntry ::= |
| SEQUENCE { |
| logMatchIndex |
| Integer32, |
| logMatchName |
| DisplayString, |
| logMatchFilename |
| DisplayString, |
| logMatchRegEx |
| DisplayString, |
| logMatchGlobalCounter |
| Counter32, |
| logMatchGlobalCount |
| Integer32, |
| logMatchCurrentCounter |
| Counter32, |
| logMatchCurrentCount |
| Integer32, |
| logMatchCounter |
| Counter32, |
| logMatchCount |
| Integer32, |
| logMatchCycle |
| Integer32, |
| logMatchErrorFlag |
| UCDErrorFlag, |
| logMatchRegExCompilation |
| DisplayString |
| } |
| |
| logMatchIndex OBJECT-TYPE |
| SYNTAX Integer32 (1..2147483647) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Index of logmatch" |
| ::= { logMatchEntry 1 } |
| |
| logMatchName OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "logmatch instance name" |
| ::= { logMatchEntry 2 } |
| |
| logMatchFilename OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "filename to be logmatched" |
| ::= { logMatchEntry 3 } |
| |
| logMatchRegEx OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "regular expression" |
| ::= { logMatchEntry 4 } |
| |
| logMatchGlobalCounter OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "global count of matches" |
| ::= { logMatchEntry 5 } |
| |
| logMatchGlobalCount OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Description." |
| ::= { logMatchEntry 6 } |
| |
| logMatchCurrentCounter OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Regex match counter. This counter will |
| be reset with each logfile rotation." |
| ::= { logMatchEntry 7 } |
| |
| logMatchCurrentCount OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Description." |
| ::= { logMatchEntry 8 } |
| |
| logMatchCounter OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Regex match counter. This counter will |
| be reset with each read" |
| ::= { logMatchEntry 9 } |
| |
| logMatchCount OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "Description." |
| ::= { logMatchEntry 10 } |
| |
| logMatchCycle OBJECT-TYPE |
| SYNTAX Integer32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "time between updates (if not queried) in seconds" |
| ::= { logMatchEntry 11 } |
| |
| logMatchErrorFlag OBJECT-TYPE |
| SYNTAX UCDErrorFlag |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "errorflag: is this line configured correctly?" |
| ::= { logMatchEntry 100 } |
| |
| logMatchRegExCompilation OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "message of regex precompilation" |
| ::= { logMatchEntry 101 } |
| |
| END |
