| SNMPv2-MIB DEFINITIONS ::= BEGIN |
| |
| IMPORTS |
| MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, |
| TimeTicks, Counter32, snmpModules, mib-2 |
| FROM SNMPv2-SMI |
| DisplayString, TestAndIncr, TimeStamp |
| |
| FROM SNMPv2-TC |
| MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP |
| FROM SNMPv2-CONF; |
| |
| snmpMIB MODULE-IDENTITY |
| LAST-UPDATED "200210160000Z" |
| ORGANIZATION "IETF SNMPv3 Working Group" |
| CONTACT-INFO |
| "WG-EMail: snmpv3@lists.tislabs.com |
| Subscribe: snmpv3-request@lists.tislabs.com |
| |
| Co-Chair: Russ Mundy |
| Network Associates Laboratories |
| postal: 15204 Omega Drive, Suite 300 |
| Rockville, MD 20850-4601 |
| USA |
| EMail: mundy@tislabs.com |
| phone: +1 301 947-7107 |
| |
| Co-Chair: David Harrington |
| Enterasys Networks |
| postal: 35 Industrial Way |
| P. O. Box 5005 |
| Rochester, NH 03866-5005 |
| USA |
| EMail: dbh@enterasys.com |
| phone: +1 603 337-2614 |
| |
| Editor: Randy Presuhn |
| BMC Software, Inc. |
| postal: 2141 North First Street |
| San Jose, CA 95131 |
| USA |
| EMail: randy_presuhn@bmc.com |
| phone: +1 408 546-1006" |
| DESCRIPTION |
| "The MIB module for SNMP entities. |
| |
| Copyright (C) The Internet Society (2002). This |
| version of this MIB module is part of RFC 3418; |
| see the RFC itself for full legal notices. |
| " |
| REVISION "200210160000Z" |
| DESCRIPTION |
| "This revision of this MIB module was published as |
| RFC 3418." |
| REVISION "199511090000Z" |
| DESCRIPTION |
| "This revision of this MIB module was published as |
| RFC 1907." |
| REVISION "199304010000Z" |
| DESCRIPTION |
| "The initial revision of this MIB module was published |
| as RFC 1450." |
| ::= { snmpModules 1 } |
| |
| snmpMIBObjects OBJECT IDENTIFIER ::= { snmpMIB 1 } |
| |
| -- ::= { snmpMIBObjects 1 } this OID is obsolete |
| -- ::= { snmpMIBObjects 2 } this OID is obsolete |
| -- ::= { snmpMIBObjects 3 } this OID is obsolete |
| |
| -- the System group |
| -- |
| -- a collection of objects common to all managed systems. |
| |
| system OBJECT IDENTIFIER ::= { mib-2 1 } |
| |
| sysDescr OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "A textual description of the entity. This value should |
| include the full name and version identification of |
| the system's hardware type, software operating-system, |
| and networking software." |
| ::= { system 1 } |
| |
| sysObjectID OBJECT-TYPE |
| SYNTAX OBJECT IDENTIFIER |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The vendor's authoritative identification of the |
| network management subsystem contained in the entity. |
| This value is allocated within the SMI enterprises |
| subtree (1.3.6.1.4.1) and provides an easy and |
| unambiguous means for determining `what kind of box' is |
| being managed. For example, if vendor `Flintstones, |
| Inc.' was assigned the subtree 1.3.6.1.4.1.424242, |
| it could assign the identifier 1.3.6.1.4.1.424242.1.1 |
| to its `Fred Router'." |
| ::= { system 2 } |
| |
| sysUpTime OBJECT-TYPE |
| SYNTAX TimeTicks |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The time (in hundredths of a second) since the |
| network management portion of the system was last |
| re-initialized." |
| ::= { system 3 } |
| |
| sysContact OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "The textual identification of the contact person for |
| this managed node, together with information on how |
| to contact this person. If no contact information is |
| known, the value is the zero-length string." |
| ::= { system 4 } |
| |
| sysName OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "An administratively-assigned name for this managed |
| node. By convention, this is the node's fully-qualified |
| domain name. If the name is unknown, the value is |
| the zero-length string." |
| ::= { system 5 } |
| |
| sysLocation OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "The physical location of this node (e.g., 'telephone |
| closet, 3rd floor'). If the location is unknown, the |
| value is the zero-length string." |
| ::= { system 6 } |
| |
| sysServices OBJECT-TYPE |
| SYNTAX INTEGER (0..127) |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "A value which indicates the set of services that this |
| entity may potentially offer. The value is a sum. |
| |
| This sum initially takes the value zero. Then, for |
| each layer, L, in the range 1 through 7, that this node |
| performs transactions for, 2 raised to (L - 1) is added |
| to the sum. For example, a node which performs only |
| routing functions would have a value of 4 (2^(3-1)). |
| In contrast, a node which is a host offering application |
| services would have a value of 72 (2^(4-1) + 2^(7-1)). |
| Note that in the context of the Internet suite of |
| protocols, values should be calculated accordingly: |
| |
| layer functionality |
| 1 physical (e.g., repeaters) |
| 2 datalink/subnetwork (e.g., bridges) |
| 3 internet (e.g., supports the IP) |
| 4 end-to-end (e.g., supports the TCP) |
| 7 applications (e.g., supports the SMTP) |
| |
| For systems including OSI protocols, layers 5 and 6 |
| may also be counted." |
| ::= { system 7 } |
| |
| -- object resource information |
| -- |
| -- a collection of objects which describe the SNMP entity's |
| -- (statically and dynamically configurable) support of |
| -- various MIB modules. |
| |
| sysORLastChange OBJECT-TYPE |
| SYNTAX TimeStamp |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of sysUpTime at the time of the most recent |
| change in state or value of any instance of sysORID." |
| ::= { system 8 } |
| |
| sysORTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SysOREntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "The (conceptual) table listing the capabilities of |
| the local SNMP application acting as a command |
| responder with respect to various MIB modules. |
| SNMP entities having dynamically-configurable support |
| of MIB modules will have a dynamically-varying number |
| of conceptual rows." |
| ::= { system 9 } |
| |
| sysOREntry OBJECT-TYPE |
| SYNTAX SysOREntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "An entry (conceptual row) in the sysORTable." |
| INDEX { sysORIndex } |
| ::= { sysORTable 1 } |
| |
| SysOREntry ::= SEQUENCE { |
| sysORIndex INTEGER, |
| sysORID OBJECT IDENTIFIER, |
| sysORDescr DisplayString, |
| sysORUpTime TimeStamp |
| } |
| |
| sysORIndex OBJECT-TYPE |
| SYNTAX INTEGER (1..2147483647) |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "The auxiliary variable used for identifying instances |
| of the columnar objects in the sysORTable." |
| ::= { sysOREntry 1 } |
| |
| sysORID OBJECT-TYPE |
| SYNTAX OBJECT IDENTIFIER |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "An authoritative identification of a capabilities |
| statement with respect to various MIB modules supported |
| by the local SNMP application acting as a command |
| responder." |
| ::= { sysOREntry 2 } |
| |
| sysORDescr OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "A textual description of the capabilities identified |
| by the corresponding instance of sysORID." |
| ::= { sysOREntry 3 } |
| |
| sysORUpTime OBJECT-TYPE |
| SYNTAX TimeStamp |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The value of sysUpTime at the time this conceptual |
| row was last instantiated." |
| ::= { sysOREntry 4 } |
| |
| -- the SNMP group |
| -- |
| -- a collection of objects providing basic instrumentation and |
| -- control of an SNMP entity. |
| |
| snmp OBJECT IDENTIFIER ::= { mib-2 11 } |
| |
| snmpInPkts OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total number of messages delivered to the SNMP |
| entity from the transport service." |
| ::= { snmp 1 } |
| |
| snmpInBadVersions OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total number of SNMP messages which were delivered |
| to the SNMP entity and were for an unsupported SNMP |
| version." |
| ::= { snmp 3 } |
| |
| snmpInBadCommunityNames OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total number of community-based SNMP messages (for |
| example, SNMPv1) delivered to the SNMP entity which |
| used an SNMP community name not known to said entity. |
| Also, implementations which authenticate community-based |
| SNMP messages using check(s) in addition to matching |
| the community name (for example, by also checking |
| whether the message originated from a transport address |
| allowed to use a specified community name) MAY include |
| in this value the number of messages which failed the |
| additional check(s). It is strongly RECOMMENDED that |
| |
| the documentation for any security model which is used |
| to authenticate community-based SNMP messages specify |
| the precise conditions that contribute to this value." |
| ::= { snmp 4 } |
| |
| snmpInBadCommunityUses OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total number of community-based SNMP messages (for |
| example, SNMPv1) delivered to the SNMP entity which |
| represented an SNMP operation that was not allowed for |
| the SNMP community named in the message. The precise |
| conditions under which this counter is incremented |
| (if at all) depend on how the SNMP entity implements |
| its access control mechanism and how its applications |
| interact with that access control mechanism. It is |
| strongly RECOMMENDED that the documentation for any |
| access control mechanism which is used to control access |
| to and visibility of MIB instrumentation specify the |
| precise conditions that contribute to this value." |
| ::= { snmp 5 } |
| |
| snmpInASNParseErrs OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total number of ASN.1 or BER errors encountered by |
| the SNMP entity when decoding received SNMP messages." |
| ::= { snmp 6 } |
| |
| snmpEnableAuthenTraps OBJECT-TYPE |
| SYNTAX INTEGER { enabled(1), disabled(2) } |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "Indicates whether the SNMP entity is permitted to |
| generate authenticationFailure traps. The value of this |
| object overrides any configuration information; as such, |
| it provides a means whereby all authenticationFailure |
| traps may be disabled. |
| |
| Note that it is strongly recommended that this object |
| be stored in non-volatile memory so that it remains |
| constant across re-initializations of the network |
| management system." |
| ::= { snmp 30 } |
| |
| snmpSilentDrops OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total number of Confirmed Class PDUs (such as |
| GetRequest-PDUs, GetNextRequest-PDUs, |
| GetBulkRequest-PDUs, SetRequest-PDUs, and |
| InformRequest-PDUs) delivered to the SNMP entity which |
| were silently dropped because the size of a reply |
| containing an alternate Response Class PDU (such as a |
| Response-PDU) with an empty variable-bindings field |
| was greater than either a local constraint or the |
| maximum message size associated with the originator of |
| the request." |
| ::= { snmp 31 } |
| |
| snmpProxyDrops OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION |
| "The total number of Confirmed Class PDUs |
| (such as GetRequest-PDUs, GetNextRequest-PDUs, |
| GetBulkRequest-PDUs, SetRequest-PDUs, and |
| InformRequest-PDUs) delivered to the SNMP entity which |
| were silently dropped because the transmission of |
| the (possibly translated) message to a proxy target |
| failed in a manner (other than a time-out) such that |
| no Response Class PDU (such as a Response-PDU) could |
| be returned." |
| ::= { snmp 32 } |
| |
| -- information for notifications |
| -- |
| -- a collection of objects which allow the SNMP entity, when |
| -- supporting a notification originator application, |
| -- to be configured to generate SNMPv2-Trap-PDUs. |
| |
| snmpTrap OBJECT IDENTIFIER ::= { snmpMIBObjects 4 } |
| |
| snmpTrapOID OBJECT-TYPE |
| SYNTAX OBJECT IDENTIFIER |
| MAX-ACCESS accessible-for-notify |
| STATUS current |
| DESCRIPTION |
| "The authoritative identification of the notification |
| currently being sent. This variable occurs as |
| the second varbind in every SNMPv2-Trap-PDU and |
| InformRequest-PDU." |
| ::= { snmpTrap 1 } |
| |
| -- ::= { snmpTrap 2 } this OID is obsolete |
| |
| snmpTrapEnterprise OBJECT-TYPE |
| SYNTAX OBJECT IDENTIFIER |
| MAX-ACCESS accessible-for-notify |
| STATUS current |
| DESCRIPTION |
| "The authoritative identification of the enterprise |
| associated with the trap currently being sent. When an |
| SNMP proxy agent is mapping an RFC1157 Trap-PDU |
| into a SNMPv2-Trap-PDU, this variable occurs as the |
| last varbind." |
| ::= { snmpTrap 3 } |
| |
| -- ::= { snmpTrap 4 } this OID is obsolete |
| |
| -- well-known traps |
| |
| snmpTraps OBJECT IDENTIFIER ::= { snmpMIBObjects 5 } |
| |
| coldStart NOTIFICATION-TYPE |
| STATUS current |
| DESCRIPTION |
| "A coldStart trap signifies that the SNMP entity, |
| supporting a notification originator application, is |
| reinitializing itself and that its configuration may |
| have been altered." |
| ::= { snmpTraps 1 } |
| |
| warmStart NOTIFICATION-TYPE |
| STATUS current |
| DESCRIPTION |
| "A warmStart trap signifies that the SNMP entity, |
| supporting a notification originator application, |
| is reinitializing itself such that its configuration |
| is unaltered." |
| ::= { snmpTraps 2 } |
| |
| -- Note the linkDown NOTIFICATION-TYPE ::= { snmpTraps 3 } |
| -- and the linkUp NOTIFICATION-TYPE ::= { snmpTraps 4 } |
| -- are defined in RFC 2863 [RFC2863] |
| |
| authenticationFailure NOTIFICATION-TYPE |
| STATUS current |
| DESCRIPTION |
| "An authenticationFailure trap signifies that the SNMP |
| entity has received a protocol message that is not |
| properly authenticated. While all implementations |
| of SNMP entities MAY be capable of generating this |
| trap, the snmpEnableAuthenTraps object indicates |
| whether this trap will be generated." |
| ::= { snmpTraps 5 } |
| |
| -- Note the egpNeighborLoss notification is defined |
| -- as { snmpTraps 6 } in RFC 1213 |
| |
| -- the set group |
| -- |
| -- a collection of objects which allow several cooperating |
| -- command generator applications to coordinate their use of the |
| -- set operation. |
| |
| snmpSet OBJECT IDENTIFIER ::= { snmpMIBObjects 6 } |
| |
| snmpSetSerialNo OBJECT-TYPE |
| SYNTAX TestAndIncr |
| MAX-ACCESS read-write |
| STATUS current |
| DESCRIPTION |
| "An advisory lock used to allow several cooperating |
| command generator applications to coordinate their |
| use of the SNMP set operation. |
| |
| This object is used for coarse-grain coordination. |
| To achieve fine-grain coordination, one or more similar |
| objects might be defined within each MIB group, as |
| appropriate." |
| ::= { snmpSet 1 } |
| |
| -- conformance information |
| |
| snmpMIBConformance |
| OBJECT IDENTIFIER ::= { snmpMIB 2 } |
| |
| snmpMIBCompliances |
| OBJECT IDENTIFIER ::= { snmpMIBConformance 1 } |
| snmpMIBGroups OBJECT IDENTIFIER ::= { snmpMIBConformance 2 } |
| |
| -- compliance statements |
| |
| -- ::= { snmpMIBCompliances 1 } this OID is obsolete |
| snmpBasicCompliance MODULE-COMPLIANCE |
| STATUS deprecated |
| DESCRIPTION |
| "The compliance statement for SNMPv2 entities which |
| implement the SNMPv2 MIB. |
| |
| This compliance statement is replaced by |
| snmpBasicComplianceRev2." |
| MODULE -- this module |
| MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup, |
| snmpBasicNotificationsGroup } |
| |
| GROUP snmpCommunityGroup |
| DESCRIPTION |
| "This group is mandatory for SNMPv2 entities which |
| support community-based authentication." |
| ::= { snmpMIBCompliances 2 } |
| |
| snmpBasicComplianceRev2 MODULE-COMPLIANCE |
| STATUS current |
| DESCRIPTION |
| "The compliance statement for SNMP entities which |
| implement this MIB module." |
| MODULE -- this module |
| MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup, |
| snmpBasicNotificationsGroup } |
| |
| GROUP snmpCommunityGroup |
| DESCRIPTION |
| "This group is mandatory for SNMP entities which |
| support community-based authentication." |
| |
| GROUP snmpWarmStartNotificationGroup |
| DESCRIPTION |
| "This group is mandatory for an SNMP entity which |
| supports command responder applications, and is |
| able to reinitialize itself such that its |
| configuration is unaltered." |
| ::= { snmpMIBCompliances 3 } |
| |
| -- units of conformance |
| |
| -- ::= { snmpMIBGroups 1 } this OID is obsolete |
| -- ::= { snmpMIBGroups 2 } this OID is obsolete |
| -- ::= { snmpMIBGroups 3 } this OID is obsolete |
| |
| -- ::= { snmpMIBGroups 4 } this OID is obsolete |
| |
| snmpGroup OBJECT-GROUP |
| OBJECTS { snmpInPkts, |
| snmpInBadVersions, |
| snmpInASNParseErrs, |
| snmpSilentDrops, |
| snmpProxyDrops, |
| snmpEnableAuthenTraps } |
| STATUS current |
| DESCRIPTION |
| "A collection of objects providing basic instrumentation |
| and control of an SNMP entity." |
| ::= { snmpMIBGroups 8 } |
| |
| snmpCommunityGroup OBJECT-GROUP |
| OBJECTS { snmpInBadCommunityNames, |
| snmpInBadCommunityUses } |
| STATUS current |
| DESCRIPTION |
| "A collection of objects providing basic instrumentation |
| of a SNMP entity which supports community-based |
| authentication." |
| ::= { snmpMIBGroups 9 } |
| |
| snmpSetGroup OBJECT-GROUP |
| OBJECTS { snmpSetSerialNo } |
| STATUS current |
| DESCRIPTION |
| "A collection of objects which allow several cooperating |
| command generator applications to coordinate their |
| use of the set operation." |
| ::= { snmpMIBGroups 5 } |
| |
| systemGroup OBJECT-GROUP |
| OBJECTS { sysDescr, sysObjectID, sysUpTime, |
| sysContact, sysName, sysLocation, |
| sysServices, |
| sysORLastChange, sysORID, |
| sysORUpTime, sysORDescr } |
| STATUS current |
| DESCRIPTION |
| "The system group defines objects which are common to all |
| managed systems." |
| ::= { snmpMIBGroups 6 } |
| |
| snmpBasicNotificationsGroup NOTIFICATION-GROUP |
| NOTIFICATIONS { coldStart, authenticationFailure } |
| STATUS current |
| DESCRIPTION |
| "The basic notifications implemented by an SNMP entity |
| supporting command responder applications." |
| ::= { snmpMIBGroups 7 } |
| |
| snmpWarmStartNotificationGroup NOTIFICATION-GROUP |
| NOTIFICATIONS { warmStart } |
| STATUS current |
| DESCRIPTION |
| "An additional notification for an SNMP entity supporting |
| command responder applications, if it is able to reinitialize |
| itself such that its configuration is unaltered." |
| ::= { snmpMIBGroups 11 } |
| |
| snmpNotificationGroup OBJECT-GROUP |
| OBJECTS { snmpTrapOID, snmpTrapEnterprise } |
| STATUS current |
| DESCRIPTION |
| "These objects are required for entities |
| which support notification originator applications." |
| ::= { snmpMIBGroups 12 } |
| |
| -- definitions in RFC 1213 made obsolete by the inclusion of a |
| -- subset of the snmp group in this MIB |
| |
| snmpOutPkts OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP Messages which were |
| passed from the SNMP protocol entity to the |
| transport service." |
| ::= { snmp 2 } |
| |
| -- { snmp 7 } is not used |
| |
| snmpInTooBigs OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP PDUs which were |
| delivered to the SNMP protocol entity and for |
| which the value of the error-status field was |
| `tooBig'." |
| ::= { snmp 8 } |
| |
| snmpInNoSuchNames OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP PDUs which were |
| delivered to the SNMP protocol entity and for |
| which the value of the error-status field was |
| `noSuchName'." |
| ::= { snmp 9 } |
| |
| snmpInBadValues OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP PDUs which were |
| delivered to the SNMP protocol entity and for |
| which the value of the error-status field was |
| `badValue'." |
| ::= { snmp 10 } |
| |
| snmpInReadOnlys OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number valid SNMP PDUs which were delivered |
| to the SNMP protocol entity and for which the value |
| of the error-status field was `readOnly'. It should |
| be noted that it is a protocol error to generate an |
| SNMP PDU which contains the value `readOnly' in the |
| error-status field, as such this object is provided |
| as a means of detecting incorrect implementations of |
| the SNMP." |
| ::= { snmp 11 } |
| |
| snmpInGenErrs OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP PDUs which were delivered |
| to the SNMP protocol entity and for which the value |
| of the error-status field was `genErr'." |
| ::= { snmp 12 } |
| |
| snmpInTotalReqVars OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of MIB objects which have been |
| retrieved successfully by the SNMP protocol entity |
| as the result of receiving valid SNMP Get-Request |
| and Get-Next PDUs." |
| ::= { snmp 13 } |
| |
| snmpInTotalSetVars OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of MIB objects which have been |
| altered successfully by the SNMP protocol entity as |
| the result of receiving valid SNMP Set-Request PDUs." |
| ::= { snmp 14 } |
| |
| snmpInGetRequests OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP Get-Request PDUs which |
| have been accepted and processed by the SNMP |
| protocol entity." |
| ::= { snmp 15 } |
| |
| snmpInGetNexts OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP Get-Next PDUs which have been |
| accepted and processed by the SNMP protocol entity." |
| ::= { snmp 16 } |
| |
| snmpInSetRequests OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP Set-Request PDUs which |
| have been accepted and processed by the SNMP protocol |
| entity." |
| ::= { snmp 17 } |
| |
| snmpInGetResponses OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP Get-Response PDUs which |
| have been accepted and processed by the SNMP protocol |
| entity." |
| ::= { snmp 18 } |
| |
| snmpInTraps OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP Trap PDUs which have been |
| accepted and processed by the SNMP protocol entity." |
| ::= { snmp 19 } |
| |
| snmpOutTooBigs OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP PDUs which were generated |
| by the SNMP protocol entity and for which the value |
| of the error-status field was `tooBig.'" |
| ::= { snmp 20 } |
| |
| snmpOutNoSuchNames OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP PDUs which were generated |
| by the SNMP protocol entity and for which the value |
| of the error-status was `noSuchName'." |
| ::= { snmp 21 } |
| |
| snmpOutBadValues OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP PDUs which were generated |
| by the SNMP protocol entity and for which the value |
| of the error-status field was `badValue'." |
| ::= { snmp 22 } |
| |
| -- { snmp 23 } is not used |
| |
| snmpOutGenErrs OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP PDUs which were generated |
| by the SNMP protocol entity and for which the value |
| of the error-status field was `genErr'." |
| ::= { snmp 24 } |
| |
| snmpOutGetRequests OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP Get-Request PDUs which |
| have been generated by the SNMP protocol entity." |
| ::= { snmp 25 } |
| |
| snmpOutGetNexts OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP Get-Next PDUs which have |
| been generated by the SNMP protocol entity." |
| ::= { snmp 26 } |
| |
| snmpOutSetRequests OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP Set-Request PDUs which |
| have been generated by the SNMP protocol entity." |
| ::= { snmp 27 } |
| |
| snmpOutGetResponses OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP Get-Response PDUs which |
| have been generated by the SNMP protocol entity." |
| ::= { snmp 28 } |
| |
| snmpOutTraps OBJECT-TYPE |
| SYNTAX Counter32 |
| MAX-ACCESS read-only |
| STATUS obsolete |
| DESCRIPTION |
| "The total number of SNMP Trap PDUs which have |
| been generated by the SNMP protocol entity." |
| ::= { snmp 29 } |
| |
| snmpObsoleteGroup OBJECT-GROUP |
| OBJECTS { snmpOutPkts, snmpInTooBigs, snmpInNoSuchNames, |
| snmpInBadValues, snmpInReadOnlys, snmpInGenErrs, |
| snmpInTotalReqVars, snmpInTotalSetVars, |
| snmpInGetRequests, snmpInGetNexts, snmpInSetRequests, |
| snmpInGetResponses, snmpInTraps, snmpOutTooBigs, |
| snmpOutNoSuchNames, snmpOutBadValues, |
| snmpOutGenErrs, snmpOutGetRequests, snmpOutGetNexts, |
| snmpOutSetRequests, snmpOutGetResponses, snmpOutTraps |
| } |
| STATUS obsolete |
| DESCRIPTION |
| "A collection of objects from RFC 1213 made obsolete |
| by this MIB module." |
| ::= { snmpMIBGroups 10 } |
| |
| END |
