| # Test cases for dynamic BSS changes with hostapd |
| # Copyright (c) 2013, Qualcomm Atheros, Inc. |
| # |
| # This software may be distributed under the terms of the BSD license. |
| # See README for more details. |
| |
| import time |
| import subprocess |
| import logging |
| logger = logging.getLogger() |
| import os |
| |
| import hwsim_utils |
| import hostapd |
| from utils import alloc_fail |
| from test_ap_acs import force_prev_ap_on_24g |
| |
| def test_ap_change_ssid(dev, apdev): |
| """Dynamic SSID change with hostapd and WPA2-PSK""" |
| params = hostapd.wpa2_params(ssid="test-wpa2-psk-start", |
| passphrase="12345678") |
| hostapd.add_ap(apdev[0]['ifname'], params) |
| id = dev[0].connect("test-wpa2-psk-start", psk="12345678", |
| scan_freq="2412") |
| dev[0].request("DISCONNECT") |
| |
| logger.info("Change SSID dynamically") |
| hapd = hostapd.Hostapd(apdev[0]['ifname']) |
| res = hapd.request("SET ssid test-wpa2-psk-new") |
| if "OK" not in res: |
| raise Exception("SET command failed") |
| res = hapd.request("RELOAD") |
| if "OK" not in res: |
| raise Exception("RELOAD command failed") |
| |
| dev[0].set_network_quoted(id, "ssid", "test-wpa2-psk-new") |
| dev[0].connect_network(id) |
| |
| def multi_check(dev, check, scan_opt=True): |
| id = [] |
| num_bss = len(check) |
| for i in range(0, num_bss): |
| dev[i].request("BSS_FLUSH 0") |
| dev[i].dump_monitor() |
| for i in range(0, num_bss): |
| if check[i]: |
| continue |
| id.append(dev[i].connect("bss-" + str(i + 1), key_mgmt="NONE", |
| scan_freq="2412", wait_connect=False)) |
| for i in range(num_bss): |
| if not check[i]: |
| continue |
| bssid = '02:00:00:00:03:0' + str(i) |
| if scan_opt: |
| dev[i].scan_for_bss(bssid, freq=2412) |
| id.append(dev[i].connect("bss-" + str(i + 1), key_mgmt="NONE", |
| scan_freq="2412", wait_connect=True)) |
| first = True |
| for i in range(num_bss): |
| if not check[i]: |
| timeout=0.2 if first else 0.01 |
| first = False |
| ev = dev[i].wait_event(["CTRL-EVENT-CONNECTED"], timeout=timeout) |
| if ev: |
| raise Exception("Unexpected connection") |
| |
| for i in range(0, num_bss): |
| dev[i].remove_network(id[i]) |
| for i in range(num_bss): |
| if check[i]: |
| dev[i].wait_disconnected(timeout=5) |
| |
| res = '' |
| for i in range(0, num_bss): |
| res = res + dev[i].request("BSS RANGE=ALL MASK=0x2") |
| |
| for i in range(0, num_bss): |
| if not check[i]: |
| bssid = '02:00:00:00:03:0' + str(i) |
| if bssid in res: |
| raise Exception("Unexpected BSS" + str(i) + " in scan results") |
| |
| def test_ap_bss_add_remove(dev, apdev): |
| """Dynamic BSS add/remove operations with hostapd""" |
| try: |
| _test_ap_bss_add_remove(dev, apdev) |
| finally: |
| for i in range(3): |
| dev[i].request("SCAN_INTERVAL 5") |
| |
| def _test_ap_bss_add_remove(dev, apdev): |
| for i in range(3): |
| dev[i].request("SCAN_INTERVAL 1") |
| ifname1 = apdev[0]['ifname'] |
| ifname2 = apdev[0]['ifname'] + '-2' |
| ifname3 = apdev[0]['ifname'] + '-3' |
| logger.info("Set up three BSSes one by one") |
| hostapd.add_bss('phy3', ifname1, 'bss-1.conf') |
| multi_check(dev, [ True, False, False ]) |
| hostapd.add_bss('phy3', ifname2, 'bss-2.conf') |
| multi_check(dev, [ True, True, False ]) |
| hostapd.add_bss('phy3', ifname3, 'bss-3.conf') |
| multi_check(dev, [ True, True, True ]) |
| |
| logger.info("Remove the last BSS and re-add it") |
| hostapd.remove_bss(ifname3) |
| multi_check(dev, [ True, True, False ]) |
| hostapd.add_bss('phy3', ifname3, 'bss-3.conf') |
| multi_check(dev, [ True, True, True ]) |
| |
| logger.info("Remove the middle BSS and re-add it") |
| hostapd.remove_bss(ifname2) |
| multi_check(dev, [ True, False, True ]) |
| hostapd.add_bss('phy3', ifname2, 'bss-2.conf') |
| multi_check(dev, [ True, True, True ]) |
| |
| logger.info("Remove the first BSS and re-add it and other BSSs") |
| hostapd.remove_bss(ifname1) |
| multi_check(dev, [ False, False, False ]) |
| hostapd.add_bss('phy3', ifname1, 'bss-1.conf') |
| hostapd.add_bss('phy3', ifname2, 'bss-2.conf') |
| hostapd.add_bss('phy3', ifname3, 'bss-3.conf') |
| multi_check(dev, [ True, True, True ]) |
| |
| logger.info("Remove two BSSes and re-add them") |
| hostapd.remove_bss(ifname2) |
| multi_check(dev, [ True, False, True ]) |
| hostapd.remove_bss(ifname3) |
| multi_check(dev, [ True, False, False ]) |
| hostapd.add_bss('phy3', ifname2, 'bss-2.conf') |
| multi_check(dev, [ True, True, False ]) |
| hostapd.add_bss('phy3', ifname3, 'bss-3.conf') |
| multi_check(dev, [ True, True, True ]) |
| |
| logger.info("Remove three BSSes in and re-add them") |
| hostapd.remove_bss(ifname3) |
| multi_check(dev, [ True, True, False ]) |
| hostapd.remove_bss(ifname2) |
| multi_check(dev, [ True, False, False ]) |
| hostapd.remove_bss(ifname1) |
| multi_check(dev, [ False, False, False ]) |
| hostapd.add_bss('phy3', ifname1, 'bss-1.conf') |
| multi_check(dev, [ True, False, False ]) |
| hostapd.add_bss('phy3', ifname2, 'bss-2.conf') |
| multi_check(dev, [ True, True, False ]) |
| hostapd.add_bss('phy3', ifname3, 'bss-3.conf') |
| multi_check(dev, [ True, True, True ]) |
| |
| logger.info("Test error handling if a duplicate ifname is tried") |
| hostapd.add_bss('phy3', ifname3, 'bss-3.conf', ignore_error=True) |
| multi_check(dev, [ True, True, True ]) |
| |
| def test_ap_bss_add_remove_during_ht_scan(dev, apdev): |
| """Dynamic BSS add during HT40 co-ex scan""" |
| ifname1 = apdev[0]['ifname'] |
| ifname2 = apdev[0]['ifname'] + '-2' |
| hostapd.add_bss('phy3', ifname1, 'bss-ht40-1.conf') |
| hostapd.add_bss('phy3', ifname2, 'bss-ht40-2.conf') |
| multi_check(dev, [ True, True ], scan_opt=False) |
| hostapd.remove_bss(ifname2) |
| hostapd.remove_bss(ifname1) |
| |
| hostapd.add_bss('phy3', ifname1, 'bss-ht40-1.conf') |
| hostapd.add_bss('phy3', ifname2, 'bss-ht40-2.conf') |
| hostapd.remove_bss(ifname2) |
| multi_check(dev, [ True, False ], scan_opt=False) |
| hostapd.remove_bss(ifname1) |
| |
| hostapd.add_bss('phy3', ifname1, 'bss-ht40-1.conf') |
| hostapd.add_bss('phy3', ifname2, 'bss-ht40-2.conf') |
| hostapd.remove_bss(ifname1) |
| multi_check(dev, [ False, False ]) |
| |
| def test_ap_multi_bss_config(dev, apdev): |
| """hostapd start with a multi-BSS configuration file""" |
| ifname1 = apdev[0]['ifname'] |
| ifname2 = apdev[0]['ifname'] + '-2' |
| ifname3 = apdev[0]['ifname'] + '-3' |
| logger.info("Set up three BSSes with one configuration file") |
| hostapd.add_iface(ifname1, 'multi-bss.conf') |
| hapd = hostapd.Hostapd(ifname1) |
| hapd.enable() |
| multi_check(dev, [ True, True, True ]) |
| hostapd.remove_bss(ifname2) |
| multi_check(dev, [ True, False, True ]) |
| hostapd.remove_bss(ifname3) |
| multi_check(dev, [ True, False, False ]) |
| hostapd.remove_bss(ifname1) |
| multi_check(dev, [ False, False, False ]) |
| |
| hostapd.add_iface(ifname1, 'multi-bss.conf') |
| hapd = hostapd.Hostapd(ifname1) |
| hapd.enable() |
| hostapd.remove_bss(ifname1) |
| multi_check(dev, [ False, False, False ]) |
| |
| def invalid_ap(hapd_global, ifname): |
| logger.info("Trying to start AP " + ifname + " with invalid configuration") |
| hapd_global.remove(ifname) |
| hapd_global.add(ifname) |
| hapd = hostapd.Hostapd(ifname) |
| if not hapd.ping(): |
| raise Exception("Could not ping hostapd") |
| hapd.set_defaults() |
| hapd.set("ssid", "invalid-config") |
| hapd.set("channel", "12345") |
| try: |
| hapd.enable() |
| started = True |
| except Exception, e: |
| started = False |
| if started: |
| raise Exception("ENABLE command succeeded unexpectedly") |
| return hapd |
| |
| def test_ap_invalid_config(dev, apdev): |
| """Try to start AP with invalid configuration and fix configuration""" |
| hapd_global = hostapd.HostapdGlobal() |
| ifname = apdev[0]['ifname'] |
| hapd = invalid_ap(hapd_global, ifname) |
| |
| logger.info("Fix configuration and start AP again") |
| hapd.set("channel", "1") |
| hapd.enable() |
| dev[0].connect("invalid-config", key_mgmt="NONE", scan_freq="2412") |
| |
| def test_ap_invalid_config2(dev, apdev): |
| """Try to start AP with invalid configuration and remove interface""" |
| hapd_global = hostapd.HostapdGlobal() |
| ifname = apdev[0]['ifname'] |
| hapd = invalid_ap(hapd_global, ifname) |
| logger.info("Remove interface with failed configuration") |
| hapd_global.remove(ifname) |
| |
| def test_ap_remove_during_acs(dev, apdev): |
| """Remove interface during ACS""" |
| force_prev_ap_on_24g(apdev[0]) |
| params = hostapd.wpa2_params(ssid="test-acs-remove", passphrase="12345678") |
| params['channel'] = '0' |
| ifname = apdev[0]['ifname'] |
| hapd = hostapd.HostapdGlobal() |
| hostapd.add_ap(ifname, params) |
| hapd.remove(ifname) |
| |
| def test_ap_remove_during_acs2(dev, apdev): |
| """Remove BSS during ACS in multi-BSS configuration""" |
| force_prev_ap_on_24g(apdev[0]) |
| ifname = apdev[0]['ifname'] |
| ifname2 = ifname + "-2" |
| hapd_global = hostapd.HostapdGlobal() |
| hapd_global.add(ifname) |
| hapd = hostapd.Hostapd(ifname) |
| hapd.set_defaults() |
| hapd.set("ssid", "test-acs-remove") |
| hapd.set("channel", "0") |
| hapd.set("bss", ifname2) |
| hapd.set("ssid", "test-acs-remove2") |
| hapd.enable() |
| hapd_global.remove(ifname) |
| |
| def test_ap_remove_during_acs3(dev, apdev): |
| """Remove second BSS during ACS in multi-BSS configuration""" |
| force_prev_ap_on_24g(apdev[0]) |
| ifname = apdev[0]['ifname'] |
| ifname2 = ifname + "-2" |
| hapd_global = hostapd.HostapdGlobal() |
| hapd_global.add(ifname) |
| hapd = hostapd.Hostapd(ifname) |
| hapd.set_defaults() |
| hapd.set("ssid", "test-acs-remove") |
| hapd.set("channel", "0") |
| hapd.set("bss", ifname2) |
| hapd.set("ssid", "test-acs-remove2") |
| hapd.enable() |
| hapd_global.remove(ifname2) |
| |
| def test_ap_remove_during_ht_coex_scan(dev, apdev): |
| """Remove interface during HT co-ex scan""" |
| params = hostapd.wpa2_params(ssid="test-ht-remove", passphrase="12345678") |
| params['channel'] = '1' |
| params['ht_capab'] = "[HT40+]" |
| ifname = apdev[0]['ifname'] |
| hapd = hostapd.HostapdGlobal() |
| hostapd.add_ap(ifname, params) |
| hapd.remove(ifname) |
| |
| def test_ap_remove_during_ht_coex_scan2(dev, apdev): |
| """Remove BSS during HT co-ex scan in multi-BSS configuration""" |
| ifname = apdev[0]['ifname'] |
| ifname2 = ifname + "-2" |
| hapd_global = hostapd.HostapdGlobal() |
| hapd_global.add(ifname) |
| hapd = hostapd.Hostapd(ifname) |
| hapd.set_defaults() |
| hapd.set("ssid", "test-ht-remove") |
| hapd.set("channel", "1") |
| hapd.set("ht_capab", "[HT40+]") |
| hapd.set("bss", ifname2) |
| hapd.set("ssid", "test-ht-remove2") |
| hapd.enable() |
| hapd_global.remove(ifname) |
| |
| def test_ap_remove_during_ht_coex_scan3(dev, apdev): |
| """Remove second BSS during HT co-ex scan in multi-BSS configuration""" |
| ifname = apdev[0]['ifname'] |
| ifname2 = ifname + "-2" |
| hapd_global = hostapd.HostapdGlobal() |
| hapd_global.add(ifname) |
| hapd = hostapd.Hostapd(ifname) |
| hapd.set_defaults() |
| hapd.set("ssid", "test-ht-remove") |
| hapd.set("channel", "1") |
| hapd.set("ht_capab", "[HT40+]") |
| hapd.set("bss", ifname2) |
| hapd.set("ssid", "test-ht-remove2") |
| hapd.enable() |
| hapd_global.remove(ifname2) |
| |
| def test_ap_enable_disable_reenable(dev, apdev): |
| """Enable, disable, re-enable AP""" |
| ifname = apdev[0]['ifname'] |
| hapd_global = hostapd.HostapdGlobal() |
| hapd_global.add(ifname) |
| hapd = hostapd.Hostapd(ifname) |
| hapd.set_defaults() |
| hapd.set("ssid", "dynamic") |
| hapd.enable() |
| ev = hapd.wait_event(["AP-ENABLED"], timeout=30) |
| if ev is None: |
| raise Exception("AP startup timed out") |
| dev[0].connect("dynamic", key_mgmt="NONE", scan_freq="2412") |
| hapd.disable() |
| ev = hapd.wait_event(["AP-DISABLED"], timeout=30) |
| if ev is None: |
| raise Exception("AP disabling timed out") |
| dev[0].wait_disconnected(timeout=10) |
| hapd.enable() |
| ev = hapd.wait_event(["AP-ENABLED"], timeout=30) |
| if ev is None: |
| raise Exception("AP startup timed out") |
| dev[1].connect("dynamic", key_mgmt="NONE", scan_freq="2412") |
| dev[0].wait_connected(timeout=10) |
| |
| def test_ap_double_disable(dev, apdev): |
| """Double DISABLE regression test""" |
| hostapd.add_bss('phy3', apdev[0]['ifname'], 'bss-1.conf') |
| hostapd.add_bss('phy3', apdev[0]['ifname'] + '-2', 'bss-2.conf') |
| hapd = hostapd.Hostapd(apdev[0]['ifname']) |
| hapd.disable() |
| if "FAIL" not in hapd.request("DISABLE"): |
| raise Exception("Second DISABLE accepted unexpectedly") |
| hapd.enable() |
| hapd.disable() |
| if "FAIL" not in hapd.request("DISABLE"): |
| raise Exception("Second DISABLE accepted unexpectedly") |
| |
| def test_ap_bss_add_many(dev, apdev): |
| """Large number of BSS add operations with hostapd""" |
| try: |
| _test_ap_bss_add_many(dev, apdev) |
| finally: |
| dev[0].request("SCAN_INTERVAL 5") |
| ifname = apdev[0]['ifname'] |
| hapd = hostapd.HostapdGlobal() |
| hapd.flush() |
| for i in range(16): |
| ifname2 = ifname + '-' + str(i) |
| hapd.remove(ifname2) |
| try: |
| os.remove('/tmp/hwsim-bss.conf') |
| except: |
| pass |
| |
| def _test_ap_bss_add_many(dev, apdev): |
| ifname = apdev[0]['ifname'] |
| phy = 'phy3' |
| hostapd.add_bss(phy, ifname, 'bss-1.conf') |
| hapd = hostapd.HostapdGlobal() |
| fname = '/tmp/hwsim-bss.conf' |
| for i in range(16): |
| ifname2 = ifname + '-' + str(i) |
| with open(fname, 'w') as f: |
| f.write("driver=nl80211\n") |
| f.write("hw_mode=g\n") |
| f.write("channel=1\n") |
| f.write("ieee80211n=1\n") |
| f.write("interface=%s\n" % ifname2) |
| f.write("bssid=02:00:00:00:03:%02x\n" % (i + 1)) |
| f.write("ctrl_interface=/var/run/hostapd\n") |
| f.write("ssid=test-%d\n" % i) |
| hostapd.add_bss(phy, ifname2, fname) |
| os.remove(fname) |
| |
| dev[0].request("SCAN_INTERVAL 1") |
| dev[0].connect("bss-1", key_mgmt="NONE", scan_freq="2412") |
| dev[0].request("DISCONNECT") |
| dev[0].wait_disconnected(timeout=5) |
| for i in range(16): |
| dev[0].connect("test-%d" % i, key_mgmt="NONE", scan_freq="2412") |
| dev[0].request("DISCONNECT") |
| dev[0].wait_disconnected(timeout=5) |
| ifname2 = ifname + '-' + str(i) |
| hapd.remove(ifname2) |
| |
| def test_ap_bss_add_reuse_existing(dev, apdev): |
| """Dynamic BSS add operation reusing existing interface""" |
| ifname1 = apdev[0]['ifname'] |
| ifname2 = apdev[0]['ifname'] + '-2' |
| hostapd.add_bss('phy3', ifname1, 'bss-1.conf') |
| subprocess.check_call(["iw", "dev", ifname1, "interface", "add", ifname2, |
| "type", "__ap"]) |
| hostapd.add_bss('phy3', ifname2, 'bss-2.conf') |
| hostapd.remove_bss(ifname2) |
| subprocess.check_call(["iw", "dev", ifname2, "del"]) |
| |
| def hapd_bss_out_of_mem(hapd, phy, confname, count, func): |
| with alloc_fail(hapd, count, func): |
| hapd_global = hostapd.HostapdGlobal() |
| res = hapd_global.ctrl.request("ADD bss_config=" + phy + ":" + confname) |
| if "OK" in res: |
| raise Exception("add_bss succeeded") |
| |
| def test_ap_bss_add_out_of_memory(dev, apdev): |
| """Running out of memory while adding a BSS""" |
| hapd2 = hostapd.add_ap(apdev[1]['ifname'], { "ssid": "open" }) |
| |
| ifname1 = apdev[0]['ifname'] |
| ifname2 = apdev[0]['ifname'] + '-2' |
| |
| hapd_bss_out_of_mem(hapd2, 'phy3', 'bss-1.conf', 1, 'hostapd_add_iface') |
| for i in range(1, 3): |
| hapd_bss_out_of_mem(hapd2, 'phy3', 'bss-1.conf', |
| i, 'hostapd_interface_init_bss') |
| hapd_bss_out_of_mem(hapd2, 'phy3', 'bss-1.conf', |
| 1, 'ieee802_11_build_ap_params') |
| |
| hostapd.add_bss('phy3', ifname1, 'bss-1.conf') |
| |
| hapd_bss_out_of_mem(hapd2, 'phy3', 'bss-2.conf', |
| 1, 'hostapd_interface_init_bss') |
| hapd_bss_out_of_mem(hapd2, 'phy3', 'bss-2.conf', |
| 1, 'ieee802_11_build_ap_params') |
| |
| hostapd.add_bss('phy3', ifname2, 'bss-2.conf') |
| hostapd.remove_bss(ifname2) |
| hostapd.remove_bss(ifname1) |
| |
| def test_ap_multi_bss(dev, apdev): |
| """Multiple BSSes with hostapd""" |
| ifname1 = apdev[0]['ifname'] |
| ifname2 = apdev[0]['ifname'] + '-2' |
| hostapd.add_bss('phy3', ifname1, 'bss-1.conf') |
| hostapd.add_bss('phy3', ifname2, 'bss-2.conf') |
| dev[0].connect("bss-1", key_mgmt="NONE", scan_freq="2412") |
| dev[1].connect("bss-2", key_mgmt="NONE", scan_freq="2412") |
| |
| hapd1 = hostapd.Hostapd(ifname1) |
| hapd2 = hostapd.Hostapd(ifname2) |
| |
| hwsim_utils.test_connectivity(dev[0], hapd1) |
| hwsim_utils.test_connectivity(dev[1], hapd2) |
| |
| sta0 = hapd1.get_sta(dev[0].own_addr()) |
| sta1 = hapd2.get_sta(dev[1].own_addr()) |
| if 'rx_packets' not in sta0 or int(sta0['rx_packets']) < 1: |
| raise Exception("sta0 did not report receiving packets") |
| if 'rx_packets' not in sta1 or int(sta1['rx_packets']) < 1: |
| raise Exception("sta1 did not report receiving packets") |