| /* |
| * |
| * BlueZ - Bluetooth protocol stack for Linux |
| * |
| * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com> |
| * Copyright (C) 2002-2010 Marcel Holtmann <marcel@holtmann.org> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include <config.h> |
| #endif |
| |
| #include <stdio.h> |
| #include <errno.h> |
| #include <ctype.h> |
| #include <fcntl.h> |
| #include <unistd.h> |
| #include <stdlib.h> |
| #include <getopt.h> |
| #include <syslog.h> |
| #include <signal.h> |
| #include <sys/time.h> |
| #include <sys/ioctl.h> |
| #include <sys/socket.h> |
| |
| #include <bluetooth/bluetooth.h> |
| #include <bluetooth/hci.h> |
| #include <bluetooth/hci_lib.h> |
| #include <bluetooth/rfcomm.h> |
| #include <bluetooth/sdp.h> |
| #include <bluetooth/sdp_lib.h> |
| |
| /* Test modes */ |
| enum { |
| SEND, |
| RECV, |
| RECONNECT, |
| MULTY, |
| DUMP, |
| CONNECT, |
| CRECV, |
| LSEND, |
| AUTO, |
| }; |
| |
| static unsigned char *buf; |
| |
| /* Default data size */ |
| static long data_size = 127; |
| static long num_frames = -1; |
| |
| /* Default number of consecutive frames before the delay */ |
| static int count = 1; |
| |
| /* Default delay after sending count number of frames */ |
| static unsigned long delay = 0; |
| |
| /* Default addr and channel */ |
| static bdaddr_t bdaddr; |
| static bdaddr_t auto_bdaddr; |
| static uint16_t uuid = 0x0000; |
| static uint8_t channel = 10; |
| |
| static char *filename = NULL; |
| static char *savefile = NULL; |
| static int save_fd = -1; |
| |
| static int master = 0; |
| static int auth = 0; |
| static int encrypt = 0; |
| static int secure = 0; |
| static int socktype = SOCK_STREAM; |
| static int linger = 0; |
| static int timestamp = 0; |
| static int defer_setup = 0; |
| static int priority = -1; |
| |
| static float tv2fl(struct timeval tv) |
| { |
| return (float)tv.tv_sec + (float)(tv.tv_usec/1000000.0); |
| } |
| |
| static uint8_t get_channel(const char *svr, uint16_t uuid) |
| { |
| sdp_session_t *sdp; |
| sdp_list_t *srch, *attrs, *rsp; |
| uuid_t svclass; |
| uint16_t attr; |
| bdaddr_t dst; |
| uint8_t channel = 0; |
| int err; |
| |
| str2ba(svr, &dst); |
| |
| sdp = sdp_connect(&bdaddr, &dst, SDP_RETRY_IF_BUSY); |
| if (!sdp) |
| return 0; |
| |
| sdp_uuid16_create(&svclass, uuid); |
| srch = sdp_list_append(NULL, &svclass); |
| |
| attr = SDP_ATTR_PROTO_DESC_LIST; |
| attrs = sdp_list_append(NULL, &attr); |
| |
| err = sdp_service_search_attr_req(sdp, srch, |
| SDP_ATTR_REQ_INDIVIDUAL, attrs, &rsp); |
| if (err) |
| goto done; |
| |
| for (; rsp; rsp = rsp->next) { |
| sdp_record_t *rec = (sdp_record_t *) rsp->data; |
| sdp_list_t *protos; |
| |
| if (!sdp_get_access_protos(rec, &protos)) { |
| channel = sdp_get_proto_port(protos, RFCOMM_UUID); |
| if (channel > 0) |
| break; |
| } |
| } |
| |
| done: |
| sdp_close(sdp); |
| |
| return channel; |
| } |
| |
| static int do_connect(const char *svr) |
| { |
| struct sockaddr_rc addr; |
| struct rfcomm_conninfo conn; |
| socklen_t optlen; |
| int sk, opt; |
| |
| if (uuid != 0x0000) |
| channel = get_channel(svr, uuid); |
| |
| if (channel == 0) { |
| syslog(LOG_ERR, "Can't get channel number"); |
| return -1; |
| } |
| |
| /* Create socket */ |
| sk = socket(PF_BLUETOOTH, socktype, BTPROTO_RFCOMM); |
| if (sk < 0) { |
| syslog(LOG_ERR, "Can't create socket: %s (%d)", |
| strerror(errno), errno); |
| return -1; |
| } |
| |
| /* Bind to local address */ |
| memset(&addr, 0, sizeof(addr)); |
| addr.rc_family = AF_BLUETOOTH; |
| |
| if (bacmp(&auto_bdaddr, BDADDR_ANY)) |
| bacpy(&addr.rc_bdaddr, &auto_bdaddr); |
| else |
| bacpy(&addr.rc_bdaddr, &bdaddr); |
| |
| if (bind(sk, (struct sockaddr *) &addr, sizeof(addr)) < 0) { |
| syslog(LOG_ERR, "Can't bind socket: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| #if 0 |
| /* Enable SO_TIMESTAMP */ |
| if (timestamp) { |
| int t = 1; |
| |
| if (setsockopt(sk, SOL_SOCKET, SO_TIMESTAMP, &t, sizeof(t)) < 0) { |
| syslog(LOG_ERR, "Can't enable SO_TIMESTAMP: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| } |
| #endif |
| |
| /* Enable SO_LINGER */ |
| if (linger) { |
| struct linger l = { .l_onoff = 1, .l_linger = linger }; |
| |
| if (setsockopt(sk, SOL_SOCKET, SO_LINGER, &l, sizeof(l)) < 0) { |
| syslog(LOG_ERR, "Can't enable SO_LINGER: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| } |
| |
| /* Set link mode */ |
| opt = 0; |
| if (master) |
| opt |= RFCOMM_LM_MASTER; |
| if (auth) |
| opt |= RFCOMM_LM_AUTH; |
| if (encrypt) |
| opt |= RFCOMM_LM_ENCRYPT; |
| if (secure) |
| opt |= RFCOMM_LM_SECURE; |
| |
| if (opt && setsockopt(sk, SOL_RFCOMM, RFCOMM_LM, &opt, sizeof(opt)) < 0) { |
| syslog(LOG_ERR, "Can't set RFCOMM link mode: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| /* Connect to remote device */ |
| memset(&addr, 0, sizeof(addr)); |
| addr.rc_family = AF_BLUETOOTH; |
| str2ba(svr, &addr.rc_bdaddr); |
| addr.rc_channel = channel; |
| |
| if (connect(sk, (struct sockaddr *) &addr, sizeof(addr)) < 0) { |
| syslog(LOG_ERR, "Can't connect: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| /* Get connection information */ |
| memset(&conn, 0, sizeof(conn)); |
| optlen = sizeof(conn); |
| |
| if (getsockopt(sk, SOL_RFCOMM, RFCOMM_CONNINFO, &conn, &optlen) < 0) { |
| syslog(LOG_ERR, "Can't get RFCOMM connection information: %s (%d)", |
| strerror(errno), errno); |
| //goto error; |
| } |
| |
| if (priority > 0 && setsockopt(sk, SOL_SOCKET, SO_PRIORITY, &priority, |
| sizeof(priority)) < 0) { |
| syslog(LOG_ERR, "Can't set socket priority: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| if (getsockopt(sk, SOL_SOCKET, SO_PRIORITY, &opt, &optlen) < 0) { |
| syslog(LOG_ERR, "Can't get socket priority: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| syslog(LOG_INFO, "Connected [handle %d, class 0x%02x%02x%02x, " |
| "priority %d]", conn.hci_handle, conn.dev_class[2], |
| conn.dev_class[1], conn.dev_class[0], opt); |
| |
| return sk; |
| |
| error: |
| close(sk); |
| return -1; |
| } |
| |
| static void do_listen(void (*handler)(int sk)) |
| { |
| struct sockaddr_rc addr; |
| struct rfcomm_conninfo conn; |
| socklen_t optlen; |
| int sk, nsk, opt; |
| char ba[18]; |
| |
| /* Create socket */ |
| sk = socket(PF_BLUETOOTH, socktype, BTPROTO_RFCOMM); |
| if (sk < 0) { |
| syslog(LOG_ERR, "Can't create socket: %s (%d)", |
| strerror(errno), errno); |
| exit(1); |
| } |
| |
| /* Bind to local address */ |
| memset(&addr, 0, sizeof(addr)); |
| addr.rc_family = AF_BLUETOOTH; |
| bacpy(&addr.rc_bdaddr, &bdaddr); |
| addr.rc_channel = channel; |
| |
| if (bind(sk, (struct sockaddr *) &addr, sizeof(addr)) < 0) { |
| syslog(LOG_ERR, "Can't bind socket: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| /* Set link mode */ |
| opt = 0; |
| if (master) |
| opt |= RFCOMM_LM_MASTER; |
| if (auth) |
| opt |= RFCOMM_LM_AUTH; |
| if (encrypt) |
| opt |= RFCOMM_LM_ENCRYPT; |
| if (secure) |
| opt |= RFCOMM_LM_SECURE; |
| |
| if (opt && setsockopt(sk, SOL_RFCOMM, RFCOMM_LM, &opt, sizeof(opt)) < 0) { |
| syslog(LOG_ERR, "Can't set RFCOMM link mode: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| /* Enable deferred setup */ |
| opt = defer_setup; |
| |
| if (opt && setsockopt(sk, SOL_BLUETOOTH, BT_DEFER_SETUP, |
| &opt, sizeof(opt)) < 0) { |
| syslog(LOG_ERR, "Can't enable deferred setup : %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| /* Listen for connections */ |
| if (listen(sk, 10)) { |
| syslog(LOG_ERR,"Can not listen on the socket: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| /* Check for socket address */ |
| memset(&addr, 0, sizeof(addr)); |
| optlen = sizeof(addr); |
| |
| if (getsockname(sk, (struct sockaddr *) &addr, &optlen) < 0) { |
| syslog(LOG_ERR, "Can't get socket name: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| channel = addr.rc_channel; |
| |
| syslog(LOG_INFO, "Waiting for connection on channel %d ...", channel); |
| |
| while (1) { |
| memset(&addr, 0, sizeof(addr)); |
| optlen = sizeof(addr); |
| |
| nsk = accept(sk, (struct sockaddr *) &addr, &optlen); |
| if (nsk < 0) { |
| syslog(LOG_ERR,"Accept failed: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| if (fork()) { |
| /* Parent */ |
| close(nsk); |
| continue; |
| } |
| /* Child */ |
| close(sk); |
| |
| /* Get connection information */ |
| memset(&conn, 0, sizeof(conn)); |
| optlen = sizeof(conn); |
| |
| if (getsockopt(nsk, SOL_RFCOMM, RFCOMM_CONNINFO, &conn, &optlen) < 0) { |
| syslog(LOG_ERR, "Can't get RFCOMM connection information: %s (%d)", |
| strerror(errno), errno); |
| //close(nsk); |
| //goto error; |
| } |
| |
| if (priority > 0 && setsockopt(sk, SOL_SOCKET, SO_PRIORITY, |
| &priority, sizeof(priority)) < 0) { |
| syslog(LOG_ERR, "Can't set socket priority: %s (%d)", |
| strerror(errno), errno); |
| close(nsk); |
| goto error; |
| } |
| |
| optlen = sizeof(priority); |
| if (getsockopt(nsk, SOL_SOCKET, SO_PRIORITY, &opt, &optlen) < 0) { |
| syslog(LOG_ERR, "Can't get socket priority: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| ba2str(&addr.rc_bdaddr, ba); |
| syslog(LOG_INFO, "Connect from %s [handle %d, " |
| "class 0x%02x%02x%02x, priority %d]", |
| ba, conn.hci_handle, conn.dev_class[2], |
| conn.dev_class[1], conn.dev_class[0], opt); |
| |
| #if 0 |
| /* Enable SO_TIMESTAMP */ |
| if (timestamp) { |
| int t = 1; |
| |
| if (setsockopt(nsk, SOL_SOCKET, SO_TIMESTAMP, &t, sizeof(t)) < 0) { |
| syslog(LOG_ERR, "Can't enable SO_TIMESTAMP: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| } |
| #endif |
| |
| /* Enable SO_LINGER */ |
| if (linger) { |
| struct linger l = { .l_onoff = 1, .l_linger = linger }; |
| |
| if (setsockopt(nsk, SOL_SOCKET, SO_LINGER, &l, sizeof(l)) < 0) { |
| syslog(LOG_ERR, "Can't enable SO_LINGER: %s (%d)", |
| strerror(errno), errno); |
| close(nsk); |
| goto error; |
| } |
| } |
| |
| /* Handle deferred setup */ |
| if (defer_setup) { |
| syslog(LOG_INFO, "Waiting for %d seconds", |
| abs(defer_setup) - 1); |
| sleep(abs(defer_setup) - 1); |
| |
| if (defer_setup < 0) { |
| close(nsk); |
| goto error; |
| } |
| } |
| |
| handler(nsk); |
| |
| syslog(LOG_INFO, "Disconnect: %m"); |
| exit(0); |
| } |
| |
| return; |
| |
| error: |
| close(sk); |
| exit(1); |
| } |
| |
| static void dump_mode(int sk) |
| { |
| int len; |
| |
| syslog(LOG_INFO, "Receiving ..."); |
| while ((len = read(sk, buf, data_size)) > 0) |
| syslog(LOG_INFO, "Received %d bytes", len); |
| } |
| |
| static void save_mode(int sk) |
| { |
| int len, ret; |
| char *b; |
| |
| b = malloc(data_size); |
| if (!b) { |
| syslog(LOG_ERR, "Failed to open file to save recv data"); |
| return; |
| } |
| |
| syslog(LOG_INFO, "Receiving ..."); |
| while ((len = read(sk, b, data_size)) > 0) { |
| ret = write(save_fd, b, len); |
| if (ret < 0) |
| return; |
| } |
| } |
| |
| static void recv_mode(int sk) |
| { |
| struct timeval tv_beg, tv_end, tv_diff; |
| char ts[30]; |
| long total; |
| |
| syslog(LOG_INFO, "Receiving ..."); |
| |
| memset(ts, 0, sizeof(ts)); |
| |
| while (1) { |
| gettimeofday(&tv_beg,NULL); |
| total = 0; |
| while (total < data_size) { |
| //uint32_t sq; |
| //uint16_t l; |
| int r; |
| |
| if ((r = recv(sk, buf, data_size, 0)) < 0) { |
| if (r < 0) |
| syslog(LOG_ERR, "Read failed: %s (%d)", |
| strerror(errno), errno); |
| return; |
| } |
| |
| if (timestamp) { |
| struct timeval tv; |
| |
| if (ioctl(sk, SIOCGSTAMP, &tv) < 0) { |
| timestamp = 0; |
| memset(ts, 0, sizeof(ts)); |
| } else { |
| sprintf(ts, "[%ld.%ld] ", |
| tv.tv_sec, tv.tv_usec); |
| } |
| } |
| |
| #if 0 |
| /* Check sequence */ |
| sq = btohl(*(uint32_t *) buf); |
| if (seq != sq) { |
| syslog(LOG_INFO, "seq missmatch: %d -> %d", seq, sq); |
| seq = sq; |
| } |
| seq++; |
| |
| /* Check length */ |
| l = btohs(*(uint16_t *) (buf + 4)); |
| if (r != l) { |
| syslog(LOG_INFO, "size missmatch: %d -> %d", r, l); |
| continue; |
| } |
| |
| /* Verify data */ |
| for (i = 6; i < r; i++) { |
| if (buf[i] != 0x7f) |
| syslog(LOG_INFO, "data missmatch: byte %d 0x%2.2x", i, buf[i]); |
| } |
| #endif |
| total += r; |
| } |
| gettimeofday(&tv_end,NULL); |
| |
| timersub(&tv_end,&tv_beg,&tv_diff); |
| |
| syslog(LOG_INFO,"%s%ld bytes in %.2f sec, %.2f kB/s", ts, total, |
| tv2fl(tv_diff), (float)(total / tv2fl(tv_diff) ) / 1024.0); |
| } |
| } |
| |
| static void do_send(int sk) |
| { |
| uint32_t seq; |
| int i, fd, len; |
| |
| syslog(LOG_INFO,"Sending ..."); |
| |
| if (filename) { |
| fd = open(filename, O_RDONLY); |
| if (fd < 0) { |
| syslog(LOG_ERR, "Open failed: %s (%d)", |
| strerror(errno), errno); |
| exit(1); |
| } |
| len = read(fd, buf, data_size); |
| send(sk, buf, len, 0); |
| return; |
| } else { |
| for (i = 6; i < data_size; i++) |
| buf[i] = 0x7f; |
| } |
| |
| seq = 0; |
| while ((num_frames == -1) || (num_frames-- > 0)) { |
| bt_put_le32(seq, buf); |
| bt_put_le16(data_size, buf + 4); |
| |
| seq++; |
| |
| if (send(sk, buf, data_size, 0) <= 0) { |
| syslog(LOG_ERR, "Send failed: %s (%d)", |
| strerror(errno), errno); |
| exit(1); |
| } |
| |
| if (num_frames && delay && count && !(seq % count)) |
| usleep(delay); |
| } |
| } |
| |
| static void send_mode(int sk) |
| { |
| do_send(sk); |
| |
| syslog(LOG_INFO, "Closing channel ..."); |
| if (shutdown(sk, SHUT_RDWR) < 0) |
| syslog(LOG_INFO, "Close failed: %m"); |
| else |
| syslog(LOG_INFO, "Done"); |
| } |
| |
| static void reconnect_mode(char *svr) |
| { |
| while(1) { |
| int sk = do_connect(svr); |
| close(sk); |
| } |
| } |
| |
| static void multi_connect_mode(int argc, char *argv[]) |
| { |
| int i, n, sk; |
| |
| while (1) { |
| for (n = 0; n < argc; n++) { |
| for (i = 0; i < count; i++) { |
| if (fork()) |
| continue; |
| |
| /* Child */ |
| sk = do_connect(argv[n]); |
| usleep(500); |
| close(sk); |
| exit(0); |
| } |
| } |
| sleep(4); |
| } |
| } |
| |
| static void automated_send_recv() |
| { |
| int sk; |
| char device[18]; |
| |
| if (fork()) { |
| if (!savefile) { |
| do_listen(recv_mode); |
| return; |
| } |
| |
| save_fd = open(savefile, O_CREAT | O_WRONLY, |
| S_IRUSR | S_IWUSR); |
| if (save_fd < 0) |
| syslog(LOG_ERR, "Failed to open file to save data"); |
| |
| do_listen(save_mode); |
| |
| close(save_fd); |
| } else { |
| ba2str(&bdaddr, device); |
| |
| sk = do_connect(device); |
| if (sk < 0) |
| exit(1); |
| send_mode(sk); |
| } |
| } |
| |
| static void sig_child_exit(int code) |
| { |
| if (save_fd >= 0) |
| close(save_fd); |
| |
| syslog(LOG_INFO, "Exit"); |
| exit(0); |
| } |
| |
| static void usage(void) |
| { |
| printf("rctest - RFCOMM testing\n" |
| "Usage:\n"); |
| printf("\trctest <mode> [options] [bdaddr]\n"); |
| printf("Modes:\n" |
| "\t-r listen and receive\n" |
| "\t-w listen and send\n" |
| "\t-d listen and dump incoming data\n" |
| "\t-s connect and send\n" |
| "\t-u connect and receive\n" |
| "\t-n connect and be silent\n" |
| "\t-c connect, disconnect, connect, ...\n" |
| "\t-m multiple connects\n" |
| "\t-a automated test (receive hcix as parameter)\n"); |
| |
| printf("Options:\n" |
| "\t[-b bytes] [-i device] [-P channel] [-U uuid]\n" |
| "\t[-L seconds] enabled SO_LINGER option\n" |
| "\t[-W seconds] enable deferred setup\n" |
| "\t[-B filename] use data packets from file\n" |
| "\t[-O filename] save received data to file\n" |
| "\t[-N num] number of frames to send\n" |
| "\t[-C num] send num frames before delay (default = 1)\n" |
| "\t[-D milliseconds] delay after sending num frames (default = 0)\n" |
| "\t[-Y priority] socket priority\n" |
| "\t[-A] request authentication\n" |
| "\t[-E] request encryption\n" |
| "\t[-S] secure connection\n" |
| "\t[-M] become master\n" |
| "\t[-T] enable timestamps\n"); |
| } |
| |
| int main(int argc, char *argv[]) |
| { |
| struct sigaction sa; |
| int opt, sk, mode = RECV, need_addr = 0; |
| |
| bacpy(&bdaddr, BDADDR_ANY); |
| bacpy(&auto_bdaddr, BDADDR_ANY); |
| |
| while ((opt=getopt(argc,argv,"rdscuwmna:b:i:P:U:B:O:N:MAESL:W:C:D:Y:T")) != EOF) { |
| switch (opt) { |
| case 'r': |
| mode = RECV; |
| break; |
| |
| case 's': |
| mode = SEND; |
| need_addr = 1; |
| break; |
| |
| case 'w': |
| mode = LSEND; |
| break; |
| |
| case 'u': |
| mode = CRECV; |
| need_addr = 1; |
| break; |
| |
| case 'd': |
| mode = DUMP; |
| break; |
| |
| case 'c': |
| mode = RECONNECT; |
| need_addr = 1; |
| break; |
| |
| case 'n': |
| mode = CONNECT; |
| need_addr = 1; |
| break; |
| |
| case 'm': |
| mode = MULTY; |
| need_addr = 1; |
| break; |
| |
| case 'a': |
| mode = AUTO; |
| |
| if (!strncasecmp(optarg, "hci", 3)) |
| hci_devba(atoi(optarg + 3), &auto_bdaddr); |
| else |
| str2ba(optarg, &auto_bdaddr); |
| break; |
| |
| case 'b': |
| data_size = atoi(optarg); |
| break; |
| |
| case 'i': |
| if (!strncasecmp(optarg, "hci", 3)) |
| hci_devba(atoi(optarg + 3), &bdaddr); |
| else |
| str2ba(optarg, &bdaddr); |
| break; |
| |
| case 'P': |
| channel = atoi(optarg); |
| break; |
| |
| case 'U': |
| if (!strcasecmp(optarg, "spp")) |
| uuid = SERIAL_PORT_SVCLASS_ID; |
| else if (!strncasecmp(optarg, "0x", 2)) |
| uuid = strtoul(optarg + 2, NULL, 16); |
| else |
| uuid = atoi(optarg); |
| break; |
| |
| case 'M': |
| master = 1; |
| break; |
| |
| case 'A': |
| auth = 1; |
| break; |
| |
| case 'E': |
| encrypt = 1; |
| break; |
| |
| case 'S': |
| secure = 1; |
| break; |
| |
| case 'L': |
| linger = atoi(optarg); |
| break; |
| |
| case 'W': |
| defer_setup = atoi(optarg); |
| break; |
| |
| case 'B': |
| filename = strdup(optarg); |
| break; |
| |
| case 'O': |
| savefile = strdup(optarg); |
| break; |
| |
| case 'N': |
| num_frames = atoi(optarg); |
| break; |
| |
| case 'C': |
| count = atoi(optarg); |
| break; |
| |
| case 'D': |
| delay = atoi(optarg) * 1000; |
| break; |
| |
| case 'Y': |
| priority = atoi(optarg); |
| break; |
| |
| case 'T': |
| timestamp = 1; |
| break; |
| |
| default: |
| usage(); |
| exit(1); |
| } |
| } |
| |
| if (need_addr && !(argc - optind)) { |
| usage(); |
| exit(1); |
| } |
| |
| if (!(buf = malloc(data_size))) { |
| perror("Can't allocate data buffer"); |
| exit(1); |
| } |
| |
| memset(&sa, 0, sizeof(sa)); |
| if (mode == AUTO) |
| sa.sa_handler = sig_child_exit; |
| else |
| sa.sa_handler = SIG_IGN; |
| sa.sa_flags = SA_NOCLDSTOP; |
| sigaction(SIGCHLD, &sa, NULL); |
| |
| openlog("rctest", LOG_PERROR | LOG_PID, LOG_LOCAL0); |
| |
| switch (mode) { |
| case RECV: |
| do_listen(recv_mode); |
| break; |
| |
| case CRECV: |
| sk = do_connect(argv[optind]); |
| if (sk < 0) |
| exit(1); |
| recv_mode(sk); |
| break; |
| |
| case DUMP: |
| do_listen(dump_mode); |
| break; |
| |
| case SEND: |
| sk = do_connect(argv[optind]); |
| if (sk < 0) |
| exit(1); |
| send_mode(sk); |
| break; |
| |
| case LSEND: |
| do_listen(send_mode); |
| break; |
| |
| case RECONNECT: |
| reconnect_mode(argv[optind]); |
| break; |
| |
| case MULTY: |
| multi_connect_mode(argc - optind, argv + optind); |
| break; |
| |
| case CONNECT: |
| sk = do_connect(argv[optind]); |
| if (sk < 0) |
| exit(1); |
| dump_mode(sk); |
| break; |
| |
| case AUTO: |
| automated_send_recv(); |
| break; |
| } |
| |
| syslog(LOG_INFO, "Exit"); |
| |
| closelog(); |
| |
| return 0; |
| } |