blob: 74d235a7feb3d5da9701108387929355dff0aab8 [file] [log] [blame]
BlueZ D-Bus Adapter API description
***********************************
Adapter hierarchy
=================
Service org.bluez
Interface org.bluez.Adapter1
Object path [variable prefix]/{hci0,hci1,...}
Methods void StartDiscovery()
This method starts the device discovery session. This
includes an inquiry procedure and remote device name
resolving. Use StopDiscovery to release the sessions
acquired.
This process will start creating Device objects as
new devices are discovered.
Possible errors: org.bluez.Error.NotReady
org.bluez.Error.Failed
void StopDiscovery()
This method will cancel any previous StartDiscovery
transaction.
Note that a discovery procedure is shared between all
discovery sessions thus calling StopDiscovery will only
release a single session.
Possible errors: org.bluez.Error.NotReady
org.bluez.Error.Failed
org.bluez.Error.NotAuthorized
void RemoveDevice(object device)
This removes the remote device object at the given
path. It will remove also the pairing information.
Possible errors: org.bluez.Error.InvalidArguments
org.bluez.Error.Failed
Properties string Address [readonly]
The Bluetooth device address.
string Name [readonly]
The Bluetooth system name (pretty hostname).
This property is either a static system default
or controlled by an external daemon providing
access to the pretty hostname configuration.
string Alias [readwrite]
The Bluetooth friendly name. This value can be
changed.
In case no alias is set, it will return the system
provided name. Setting an empty string as alias will
convert it back to the system provided name.
When resetting the alias with an empty string, the
property will default back to system name.
On a well configured system, this property never
needs to be changed since it defaults to the system
name and provides the pretty hostname. Only if the
local name needs to be different from the pretty
hostname, this property should be used as last
resort.
uint32 Class [readonly]
The Bluetooth class of device.
This property represents the value that is either
automatically configured by DMI/ACPI information
or provided as static configuration.
boolean Powered [readwrite]
Switch an adapter on or off. This will also set the
appropriate connectable state of the controller.
The value of this property is not persistent. After
restart or unplugging of the adapter it will reset
back to false.
boolean Discoverable [readwrite]
Switch an adapter to discoverable or non-discoverable
to either make it visible or hide it. This is a global
setting and should only be used by the settings
application.
If the DiscoverableTimeout is set to a non-zero
value then the system will set this value back to
false after the timer expired.
In case the adapter is switched off, setting this
value will fail.
When changing the Powered property the new state of
this property will be updated via a PropertyChanged
signal.
For any new adapter this settings defaults to false.
boolean Pairable [readwrite]
Switch an adapter to pairable or non-pairable. This is
a global setting and should only be used by the
settings application.
Note that this property only affects incoming pairing
requests.
For any new adapter this settings defaults to true.
uint32 PairableTimeout [readwrite]
The pairable timeout in seconds. A value of zero
means that the timeout is disabled and it will stay in
pairable mode forever.
The default value for pairable timeout should be
disabled (value 0).
uint32 DiscoverableTimeout [readwrite]
The discoverable timeout in seconds. A value of zero
means that the timeout is disabled and it will stay in
discoverable/limited mode forever.
The default value for the discoverable timeout should
be 180 seconds (3 minutes).
boolean Discovering [readonly]
Indicates that a device discovery procedure is active.
array{string} UUIDs [readonly]
List of 128-bit UUIDs that represents the available
local services.
string Modalias [readonly, optional]
Local Device ID information in modalias format
used by the kernel and udev.