| .TH BCCMD 1 "Jun 20 2006" BlueZ "Linux System Administration" |
| .SH NAME |
| bccmd \- Utility for the CSR BCCMD interface |
| .SH SYNOPSIS |
| .B bccmd |
| .br |
| .B bccmd [-t <transport>] [-d <device>] <command> [<args>] |
| .br |
| .B bccmd [-h --help] |
| .br |
| .SH DESCRIPTION |
| .B |
| bccmd |
| issues BlueCore commands to |
| .B |
| Cambridge Silicon Radio |
| devices. If run without the <command> argument, a short help page will be displayed. |
| .SH OPTIONS |
| .TP |
| .BI -t\ <transport> |
| Specify the communication transport. Valid options are: |
| .RS |
| .TP |
| .BI HCI |
| Local device with Host Controller Interface (default). |
| .TP |
| .BI USB |
| Direct USB connection. |
| .TP |
| .BI BCSP |
| Blue Core Serial Protocol. |
| .TP |
| .BI H4 |
| H4 serial protocol. |
| .TP |
| .BI 3WIRE |
| 3WIRE protocol (not implemented). |
| .SH |
| .TP |
| .BI -d\ <dev> |
| Specify a particular device to operate on. If not specified, default is the first available HCI device |
| or /dev/ttyS0 for serial transports. |
| .SH COMMANDS |
| .TP |
| .BI builddef |
| Get build definitions |
| .TP |
| .BI keylen\ <handle> |
| Get current crypt key length |
| .TP |
| .BI clock |
| Get local Bluetooth clock |
| .TP |
| .BI rand |
| Get random number |
| .TP |
| .BI chiprev |
| Get chip revision |
| .TP |
| .BI buildname |
| Get the full build name |
| .TP |
| .BI panicarg |
| Get panic code argument |
| .TP |
| .BI faultarg |
| Get fault code argument |
| .TP |
| .BI coldreset |
| Perform cold reset |
| .TP |
| .BI warmreset |
| Perform warm reset |
| .TP |
| .BI disabletx |
| Disable TX on the device |
| .TP |
| .BI enabletx |
| Enable TX on the device |
| .TP |
| .BI singlechan\ <channel> |
| Lock radio on specific channel |
| .TP |
| .BI hoppingon |
| Revert to channel hopping |
| .TP |
| .BI rttxdata1\ <decimal\ freq\ MHz>\ <level> |
| TXData1 radio test |
| .TP |
| .BI radiotest\ <decimal\ freq\ MHz>\ <level>\ <id> |
| Run radio tests, tests 4, 6 and 7 are transmit tests |
| .TP |
| .BI memtypes |
| Get memory types |
| .TP |
| .BI psget\ [-r]\ [-s\ <stores>]\ <key> |
| Get value for PS key. |
| -r sends a warm reset afterwards |
| .TP |
| .BI psset\ [-r]\ [-s\ <stores>]\ <key>\ <value> |
| Set value for PS key. |
| -r sends a warm reset afterwards |
| .TP |
| .BI psclr\ [-r]\ [-s\ <stores>]\ <key> |
| Clear value for PS key. |
| -r sends a warm reset afterwards |
| .TP |
| .BI pslist\ [-r]\ [-s\ <stores>] |
| List all PS keys. |
| -r sends a warm reset afterwards |
| .TP |
| .BI psread\ [-r]\ [-s\ <stores>] |
| Read all PS keys. |
| -r sends a warm reset afterwards |
| .TP |
| .BI psload\ [-r]\ [-s\ <stores>]\ <file> |
| Load all PS keys from PSR file. |
| -r sends a warm reset afterwards |
| .TP |
| .BI pscheck\ [-r]\ [-s\ <stores>]\ <file> |
| Check syntax of PSR file. |
| -r sends a warm reset afterwards |
| .SH KEYS |
| bdaddr country devclass keymin keymax features commands version |
| remver hciextn mapsco baudrate hostintf anafreq anaftrim usbvid |
| usbpid dfupid bootmode |
| .SH AUTHORS |
| Written by Marcel Holtmann <marcel@holtmann.org>, |
| man page by Adam Laurie <adam@algroup.co.uk> |
| .PP |
