| /* |
| * Qualcomm Atheros OUI and vendor specific assignments |
| * Copyright (c) 2014, Qualcomm Atheros, Inc. |
| * |
| * This software may be distributed under the terms of the BSD license. |
| * See README for more details. |
| */ |
| |
| #ifndef QCA_VENDOR_H |
| #define QCA_VENDOR_H |
| |
| /* |
| * This file is a registry of identifier assignments from the Qualcomm Atheros |
| * OUI 00:13:74 for purposes other than MAC address assignment. New identifiers |
| * can be assigned through normal review process for changes to the upstream |
| * hostap.git repository. |
| */ |
| |
| #define OUI_QCA 0x001374 |
| |
| /** |
| * enum qca_radiotap_vendor_ids - QCA radiotap vendor namespace IDs |
| */ |
| enum qca_radiotap_vendor_ids { |
| QCA_RADIOTAP_VID_WLANTEST = 0, |
| }; |
| |
| /** |
| * enum qca_nl80211_vendor_subcmds - QCA nl80211 vendor command identifiers |
| * |
| * @QCA_NL80211_VENDOR_SUBCMD_UNSPEC: Reserved value 0 |
| * |
| * @QCA_NL80211_VENDOR_SUBCMD_TEST: Test command/event |
| * |
| * @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Set roaming policy for drivers that use |
| * internal BSS-selection. This command uses |
| * @QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY to specify the new roaming policy |
| * for the current connection (i.e., changes policy set by the nl80211 |
| * Connect command). @QCA_WLAN_VENDOR_ATTR_MAC_ADDR may optionally be |
| * included to indicate which BSS to use in case roaming is disabled. |
| * |
| * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Recommendation of frequency |
| * ranges to avoid to reduce issues due to interference or internal |
| * co-existence information in the driver. The event data structure is |
| * defined in struct qca_avoid_freq_list. |
| * |
| * @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: Command to check driver support |
| * for DFS offloading. |
| * |
| * @QCA_NL80211_VENDOR_SUBCMD_NAN: NAN command/event which is used to pass |
| * NAN Request/Response and NAN Indication messages. These messages are |
| * interpreted between the framework and the firmware component. |
| * |
| * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Set key operation that can be |
| * used to configure PMK to the driver even when not connected. This can |
| * be used to request offloading of key management operations. Only used |
| * if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD. |
| * |
| * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: An extended version of |
| * NL80211_CMD_ROAM event with optional attributes including information |
| * from offloaded key management operation. Uses |
| * enum qca_wlan_vendor_attr_roam_auth attributes. Only used |
| * if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD. |
| * |
| * @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS command/event which is used to |
| * invoke the ACS function in device and pass selected channels to |
| * hostapd. |
| * |
| * @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Command to get the features |
| * supported by the driver. enum qca_wlan_vendor_features defines |
| * the possible features. |
| */ |
| enum qca_nl80211_vendor_subcmds { |
| QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0, |
| QCA_NL80211_VENDOR_SUBCMD_TEST = 1, |
| /* subcmds 2..8 not yet allocated */ |
| QCA_NL80211_VENDOR_SUBCMD_ROAMING = 9, |
| QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY = 10, |
| QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY = 11, |
| QCA_NL80211_VENDOR_SUBCMD_NAN = 12, |
| QCA_NL80211_VENDOR_SUBMCD_STATS_EXT = 13, |
| QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET = 14, |
| QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET = 15, |
| QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR = 16, |
| QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS = 17, |
| QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS = 18, |
| QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS = 19, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_START = 20, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_STOP = 21, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS = 22, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CAPABILITIES = 23, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS = 24, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE = 25, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT = 26, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT = 27, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND = 28, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_BSSID_HOTLIST = 29, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_BSSID_HOTLIST = 30, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE = 31, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SIGNIFICANT_CHANGE = 32, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SIGNIFICANT_CHANGE = 33, |
| QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE = 34, |
| QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE = 35, |
| QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS = 36, |
| QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE = 37, |
| QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES = 38, |
| QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI = 39, |
| QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG = 40, |
| QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_LOST = 41, |
| QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX = 42, |
| /* 43..49 - reserved for QCA */ |
| QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50, |
| QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51, |
| QCA_NL80211_VENDOR_SUBCMD_APFIND = 52, |
| /* 53 - reserved for QCA */ |
| QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54, |
| QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55, |
| }; |
| |
| |
| enum qca_wlan_vendor_attr { |
| QCA_WLAN_VENDOR_ATTR_INVALID = 0, |
| /* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */ |
| QCA_WLAN_VENDOR_ATTR_DFS = 1, |
| /* used by QCA_NL80211_VENDOR_SUBCMD_NAN */ |
| QCA_WLAN_VENDOR_ATTR_NAN = 2, |
| /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */ |
| QCA_WLAN_VENDOR_ATTR_STATS_EXT = 3, |
| /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */ |
| QCA_WLAN_VENDOR_ATTR_IFINDEX = 4, |
| /* used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined |
| * by enum qca_roaming_policy. */ |
| QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5, |
| QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6, |
| /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */ |
| QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7, |
| /* keep last */ |
| QCA_WLAN_VENDOR_ATTR_AFTER_LAST, |
| QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1, |
| }; |
| |
| |
| enum qca_roaming_policy { |
| QCA_ROAMING_NOT_ALLOWED, |
| QCA_ROAMING_ALLOWED_WITHIN_ESS, |
| }; |
| |
| enum qca_wlan_vendor_attr_roam_auth { |
| QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0, |
| QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID, |
| QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE, |
| QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE, |
| QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED, |
| QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR, |
| QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK, |
| QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK, |
| /* keep last */ |
| QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST, |
| QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX = |
| QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1 |
| }; |
| |
| enum qca_wlan_vendor_attr_acs_offload { |
| QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0, |
| QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL, |
| QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL, |
| QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE, |
| QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED, |
| QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED, |
| /* keep last */ |
| QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST, |
| QCA_WLAN_VENDOR_ATTR_ACS_MAX = |
| QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1 |
| }; |
| |
| enum qca_wlan_vendor_acs_hw_mode { |
| QCA_ACS_MODE_IEEE80211B, |
| QCA_ACS_MODE_IEEE80211G, |
| QCA_ACS_MODE_IEEE80211A, |
| QCA_ACS_MODE_IEEE80211AD, |
| }; |
| |
| /** |
| * enum qca_wlan_vendor_features - Vendor device/driver feature flags |
| * |
| * @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key |
| * management offload, a mechanism where the station's firmware |
| * does the exchange with the AP to establish the temporal keys |
| * after roaming, rather than having the user space wpa_supplicant do it. |
| * @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits |
| */ |
| enum qca_wlan_vendor_features { |
| QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD = 0, |
| NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */ |
| }; |
| |
| #endif /* QCA_VENDOR_H */ |