gfiber / vendor / opensource / ffmpeg / a08e27a935844c13e4090bbd0fd2b626cd862a2b / . / doc / snow.txt

============================================= | |

Snow Video Codec Specification Draft 20080110 | |

============================================= | |

Introduction: | |

============= | |

This specification describes the Snow bitstream syntax and semantics as | |

well as the formal Snow decoding process. | |

The decoding process is described precisely and any compliant decoder | |

MUST produce the exact same output for a spec-conformant Snow stream. | |

For encoding, though, any process which generates a stream compliant to | |

the syntactical and semantic requirements and which is decodable by | |

the process described in this spec shall be considered a conformant | |

Snow encoder. | |

Definitions: | |

============ | |

MUST the specific part must be done to conform to this standard | |

SHOULD it is recommended to be done that way, but not strictly required | |

ilog2(x) is the rounded down logarithm of x with basis 2 | |

ilog2(0) = 0 | |

Type definitions: | |

================= | |

b 1-bit range coded | |

u unsigned scalar value range coded | |

s signed scalar value range coded | |

Bitstream syntax: | |

================= | |

frame: | |

header | |

prediction | |

residual | |

header: | |

keyframe b MID_STATE | |

if(keyframe || always_reset) | |

reset_contexts | |

if(keyframe){ | |

version u header_state | |

always_reset b header_state | |

temporal_decomposition_type u header_state | |

temporal_decomposition_count u header_state | |

spatial_decomposition_count u header_state | |

colorspace_type u header_state | |

chroma_h_shift u header_state | |

chroma_v_shift u header_state | |

spatial_scalability b header_state | |

max_ref_frames-1 u header_state | |

qlogs | |

} | |

if(!keyframe){ | |

update_mc b header_state | |

if(update_mc){ | |

for(plane=0; plane<2; plane++){ | |

diag_mc b header_state | |

htaps/2-1 u header_state | |

for(i= p->htaps/2; i; i--) | |

|hcoeff[i]| u header_state | |

} | |

} | |

update_qlogs b header_state | |

if(update_qlogs){ | |

spatial_decomposition_count u header_state | |

qlogs | |

} | |

} | |

spatial_decomposition_type s header_state | |

qlog s header_state | |

mv_scale s header_state | |

qbias s header_state | |

block_max_depth s header_state | |

qlogs: | |

for(plane=0; plane<2; plane++){ | |

quant_table[plane][0][0] s header_state | |

for(level=0; level < spatial_decomposition_count; level++){ | |

quant_table[plane][level][1]s header_state | |

quant_table[plane][level][3]s header_state | |

} | |

} | |

reset_contexts | |

*_state[*]= MID_STATE | |

prediction: | |

for(y=0; y<block_count_vertical; y++) | |

for(x=0; x<block_count_horizontal; x++) | |

block(0) | |

block(level): | |

mvx_diff=mvy_diff=y_diff=cb_diff=cr_diff=0 | |

if(keyframe){ | |

intra=1 | |

}else{ | |

if(level!=max_block_depth){ | |

s_context= 2*left->level + 2*top->level + topleft->level + topright->level | |

leaf b block_state[4 + s_context] | |

} | |

if(level==max_block_depth || leaf){ | |

intra b block_state[1 + left->intra + top->intra] | |

if(intra){ | |

y_diff s block_state[32] | |

cb_diff s block_state[64] | |

cr_diff s block_state[96] | |

}else{ | |

ref_context= ilog2(2*left->ref) + ilog2(2*top->ref) | |

if(ref_frames > 1) | |

ref u block_state[128 + 1024 + 32*ref_context] | |

mx_context= ilog2(2*abs(left->mx - top->mx)) | |

my_context= ilog2(2*abs(left->my - top->my)) | |

mvx_diff s block_state[128 + 32*(mx_context + 16*!!ref)] | |

mvy_diff s block_state[128 + 32*(my_context + 16*!!ref)] | |

} | |

}else{ | |

block(level+1) | |

block(level+1) | |

block(level+1) | |

block(level+1) | |

} | |

} | |

residual: | |

residual2(luma) | |

residual2(chroma_cr) | |

residual2(chroma_cb) | |

residual2: | |

for(level=0; level<spatial_decomposition_count; level++){ | |

if(level==0) | |

subband(LL, 0) | |

subband(HL, level) | |

subband(LH, level) | |

subband(HH, level) | |

} | |

subband: | |

FIXME | |

Tag description: | |

---------------- | |

version | |

0 | |

this MUST NOT change within a bitstream | |

always_reset | |

if 1 then the range coder contexts will be reset after each frame | |

temporal_decomposition_type | |

0 | |

temporal_decomposition_count | |

0 | |

spatial_decomposition_count | |

FIXME | |

colorspace_type | |

0 | |

this MUST NOT change within a bitstream | |

chroma_h_shift | |

log2(luma.width / chroma.width) | |

this MUST NOT change within a bitstream | |

chroma_v_shift | |

log2(luma.height / chroma.height) | |

this MUST NOT change within a bitstream | |

spatial_scalability | |

0 | |

max_ref_frames | |

maximum number of reference frames | |

this MUST NOT change within a bitstream | |

update_mc | |

indicates that motion compensation filter parameters are stored in the | |

header | |

diag_mc | |

flag to enable faster diagonal interpolation | |

this SHOULD be 1 unless it turns out to be covered by a valid patent | |

htaps | |

number of half pel interpolation filter taps, MUST be even, >0 and <10 | |

hcoeff | |

half pel interpolation filter coefficients, hcoeff[0] are the 2 middle | |

coefficients [1] are the next outer ones and so on, resulting in a filter | |

like: ...eff[2], hcoeff[1], hcoeff[0], hcoeff[0], hcoeff[1], hcoeff[2] ... | |

the sign of the coefficients is not explicitly stored but alternates | |

after each coeff and coeff[0] is positive, so ...,+,-,+,-,+,+,-,+,-,+,... | |

hcoeff[0] is not explicitly stored but found by subtracting the sum | |

of all stored coefficients with signs from 32 | |

hcoeff[0]= 32 - hcoeff[1] - hcoeff[2] - ... | |

a good choice for hcoeff and htaps is | |

htaps= 6 | |

hcoeff={40,-10,2} | |

an alternative which requires more computations at both encoder and | |

decoder side and may or may not be better is | |

htaps= 8 | |

hcoeff={42,-14,6,-2} | |

ref_frames | |

minimum of the number of available reference frames and max_ref_frames | |

for example the first frame after a key frame always has ref_frames=1 | |

spatial_decomposition_type | |

wavelet type | |

0 is a 9/7 symmetric compact integer wavelet | |

1 is a 5/3 symmetric compact integer wavelet | |

others are reserved | |

stored as delta from last, last is reset to 0 if always_reset || keyframe | |

qlog | |

quality (logarthmic quantizer scale) | |

stored as delta from last, last is reset to 0 if always_reset || keyframe | |

mv_scale | |

stored as delta from last, last is reset to 0 if always_reset || keyframe | |

FIXME check that everything works fine if this changes between frames | |

qbias | |

dequantization bias | |

stored as delta from last, last is reset to 0 if always_reset || keyframe | |

block_max_depth | |

maximum depth of the block tree | |

stored as delta from last, last is reset to 0 if always_reset || keyframe | |

quant_table | |

quantiztation table | |

Highlevel bitstream structure: | |

============================= | |

-------------------------------------------- | |

| Header | | |

-------------------------------------------- | |

| ------------------------------------ | | |

| | Block0 | | | |

| | split? | | | |

| | yes no | | | |

| | ......... intra? | | | |

| | : Block01 : yes no | | | |

| | : Block02 : ....... .......... | | | |

| | : Block03 : : y DC : : ref index: | | | |

| | : Block04 : : cb DC : : motion x : | | | |

| | ......... : cr DC : : motion y : | | | |

| | ....... .......... | | | |

| ------------------------------------ | | |

| ------------------------------------ | | |

| | Block1 | | | |

| ... | | |

-------------------------------------------- | |

| ------------ ------------ ------------ | | |

|| Y subbands | | Cb subbands| | Cr subbands|| | |

|| --- --- | | --- --- | | --- --- || | |

|| |LL0||HL0| | | |LL0||HL0| | | |LL0||HL0| || | |

|| --- --- | | --- --- | | --- --- || | |

|| --- --- | | --- --- | | --- --- || | |

|| |LH0||HH0| | | |LH0||HH0| | | |LH0||HH0| || | |

|| --- --- | | --- --- | | --- --- || | |

|| --- --- | | --- --- | | --- --- || | |

|| |HL1||LH1| | | |HL1||LH1| | | |HL1||LH1| || | |

|| --- --- | | --- --- | | --- --- || | |

|| --- --- | | --- --- | | --- --- || | |

|| |HH1||HL2| | | |HH1||HL2| | | |HH1||HL2| || | |

|| ... | | ... | | ... || | |

| ------------ ------------ ------------ | | |

-------------------------------------------- | |

Decoding process: | |

================= | |

------------ | |

| | | |

| Subbands | | |

------------ | | | |

| | ------------ | |

| Intra DC | | | |

| | LL0 subband prediction | |

------------ | | |

\ Dequantizaton | |

------------------- \ | | |

| Reference frames | \ IDWT | |

| ------- ------- | Motion \ | | |

||Frame 0| |Frame 1|| Compensation . OBMC v ------- | |

| ------- ------- | --------------. \------> + --->|Frame n|-->output | |

| ------- ------- | ------- | |

||Frame 2| |Frame 3||<----------------------------------/ | |

| ... | | |

------------------- | |

Range Coder: | |

============ | |

Binary Range Coder: | |

------------------- | |

The implemented range coder is an adapted version based upon "Range encoding: | |

an algorithm for removing redundancy from a digitised message." by G. N. N. | |

Martin. | |

The symbols encoded by the Snow range coder are bits (0|1). The | |

associated probabilities are not fix but change depending on the symbol mix | |

seen so far. | |

bit seen | new state | |

---------+----------------------------------------------- | |

0 | 256 - state_transition_table[256 - old_state]; | |

1 | state_transition_table[ old_state]; | |

state_transition_table = { | |

0, 0, 0, 0, 0, 0, 0, 0, 20, 21, 22, 23, 24, 25, 26, 27, | |

28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 37, 38, 39, 40, 41, 42, | |

43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 56, 57, | |

58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, | |

74, 75, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, | |

89, 90, 91, 92, 93, 94, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, | |

104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 114, 115, 116, 117, 118, | |

119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 133, | |

134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, | |

150, 151, 152, 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, | |

165, 166, 167, 168, 169, 170, 171, 171, 172, 173, 174, 175, 176, 177, 178, 179, | |

180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 190, 191, 192, 194, 194, | |

195, 196, 197, 198, 199, 200, 201, 202, 202, 204, 205, 206, 207, 208, 209, 209, | |

210, 211, 212, 213, 215, 215, 216, 217, 218, 219, 220, 220, 222, 223, 224, 225, | |

226, 227, 227, 229, 229, 230, 231, 232, 234, 234, 235, 236, 237, 238, 239, 240, | |

241, 242, 243, 244, 245, 246, 247, 248, 248, 0, 0, 0, 0, 0, 0, 0}; | |

FIXME | |

Range Coding of integers: | |

------------------------- | |

FIXME | |

Neighboring Blocks: | |

=================== | |

left and top are set to the respective blocks unless they are outside of | |

the image in which case they are set to the Null block | |

top-left is set to the top left block unless it is outside of the image in | |

which case it is set to the left block | |

if this block has no larger parent block or it is at the left side of its | |

parent block and the top right block is not outside of the image then the | |

top right block is used for top-right else the top-left block is used | |

Null block | |

y,cb,cr are 128 | |

level, ref, mx and my are 0 | |

Motion Vector Prediction: | |

========================= | |

1. the motion vectors of all the neighboring blocks are scaled to | |

compensate for the difference of reference frames | |

scaled_mv= (mv * (256 * (current_reference+1) / (mv.reference+1)) + 128)>>8 | |

2. the median of the scaled left, top and top-right vectors is used as | |

motion vector prediction | |

3. the used motion vector is the sum of the predictor and | |

(mvx_diff, mvy_diff)*mv_scale | |

Intra DC Predicton: | |

====================== | |

the luma and chroma values of the left block are used as predictors | |

the used luma and chroma is the sum of the predictor and y_diff, cb_diff, cr_diff | |

to reverse this in the decoder apply the following: | |

block[y][x].dc[0] = block[y][x-1].dc[0] + y_diff; | |

block[y][x].dc[1] = block[y][x-1].dc[1] + cb_diff; | |

block[y][x].dc[2] = block[y][x-1].dc[2] + cr_diff; | |

block[*][-1].dc[*]= 128; | |

Motion Compensation: | |

==================== | |

Halfpel interpolation: | |

---------------------- | |

halfpel interpolation is done by convolution with the halfpel filter stored | |

in the header: | |

horizontal halfpel samples are found by | |

H1[y][x] = hcoeff[0]*(F[y][x ] + F[y][x+1]) | |

+ hcoeff[1]*(F[y][x-1] + F[y][x+2]) | |

+ hcoeff[2]*(F[y][x-2] + F[y][x+3]) | |

+ ... | |

h1[y][x] = (H1[y][x] + 32)>>6; | |

vertical halfpel samples are found by | |

H2[y][x] = hcoeff[0]*(F[y ][x] + F[y+1][x]) | |

+ hcoeff[1]*(F[y-1][x] + F[y+2][x]) | |

+ ... | |

h2[y][x] = (H2[y][x] + 32)>>6; | |

vertical+horizontal halfpel samples are found by | |

H3[y][x] = hcoeff[0]*(H2[y][x ] + H2[y][x+1]) | |

+ hcoeff[1]*(H2[y][x-1] + H2[y][x+2]) | |

+ ... | |

H3[y][x] = hcoeff[0]*(H1[y ][x] + H1[y+1][x]) | |

+ hcoeff[1]*(H1[y+1][x] + H1[y+2][x]) | |

+ ... | |

h3[y][x] = (H3[y][x] + 2048)>>12; | |

F H1 F | |

| | | | |

| | | | |

| | | | |

F H1 F | |

| | | | |

| | | | |

| | | | |

F-------F-------F-> H1<-F-------F-------F | |

v v v | |

H2 H3 H2 | |

^ ^ ^ | |

F-------F-------F-> H1<-F-------F-------F | |

| | | | |

| | | | |

| | | | |

F H1 F | |

| | | | |

| | | | |

| | | | |

F H1 F | |

unavailable fullpel samples (outside the picture for example) shall be equal | |

to the closest available fullpel sample | |

Smaller pel interpolation: | |

-------------------------- | |

if diag_mc is set then points which lie on a line between 2 vertically, | |

horiziontally or diagonally adjacent halfpel points shall be interpolated | |

linearls with rounding to nearest and halfway values rounded up. | |

points which lie on 2 diagonals at the same time should only use the one | |

diagonal not containing the fullpel point | |

F-->O---q---O<--h1->O---q---O<--F | |

v \ / v \ / v | |

O O O O O O O | |

| / | \ | | |

q q q q q | |

| / | \ | | |

O O O O O O O | |

^ / \ ^ / \ ^ | |

h2-->O---q---O<--h3->O---q---O<--h2 | |

v \ / v \ / v | |

O O O O O O O | |

| \ | / | | |

q q q q q | |

| \ | / | | |

O O O O O O O | |

^ / \ ^ / \ ^ | |

F-->O---q---O<--h1->O---q---O<--F | |

the remaining points shall be bilinearly interpolated from the | |

up to 4 surrounding halfpel and fullpel points, again rounding should be to | |

nearest and halfway values rounded up | |

compliant Snow decoders MUST support 1-1/8 pel luma and 1/2-1/16 pel chroma | |

interpolation at least | |

Overlapped block motion compensation: | |

------------------------------------- | |

FIXME | |

LL band prediction: | |

=================== | |

Each sample in the LL0 subband is predicted by the median of the left, top and | |

left+top-topleft samples, samples outside the subband shall be considered to | |

be 0. To reverse this prediction in the decoder apply the following. | |

for(y=0; y<height; y++){ | |

for(x=0; x<width; x++){ | |

sample[y][x] += median(sample[y-1][x], | |

sample[y][x-1], | |

sample[y-1][x]+sample[y][x-1]-sample[y-1][x-1]); | |

} | |

} | |

sample[-1][*]=sample[*][-1]= 0; | |

width,height here are the width and height of the LL0 subband not of the final | |

video | |

Dequantizaton: | |

============== | |

FIXME | |

Wavelet Transform: | |

================== | |

Snow supports 2 wavelet transforms, the symmetric biorthogonal 5/3 integer | |

transform and a integer approximation of the symmetric biorthogonal 9/7 | |

daubechies wavelet. | |

2D IDWT (inverse discrete wavelet transform) | |

-------------------------------------------- | |

The 2D IDWT applies a 2D filter recursively, each time combining the | |

4 lowest frequency subbands into a single subband until only 1 subband | |

remains. | |

The 2D filter is done by first applying a 1D filter in the vertical direction | |

and then applying it in the horizontal one. | |

--------------- --------------- --------------- --------------- | |

|LL0|HL0| | | | | | | | | | | | | |

|---+---| HL1 | | L0|H0 | HL1 | | LL1 | HL1 | | | | | |

|LH0|HH0| | | | | | | | | | | | | |

|-------+-------|->|-------+-------|->|-------+-------|->| L1 | H1 |->... | |

| | | | | | | | | | | | | |

| LH1 | HH1 | | LH1 | HH1 | | LH1 | HH1 | | | | | |

| | | | | | | | | | | | | |

--------------- --------------- --------------- --------------- | |

1D Filter: | |

---------- | |

1. interleave the samples of the low and high frequency subbands like | |

s={L0, H0, L1, H1, L2, H2, L3, H3, ... } | |

note, this can end with a L or a H, the number of elements shall be w | |

s[-1] shall be considered equivalent to s[1 ] | |

s[w ] shall be considered equivalent to s[w-2] | |

2. perform the lifting steps in order as described below | |

5/3 Integer filter: | |

1. s[i] -= (s[i-1] + s[i+1] + 2)>>2; for all even i < w | |

2. s[i] += (s[i-1] + s[i+1] )>>1; for all odd i < w | |

\ | /|\ | /|\ | /|\ | /|\ | |

\|/ | \|/ | \|/ | \|/ | | |

+ | + | + | + | -1/4 | |

/|\ | /|\ | /|\ | /|\ | | |

/ | \|/ | \|/ | \|/ | \|/ | |

| + | + | + | + +1/2 | |

Snow's 9/7 Integer filter: | |

1. s[i] -= (3*(s[i-1] + s[i+1]) + 4)>>3; for all even i < w | |

2. s[i] -= s[i-1] + s[i+1] ; for all odd i < w | |

3. s[i] += ( s[i-1] + s[i+1] + 4*s[i] + 8)>>4; for all even i < w | |

4. s[i] += (3*(s[i-1] + s[i+1]) )>>1; for all odd i < w | |

\ | /|\ | /|\ | /|\ | /|\ | |

\|/ | \|/ | \|/ | \|/ | | |

+ | + | + | + | -3/8 | |

/|\ | /|\ | /|\ | /|\ | | |

/ | \|/ | \|/ | \|/ | \|/ | |

(| + (| + (| + (| + -1 | |

\ + /|\ + /|\ + /|\ + /|\ +1/4 | |

\|/ | \|/ | \|/ | \|/ | | |

+ | + | + | + | +1/16 | |

/|\ | /|\ | /|\ | /|\ | | |

/ | \|/ | \|/ | \|/ | \|/ | |

| + | + | + | + +3/2 | |

optimization tips: | |

following are exactly identical | |

(3a)>>1 == a + (a>>1) | |

(a + 4b + 8)>>4 == ((a>>2) + b + 2)>>2 | |

16bit implementation note: | |

The IDWT can be implemented with 16bits, but this requires some care to | |

prevent overflows, the following list, lists the minimum number of bits needed | |

for some terms | |

1. lifting step | |

A= s[i-1] + s[i+1] 16bit | |

3*A + 4 18bit | |

A + (A>>1) + 2 17bit | |

3. lifting step | |

s[i-1] + s[i+1] 17bit | |

4. lifiting step | |

3*(s[i-1] + s[i+1]) 17bit | |

TODO: | |

===== | |

Important: | |

finetune initial contexts | |

flip wavelet? | |

try to use the wavelet transformed predicted image (motion compensated image) as context for coding the residual coefficients | |

try the MV length as context for coding the residual coefficients | |

use extradata for stuff which is in the keyframes now? | |

the MV median predictor is patented IIRC | |

implement per picture halfpel interpolation | |

try different range coder state transition tables for different contexts | |

Not Important: | |

compare the 6 tap and 8 tap hpel filters (psnr/bitrate and subjective quality) | |

spatial_scalability b vs u (!= 0 breaks syntax anyway so we can add a u later) | |

Credits: | |

======== | |

Michael Niedermayer | |

Loren Merritt | |

Copyright: | |

========== | |

GPL + GFDL + whatever is needed to make this a RFC |