| /* config.h: a general config file */ |
| |
| /* Define IN_UCD_SNMP_SOURCE if compiling inside the ucd-snmp source tree */ |
| #define IN_UCD_SNMP_SOURCE 1 |
| |
| /* don't change these values! */ |
| #define SNMPV1 0xAAAA /* readable by anyone */ |
| #define SNMPV2ANY 0xA000 /* V2 Any type (includes NoAuth) */ |
| #define SNMPV2AUTH 0x8000 /* V2 Authenticated requests only */ |
| |
| /* default list of mibs to load */ |
| |
| #define DEFAULT_MIBS "IP-MIB:IF-MIB:TCP-MIB:UDP-MIB:SNMPv2-MIB:RFC1213-MIB" |
| |
| /* default location to look for mibs to load using the above tokens |
| and/or those in the MIBS envrionment variable*/ |
| |
| #undef DEFAULT_MIBDIRS |
| |
| /* default mib files to load, specified by path. */ |
| |
| #undef DEFAULT_MIBFILES |
| |
| /* should we compile to use special opaque types: float, double, |
| counter64, i64, ui64, union? */ |
| #undef OPAQUE_SPECIAL_TYPES |
| |
| /* comment the next line if you are compiling with libsnmp.h |
| and are not using the UC-Davis SNMP library. */ |
| #define UCD_SNMP_LIBRARY 1 |
| |
| /* define if you want to compile support for both authentication and |
| privacy support. */ |
| #undef SCAPI_AUTHPRIV |
| |
| /* define if you are using the MD5 code ...*/ |
| #undef USE_INTERNAL_MD5 |
| |
| /* ... or define this if you're using openssl support */ |
| #undef USE_OPENSSL |
| |
| /* add in recent CMU library extensions (not complete) */ |
| #undef CMU_COMPATIBLE |
| |
| /* add in recent resource lock functions (not complete) */ |
| #undef _REENTRANT |
| |
| /* debugging stuff */ |
| #undef SNMP_NO_DEBUGGING /* if defined, we optimize the code |
| to exclude all debugging calls. */ |
| #define SNMP_ALWAYS_DEBUG 0 /* Always print debugging information and |
| ignore the -D flag passed to the cmds */ |
| |
| /* reverse encoding BER packets is both faster and more efficient in space. */ |
| #define USE_REVERSE_ASNENCODING 1 |
| #define DEFAULT_ASNENCODING_DIRECTION 1 /* 1 = reverse, 0 = forwards */ |
| |
| /* PERSISTENT_DIRECTORY: If defined, the library is capabile of saving |
| persisant information to this directory in the form of configuration |
| lines: PERSISTENT_DIRECTORY/NAME.persistent.conf */ |
| #define PERSISTENT_DIRECTORY "/var/snmp" |
| |
| /* PERSISTENT_MASK: the umask permissions to set up the persistent files with */ |
| #define PERSISTENT_MASK 077 |
| |
| /* AGENT_DIRECTORY_MODE: the mode the agents should use to create |
| directories with. Since the data stored here is probably sensitive, it |
| probably should be read-only by root/administrator. */ |
| #define AGENT_DIRECTORY_MODE 0700 |
| |
| /* MAX_PERSISTENT_BACKUPS: |
| * The maximum number of persistent backups the library will try to |
| * read from the persistent cache directory. If an application fails to |
| * close down successfully more than this number of times, data will be lost. |
| */ |
| #define MAX_PERSISTENT_BACKUPS 10 |
| |
| @TOP@ |
| |
| /* define the system type include file here */ |
| #define SYSTEM_INCLUDE_FILE "s/generic.h" |
| |
| /* define the machine (cpu) type include file here */ |
| #define MACHINE_INCLUDE_FILE "m/generic.h" |
| |
| /* SNMPLIBDIR contains important files */ |
| |
| #undef SNMPLIBPATH |
| #undef SNMPSHAREPATH |
| #undef SNMPCONFPATH |
| #undef SNMPDLMODPATH |
| |
| /* LOGFILE: If defined it closes stdout/err/in and opens this in out/err's |
| place. (stdin is closed so that sh scripts won't wait for it) */ |
| |
| #undef LOGFILE |
| |
| /* default system contact */ |
| #undef SYS_CONTACT |
| |
| /* system location */ |
| #undef SYS_LOC |
| |
| /* Use libwrap to handle allow/deny hosts? */ |
| #undef USE_LIBWRAP |
| |
| /* Use dmalloc to do malloc debugging? */ |
| #undef HAVE_DMALLOC_H |
| |
| /* location of UNIX kernel */ |
| #define KERNEL_LOC "/vmunix" |
| |
| /* location of mount table list */ |
| #define ETC_MNTTAB "/etc/mnttab" |
| |
| /* location of swap device (ok if not found) */ |
| #undef DMEM_LOC |
| |
| /* Command to generate ps output, the final column must be the process |
| name withOUT arguments */ |
| |
| #define PSCMD "/bin/ps" |
| |
| /* Where is the uname command */ |
| #define UNAMEPROG "/bin/uname" |
| |
| /* testing code sections. */ |
| #undef SNMP_TESTING_CODE |
| |
| /* If you don't have root access don't exit upon kmem errors */ |
| #undef NO_ROOT_ACCESS |
| |
| /* If you don't want the agent to report on variables it doesn't have data for */ |
| #undef NO_DUMMY_VALUES |
| |
| /* Define if statfs takes 2 args and the second argument has |
| type struct fs_data. [Ultrix] */ |
| #undef STAT_STATFS_FS_DATA |
| |
| /* Define if the TCP timer constants in <netinet/tcp_timer.h> |
| depend on the integer variable `hz'. [FreeBSD 4.x] */ |
| #undef TCPTV_NEEDS_HZ |
| |
| @BOTTOM@ |
| |
| /* define if you have <netinet/in_pcb.h> */ |
| #undef HAVE_NETINET_IN_PCB_H |
| |
| /* define if you are using linux and /proc/net/dev has the compressed |
| field, which exists in linux kernels 2.2 and greater. */ |
| #undef PROC_NET_DEV_HAS_COMPRESSED |
| |
| /* define rtentry to ortentry on SYSV machines (alphas) */ |
| #undef RTENTRY |
| |
| /* Use BSD 4.4 routing table entries? */ |
| #undef RTENTRY_4_4 |
| |
| /* Does struct sigaction have a sa_sigaction field? */ |
| #undef STRUCT_SIGACTION_HAS_SA_SIGACTION |
| |
| /* Does struct sockaddr have a sa_len field? */ |
| #undef STRUCT_SOCKADDR_HAS_SA_LEN |
| |
| /* Does struct sockaddr have a sa_family2 field? */ |
| #undef STRUCT_SOCKADDR_HAS_SA_UNION_SA_GENERIC_SA_FAMILY2 |
| |
| /* rtentry structure tests */ |
| #undef RTENTRY_RT_NEXT |
| #undef STRUCT_RTENTRY_HAS_RT_DST |
| #undef STRUCT_RTENTRY_HAS_RT_UNIT |
| #undef STRUCT_RTENTRY_HAS_RT_USE |
| #undef STRUCT_RTENTRY_HAS_RT_REFCNT |
| #undef STRUCT_RTENTRY_HAS_RT_HASH |
| |
| /* ifnet structure tests */ |
| #undef STRUCT_IFNET_HAS_IF_BAUDRATE |
| #undef STRUCT_IFNET_HAS_IF_BAUDRATE_IFS_VALUE |
| #undef STRUCT_IFNET_HAS_IF_SPEED |
| #undef STRUCT_IFNET_HAS_IF_TYPE |
| #undef STRUCT_IFNET_HAS_IF_IMCASTS |
| #undef STRUCT_IFNET_HAS_IF_IQDROPS |
| #undef STRUCT_IFNET_HAS_IF_LASTCHANGE_TV_SEC |
| #undef STRUCT_IFNET_HAS_IF_NOPROTO |
| #undef STRUCT_IFNET_HAS_IF_OMCASTS |
| #undef STRUCT_IFNET_HAS_IF_XNAME |
| #undef STRUCT_IFNET_HAS_IF_OBYTES |
| #undef STRUCT_IFNET_HAS_IF_IBYTES |
| #undef STRUCT_IFNET_HAS_IF_ADDRLIST |
| |
| /* tcpstat.tcps_rcvmemdrop */ |
| #undef STRUCT_TCPSTAT_HAS_TCPS_RCVMEMDROP |
| |
| /* udpstat.udps_discard */ |
| #undef STRUCT_UDPSTAT_HAS_UDPS_DISCARD |
| |
| /* udpstat.udps_discard */ |
| #undef STRUCT_UDPSTAT_HAS_UDPS_NOPORT |
| |
| /* udpstat.udps_discard */ |
| #undef STRUCT_UDPSTAT_HAS_UDPS_NOPORTBCAST |
| |
| /* udpstat.udps_discard */ |
| #undef STRUCT_UDPSTAT_HAS_UDPS_FULLSOCK |
| |
| /* arphd.at_next */ |
| #undef STRUCT_ARPHD_HAS_AT_NEXT |
| |
| /* ifaddr.ifa_next */ |
| #undef STRUCT_IFADDR_HAS_IFA_NEXT |
| |
| /* ifnet.if_mtu */ |
| #undef STRUCT_IFNET_HAS_IF_MTU |
| |
| /* swdevt.sw_nblksenabled */ |
| #undef STRUCT_SWDEVT_HAS_SW_NBLKSENABLED |
| |
| /* nlist.n_value */ |
| #undef STRUCT_NLIST_HAS_N_VALUE |
| |
| /* ipstat structure tests */ |
| #undef STRUCT_IPSTAT_HAS_IPS_CANTFORWARD |
| #undef STRUCT_IPSTAT_HAS_IPS_CANTFRAG |
| #undef STRUCT_IPSTAT_HAS_IPS_DELIVERED |
| #undef STRUCT_IPSTAT_HAS_IPS_FRAGDROPPED |
| #undef STRUCT_IPSTAT_HAS_IPS_FRAGTIMEOUT |
| #undef STRUCT_IPSTAT_HAS_IPS_LOCALOUT |
| #undef STRUCT_IPSTAT_HAS_IPS_NOPROTO |
| #undef STRUCT_IPSTAT_HAS_IPS_NOROUTE |
| #undef STRUCT_IPSTAT_HAS_IPS_ODROPPED |
| #undef STRUCT_IPSTAT_HAS_IPS_OFRAGMENTS |
| #undef STRUCT_IPSTAT_HAS_IPS_REASSEMBLED |
| |
| /* vfsstat.f_frsize */ |
| #undef STRUCT_STATVFS_HAS_F_FRSIZE |
| |
| /* vfsstat.f_files */ |
| #undef STRUCT_STATVFS_HAS_F_FILES |
| |
| /* ifnet needs to have _KERNEL defined */ |
| #undef IFNET_NEEDS_KERNEL |
| |
| /* sysctl works to get boottime, etc... */ |
| #undef CAN_USE_SYSCTL |
| |
| /* type check for in_addr_t */ |
| #undef in_addr_t |
| |
| /* define if SIOCGIFADDR exists in sys/ioctl.h */ |
| #undef SYS_IOCTL_H_HAS_SIOCGIFADDR |
| |
| /* define if your compiler (processor) defines __FUNCTION__ for you */ |
| #undef HAVE_CPP_UNDERBAR_FUNCTION_DEFINED |
| |
| /* Mib-2 tree Info */ |
| /* These are the system information variables. */ |
| |
| #define VERS_DESC "unknown" /* overridden at run time */ |
| #define SYS_NAME "unknown" /* overridden at run time */ |
| |
| /* comment out the second define to turn off functionality for any of |
| these: (See README for details) */ |
| |
| /* proc PROCESSNAME [MAX] [MIN] */ |
| #define PROCMIBNUM 2 |
| |
| /* exec/shell NAME COMMAND */ |
| #define SHELLMIBNUM 8 |
| |
| /* swap MIN */ |
| #define MEMMIBNUM 4 |
| |
| /* disk DISK MINSIZE */ |
| #define DISKMIBNUM 9 |
| |
| /* load 1 5 15 */ |
| #define LOADAVEMIBNUM 10 |
| |
| /* which version are you using? This mibloc will tell you */ |
| #define VERSIONMIBNUM 100 |
| |
| /* Reports errors the agent runs into */ |
| /* (typically its "can't fork, no mem" problems) */ |
| #define ERRORMIBNUM 101 |
| |
| /* The sub id of EXENSIBLEMIB returned to queries of |
| .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0 */ |
| #define AGENTID 250 |
| |
| /* This ID is returned after the AGENTID above. IE, the resulting |
| value returned by a query to sysObjectID is |
| EXTENSIBLEMIB.AGENTID.???, where ??? is defined below by OSTYPE */ |
| |
| #define HPUX9ID 1 |
| #define SUNOS4ID 2 |
| #define SOLARISID 3 |
| #define OSFID 4 |
| #define ULTRIXID 5 |
| #define HPUX10ID 6 |
| #define NETBSD1ID 7 |
| #define FREEBSDID 8 |
| #define IRIXID 9 |
| #define LINUXID 10 |
| #define BSDIID 11 |
| #define OPENBSDID 12 |
| #define UNKNOWNID 255 |
| |
| #ifdef hpux9 |
| #define OSTYPE HPUX9ID |
| #endif |
| #ifdef hpux10 |
| #define OSTYPE HPUX10ID |
| #endif |
| #ifdef sunos4 |
| #define OSTYPE SUNOS4ID |
| #endif |
| #ifdef solaris2 |
| #define OSTYPE SOLARISID |
| #endif |
| #if defined(osf3) || defined(osf4) |
| #define OSTYPE OSFID |
| #endif |
| #ifdef ultrix4 |
| #define OSTYPE ULTRIXID |
| #endif |
| #ifdef netbsd1 |
| #define OSTYPE NETBSD1ID |
| #endif |
| #ifdef freebsd2 |
| #define OSTYPE FREEBSDID |
| #endif |
| #if defined(irix6) || defined(irix5) |
| #define OSTYPE IRIXID |
| #endif |
| #ifdef linux |
| #define OSTYPE LINUXID |
| #endif |
| #if defined(bsdi2) || defined(bsdi3) |
| #define OSTYPE BSDIID |
| #endif |
| #ifdef openbsd2 |
| #define OSTYPE OPENBSDID |
| #endif |
| /* unknown */ |
| #ifndef OSTYPE |
| #define OSTYPE UNKNOWNID |
| #endif |
| |
| /* The enterprise number has been assigned by the IANA group. */ |
| /* Optionally, this may point to the location in the tree your */ |
| /* company/organization has been allocated. */ |
| /* The assigned enterprise number for the NET_SNMP MIB modules. */ |
| #define ENTERPRISE_OID 8072 |
| #define ENTERPRISE_MIB 1,3,6,1,4,1,8072 |
| #define ENTERPRISE_DOT_MIB 1.3.6.1.4.1.8072 |
| #define ENTERPRISE_DOT_MIB_LENGTH 7 |
| |
| /* The assigned enterprise number for sysObjectID. */ |
| #define SYSTEM_MIB 1,3,6,1,4,1,2021,AGENTID,OSTYPE |
| #define SYSTEM_DOT_MIB 1.3.6.1.4.1.2021.AGENTID.OSTYPE |
| #define SYSTEM_DOT_MIB_LENGTH 9 |
| |
| /* The assigned enterprise number for notifications. */ |
| #define NOTIFICATION_MIB 1,3,6,1,4,1,2021,251 |
| #define NOTIFICATION_DOT_MIB 1.3.6.1.4.1.2021.251 |
| #define NOTIFICATION_DOT_MIB_LENGTH 8 |
| |
| /* this is the location of the ucdavis mib tree. It shouldn't be |
| changed, as the places it is used are expected to be constant |
| values or are directly tied to the UCD-SNMP-MIB. */ |
| #define UCDAVIS_OID 2021 |
| #define UCDAVIS_MIB 1,3,6,1,4,1,2021 |
| #define UCDAVIS_DOT_MIB 1.3.6.1.4.1.2021 |
| #define UCDAVIS_DOT_MIB_LENGTH 7 |
| |
| /* how long to wait (seconds) for error querys before reseting the error trap.*/ |
| #define ERRORTIMELENGTH 600 |
| |
| /* Exec command to fix PROC problems */ |
| /* %s will be replaced by the process name in error */ |
| |
| /* #define PROCFIXCMD "/usr/bin/perl /local/scripts/fixproc %s" */ |
| |
| /* Exec command to fix EXEC problems */ |
| /* %s will be replaced by the exec/script name in error */ |
| |
| /* #define EXECFIXCMD "/usr/bin/perl /local/scripts/fixproc %s" */ |
| |
| /* Should exec output Cashing be used (speeds up things greatly), and |
| if so, After how many seconds should the cache re-newed? Note: |
| Don't define CASHETIME to disable cashing completely */ |
| |
| #define EXCACHETIME 30 |
| #define CACHEFILE ".snmp-exec-cache" |
| #define MAXCACHESIZE (200*80) /* roughly 200 lines max */ |
| |
| #define MAXDISKS 50 /* can't scan more than this number */ |
| |
| /* misc defaults */ |
| |
| /* default of 100 meg minimum if the minimum size is not specified in |
| the config file */ |
| #define DEFDISKMINIMUMSPACE 100000 |
| |
| #define DEFMAXLOADAVE 12.0 /* default maximum load average before error */ |
| |
| #define MAXREADCOUNT 100 /* max times to loop reading output from |
| execs. Because of sleep(1)s, this will also |
| be time to wait (in seconds) for exec to finish */ |
| |
| #define SNMPBLOCK 1 /* Set to 1 if you want snmpgets to block and never |
| timeout. Original CMU code had this |
| hardcoded into the code as = 1 */ |
| |
| #define RESTARTSLEEP 5 /* How long to wait after a snmpset to |
| EXTENSIBLEMIB.VERSIONMIBNUM.VERRESTARTAGENT |
| before restarting the agent. This is |
| necessary to finish the snmpset reply |
| before restarting. */ |
| |
| /* Number of community strings to store */ |
| #define NUM_COMMUNITIES 5 |
| |
| /* UNdefine to allow specifying zero-length community string */ |
| /* #define NO_ZEROLENGTH_COMMUNITY 1 */ |
| |
| /* #define EXIT_ON_BAD_KLREAD */ |
| /* define to exit the agent on a bad kernel read */ |
| |
| #define LASTFIELD -1 /* internal define */ |
| |
| /* configure options specified */ |
| #define CONFIGURE_OPTIONS "" |
| |
| #ifndef HAVE_STRCHR |
| #ifdef HAVE_INDEX |
| # define strchr index |
| # define strrchr rindex |
| #endif |
| #endif |
| |
| #ifndef HAVE_INDEX |
| #ifdef HAVE_STRCHR |
| # define index strchr |
| # define rindex strrchr |
| #endif |
| #endif |
| |
| #ifndef HAVE_MEMCPY |
| #ifdef HAVE_BCOPY |
| # define memcpy(d, s, n) bcopy ((s), (d), (n)) |
| # define memmove(d, s, n) bcopy ((s), (d), (n)) |
| # define memcmp bcmp |
| #endif |
| #endif |
| |
| #ifndef HAVE_MEMMOVE |
| #ifdef HAVE_MEMCPY |
| # define memmove memcpy |
| #endif |
| #endif |
| |
| #ifndef HAVE_BCOPY |
| #ifdef HAVE_MEMCPY |
| # define bcopy(s, d, n) memcpy ((d), (s), (n)) |
| # define bzero(p,n) memset((p),(0),(n)) |
| # define bcmp memcmp |
| #endif |
| #endif |
| |
| |
| /* define random functions */ |
| |
| #ifndef HAVE_RANDOM |
| #ifdef HAVE_LRAND48 |
| #define random lrand48 |
| #define srandom(s) srand48(s) |
| #else |
| #ifdef HAVE_RAND |
| #define random rand |
| #define srandom(s) srand(s) |
| #endif |
| #endif |
| #endif |
| |
| /* define signal if DNE */ |
| |
| #ifndef HAVE_SIGNAL |
| #ifdef HAVE_SIGSET |
| #define signal(a,b) sigset(a,b) |
| #endif |
| #endif |
| |
| /* define if you have librpm and libdb */ |
| #undef HAVE_LIBDB |
| #undef HAVE_LIBRPM |
| |
| /* define if you have pkginfo */ |
| #undef HAVE_PKGINFO |
| |
| /* define if you have gethostbyname */ |
| #undef HAVE_GETHOSTBYNAME |
| |
| /* define if you have getservbyname */ |
| #undef HAVE_GETSERVBYNAME |
| |
| /* printing system */ |
| #undef HAVE_LPSTAT |
| #undef LPSTAT_PATH |
| #undef HAVE_PRINTCAP |
| |
| /* Pluggable transports. */ |
| |
| /* This is defined if support for the UDP/IP transport domain is |
| available. */ |
| #undef SNMP_TRANSPORT_UDP_DOMAIN |
| |
| /* This is defined if support for the TCP/IP transport domain is |
| available. */ |
| #undef SNMP_TRANSPORT_TCP_DOMAIN |
| |
| /* This is defined if support for the Unix transport domain |
| (a.k.a. "local IPC") is available. */ |
| #undef SNMP_TRANSPORT_UNIX_DOMAIN |
| |
| /* This is defined if support for the AAL5 PVC transport domain is |
| available. */ |
| #undef SNMP_TRANSPORT_AAL5PVC_DOMAIN |
| |
| /* This is defined if support for the IPX transport domain is |
| available. */ |
| #undef SNMP_TRANSPORT_IPX_DOMAIN |
| |
| /* This is defined if support for the UDP/IPv6 transport domain is |
| available. */ |
| #undef SNMP_TRANSPORT_UDPIPV6_DOMAIN |
| |
| /* This is defined if support for the TCP/IPv6 transport domain is |
| available. */ |
| #undef SNMP_TRANSPORT_TCPIPV6_DOMAIN |
| |
| /* define this if the USM security module is available */ |
| #undef SNMP_SECMOD_USM |
| |
| /* define this if the KSM (kerberos based snmp) security module is available */ |
| #undef SNMP_SECMOD_KSM |
| |
| /* define this if we're using the new MIT crypto API */ |
| #undef MIT_NEW_CRYPTO |
| |
| /* define if you want to build with reentrant/threaded code */ |
| #undef NS_REENTRANT |
| |
| /* Not-to-be-compiled macros for use by configure only */ |
| #define config_require(x) |
| #define config_arch_require(x,y) |
| #define config_parse_dot_conf(w,x,y,z) |
| #define config_add_mib(x) |
| |
| #ifdef WIN32 |
| #define ENV_SEPARATOR ";" |
| #define ENV_SEPARATOR_CHAR ';' |
| #else |
| #define ENV_SEPARATOR ":" |
| #define ENV_SEPARATOR_CHAR ':' |
| #endif |
| |
| #include SYSTEM_INCLUDE_FILE |
| #include MACHINE_INCLUDE_FILE |
| |
| #if defined(HAVE_NLIST) && defined(STRUCT_NLIST_HAS_N_VALUE) && !defined(DONT_USE_NLIST) |
| #define CAN_USE_NLIST |
| #endif |
| |
| #if HAVE_DMALLOC_H |
| #define DMALLOC_FUNC_CHECK |
| #endif |
| |
| #undef INET6 |
| |
