| # wpa_supplicant control interface |
| # Copyright (c) 2014, Qualcomm Atheros, Inc. |
| # |
| # This software may be distributed under the terms of the BSD license. |
| # See README for more details. |
| |
| import logging |
| logger = logging.getLogger() |
| import subprocess |
| import time |
| |
| import hostapd |
| from wpasupplicant import WpaSupplicant |
| from utils import alloc_fail |
| |
| def test_wpas_ctrl_network(dev): |
| """wpa_supplicant ctrl_iface network set/get""" |
| id = dev[0].add_network() |
| |
| if "FAIL" not in dev[0].request("SET_NETWORK " + str(id)): |
| raise Exception("Unexpected success for invalid SET_NETWORK") |
| if "FAIL" not in dev[0].request("SET_NETWORK " + str(id) + " name"): |
| raise Exception("Unexpected success for invalid SET_NETWORK") |
| if "FAIL" not in dev[0].request("SET_NETWORK " + str(id + 1) + " proto OPEN"): |
| raise Exception("Unexpected success for invalid network id") |
| if "FAIL" not in dev[0].request("GET_NETWORK " + str(id)): |
| raise Exception("Unexpected success for invalid GET_NETWORK") |
| if "FAIL" not in dev[0].request("GET_NETWORK " + str(id + 1) + " proto"): |
| raise Exception("Unexpected success for invalid network id") |
| |
| tests = (("key_mgmt", "WPA-PSK WPA-EAP IEEE8021X NONE WPA-NONE FT-PSK FT-EAP WPA-PSK-SHA256 WPA-EAP-SHA256"), |
| ("pairwise", "CCMP-256 GCMP-256 CCMP GCMP TKIP"), |
| ("group", "CCMP-256 GCMP-256 CCMP GCMP TKIP WEP104 WEP40"), |
| ("auth_alg", "OPEN SHARED LEAP"), |
| ("scan_freq", "1 2 3 4 5 6 7 8 9 10 11 12 13 14 15"), |
| ("freq_list", "2412 2417"), |
| ("scan_ssid", "1"), |
| ("bssid", "00:11:22:33:44:55"), |
| ("proto", "WPA RSN OSEN"), |
| ("eap", "TLS"), |
| ("go_p2p_dev_addr", "22:33:44:55:66:aa"), |
| ("p2p_client_list", "22:33:44:55:66:bb 02:11:22:33:44:55")) |
| |
| dev[0].set_network_quoted(id, "ssid", "test") |
| for field, value in tests: |
| dev[0].set_network(id, field, value) |
| res = dev[0].get_network(id, field) |
| if res != value: |
| raise Exception("Unexpected response for '" + field + "': '" + res + "'") |
| |
| q_tests = (("identity", "hello"), |
| ("anonymous_identity", "foo@nowhere.com")) |
| for field, value in q_tests: |
| dev[0].set_network_quoted(id, field, value) |
| res = dev[0].get_network(id, field) |
| if res != '"' + value + '"': |
| raise Exception("Unexpected quoted response for '" + field + "': '" + res + "'") |
| |
| get_tests = (("foo", None), ("ssid", '"test"')) |
| for field, value in get_tests: |
| res = dev[0].get_network(id, field) |
| if res != value: |
| raise Exception("Unexpected response for '" + field + "': '" + res + "'") |
| |
| if dev[0].get_network(id, "password"): |
| raise Exception("Unexpected response for 'password'") |
| dev[0].set_network_quoted(id, "password", "foo") |
| if dev[0].get_network(id, "password") != '*': |
| raise Exception("Unexpected response for 'password' (expected *)") |
| dev[0].set_network(id, "password", "hash:12345678901234567890123456789012") |
| if dev[0].get_network(id, "password") != '*': |
| raise Exception("Unexpected response for 'password' (expected *)") |
| dev[0].set_network(id, "password", "NULL") |
| if dev[0].get_network(id, "password"): |
| raise Exception("Unexpected response for 'password'") |
| if "FAIL" not in dev[0].request("SET_NETWORK " + str(id) + " password hash:12"): |
| raise Exception("Unexpected success for invalid password hash") |
| if "FAIL" not in dev[0].request("SET_NETWORK " + str(id) + " password hash:123456789012345678x0123456789012"): |
| raise Exception("Unexpected success for invalid password hash") |
| |
| dev[0].set_network(id, "identity", "414243") |
| if dev[0].get_network(id, "identity") != '"ABC"': |
| raise Exception("Unexpected identity hex->text response") |
| |
| dev[0].set_network(id, "identity", 'P"abc\ndef"') |
| if dev[0].get_network(id, "identity") != "6162630a646566": |
| raise Exception("Unexpected identity printf->hex response") |
| |
| if "FAIL" not in dev[0].request("SET_NETWORK " + str(id) + ' identity P"foo'): |
| raise Exception("Unexpected success for invalid identity string") |
| |
| if "FAIL" not in dev[0].request("SET_NETWORK " + str(id) + ' identity 12x3'): |
| raise Exception("Unexpected success for invalid identity string") |
| |
| for i in range(0, 4): |
| if "FAIL" in dev[0].request("SET_NETWORK " + str(id) + ' wep_key' + str(i) + ' aabbccddee'): |
| raise Exception("Unexpected wep_key set failure") |
| if dev[0].get_network(id, "wep_key" + str(i)) != '*': |
| raise Exception("Unexpected wep_key get failure") |
| |
| if "FAIL" in dev[0].request("SET_NETWORK " + str(id) + ' psk_list P2P-00:11:22:33:44:55-0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef'): |
| raise Exception("Unexpected failure for psk_list string") |
| |
| if "FAIL" not in dev[0].request("SET_NETWORK " + str(id) + ' psk_list 00:11:x2:33:44:55-0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef'): |
| raise Exception("Unexpected success for invalid psk_list string") |
| |
| if "FAIL" not in dev[0].request("SET_NETWORK " + str(id) + ' psk_list P2P-00:11:x2:33:44:55-0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef'): |
| raise Exception("Unexpected success for invalid psk_list string") |
| |
| if "FAIL" not in dev[0].request("SET_NETWORK " + str(id) + ' psk_list P2P-00:11:22:33:44:55+0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef'): |
| raise Exception("Unexpected success for invalid psk_list string") |
| |
| if "FAIL" not in dev[0].request("SET_NETWORK " + str(id) + ' psk_list P2P-00:11:22:33:44:55-0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcde'): |
| raise Exception("Unexpected success for invalid psk_list string") |
| |
| if "FAIL" not in dev[0].request("SET_NETWORK " + str(id) + ' psk_list P2P-00:11:22:33:44:55-0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdex'): |
| raise Exception("Unexpected success for invalid psk_list string") |
| |
| if dev[0].get_network(id, "psk_list"): |
| raise Exception("Unexpected psk_list get response") |
| |
| if dev[0].list_networks()[0]['ssid'] != "test": |
| raise Exception("Unexpected ssid in LIST_NETWORKS") |
| dev[0].set_network(id, "ssid", "NULL") |
| if dev[0].list_networks()[0]['ssid'] != "": |
| raise Exception("Unexpected ssid in LIST_NETWORKS after clearing it") |
| |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' ssid "0123456789abcdef0123456789abcdef0"'): |
| raise Exception("Too long SSID accepted") |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' scan_ssid qwerty'): |
| raise Exception("Invalid integer accepted") |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' scan_ssid 2'): |
| raise Exception("Too large integer accepted") |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' psk 12345678'): |
| raise Exception("Invalid PSK accepted") |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' psk "1234567"'): |
| raise Exception("Too short PSK accepted") |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' psk "1234567890123456789012345678901234567890123456789012345678901234"'): |
| raise Exception("Too long PSK accepted") |
| dev[0].set_network_quoted(id, "psk", "123456768"); |
| dev[0].set_network_quoted(id, "psk", "123456789012345678901234567890123456789012345678901234567890123"); |
| if dev[0].get_network(id, "psk") != '*': |
| raise Exception("Unexpected psk read result"); |
| |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' eap UNKNOWN'): |
| raise Exception("Unknown EAP method accepted") |
| |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' password "foo'): |
| raise Exception("Invalid password accepted") |
| |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' wep_key0 "foo'): |
| raise Exception("Invalid WEP key accepted") |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' wep_key0 "12345678901234567"'): |
| raise Exception("Too long WEP key accepted") |
| # too short WEP key is ignored |
| dev[0].set_network_quoted(id, "wep_key0", "1234") |
| dev[0].set_network_quoted(id, "wep_key1", "12345") |
| dev[0].set_network_quoted(id, "wep_key2", "1234567890123") |
| dev[0].set_network_quoted(id, "wep_key3", "1234567890123456") |
| |
| dev[0].set_network(id, "go_p2p_dev_addr", "any") |
| if dev[0].get_network(id, "go_p2p_dev_addr") is not None: |
| raise Exception("Unexpected go_p2p_dev_addr value") |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' go_p2p_dev_addr 00:11:22:33:44'): |
| raise Exception("Invalid go_p2p_dev_addr accepted") |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' p2p_client_list 00:11:22:33:44'): |
| raise Exception("Invalid p2p_client_list accepted") |
| if "FAIL" in dev[0].request('SET_NETWORK ' + str(id) + ' p2p_client_list 00:11:22:33:44:55 00:1'): |
| raise Exception("p2p_client_list truncation workaround failed") |
| if dev[0].get_network(id, "p2p_client_list") != "00:11:22:33:44:55": |
| raise Exception("p2p_client_list truncation workaround did not work") |
| |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' auth_alg '): |
| raise Exception("Empty auth_alg accepted") |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' auth_alg FOO'): |
| raise Exception("Invalid auth_alg accepted") |
| |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' proto '): |
| raise Exception("Empty proto accepted") |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' proto FOO'): |
| raise Exception("Invalid proto accepted") |
| |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' pairwise '): |
| raise Exception("Empty pairwise accepted") |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' pairwise FOO'): |
| raise Exception("Invalid pairwise accepted") |
| if "FAIL" not in dev[0].request('SET_NETWORK ' + str(id) + ' pairwise WEP40'): |
| raise Exception("Invalid pairwise accepted") |
| |
| if "OK" not in dev[0].request('BSSID ' + str(id) + ' 00:11:22:33:44:55'): |
| raise Exception("Unexpected BSSID failure") |
| if dev[0].request("GET_NETWORK 0 bssid") != '00:11:22:33:44:55': |
| raise Exception("BSSID command did not set network bssid") |
| if "OK" not in dev[0].request('BSSID ' + str(id) + ' 00:00:00:00:00:00'): |
| raise Exception("Unexpected BSSID failure") |
| if "FAIL" not in dev[0].request("GET_NETWORK 0 bssid"): |
| raise Exception("bssid claimed configured after clearing") |
| if "FAIL" not in dev[0].request('BSSID 123 00:11:22:33:44:55'): |
| raise Exception("Unexpected BSSID success") |
| if "FAIL" not in dev[0].request('BSSID ' + str(id) + ' 00:11:22:33:44'): |
| raise Exception("Unexpected BSSID success") |
| if "FAIL" not in dev[0].request('BSSID ' + str(id)): |
| raise Exception("Unexpected BSSID success") |
| |
| tests = [ "02:11:22:33:44:55", |
| "02:11:22:33:44:55 02:ae:be:ce:53:77", |
| "02:11:22:33:44:55/ff:00:ff:00:ff:00", |
| "02:11:22:33:44:55/ff:00:ff:00:ff:00 f2:99:88:77:66:55", |
| "f2:99:88:77:66:55 02:11:22:33:44:55/ff:00:ff:00:ff:00", |
| "f2:99:88:77:66:55 02:11:22:33:44:55/ff:00:ff:00:ff:00 12:34:56:78:90:ab", |
| "02:11:22:33:44:55/ff:ff:ff:00:00:00 02:ae:be:ce:53:77/00:00:00:00:00:ff" ] |
| for val in tests: |
| dev[0].set_network(id, "bssid_blacklist", val) |
| res = dev[0].get_network(id, "bssid_blacklist") |
| if res != val: |
| raise Exception("Unexpected bssid_blacklist value: %s != %s" % (res, val)) |
| dev[0].set_network(id, "bssid_whitelist", val) |
| res = dev[0].get_network(id, "bssid_whitelist") |
| if res != val: |
| raise Exception("Unexpected bssid_whitelist value: %s != %s" % (res, val)) |
| |
| tests = [ "foo", |
| "00:11:22:33:44:5", |
| "00:11:22:33:44:55q", |
| "00:11:22:33:44:55/", |
| "00:11:22:33:44:55/66:77:88:99:aa:b" ] |
| for val in tests: |
| if "FAIL" not in dev[0].request("SET_NETWORK %d bssid_blacklist %s" % (id, val)): |
| raise Exception("Invalid bssid_blacklist value accepted") |
| |
| def test_wpas_ctrl_many_networks(dev, apdev): |
| """wpa_supplicant ctrl_iface LIST_NETWORKS with huge number of networks""" |
| for i in range(1000): |
| id = dev[0].add_network() |
| res = dev[0].request("LIST_NETWORKS") |
| if str(id) in res: |
| raise Exception("Last added network was unexpectedly included") |
| res = dev[0].request("LIST_NETWORKS LAST_ID=%d" % (id - 2)) |
| if str(id) not in res: |
| raise Exception("Last added network was not present when using LAST_ID") |
| # This command can take a very long time under valgrind testing on a low |
| # power CPU, so increase the command timeout significantly to avoid issues |
| # with the test case failing and following reset operation timing out. |
| dev[0].request("REMOVE_NETWORK all", timeout=60) |
| |
| def test_wpas_ctrl_dup_network(dev, apdev): |
| """wpa_supplicant ctrl_iface DUP_NETWORK""" |
| ssid = "target" |
| passphrase = 'qwertyuiop' |
| params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase) |
| hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| src = dev[0].connect("another", psk=passphrase, scan_freq="2412", |
| only_add_network=True) |
| id = dev[0].add_network() |
| dev[0].set_network_quoted(id, "ssid", ssid) |
| for f in [ "key_mgmt", "psk", "scan_freq" ]: |
| res = dev[0].request("DUP_NETWORK {} {} {}".format(src, id, f)) |
| if "OK" not in res: |
| raise Exception("DUP_NETWORK failed") |
| dev[0].connect_network(id) |
| |
| if "FAIL" not in dev[0].request("DUP_NETWORK "): |
| raise Exception("Unexpected DUP_NETWORK success") |
| if "FAIL" not in dev[0].request("DUP_NETWORK %d " % id): |
| raise Exception("Unexpected DUP_NETWORK success") |
| if "FAIL" not in dev[0].request("DUP_NETWORK %d %d" % (id, id)): |
| raise Exception("Unexpected DUP_NETWORK success") |
| if "FAIL" not in dev[0].request("DUP_NETWORK 123456 1234567 "): |
| raise Exception("Unexpected DUP_NETWORK success") |
| if "FAIL" not in dev[0].request("DUP_NETWORK %d 123456 " % id): |
| raise Exception("Unexpected DUP_NETWORK success") |
| if "FAIL" not in dev[0].request("DUP_NETWORK %d %d foo" % (id, id)): |
| raise Exception("Unexpected DUP_NETWORK success") |
| dev[0].request("DISCONNECT") |
| if "OK" not in dev[0].request("DUP_NETWORK %d %d ssid" % (id, id)): |
| raise Exception("Unexpected DUP_NETWORK failure") |
| |
| def add_cred(dev): |
| id = dev.add_cred() |
| ev = dev.wait_event(["CRED-ADDED"]) |
| if ev is None: |
| raise Exception("Missing CRED-ADDED event") |
| if " " + str(id) not in ev: |
| raise Exception("CRED-ADDED event without matching id") |
| return id |
| |
| def set_cred(dev, id, field, value): |
| dev.set_cred(id, field, value) |
| ev = dev.wait_event(["CRED-MODIFIED"]) |
| if ev is None: |
| raise Exception("Missing CRED-MODIFIED event") |
| if " " + str(id) + " " not in ev: |
| raise Exception("CRED-MODIFIED event without matching id") |
| if field not in ev: |
| raise Exception("CRED-MODIFIED event without matching field") |
| |
| def set_cred_quoted(dev, id, field, value): |
| dev.set_cred_quoted(id, field, value) |
| ev = dev.wait_event(["CRED-MODIFIED"]) |
| if ev is None: |
| raise Exception("Missing CRED-MODIFIED event") |
| if " " + str(id) + " " not in ev: |
| raise Exception("CRED-MODIFIED event without matching id") |
| if field not in ev: |
| raise Exception("CRED-MODIFIED event without matching field") |
| |
| def remove_cred(dev, id): |
| dev.remove_cred(id) |
| ev = dev.wait_event(["CRED-REMOVED"]) |
| if ev is None: |
| raise Exception("Missing CRED-REMOVED event") |
| if " " + str(id) not in ev: |
| raise Exception("CRED-REMOVED event without matching id") |
| |
| def test_wpas_ctrl_cred(dev): |
| """wpa_supplicant ctrl_iface cred set""" |
| id1 = add_cred(dev[0]) |
| if "FAIL" not in dev[0].request("SET_CRED " + str(id1 + 1) + " temporary 1"): |
| raise Exception("SET_CRED succeeded unexpectedly on unknown cred id") |
| if "FAIL" not in dev[0].request("SET_CRED " + str(id1)): |
| raise Exception("Invalid SET_CRED succeeded unexpectedly") |
| if "FAIL" not in dev[0].request("SET_CRED " + str(id1) + " temporary"): |
| raise Exception("Invalid SET_CRED succeeded unexpectedly") |
| if "FAIL" not in dev[0].request("GET_CRED " + str(id1 + 1) + " temporary"): |
| raise Exception("GET_CRED succeeded unexpectedly on unknown cred id") |
| if "FAIL" not in dev[0].request("GET_CRED " + str(id1)): |
| raise Exception("Invalid GET_CRED succeeded unexpectedly") |
| if "FAIL" not in dev[0].request("GET_CRED " + str(id1) + " foo"): |
| raise Exception("Invalid GET_CRED succeeded unexpectedly") |
| id = add_cred(dev[0]) |
| id2 = add_cred(dev[0]) |
| set_cred(dev[0], id, "temporary", "1") |
| set_cred(dev[0], id, "priority", "1") |
| set_cred(dev[0], id, "pcsc", "1") |
| set_cred_quoted(dev[0], id, "private_key_passwd", "test") |
| set_cred_quoted(dev[0], id, "domain_suffix_match", "test") |
| set_cred_quoted(dev[0], id, "phase1", "test") |
| set_cred_quoted(dev[0], id, "phase2", "test") |
| |
| if "FAIL" not in dev[0].request("SET_CRED " + str(id) + " eap FOO"): |
| raise Exception("Unexpected success on unknown EAP method") |
| |
| if "FAIL" not in dev[0].request("SET_CRED " + str(id) + " username 12xa"): |
| raise Exception("Unexpected success on invalid string") |
| |
| for i in ("11", "1122", "112233445566778899aabbccddeeff00"): |
| if "FAIL" not in dev[0].request("SET_CRED " + str(id) + " roaming_consortium " + i): |
| raise Exception("Unexpected success on invalid roaming_consortium") |
| |
| dev[0].set_cred(id, "excluded_ssid", "00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff") |
| if "FAIL" not in dev[0].request("SET_CRED " + str(id) + " excluded_ssid 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff00"): |
| raise Exception("Unexpected success on invalid excluded_ssid") |
| |
| if "FAIL" not in dev[0].request("SET_CRED " + str(id) + " foo 4142"): |
| raise Exception("Unexpected success on unknown field") |
| |
| id3 = add_cred(dev[0]) |
| id4 = add_cred(dev[0]) |
| if len(dev[0].request("LIST_CREDS").splitlines()) != 6: |
| raise Exception("Unexpected LIST_CREDS result(1)") |
| |
| remove_cred(dev[0], id1) |
| remove_cred(dev[0], id3) |
| remove_cred(dev[0], id4) |
| remove_cred(dev[0], id2) |
| remove_cred(dev[0], id) |
| if "FAIL" not in dev[0].request("REMOVE_CRED 1"): |
| raise Exception("Unexpected success on invalid remove cred") |
| if len(dev[0].request("LIST_CREDS").splitlines()) != 1: |
| raise Exception("Unexpected LIST_CREDS result(2)") |
| |
| id = add_cred(dev[0]) |
| values = [ ("temporary", "1", False), |
| ("temporary", "0", False), |
| ("pcsc", "1", False), |
| ("realm", "example.com", True), |
| ("username", "user@example.com", True), |
| ("password", "foo", True, "*"), |
| ("ca_cert", "ca.pem", True), |
| ("client_cert", "user.pem", True), |
| ("private_key", "key.pem", True), |
| ("private_key_passwd", "foo", True, "*"), |
| ("imsi", "310026-000000000", True), |
| ("milenage", "foo", True, "*"), |
| ("domain_suffix_match", "example.com", True), |
| ("domain", "example.com", True), |
| ("domain", "example.org", True, "example.com\nexample.org"), |
| ("roaming_consortium", "0123456789", False), |
| ("required_roaming_consortium", "456789", False), |
| ("eap", "TTLS", False), |
| ("phase1", "foo=bar1", True), |
| ("phase2", "foo=bar2", True), |
| ("excluded_ssid", "test", True), |
| ("excluded_ssid", "foo", True, "test\nfoo"), |
| ("roaming_partner", "example.com,0,4,*", True), |
| ("roaming_partner", "example.org,1,2,US", True, |
| "example.com,0,4,*\nexample.org,1,2,US"), |
| ("update_identifier", "4", False), |
| ("provisioning_sp", "sp.example.com", True), |
| ("sp_priority", "7", False), |
| ("min_dl_bandwidth_home", "100", False), |
| ("min_ul_bandwidth_home", "101", False), |
| ("min_dl_bandwidth_roaming", "102", False), |
| ("min_ul_bandwidth_roaming", "103", False), |
| ("max_bss_load", "57", False), |
| ("req_conn_capab", "6:22,80,443", False), |
| ("req_conn_capab", "17:500", False, "6:22,80,443\n17:500"), |
| ("req_conn_capab", "50", False, "6:22,80,443\n17:500\n50"), |
| ("ocsp", "1", False) ] |
| for v in values: |
| if v[2]: |
| set_cred_quoted(dev[0], id, v[0], v[1]) |
| else: |
| set_cred(dev[0], id, v[0], v[1]) |
| val = dev[0].get_cred(id, v[0]) |
| if len(v) == 4: |
| expect = v[3] |
| else: |
| expect = v[1] |
| if val != expect: |
| raise Exception("Unexpected GET_CRED value for {}: {} != {}".format(v[0], val, expect)) |
| creds = dev[0].request("LIST_CREDS").splitlines() |
| if len(creds) != 2: |
| raise Exception("Unexpected LIST_CREDS result(3)") |
| if creds[1] != "0\texample.com\tuser@example.com\texample.com\t310026-000000000": |
| raise Exception("Unexpected LIST_CREDS value") |
| remove_cred(dev[0], id) |
| if len(dev[0].request("LIST_CREDS").splitlines()) != 1: |
| raise Exception("Unexpected LIST_CREDS result(4)") |
| |
| id = add_cred(dev[0]) |
| set_cred_quoted(dev[0], id, "domain", "foo.example.com") |
| id = add_cred(dev[0]) |
| set_cred_quoted(dev[0], id, "domain", "bar.example.com") |
| id = add_cred(dev[0]) |
| set_cred_quoted(dev[0], id, "domain", "foo.example.com") |
| if "OK" not in dev[0].request("REMOVE_CRED sp_fqdn=foo.example.com"): |
| raise Exception("REMOVE_CRED failed") |
| creds = dev[0].request("LIST_CREDS") |
| if "foo.example.com" in creds: |
| raise Exception("REMOVE_CRED sp_fqdn did not remove cred") |
| if "bar.example.com" not in creds: |
| raise Exception("REMOVE_CRED sp_fqdn removed incorrect cred") |
| dev[0].request("REMOVE_CRED all") |
| |
| id = add_cred(dev[0]) |
| set_cred_quoted(dev[0], id, "domain", "foo.example.com") |
| set_cred_quoted(dev[0], id, "provisioning_sp", "sp.foo.example.com") |
| id = add_cred(dev[0]) |
| set_cred_quoted(dev[0], id, "domain", "bar.example.com") |
| set_cred_quoted(dev[0], id, "provisioning_sp", "sp.bar.example.com") |
| id = add_cred(dev[0]) |
| set_cred_quoted(dev[0], id, "domain", "foo.example.com") |
| set_cred_quoted(dev[0], id, "provisioning_sp", "sp.foo.example.com") |
| if "OK" not in dev[0].request("REMOVE_CRED provisioning_sp=sp.foo.example.com"): |
| raise Exception("REMOVE_CRED failed") |
| creds = dev[0].request("LIST_CREDS") |
| if "foo.example.com" in creds: |
| raise Exception("REMOVE_CRED provisioning_sp did not remove cred") |
| if "bar.example.com" not in creds: |
| raise Exception("REMOVE_CRED provisioning_sp removed incorrect cred") |
| dev[0].request("REMOVE_CRED all") |
| |
| # Test large number of creds and LIST_CREDS truncation |
| dev[0].dump_monitor() |
| for i in range(0, 100): |
| id = add_cred(dev[0]) |
| set_cred_quoted(dev[0], id, "realm", "relatively.long.realm.test%d.example.com" % i) |
| dev[0].dump_monitor() |
| creds = dev[0].request("LIST_CREDS") |
| for i in range(0, 100): |
| dev[0].remove_cred(i) |
| dev[0].dump_monitor() |
| if len(creds) < 3900 or len(creds) > 4100: |
| raise Exception("Unexpected LIST_CREDS length: %d" % len(creds)) |
| if "test10.example.com" not in creds: |
| raise Exception("Missing credential") |
| if len(creds.splitlines()) > 95: |
| raise Exception("Too many LIST_CREDS entries in the buffer") |
| |
| def test_wpas_ctrl_pno(dev): |
| """wpa_supplicant ctrl_iface pno""" |
| if "FAIL" not in dev[0].request("SET pno 1"): |
| raise Exception("Unexpected success in enabling PNO without enabled network blocks") |
| id = dev[0].add_network() |
| dev[0].set_network_quoted(id, "ssid", "test") |
| dev[0].set_network(id, "key_mgmt", "NONE") |
| dev[0].request("ENABLE_NETWORK " + str(id) + " no-connect") |
| #mac80211_hwsim does not yet support PNO, so this fails |
| if "FAIL" not in dev[0].request("SET pno 1"): |
| raise Exception("Unexpected success in enabling PNO") |
| if "FAIL" not in dev[0].request("SET pno 1 freq=2000-3000,5180"): |
| raise Exception("Unexpected success in enabling PNO") |
| if "FAIL" not in dev[0].request("SET pno 1 freq=0-6000"): |
| raise Exception("Unexpected success in enabling PNO") |
| if "FAIL" in dev[0].request("SET pno 0"): |
| raise Exception("Unexpected failure in disabling PNO") |
| |
| def test_wpas_ctrl_get(dev): |
| """wpa_supplicant ctrl_iface get""" |
| if "FAIL" in dev[0].request("GET version"): |
| raise Exception("Unexpected get failure for version") |
| if "FAIL" in dev[0].request("GET wifi_display"): |
| raise Exception("Unexpected get failure for wifi_display") |
| if "FAIL" not in dev[0].request("GET foo"): |
| raise Exception("Unexpected success on get command") |
| |
| def test_wpas_ctrl_preauth(dev): |
| """wpa_supplicant ctrl_iface preauth""" |
| if "FAIL" not in dev[0].request("PREAUTH "): |
| raise Exception("Unexpected success on invalid PREAUTH") |
| if "FAIL" in dev[0].request("PREAUTH 00:11:22:33:44:55"): |
| raise Exception("Unexpected failure on PREAUTH") |
| |
| def test_wpas_ctrl_stkstart(dev): |
| """wpa_supplicant ctrl_iface strkstart""" |
| if "FAIL" not in dev[0].request("STKSTART "): |
| raise Exception("Unexpected success on invalid STKSTART") |
| if "FAIL" not in dev[0].request("STKSTART 00:11:22:33:44:55"): |
| raise Exception("Unexpected success on STKSTART") |
| |
| def test_wpas_ctrl_tdls_discover(dev): |
| """wpa_supplicant ctrl_iface tdls_discover""" |
| if "FAIL" not in dev[0].request("TDLS_DISCOVER "): |
| raise Exception("Unexpected success on invalid TDLS_DISCOVER") |
| if "FAIL" not in dev[0].request("TDLS_DISCOVER 00:11:22:33:44:55"): |
| raise Exception("Unexpected success on TDLS_DISCOVER") |
| |
| def test_wpas_ctrl_tdls_chan_switch(dev): |
| """wpa_supplicant ctrl_iface tdls_chan_switch error cases""" |
| for args in [ '', '00:11:22:33:44:55' ]: |
| if "FAIL" not in dev[0].request("TDLS_CANCEL_CHAN_SWITCH " + args): |
| raise Exception("Unexpected success on invalid TDLS_CANCEL_CHAN_SWITCH: " + args) |
| |
| for args in [ '', 'foo ', '00:11:22:33:44:55 ', '00:11:22:33:44:55 q', |
| '00:11:22:33:44:55 81', '00:11:22:33:44:55 81 1234', |
| '00:11:22:33:44:55 81 1234 center_freq1=234 center_freq2=345 bandwidth=456 sec_channel_offset=567 ht vht' ]: |
| if "FAIL" not in dev[0].request("TDLS_CHAN_SWITCH " + args): |
| raise Exception("Unexpected success on invalid TDLS_CHAN_SWITCH: " + args) |
| |
| def test_wpas_ctrl_addr(dev): |
| """wpa_supplicant ctrl_iface invalid address""" |
| if "FAIL" not in dev[0].request("TDLS_SETUP "): |
| raise Exception("Unexpected success on invalid TDLS_SETUP") |
| if "FAIL" not in dev[0].request("TDLS_TEARDOWN "): |
| raise Exception("Unexpected success on invalid TDLS_TEARDOWN") |
| if "FAIL" not in dev[0].request("FT_DS "): |
| raise Exception("Unexpected success on invalid FT_DS") |
| if "FAIL" not in dev[0].request("WPS_PBC 00:11:22:33:44"): |
| raise Exception("Unexpected success on invalid WPS_PBC") |
| if "FAIL" not in dev[0].request("WPS_PIN 00:11:22:33:44"): |
| raise Exception("Unexpected success on invalid WPS_PIN") |
| if "FAIL" not in dev[0].request("WPS_NFC 00:11:22:33:44"): |
| raise Exception("Unexpected success on invalid WPS_NFC") |
| if "FAIL" not in dev[0].request("WPS_REG 00:11:22:33:44 12345670"): |
| raise Exception("Unexpected success on invalid WPS_REG") |
| if "FAIL" not in dev[0].request("IBSS_RSN 00:11:22:33:44"): |
| raise Exception("Unexpected success on invalid IBSS_RSN") |
| if "FAIL" not in dev[0].request("BLACKLIST 00:11:22:33:44"): |
| raise Exception("Unexpected success on invalid BLACKLIST") |
| |
| def test_wpas_ctrl_wps_errors(dev): |
| """wpa_supplicant ctrl_iface WPS error cases""" |
| if "FAIL" not in dev[0].request("WPS_REG 00:11:22:33:44:55"): |
| raise Exception("Unexpected success on invalid WPS_REG") |
| if "FAIL" not in dev[0].request("WPS_REG 00:11:22:33:44:55 12345670 2233"): |
| raise Exception("Unexpected success on invalid WPS_REG") |
| if "FAIL" not in dev[0].request("WPS_REG 00:11:22:33:44:55 12345670 2233 OPEN"): |
| raise Exception("Unexpected success on invalid WPS_REG") |
| if "FAIL" not in dev[0].request("WPS_REG 00:11:22:33:44:55 12345670 2233 OPEN NONE"): |
| raise Exception("Unexpected success on invalid WPS_REG") |
| |
| if "FAIL" not in dev[0].request("WPS_AP_PIN random"): |
| raise Exception("Unexpected success on WPS_AP_PIN in non-AP mode") |
| |
| if "FAIL" not in dev[0].request("WPS_ER_PIN any"): |
| raise Exception("Unexpected success on invalid WPS_ER_PIN") |
| |
| if "FAIL" not in dev[0].request("WPS_ER_LEARN 00:11:22:33:44:55"): |
| raise Exception("Unexpected success on invalid WPS_ER_LEARN") |
| |
| if "FAIL" not in dev[0].request("WPS_ER_SET_CONFIG 00:11:22:33:44:55"): |
| raise Exception("Unexpected success on invalid WPS_ER_SET_CONFIG") |
| |
| if "FAIL" not in dev[0].request("WPS_ER_CONFIG 00:11:22:33:44:55"): |
| raise Exception("Unexpected success on invalid WPS_ER_CONFIG") |
| if "FAIL" not in dev[0].request("WPS_ER_CONFIG 00:11:22:33:44:55 12345670"): |
| raise Exception("Unexpected success on invalid WPS_ER_CONFIG") |
| if "FAIL" not in dev[0].request("WPS_ER_CONFIG 00:11:22:33:44:55 12345670 2233"): |
| raise Exception("Unexpected success on invalid WPS_ER_CONFIG") |
| if "FAIL" not in dev[0].request("WPS_ER_CONFIG 00:11:22:33:44:55 12345670 2233 OPEN"): |
| raise Exception("Unexpected success on invalid WPS_ER_CONFIG") |
| if "FAIL" not in dev[0].request("WPS_ER_CONFIG 00:11:22:33:44:55 12345670 2233 OPEN NONE"): |
| raise Exception("Unexpected success on invalid WPS_ER_CONFIG") |
| |
| if "FAIL" not in dev[0].request("WPS_ER_NFC_CONFIG_TOKEN WPS"): |
| raise Exception("Unexpected success on invalid WPS_ER_NFC_CONFIG_TOKEN") |
| if "FAIL" not in dev[0].request("WPS_ER_NFC_CONFIG_TOKEN FOO 00:11:22:33:44:55"): |
| raise Exception("Unexpected success on invalid WPS_ER_NFC_CONFIG_TOKEN") |
| if "FAIL" not in dev[0].request("WPS_ER_NFC_CONFIG_TOKEN NDEF 00:11:22:33:44:55"): |
| raise Exception("Unexpected success on invalid WPS_ER_NFC_CONFIG_TOKEN") |
| |
| if "FAIL" not in dev[0].request("WPS_NFC_CONFIG_TOKEN FOO"): |
| raise Exception("Unexpected success on invalid WPS_NFC_CONFIG_TOKEN") |
| if "FAIL" not in dev[0].request("WPS_NFC_CONFIG_TOKEN WPS FOO"): |
| raise Exception("Unexpected success on invalid WPS_NFC_CONFIG_TOKEN") |
| if "FAIL" not in dev[0].request("WPS_NFC_TOKEN FOO"): |
| raise Exception("Unexpected success on invalid WPS_NFC_TOKEN") |
| |
| def test_wpas_ctrl_config_parser(dev): |
| """wpa_supplicant ctrl_iface SET config parser""" |
| if "FAIL" not in dev[0].request("SET pbc_in_m1 qwerty"): |
| raise Exception("Non-number accepted as integer") |
| if "FAIL" not in dev[0].request("SET eapol_version 0"): |
| raise Exception("Out-of-range value accepted") |
| if "FAIL" not in dev[0].request("SET eapol_version 10"): |
| raise Exception("Out-of-range value accepted") |
| |
| if "FAIL" not in dev[0].request("SET serial_number 0123456789abcdef0123456789abcdef0"): |
| raise Exception("Too long string accepted") |
| |
| def test_wpas_ctrl_mib(dev): |
| """wpa_supplicant ctrl_iface MIB""" |
| mib = dev[0].get_mib() |
| if "dot11RSNAOptionImplemented" not in mib: |
| raise Exception("Missing MIB entry") |
| if mib["dot11RSNAOptionImplemented"] != "TRUE": |
| raise Exception("Unexpected dot11RSNAOptionImplemented value") |
| |
| def test_wpas_ctrl_set_wps_params(dev): |
| """wpa_supplicant ctrl_iface SET config_methods""" |
| ts = [ "config_methods label virtual_display virtual_push_button keypad", |
| "device_type 1-0050F204-1", |
| "os_version 01020300", |
| "uuid 12345678-9abc-def0-1234-56789abcdef0" ] |
| for t in ts: |
| if "OK" not in dev[2].request("SET " + t): |
| raise Exception("SET failed for: " + t) |
| |
| def test_wpas_ctrl_level(dev): |
| """wpa_supplicant ctrl_iface LEVEL""" |
| try: |
| if "FAIL" not in dev[2].request("LEVEL 3"): |
| raise Exception("Unexpected LEVEL success") |
| if "OK" not in dev[2].mon.request("LEVEL 2"): |
| raise Exception("Unexpected LEVEL failure") |
| dev[2].request("SCAN freq=2412") |
| ev = dev[2].wait_event(["State:"], timeout=5) |
| if ev is None: |
| raise Exception("No debug message received") |
| dev[2].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=5) |
| finally: |
| dev[2].mon.request("LEVEL 3") |
| |
| def test_wpas_ctrl_bssid_filter(dev, apdev): |
| """wpa_supplicant bssid_filter""" |
| try: |
| if "OK" not in dev[2].request("SET bssid_filter " + apdev[0]['bssid']): |
| raise Exception("Failed to set bssid_filter") |
| params = { "ssid": "test" } |
| hostapd.add_ap(apdev[0]['ifname'], params) |
| hostapd.add_ap(apdev[1]['ifname'], params) |
| dev[2].scan_for_bss(apdev[0]['bssid'], freq="2412") |
| dev[2].scan(freq="2412") |
| bss = dev[2].get_bss(apdev[0]['bssid']) |
| if bss is None or len(bss) == 0: |
| raise Exception("Missing BSS data") |
| bss = dev[2].get_bss(apdev[1]['bssid']) |
| if bss and len(bss) != 0: |
| raise Exception("Unexpected BSS data") |
| dev[2].request("SET bssid_filter ") |
| dev[2].scan(freq="2412") |
| bss = dev[2].get_bss(apdev[0]['bssid']) |
| if bss is None or len(bss) == 0: |
| raise Exception("Missing BSS data") |
| bss = dev[2].get_bss(apdev[1]['bssid']) |
| if bss is None or len(bss) == 0: |
| raise Exception("Missing BSS data(2)") |
| res = dev[2].request("SCAN_RESULTS").splitlines() |
| if "test" not in res[1] or "test" not in res[2]: |
| raise Exception("SSID missing from SCAN_RESULTS") |
| if apdev[0]['bssid'] not in res[1] and apdev[1]['bssid'] not in res[1]: |
| raise Exception("BSS1 missing from SCAN_RESULTS") |
| if apdev[0]['bssid'] not in res[2] and apdev[1]['bssid'] not in res[2]: |
| raise Exception("BSS1 missing from SCAN_RESULTS") |
| |
| if "FAIL" not in dev[2].request("SET bssid_filter 00:11:22:33:44:55 00:11:22:33:44"): |
| raise Exception("Unexpected success for invalid SET bssid_filter") |
| finally: |
| dev[2].request("SET bssid_filter ") |
| |
| def test_wpas_ctrl_disallow_aps(dev, apdev): |
| """wpa_supplicant ctrl_iface disallow_aps""" |
| params = { "ssid": "test" } |
| hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| if "FAIL" not in dev[0].request("SET disallow_aps bssid "): |
| raise Exception("Unexpected success on invalid disallow_aps") |
| if "FAIL" not in dev[0].request("SET disallow_aps bssid 00:11:22:33:44"): |
| raise Exception("Unexpected success on invalid disallow_aps") |
| if "FAIL" not in dev[0].request("SET disallow_aps ssid 0"): |
| raise Exception("Unexpected success on invalid disallow_aps") |
| if "FAIL" not in dev[0].request("SET disallow_aps ssid 4q"): |
| raise Exception("Unexpected success on invalid disallow_aps") |
| if "FAIL" not in dev[0].request("SET disallow_aps bssid 00:11:22:33:44:55 ssid 112233 ssid 123"): |
| raise Exception("Unexpected success on invalid disallow_aps") |
| if "FAIL" not in dev[0].request("SET disallow_aps ssid 000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f00"): |
| raise Exception("Unexpected success on invalid disallow_aps") |
| if "FAIL" not in dev[0].request("SET disallow_aps foo 112233445566"): |
| raise Exception("Unexpected success on invalid disallow_aps") |
| |
| dev[0].connect("test", key_mgmt="NONE", scan_freq="2412") |
| hostapd.add_ap(apdev[1]['ifname'], params) |
| dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412") |
| dev[0].dump_monitor() |
| if "OK" not in dev[0].request("SET disallow_aps bssid 00:11:22:33:44:55 bssid 00:22:33:44:55:66"): |
| raise Exception("Failed to set disallow_aps") |
| if "OK" not in dev[0].request("SET disallow_aps bssid " + apdev[0]['bssid']): |
| raise Exception("Failed to set disallow_aps") |
| ev = dev[0].wait_connected(timeout=30, error="Reassociation timed out") |
| if apdev[1]['bssid'] not in ev: |
| raise Exception("Unexpected BSSID") |
| |
| dev[0].dump_monitor() |
| if "OK" not in dev[0].request("SET disallow_aps ssid " + "test".encode("hex")): |
| raise Exception("Failed to set disallow_aps") |
| dev[0].wait_disconnected(timeout=5, error="Disconnection not seen") |
| ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=1) |
| if ev is not None: |
| raise Exception("Unexpected reassociation") |
| |
| dev[0].request("DISCONNECT") |
| dev[0].p2p_start_go(freq=2412) |
| if "OK" not in dev[0].request("SET disallow_aps "): |
| raise Exception("Failed to set disallow_aps") |
| |
| def test_wpas_ctrl_blob(dev): |
| """wpa_supplicant ctrl_iface SET blob""" |
| if "FAIL" not in dev[0].request("SET blob foo"): |
| raise Exception("Unexpected SET success") |
| if "FAIL" not in dev[0].request("SET blob foo 0"): |
| raise Exception("Unexpected SET success") |
| if "FAIL" not in dev[0].request("SET blob foo 0q"): |
| raise Exception("Unexpected SET success") |
| if "OK" not in dev[0].request("SET blob foo 00"): |
| raise Exception("Unexpected SET failure") |
| if "OK" not in dev[0].request("SET blob foo 0011"): |
| raise Exception("Unexpected SET failure") |
| |
| def test_wpas_ctrl_set_uapsd(dev): |
| """wpa_supplicant ctrl_iface SET uapsd""" |
| if "FAIL" not in dev[0].request("SET uapsd foo"): |
| raise Exception("Unexpected SET success") |
| if "FAIL" not in dev[0].request("SET uapsd 0,0,0"): |
| raise Exception("Unexpected SET success") |
| if "FAIL" not in dev[0].request("SET uapsd 0,0"): |
| raise Exception("Unexpected SET success") |
| if "FAIL" not in dev[0].request("SET uapsd 0"): |
| raise Exception("Unexpected SET success") |
| if "OK" not in dev[0].request("SET uapsd 1,1,1,1;1"): |
| raise Exception("Unexpected SET failure") |
| if "OK" not in dev[0].request("SET uapsd 0,0,0,0;0"): |
| raise Exception("Unexpected SET failure") |
| if "OK" not in dev[0].request("SET uapsd disable"): |
| raise Exception("Unexpected SET failure") |
| |
| def test_wpas_ctrl_set(dev): |
| """wpa_supplicant ctrl_iface SET""" |
| vals = [ "foo", |
| "ampdu 0", |
| "radio_disable 0", |
| "ps 10", |
| "ps 1", |
| "dot11RSNAConfigPMKLifetime 0", |
| "dot11RSNAConfigPMKReauthThreshold 101", |
| "dot11RSNAConfigSATimeout 0", |
| "wps_version_number -1", |
| "wps_version_number 256" ] |
| for val in vals: |
| if "FAIL" not in dev[0].request("SET " + val): |
| raise Exception("Unexpected SET success for " + val) |
| |
| vals = [ "EAPOL::heldPeriod 60", |
| "EAPOL::authPeriod 30", |
| "EAPOL::startPeriod 30", |
| "EAPOL::maxStart 3", |
| "dot11RSNAConfigSATimeout 60", |
| "ps -1", |
| "ps 0", |
| "no_keep_alive 0", |
| "tdls_disabled 1", |
| "tdls_disabled 0" ] |
| for val in vals: |
| if "OK" not in dev[0].request("SET " + val): |
| raise Exception("Unexpected SET failure for " + val) |
| |
| def test_wpas_ctrl_get_capability(dev): |
| """wpa_supplicant ctrl_iface GET_CAPABILITY""" |
| if "FAIL" not in dev[0].request("GET_CAPABILITY 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890"): |
| raise Exception("Unexpected success on invalid GET_CAPABILITY") |
| if "FAIL" not in dev[0].request("GET_CAPABILITY eap foo"): |
| raise Exception("Unexpected success on invalid GET_CAPABILITY") |
| if "AP" not in dev[0].request("GET_CAPABILITY modes strict"): |
| raise Exception("Unexpected GET_CAPABILITY response") |
| res = dev[0].get_capability("eap") |
| if "TTLS" not in res: |
| raise Exception("Unexpected GET_CAPABILITY eap response: " + str(res)) |
| |
| res = dev[0].get_capability("pairwise") |
| if "CCMP" not in res: |
| raise Exception("Unexpected GET_CAPABILITY pairwise response: " + str(res)) |
| |
| res = dev[0].get_capability("group") |
| if "CCMP" not in res: |
| raise Exception("Unexpected GET_CAPABILITY group response: " + str(res)) |
| |
| res = dev[0].get_capability("key_mgmt") |
| if "WPA-PSK" not in res or "WPA-EAP" not in res: |
| raise Exception("Unexpected GET_CAPABILITY key_mgmt response: " + str(res)) |
| |
| res = dev[0].get_capability("proto") |
| if "WPA" not in res or "RSN" not in res: |
| raise Exception("Unexpected GET_CAPABILITY proto response: " + str(res)) |
| |
| res = dev[0].get_capability("auth_alg") |
| if "OPEN" not in res or "SHARED" not in res: |
| raise Exception("Unexpected GET_CAPABILITY auth_alg response: " + str(res)) |
| |
| res = dev[0].get_capability("modes") |
| if "IBSS" not in res or "AP" not in res: |
| raise Exception("Unexpected GET_CAPABILITY modes response: " + str(res)) |
| |
| res = dev[0].get_capability("channels") |
| if "8" not in res or "36" not in res: |
| raise Exception("Unexpected GET_CAPABILITY channels response: " + str(res)) |
| |
| res = dev[0].get_capability("freq") |
| if "2457" not in res or "5180" not in res: |
| raise Exception("Unexpected GET_CAPABILITY freq response: " + str(res)) |
| |
| res = dev[0].get_capability("tdls") |
| if "EXTERNAL" not in res[0]: |
| raise Exception("Unexpected GET_CAPABILITY tdls response: " + str(res)) |
| |
| res = dev[0].get_capability("erp") |
| if res is None or "ERP" not in res[0]: |
| raise Exception("Unexpected GET_CAPABILITY erp response: " + str(res)) |
| |
| if dev[0].get_capability("foo") is not None: |
| raise Exception("Unexpected GET_CAPABILITY foo response: " + str(res)) |
| |
| def test_wpas_ctrl_nfc_report_handover(dev): |
| """wpa_supplicant ctrl_iface NFC_REPORT_HANDOVER""" |
| vals = [ "FOO", |
| "ROLE freq=12345", |
| "ROLE TYPE", |
| "ROLE TYPE REQ", |
| "ROLE TYPE REQ SEL", |
| "ROLE TYPE 0Q SEL", |
| "ROLE TYPE 00 SEL", |
| "ROLE TYPE 00 0Q", |
| "ROLE TYPE 00 00" ] |
| for v in vals: |
| if "FAIL" not in dev[0].request("NFC_REPORT_HANDOVER " + v): |
| raise Exception("Unexpected NFC_REPORT_HANDOVER success for " + v) |
| |
| def test_wpas_ctrl_nfc_tag_read(dev): |
| """wpa_supplicant ctrl_iface WPS_NFC_TAG_READ""" |
| vals = [ "FOO", "0Q", "00", "000000", "10000001", "10000000", "00000000", |
| "100e0000", "100e0001ff", "100e000411110000", "100e0004100e0001" ] |
| for v in vals: |
| if "FAIL" not in dev[0].request("WPS_NFC_TAG_READ " + v): |
| raise Exception("Unexpected WPS_NFC_TAG_READ success for " + v) |
| |
| def test_wpas_ctrl_nfc_get_handover(dev): |
| """wpa_supplicant ctrl_iface NFC_GET_HANDOVER""" |
| vals = [ "FOO", "FOO BAR", "WPS WPS", "WPS WPS-CR", "WPS FOO", "NDEF P2P" ] |
| for v in vals: |
| if "FAIL" not in dev[0].request("NFC_GET_HANDOVER_REQ " + v): |
| raise Exception("Unexpected NFC_GET_HANDOVER_REQ success for " + v) |
| |
| vals = [ "NDEF WPS", "NDEF P2P-CR", "WPS P2P-CR" ] |
| for v in vals: |
| if "FAIL" in dev[0].request("NFC_GET_HANDOVER_REQ " + v): |
| raise Exception("Unexpected NFC_GET_HANDOVER_REQ failure for " + v) |
| |
| vals = [ "FOO", "FOO BAR", "WPS WPS", "WPS WPS-CR", "WPS FOO", "NDEF P2P", |
| "NDEF WPS", "NDEF WPS uuid" ] |
| for v in vals: |
| if "FAIL" not in dev[0].request("NFC_GET_HANDOVER_SEL " + v): |
| raise Exception("Unexpected NFC_GET_HANDOVER_SEL success for " + v) |
| |
| vals = [ "NDEF P2P-CR", "WPS P2P-CR", "NDEF P2P-CR-TAG", |
| "WPS P2P-CR-TAG" ] |
| for v in vals: |
| if "FAIL" in dev[0].request("NFC_GET_HANDOVER_SEL " + v): |
| raise Exception("Unexpected NFC_GET_HANDOVER_SEL failure for " + v) |
| |
| def get_blacklist(dev): |
| return dev.request("BLACKLIST").splitlines() |
| |
| def test_wpas_ctrl_blacklist(dev): |
| """wpa_supplicant ctrl_iface BLACKLIST""" |
| if "OK" not in dev[0].request("BLACKLIST clear"): |
| raise Exception("BLACKLIST clear failed") |
| b = get_blacklist(dev[0]) |
| if len(b) != 0: |
| raise Exception("Unexpected blacklist contents: " + str(b)) |
| if "OK" not in dev[0].request("BLACKLIST 00:11:22:33:44:55"): |
| raise Exception("BLACKLIST add failed") |
| b = get_blacklist(dev[0]) |
| if "00:11:22:33:44:55" not in b: |
| raise Exception("Unexpected blacklist contents: " + str(b)) |
| if "OK" not in dev[0].request("BLACKLIST 00:11:22:33:44:56"): |
| raise Exception("BLACKLIST add failed") |
| b = get_blacklist(dev[0]) |
| if "00:11:22:33:44:55" not in b or "00:11:22:33:44:56" not in b: |
| raise Exception("Unexpected blacklist contents: " + str(b)) |
| if "OK" not in dev[0].request("BLACKLIST 00:11:22:33:44:56"): |
| raise Exception("BLACKLIST add failed") |
| b = get_blacklist(dev[0]) |
| if "00:11:22:33:44:55" not in b or "00:11:22:33:44:56" not in b or len(b) != 2: |
| raise Exception("Unexpected blacklist contents: " + str(b)) |
| |
| if "OK" not in dev[0].request("BLACKLIST clear"): |
| raise Exception("BLACKLIST clear failed") |
| if dev[0].request("BLACKLIST") != "": |
| raise Exception("Unexpected blacklist contents") |
| |
| def test_wpas_ctrl_blacklist_oom(dev): |
| """wpa_supplicant ctrl_iface BLACKLIST and out-of-memory""" |
| with alloc_fail(dev[0], 1, "wpa_blacklist_add"): |
| if "FAIL" not in dev[0].request("BLACKLIST aa:bb:cc:dd:ee:ff"): |
| raise Exception("Unexpected success with allocation failure") |
| |
| def test_wpas_ctrl_log_level(dev): |
| """wpa_supplicant ctrl_iface LOG_LEVEL""" |
| level = dev[2].request("LOG_LEVEL") |
| if "Current level: MSGDUMP" not in level: |
| raise Exception("Unexpected debug level(1): " + level) |
| if "Timestamp: 1" not in level: |
| raise Exception("Unexpected timestamp(1): " + level) |
| |
| if "OK" not in dev[2].request("LOG_LEVEL MSGDUMP 0"): |
| raise Exception("LOG_LEVEL failed") |
| level = dev[2].request("LOG_LEVEL") |
| if "Current level: MSGDUMP" not in level: |
| raise Exception("Unexpected debug level(2): " + level) |
| if "Timestamp: 0" not in level: |
| raise Exception("Unexpected timestamp(2): " + level) |
| |
| if "OK" not in dev[2].request("LOG_LEVEL MSGDUMP 1"): |
| raise Exception("LOG_LEVEL failed") |
| level = dev[2].request("LOG_LEVEL") |
| if "Current level: MSGDUMP" not in level: |
| raise Exception("Unexpected debug level(3): " + level) |
| if "Timestamp: 1" not in level: |
| raise Exception("Unexpected timestamp(3): " + level) |
| |
| if "FAIL" not in dev[2].request("LOG_LEVEL FOO"): |
| raise Exception("Invalid LOG_LEVEL accepted") |
| |
| for lev in [ "EXCESSIVE", "MSGDUMP", "DEBUG", "INFO", "WARNING", "ERROR" ]: |
| if "OK" not in dev[2].request("LOG_LEVEL " + lev): |
| raise Exception("LOG_LEVEL failed for " + lev) |
| level = dev[2].request("LOG_LEVEL") |
| if "Current level: " + lev not in level: |
| raise Exception("Unexpected debug level: " + level) |
| |
| if "OK" not in dev[2].request("LOG_LEVEL MSGDUMP 1"): |
| raise Exception("LOG_LEVEL failed") |
| level = dev[2].request("LOG_LEVEL") |
| if "Current level: MSGDUMP" not in level: |
| raise Exception("Unexpected debug level(3): " + level) |
| if "Timestamp: 1" not in level: |
| raise Exception("Unexpected timestamp(3): " + level) |
| |
| def test_wpas_ctrl_enable_disable_network(dev, apdev): |
| """wpa_supplicant ctrl_iface ENABLE/DISABLE_NETWORK""" |
| params = { "ssid": "test" } |
| hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| id = dev[0].connect("test", key_mgmt="NONE", scan_freq="2412", |
| only_add_network=True) |
| if "OK" not in dev[0].request("DISABLE_NETWORK " + str(id)): |
| raise Exception("Failed to disable network") |
| if "OK" not in dev[0].request("ENABLE_NETWORK " + str(id) + " no-connect"): |
| raise Exception("Failed to enable network") |
| if "OK" not in dev[0].request("DISABLE_NETWORK all"): |
| raise Exception("Failed to disable networks") |
| if "OK" not in dev[0].request("ENABLE_NETWORK " + str(id)): |
| raise Exception("Failed to enable network") |
| dev[0].wait_connected(timeout=10) |
| if "OK" not in dev[0].request("DISABLE_NETWORK " + str(id)): |
| raise Exception("Failed to disable network") |
| dev[0].wait_disconnected(timeout=10) |
| time.sleep(0.1) |
| |
| if "OK" not in dev[0].request("ENABLE_NETWORK all"): |
| raise Exception("Failed to enable network") |
| dev[0].wait_connected(timeout=10) |
| if "OK" not in dev[0].request("DISABLE_NETWORK all"): |
| raise Exception("Failed to disable network") |
| dev[0].wait_disconnected(timeout=10) |
| |
| def test_wpas_ctrl_country(dev, apdev): |
| """wpa_supplicant SET/GET country code""" |
| try: |
| # work around issues with possible pending regdom event from the end of |
| # the previous test case |
| time.sleep(0.2) |
| dev[0].dump_monitor() |
| |
| if "OK" not in dev[0].request("SET country FI"): |
| raise Exception("Failed to set country code") |
| if dev[0].request("GET country") != "FI": |
| raise Exception("Country code set failed") |
| ev = dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"]) |
| if ev is None: |
| raise Exception("regdom change event not seen") |
| if "init=USER type=COUNTRY alpha2=FI" not in ev: |
| raise Exception("Unexpected event contents: " + ev) |
| dev[0].request("SET country 00") |
| if dev[0].request("GET country") != "00": |
| raise Exception("Country code set failed") |
| ev = dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"]) |
| if ev is None: |
| raise Exception("regdom change event not seen") |
| if "init=CORE type=WORLD" not in ev: |
| raise Exception("Unexpected event contents: " + ev) |
| finally: |
| subprocess.call(['iw', 'reg', 'set', '00']) |
| |
| def test_wpas_ctrl_suspend_resume(dev): |
| """wpa_supplicant SUSPEND/RESUME""" |
| wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5') |
| wpas.interface_add("wlan5") |
| if "OK" not in wpas.global_request("SUSPEND"): |
| raise Exception("SUSPEND failed") |
| time.sleep(1) |
| if "OK" not in wpas.global_request("RESUME"): |
| raise Exception("RESUME failed") |
| if "OK" not in wpas.request("SUSPEND"): |
| raise Exception("Per-interface SUSPEND failed") |
| if "OK" not in wpas.request("RESUME"): |
| raise Exception("Per-interface RESUME failed") |
| ev = wpas.wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10) |
| if ev is None: |
| raise Exception("Scan not completed") |
| |
| def test_wpas_ctrl_global(dev): |
| """wpa_supplicant global control interface""" |
| wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5') |
| wpas.interface_add("wlan5") |
| |
| if "PONG" not in wpas.global_request("PING"): |
| raise Exception("PING failed") |
| if "wlan5" not in wpas.global_request("INTERFACES"): |
| raise Exception("Interface not found") |
| if "UNKNOWN COMMAND" not in wpas.global_request("FOO"): |
| raise Exception("Unexpected response to unknown command") |
| if "PONG" not in wpas.global_request("IFNAME=wlan5 PING"): |
| raise Exception("Per-interface PING failed") |
| if "FAIL-NO-IFNAME-MATCH" not in wpas.global_request("IFNAME=notfound PING"): |
| raise Exception("Unknown interface not reported correctly") |
| if "FAIL" not in wpas.global_request("SAVE_CONFIG"): |
| raise Exception("SAVE_CONFIG succeeded unexpectedly") |
| if "OK" not in wpas.global_request("SET wifi_display 0"): |
| raise Exception("SET failed") |
| if "wifi_display=0" not in wpas.global_request("STATUS"): |
| raise Exception("wifi_display not disabled") |
| if "OK" not in wpas.global_request("SET wifi_display 1"): |
| raise Exception("SET failed") |
| if "wifi_display=1" not in wpas.global_request("STATUS"): |
| raise Exception("wifi_display not enabled") |
| if "FAIL" not in wpas.global_request("SET foo 1"): |
| raise Exception("SET succeeded unexpectedly") |
| |
| if "p2p_state=IDLE" not in wpas.global_request("STATUS"): |
| raise Exception("P2P was disabled") |
| wpas.global_request("P2P_SET disabled 1") |
| if "p2p_state=DISABLED" not in wpas.global_request("STATUS"): |
| raise Exception("P2P was not disabled") |
| wpas.global_request("P2P_SET disabled 0") |
| if "p2p_state=IDLE" not in wpas.global_request("STATUS"): |
| raise Exception("P2P was not enabled") |
| |
| # driver_nl80211.c does not support interface list, so do not fail because |
| # of that |
| logger.debug(wpas.global_request("INTERFACE_LIST")) |
| |
| if "FAIL" not in wpas.global_request("INTERFACE_ADD "): |
| raise Exception("INTERFACE_ADD succeeded unexpectedly") |
| if "FAIL" not in wpas.global_request("INTERFACE_ADD FOO"): |
| raise Exception("INTERFACE_ADD succeeded unexpectedly") |
| if "FAIL" not in wpas.global_request("INTERFACE_ADD FOO conf"): |
| raise Exception("INTERFACE_ADD succeeded unexpectedly") |
| if "FAIL" not in wpas.global_request("INTERFACE_ADD FOO conf driver"): |
| raise Exception("INTERFACE_ADD succeeded unexpectedly") |
| if "FAIL" not in wpas.global_request("INTERFACE_ADD FOO conf driver ctrliface"): |
| raise Exception("INTERFACE_ADD succeeded unexpectedly") |
| if "FAIL" not in wpas.global_request("INTERFACE_ADD FOO conf driver ctrliface driverparam"): |
| raise Exception("INTERFACE_ADD succeeded unexpectedly") |
| if "FAIL" not in wpas.global_request("INTERFACE_ADD FOO conf driver ctrliface driverparam bridge"): |
| raise Exception("INTERFACE_ADD succeeded unexpectedly") |
| if "FAIL" not in wpas.global_request("INTERFACE_ADD FOO conf driver ctrliface driverparam bridge foo"): |
| raise Exception("INTERFACE_ADD succeeded unexpectedly") |
| if "FAIL" not in wpas.global_request("INTERFACE_ADD FOO "): |
| raise Exception("INTERFACE_ADD succeeded unexpectedly") |
| |
| def test_wpas_ctrl_roam(dev, apdev): |
| """wpa_supplicant ctrl_iface ROAM error cases""" |
| if "FAIL" not in dev[0].request("ROAM 00:11:22:33:44"): |
| raise Exception("Unexpected success") |
| if "FAIL" not in dev[0].request("ROAM 00:11:22:33:44:55"): |
| raise Exception("Unexpected success") |
| params = { "ssid": "test" } |
| hostapd.add_ap(apdev[0]['ifname'], params) |
| id = dev[0].connect("test", key_mgmt="NONE", scan_freq="2412") |
| if "FAIL" not in dev[0].request("ROAM 00:11:22:33:44:55"): |
| raise Exception("Unexpected success") |
| |
| def test_wpas_ctrl_ipaddr(dev, apdev): |
| """wpa_supplicant IP address in STATUS""" |
| try: |
| subprocess.call(['ip', 'addr', 'add', '10.174.65.207/32', 'dev', |
| dev[0].ifname]) |
| ipaddr = dev[0].get_status_field('ip_address') |
| if ipaddr != '10.174.65.207': |
| raise Exception("IP address not in STATUS output") |
| finally: |
| subprocess.call(['ip', 'addr', 'del', '10.174.65.207/32', 'dev', |
| dev[0].ifname]) |
| |
| def test_wpas_ctrl_neighbor_rep_req(dev, apdev): |
| """wpa_supplicant ctrl_iface NEIGHBOR_REP_REQUEST""" |
| params = { "ssid": "test" } |
| hostapd.add_ap(apdev[0]['ifname'], params) |
| params = { "ssid": "test2", "radio_measurements": "1" } |
| hostapd.add_ap(apdev[1]['ifname'], params) |
| |
| dev[0].connect("test", key_mgmt="NONE", scan_freq="2412") |
| if "FAIL" not in dev[0].request("NEIGHBOR_REP_REQUEST"): |
| raise Exception("Request succeeded unexpectedly") |
| if "FAIL" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=abcdef"): |
| raise Exception("Request succeeded unexpectedly") |
| dev[0].request("DISCONNECT") |
| |
| rrm = int(dev[0].get_driver_status_field("capa.rrm_flags"), 16) |
| if rrm & 0x5 != 0x5: |
| logger.info("Driver does not support required RRM capabilities - skip rest of the test case") |
| return |
| |
| dev[0].connect("test2", key_mgmt="NONE", scan_freq="2412") |
| |
| # These requests are expected to get sent properly, but since hostapd does |
| # not yet support processing of the request, these are expected to fail. |
| |
| if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST"): |
| raise Exception("Request failed") |
| ev = dev[0].wait_event([ "RRM-NEIGHBOR-REP-RECEIVED", |
| "RRM-NEIGHBOR-REP-REQUEST-FAILED" ], timeout=10) |
| if ev is None: |
| raise Exception("RRM report result not indicated") |
| logger.info("RRM result: " + ev) |
| |
| if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=abcdef"): |
| raise Exception("Request failed") |
| ev = dev[0].wait_event([ "RRM-NEIGHBOR-REP-RECEIVED", |
| "RRM-NEIGHBOR-REP-REQUEST-FAILED" ], timeout=10) |
| if ev is None: |
| raise Exception("RRM report result not indicated") |
| logger.info("RRM result: " + ev) |
| |
| def test_wpas_ctrl_rsp(dev, apdev): |
| """wpa_supplicant ctrl_iface CTRL-RSP-""" |
| if "FAIL" not in dev[0].request("CTRL-RSP-"): |
| raise Exception("Request succeeded unexpectedly") |
| if "FAIL" not in dev[0].request("CTRL-RSP-foo-"): |
| raise Exception("Request succeeded unexpectedly") |
| if "FAIL" not in dev[0].request("CTRL-RSP-foo-1234567"): |
| raise Exception("Request succeeded unexpectedly") |
| if "FAIL" not in dev[0].request("CTRL-RSP-foo-1234567:"): |
| raise Exception("Request succeeded unexpectedly") |
| id = dev[0].add_network() |
| if "FAIL" not in dev[0].request("CTRL-RSP-foo-%d:" % id): |
| raise Exception("Request succeeded unexpectedly") |
| for req in [ "IDENTITY", "PASSWORD", "NEW_PASSWORD", "PIN", "OTP", |
| "PASSPHRASE", "SIM" ]: |
| if "OK" not in dev[0].request("CTRL-RSP-%s-%d:" % (req, id)): |
| raise Exception("Request failed unexpectedly") |
| if "OK" not in dev[0].request("CTRL-RSP-%s-%d:" % (req, id)): |
| raise Exception("Request failed unexpectedly") |
| |
| def test_wpas_ctrl_vendor(dev, apdev): |
| """wpa_supplicant ctrl_iface VENDOR""" |
| cmds = [ "foo", |
| "1", |
| "1 foo", |
| "1 2foo", |
| "1 2 qq" ] |
| for cmd in cmds: |
| if "FAIL" not in dev[0].request("VENDOR " + cmd): |
| raise Exception("Invalid VENDOR command accepted: " + cmd) |
| |
| def test_wpas_ctrl_mgmt_tx(dev, apdev): |
| """wpa_supplicant ctrl_iface MGMT_TX""" |
| cmds = [ "foo", |
| "00:11:22:33:44:55 foo", |
| "00:11:22:33:44:55 11:22:33:44:55:66", |
| "00:11:22:33:44:55 11:22:33:44:55:66 freq=0 no_cck=0 wait_time=0 action=123", |
| "00:11:22:33:44:55 11:22:33:44:55:66 action=12qq" ] |
| for cmd in cmds: |
| if "FAIL" not in dev[0].request("MGMT_TX " + cmd): |
| raise Exception("Invalid MGMT_TX command accepted: " + cmd) |
| |
| if "OK" not in dev[0].request("MGMT_TX_DONE"): |
| raise Exception("MGMT_TX_DONE failed") |
| |
| def test_wpas_ctrl_driver_event(dev, apdev): |
| """wpa_supplicant ctrl_iface DRIVER_EVENT""" |
| if "FAIL" not in dev[0].request("DRIVER_EVENT foo"): |
| raise Exception("Invalid DRIVER_EVENT accepted") |
| |
| def test_wpas_ctrl_eapol_rx(dev, apdev): |
| """wpa_supplicant ctrl_iface EAPOL_RX""" |
| cmds = [ "foo", |
| "00:11:22:33:44:55 123", |
| "00:11:22:33:44:55 12qq" ] |
| for cmd in cmds: |
| if "FAIL" not in dev[0].request("EAPOL_RX " + cmd): |
| raise Exception("Invalid EAPOL_RX command accepted: " + cmd) |
| |
| def test_wpas_ctrl_data_test(dev, apdev): |
| """wpa_supplicant ctrl_iface DATA_TEST""" |
| dev[0].request("DATA_TEST_CONFIG 0") |
| if "FAIL" not in dev[0].request("DATA_TEST_TX 00:11:22:33:44:55 00:11:22:33:44:55 0"): |
| raise Exception("DATA_TEST_TX accepted when not in test mode") |
| |
| try: |
| if "OK" not in dev[0].request("DATA_TEST_CONFIG 1"): |
| raise Exception("DATA_TEST_CONFIG failed") |
| if "OK" not in dev[0].request("DATA_TEST_CONFIG 1"): |
| raise Exception("DATA_TEST_CONFIG failed") |
| cmds = [ "foo", |
| "00:11:22:33:44:55 foo", |
| "00:11:22:33:44:55 00:11:22:33:44:55 -1", |
| "00:11:22:33:44:55 00:11:22:33:44:55 256" ] |
| for cmd in cmds: |
| if "FAIL" not in dev[0].request("DATA_TEST_TX " + cmd): |
| raise Exception("Invalid DATA_TEST_TX command accepted: " + cmd) |
| if "OK" not in dev[0].request("DATA_TEST_TX 00:11:22:33:44:55 00:11:22:33:44:55 0"): |
| raise Exception("DATA_TEST_TX failed") |
| finally: |
| dev[0].request("DATA_TEST_CONFIG 0") |
| |
| cmds = [ "", |
| "00", |
| "00112233445566778899aabbccdde", |
| "00112233445566778899aabbccdq" ] |
| for cmd in cmds: |
| if "FAIL" not in dev[0].request("DATA_TEST_FRAME " + cmd): |
| raise Exception("Invalid DATA_TEST_FRAME command accepted: " + cmd) |
| |
| if "OK" not in dev[0].request("DATA_TEST_FRAME 00112233445566778899aabbccddee"): |
| raise Exception("DATA_TEST_FRAME failed") |
| |
| def test_wpas_ctrl_vendor_elem(dev, apdev): |
| """wpa_supplicant ctrl_iface VENDOR_ELEM""" |
| if "OK" not in dev[0].request("VENDOR_ELEM_ADD 1 "): |
| raise Exception("VENDOR_ELEM_ADD failed") |
| cmds = [ "-1 ", |
| "255 ", |
| "1", |
| "1 123", |
| "1 12qq34" ] |
| for cmd in cmds: |
| if "FAIL" not in dev[0].request("VENDOR_ELEM_ADD " + cmd): |
| raise Exception("Invalid VENDOR_ELEM_ADD command accepted: " + cmd) |
| |
| cmds = [ "-1 ", |
| "255 " ] |
| for cmd in cmds: |
| if "FAIL" not in dev[0].request("VENDOR_ELEM_GET " + cmd): |
| raise Exception("Invalid VENDOR_ELEM_GET command accepted: " + cmd) |
| |
| dev[0].request("VENDOR_ELEM_REMOVE 1 *") |
| cmds = [ "-1 ", |
| "255 ", |
| "1", |
| "1", |
| "1 123", |
| "1 12qq34", |
| "1 12", |
| "1 0000" ] |
| for cmd in cmds: |
| if "FAIL" not in dev[0].request("VENDOR_ELEM_REMOVE " + cmd): |
| raise Exception("Invalid VENDOR_ELEM_REMOVE command accepted: " + cmd) |
| |
| dev[0].request("VENDOR_ELEM_ADD 1 000100") |
| if "OK" not in dev[0].request("VENDOR_ELEM_REMOVE 1 "): |
| raise Exception("VENDOR_ELEM_REMOVE failed") |
| cmds = [ "-1 ", |
| "255 ", |
| "1", |
| "1 123", |
| "1 12qq34", |
| "1 12", |
| "1 0000" ] |
| for cmd in cmds: |
| if "FAIL" not in dev[0].request("VENDOR_ELEM_REMOVE " + cmd): |
| raise Exception("Invalid VENDOR_ELEM_REMOVE command accepted: " + cmd) |
| if "OK" not in dev[0].request("VENDOR_ELEM_REMOVE 1 000100"): |
| raise Exception("VENDOR_ELEM_REMOVE failed") |
| |
| def test_wpas_ctrl_misc(dev, apdev): |
| """wpa_supplicant ctrl_iface and miscellaneous commands""" |
| if "OK" not in dev[0].request("RELOG"): |
| raise Exception("RELOG failed") |
| if dev[0].request("IFNAME") != dev[0].ifname: |
| raise Exception("IFNAME returned unexpected response") |
| if "FAIL" not in dev[0].request("REATTACH"): |
| raise Exception("REATTACH accepted while disabled") |
| if "OK" not in dev[2].request("RECONFIGURE"): |
| raise Exception("RECONFIGURE failed") |
| if "FAIL" in dev[0].request("INTERFACE_LIST"): |
| raise Exception("INTERFACE_LIST failed") |
| if "UNKNOWN COMMAND" not in dev[0].request("FOO"): |
| raise Exception("Unknown command accepted") |
| |
| if "FAIL" not in dev[0].global_request("INTERFACE_REMOVE foo"): |
| raise Exception("Invalid INTERFACE_REMOVE accepted") |
| if "FAIL" not in dev[0].global_request("SET foo"): |
| raise Exception("Invalid global SET accepted") |
| |
| def test_wpas_ctrl_dump(dev, apdev): |
| """wpa_supplicant ctrl_iface and DUMP/GET global parameters""" |
| vals = dev[0].get_config() |
| logger.info("Config values from DUMP: " + str(vals)) |
| for field in vals: |
| res = dev[0].request("GET " + field) |
| if res == 'FAIL\n': |
| res = "null" |
| if res != vals[field]: |
| print "'{}' != '{}'".format(res, vals[field]) |
| raise Exception("Mismatch in config field " + field) |
| if "beacon_int" not in vals: |
| raise Exception("Missing config field") |