| SNMP-COMMUNITY-MIB DEFINITIONS ::= BEGIN |
| |
| IMPORTS |
| IpAddress, |
| MODULE-IDENTITY, |
| OBJECT-TYPE, |
| Integer32, |
| snmpModules |
| FROM SNMPv2-SMI |
| RowStatus, |
| StorageType |
| FROM SNMPv2-TC |
| SnmpAdminString, |
| SnmpEngineID |
| FROM SNMP-FRAMEWORK-MIB |
| SnmpTagValue, |
| snmpTargetAddrEntry |
| FROM SNMP-TARGET-MIB |
| MODULE-COMPLIANCE, |
| OBJECT-GROUP |
| FROM SNMPv2-CONF; |
| |
| snmpCommunityMIB MODULE-IDENTITY |
| LAST-UPDATED "200003060000Z" -- 6 Mar 2000, midnight |
| ORGANIZATION "SNMPv3 Working Group" |
| CONTACT-INFO "WG-email: snmpv3@lists.tislabs.com |
| Subscribe: majordomo@lists.tislabs.com |
| In msg body: subscribe snmpv3 |
| |
| Chair: Russ Mundy |
| TIS Labs at Network Associates |
| Postal: 3060 Washington Rd |
| Glenwood MD 21738 |
| USA |
| Email: mundy@tislabs.com |
| Phone: +1-301-854-6889 |
| |
| Co-editor: Rob Frye |
| CoSine Communications |
| Postal: 1200 Bridge Parkway |
| Redwood City, CA 94065 |
| USA |
| E-mail: rfrye@cosinecom.com |
| Phone: +1 703 725 1130 |
| |
| Co-editor: David B. Levi |
| Nortel Networks |
| Postal: 3505 Kesterwood Drive |
| Knoxville, TN 37918 |
| E-mail: dlevi@nortelnetworks.com |
| Phone: +1 423 686 0432 |
| |
| Co-editor: Shawn A. Routhier |
| Integrated Systems Inc. |
| Postal: 333 North Ave 4th Floor |
| Wakefield, MA 01880 |
| E-mail: sar@epilogue.com |
| Phone: +1 781 245 0804 |
| |
| Co-editor: Bert Wijnen |
| Lucent Technologies |
| Postal: Schagen 33 |
| 3461 GL Linschoten |
| Netherlands |
| Email: bwijnen@lucent.com |
| Phone: +31-348-407-775 |
| " |
| DESCRIPTION |
| "This MIB module defines objects to help support coexistence |
| between SNMPv1, SNMPv2c, and SNMPv3." |
| REVISION "200003060000Z" -- 6 Mar 2000 |
| DESCRIPTION "This version published as RFC 2576." |
| REVISION "199905130000Z" -- 13 May 1999 |
| DESCRIPTION "The Initial Revision" |
| ::= { snmpModules 18 } |
| |
| -- Administrative assignments **************************************** |
| |
| snmpCommunityMIBObjects OBJECT IDENTIFIER ::= { snmpCommunityMIB 1 } |
| snmpCommunityMIBConformance OBJECT IDENTIFIER ::= { snmpCommunityMIB 2 } |
| |
| -- |
| -- The snmpCommunityTable contains a database of community strings. |
| -- This table provides mappings between community strings, and the |
| |
| -- parameters required for View-based Access Control. |
| -- |
| |
| snmpCommunityTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SnmpCommunityEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "The table of community strings configured in the SNMP |
| engine's Local Configuration Datastore (LCD)." |
| ::= { snmpCommunityMIBObjects 1 } |
| |
| snmpCommunityEntry OBJECT-TYPE |
| SYNTAX SnmpCommunityEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Information about a particular community string." |
| INDEX { IMPLIED snmpCommunityIndex } |
| ::= { snmpCommunityTable 1 } |
| |
| SnmpCommunityEntry ::= SEQUENCE { |
| snmpCommunityIndex SnmpAdminString, |
| snmpCommunityName OCTET STRING, |
| snmpCommunitySecurityName SnmpAdminString, |
| snmpCommunityContextEngineID SnmpEngineID, |
| snmpCommunityContextName SnmpAdminString, |
| snmpCommunityTransportTag SnmpTagValue, |
| snmpCommunityStorageType StorageType, |
| snmpCommunityStatus RowStatus |
| } |
| |
| snmpCommunityIndex OBJECT-TYPE |
| SYNTAX SnmpAdminString (SIZE(1..32)) |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "The unique index value of a row in this table." |
| ::= { snmpCommunityEntry 1 } |
| |
| snmpCommunityName OBJECT-TYPE |
| SYNTAX OCTET STRING |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The community string for which a row in this table |
| represents a configuration." |
| ::= { snmpCommunityEntry 2 } |
| |
| snmpCommunitySecurityName OBJECT-TYPE |
| SYNTAX SnmpAdminString (SIZE(1..32)) |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "A human readable string representing the corresponding |
| value of snmpCommunityName in a Security Model |
| independent format." |
| ::= { snmpCommunityEntry 3 } |
| |
| snmpCommunityContextEngineID OBJECT-TYPE |
| SYNTAX SnmpEngineID |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The contextEngineID indicating the location of the |
| context in which management information is accessed |
| when using the community string specified by the |
| corresponding instance of snmpCommunityName. |
| |
| The default value is the snmpEngineID of the entity in |
| which this object is instantiated." |
| ::= { snmpCommunityEntry 4 } |
| |
| snmpCommunityContextName OBJECT-TYPE |
| SYNTAX SnmpAdminString (SIZE(0..32)) |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The context in which management information is accessed |
| when using the community string specified by the corresponding |
| instance of snmpCommunityName." |
| DEFVAL { ''H } -- the empty string |
| ::= { snmpCommunityEntry 5 } |
| |
| snmpCommunityTransportTag OBJECT-TYPE |
| SYNTAX SnmpTagValue |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "This object specifies a set of transport endpoints |
| from which a command responder application will accept |
| management requests. If a management request containing |
| this community is received on a transport endpoint other |
| than the transport endpoints identified by this object, |
| the request is deemed unauthentic. |
| |
| The transports identified by this object are specified |
| |
| in the snmpTargetAddrTable. Entries in that table |
| whose snmpTargetAddrTagList contains this tag value |
| are identified. |
| |
| If the value of this object has zero-length, transport |
| endpoints are not checked when authenticating messages |
| containing this community string." |
| DEFVAL { ''H } -- the empty string |
| ::= { snmpCommunityEntry 6 } |
| |
| snmpCommunityStorageType OBJECT-TYPE |
| SYNTAX StorageType |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The storage type for this conceptual row in the |
| snmpCommunityTable. Conceptual rows having the value |
| 'permanent' need not allow write-access to any |
| columnar object in the row." |
| ::= { snmpCommunityEntry 7 } |
| |
| snmpCommunityStatus OBJECT-TYPE |
| SYNTAX RowStatus |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The status of this conceptual row in the snmpCommunityTable. |
| |
| An entry in this table is not qualified for activation |
| until instances of all corresponding columns have been |
| initialized, either through default values, or through |
| Set operations. The snmpCommunityName and |
| snmpCommunitySecurityName objects must be explicitly set. |
| |
| There is no restriction on setting columns in this table |
| when the value of snmpCommunityStatus is active(1)." |
| ::= { snmpCommunityEntry 8 } |
| |
| -- |
| -- The snmpTargetAddrExtTable |
| -- |
| |
| snmpTargetAddrExtTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF SnmpTargetAddrExtEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "The table of mask and mms values associated with the |
| |
| snmpTargetAddrTable. |
| |
| The snmpTargetAddrExtTable augments the |
| snmpTargetAddrTable with a transport address mask value |
| and a maximum message size value. The transport address |
| mask allows entries in the snmpTargetAddrTable to define |
| a set of addresses instead of just a single address. |
| The maximum message size value allows the maximum |
| message size of another SNMP entity to be configured for |
| use in SNMPv1 (and SNMPv2c) transactions, where the |
| message format does not specify a maximum message size." |
| ::= { snmpCommunityMIBObjects 2 } |
| |
| snmpTargetAddrExtEntry OBJECT-TYPE |
| SYNTAX SnmpTargetAddrExtEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION |
| "Information about a particular mask and mms value." |
| AUGMENTS { snmpTargetAddrEntry } |
| ::= { snmpTargetAddrExtTable 1 } |
| |
| SnmpTargetAddrExtEntry ::= SEQUENCE { |
| snmpTargetAddrTMask OCTET STRING, |
| snmpTargetAddrMMS Integer32 |
| } |
| |
| snmpTargetAddrTMask OBJECT-TYPE |
| SYNTAX OCTET STRING (SIZE (0..255)) |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The mask value associated with an entry in the |
| snmpTargetAddrTable. The value of this object must |
| have the same length as the corresponding instance of |
| snmpTargetAddrTAddress, or must have length 0. An |
| attempt to set it to any other value will result in |
| an inconsistentValue error. |
| |
| The value of this object allows an entry in the |
| snmpTargetAddrTable to specify multiple addresses. |
| The mask value is used to select which bits of |
| a transport address must match bits of the corresponding |
| instance of snmpTargetAddrTAddress, in order for the |
| transport address to match a particular entry in the |
| snmpTargetAddrTable. Bits which are 1 in the mask |
| value indicate bits in the transport address which |
| must match bits in the snmpTargetAddrTAddress value. |
| |
| Bits which are 0 in the mask indicate bits in the |
| transport address which need not match. If the |
| length of the mask is 0, the mask should be treated |
| as if all its bits were 1 and its length were equal |
| to the length of the corresponding value of |
| snmpTargetAddrTable. |
| |
| This object may not be modified while the value of the |
| corresponding instance of snmpTargetAddrRowStatus is |
| active(1). An attempt to set this object in this case |
| will result in an inconsistentValue error." |
| DEFVAL { ''H } |
| ::= { snmpTargetAddrExtEntry 1 } |
| |
| snmpTargetAddrMMS OBJECT-TYPE |
| SYNTAX Integer32 (0|484..2147483647) |
| MAX-ACCESS read-create |
| STATUS current |
| DESCRIPTION |
| "The maximum message size value associated with an entry |
| in the snmpTargetAddrTable." |
| DEFVAL { 484 } |
| ::= { snmpTargetAddrExtEntry 2 } |
| |
| -- |
| -- The snmpTrapAddress and snmpTrapCommunity objects are included |
| -- in notifications that are forwarded by a proxy, which were |
| -- originally received as SNMPv1 Trap messages. |
| -- |
| |
| snmpTrapAddress OBJECT-TYPE |
| SYNTAX IpAddress |
| MAX-ACCESS accessible-for-notify |
| STATUS current |
| DESCRIPTION |
| "The value of the agent-addr field of a Trap PDU which |
| is forwarded by a proxy forwarder application using |
| an SNMP version other than SNMPv1. The value of this |
| object SHOULD contain the value of the agent-addr field |
| from the original Trap PDU as generated by an SNMPv1 |
| agent." |
| ::= { snmpCommunityMIBObjects 3 } |
| |
| snmpTrapCommunity OBJECT-TYPE |
| SYNTAX OCTET STRING |
| MAX-ACCESS accessible-for-notify |
| STATUS current |
| DESCRIPTION |
| "The value of the community string field of an SNMPv1 |
| message containing a Trap PDU which is forwarded by a |
| a proxy forwarder application using an SNMP version |
| other than SNMPv1. The value of this object SHOULD |
| contain the value of the community string field from |
| the original SNMPv1 message containing a Trap PDU as |
| generated by an SNMPv1 agent." |
| ::= { snmpCommunityMIBObjects 4 } |
| |
| -- Conformance Information ******************************************* |
| |
| snmpCommunityMIBCompliances OBJECT IDENTIFIER |
| ::= { snmpCommunityMIBConformance 1 } |
| snmpCommunityMIBGroups OBJECT IDENTIFIER |
| ::= { snmpCommunityMIBConformance 2 } |
| |
| -- Compliance statements |
| |
| snmpCommunityMIBCompliance MODULE-COMPLIANCE |
| STATUS current |
| DESCRIPTION |
| "The compliance statement for SNMP engines which |
| implement the SNMP-COMMUNITY-MIB." |
| |
| MODULE -- this module |
| MANDATORY-GROUPS { snmpCommunityGroup } |
| |
| OBJECT snmpCommunityName |
| MIN-ACCESS read-only |
| DESCRIPTION "Write access is not required." |
| |
| OBJECT snmpCommunitySecurityName |
| MIN-ACCESS read-only |
| DESCRIPTION "Write access is not required." |
| |
| OBJECT snmpCommunityContextEngineID |
| MIN-ACCESS read-only |
| DESCRIPTION "Write access is not required." |
| |
| OBJECT snmpCommunityContextName |
| MIN-ACCESS read-only |
| DESCRIPTION "Write access is not required." |
| |
| OBJECT snmpCommunityTransportTag |
| MIN-ACCESS read-only |
| DESCRIPTION "Write access is not required." |
| |
| OBJECT snmpCommunityStorageType |
| MIN-ACCESS read-only |
| DESCRIPTION "Write access is not required." |
| |
| OBJECT snmpCommunityStatus |
| MIN-ACCESS read-only |
| DESCRIPTION "Write access is not required." |
| ::= { snmpCommunityMIBCompliances 1 } |
| |
| snmpProxyTrapForwardCompliance MODULE-COMPLIANCE |
| STATUS current |
| DESCRIPTION |
| "The compliance statement for SNMP engines which |
| contain a proxy forwarding application which is |
| capable of forwarding SNMPv1 traps using SNMPv2c |
| or SNMPv3." |
| MODULE -- this module |
| MANDATORY-GROUPS { snmpProxyTrapForwardGroup } |
| ::= { snmpCommunityMIBCompliances 2 } |
| |
| snmpCommunityGroup OBJECT-GROUP |
| OBJECTS { |
| snmpCommunityName, |
| snmpCommunitySecurityName, |
| snmpCommunityContextEngineID, |
| snmpCommunityContextName, |
| snmpCommunityTransportTag, |
| snmpCommunityStorageType, |
| snmpCommunityStatus, |
| snmpTargetAddrTMask, |
| snmpTargetAddrMMS |
| } |
| STATUS current |
| DESCRIPTION |
| "A collection of objects providing for configuration |
| of community strings for SNMPv1 (and SNMPv2c) usage." |
| ::= { snmpCommunityMIBGroups 1 } |
| |
| snmpProxyTrapForwardGroup OBJECT-GROUP |
| OBJECTS { |
| snmpTrapAddress, |
| snmpTrapCommunity |
| } |
| STATUS current |
| DESCRIPTION |
| "Objects which are used by proxy forwarding applications |
| when translating traps between SNMP versions. These are |
| used to preserve SNMPv1-specific information when |
| |
| translating to SNMPv2c or SNMPv3." |
| ::= { snmpCommunityMIBGroups 3 } |
| |
| END |
