| /* |
| * wpa_gui - WpaGui class |
| * Copyright (c) 2005-2011, Jouni Malinen <j@w1.fi> |
| * |
| * This software may be distributed under the terms of the BSD license. |
| * See README for more details. |
| */ |
| |
| #ifdef CONFIG_NATIVE_WINDOWS |
| #include <windows.h> |
| #endif /* CONFIG_NATIVE_WINDOWS */ |
| |
| #include <cstdio> |
| #include <unistd.h> |
| #include <QMessageBox> |
| #include <QCloseEvent> |
| #include <QImageReader> |
| #include <QSettings> |
| |
| #include "wpagui.h" |
| #include "dirent.h" |
| #include "common/wpa_ctrl.h" |
| #include "userdatarequest.h" |
| #include "networkconfig.h" |
| |
| |
| #ifndef QT_NO_DEBUG |
| #define debug(M, ...) qDebug("DEBUG %d: " M, __LINE__, ##__VA_ARGS__) |
| #else |
| #define debug(M, ...) do {} while (0) |
| #endif |
| |
| |
| WpaGui::WpaGui(QApplication *_app, QWidget *parent, const char *, Qt::WFlags) |
| : QMainWindow(parent), app(_app) |
| { |
| setupUi(this); |
| this->setWindowFlags(Qt::Dialog); |
| |
| #ifdef CONFIG_NATIVE_WINDOWS |
| fileStopServiceAction = new QAction(this); |
| fileStopServiceAction->setObjectName("Stop Service"); |
| fileStopServiceAction->setIconText(tr("Stop Service")); |
| fileMenu->insertAction(actionWPS, fileStopServiceAction); |
| |
| fileStartServiceAction = new QAction(this); |
| fileStartServiceAction->setObjectName("Start Service"); |
| fileStartServiceAction->setIconText(tr("Start Service")); |
| fileMenu->insertAction(fileStopServiceAction, fileStartServiceAction); |
| |
| connect(fileStartServiceAction, SIGNAL(triggered()), this, |
| SLOT(startService())); |
| connect(fileStopServiceAction, SIGNAL(triggered()), this, |
| SLOT(stopService())); |
| |
| addInterfaceAction = new QAction(this); |
| addInterfaceAction->setIconText(tr("Add Interface")); |
| fileMenu->insertAction(fileStartServiceAction, addInterfaceAction); |
| |
| connect(addInterfaceAction, SIGNAL(triggered()), this, |
| SLOT(addInterface())); |
| #endif /* CONFIG_NATIVE_WINDOWS */ |
| |
| (void) statusBar(); |
| |
| /* |
| * Disable WPS tab by default; it will be enabled if wpa_supplicant is |
| * built with WPS support. |
| */ |
| wpsTab->setEnabled(false); |
| wpaguiTab->setTabEnabled(wpaguiTab->indexOf(wpsTab), false); |
| |
| connect(fileEventHistoryAction, SIGNAL(triggered()), this, |
| SLOT(eventHistory())); |
| connect(fileSaveConfigAction, SIGNAL(triggered()), this, |
| SLOT(saveConfig())); |
| connect(actionWPS, SIGNAL(triggered()), this, SLOT(wpsDialog())); |
| connect(actionPeers, SIGNAL(triggered()), this, SLOT(peersDialog())); |
| connect(fileExitAction, SIGNAL(triggered()), qApp, SLOT(quit())); |
| connect(networkAddAction, SIGNAL(triggered()), this, |
| SLOT(addNetwork())); |
| connect(networkEditAction, SIGNAL(triggered()), this, |
| SLOT(editSelectedNetwork())); |
| connect(networkRemoveAction, SIGNAL(triggered()), this, |
| SLOT(removeSelectedNetwork())); |
| connect(networkEnableAllAction, SIGNAL(triggered()), this, |
| SLOT(enableAllNetworks())); |
| connect(networkDisableAllAction, SIGNAL(triggered()), this, |
| SLOT(disableAllNetworks())); |
| connect(networkRemoveAllAction, SIGNAL(triggered()), this, |
| SLOT(removeAllNetworks())); |
| connect(helpIndexAction, SIGNAL(triggered()), this, SLOT(helpIndex())); |
| connect(helpContentsAction, SIGNAL(triggered()), this, |
| SLOT(helpContents())); |
| connect(helpAboutAction, SIGNAL(triggered()), this, SLOT(helpAbout())); |
| connect(disconnectButton, SIGNAL(clicked()), this, SLOT(disconnect())); |
| connect(scanButton, SIGNAL(clicked()), this, SLOT(scan())); |
| connect(connectButton, SIGNAL(clicked()), this, SLOT(connectB())); |
| connect(adapterSelect, SIGNAL(activated(const QString&)), this, |
| SLOT(selectAdapter(const QString&))); |
| connect(networkSelect, SIGNAL(activated(const QString&)), this, |
| SLOT(selectNetwork(const QString&))); |
| connect(addNetworkButton, SIGNAL(clicked()), this, SLOT(addNetwork())); |
| connect(editNetworkButton, SIGNAL(clicked()), this, |
| SLOT(editListedNetwork())); |
| connect(removeNetworkButton, SIGNAL(clicked()), this, |
| SLOT(removeListedNetwork())); |
| connect(networkList, SIGNAL(itemSelectionChanged()), this, |
| SLOT(updateNetworkDisabledStatus())); |
| connect(enableRadioButton, SIGNAL(toggled(bool)), this, |
| SLOT(enableListedNetwork(bool))); |
| connect(disableRadioButton, SIGNAL(toggled(bool)), this, |
| SLOT(disableListedNetwork(bool))); |
| connect(scanNetworkButton, SIGNAL(clicked()), this, SLOT(scan())); |
| connect(networkList, SIGNAL(itemDoubleClicked(QListWidgetItem *)), |
| this, SLOT(editListedNetwork())); |
| connect(wpaguiTab, SIGNAL(currentChanged(int)), this, |
| SLOT(tabChanged(int))); |
| connect(wpsPbcButton, SIGNAL(clicked()), this, SLOT(wpsPbc())); |
| connect(wpsPinButton, SIGNAL(clicked()), this, SLOT(wpsGeneratePin())); |
| connect(wpsApPinEdit, SIGNAL(textChanged(const QString &)), this, |
| SLOT(wpsApPinChanged(const QString &))); |
| connect(wpsApPinButton, SIGNAL(clicked()), this, SLOT(wpsApPin())); |
| |
| eh = NULL; |
| scanres = NULL; |
| peers = NULL; |
| add_iface = NULL; |
| udr = NULL; |
| tray_icon = NULL; |
| startInTray = false; |
| quietMode = false; |
| ctrl_iface = NULL; |
| ctrl_conn = NULL; |
| monitor_conn = NULL; |
| msgNotifier = NULL; |
| ctrl_iface_dir = strdup("/var/run/wpa_supplicant"); |
| |
| parse_argv(); |
| |
| #ifndef QT_NO_SESSIONMANAGER |
| if (app->isSessionRestored()) { |
| QSettings settings("wpa_supplicant", "wpa_gui"); |
| settings.beginGroup("state"); |
| if (app->sessionId().compare(settings.value("session_id"). |
| toString()) == 0) |
| startInTray = settings.value("in_tray").toBool(); |
| settings.endGroup(); |
| } |
| #endif |
| |
| if (QSystemTrayIcon::isSystemTrayAvailable()) |
| createTrayIcon(startInTray); |
| else |
| show(); |
| |
| connectedToService = false; |
| textStatus->setText(tr("connecting to wpa_supplicant")); |
| timer = new QTimer(this); |
| connect(timer, SIGNAL(timeout()), SLOT(ping())); |
| timer->setSingleShot(FALSE); |
| timer->start(1000); |
| |
| if (openCtrlConnection(ctrl_iface) < 0) { |
| debug("Failed to open control connection to " |
| "wpa_supplicant."); |
| } |
| |
| updateStatus(); |
| networkMayHaveChanged = true; |
| updateNetworks(); |
| } |
| |
| |
| WpaGui::~WpaGui() |
| { |
| delete msgNotifier; |
| |
| if (monitor_conn) { |
| wpa_ctrl_detach(monitor_conn); |
| wpa_ctrl_close(monitor_conn); |
| monitor_conn = NULL; |
| } |
| if (ctrl_conn) { |
| wpa_ctrl_close(ctrl_conn); |
| ctrl_conn = NULL; |
| } |
| |
| if (eh) { |
| eh->close(); |
| delete eh; |
| eh = NULL; |
| } |
| |
| if (scanres) { |
| scanres->close(); |
| delete scanres; |
| scanres = NULL; |
| } |
| |
| if (peers) { |
| peers->close(); |
| delete peers; |
| peers = NULL; |
| } |
| |
| if (add_iface) { |
| add_iface->close(); |
| delete add_iface; |
| add_iface = NULL; |
| } |
| |
| if (udr) { |
| udr->close(); |
| delete udr; |
| udr = NULL; |
| } |
| |
| free(ctrl_iface); |
| ctrl_iface = NULL; |
| |
| free(ctrl_iface_dir); |
| ctrl_iface_dir = NULL; |
| } |
| |
| |
| void WpaGui::languageChange() |
| { |
| retranslateUi(this); |
| } |
| |
| |
| void WpaGui::parse_argv() |
| { |
| int c; |
| for (;;) { |
| c = getopt(qApp->argc(), qApp->argv(), "i:p:tq"); |
| if (c < 0) |
| break; |
| switch (c) { |
| case 'i': |
| free(ctrl_iface); |
| ctrl_iface = strdup(optarg); |
| break; |
| case 'p': |
| free(ctrl_iface_dir); |
| ctrl_iface_dir = strdup(optarg); |
| break; |
| case 't': |
| startInTray = true; |
| break; |
| case 'q': |
| quietMode = true; |
| break; |
| } |
| } |
| } |
| |
| |
| int WpaGui::openCtrlConnection(const char *ifname) |
| { |
| char *cfile; |
| int flen; |
| char buf[2048], *pos, *pos2; |
| size_t len; |
| |
| if (ifname) { |
| if (ifname != ctrl_iface) { |
| free(ctrl_iface); |
| ctrl_iface = strdup(ifname); |
| } |
| } else { |
| #ifdef CONFIG_CTRL_IFACE_UDP |
| free(ctrl_iface); |
| ctrl_iface = strdup("udp"); |
| #endif /* CONFIG_CTRL_IFACE_UDP */ |
| #ifdef CONFIG_CTRL_IFACE_UNIX |
| struct dirent *dent; |
| DIR *dir = opendir(ctrl_iface_dir); |
| free(ctrl_iface); |
| ctrl_iface = NULL; |
| if (dir) { |
| while ((dent = readdir(dir))) { |
| #ifdef _DIRENT_HAVE_D_TYPE |
| /* Skip the file if it is not a socket. |
| * Also accept DT_UNKNOWN (0) in case |
| * the C library or underlying file |
| * system does not support d_type. */ |
| if (dent->d_type != DT_SOCK && |
| dent->d_type != DT_UNKNOWN) |
| continue; |
| #endif /* _DIRENT_HAVE_D_TYPE */ |
| |
| if (strcmp(dent->d_name, ".") == 0 || |
| strcmp(dent->d_name, "..") == 0) |
| continue; |
| debug("Selected interface '%s'", |
| dent->d_name); |
| ctrl_iface = strdup(dent->d_name); |
| break; |
| } |
| closedir(dir); |
| } |
| #endif /* CONFIG_CTRL_IFACE_UNIX */ |
| #ifdef CONFIG_CTRL_IFACE_NAMED_PIPE |
| struct wpa_ctrl *ctrl; |
| int ret; |
| |
| free(ctrl_iface); |
| ctrl_iface = NULL; |
| |
| ctrl = wpa_ctrl_open(NULL); |
| if (ctrl) { |
| len = sizeof(buf) - 1; |
| ret = wpa_ctrl_request(ctrl, "INTERFACES", 10, buf, |
| &len, NULL); |
| if (ret >= 0) { |
| connectedToService = true; |
| buf[len] = '\0'; |
| pos = strchr(buf, '\n'); |
| if (pos) |
| *pos = '\0'; |
| ctrl_iface = strdup(buf); |
| } |
| wpa_ctrl_close(ctrl); |
| } |
| #endif /* CONFIG_CTRL_IFACE_NAMED_PIPE */ |
| } |
| |
| if (ctrl_iface == NULL) { |
| #ifdef CONFIG_NATIVE_WINDOWS |
| static bool first = true; |
| if (first && !serviceRunning()) { |
| first = false; |
| if (QMessageBox::warning( |
| this, qAppName(), |
| tr("wpa_supplicant service is not " |
| "running.\n" |
| "Do you want to start it?"), |
| QMessageBox::Yes | QMessageBox::No) == |
| QMessageBox::Yes) |
| startService(); |
| } |
| #endif /* CONFIG_NATIVE_WINDOWS */ |
| return -1; |
| } |
| |
| #ifdef CONFIG_CTRL_IFACE_UNIX |
| flen = strlen(ctrl_iface_dir) + strlen(ctrl_iface) + 2; |
| cfile = (char *) malloc(flen); |
| if (cfile == NULL) |
| return -1; |
| snprintf(cfile, flen, "%s/%s", ctrl_iface_dir, ctrl_iface); |
| #else /* CONFIG_CTRL_IFACE_UNIX */ |
| flen = strlen(ctrl_iface) + 1; |
| cfile = (char *) malloc(flen); |
| if (cfile == NULL) |
| return -1; |
| snprintf(cfile, flen, "%s", ctrl_iface); |
| #endif /* CONFIG_CTRL_IFACE_UNIX */ |
| |
| if (ctrl_conn) { |
| wpa_ctrl_close(ctrl_conn); |
| ctrl_conn = NULL; |
| } |
| |
| if (monitor_conn) { |
| delete msgNotifier; |
| msgNotifier = NULL; |
| wpa_ctrl_detach(monitor_conn); |
| wpa_ctrl_close(monitor_conn); |
| monitor_conn = NULL; |
| } |
| |
| debug("Trying to connect to '%s'", cfile); |
| ctrl_conn = wpa_ctrl_open(cfile); |
| if (ctrl_conn == NULL) { |
| free(cfile); |
| return -1; |
| } |
| monitor_conn = wpa_ctrl_open(cfile); |
| free(cfile); |
| if (monitor_conn == NULL) { |
| wpa_ctrl_close(ctrl_conn); |
| return -1; |
| } |
| if (wpa_ctrl_attach(monitor_conn)) { |
| debug("Failed to attach to wpa_supplicant"); |
| wpa_ctrl_close(monitor_conn); |
| monitor_conn = NULL; |
| wpa_ctrl_close(ctrl_conn); |
| ctrl_conn = NULL; |
| return -1; |
| } |
| |
| #if defined(CONFIG_CTRL_IFACE_UNIX) || defined(CONFIG_CTRL_IFACE_UDP) |
| msgNotifier = new QSocketNotifier(wpa_ctrl_get_fd(monitor_conn), |
| QSocketNotifier::Read, this); |
| connect(msgNotifier, SIGNAL(activated(int)), SLOT(receiveMsgs())); |
| #endif |
| |
| adapterSelect->clear(); |
| adapterSelect->addItem(ctrl_iface); |
| adapterSelect->setCurrentIndex(0); |
| |
| len = sizeof(buf) - 1; |
| if (wpa_ctrl_request(ctrl_conn, "INTERFACES", 10, buf, &len, NULL) >= |
| 0) { |
| buf[len] = '\0'; |
| pos = buf; |
| while (*pos) { |
| pos2 = strchr(pos, '\n'); |
| if (pos2) |
| *pos2 = '\0'; |
| if (strcmp(pos, ctrl_iface) != 0) |
| adapterSelect->addItem(pos); |
| if (pos2) |
| pos = pos2 + 1; |
| else |
| break; |
| } |
| } |
| |
| len = sizeof(buf) - 1; |
| if (wpa_ctrl_request(ctrl_conn, "GET_CAPABILITY eap", 18, buf, &len, |
| NULL) >= 0) { |
| buf[len] = '\0'; |
| |
| QString res(buf); |
| QStringList types = res.split(QChar(' ')); |
| bool wps = types.contains("WSC"); |
| actionWPS->setEnabled(wps); |
| wpsTab->setEnabled(wps); |
| wpaguiTab->setTabEnabled(wpaguiTab->indexOf(wpsTab), wps); |
| } |
| |
| return 0; |
| } |
| |
| |
| int WpaGui::ctrlRequest(const char *cmd, char *buf, size_t *buflen) |
| { |
| int ret; |
| |
| if (ctrl_conn == NULL) |
| return -3; |
| ret = wpa_ctrl_request(ctrl_conn, cmd, strlen(cmd), buf, buflen, NULL); |
| if (ret == -2) |
| debug("'%s' command timed out.", cmd); |
| else if (ret < 0) |
| debug("'%s' command failed.", cmd); |
| |
| return ret; |
| } |
| |
| |
| QString WpaGui::wpaStateTranslate(char *state) |
| { |
| if (!strcmp(state, "DISCONNECTED")) |
| return tr("Disconnected"); |
| else if (!strcmp(state, "INACTIVE")) |
| return tr("Inactive"); |
| else if (!strcmp(state, "SCANNING")) |
| return tr("Scanning"); |
| else if (!strcmp(state, "AUTHENTICATING")) |
| return tr("Authenticating"); |
| else if (!strcmp(state, "ASSOCIATING")) |
| return tr("Associating"); |
| else if (!strcmp(state, "ASSOCIATED")) |
| return tr("Associated"); |
| else if (!strcmp(state, "4WAY_HANDSHAKE")) |
| return tr("4-Way Handshake"); |
| else if (!strcmp(state, "GROUP_HANDSHAKE")) |
| return tr("Group Handshake"); |
| else if (!strcmp(state, "COMPLETED")) |
| return tr("Completed"); |
| else |
| return tr("Unknown"); |
| } |
| |
| |
| void WpaGui::updateStatus() |
| { |
| char buf[2048], *start, *end, *pos; |
| size_t len; |
| |
| pingsToStatusUpdate = 10; |
| |
| len = sizeof(buf) - 1; |
| if (ctrl_conn == NULL || ctrlRequest("STATUS", buf, &len) < 0) { |
| textStatus->setText(tr("Could not get status from " |
| "wpa_supplicant")); |
| textAuthentication->clear(); |
| textEncryption->clear(); |
| textSsid->clear(); |
| textBssid->clear(); |
| textIpAddress->clear(); |
| updateTrayToolTip(tr("no status information")); |
| |
| #ifdef CONFIG_NATIVE_WINDOWS |
| static bool first = true; |
| if (first && connectedToService && |
| (ctrl_iface == NULL || *ctrl_iface == '\0')) { |
| first = false; |
| if (QMessageBox::information( |
| this, qAppName(), |
| tr("No network interfaces in use.\n" |
| "Would you like to add one?"), |
| QMessageBox::Yes | QMessageBox::No) == |
| QMessageBox::Yes) |
| addInterface(); |
| } |
| #endif /* CONFIG_NATIVE_WINDOWS */ |
| return; |
| } |
| |
| buf[len] = '\0'; |
| |
| bool auth_updated = false, ssid_updated = false; |
| bool bssid_updated = false, ipaddr_updated = false; |
| bool status_updated = false; |
| char *pairwise_cipher = NULL, *group_cipher = NULL; |
| char *mode = NULL; |
| |
| start = buf; |
| while (*start) { |
| bool last = false; |
| end = strchr(start, '\n'); |
| if (end == NULL) { |
| last = true; |
| end = start; |
| while (end[0] && end[1]) |
| end++; |
| } |
| *end = '\0'; |
| |
| pos = strchr(start, '='); |
| if (pos) { |
| *pos++ = '\0'; |
| if (strcmp(start, "bssid") == 0) { |
| bssid_updated = true; |
| textBssid->setText(pos); |
| } else if (strcmp(start, "ssid") == 0) { |
| ssid_updated = true; |
| textSsid->setText(pos); |
| updateTrayToolTip(pos + tr(" (associated)")); |
| } else if (strcmp(start, "ip_address") == 0) { |
| ipaddr_updated = true; |
| textIpAddress->setText(pos); |
| } else if (strcmp(start, "wpa_state") == 0) { |
| status_updated = true; |
| textStatus->setText(wpaStateTranslate(pos)); |
| } else if (strcmp(start, "key_mgmt") == 0) { |
| auth_updated = true; |
| textAuthentication->setText(pos); |
| /* TODO: could add EAP status to this */ |
| } else if (strcmp(start, "pairwise_cipher") == 0) { |
| pairwise_cipher = pos; |
| } else if (strcmp(start, "group_cipher") == 0) { |
| group_cipher = pos; |
| } else if (strcmp(start, "mode") == 0) { |
| mode = pos; |
| } |
| } |
| |
| if (last) |
| break; |
| start = end + 1; |
| } |
| if (status_updated && mode) |
| textStatus->setText(textStatus->text() + " (" + mode + ")"); |
| |
| if (pairwise_cipher || group_cipher) { |
| QString encr; |
| if (pairwise_cipher && group_cipher && |
| strcmp(pairwise_cipher, group_cipher) != 0) { |
| encr.append(pairwise_cipher); |
| encr.append(" + "); |
| encr.append(group_cipher); |
| } else if (pairwise_cipher) { |
| encr.append(pairwise_cipher); |
| } else { |
| encr.append(group_cipher); |
| encr.append(" [group key only]"); |
| } |
| textEncryption->setText(encr); |
| } else |
| textEncryption->clear(); |
| |
| if (!status_updated) |
| textStatus->clear(); |
| if (!auth_updated) |
| textAuthentication->clear(); |
| if (!ssid_updated) { |
| textSsid->clear(); |
| updateTrayToolTip(tr("(not-associated)")); |
| } |
| if (!bssid_updated) |
| textBssid->clear(); |
| if (!ipaddr_updated) |
| textIpAddress->clear(); |
| } |
| |
| |
| void WpaGui::updateNetworks() |
| { |
| char buf[2048], *start, *end, *id, *ssid, *bssid, *flags; |
| size_t len; |
| int first_active = -1; |
| int was_selected = -1; |
| bool current = false; |
| |
| if (!networkMayHaveChanged) |
| return; |
| |
| if (networkList->currentRow() >= 0) |
| was_selected = networkList->currentRow(); |
| |
| networkSelect->clear(); |
| networkList->clear(); |
| |
| if (ctrl_conn == NULL) |
| return; |
| |
| len = sizeof(buf) - 1; |
| if (ctrlRequest("LIST_NETWORKS", buf, &len) < 0) |
| return; |
| |
| buf[len] = '\0'; |
| start = strchr(buf, '\n'); |
| if (start == NULL) |
| return; |
| start++; |
| |
| while (*start) { |
| bool last = false; |
| end = strchr(start, '\n'); |
| if (end == NULL) { |
| last = true; |
| end = start; |
| while (end[0] && end[1]) |
| end++; |
| } |
| *end = '\0'; |
| |
| id = start; |
| ssid = strchr(id, '\t'); |
| if (ssid == NULL) |
| break; |
| *ssid++ = '\0'; |
| bssid = strchr(ssid, '\t'); |
| if (bssid == NULL) |
| break; |
| *bssid++ = '\0'; |
| flags = strchr(bssid, '\t'); |
| if (flags == NULL) |
| break; |
| *flags++ = '\0'; |
| |
| if (strstr(flags, "[DISABLED][P2P-PERSISTENT]")) { |
| if (last) |
| break; |
| start = end + 1; |
| continue; |
| } |
| |
| QString network(id); |
| network.append(": "); |
| network.append(ssid); |
| networkSelect->addItem(network); |
| networkList->addItem(network); |
| |
| if (strstr(flags, "[CURRENT]")) { |
| networkSelect->setCurrentIndex(networkSelect->count() - |
| 1); |
| current = true; |
| } else if (first_active < 0 && |
| strstr(flags, "[DISABLED]") == NULL) |
| first_active = networkSelect->count() - 1; |
| |
| if (last) |
| break; |
| start = end + 1; |
| } |
| |
| if (networkSelect->count() > 1) |
| networkSelect->addItem(tr("Select any network")); |
| |
| if (!current && first_active >= 0) |
| networkSelect->setCurrentIndex(first_active); |
| |
| if (was_selected >= 0 && networkList->count() > 0) { |
| if (was_selected < networkList->count()) |
| networkList->setCurrentRow(was_selected); |
| else |
| networkList->setCurrentRow(networkList->count() - 1); |
| } |
| else |
| networkList->setCurrentRow(networkSelect->currentIndex()); |
| |
| networkMayHaveChanged = false; |
| } |
| |
| |
| void WpaGui::helpIndex() |
| { |
| debug("helpIndex"); |
| } |
| |
| |
| void WpaGui::helpContents() |
| { |
| debug("helpContents"); |
| } |
| |
| |
| void WpaGui::helpAbout() |
| { |
| QMessageBox::about(this, "wpa_gui for wpa_supplicant", |
| "Copyright (c) 2003-2013,\n" |
| "Jouni Malinen <j@w1.fi>\n" |
| "and contributors.\n" |
| "\n" |
| "This software may be distributed under\n" |
| "the terms of the BSD license.\n" |
| "See README for more details.\n" |
| "\n" |
| "This product includes software developed\n" |
| "by the OpenSSL Project for use in the\n" |
| "OpenSSL Toolkit (http://www.openssl.org/)\n"); |
| } |
| |
| |
| void WpaGui::disconnect() |
| { |
| char reply[10]; |
| size_t reply_len = sizeof(reply); |
| ctrlRequest("DISCONNECT", reply, &reply_len); |
| stopWpsRun(false); |
| } |
| |
| |
| void WpaGui::scan() |
| { |
| if (scanres) { |
| scanres->close(); |
| delete scanres; |
| } |
| |
| scanres = new ScanResults(); |
| if (scanres == NULL) |
| return; |
| scanres->setWpaGui(this); |
| scanres->show(); |
| scanres->exec(); |
| } |
| |
| |
| void WpaGui::eventHistory() |
| { |
| if (eh) { |
| eh->close(); |
| delete eh; |
| } |
| |
| eh = new EventHistory(); |
| if (eh == NULL) |
| return; |
| eh->addEvents(msgs); |
| eh->show(); |
| eh->exec(); |
| } |
| |
| |
| void WpaGui::ping() |
| { |
| char buf[10]; |
| size_t len; |
| |
| #ifdef CONFIG_CTRL_IFACE_NAMED_PIPE |
| /* |
| * QSocketNotifier cannot be used with Windows named pipes, so use a |
| * timer to check for received messages for now. This could be |
| * optimized be doing something specific to named pipes or Windows |
| * events, but it is not clear what would be the best way of doing that |
| * in Qt. |
| */ |
| receiveMsgs(); |
| #endif /* CONFIG_CTRL_IFACE_NAMED_PIPE */ |
| |
| if (scanres && !scanres->isVisible()) { |
| delete scanres; |
| scanres = NULL; |
| } |
| |
| if (eh && !eh->isVisible()) { |
| delete eh; |
| eh = NULL; |
| } |
| |
| if (udr && !udr->isVisible()) { |
| delete udr; |
| udr = NULL; |
| } |
| |
| len = sizeof(buf) - 1; |
| if (ctrlRequest("PING", buf, &len) < 0) { |
| debug("PING failed - trying to reconnect"); |
| if (openCtrlConnection(ctrl_iface) >= 0) { |
| debug("Reconnected successfully"); |
| pingsToStatusUpdate = 0; |
| } |
| } |
| |
| pingsToStatusUpdate--; |
| if (pingsToStatusUpdate <= 0) { |
| updateStatus(); |
| updateNetworks(); |
| } |
| |
| #ifndef CONFIG_CTRL_IFACE_NAMED_PIPE |
| /* Use less frequent pings and status updates when the main window is |
| * hidden (running in taskbar). */ |
| int interval = isHidden() ? 5000 : 1000; |
| if (timer->interval() != interval) |
| timer->setInterval(interval); |
| #endif /* CONFIG_CTRL_IFACE_NAMED_PIPE */ |
| } |
| |
| |
| static int str_match(const char *a, const char *b) |
| { |
| return strncmp(a, b, strlen(b)) == 0; |
| } |
| |
| |
| void WpaGui::processMsg(char *msg) |
| { |
| char *pos = msg, *pos2; |
| int priority = 2; |
| |
| if (*pos == '<') { |
| /* skip priority */ |
| pos++; |
| priority = atoi(pos); |
| pos = strchr(pos, '>'); |
| if (pos) |
| pos++; |
| else |
| pos = msg; |
| } |
| |
| WpaMsg wm(pos, priority); |
| if (eh) |
| eh->addEvent(wm); |
| if (peers) |
| peers->event_notify(wm); |
| msgs.append(wm); |
| while (msgs.count() > 100) |
| msgs.pop_front(); |
| |
| /* Update last message with truncated version of the event */ |
| if (strncmp(pos, "CTRL-", 5) == 0) { |
| pos2 = strchr(pos, str_match(pos, WPA_CTRL_REQ) ? ':' : ' '); |
| if (pos2) |
| pos2++; |
| else |
| pos2 = pos; |
| } else |
| pos2 = pos; |
| QString lastmsg = pos2; |
| lastmsg.truncate(40); |
| textLastMessage->setText(lastmsg); |
| |
| pingsToStatusUpdate = 0; |
| networkMayHaveChanged = true; |
| |
| if (str_match(pos, WPA_CTRL_REQ)) |
| processCtrlReq(pos + strlen(WPA_CTRL_REQ)); |
| else if (str_match(pos, WPA_EVENT_SCAN_RESULTS) && scanres) |
| scanres->updateResults(); |
| else if (str_match(pos, WPA_EVENT_DISCONNECTED)) |
| showTrayMessage(QSystemTrayIcon::Information, 3, |
| tr("Disconnected from network.")); |
| else if (str_match(pos, WPA_EVENT_CONNECTED)) { |
| showTrayMessage(QSystemTrayIcon::Information, 3, |
| tr("Connection to network established.")); |
| QTimer::singleShot(5 * 1000, this, SLOT(showTrayStatus())); |
| stopWpsRun(true); |
| } else if (str_match(pos, WPS_EVENT_AP_AVAILABLE_PBC)) { |
| wpsStatusText->setText(tr("WPS AP in active PBC mode found")); |
| if (textStatus->text() == "INACTIVE" || |
| textStatus->text() == "DISCONNECTED") |
| wpaguiTab->setCurrentWidget(wpsTab); |
| wpsInstructions->setText(tr("Press the PBC button on the " |
| "screen to start registration")); |
| } else if (str_match(pos, WPS_EVENT_AP_AVAILABLE_PIN)) { |
| wpsStatusText->setText(tr("WPS AP with recently selected " |
| "registrar")); |
| if (textStatus->text() == "INACTIVE" || |
| textStatus->text() == "DISCONNECTED") |
| wpaguiTab->setCurrentWidget(wpsTab); |
| } else if (str_match(pos, WPS_EVENT_AP_AVAILABLE_AUTH)) { |
| showTrayMessage(QSystemTrayIcon::Information, 3, |
| "Wi-Fi Protected Setup (WPS) AP\n" |
| "indicating this client is authorized."); |
| wpsStatusText->setText("WPS AP indicating this client is " |
| "authorized"); |
| if (textStatus->text() == "INACTIVE" || |
| textStatus->text() == "DISCONNECTED") |
| wpaguiTab->setCurrentWidget(wpsTab); |
| } else if (str_match(pos, WPS_EVENT_AP_AVAILABLE)) { |
| wpsStatusText->setText(tr("WPS AP detected")); |
| } else if (str_match(pos, WPS_EVENT_OVERLAP)) { |
| wpsStatusText->setText(tr("PBC mode overlap detected")); |
| wpsInstructions->setText(tr("More than one AP is currently in " |
| "active WPS PBC mode. Wait couple " |
| "of minutes and try again")); |
| wpaguiTab->setCurrentWidget(wpsTab); |
| } else if (str_match(pos, WPS_EVENT_CRED_RECEIVED)) { |
| wpsStatusText->setText(tr("Network configuration received")); |
| wpaguiTab->setCurrentWidget(wpsTab); |
| } else if (str_match(pos, WPA_EVENT_EAP_METHOD)) { |
| if (strstr(pos, "(WSC)")) |
| wpsStatusText->setText(tr("Registration started")); |
| } else if (str_match(pos, WPS_EVENT_M2D)) { |
| wpsStatusText->setText(tr("Registrar does not yet know PIN")); |
| } else if (str_match(pos, WPS_EVENT_FAIL)) { |
| wpsStatusText->setText(tr("Registration failed")); |
| } else if (str_match(pos, WPS_EVENT_SUCCESS)) { |
| wpsStatusText->setText(tr("Registration succeeded")); |
| } |
| } |
| |
| |
| void WpaGui::processCtrlReq(const char *req) |
| { |
| if (udr) { |
| udr->close(); |
| delete udr; |
| } |
| udr = new UserDataRequest(); |
| if (udr == NULL) |
| return; |
| if (udr->setParams(this, req) < 0) { |
| delete udr; |
| udr = NULL; |
| return; |
| } |
| udr->show(); |
| udr->exec(); |
| } |
| |
| |
| void WpaGui::receiveMsgs() |
| { |
| char buf[256]; |
| size_t len; |
| |
| while (monitor_conn && wpa_ctrl_pending(monitor_conn) > 0) { |
| len = sizeof(buf) - 1; |
| if (wpa_ctrl_recv(monitor_conn, buf, &len) == 0) { |
| buf[len] = '\0'; |
| processMsg(buf); |
| } |
| } |
| } |
| |
| |
| void WpaGui::connectB() |
| { |
| char reply[10]; |
| size_t reply_len = sizeof(reply); |
| ctrlRequest("REASSOCIATE", reply, &reply_len); |
| } |
| |
| |
| void WpaGui::selectNetwork( const QString &sel ) |
| { |
| QString cmd(sel); |
| char reply[10]; |
| size_t reply_len = sizeof(reply); |
| |
| if (cmd.contains(QRegExp("^\\d+:"))) |
| cmd.truncate(cmd.indexOf(':')); |
| else |
| cmd = "any"; |
| cmd.prepend("SELECT_NETWORK "); |
| ctrlRequest(cmd.toAscii().constData(), reply, &reply_len); |
| triggerUpdate(); |
| stopWpsRun(false); |
| } |
| |
| |
| void WpaGui::enableNetwork(const QString &sel) |
| { |
| QString cmd(sel); |
| char reply[10]; |
| size_t reply_len = sizeof(reply); |
| |
| if (cmd.contains(QRegExp("^\\d+:"))) |
| cmd.truncate(cmd.indexOf(':')); |
| else if (!cmd.startsWith("all")) { |
| debug("Invalid editNetwork '%s'", |
| cmd.toAscii().constData()); |
| return; |
| } |
| cmd.prepend("ENABLE_NETWORK "); |
| ctrlRequest(cmd.toAscii().constData(), reply, &reply_len); |
| triggerUpdate(); |
| } |
| |
| |
| void WpaGui::disableNetwork(const QString &sel) |
| { |
| QString cmd(sel); |
| char reply[10]; |
| size_t reply_len = sizeof(reply); |
| |
| if (cmd.contains(QRegExp("^\\d+:"))) |
| cmd.truncate(cmd.indexOf(':')); |
| else if (!cmd.startsWith("all")) { |
| debug("Invalid editNetwork '%s'", |
| cmd.toAscii().constData()); |
| return; |
| } |
| cmd.prepend("DISABLE_NETWORK "); |
| ctrlRequest(cmd.toAscii().constData(), reply, &reply_len); |
| triggerUpdate(); |
| } |
| |
| |
| void WpaGui::editNetwork(const QString &sel) |
| { |
| QString cmd(sel); |
| int id = -1; |
| |
| if (cmd.contains(QRegExp("^\\d+:"))) { |
| cmd.truncate(cmd.indexOf(':')); |
| id = cmd.toInt(); |
| } |
| |
| NetworkConfig *nc = new NetworkConfig(); |
| if (nc == NULL) |
| return; |
| nc->setWpaGui(this); |
| |
| if (id >= 0) |
| nc->paramsFromConfig(id); |
| else |
| nc->newNetwork(); |
| |
| nc->show(); |
| nc->exec(); |
| } |
| |
| |
| void WpaGui::editSelectedNetwork() |
| { |
| if (networkSelect->count() < 1) { |
| QMessageBox::information( |
| this, tr("No Networks"), |
| tr("There are no networks to edit.\n")); |
| return; |
| } |
| QString sel(networkSelect->currentText()); |
| editNetwork(sel); |
| } |
| |
| |
| void WpaGui::editListedNetwork() |
| { |
| if (networkList->currentRow() < 0) { |
| QMessageBox::information(this, tr("Select A Network"), |
| tr("Select a network from the list to" |
| " edit it.\n")); |
| return; |
| } |
| QString sel(networkList->currentItem()->text()); |
| editNetwork(sel); |
| } |
| |
| |
| void WpaGui::triggerUpdate() |
| { |
| updateStatus(); |
| networkMayHaveChanged = true; |
| updateNetworks(); |
| } |
| |
| |
| void WpaGui::addNetwork() |
| { |
| NetworkConfig *nc = new NetworkConfig(); |
| if (nc == NULL) |
| return; |
| nc->setWpaGui(this); |
| nc->newNetwork(); |
| nc->show(); |
| nc->exec(); |
| } |
| |
| |
| void WpaGui::removeNetwork(const QString &sel) |
| { |
| QString cmd(sel); |
| char reply[10]; |
| size_t reply_len = sizeof(reply); |
| |
| if (cmd.contains(QRegExp("^\\d+:"))) |
| cmd.truncate(cmd.indexOf(':')); |
| else if (!cmd.startsWith("all")) { |
| debug("Invalid editNetwork '%s'", |
| cmd.toAscii().constData()); |
| return; |
| } |
| cmd.prepend("REMOVE_NETWORK "); |
| ctrlRequest(cmd.toAscii().constData(), reply, &reply_len); |
| triggerUpdate(); |
| } |
| |
| |
| void WpaGui::removeSelectedNetwork() |
| { |
| if (networkSelect->count() < 1) { |
| QMessageBox::information(this, tr("No Networks"), |
| tr("There are no networks to remove." |
| "\n")); |
| return; |
| } |
| QString sel(networkSelect->currentText()); |
| removeNetwork(sel); |
| } |
| |
| |
| void WpaGui::removeListedNetwork() |
| { |
| if (networkList->currentRow() < 0) { |
| QMessageBox::information(this, tr("Select A Network"), |
| tr("Select a network from the list " |
| "to remove it.\n")); |
| return; |
| } |
| QString sel(networkList->currentItem()->text()); |
| removeNetwork(sel); |
| } |
| |
| |
| void WpaGui::enableAllNetworks() |
| { |
| QString sel("all"); |
| enableNetwork(sel); |
| } |
| |
| |
| void WpaGui::disableAllNetworks() |
| { |
| QString sel("all"); |
| disableNetwork(sel); |
| } |
| |
| |
| void WpaGui::removeAllNetworks() |
| { |
| QString sel("all"); |
| removeNetwork(sel); |
| } |
| |
| |
| int WpaGui::getNetworkDisabled(const QString &sel) |
| { |
| QString cmd(sel); |
| char reply[10]; |
| size_t reply_len = sizeof(reply) - 1; |
| int pos = cmd.indexOf(':'); |
| if (pos < 0) { |
| debug("Invalid getNetworkDisabled '%s'", |
| cmd.toAscii().constData()); |
| return -1; |
| } |
| cmd.truncate(pos); |
| cmd.prepend("GET_NETWORK "); |
| cmd.append(" disabled"); |
| |
| if (ctrlRequest(cmd.toAscii().constData(), reply, &reply_len) >= 0 |
| && reply_len >= 1) { |
| reply[reply_len] = '\0'; |
| if (!str_match(reply, "FAIL")) |
| return atoi(reply); |
| } |
| |
| return -1; |
| } |
| |
| |
| void WpaGui::updateNetworkDisabledStatus() |
| { |
| if (networkList->currentRow() < 0) |
| return; |
| |
| QString sel(networkList->currentItem()->text()); |
| |
| switch (getNetworkDisabled(sel)) { |
| case 0: |
| if (!enableRadioButton->isChecked()) |
| enableRadioButton->setChecked(true); |
| return; |
| case 1: |
| if (!disableRadioButton->isChecked()) |
| disableRadioButton->setChecked(true); |
| return; |
| } |
| } |
| |
| |
| void WpaGui::enableListedNetwork(bool enabled) |
| { |
| if (networkList->currentRow() < 0 || !enabled) |
| return; |
| |
| QString sel(networkList->currentItem()->text()); |
| |
| if (getNetworkDisabled(sel) == 1) |
| enableNetwork(sel); |
| } |
| |
| |
| void WpaGui::disableListedNetwork(bool disabled) |
| { |
| if (networkList->currentRow() < 0 || !disabled) |
| return; |
| |
| QString sel(networkList->currentItem()->text()); |
| |
| if (getNetworkDisabled(sel) == 0) |
| disableNetwork(sel); |
| } |
| |
| |
| void WpaGui::saveConfig() |
| { |
| char buf[10]; |
| size_t len; |
| |
| len = sizeof(buf) - 1; |
| ctrlRequest("SAVE_CONFIG", buf, &len); |
| |
| buf[len] = '\0'; |
| |
| if (str_match(buf, "FAIL")) |
| QMessageBox::warning( |
| this, tr("Failed to save configuration"), |
| tr("The configuration could not be saved.\n" |
| "\n" |
| "The update_config=1 configuration option\n" |
| "must be used for configuration saving to\n" |
| "be permitted.\n")); |
| else |
| QMessageBox::information( |
| this, tr("Saved configuration"), |
| tr("The current configuration was saved." |
| "\n")); |
| } |
| |
| |
| void WpaGui::selectAdapter( const QString & sel ) |
| { |
| if (openCtrlConnection(sel.toAscii().constData()) < 0) |
| debug("Failed to open control connection to " |
| "wpa_supplicant."); |
| updateStatus(); |
| updateNetworks(); |
| } |
| |
| |
| void WpaGui::createTrayIcon(bool trayOnly) |
| { |
| QApplication::setQuitOnLastWindowClosed(false); |
| |
| tray_icon = new QSystemTrayIcon(this); |
| if (QImageReader::supportedImageFormats().contains(QByteArray("svg"))) |
| tray_icon->setIcon(QIcon(":/icons/wpa_gui.svg")); |
| else |
| tray_icon->setIcon(QIcon(":/icons/wpa_gui.png")); |
| |
| connect(tray_icon, |
| SIGNAL(activated(QSystemTrayIcon::ActivationReason)), |
| this, SLOT(trayActivated(QSystemTrayIcon::ActivationReason))); |
| |
| ackTrayIcon = false; |
| |
| tray_menu = new QMenu(this); |
| |
| disconnectAction = new QAction(tr("&Disconnect"), this); |
| reconnectAction = new QAction(tr("Re&connect"), this); |
| connect(disconnectAction, SIGNAL(triggered()), this, |
| SLOT(disconnect())); |
| connect(reconnectAction, SIGNAL(triggered()), this, |
| SLOT(connectB())); |
| tray_menu->addAction(disconnectAction); |
| tray_menu->addAction(reconnectAction); |
| tray_menu->addSeparator(); |
| |
| eventAction = new QAction(tr("&Event History"), this); |
| scanAction = new QAction(tr("Scan &Results"), this); |
| statAction = new QAction(tr("S&tatus"), this); |
| connect(eventAction, SIGNAL(triggered()), this, SLOT(eventHistory())); |
| connect(scanAction, SIGNAL(triggered()), this, SLOT(scan())); |
| connect(statAction, SIGNAL(triggered()), this, SLOT(showTrayStatus())); |
| tray_menu->addAction(eventAction); |
| tray_menu->addAction(scanAction); |
| tray_menu->addAction(statAction); |
| tray_menu->addSeparator(); |
| |
| showAction = new QAction(tr("&Show Window"), this); |
| hideAction = new QAction(tr("&Hide Window"), this); |
| quitAction = new QAction(tr("&Quit"), this); |
| connect(showAction, SIGNAL(triggered()), this, SLOT(show())); |
| connect(hideAction, SIGNAL(triggered()), this, SLOT(hide())); |
| connect(quitAction, SIGNAL(triggered()), qApp, SLOT(quit())); |
| tray_menu->addAction(showAction); |
| tray_menu->addAction(hideAction); |
| tray_menu->addSeparator(); |
| tray_menu->addAction(quitAction); |
| |
| tray_icon->setContextMenu(tray_menu); |
| |
| tray_icon->show(); |
| |
| if (!trayOnly) |
| show(); |
| inTray = trayOnly; |
| } |
| |
| |
| void WpaGui::showTrayMessage(QSystemTrayIcon::MessageIcon type, int sec, |
| const QString & msg) |
| { |
| if (!QSystemTrayIcon::supportsMessages()) |
| return; |
| |
| if (isVisible() || !tray_icon || !tray_icon->isVisible() || quietMode) |
| return; |
| |
| tray_icon->showMessage(qAppName(), msg, type, sec * 1000); |
| } |
| |
| |
| void WpaGui::trayActivated(QSystemTrayIcon::ActivationReason how) |
| { |
| switch (how) { |
| /* use close() here instead of hide() and allow the |
| * custom closeEvent handler take care of children */ |
| case QSystemTrayIcon::Trigger: |
| ackTrayIcon = true; |
| if (isVisible()) { |
| close(); |
| inTray = true; |
| } else { |
| show(); |
| inTray = false; |
| } |
| break; |
| case QSystemTrayIcon::MiddleClick: |
| showTrayStatus(); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| |
| void WpaGui::showTrayStatus() |
| { |
| char buf[2048]; |
| size_t len; |
| |
| len = sizeof(buf) - 1; |
| if (ctrlRequest("STATUS", buf, &len) < 0) |
| return; |
| buf[len] = '\0'; |
| |
| QString msg, status(buf); |
| |
| QStringList lines = status.split(QRegExp("\\n")); |
| for (QStringList::Iterator it = lines.begin(); |
| it != lines.end(); it++) { |
| int pos = (*it).indexOf('=') + 1; |
| if (pos < 1) |
| continue; |
| |
| if ((*it).startsWith("bssid=")) |
| msg.append("BSSID:\t" + (*it).mid(pos) + "\n"); |
| else if ((*it).startsWith("ssid=")) |
| msg.append("SSID: \t" + (*it).mid(pos) + "\n"); |
| else if ((*it).startsWith("pairwise_cipher=")) |
| msg.append("PAIR: \t" + (*it).mid(pos) + "\n"); |
| else if ((*it).startsWith("group_cipher=")) |
| msg.append("GROUP:\t" + (*it).mid(pos) + "\n"); |
| else if ((*it).startsWith("key_mgmt=")) |
| msg.append("AUTH: \t" + (*it).mid(pos) + "\n"); |
| else if ((*it).startsWith("wpa_state=")) |
| msg.append("STATE:\t" + (*it).mid(pos) + "\n"); |
| else if ((*it).startsWith("ip_address=")) |
| msg.append("IP: \t" + (*it).mid(pos) + "\n"); |
| else if ((*it).startsWith("Supplicant PAE state=")) |
| msg.append("PAE: \t" + (*it).mid(pos) + "\n"); |
| else if ((*it).startsWith("EAP state=")) |
| msg.append("EAP: \t" + (*it).mid(pos) + "\n"); |
| } |
| |
| if (!msg.isEmpty()) |
| showTrayMessage(QSystemTrayIcon::Information, 10, msg); |
| } |
| |
| |
| void WpaGui::updateTrayToolTip(const QString &msg) |
| { |
| if (tray_icon) |
| tray_icon->setToolTip(msg); |
| } |
| |
| |
| void WpaGui::closeEvent(QCloseEvent *event) |
| { |
| if (eh) { |
| eh->close(); |
| delete eh; |
| eh = NULL; |
| } |
| |
| if (scanres) { |
| scanres->close(); |
| delete scanres; |
| scanres = NULL; |
| } |
| |
| if (peers) { |
| peers->close(); |
| delete peers; |
| peers = NULL; |
| } |
| |
| if (udr) { |
| udr->close(); |
| delete udr; |
| udr = NULL; |
| } |
| |
| if (tray_icon && !ackTrayIcon) { |
| /* give user a visual hint that the tray icon exists */ |
| if (QSystemTrayIcon::supportsMessages()) { |
| hide(); |
| showTrayMessage(QSystemTrayIcon::Information, 3, |
| qAppName() + |
| tr(" will keep running in " |
| "the system tray.")); |
| } else { |
| QMessageBox::information(this, qAppName() + |
| tr(" systray"), |
| tr("The program will keep " |
| "running in the system " |
| "tray.")); |
| } |
| ackTrayIcon = true; |
| } |
| |
| event->accept(); |
| } |
| |
| |
| void WpaGui::wpsDialog() |
| { |
| wpaguiTab->setCurrentWidget(wpsTab); |
| } |
| |
| |
| void WpaGui::peersDialog() |
| { |
| if (peers) { |
| peers->close(); |
| delete peers; |
| } |
| |
| peers = new Peers(); |
| if (peers == NULL) |
| return; |
| peers->setWpaGui(this); |
| peers->show(); |
| peers->exec(); |
| } |
| |
| |
| void WpaGui::tabChanged(int index) |
| { |
| if (index != 2) |
| return; |
| |
| if (wpsRunning) |
| return; |
| |
| wpsApPinEdit->setEnabled(!bssFromScan.isEmpty()); |
| if (bssFromScan.isEmpty()) |
| wpsApPinButton->setEnabled(false); |
| } |
| |
| |
| void WpaGui::wpsPbc() |
| { |
| char reply[20]; |
| size_t reply_len = sizeof(reply); |
| |
| if (ctrlRequest("WPS_PBC", reply, &reply_len) < 0) |
| return; |
| |
| wpsPinEdit->setEnabled(false); |
| if (wpsStatusText->text().compare(tr("WPS AP in active PBC mode found"))) { |
| wpsInstructions->setText(tr("Press the push button on the AP to " |
| "start the PBC mode.")); |
| } else { |
| wpsInstructions->setText(tr("If you have not yet done so, press " |
| "the push button on the AP to start " |
| "the PBC mode.")); |
| } |
| wpsStatusText->setText(tr("Waiting for Registrar")); |
| wpsRunning = true; |
| } |
| |
| |
| void WpaGui::wpsGeneratePin() |
| { |
| char reply[20]; |
| size_t reply_len = sizeof(reply) - 1; |
| |
| if (ctrlRequest("WPS_PIN any", reply, &reply_len) < 0) |
| return; |
| |
| reply[reply_len] = '\0'; |
| |
| wpsPinEdit->setText(reply); |
| wpsPinEdit->setEnabled(true); |
| wpsInstructions->setText(tr("Enter the generated PIN into the Registrar " |
| "(either the internal one in the AP or an " |
| "external one).")); |
| wpsStatusText->setText(tr("Waiting for Registrar")); |
| wpsRunning = true; |
| } |
| |
| |
| void WpaGui::setBssFromScan(const QString &bssid) |
| { |
| bssFromScan = bssid; |
| wpsApPinEdit->setEnabled(!bssFromScan.isEmpty()); |
| wpsApPinButton->setEnabled(wpsApPinEdit->text().length() == 8); |
| wpsStatusText->setText(tr("WPS AP selected from scan results")); |
| wpsInstructions->setText(tr("If you want to use an AP device PIN, e.g., " |
| "from a label in the device, enter the eight " |
| "digit AP PIN and click Use AP PIN button.")); |
| } |
| |
| |
| void WpaGui::wpsApPinChanged(const QString &text) |
| { |
| wpsApPinButton->setEnabled(text.length() == 8); |
| } |
| |
| |
| void WpaGui::wpsApPin() |
| { |
| char reply[20]; |
| size_t reply_len = sizeof(reply); |
| |
| QString cmd("WPS_REG " + bssFromScan + " " + wpsApPinEdit->text()); |
| if (ctrlRequest(cmd.toAscii().constData(), reply, &reply_len) < 0) |
| return; |
| |
| wpsStatusText->setText(tr("Waiting for AP/Enrollee")); |
| wpsRunning = true; |
| } |
| |
| |
| void WpaGui::stopWpsRun(bool success) |
| { |
| if (wpsRunning) |
| wpsStatusText->setText(success ? tr("Connected to the network") : |
| tr("Stopped")); |
| else |
| wpsStatusText->setText(""); |
| wpsPinEdit->setEnabled(false); |
| wpsInstructions->setText(""); |
| wpsRunning = false; |
| bssFromScan = ""; |
| wpsApPinEdit->setEnabled(false); |
| wpsApPinButton->setEnabled(false); |
| } |
| |
| |
| #ifdef CONFIG_NATIVE_WINDOWS |
| |
| #ifndef WPASVC_NAME |
| #define WPASVC_NAME TEXT("wpasvc") |
| #endif |
| |
| class ErrorMsg : public QMessageBox { |
| public: |
| ErrorMsg(QWidget *parent, DWORD last_err = GetLastError()); |
| void showMsg(QString msg); |
| private: |
| DWORD err; |
| }; |
| |
| ErrorMsg::ErrorMsg(QWidget *parent, DWORD last_err) : |
| QMessageBox(parent), err(last_err) |
| { |
| setWindowTitle(tr("wpa_gui error")); |
| setIcon(QMessageBox::Warning); |
| } |
| |
| void ErrorMsg::showMsg(QString msg) |
| { |
| LPTSTR buf; |
| |
| setText(msg); |
| if (FormatMessage(FORMAT_MESSAGE_ALLOCATE_BUFFER | |
| FORMAT_MESSAGE_FROM_SYSTEM, |
| NULL, err, 0, (LPTSTR) (void *) &buf, |
| 0, NULL) > 0) { |
| QString msg = QString::fromWCharArray(buf); |
| setInformativeText(QString("[%1] %2").arg(err).arg(msg)); |
| LocalFree(buf); |
| } else { |
| setInformativeText(QString("[%1]").arg(err)); |
| } |
| |
| exec(); |
| } |
| |
| |
| void WpaGui::startService() |
| { |
| SC_HANDLE svc, scm; |
| |
| scm = OpenSCManager(0, 0, SC_MANAGER_CONNECT); |
| if (!scm) { |
| ErrorMsg(this).showMsg(tr("OpenSCManager failed")); |
| return; |
| } |
| |
| svc = OpenService(scm, WPASVC_NAME, SERVICE_START); |
| if (!svc) { |
| ErrorMsg(this).showMsg(tr("OpenService failed")); |
| CloseServiceHandle(scm); |
| return; |
| } |
| |
| if (!StartService(svc, 0, NULL)) { |
| ErrorMsg(this).showMsg(tr("Failed to start wpa_supplicant " |
| "service")); |
| } |
| |
| CloseServiceHandle(svc); |
| CloseServiceHandle(scm); |
| } |
| |
| |
| void WpaGui::stopService() |
| { |
| SC_HANDLE svc, scm; |
| SERVICE_STATUS status; |
| |
| scm = OpenSCManager(0, 0, SC_MANAGER_CONNECT); |
| if (!scm) { |
| ErrorMsg(this).showMsg(tr("OpenSCManager failed")); |
| return; |
| } |
| |
| svc = OpenService(scm, WPASVC_NAME, SERVICE_STOP); |
| if (!svc) { |
| ErrorMsg(this).showMsg(tr("OpenService failed")); |
| CloseServiceHandle(scm); |
| return; |
| } |
| |
| if (!ControlService(svc, SERVICE_CONTROL_STOP, &status)) { |
| ErrorMsg(this).showMsg(tr("Failed to stop wpa_supplicant " |
| "service")); |
| } |
| |
| CloseServiceHandle(svc); |
| CloseServiceHandle(scm); |
| } |
| |
| |
| bool WpaGui::serviceRunning() |
| { |
| SC_HANDLE svc, scm; |
| SERVICE_STATUS status; |
| bool running = false; |
| |
| scm = OpenSCManager(0, 0, SC_MANAGER_CONNECT); |
| if (!scm) { |
| debug("OpenSCManager failed: %d", (int) GetLastError()); |
| return false; |
| } |
| |
| svc = OpenService(scm, WPASVC_NAME, SERVICE_QUERY_STATUS); |
| if (!svc) { |
| debug("OpenService failed: %d", (int) GetLastError()); |
| CloseServiceHandle(scm); |
| return false; |
| } |
| |
| if (QueryServiceStatus(svc, &status)) { |
| if (status.dwCurrentState != SERVICE_STOPPED) |
| running = true; |
| } |
| |
| CloseServiceHandle(svc); |
| CloseServiceHandle(scm); |
| |
| return running; |
| } |
| |
| #endif /* CONFIG_NATIVE_WINDOWS */ |
| |
| |
| void WpaGui::addInterface() |
| { |
| if (add_iface) { |
| add_iface->close(); |
| delete add_iface; |
| } |
| add_iface = new AddInterface(this, this); |
| add_iface->show(); |
| add_iface->exec(); |
| } |
| |
| |
| #ifndef QT_NO_SESSIONMANAGER |
| void WpaGui::saveState() |
| { |
| QSettings settings("wpa_supplicant", "wpa_gui"); |
| settings.beginGroup("state"); |
| settings.setValue("session_id", app->sessionId()); |
| settings.setValue("in_tray", inTray); |
| settings.endGroup(); |
| } |
| #endif |