| # Test cases for VHT operations with hostapd |
| # Copyright (c) 2014, Qualcomm Atheros, Inc. |
| # Copyright (c) 2013, Intel Corporation |
| # |
| # This software may be distributed under the terms of the BSD license. |
| # See README for more details. |
| |
| import logging |
| logger = logging.getLogger() |
| import os |
| import subprocess, time |
| |
| import hwsim_utils |
| import hostapd |
| from test_dfs import wait_dfs_event |
| from test_ap_csa import csa_supported |
| |
| def vht_supported(): |
| cmd = subprocess.Popen(["iw", "reg", "get"], stdout=subprocess.PIPE) |
| reg = cmd.stdout.read() |
| if "@ 80)" in reg or "@ 160)" in reg: |
| return True |
| return False |
| |
| def test_ap_vht80(dev, apdev): |
| """VHT with 80 MHz channel width""" |
| try: |
| hapd = None |
| params = { "ssid": "vht", |
| "country_code": "FI", |
| "hw_mode": "a", |
| "channel": "36", |
| "ht_capab": "[HT40+]", |
| "ieee80211n": "1", |
| "ieee80211ac": "1", |
| "vht_oper_chwidth": "1", |
| "vht_oper_centr_freq_seg0_idx": "42" } |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180") |
| hwsim_utils.test_connectivity(dev[0], hapd) |
| except Exception, e: |
| if isinstance(e, Exception) and str(e) == "AP startup failed": |
| if not vht_supported(): |
| logger.info("80 MHz channel not supported in regulatory information") |
| return "skip" |
| raise |
| finally: |
| dev[0].request("DISCONNECT") |
| if hapd: |
| hapd.request("DISABLE") |
| subprocess.call(['sudo', 'iw', 'reg', 'set', '00']) |
| dev[0].flush_scan_cache() |
| |
| def test_ap_vht80_params(dev, apdev): |
| """VHT with 80 MHz channel width and number of optional features enabled""" |
| try: |
| hapd = None |
| params = { "ssid": "vht", |
| "country_code": "FI", |
| "hw_mode": "a", |
| "channel": "36", |
| "ht_capab": "[HT40+][SHORT-GI-40][DSS_CCK-40]", |
| "ieee80211n": "1", |
| "ieee80211ac": "1", |
| "vht_oper_chwidth": "1", |
| "vht_capab": "[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][MAX-A-MPDU-LEN-EXP0]", |
| "vht_oper_centr_freq_seg0_idx": "42", |
| "require_vht": "1" } |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| dev[1].connect("vht", key_mgmt="NONE", scan_freq="5180", |
| disable_vht="1", wait_connect=False) |
| dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180") |
| ev = dev[1].wait_event(["CTRL-EVENT-ASSOC-REJECT"]) |
| if ev is None: |
| raise Exception("Association rejection timed out") |
| if "status_code=104" not in ev: |
| raise Exception("Unexpected rejection status code") |
| dev[1].request("DISCONNECT") |
| hwsim_utils.test_connectivity(dev[0], hapd) |
| except Exception, e: |
| if isinstance(e, Exception) and str(e) == "AP startup failed": |
| if not vht_supported(): |
| logger.info("80 MHz channel not supported in regulatory information") |
| return "skip" |
| raise |
| finally: |
| dev[0].request("DISCONNECT") |
| dev[1].request("DISCONNECT") |
| if hapd: |
| hapd.request("DISABLE") |
| subprocess.call(['sudo', 'iw', 'reg', 'set', '00']) |
| dev[0].flush_scan_cache() |
| dev[1].flush_scan_cache() |
| |
| def test_ap_vht_20(devs, apdevs): |
| """VHT and 20 MHz channel""" |
| dev = devs[0] |
| ap = apdevs[0] |
| try: |
| hapd = None |
| params = { "ssid": "test-vht20", |
| "country_code": "DE", |
| "hw_mode": "a", |
| "channel": "36", |
| "ieee80211n": "1", |
| "ieee80211ac": "1", |
| "ht_capab": "", |
| "vht_capab": "", |
| "vht_oper_chwidth": "0", |
| "vht_oper_centr_freq_seg0_idx": "0", |
| "supported_rates": "60 120 240 360 480 540", |
| "require_vht": "1", |
| } |
| hapd = hostapd.add_ap(ap['ifname'], params) |
| dev.connect("test-vht20", scan_freq="5180", key_mgmt="NONE") |
| hwsim_utils.test_connectivity(dev, hapd) |
| finally: |
| dev.request("DISCONNECT") |
| if hapd: |
| hapd.request("DISABLE") |
| subprocess.call(['sudo', 'iw', 'reg', 'set', '00']) |
| dev.flush_scan_cache() |
| |
| def test_ap_vht_40(devs, apdevs): |
| """VHT and 40 MHz channel""" |
| dev = devs[0] |
| ap = apdevs[0] |
| try: |
| hapd = None |
| params = { "ssid": "test-vht40", |
| "country_code": "DE", |
| "hw_mode": "a", |
| "channel": "36", |
| "ieee80211n": "1", |
| "ieee80211ac": "1", |
| "ht_capab": "[HT40+]", |
| "vht_capab": "", |
| "vht_oper_chwidth": "0", |
| "vht_oper_centr_freq_seg0_idx": "0", |
| } |
| hapd = hostapd.add_ap(ap['ifname'], params) |
| dev.connect("test-vht40", scan_freq="5180", key_mgmt="NONE") |
| hwsim_utils.test_connectivity(dev, hapd) |
| finally: |
| dev.request("DISCONNECT") |
| if hapd: |
| hapd.request("DISABLE") |
| subprocess.call(['sudo', 'iw', 'reg', 'set', '00']) |
| dev.flush_scan_cache() |
| |
| def test_ap_vht_capab_not_supported(dev, apdev): |
| """VHT configuration with driver not supporting all vht_capab entries""" |
| try: |
| params = { "ssid": "vht", |
| "country_code": "FI", |
| "hw_mode": "a", |
| "channel": "36", |
| "ht_capab": "[HT40+][SHORT-GI-40][DSS_CCK-40]", |
| "ieee80211n": "1", |
| "ieee80211ac": "1", |
| "vht_oper_chwidth": "1", |
| "vht_capab": "[MAX-MPDU-7991][MAX-MPDU-11454][VHT160][VHT160-80PLUS80][RXLDPC][SHORT-GI-80][SHORT-GI-160][TX-STBC-2BY1][RX-STBC-1][RX-STBC-12][RX-STBC-123][RX-STBC-1234][SU-BEAMFORMER][SU-BEAMFORMEE][BF-ANTENNA-2][SOUNDING-DIMENSION-2][MU-BEAMFORMER][MU-BEAMFORMEE][VHT-TXOP-PS][HTC-VHT][MAX-A-MPDU-LEN-EXP0][MAX-A-MPDU-LEN-EXP7][VHT-LINK-ADAPT2][VHT-LINK-ADAPT3][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]", |
| "vht_oper_centr_freq_seg0_idx": "42", |
| "require_vht": "1" } |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params, wait_enabled=False) |
| ev = hapd.wait_event(["AP-DISABLED"], timeout=5) |
| if ev is None: |
| raise Exception("Startup failure not reported") |
| for i in range(1, 7): |
| if "OK" not in hapd.request("SET vht_capab [MAX-A-MPDU-LEN-EXP%d]" % i): |
| raise Exception("Unexpected SET failure") |
| finally: |
| subprocess.call(['sudo', 'iw', 'reg', 'set', '00']) |
| |
| def test_ap_vht160(dev, apdev): |
| """VHT with 160 MHz channel width""" |
| try: |
| hapd = None |
| hapd2 = None |
| params = { "ssid": "vht", |
| "country_code": "FI", |
| "hw_mode": "a", |
| "channel": "36", |
| "ht_capab": "[HT40+]", |
| "ieee80211n": "1", |
| "ieee80211ac": "1", |
| "vht_oper_chwidth": "2", |
| "vht_oper_centr_freq_seg0_idx": "50", |
| 'ieee80211d': '1', |
| 'ieee80211h': '1' } |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params, wait_enabled=False) |
| |
| ev = wait_dfs_event(hapd, "DFS-CAC-START", 5) |
| if "DFS-CAC-START" not in ev: |
| raise Exception("Unexpected DFS event") |
| |
| state = hapd.get_status_field("state") |
| if state != "DFS": |
| if state == "DISABLED" and not os.path.exists("dfs"): |
| # Not all systems have recent enough CRDA version and |
| # wireless-regdb changes to support 160 MHz and DFS. For now, |
| # do not report failures for this test case. |
| return "skip" |
| raise Exception("Unexpected interface state: " + state) |
| |
| params = { "ssid": "vht2", |
| "country_code": "FI", |
| "hw_mode": "a", |
| "channel": "100", |
| "ht_capab": "[HT40+]", |
| "ieee80211n": "1", |
| "ieee80211ac": "1", |
| "vht_oper_chwidth": "2", |
| "vht_oper_centr_freq_seg0_idx": "114", |
| 'ieee80211d': '1', |
| 'ieee80211h': '1' } |
| hapd2 = hostapd.add_ap(apdev[1]['ifname'], params, wait_enabled=False) |
| |
| ev = wait_dfs_event(hapd2, "DFS-CAC-START", 5) |
| if "DFS-CAC-START" not in ev: |
| raise Exception("Unexpected DFS event(2)") |
| |
| state = hapd2.get_status_field("state") |
| if state != "DFS": |
| raise Exception("Unexpected interface state(2): " + state) |
| |
| logger.info("Waiting for CAC to complete") |
| |
| ev = wait_dfs_event(hapd, "DFS-CAC-COMPLETED", 70) |
| if "success=1" not in ev: |
| raise Exception("CAC failed") |
| if "freq=5180" not in ev: |
| raise Exception("Unexpected DFS freq result") |
| |
| ev = hapd.wait_event(["AP-ENABLED"], timeout=5) |
| if not ev: |
| raise Exception("AP setup timed out") |
| |
| state = hapd.get_status_field("state") |
| if state != "ENABLED": |
| raise Exception("Unexpected interface state") |
| |
| ev = wait_dfs_event(hapd2, "DFS-CAC-COMPLETED", 70) |
| if "success=1" not in ev: |
| raise Exception("CAC failed(2)") |
| if "freq=5500" not in ev: |
| raise Exception("Unexpected DFS freq result(2)") |
| |
| ev = hapd2.wait_event(["AP-ENABLED"], timeout=5) |
| if not ev: |
| raise Exception("AP setup timed out(2)") |
| |
| state = hapd2.get_status_field("state") |
| if state != "ENABLED": |
| raise Exception("Unexpected interface state(2)") |
| |
| freq = hapd2.get_status_field("freq") |
| if freq != "5500": |
| raise Exception("Unexpected frequency(2)") |
| |
| dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180") |
| hwsim_utils.test_connectivity(dev[0], hapd) |
| sig = dev[0].request("SIGNAL_POLL").splitlines() |
| if "FREQUENCY=5180" not in sig: |
| raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig)) |
| if "WIDTH=160 MHz" not in sig: |
| raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig)) |
| dev[1].connect("vht2", key_mgmt="NONE", scan_freq="5500") |
| hwsim_utils.test_connectivity(dev[1], hapd2) |
| sig = dev[1].request("SIGNAL_POLL").splitlines() |
| if "FREQUENCY=5500" not in sig: |
| raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig)) |
| if "WIDTH=160 MHz" not in sig: |
| raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig)) |
| except Exception, e: |
| if isinstance(e, Exception) and str(e) == "AP startup failed": |
| if not vht_supported(): |
| logger.info("80/160 MHz channel not supported in regulatory information") |
| return "skip" |
| raise |
| finally: |
| dev[0].request("DISCONNECT") |
| dev[1].request("DISCONNECT") |
| if hapd: |
| hapd.request("DISABLE") |
| if hapd2: |
| hapd2.request("DISABLE") |
| subprocess.call(['sudo', 'iw', 'reg', 'set', '00']) |
| dev[0].flush_scan_cache() |
| dev[1].flush_scan_cache() |
| |
| def test_ap_vht80plus80(dev, apdev): |
| """VHT with 80+80 MHz channel width""" |
| try: |
| hapd = None |
| hapd2 = None |
| params = { "ssid": "vht", |
| "country_code": "US", |
| "hw_mode": "a", |
| "channel": "52", |
| "ht_capab": "[HT40+]", |
| "ieee80211n": "1", |
| "ieee80211ac": "1", |
| "vht_oper_chwidth": "3", |
| "vht_oper_centr_freq_seg0_idx": "58", |
| "vht_oper_centr_freq_seg1_idx": "155", |
| 'ieee80211d': '1', |
| 'ieee80211h': '1' } |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params, wait_enabled=False) |
| # This will actually fail since DFS on 80+80 is not yet supported |
| ev = hapd.wait_event(["AP-DISABLED"], timeout=5) |
| # ignore result to avoid breaking the test once 80+80 DFS gets enabled |
| |
| params = { "ssid": "vht2", |
| "country_code": "US", |
| "hw_mode": "a", |
| "channel": "36", |
| "ht_capab": "[HT40+]", |
| "ieee80211n": "1", |
| "ieee80211ac": "1", |
| "vht_oper_chwidth": "3", |
| "vht_oper_centr_freq_seg0_idx": "42", |
| "vht_oper_centr_freq_seg1_idx": "155" } |
| hapd2 = hostapd.add_ap(apdev[1]['ifname'], params, wait_enabled=False) |
| |
| ev = hapd2.wait_event(["AP-ENABLED"], timeout=5) |
| if not ev: |
| raise Exception("AP setup timed out(2)") |
| |
| state = hapd2.get_status_field("state") |
| if state != "ENABLED": |
| raise Exception("Unexpected interface state(2)") |
| |
| dev[1].connect("vht2", key_mgmt="NONE", scan_freq="5180") |
| hwsim_utils.test_connectivity(dev[1], hapd2) |
| sig = dev[1].request("SIGNAL_POLL").splitlines() |
| if "FREQUENCY=5180" not in sig: |
| raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig)) |
| if "WIDTH=80+80 MHz" not in sig: |
| raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig)) |
| if "CENTER_FRQ1=5210" not in sig: |
| raise Exception("Unexpected SIGNAL_POLL value(3): " + str(sig)) |
| if "CENTER_FRQ2=5775" not in sig: |
| raise Exception("Unexpected SIGNAL_POLL value(4): " + str(sig)) |
| except Exception, e: |
| if isinstance(e, Exception) and str(e) == "AP startup failed": |
| if not vht_supported(): |
| logger.info("80/160 MHz channel not supported in regulatory information") |
| return "skip" |
| raise |
| finally: |
| dev[0].request("DISCONNECT") |
| dev[1].request("DISCONNECT") |
| if hapd: |
| hapd.request("DISABLE") |
| if hapd2: |
| hapd2.request("DISABLE") |
| subprocess.call(['sudo', 'iw', 'reg', 'set', '00']) |
| dev[0].flush_scan_cache() |
| dev[1].flush_scan_cache() |
| |
| def test_ap_vht80_csa(dev, apdev): |
| """VHT with 80 MHz channel width and CSA""" |
| if not csa_supported(dev[0]): |
| return "skip" |
| try: |
| hapd = None |
| params = { "ssid": "vht", |
| "country_code": "US", |
| "hw_mode": "a", |
| "channel": "149", |
| "ht_capab": "[HT40+]", |
| "ieee80211n": "1", |
| "ieee80211ac": "1", |
| "vht_oper_chwidth": "1", |
| "vht_oper_centr_freq_seg0_idx": "155" } |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| dev[0].connect("vht", key_mgmt="NONE", scan_freq="5745") |
| hwsim_utils.test_connectivity(dev[0], hapd) |
| |
| hapd.request("CHAN_SWITCH 5 5180 ht vht blocktx center_freq1=5210 sec_channel_offset=1 bandwidth=80") |
| ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10) |
| if ev is None: |
| raise Exception("CSA finished event timed out") |
| if "freq=5180" not in ev: |
| raise Exception("Unexpected channel in CSA finished event") |
| time.sleep(0.5) |
| hwsim_utils.test_connectivity(dev[0], hapd) |
| |
| hapd.request("CHAN_SWITCH 5 5745") |
| ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10) |
| if ev is None: |
| raise Exception("CSA finished event timed out") |
| if "freq=5745" not in ev: |
| raise Exception("Unexpected channel in CSA finished event") |
| time.sleep(0.5) |
| hwsim_utils.test_connectivity(dev[0], hapd) |
| |
| # This CSA to same channel will fail in kernel, so use this only for |
| # extra code coverage. |
| hapd.request("CHAN_SWITCH 5 5745") |
| hapd.wait_event(["AP-CSA-FINISHED"], timeout=1) |
| except Exception, e: |
| if isinstance(e, Exception) and str(e) == "AP startup failed": |
| if not vht_supported(): |
| logger.info("80 MHz channel not supported in regulatory information") |
| return "skip" |
| raise |
| finally: |
| dev[0].request("DISCONNECT") |
| if hapd: |
| hapd.request("DISABLE") |
| subprocess.call(['sudo', 'iw', 'reg', 'set', '00']) |
| dev[0].flush_scan_cache() |
