| # EAP Re-authentication Protocol (ERP) tests |
| # Copyright (c) 2014, Jouni Malinen <j@w1.fi> |
| # |
| # This software may be distributed under the terms of the BSD license. |
| # See README for more details. |
| |
| import logging |
| logger = logging.getLogger() |
| |
| import hostapd |
| from test_ap_eap import int_eap_server_params |
| |
| def test_erp_initiate_reauth_start(dev, apdev): |
| """Authenticator sending EAP-Initiate/Re-auth-Start, but ERP disabled on peer""" |
| params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") |
| params['erp_send_reauth_start'] = '1' |
| params['erp_domain'] = 'example.com' |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| dev[0].request("ERP_FLUSH") |
| dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", |
| eap="PAX", identity="pax.user@example.com", |
| password_hex="0123456789abcdef0123456789abcdef", |
| scan_freq="2412") |
| |
| def test_erp_enabled_on_server(dev, apdev): |
| """ERP enabled on internal EAP server, but disabled on peer""" |
| params = int_eap_server_params() |
| params['erp_send_reauth_start'] = '1' |
| params['erp_domain'] = 'example.com' |
| params['eap_server_erp'] = '1' |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| dev[0].request("ERP_FLUSH") |
| dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", |
| eap="PAX", identity="pax.user@example.com", |
| password_hex="0123456789abcdef0123456789abcdef", |
| scan_freq="2412") |
| |
| def test_erp(dev, apdev): |
| """ERP enabled on server and peer""" |
| capab = dev[0].get_capability("erp") |
| if not capab or 'ERP' not in capab: |
| return "skip" |
| params = int_eap_server_params() |
| params['erp_send_reauth_start'] = '1' |
| params['erp_domain'] = 'example.com' |
| params['eap_server_erp'] = '1' |
| params['disable_pmksa_caching'] = '1' |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| dev[0].request("ERP_FLUSH") |
| dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", |
| eap="PSK", identity="psk.user@example.com", |
| password_hex="0123456789abcdef0123456789abcdef", |
| erp="1", scan_freq="2412") |
| for i in range(3): |
| dev[0].request("DISCONNECT") |
| dev[0].wait_disconnected(timeout=15) |
| dev[0].request("RECONNECT") |
| ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=15) |
| if ev is None: |
| raise Exception("EAP success timed out") |
| if "EAP re-authentication completed successfully" not in ev: |
| raise Exception("Did not use ERP") |
| dev[0].wait_connected(timeout=15, error="Reconnection timed out") |
| |
| def test_erp_server_no_match(dev, apdev): |
| """ERP enabled on server and peer, but server has no key match""" |
| capab = dev[0].get_capability("erp") |
| if not capab or 'ERP' not in capab: |
| return "skip" |
| params = int_eap_server_params() |
| params['erp_send_reauth_start'] = '1' |
| params['erp_domain'] = 'example.com' |
| params['eap_server_erp'] = '1' |
| params['disable_pmksa_caching'] = '1' |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| dev[0].request("ERP_FLUSH") |
| id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", |
| eap="PSK", identity="psk.user@example.com", |
| password_hex="0123456789abcdef0123456789abcdef", |
| erp="1", scan_freq="2412") |
| dev[0].request("DISCONNECT") |
| dev[0].wait_disconnected(timeout=15) |
| hapd.request("ERP_FLUSH") |
| dev[0].request("RECONNECT") |
| ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS", |
| "CTRL-EVENT-EAP-FAILURE"], timeout=15) |
| if ev is None: |
| raise Exception("EAP result timed out") |
| if "CTRL-EVENT-EAP-SUCCESS" in ev: |
| raise Exception("Unexpected EAP success") |
| dev[0].request("DISCONNECT") |
| dev[0].select_network(id) |
| ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=15) |
| if ev is None: |
| raise Exception("EAP success timed out") |
| if "EAP re-authentication completed successfully" in ev: |
| raise Exception("Unexpected use of ERP") |
| dev[0].wait_connected(timeout=15, error="Reconnection timed out") |
| |
| def start_erp_as(apdev): |
| params = { "ssid": "as", "beacon_int": "2000", |
| "radius_server_clients": "auth_serv/radius_clients.conf", |
| "radius_server_auth_port": '18128', |
| "eap_server": "1", |
| "eap_user_file": "auth_serv/eap_user.conf", |
| "ca_cert": "auth_serv/ca.pem", |
| "server_cert": "auth_serv/server.pem", |
| "private_key": "auth_serv/server.key", |
| "eap_sim_db": "unix:/tmp/hlr_auc_gw.sock", |
| "dh_file": "auth_serv/dh.conf", |
| "pac_opaque_encr_key": "000102030405060708090a0b0c0d0e0f", |
| "eap_fast_a_id": "101112131415161718191a1b1c1d1e1f", |
| "eap_fast_a_id_info": "test server", |
| "eap_server_erp": "1", |
| "erp_domain": "example.com" } |
| hostapd.add_ap(apdev['ifname'], params) |
| |
| def test_erp_radius(dev, apdev): |
| """ERP enabled on RADIUS server and peer""" |
| capab = dev[0].get_capability("erp") |
| if not capab or 'ERP' not in capab: |
| return "skip" |
| start_erp_as(apdev[1]) |
| params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") |
| params['auth_server_port'] = "18128" |
| params['erp_send_reauth_start'] = '1' |
| params['erp_domain'] = 'example.com' |
| params['disable_pmksa_caching'] = '1' |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| dev[0].request("ERP_FLUSH") |
| dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", |
| eap="PSK", identity="psk.user@example.com", |
| password_hex="0123456789abcdef0123456789abcdef", |
| erp="1", scan_freq="2412") |
| for i in range(3): |
| dev[0].request("DISCONNECT") |
| dev[0].wait_disconnected(timeout=15) |
| dev[0].request("RECONNECT") |
| ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=15) |
| if ev is None: |
| raise Exception("EAP success timed out") |
| if "EAP re-authentication completed successfully" not in ev: |
| raise Exception("Did not use ERP") |
| dev[0].wait_connected(timeout=15, error="Reconnection timed out") |
| |
| def erp_test(dev, hapd, **kwargs): |
| hapd.dump_monitor() |
| dev.dump_monitor() |
| dev.request("ERP_FLUSH") |
| id = dev.connect("test-wpa2-eap", key_mgmt="WPA-EAP", erp="1", |
| scan_freq="2412", **kwargs) |
| dev.request("DISCONNECT") |
| dev.wait_disconnected(timeout=15) |
| hapd.dump_monitor() |
| dev.request("RECONNECT") |
| ev = dev.wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=15) |
| if ev is None: |
| raise Exception("EAP success timed out") |
| if "EAP re-authentication completed successfully" not in ev: |
| raise Exception("Did not use ERP") |
| dev.wait_connected(timeout=15, error="Reconnection timed out") |
| ev = hapd.wait_event([ "AP-STA-CONNECTED" ], timeout=5) |
| if ev is None: |
| raise Exception("No connection event received from hostapd") |
| dev.request("DISCONNECT") |
| |
| def test_erp_radius_eap_methods(dev, apdev): |
| """ERP enabled on RADIUS server and peer""" |
| capab = dev[0].get_capability("erp") |
| if not capab or 'ERP' not in capab: |
| return "skip" |
| start_erp_as(apdev[1]) |
| params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") |
| params['auth_server_port'] = "18128" |
| params['erp_send_reauth_start'] = '1' |
| params['erp_domain'] = 'example.com' |
| params['disable_pmksa_caching'] = '1' |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| erp_test(dev[0], hapd, eap="AKA", identity="0232010000000000@example.com", |
| password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123") |
| erp_test(dev[0], hapd, eap="AKA'", identity="6555444333222111@example.com", |
| password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123") |
| # TODO: EKE getSession |
| #erp_test(dev[0], hapd, eap="EKE", identity="erp-eke@example.com", |
| # password="hello") |
| erp_test(dev[0], hapd, eap="FAST", identity="erp-fast@example.com", |
| password="password", ca_cert="auth_serv/ca.pem", phase2="auth=GTC", |
| phase1="fast_provisioning=2", pac_file="blob://fast_pac_auth_erp") |
| erp_test(dev[0], hapd, eap="GPSK", identity="erp-gpsk@example.com", |
| password="abcdefghijklmnop0123456789abcdef") |
| erp_test(dev[0], hapd, eap="IKEV2", identity="erp-ikev2@example.com", |
| password="password") |
| erp_test(dev[0], hapd, eap="PAX", identity="erp-pax@example.com", |
| password_hex="0123456789abcdef0123456789abcdef") |
| # TODO: PEAP (EMSK) |
| #erp_test(dev[0], hapd, eap="PEAP", identity="erp-peap@example.com", |
| # password="password", ca_cert="auth_serv/ca.pem", |
| # phase2="auth=MSCHAPV2") |
| erp_test(dev[0], hapd, eap="PSK", identity="erp-psk@example.com", |
| password_hex="0123456789abcdef0123456789abcdef") |
| erp_test(dev[0], hapd, eap="PWD", identity="erp-pwd@example.com", |
| password="secret password") |
| erp_test(dev[0], hapd, eap="SAKE", identity="erp-sake@example.com", |
| password_hex="0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef") |
| erp_test(dev[0], hapd, eap="SIM", identity="1232010000000000@example.com", |
| password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581") |
| erp_test(dev[0], hapd, eap="TLS", identity="erp-tls@example.com", |
| ca_cert="auth_serv/ca.pem", client_cert="auth_serv/user.pem", |
| private_key="auth_serv/user.key") |
| erp_test(dev[0], hapd, eap="TTLS", identity="erp-ttls@example.com", |
| password="password", ca_cert="auth_serv/ca.pem", phase2="auth=PAP") |