| /* config.h: a general config file */ |
| |
| /* don't change these values! */ |
| #define SNMPV1 0xAAAA /* readable by anyone */ |
| #define SNMPV2ANY 0xA000 /* V2 Any type (includes NoAuth) */ |
| #define SNMPV2AUTH 0x8000 /* V2 Authenticated requests only */ |
| |
| @TOP@ |
| |
| /* SNMPLIBDIR contains important files */ |
| |
| #undef SNMPLIBPATH |
| |
| /* mib pointer to the top of the extensible tree point this to the |
| location in the tree your company/organization has been allocated. |
| If you don't have an official one (like me), just make one up that |
| doesn't overlap with other mibs you are using on the system */ |
| |
| #define EXTENSIBLEMIB 1,3,6,1,4,10 /* location of the extensible mib tree */ |
| #define EXTENSIBLEDOTMIB 1.3.6.1.4.10 /* location of the extensible mib tree */ |
| #define EXTENSIBLENUM 6 /* count the above numbers */ |
| |
| /* LOGFILE: If defined it closes stdout/err/in and opens this in out/err's |
| place. (stdin is closed so that sh scripts won't wait for it) */ |
| |
| #undef LOGFILE |
| |
| /* to hack in forced V2 security, I had to reserve the left byte of |
| the ACL Mib word for V2. Do NOT define more than 5 V1 communities |
| else they will roll into these definitions (see snmp_vars.c:340) |
| If GLOBALSECURITY is defined, it sets the default SNMP access type |
| for the extensible mibs to the setting type described. */ |
| |
| #define GLOBALSECURITY SNMPV2AUTH /* only authenticated snmpv2 requests |
| permited */ |
| |
| /* configuration files. I rdist the first one and leave machine |
| specific stuff in the second one */ |
| |
| /* default system contact */ |
| #undef SYS_CONTACT |
| |
| /* system location */ |
| #undef SYS_LOC |
| |
| /* location of UNIX kernel */ |
| #define KERNEL_LOC "/vmunix" |
| |
| /* location of swap device (ok if not found) */ |
| #undef DMEM_LOC |
| |
| /* define rtentry to ortentry on SYSV machines (alphas) */ |
| #define RTENTRY rtentry; |
| |
| /* Use BSD 4.4 routing table entries? */ |
| #undef RTENTRY_4_4 |
| |
| /* Does the rtentry structure have a rt_next node */ |
| #undef RTENTRY_RT_NEXT |
| |
| /* Command to generate ps output, the final column must be the process |
| name withOUT arguments */ |
| |
| #define PSCMD "/bin/ps" |
| |
| /* debugging stuff */ |
| #undef DODEBUG |
| |
| @BOTTOM@ |
| |
| |
| /* the ErrorFlag is V1 accessable because HP Openview does not support |
| V2. You can make this list of pairs as long as you want, just make |
| sure to end it in -1.*/ |
| |
| #define SECURITYEXCEPTIONS {100,SNMPV1,-1} /* the ErrorFlag is V1 */ |
| |
| /* Mib-2 tree Info */ |
| /* These are the system information variables. */ |
| |
| #define VERS_DESC "unknown" /* overridden at run time */ |
| #define SYS_NAME "unknown" /* overridden at run time */ |
| |
| /* comment out the second define to turn off functionality for any of |
| these: (See README for details) */ |
| |
| #define PROCMIBNUM 1 /* proc PROCESSNAME [MAX] [MIN] */ |
| #define USEPROCMIB |
| |
| #define SHELLMIBNUM 3 /* exec/shell NAME COMMAND */ |
| #define USESHELLMIB |
| |
| #define MEMMIBNUM 4 /* swap MIN */ |
| #ifdef hpux9 |
| #define USEMEMMIB |
| #endif |
| |
| #define DISKMIBNUM 6 /* disk DISK MINSIZE */ |
| #define USEDISKMIB |
| |
| #define LOADAVEMIBNUM 7 /* load 1 5 15 */ |
| #define USELOADAVEMIB |
| |
| #define VERSIONMIBNUM 100 /* which version are you using? */ |
| #define USEVERSIONMIB /* This mibloc will tell you */ |
| |
| #define ERRORMIBNUM 101 /* Reports errors the agent runs into */ |
| #define USEERRORMIB /* (typically its "can't fork, no mem" problems) */ |
| |
| #define AGENTID 250 /* The sub id of EXENSIBLEMIB returned to queries of |
| .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0 */ |
| |
| /* This ID is returned after the AGENTID above. IE, the resulting |
| value returned by a query to sysObjectID is |
| EXTENSIBLEMIB.AGENTID.???, where ??? is defined below by OSTYPE */ |
| |
| #define HPUX9ID 1 |
| #define SUNOS4ID 2 |
| #define SOLARISID 3 |
| #define OSF3ID 4 |
| #define ULTRIXID 5 |
| #define HPUX10ID 6 |
| #define NETBSD1ID 7 |
| #define UNKNOWNID 255 |
| |
| #ifdef hpux9 |
| #define OSTYPE HPUX9ID |
| #endif |
| #ifdef hpux10 |
| #define OSTYPE HPUX10ID |
| #endif |
| #ifdef sunos4 |
| #define OSTYPE SUNOS4ID |
| #endif |
| #ifdef solaris2 |
| #define OSTYPE SOLARISID |
| #endif |
| #ifdef osf3 |
| #define OSTYPE OSF3ID |
| #endif |
| #ifdef ultrix4 |
| #define OSTYPE ULTRIXID |
| #endif |
| #ifdef netbsd1 |
| #define OSTYPE NETBSD1ID |
| #endif |
| /* unknown */ |
| #ifndef OSTYPE |
| #define OSTYPE UNKNOWNID |
| #endif |
| |
| /* how long to wait (seconds) for error querys before reseting the error trap.*/ |
| #define ERRORTIMELENGTH 600 |
| |
| /* Exec command to fix PROC problems */ |
| /* %s will be replaced by the process name in error */ |
| |
| #define PROCFIXCMD "/usr/local/bin/perl /local/scripts/fixproc %s" |
| |
| /* Exec command to fix EXEC problems */ |
| /* %s will be replaced by the exec/script name in error */ |
| |
| #define EXECFIXCMD "/usr/local/bin/perl /local/scripts/fixproc %s" |
| |
| /* Should exec output Cashing be used (speeds up things greatly), and |
| if so, After how many seconds should the cache re-newed? Note: |
| Don't define CASHETIME to disable cashing completely */ |
| |
| #define EXCACHETIME 30 |
| #define CACHEFILE "/tmp/.snmp-exec-cache" |
| #define MAXCACHESIZE (200*80) /* roughly 200 lines max */ |
| |
| #define MAXDISKS 10 /* can't scan more than this number */ |
| |
| /* misc defaults */ |
| |
| #define DEFDISKMINIMUMSPACE 100000 /* default of 100 meg minimum |
| if the minimum size is not |
| specified in the config file */ |
| |
| #define DEFMAXLOADAVE 12.0 /* default maximum load average before error */ |
| |
| #define MAXREADCOUNT 20 /* max times to loop reading output from |
| execs. Because of sleep(1)s, this will also |
| be time to wait (in seconds) for exec to finish */ |
| |
| #define SNMPBLOCK 0 /* Set to 1 if you want snmpgets to block and never |
| timeout. Original CMU code had this |
| hardcoded into the code as = 1 */ |
| |
| #define RESTARTSLEEP 5 /* How long to wait after a snmpset to |
| EXTENSIBLEMIB.VERSIONMIBNUM.VERRESTARTAGENT |
| before restarting the agent. This is |
| necessary to finish the snmpset reply |
| before restarting. */ |
| |
| #define NUM_COMMUNITIES 5 /* Number of community strings to store */ |
| |
| /* #define EXIT_ON_BAD_KLREAD */ |
| /* define to exit the agent on a bad kernel read */ |
| |
| #define LASTFIELD -1 /* internal define */ |
| |
| /* debugging macros */ |
| |
| #ifdef DODEBUG |
| #define DEBUGP(x) fprintf(stderr,x); |
| #define DEBUGP1(x,y) fprintf(stderr,x,y); |
| #else |
| #define DEBUGP(x) |
| #define DEBUGP1(x,y) |
| #endif |
| |
| #ifndef DONT_INC_STRUCTS |
| #include "agent/extensible/struct.h" |
| #endif |
| |
