| /* |
| Driver for Silicon Labs Si2161 DVB-T and Si2165 DVB-C/-T Demodulator |
| |
| Copyright (C) 2013-2014 Matthias Schwarzott <zzam@gentoo.org> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| References: |
| http://www.silabs.com/Support%20Documents/TechnicalDocs/Si2165-short.pdf |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/firmware.h> |
| |
| #include "dvb_frontend.h" |
| #include "dvb_math.h" |
| #include "si2165_priv.h" |
| #include "si2165.h" |
| |
| /* Hauppauge WinTV-HVR-930C-HD B130 / PCTV QuatroStick 521e 1113xx |
| * uses 16 MHz xtal */ |
| |
| /* Hauppauge WinTV-HVR-930C-HD B131 / PCTV QuatroStick 522e 1114xx |
| * uses 24 MHz clock provided by tuner */ |
| |
| struct si2165_state { |
| struct i2c_adapter *i2c; |
| |
| struct dvb_frontend frontend; |
| |
| struct si2165_config config; |
| |
| u8 chip_revcode; |
| u8 chip_type; |
| |
| /* calculated by xtal and div settings */ |
| u32 fvco_hz; |
| u32 sys_clk; |
| u32 adc_clk; |
| |
| bool has_dvbc; |
| bool has_dvbt; |
| bool firmware_loaded; |
| }; |
| |
| #define DEBUG_OTHER 0x01 |
| #define DEBUG_I2C_WRITE 0x02 |
| #define DEBUG_I2C_READ 0x04 |
| #define DEBUG_REG_READ 0x08 |
| #define DEBUG_REG_WRITE 0x10 |
| #define DEBUG_FW_LOAD 0x20 |
| |
| static int debug = 0x00; |
| |
| #define dprintk(args...) \ |
| do { \ |
| if (debug & DEBUG_OTHER) \ |
| printk(KERN_DEBUG "si2165: " args); \ |
| } while (0) |
| |
| #define deb_i2c_write(args...) \ |
| do { \ |
| if (debug & DEBUG_I2C_WRITE) \ |
| printk(KERN_DEBUG "si2165: i2c write: " args); \ |
| } while (0) |
| |
| #define deb_i2c_read(args...) \ |
| do { \ |
| if (debug & DEBUG_I2C_READ) \ |
| printk(KERN_DEBUG "si2165: i2c read: " args); \ |
| } while (0) |
| |
| #define deb_readreg(args...) \ |
| do { \ |
| if (debug & DEBUG_REG_READ) \ |
| printk(KERN_DEBUG "si2165: reg read: " args); \ |
| } while (0) |
| |
| #define deb_writereg(args...) \ |
| do { \ |
| if (debug & DEBUG_REG_WRITE) \ |
| printk(KERN_DEBUG "si2165: reg write: " args); \ |
| } while (0) |
| |
| #define deb_fw_load(args...) \ |
| do { \ |
| if (debug & DEBUG_FW_LOAD) \ |
| printk(KERN_DEBUG "si2165: fw load: " args); \ |
| } while (0) |
| |
| static int si2165_write(struct si2165_state *state, const u16 reg, |
| const u8 *src, const int count) |
| { |
| int ret; |
| struct i2c_msg msg; |
| u8 buf[2 + 4]; /* write a maximum of 4 bytes of data */ |
| |
| if (count + 2 > sizeof(buf)) { |
| dev_warn(&state->i2c->dev, |
| "%s: i2c wr reg=%04x: count=%d is too big!\n", |
| KBUILD_MODNAME, reg, count); |
| return -EINVAL; |
| } |
| buf[0] = reg >> 8; |
| buf[1] = reg & 0xff; |
| memcpy(buf + 2, src, count); |
| |
| msg.addr = state->config.i2c_addr; |
| msg.flags = 0; |
| msg.buf = buf; |
| msg.len = count + 2; |
| |
| if (debug & DEBUG_I2C_WRITE) |
| deb_i2c_write("reg: 0x%04x, data: %*ph\n", reg, count, src); |
| |
| ret = i2c_transfer(state->i2c, &msg, 1); |
| |
| if (ret != 1) { |
| dev_err(&state->i2c->dev, "%s: ret == %d\n", __func__, ret); |
| if (ret < 0) |
| return ret; |
| else |
| return -EREMOTEIO; |
| } |
| |
| return 0; |
| } |
| |
| static int si2165_read(struct si2165_state *state, |
| const u16 reg, u8 *val, const int count) |
| { |
| int ret; |
| u8 reg_buf[] = { reg >> 8, reg & 0xff }; |
| struct i2c_msg msg[] = { |
| { .addr = state->config.i2c_addr, |
| .flags = 0, .buf = reg_buf, .len = 2 }, |
| { .addr = state->config.i2c_addr, |
| .flags = I2C_M_RD, .buf = val, .len = count }, |
| }; |
| |
| ret = i2c_transfer(state->i2c, msg, 2); |
| |
| if (ret != 2) { |
| dev_err(&state->i2c->dev, "%s: error (addr %02x reg %04x error (ret == %i)\n", |
| __func__, state->config.i2c_addr, reg, ret); |
| if (ret < 0) |
| return ret; |
| else |
| return -EREMOTEIO; |
| } |
| |
| if (debug & DEBUG_I2C_READ) |
| deb_i2c_read("reg: 0x%04x, data: %*ph\n", reg, count, val); |
| |
| return 0; |
| } |
| |
| static int si2165_readreg8(struct si2165_state *state, |
| const u16 reg, u8 *val) |
| { |
| int ret; |
| |
| ret = si2165_read(state, reg, val, 1); |
| deb_readreg("R(0x%04x)=0x%02x\n", reg, *val); |
| return ret; |
| } |
| |
| static int si2165_readreg16(struct si2165_state *state, |
| const u16 reg, u16 *val) |
| { |
| u8 buf[2]; |
| |
| int ret = si2165_read(state, reg, buf, 2); |
| *val = buf[0] | buf[1] << 8; |
| deb_readreg("R(0x%04x)=0x%04x\n", reg, *val); |
| return ret; |
| } |
| |
| static int si2165_writereg8(struct si2165_state *state, const u16 reg, u8 val) |
| { |
| return si2165_write(state, reg, &val, 1); |
| } |
| |
| static int si2165_writereg16(struct si2165_state *state, const u16 reg, u16 val) |
| { |
| u8 buf[2] = { val & 0xff, (val >> 8) & 0xff }; |
| |
| return si2165_write(state, reg, buf, 2); |
| } |
| |
| static int si2165_writereg24(struct si2165_state *state, const u16 reg, u32 val) |
| { |
| u8 buf[3] = { val & 0xff, (val >> 8) & 0xff, (val >> 16) & 0xff }; |
| |
| return si2165_write(state, reg, buf, 3); |
| } |
| |
| static int si2165_writereg32(struct si2165_state *state, const u16 reg, u32 val) |
| { |
| u8 buf[4] = { |
| val & 0xff, |
| (val >> 8) & 0xff, |
| (val >> 16) & 0xff, |
| (val >> 24) & 0xff |
| }; |
| return si2165_write(state, reg, buf, 4); |
| } |
| |
| static int si2165_writereg_mask8(struct si2165_state *state, const u16 reg, |
| u8 val, u8 mask) |
| { |
| int ret; |
| u8 tmp; |
| |
| if (mask != 0xff) { |
| ret = si2165_readreg8(state, reg, &tmp); |
| if (ret < 0) |
| goto err; |
| |
| val &= mask; |
| tmp &= ~mask; |
| val |= tmp; |
| } |
| |
| ret = si2165_writereg8(state, reg, val); |
| err: |
| return ret; |
| } |
| |
| static int si2165_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *s) |
| { |
| s->min_delay_ms = 1000; |
| return 0; |
| } |
| |
| static int si2165_init_pll(struct si2165_state *state) |
| { |
| u32 ref_freq_Hz = state->config.ref_freq_Hz; |
| u8 divr = 1; /* 1..7 */ |
| u8 divp = 1; /* only 1 or 4 */ |
| u8 divn = 56; /* 1..63 */ |
| u8 divm = 8; |
| u8 divl = 12; |
| u8 buf[4]; |
| |
| /* hardcoded values can be deleted if calculation is verified |
| * or it yields the same values as the windows driver */ |
| switch (ref_freq_Hz) { |
| case 16000000u: |
| divn = 56; |
| break; |
| case 24000000u: |
| divr = 2; |
| divp = 4; |
| divn = 19; |
| break; |
| default: |
| /* ref_freq / divr must be between 4 and 16 MHz */ |
| if (ref_freq_Hz > 16000000u) |
| divr = 2; |
| |
| /* now select divn and divp such that |
| * fvco is in 1624..1824 MHz */ |
| if (1624000000u * divr > ref_freq_Hz * 2u * 63u) |
| divp = 4; |
| |
| /* is this already correct regarding rounding? */ |
| divn = 1624000000u * divr / (ref_freq_Hz * 2u * divp); |
| break; |
| } |
| |
| /* adc_clk and sys_clk depend on xtal and pll settings */ |
| state->fvco_hz = ref_freq_Hz / divr |
| * 2u * divn * divp; |
| state->adc_clk = state->fvco_hz / (divm * 4u); |
| state->sys_clk = state->fvco_hz / (divl * 2u); |
| |
| /* write pll registers 0x00a0..0x00a3 at once */ |
| buf[0] = divl; |
| buf[1] = divm; |
| buf[2] = (divn & 0x3f) | ((divp == 1) ? 0x40 : 0x00) | 0x80; |
| buf[3] = divr; |
| return si2165_write(state, 0x00a0, buf, 4); |
| } |
| |
| static int si2165_adjust_pll_divl(struct si2165_state *state, u8 divl) |
| { |
| state->sys_clk = state->fvco_hz / (divl * 2u); |
| return si2165_writereg8(state, 0x00a0, divl); /* pll_divl */ |
| } |
| |
| static u32 si2165_get_fe_clk(struct si2165_state *state) |
| { |
| /* assume Oversampling mode Ovr4 is used */ |
| return state->adc_clk; |
| } |
| |
| static int si2165_wait_init_done(struct si2165_state *state) |
| { |
| int ret = -EINVAL; |
| u8 val = 0; |
| int i; |
| |
| for (i = 0; i < 3; ++i) { |
| si2165_readreg8(state, 0x0054, &val); |
| if (val == 0x01) |
| return 0; |
| usleep_range(1000, 50000); |
| } |
| dev_err(&state->i2c->dev, "%s: init_done was not set\n", |
| KBUILD_MODNAME); |
| return ret; |
| } |
| |
| static int si2165_upload_firmware_block(struct si2165_state *state, |
| const u8 *data, u32 len, u32 *poffset, u32 block_count) |
| { |
| int ret; |
| u8 buf_ctrl[4] = { 0x00, 0x00, 0x00, 0xc0 }; |
| u8 wordcount; |
| u32 cur_block = 0; |
| u32 offset = poffset ? *poffset : 0; |
| |
| if (len < 4) |
| return -EINVAL; |
| if (len % 4 != 0) |
| return -EINVAL; |
| |
| deb_fw_load("si2165_upload_firmware_block called with len=0x%x offset=0x%x blockcount=0x%x\n", |
| len, offset, block_count); |
| while (offset+12 <= len && cur_block < block_count) { |
| deb_fw_load("si2165_upload_firmware_block in while len=0x%x offset=0x%x cur_block=0x%x blockcount=0x%x\n", |
| len, offset, cur_block, block_count); |
| wordcount = data[offset]; |
| if (wordcount < 1 || data[offset+1] || |
| data[offset+2] || data[offset+3]) { |
| dev_warn(&state->i2c->dev, |
| "%s: bad fw data[0..3] = %*ph\n", |
| KBUILD_MODNAME, 4, data); |
| return -EINVAL; |
| } |
| |
| if (offset + 8 + wordcount * 4 > len) { |
| dev_warn(&state->i2c->dev, |
| "%s: len is too small for block len=%d, wordcount=%d\n", |
| KBUILD_MODNAME, len, wordcount); |
| return -EINVAL; |
| } |
| |
| buf_ctrl[0] = wordcount - 1; |
| |
| ret = si2165_write(state, 0x0364, buf_ctrl, 4); |
| if (ret < 0) |
| goto error; |
| ret = si2165_write(state, 0x0368, data+offset+4, 4); |
| if (ret < 0) |
| goto error; |
| |
| offset += 8; |
| |
| while (wordcount > 0) { |
| ret = si2165_write(state, 0x36c, data+offset, 4); |
| if (ret < 0) |
| goto error; |
| wordcount--; |
| offset += 4; |
| } |
| cur_block++; |
| } |
| |
| deb_fw_load("si2165_upload_firmware_block after while len=0x%x offset=0x%x cur_block=0x%x blockcount=0x%x\n", |
| len, offset, cur_block, block_count); |
| |
| if (poffset) |
| *poffset = offset; |
| |
| deb_fw_load("si2165_upload_firmware_block returned offset=0x%x\n", |
| offset); |
| |
| return 0; |
| error: |
| return ret; |
| } |
| |
| static int si2165_upload_firmware(struct si2165_state *state) |
| { |
| /* int ret; */ |
| u8 val[3]; |
| u16 val16; |
| int ret; |
| |
| const struct firmware *fw = NULL; |
| u8 *fw_file; |
| const u8 *data; |
| u32 len; |
| u32 offset; |
| u8 patch_version; |
| u8 block_count; |
| u16 crc_expected; |
| |
| switch (state->chip_revcode) { |
| case 0x03: /* revision D */ |
| fw_file = SI2165_FIRMWARE_REV_D; |
| break; |
| default: |
| dev_info(&state->i2c->dev, "%s: no firmware file for revision=%d\n", |
| KBUILD_MODNAME, state->chip_revcode); |
| return 0; |
| } |
| |
| /* request the firmware, this will block and timeout */ |
| ret = request_firmware(&fw, fw_file, state->i2c->dev.parent); |
| if (ret) { |
| dev_warn(&state->i2c->dev, "%s: firmware file '%s' not found\n", |
| KBUILD_MODNAME, fw_file); |
| goto error; |
| } |
| |
| data = fw->data; |
| len = fw->size; |
| |
| dev_info(&state->i2c->dev, "%s: downloading firmware from file '%s' size=%d\n", |
| KBUILD_MODNAME, fw_file, len); |
| |
| if (len % 4 != 0) { |
| dev_warn(&state->i2c->dev, "%s: firmware size is not multiple of 4\n", |
| KBUILD_MODNAME); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| /* check header (8 bytes) */ |
| if (len < 8) { |
| dev_warn(&state->i2c->dev, "%s: firmware header is missing\n", |
| KBUILD_MODNAME); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| if (data[0] != 1 || data[1] != 0) { |
| dev_warn(&state->i2c->dev, "%s: firmware file version is wrong\n", |
| KBUILD_MODNAME); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| patch_version = data[2]; |
| block_count = data[4]; |
| crc_expected = data[7] << 8 | data[6]; |
| |
| /* start uploading fw */ |
| /* boot/wdog status */ |
| ret = si2165_writereg8(state, 0x0341, 0x00); |
| if (ret < 0) |
| goto error; |
| /* reset */ |
| ret = si2165_writereg8(state, 0x00c0, 0x00); |
| if (ret < 0) |
| goto error; |
| /* boot/wdog status */ |
| ret = si2165_readreg8(state, 0x0341, val); |
| if (ret < 0) |
| goto error; |
| |
| /* enable reset on error */ |
| ret = si2165_readreg8(state, 0x035c, val); |
| if (ret < 0) |
| goto error; |
| ret = si2165_readreg8(state, 0x035c, val); |
| if (ret < 0) |
| goto error; |
| ret = si2165_writereg8(state, 0x035c, 0x02); |
| if (ret < 0) |
| goto error; |
| |
| /* start right after the header */ |
| offset = 8; |
| |
| dev_info(&state->i2c->dev, "%s: si2165_upload_firmware extracted patch_version=0x%02x, block_count=0x%02x, crc_expected=0x%04x\n", |
| KBUILD_MODNAME, patch_version, block_count, crc_expected); |
| |
| ret = si2165_upload_firmware_block(state, data, len, &offset, 1); |
| if (ret < 0) |
| goto error; |
| |
| ret = si2165_writereg8(state, 0x0344, patch_version); |
| if (ret < 0) |
| goto error; |
| |
| /* reset crc */ |
| ret = si2165_writereg8(state, 0x0379, 0x01); |
| if (ret) |
| goto error; |
| |
| ret = si2165_upload_firmware_block(state, data, len, |
| &offset, block_count); |
| if (ret < 0) { |
| dev_err(&state->i2c->dev, |
| "%s: firmare could not be uploaded\n", |
| KBUILD_MODNAME); |
| goto error; |
| } |
| |
| /* read crc */ |
| ret = si2165_readreg16(state, 0x037a, &val16); |
| if (ret) |
| goto error; |
| |
| if (val16 != crc_expected) { |
| dev_err(&state->i2c->dev, |
| "%s: firmware crc mismatch %04x != %04x\n", |
| KBUILD_MODNAME, val16, crc_expected); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| ret = si2165_upload_firmware_block(state, data, len, &offset, 5); |
| if (ret) |
| goto error; |
| |
| if (len != offset) { |
| dev_err(&state->i2c->dev, |
| "%s: firmare len mismatch %04x != %04x\n", |
| KBUILD_MODNAME, len, offset); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| /* reset watchdog error register */ |
| ret = si2165_writereg_mask8(state, 0x0341, 0x02, 0x02); |
| if (ret < 0) |
| goto error; |
| |
| /* enable reset on error */ |
| ret = si2165_writereg_mask8(state, 0x035c, 0x01, 0x01); |
| if (ret < 0) |
| goto error; |
| |
| dev_info(&state->i2c->dev, "%s: fw load finished\n", KBUILD_MODNAME); |
| |
| ret = 0; |
| state->firmware_loaded = true; |
| error: |
| if (fw) { |
| release_firmware(fw); |
| fw = NULL; |
| } |
| |
| return ret; |
| } |
| |
| static int si2165_init(struct dvb_frontend *fe) |
| { |
| int ret = 0; |
| struct si2165_state *state = fe->demodulator_priv; |
| u8 val; |
| u8 patch_version = 0x00; |
| |
| dprintk("%s: called\n", __func__); |
| |
| /* powerup */ |
| ret = si2165_writereg8(state, 0x0000, state->config.chip_mode); |
| if (ret < 0) |
| goto error; |
| /* dsp_clock_enable */ |
| ret = si2165_writereg8(state, 0x0104, 0x01); |
| if (ret < 0) |
| goto error; |
| ret = si2165_readreg8(state, 0x0000, &val); /* verify chip_mode */ |
| if (ret < 0) |
| goto error; |
| if (val != state->config.chip_mode) { |
| dev_err(&state->i2c->dev, "%s: could not set chip_mode\n", |
| KBUILD_MODNAME); |
| return -EINVAL; |
| } |
| |
| /* agc */ |
| ret = si2165_writereg8(state, 0x018b, 0x00); |
| if (ret < 0) |
| goto error; |
| ret = si2165_writereg8(state, 0x0190, 0x01); |
| if (ret < 0) |
| goto error; |
| ret = si2165_writereg8(state, 0x0170, 0x00); |
| if (ret < 0) |
| goto error; |
| ret = si2165_writereg8(state, 0x0171, 0x07); |
| if (ret < 0) |
| goto error; |
| /* rssi pad */ |
| ret = si2165_writereg8(state, 0x0646, 0x00); |
| if (ret < 0) |
| goto error; |
| ret = si2165_writereg8(state, 0x0641, 0x00); |
| if (ret < 0) |
| goto error; |
| |
| ret = si2165_init_pll(state); |
| if (ret < 0) |
| goto error; |
| |
| /* enable chip_init */ |
| ret = si2165_writereg8(state, 0x0050, 0x01); |
| if (ret < 0) |
| goto error; |
| /* set start_init */ |
| ret = si2165_writereg8(state, 0x0096, 0x01); |
| if (ret < 0) |
| goto error; |
| ret = si2165_wait_init_done(state); |
| if (ret < 0) |
| goto error; |
| |
| /* disable chip_init */ |
| ret = si2165_writereg8(state, 0x0050, 0x00); |
| if (ret < 0) |
| goto error; |
| |
| /* ber_pkt */ |
| ret = si2165_writereg16(state, 0x0470 , 0x7530); |
| if (ret < 0) |
| goto error; |
| |
| ret = si2165_readreg8(state, 0x0344, &patch_version); |
| if (ret < 0) |
| goto error; |
| |
| ret = si2165_writereg8(state, 0x00cb, 0x00); |
| if (ret < 0) |
| goto error; |
| |
| /* dsp_addr_jump */ |
| ret = si2165_writereg32(state, 0x0348, 0xf4000000); |
| if (ret < 0) |
| goto error; |
| /* boot/wdog status */ |
| ret = si2165_readreg8(state, 0x0341, &val); |
| if (ret < 0) |
| goto error; |
| |
| if (patch_version == 0x00) { |
| ret = si2165_upload_firmware(state); |
| if (ret < 0) |
| goto error; |
| } |
| |
| /* write adc values after each reset*/ |
| ret = si2165_writereg8(state, 0x012a, 0x46); |
| if (ret < 0) |
| goto error; |
| ret = si2165_writereg8(state, 0x012c, 0x00); |
| if (ret < 0) |
| goto error; |
| ret = si2165_writereg8(state, 0x012e, 0x0a); |
| if (ret < 0) |
| goto error; |
| ret = si2165_writereg8(state, 0x012f, 0xff); |
| if (ret < 0) |
| goto error; |
| ret = si2165_writereg8(state, 0x0123, 0x70); |
| if (ret < 0) |
| goto error; |
| |
| return 0; |
| error: |
| return ret; |
| } |
| |
| static int si2165_sleep(struct dvb_frontend *fe) |
| { |
| int ret; |
| struct si2165_state *state = fe->demodulator_priv; |
| |
| /* dsp clock disable */ |
| ret = si2165_writereg8(state, 0x0104, 0x00); |
| if (ret < 0) |
| return ret; |
| /* chip mode */ |
| ret = si2165_writereg8(state, 0x0000, SI2165_MODE_OFF); |
| if (ret < 0) |
| return ret; |
| return 0; |
| } |
| |
| static int si2165_read_status(struct dvb_frontend *fe, fe_status_t *status) |
| { |
| int ret; |
| u8 fec_lock = 0; |
| struct si2165_state *state = fe->demodulator_priv; |
| |
| if (!state->has_dvbt) |
| return -EINVAL; |
| |
| /* check fec_lock */ |
| ret = si2165_readreg8(state, 0x4e0, &fec_lock); |
| if (ret < 0) |
| return ret; |
| *status = 0; |
| if (fec_lock & 0x01) { |
| *status |= FE_HAS_SIGNAL; |
| *status |= FE_HAS_CARRIER; |
| *status |= FE_HAS_VITERBI; |
| *status |= FE_HAS_SYNC; |
| *status |= FE_HAS_LOCK; |
| } |
| |
| return 0; |
| } |
| |
| static int si2165_set_oversamp(struct si2165_state *state, u32 dvb_rate) |
| { |
| u64 oversamp; |
| u32 reg_value; |
| |
| oversamp = si2165_get_fe_clk(state); |
| oversamp <<= 23; |
| do_div(oversamp, dvb_rate); |
| reg_value = oversamp & 0x3fffffff; |
| |
| /* oversamp, usbdump contained 0x03100000; */ |
| return si2165_writereg32(state, 0x00e4, reg_value); |
| } |
| |
| static int si2165_set_if_freq_shift(struct si2165_state *state, u32 IF) |
| { |
| u64 if_freq_shift; |
| s32 reg_value = 0; |
| u32 fe_clk = si2165_get_fe_clk(state); |
| |
| if_freq_shift = IF; |
| if_freq_shift <<= 29; |
| |
| do_div(if_freq_shift, fe_clk); |
| reg_value = (s32)if_freq_shift; |
| |
| if (state->config.inversion) |
| reg_value = -reg_value; |
| |
| reg_value = reg_value & 0x1fffffff; |
| |
| /* if_freq_shift, usbdump contained 0x023ee08f; */ |
| return si2165_writereg32(state, 0x00e8, reg_value); |
| } |
| |
| static int si2165_set_parameters(struct dvb_frontend *fe) |
| { |
| int ret; |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct si2165_state *state = fe->demodulator_priv; |
| u8 val[3]; |
| u32 IF; |
| u32 dvb_rate = 0; |
| u16 bw10k; |
| |
| dprintk("%s: called\n", __func__); |
| |
| if (!fe->ops.tuner_ops.get_if_frequency) { |
| dev_err(&state->i2c->dev, |
| "%s: Error: get_if_frequency() not defined at tuner. Can't work without it!\n", |
| KBUILD_MODNAME); |
| return -EINVAL; |
| } |
| |
| if (!state->has_dvbt) |
| return -EINVAL; |
| |
| if (p->bandwidth_hz > 0) { |
| dvb_rate = p->bandwidth_hz * 8 / 7; |
| bw10k = p->bandwidth_hz / 10000; |
| } else { |
| dvb_rate = 8 * 8 / 7; |
| bw10k = 800; |
| } |
| |
| /* standard = DVB-T */ |
| ret = si2165_writereg8(state, 0x00ec, 0x01); |
| if (ret < 0) |
| return ret; |
| ret = si2165_adjust_pll_divl(state, 12); |
| if (ret < 0) |
| return ret; |
| |
| fe->ops.tuner_ops.get_if_frequency(fe, &IF); |
| ret = si2165_set_if_freq_shift(state, IF); |
| if (ret < 0) |
| return ret; |
| ret = si2165_writereg8(state, 0x08f8, 0x00); |
| if (ret < 0) |
| return ret; |
| /* ts output config */ |
| ret = si2165_writereg8(state, 0x04e4, 0x20); |
| if (ret < 0) |
| return ret; |
| ret = si2165_writereg16(state, 0x04ef, 0x00fe); |
| if (ret < 0) |
| return ret; |
| ret = si2165_writereg24(state, 0x04f4, 0x555555); |
| if (ret < 0) |
| return ret; |
| ret = si2165_writereg8(state, 0x04e5, 0x01); |
| if (ret < 0) |
| return ret; |
| /* bandwidth in 10KHz steps */ |
| ret = si2165_writereg16(state, 0x0308, bw10k); |
| if (ret < 0) |
| return ret; |
| ret = si2165_set_oversamp(state, dvb_rate); |
| if (ret < 0) |
| return ret; |
| /* impulsive_noise_remover */ |
| ret = si2165_writereg8(state, 0x031c, 0x01); |
| if (ret < 0) |
| return ret; |
| ret = si2165_writereg8(state, 0x00cb, 0x00); |
| if (ret < 0) |
| return ret; |
| /* agc2 */ |
| ret = si2165_writereg8(state, 0x016e, 0x41); |
| if (ret < 0) |
| return ret; |
| ret = si2165_writereg8(state, 0x016c, 0x0e); |
| if (ret < 0) |
| return ret; |
| ret = si2165_writereg8(state, 0x016d, 0x10); |
| if (ret < 0) |
| return ret; |
| /* agc */ |
| ret = si2165_writereg8(state, 0x015b, 0x03); |
| if (ret < 0) |
| return ret; |
| ret = si2165_writereg8(state, 0x0150, 0x78); |
| if (ret < 0) |
| return ret; |
| /* agc */ |
| ret = si2165_writereg8(state, 0x01a0, 0x78); |
| if (ret < 0) |
| return ret; |
| ret = si2165_writereg8(state, 0x01c8, 0x68); |
| if (ret < 0) |
| return ret; |
| /* freq_sync_range */ |
| ret = si2165_writereg16(state, 0x030c, 0x0064); |
| if (ret < 0) |
| return ret; |
| /* gp_reg0 */ |
| ret = si2165_readreg8(state, 0x0387, val); |
| if (ret < 0) |
| return ret; |
| ret = si2165_writereg8(state, 0x0387, 0x00); |
| if (ret < 0) |
| return ret; |
| /* dsp_addr_jump */ |
| ret = si2165_writereg32(state, 0x0348, 0xf4000000); |
| if (ret < 0) |
| return ret; |
| |
| if (fe->ops.tuner_ops.set_params) |
| fe->ops.tuner_ops.set_params(fe); |
| |
| /* recalc if_freq_shift if IF might has changed */ |
| fe->ops.tuner_ops.get_if_frequency(fe, &IF); |
| ret = si2165_set_if_freq_shift(state, IF); |
| if (ret < 0) |
| return ret; |
| |
| /* boot/wdog status */ |
| ret = si2165_readreg8(state, 0x0341, val); |
| if (ret < 0) |
| return ret; |
| ret = si2165_writereg8(state, 0x0341, 0x00); |
| if (ret < 0) |
| return ret; |
| /* reset all */ |
| ret = si2165_writereg8(state, 0x00c0, 0x00); |
| if (ret < 0) |
| return ret; |
| /* gp_reg0 */ |
| ret = si2165_writereg32(state, 0x0384, 0x00000000); |
| if (ret < 0) |
| return ret; |
| /* start_synchro */ |
| ret = si2165_writereg8(state, 0x02e0, 0x01); |
| if (ret < 0) |
| return ret; |
| /* boot/wdog status */ |
| ret = si2165_readreg8(state, 0x0341, val); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void si2165_release(struct dvb_frontend *fe) |
| { |
| struct si2165_state *state = fe->demodulator_priv; |
| |
| dprintk("%s: called\n", __func__); |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops si2165_ops = { |
| .info = { |
| .name = "Silicon Labs ", |
| .caps = FE_CAN_FEC_1_2 | |
| FE_CAN_FEC_2_3 | |
| FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | |
| FE_CAN_FEC_7_8 | |
| FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | |
| FE_CAN_QAM_16 | |
| FE_CAN_QAM_32 | |
| FE_CAN_QAM_64 | |
| FE_CAN_QAM_128 | |
| FE_CAN_QAM_256 | |
| FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_HIERARCHY_AUTO | |
| FE_CAN_MUTE_TS | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_RECOVER |
| }, |
| |
| .get_tune_settings = si2165_get_tune_settings, |
| |
| .init = si2165_init, |
| .sleep = si2165_sleep, |
| |
| .set_frontend = si2165_set_parameters, |
| .read_status = si2165_read_status, |
| |
| .release = si2165_release, |
| }; |
| |
| struct dvb_frontend *si2165_attach(const struct si2165_config *config, |
| struct i2c_adapter *i2c) |
| { |
| struct si2165_state *state = NULL; |
| int n; |
| int io_ret; |
| u8 val; |
| char rev_char; |
| const char *chip_name; |
| |
| if (config == NULL || i2c == NULL) |
| goto error; |
| |
| /* allocate memory for the internal state */ |
| state = kzalloc(sizeof(struct si2165_state), GFP_KERNEL); |
| if (state == NULL) |
| goto error; |
| |
| /* setup the state */ |
| state->i2c = i2c; |
| state->config = *config; |
| |
| if (state->config.ref_freq_Hz < 4000000 |
| || state->config.ref_freq_Hz > 27000000) { |
| dev_err(&state->i2c->dev, "%s: ref_freq of %d Hz not supported by this driver\n", |
| KBUILD_MODNAME, state->config.ref_freq_Hz); |
| goto error; |
| } |
| |
| /* create dvb_frontend */ |
| memcpy(&state->frontend.ops, &si2165_ops, |
| sizeof(struct dvb_frontend_ops)); |
| state->frontend.demodulator_priv = state; |
| |
| /* powerup */ |
| io_ret = si2165_writereg8(state, 0x0000, state->config.chip_mode); |
| if (io_ret < 0) |
| goto error; |
| |
| io_ret = si2165_readreg8(state, 0x0000, &val); |
| if (io_ret < 0) |
| goto error; |
| if (val != state->config.chip_mode) |
| goto error; |
| |
| io_ret = si2165_readreg8(state, 0x0023, &state->chip_revcode); |
| if (io_ret < 0) |
| goto error; |
| |
| io_ret = si2165_readreg8(state, 0x0118, &state->chip_type); |
| if (io_ret < 0) |
| goto error; |
| |
| /* powerdown */ |
| io_ret = si2165_writereg8(state, 0x0000, SI2165_MODE_OFF); |
| if (io_ret < 0) |
| goto error; |
| |
| if (state->chip_revcode < 26) |
| rev_char = 'A' + state->chip_revcode; |
| else |
| rev_char = '?'; |
| |
| switch (state->chip_type) { |
| case 0x06: |
| chip_name = "Si2161"; |
| state->has_dvbt = true; |
| break; |
| case 0x07: |
| chip_name = "Si2165"; |
| state->has_dvbt = true; |
| state->has_dvbc = true; |
| break; |
| default: |
| dev_err(&state->i2c->dev, "%s: Unsupported Silicon Labs chip (type %d, rev %d)\n", |
| KBUILD_MODNAME, state->chip_type, state->chip_revcode); |
| goto error; |
| } |
| |
| dev_info(&state->i2c->dev, |
| "%s: Detected Silicon Labs %s-%c (type %d, rev %d)\n", |
| KBUILD_MODNAME, chip_name, rev_char, state->chip_type, |
| state->chip_revcode); |
| |
| strlcat(state->frontend.ops.info.name, chip_name, |
| sizeof(state->frontend.ops.info.name)); |
| |
| n = 0; |
| if (state->has_dvbt) { |
| state->frontend.ops.delsys[n++] = SYS_DVBT; |
| strlcat(state->frontend.ops.info.name, " DVB-T", |
| sizeof(state->frontend.ops.info.name)); |
| } |
| if (state->has_dvbc) |
| dev_warn(&state->i2c->dev, "%s: DVB-C is not yet supported.\n", |
| KBUILD_MODNAME); |
| |
| return &state->frontend; |
| |
| error: |
| kfree(state); |
| return NULL; |
| } |
| EXPORT_SYMBOL(si2165_attach); |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); |
| |
| MODULE_DESCRIPTION("Silicon Labs Si2165 DVB-C/-T Demodulator driver"); |
| MODULE_AUTHOR("Matthias Schwarzott <zzam@gentoo.org>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE(SI2165_FIRMWARE_REV_D); |