| UCD-SNMP-MIB DEFINITIONS ::= BEGIN |
| |
| -- |
| -- UCD-SNMP-MIB: |
| -- A private enterprise mib (enterprise #2021) |
| -- |
| |
| -- Design notes: |
| -- |
| -- The design of this mib may seem unusual in parts, as it was |
| -- designed for ease of numerical management routines. |
| -- |
| -- In that light, most sub-sections of this mib have four common |
| -- numerical oid consistencies: |
| -- |
| -- 2021.ID.1 : an integer index value. In scalers, this is always |
| -- of value 1. In tables it is a row index. |
| -- 2021.ID.2 : a name of the script, process, etc. that this row represents. |
| -- 2021.ID.100 : An error flag indicating if an error is present on |
| -- that row (a threshold value was crossed, etc). |
| -- 2021.ID.101 : An error string describing why the error flag is non-0. |
| -- |
| -- These conventions enable managers to easy examine portions of the |
| -- mib by setting the ID to the sub-section they are interested in |
| -- monitoring, and then scanning the .100 value to check for an |
| -- error(s), and get a more specific error message from .101 for the |
| -- named check found in .2. |
| -- |
| -- Row numbers between 2 and 100 are sub-section specific. |
| -- |
| -- Mib sections utilizing the above conventions: |
| -- Tables: procTable, execTable, diskTable, loadTable |
| -- Scalers: memory, snmperrs |
| |
| |
| IMPORTS |
| enterprises |
| FROM RFC1155-SMI |
| OBJECT-TYPE |
| FROM RFC-1212 |
| DisplayString |
| FROM RFC1213-MIB |
| TruthValue |
| FROM SNMPv2-TC |
| TRAP-TYPE |
| FROM RFC-1215; |
| |
| -- numerical definitions: |
| ucdavis OBJECT IDENTIFIER ::= { enterprises 2021 } |
| ucdInternal OBJECT IDENTIFIER ::= { ucdavis 12 } |
| ucdExperimental OBJECT IDENTIFIER ::= { ucdavis 13 } |
| |
| -- Local tables: |
| -- procTable OBJECT IDENTIFIER ::= { ucdavis 2 } |
| -- memory OBJECT IDENTIFIER ::= { ucdavis 4 } |
| -- extTable OBJECT IDENTIFIER ::= { ucdavis 8 } |
| -- diskTable OBJECT IDENTIFIER ::= { ucdavis 9 } |
| -- loadTable OBJECT IDENTIFIER ::= { ucdavis 10 } |
| -- systemStats OBJECT IDENTIFIER ::= { ucdavis 11 } |
| -- ipFwAcc OBJECT IDENTIFIER ::= { ucdExperimental 1 } |
| -- (defined in IPFWACC-MIB.txt) |
| -- ucdDemoMIB OBJECT IDENTIFIER ::= { ucdavis 14 } |
| -- fileTable OBJECT IDENTIFIER ::= { ucdavis 15 } |
| -- version OBJECT IDENTIFIER ::= { ucdavis 100 } |
| -- snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 } |
| -- mibRegistryTable OBJECT IDENTIFIER ::= { ucdavis 102 } |
| |
| -- Older mib table entries that were changed to new locations above: |
| -- processes OBJECT IDENTIFIER ::= { ucdavis 1 } |
| -- exec OBJECT IDENTIFIER ::= { ucdavis 3 } |
| -- disk OBJECT IDENTIFIER ::= { ucdavis 6 } |
| -- load OBJECT IDENTIFIER ::= { ucdavis 7 } |
| |
| -- Never implemented and removed from the mib: |
| -- lockd OBJECT IDENTIFIER ::= { ucdavis 5 } |
| |
| -- Reserved |
| -- ucdInternal OBJECT IDENTIFIER ::= { ucdavis 12 } |
| -- ucdExperimental OBJECT IDENTIFIER ::= { ucdavis 13 } |
| -- ucdDemoMIB OBJECT IDENTIFIER ::= { ucdavis 14 } |
| |
| |
| -- These are the returned values of the agent type. |
| -- returned to: .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0 |
| |
| ucdSnmpAgent OBJECT IDENTIFIER ::= { ucdavis 250 } |
| hpux9 OBJECT IDENTIFIER ::= { ucdSnmpAgent 1 } |
| hpux10 OBJECT IDENTIFIER ::= { ucdSnmpAgent 6 } |
| sunos4 OBJECT IDENTIFIER ::= { ucdSnmpAgent 2 } |
| solaris OBJECT IDENTIFIER ::= { ucdSnmpAgent 3 } |
| osf OBJECT IDENTIFIER ::= { ucdSnmpAgent 4 } |
| ultrix OBJECT IDENTIFIER ::= { ucdSnmpAgent 5 } |
| netbsd1 OBJECT IDENTIFIER ::= { ucdSnmpAgent 7 } |
| freebsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 8 } |
| irix OBJECT IDENTIFIER ::= { ucdSnmpAgent 9 } |
| linux OBJECT IDENTIFIER ::= { ucdSnmpAgent 10 } |
| bsdi OBJECT IDENTIFIER ::= { ucdSnmpAgent 11 } |
| openbsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 12 } |
| unknown OBJECT IDENTIFIER ::= { ucdSnmpAgent 255 } |
| |
| -- |
| -- Define the Float Textual Convention |
| -- This definition was written by David Perkins. |
| -- |
| Float ::= TEXTUAL-CONVENTION |
| STATUS current |
| DESCRIPTION |
| "A single precision floating-point number. The semantics |
| and encoding are identical for type 'single' defined in |
| IEEE Standard for Binary Floating-Point, |
| ANSI/IEEE Std 754-1985. |
| The value is restricted to the BER serialization of |
| the following ASN.1 type: |
| FLOATTYPE ::= [120] IMPLICIT FloatType |
| (note: the value 120 is the sum of '30'h and '48'h) |
| The BER serialization of the length for values of |
| this type must use the definite length, short |
| encoding form. |
| |
| For example, the BER serialization of value 123 |
| of type FLOATTYPE is '9f780442f60000'h. (The tag |
| is '9f78'h; the length is '04'h; and the value is |
| '42f60000'h.) The BER serialization of value |
| '9f780442f60000'h of data type Opaque is |
| '44079f780442f60000'h. (The tag is '44'h; the length |
| is '07'h; and the value is '9f780442f60000'h." |
| SYNTAX Opaque (SIZE(7)) |
| |
| -- |
| -- Process table checks |
| -- |
| |
| PrIndex ::= INTEGER (0..65535) |
| |
| procTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF PrEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "A table containing information on running |
| programs/daemons configured for monitoring in the |
| snmpd.conf file of the agent. Processes violating the |
| number of running processes required by the agent's |
| configuration file are flagged with numerical and |
| textual errors." |
| ::= { ucdavis 2 } |
| |
| prEntry OBJECT-TYPE |
| SYNTAX PrEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "An entry containing a process and its statistics." |
| INDEX { prIndex } |
| ::= { procTable 1 } |
| |
| |
| PrEntry ::= SEQUENCE { |
| prIndex PrIndex, |
| prNames DisplayString, |
| prMin INTEGER, |
| prMax INTEGER, |
| prCount INTEGER, |
| prErrorFlag INTEGER, |
| prErrMessage DisplayString, |
| prErrFix INTEGER |
| } |
| |
| prIndex OBJECT-TYPE |
| SYNTAX PrIndex |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Reference Index for each observed process." |
| ::= { prEntry 1 } |
| |
| prNames OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The process name we're counting/checking on." |
| ::= { prEntry 2 } |
| |
| prMin OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The minimum number of processes that should be |
| running. An error flag is generated if the number of |
| running processes is < the minimum." |
| ::= { prEntry 3 } |
| |
| prMax OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The maximum number of processes that should be |
| running. An error flag is generated if the number of |
| running processes is > the maximum." |
| ::= { prEntry 4 } |
| |
| prCount OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of current processes running with the name |
| in question." |
| ::= { prEntry 5 } |
| |
| prErrorFlag OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "A Error flag to indicate trouble with a process. It |
| goes to 1 if there is an error, 0 if no error." |
| ::= { prEntry 100 } |
| |
| prErrMessage OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "An error message describing the problem (if one exists)." |
| ::= { prEntry 101 } |
| |
| prErrFix OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "Setting this to one will try to fix the problem if |
| the agent has been configured with a script to call |
| to attempt to fix problems automatically using remote |
| snmp operations." |
| ::= { prEntry 102 } |
| |
| prErrFixCmd OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The command that gets run when the prErrFix column is |
| set to 1." |
| ::= { prEntry 103 } |
| |
| ExtIndex ::= INTEGER (0..65535) |
| |
| extTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF ExtEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "A table of extensible commands returning output and |
| result codes. These commands are configured via the |
| agent's snmpd.conf file." |
| ::= { ucdavis 8 } |
| |
| extEntry OBJECT-TYPE |
| SYNTAX ExtEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "An entry containing an extensible script/program and its output." |
| INDEX { extIndex } |
| ::= { extTable 1 } |
| |
| ExtEntry ::= SEQUENCE { |
| extIndex ExtIndex, |
| extNames DisplayString, |
| extCommand DisplayString, |
| extResult INTEGER, |
| extOutput DisplayString, |
| extErrFix INTEGER |
| } |
| |
| extIndex OBJECT-TYPE |
| SYNTAX ExtIndex |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Reference Index for extensible scripts. Simply an |
| integer row number." |
| ::= { extEntry 1 } |
| |
| extNames OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "A Short, one name description of the extensible command." |
| ::= { extEntry 2 } |
| |
| extCommand OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The command line to be executed." |
| ::= { extEntry 3 } |
| |
| extResult OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The result code (exit status) from the executed command." |
| ::= { extEntry 100 } |
| |
| extOutput OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The first line of output of the executed command." |
| ::= { extEntry 101 } |
| |
| extErrFix OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "Setting this to one will try to fix the problem if |
| the agent has been configured with a script to call |
| to attempt to fix problems automatically using remote |
| snmp operations." |
| ::= { extEntry 102 } |
| |
| extErrFixCmd OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The command that gets run when the extErrFix column is |
| set to 1." |
| ::= { extEntry 103 } |
| |
| -- |
| -- Memory usage/watch reporting. |
| -- Not supported on all systems! |
| -- See agent/mibgroup/ucd_snmp.h to see if its loaded for your architecture. |
| -- |
| memory OBJECT IDENTIFIER ::= { ucdavis 4 } |
| |
| memIndex OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Bogus Index. This should always return the integer 0." |
| ::= { memory 1 } |
| |
| memErrorName OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Bogus Name. This should always return the string 'swap'." |
| ::= { memory 2 } |
| |
| memTotalSwap OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Total Swap Size configured for the host." |
| ::= { memory 3 } |
| |
| memAvailSwap OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Available Swap Space on the host." |
| ::= { memory 4 } |
| |
| memTotalReal OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Total Real/Physical Memory Size on the host." |
| ::= { memory 5 } |
| |
| memAvailReal OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Available Real/Physical Memory Space on the host." |
| ::= { memory 6 } |
| |
| memTotalSwapTXT OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Total virtual memory used by text." |
| ::= { memory 7 } |
| |
| memAvailSwapTXT OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Active virtual memory used by text." |
| ::= { memory 8 } |
| |
| memTotalRealTXT OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Total Real/Physical Memory Size used by text." |
| ::= { memory 9 } |
| |
| memAvailRealTXT OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Active Real/Physical Memory Space used by text." |
| ::= { memory 10 } |
| |
| memTotalFree OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Total Available Memory on the host" |
| ::= { memory 11 } |
| |
| memMinimumSwap OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Minimum amount of free swap required to be free |
| or else memErrorSwap is set to 1 and an error string is |
| returned memSwapErrorMsg." |
| ::= { memory 12 } |
| |
| memShared OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Total Shared Memory" |
| ::= { memory 13 } |
| |
| memBuffer OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Total Buffered Memory" |
| ::= { memory 14 } |
| |
| memCached OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Total Cached Memory" |
| ::= { memory 15 } |
| |
| memSwapError OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Error flag. 1 indicates very little swap space left" |
| ::= { memory 100 } |
| |
| memSwapErrorMsg OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Error message describing the Error Flag condition" |
| ::= { memory 101 } |
| |
| DiskIndex ::= INTEGER (0..65535) |
| |
| diskTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF DskEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "Disk watching information. Partions to be watched |
| are configured by the snmpd.conf file of the agent." |
| ::= { ucdavis 9 } |
| |
| dskEntry OBJECT-TYPE |
| SYNTAX DskEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "An entry containing a disk and its statistics." |
| INDEX { dskIndex } |
| ::= { diskTable 1 } |
| |
| DskEntry ::= SEQUENCE { |
| dskIndex DiskIndex, |
| dskPath DisplayString, |
| dskDevice DisplayString, |
| dskMinimum INTEGER, |
| dskMinPercent INTEGER, |
| dskTotal INTEGER, |
| dskAvail INTEGER, |
| dskUsed INTEGER, |
| dskPercent INTEGER, |
| dskErrorFlag INTEGER, |
| dskErrorMsg DisplayString |
| } |
| |
| dskIndex OBJECT-TYPE |
| SYNTAX DiskIndex |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Integer reference number (row number) for the disk mib." |
| ::= { dskEntry 1 } |
| |
| dskPath OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Path where the disk is mounted." |
| ::= { dskEntry 2 } |
| |
| dskDevice OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Path of the device for the partition" |
| ::= { dskEntry 3 } |
| |
| dskMinimum OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Minimum space required on the disk (in kBytes) before the |
| errors are triggered. Either this or dskMinPercent is |
| configured via the agent's snmpd.conf file." |
| ::= { dskEntry 4 } |
| |
| dskMinPercent OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Percentage of minimum space required on the disk before the |
| errors are triggered. Either this or dskMinimum is |
| configured via the agent's snmpd.conf file." |
| ::= { dskEntry 5 } |
| |
| dskTotal OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Total size of the disk/partion (kbytes)" |
| ::= { dskEntry 6 } |
| |
| dskAvail OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Available space on the disk" |
| ::= { dskEntry 7 } |
| |
| dskUsed OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Used space on the disk" |
| ::= { dskEntry 8 } |
| |
| dskPercent OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Percentage of space used on disk" |
| ::= { dskEntry 9 } |
| |
| dskErrorFlag OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Error flag signaling that the disk or partition is under |
| the minimum required space configured for it." |
| ::= { dskEntry 100 } |
| |
| dskErrorMsg OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "A text description providing a warning and the space left |
| on the disk." |
| ::= { dskEntry 101 } |
| |
| LoadIndex ::= INTEGER (0..3) |
| |
| loadTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF LaEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "Load average information." |
| ::= { ucdavis 10 } |
| |
| laEntry OBJECT-TYPE |
| SYNTAX LaEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "An entry containing a load average and its values." |
| INDEX { laIndex } |
| ::= { loadTable 1 } |
| |
| LaEntry ::= SEQUENCE { |
| laIndex LoadIndex, |
| laNames DisplayString, |
| laLoad DisplayString, |
| laConfig DisplayString, |
| laErrorFlag INTEGER, |
| laErrMessage DisplayString |
| } |
| |
| laIndex OBJECT-TYPE |
| SYNTAX LoadIndex |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "reference index/row number for each observed loadave." |
| ::= { laEntry 1 } |
| |
| laNames OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The list of loadave names we're watching." |
| ::= { laEntry 2 } |
| |
| laLoad OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The 1,5 and 10 minute load averages (one per row)." |
| ::= { laEntry 3 } |
| |
| laConfig OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The watch point for load-averages to signal an |
| error. If the load averages rises above this value, |
| the laErrorFlag below is set." |
| ::= { laEntry 4 } |
| |
| laLoadInt OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The 1,5 and 10 minute load averages as an integer. |
| This is computed by taking the floating point |
| loadaverage value and multiplying by 100, then |
| converting the value to an integer." |
| ::= { laEntry 5 } |
| |
| laLoadFloat OBJECT-TYPE |
| SYNTAX Float |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The 1,5 and 10 minute load averages as an opaquely |
| wrapped floating point number." |
| ::= { laEntry 6 } |
| |
| laErrorFlag OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "A Error flag to indicate the load-average has crossed |
| its threshold value defined in the snmpd.conf file. |
| It is set to 1 if the threshold is crossed, 0 otherwise." |
| ::= { laEntry 100 } |
| |
| laErrMessage OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "An error message describing the load-average and its |
| surpased watch-point value." |
| ::= { laEntry 101 } |
| |
| version OBJECT IDENTIFIER ::= { ucdavis 100 } |
| |
| versionIndex OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Index to mib (always 0)" |
| ::= { version 1 } |
| |
| versionTag OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "CVS tag keyword" |
| ::= { version 2 } |
| |
| versionDate OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Date string from RCS keyword" |
| ::= { version 3 } |
| |
| versionCDate OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Date string from ctime() " |
| ::= { version 4 } |
| |
| versionIdent OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Id string from RCS keyword" |
| ::= { version 5 } |
| |
| versionConfigureOptions OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Options passed to the configure script when this agent was built." |
| ::= { version 6 } |
| |
| versionClearCache OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "Set to 1 to clear the exec cache, if enabled" |
| ::= { version 10 } |
| |
| versionUpdateConfig OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "Set to 1 to read-read the config file(s)." |
| ::= { version 11 } |
| |
| versionRestartAgent OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "Set to 1 to restart the agent." |
| ::= { version 12 } |
| |
| versionDoDebugging OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-write |
| STATUS mandatory |
| DESCRIPTION |
| "Set to 1 to turn debugging statements on in the agent or 0 |
| to turn it off." |
| ::= { version 20 } |
| |
| snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 } |
| |
| |
| snmperrIndex OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Bogus Index for snmperrs (always 0)." |
| ::= { snmperrs 1 } |
| |
| snmperrNames OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "snmp" |
| ::= { snmperrs 2 } |
| |
| snmperrErrorFlag OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "A Error flag to indicate trouble with the agent. It |
| goes to 1 if there is an error, 0 if no error." |
| ::= { snmperrs 100 } |
| |
| snmperrErrMessage OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "An error message describing the problem (if one exists)." |
| ::= { snmperrs 101 } |
| |
| MrIndex ::= OBJECT IDENTIFIER |
| |
| mibRegistryTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF MrEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "A table displaying all the oid's registered by mib modules in |
| the agent. Since the agent is modular in nature, this lists |
| each module's OID it is responsible for and the name of the module" |
| ::= { ucdavis 102 } |
| |
| mrEntry OBJECT-TYPE |
| SYNTAX MrEntry |
| ACCESS not-accessible |
| STATUS mandatory |
| DESCRIPTION |
| "An entry containing a registered mib oid." |
| INDEX { mrIndex } |
| ::= { mibRegistryTable 1 } |
| |
| MrEntry ::= |
| SEQUENCE { |
| mrIndex |
| MrIndex, |
| mrModuleName |
| DisplayString |
| } |
| |
| mrIndex OBJECT-TYPE |
| SYNTAX MrIndex |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The registry slot of a mibmodule." |
| ::= { mrEntry 1 } |
| |
| mrModuleName OBJECT-TYPE |
| SYNTAX DisplayString |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The module name that registered this OID." |
| ::= { mrEntry 2 } |
| |
| systemStats OBJECT IDENTIFIER ::= { ucdavis 11 } |
| |
| ssIndex OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Reference Index for each observed systemStat (1)." |
| ::= { systemStats 1 } |
| |
| ssErrorName OBJECT-TYPE |
| SYNTAX DisplayString (SIZE (0..255)) |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The list of systemStats names (vmstat) we're Counting." |
| ::= { systemStats 2 } |
| |
| ssSwapIn OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Amount of memory swapped in from disk (kB/s)." |
| ::= { systemStats 3 } |
| |
| ssSwapOut OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Amount of memory swapped to disk (kB/s)." |
| ::= { systemStats 4 } |
| |
| ssIOSent OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Blocks sent to a block device (blocks/s)." |
| ::= { systemStats 5 } |
| |
| ssIOReceive OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "Blocks received from a block device (blocks/s)." |
| ::= { systemStats 6 } |
| |
| ssSysInterrupts OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of interrupts per second, including the clock." |
| ::= { systemStats 7 } |
| |
| ssSysContext OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "The number of context switches per second." |
| ::= { systemStats 8 } |
| |
| ssCpuUser OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "percentages of user CPU time." |
| ::= { systemStats 9 } |
| |
| ssCpuSystem OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "percentages of system CPU time." |
| ::= { systemStats 10 } |
| |
| ssCpuIdle OBJECT-TYPE |
| SYNTAX INTEGER |
| ACCESS read-only |
| STATUS mandatory |
| DESCRIPTION |
| "percentages of idle CPU time." |
| ::= { systemStats 11 } |
| |
| -- possibly used in the future: |
| -- |
| -- ssErrorFlag OBJECT-TYPE |
| -- SYNTAX INTEGER |
| -- ACCESS read-only |
| -- STATUS mandatory |
| -- DESCRIPTION |
| -- "Error flag." |
| -- ::= { systemStats 100 } |
| -- |
| -- ssErrMessage OBJECT-TYPE |
| -- SYNTAX DisplayString |
| -- ACCESS read-only |
| -- STATUS mandatory |
| -- DESCRIPTION |
| -- "Error message describing the errorflag condition" |
| -- ::= { systemStats 101 } |
| |
| ucdTraps OBJECT IDENTIFIER ::= { ucdavis 251 } |
| |
| ucdStart TRAP-TYPE |
| ENTERPRISE ucdTraps |
| ::= 1 |
| |
| ucdShutdown TRAP-TYPE |
| ENTERPRISE ucdTraps |
| DESCRIPTION "This trap is sent when the agent terminates" |
| ::= 2 |
| |
| |
| -- |
| -- File Table: monitor a list of files to check for a maximum size. |
| -- |
| |
| fileTable OBJECT-TYPE |
| SYNTAX SEQUENCE OF FileEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION "Table of monitored files" |
| INDEX { fileIndex } |
| ::= { ucdavis 15 } |
| |
| fileEntry OBJECT-TYPE |
| SYNTAX FileEntry |
| MAX-ACCESS not-accessible |
| STATUS current |
| DESCRIPTION "Entry of file" |
| ::= { fileTable 1 } |
| |
| FileEntry ::= SEQUENCE |
| { |
| fileIndex INTEGER, |
| fileName DisplayString, |
| fileSize INTEGER, |
| fileMax INTEGER, |
| fileError TruthValue, |
| fileErrorMsg DisplayString |
| } |
| |
| fileIndex OBJECT-TYPE |
| SYNTAX INTEGER |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION "Index of file" |
| ::= { fileEntry 1 } |
| |
| fileName OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION "Filename" |
| ::= { fileEntry 2 } |
| |
| fileSize OBJECT-TYPE |
| SYNTAX INTEGER |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION "Size of file (kb)" |
| ::= { fileEntry 3 } |
| |
| fileMax OBJECT-TYPE |
| SYNTAX INTEGER |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION "Limit of filesize (kb)" |
| ::= { fileEntry 4 } |
| |
| fileErrorFlag OBJECT-TYPE |
| SYNTAX INTEGER |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION "Limit exceeded flag" |
| ::= { fileEntry 100 } |
| |
| fileErrorMsg OBJECT-TYPE |
| SYNTAX DisplayString |
| MAX-ACCESS read-only |
| STATUS current |
| DESCRIPTION "Filesize error message" |
| ::= { fileEntry 101 } |
| |
| END |
