blob: 6f1b9aace8b340cea12555bb2dd1eaf777c54d96 [file] [log] [blame]
/*
* Firmware I/O code for mac80211 ST-Ericsson CW1200 drivers
*
* Copyright (c) 2010, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*
* Based on:
* ST-Ericsson UMAC CW1200 driver which is
* Copyright (c) 2010, ST-Ericsson
* Author: Ajitpal Singh <ajitpal.singh@stericsson.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/vmalloc.h>
#include <linux/sched.h>
#include <linux/firmware.h>
#include "cw1200.h"
#include "fwio.h"
#include "hwio.h"
#include "hwbus.h"
#include "bh.h"
static int cw1200_get_hw_type(u32 config_reg_val, int *major_revision)
{
int hw_type = -1;
u32 silicon_type = (config_reg_val >> 24) & 0x7;
u32 silicon_vers = (config_reg_val >> 31) & 0x1;
switch (silicon_type) {
case 0x00:
*major_revision = 1;
hw_type = HIF_9000_SILICON_VERSATILE;
break;
case 0x01:
case 0x02: /* CW1x00 */
case 0x04: /* CW1x60 */
*major_revision = silicon_type;
if (silicon_vers)
hw_type = HIF_8601_VERSATILE;
else
hw_type = HIF_8601_SILICON;
break;
default:
break;
}
return hw_type;
}
static int cw1200_load_firmware_cw1200(struct cw1200_common *priv)
{
int ret, block, num_blocks;
unsigned i;
u32 val32;
u32 put = 0, get = 0;
u8 *buf = NULL;
const char *fw_path;
const struct firmware *firmware = NULL;
/* Macroses are local. */
#define APB_WRITE(reg, val) \
do { \
ret = cw1200_apb_write_32(priv, CW1200_APB(reg), (val)); \
if (ret < 0) \
goto error; \
} while (0)
#define APB_READ(reg, val) \
do { \
ret = cw1200_apb_read_32(priv, CW1200_APB(reg), &(val)); \
if (ret < 0) \
goto error; \
} while (0)
#define REG_WRITE(reg, val) \
do { \
ret = cw1200_reg_write_32(priv, (reg), (val)); \
if (ret < 0) \
goto error; \
} while (0)
#define REG_READ(reg, val) \
do { \
ret = cw1200_reg_read_32(priv, (reg), &(val)); \
if (ret < 0) \
goto error; \
} while (0)
switch (priv->hw_revision) {
case CW1200_HW_REV_CUT10:
fw_path = FIRMWARE_CUT10;
if (!priv->sdd_path)
priv->sdd_path = SDD_FILE_10;
break;
case CW1200_HW_REV_CUT11:
fw_path = FIRMWARE_CUT11;
if (!priv->sdd_path)
priv->sdd_path = SDD_FILE_11;
break;
case CW1200_HW_REV_CUT20:
fw_path = FIRMWARE_CUT20;
if (!priv->sdd_path)
priv->sdd_path = SDD_FILE_20;
break;
case CW1200_HW_REV_CUT22:
fw_path = FIRMWARE_CUT22;
if (!priv->sdd_path)
priv->sdd_path = SDD_FILE_22;
break;
case CW1X60_HW_REV:
fw_path = FIRMWARE_CW1X60;
if (!priv->sdd_path)
priv->sdd_path = SDD_FILE_CW1X60;
break;
default:
pr_err("Invalid silicon revision %d.\n", priv->hw_revision);
return -EINVAL;
}
/* Initialize common registers */
APB_WRITE(DOWNLOAD_IMAGE_SIZE_REG, DOWNLOAD_ARE_YOU_HERE);
APB_WRITE(DOWNLOAD_PUT_REG, 0);
APB_WRITE(DOWNLOAD_GET_REG, 0);
APB_WRITE(DOWNLOAD_STATUS_REG, DOWNLOAD_PENDING);
APB_WRITE(DOWNLOAD_FLAGS_REG, 0);
/* Write the NOP Instruction */
REG_WRITE(ST90TDS_SRAM_BASE_ADDR_REG_ID, 0xFFF20000);
REG_WRITE(ST90TDS_AHB_DPORT_REG_ID, 0xEAFFFFFE);
/* Release CPU from RESET */
REG_READ(ST90TDS_CONFIG_REG_ID, val32);
val32 &= ~ST90TDS_CONFIG_CPU_RESET_BIT;
REG_WRITE(ST90TDS_CONFIG_REG_ID, val32);
/* Enable Clock */
val32 &= ~ST90TDS_CONFIG_CPU_CLK_DIS_BIT;
REG_WRITE(ST90TDS_CONFIG_REG_ID, val32);
/* Load a firmware file */
ret = request_firmware(&firmware, fw_path, priv->pdev);
if (ret) {
pr_err("Can't load firmware file %s.\n", fw_path);
goto error;
}
buf = kmalloc(DOWNLOAD_BLOCK_SIZE, GFP_KERNEL | GFP_DMA);
if (!buf) {
pr_err("Can't allocate firmware load buffer.\n");
ret = -ENOMEM;
goto error;
}
/* Check if the bootloader is ready */
for (i = 0; i < 100; i += 1 + i / 2) {
APB_READ(DOWNLOAD_IMAGE_SIZE_REG, val32);
if (val32 == DOWNLOAD_I_AM_HERE)
break;
mdelay(i);
} /* End of for loop */
if (val32 != DOWNLOAD_I_AM_HERE) {
pr_err("Bootloader is not ready.\n");
ret = -ETIMEDOUT;
goto error;
}
/* Calculcate number of download blocks */
num_blocks = (firmware->size - 1) / DOWNLOAD_BLOCK_SIZE + 1;
/* Updating the length in Download Ctrl Area */
val32 = firmware->size; /* Explicit cast from size_t to u32 */
APB_WRITE(DOWNLOAD_IMAGE_SIZE_REG, val32);
/* Firmware downloading loop */
for (block = 0; block < num_blocks; block++) {
size_t tx_size;
size_t block_size;
/* check the download status */
APB_READ(DOWNLOAD_STATUS_REG, val32);
if (val32 != DOWNLOAD_PENDING) {
pr_err("Bootloader reported error %d.\n", val32);
ret = -EIO;
goto error;
}
/* loop until put - get <= 24K */
for (i = 0; i < 100; i++) {
APB_READ(DOWNLOAD_GET_REG, get);
if ((put - get) <=
(DOWNLOAD_FIFO_SIZE - DOWNLOAD_BLOCK_SIZE))
break;
mdelay(i);
}
if ((put - get) > (DOWNLOAD_FIFO_SIZE - DOWNLOAD_BLOCK_SIZE)) {
pr_err("Timeout waiting for FIFO.\n");
ret = -ETIMEDOUT;
goto error;
}
/* calculate the block size */
tx_size = block_size = min_t(size_t, firmware->size - put,
DOWNLOAD_BLOCK_SIZE);
memcpy(buf, &firmware->data[put], block_size);
if (block_size < DOWNLOAD_BLOCK_SIZE) {
memset(&buf[block_size], 0,
DOWNLOAD_BLOCK_SIZE - block_size);
tx_size = DOWNLOAD_BLOCK_SIZE;
}
/* send the block to sram */
ret = cw1200_apb_write(priv,
CW1200_APB(DOWNLOAD_FIFO_OFFSET +
(put & (DOWNLOAD_FIFO_SIZE - 1))),
buf, tx_size);
if (ret < 0) {
pr_err("Can't write firmware block @ %d!\n",
put & (DOWNLOAD_FIFO_SIZE - 1));
goto error;
}
/* update the put register */
put += block_size;
APB_WRITE(DOWNLOAD_PUT_REG, put);
} /* End of firmware download loop */
/* Wait for the download completion */
for (i = 0; i < 300; i += 1 + i / 2) {
APB_READ(DOWNLOAD_STATUS_REG, val32);
if (val32 != DOWNLOAD_PENDING)
break;
mdelay(i);
}
if (val32 != DOWNLOAD_SUCCESS) {
pr_err("Wait for download completion failed: 0x%.8X\n", val32);
ret = -ETIMEDOUT;
goto error;
} else {
pr_info("Firmware download completed.\n");
ret = 0;
}
error:
kfree(buf);
if (firmware)
release_firmware(firmware);
return ret;
#undef APB_WRITE
#undef APB_READ
#undef REG_WRITE
#undef REG_READ
}
static int config_reg_read(struct cw1200_common *priv, u32 *val)
{
switch (priv->hw_type) {
case HIF_9000_SILICON_VERSATILE: {
u16 val16;
int ret = cw1200_reg_read_16(priv,
ST90TDS_CONFIG_REG_ID,
&val16);
if (ret < 0)
return ret;
*val = val16;
return 0;
}
case HIF_8601_VERSATILE:
case HIF_8601_SILICON:
default:
cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, val);
break;
}
return 0;
}
static int config_reg_write(struct cw1200_common *priv, u32 val)
{
switch (priv->hw_type) {
case HIF_9000_SILICON_VERSATILE:
return cw1200_reg_write_16(priv,
ST90TDS_CONFIG_REG_ID,
(u16)val);
case HIF_8601_VERSATILE:
case HIF_8601_SILICON:
default:
return cw1200_reg_write_32(priv, ST90TDS_CONFIG_REG_ID, val);
}
return 0;
}
int cw1200_load_firmware(struct cw1200_common *priv)
{
int ret;
int i;
u32 val32;
u16 val16;
int major_revision = -1;
/* Read CONFIG Register */
ret = cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32);
if (ret < 0) {
pr_err("Can't read config register.\n");
goto out;
}
if (val32 == 0 || val32 == 0xffffffff) {
pr_err("Bad config register value (0x%08x)\n", val32);
ret = -EIO;
goto out;
}
priv->hw_type = cw1200_get_hw_type(val32, &major_revision);
if (priv->hw_type < 0) {
pr_err("Can't deduce hardware type.\n");
ret = -ENOTSUPP;
goto out;
}
/* Set DPLL Reg value, and read back to confirm writes work */
ret = cw1200_reg_write_32(priv, ST90TDS_TSET_GEN_R_W_REG_ID,
cw1200_dpll_from_clk(priv->hw_refclk));
if (ret < 0) {
pr_err("Can't write DPLL register.\n");
goto out;
}
msleep(20);
ret = cw1200_reg_read_32(priv,
ST90TDS_TSET_GEN_R_W_REG_ID, &val32);
if (ret < 0) {
pr_err("Can't read DPLL register.\n");
goto out;
}
if (val32 != cw1200_dpll_from_clk(priv->hw_refclk)) {
pr_err("Unable to initialise DPLL register. Wrote 0x%.8X, Read 0x%.8X.\n",
cw1200_dpll_from_clk(priv->hw_refclk), val32);
ret = -EIO;
goto out;
}
/* Set wakeup bit in device */
ret = cw1200_reg_read_16(priv, ST90TDS_CONTROL_REG_ID, &val16);
if (ret < 0) {
pr_err("set_wakeup: can't read control register.\n");
goto out;
}
ret = cw1200_reg_write_16(priv, ST90TDS_CONTROL_REG_ID,
val16 | ST90TDS_CONT_WUP_BIT);
if (ret < 0) {
pr_err("set_wakeup: can't write control register.\n");
goto out;
}
/* Wait for wakeup */
for (i = 0; i < 300; i += (1 + i / 2)) {
ret = cw1200_reg_read_16(priv,
ST90TDS_CONTROL_REG_ID, &val16);
if (ret < 0) {
pr_err("wait_for_wakeup: can't read control register.\n");
goto out;
}
if (val16 & ST90TDS_CONT_RDY_BIT)
break;
msleep(i);
}
if ((val16 & ST90TDS_CONT_RDY_BIT) == 0) {
pr_err("wait_for_wakeup: device is not responding.\n");
ret = -ETIMEDOUT;
goto out;
}
switch (major_revision) {
case 1:
/* CW1200 Hardware detection logic : Check for CUT1.1 */
ret = cw1200_ahb_read_32(priv, CW1200_CUT_ID_ADDR, &val32);
if (ret) {
pr_err("HW detection: can't read CUT ID.\n");
goto out;
}
switch (val32) {
case CW1200_CUT_11_ID_STR:
pr_info("CW1x00 Cut 1.1 silicon detected.\n");
priv->hw_revision = CW1200_HW_REV_CUT11;
break;
default:
pr_info("CW1x00 Cut 1.0 silicon detected.\n");
priv->hw_revision = CW1200_HW_REV_CUT10;
break;
}
/* According to ST-E, CUT<2.0 has busted BA TID0-3.
Just disable it entirely...
*/
priv->ba_rx_tid_mask = 0;
priv->ba_tx_tid_mask = 0;
break;
case 2: {
u32 ar1, ar2, ar3;
ret = cw1200_ahb_read_32(priv, CW1200_CUT2_ID_ADDR, &ar1);
if (ret) {
pr_err("(1) HW detection: can't read CUT ID\n");
goto out;
}
ret = cw1200_ahb_read_32(priv, CW1200_CUT2_ID_ADDR + 4, &ar2);
if (ret) {
pr_err("(2) HW detection: can't read CUT ID.\n");
goto out;
}
ret = cw1200_ahb_read_32(priv, CW1200_CUT2_ID_ADDR + 8, &ar3);
if (ret) {
pr_err("(3) HW detection: can't read CUT ID.\n");
goto out;
}
if (ar1 == CW1200_CUT_22_ID_STR1 &&
ar2 == CW1200_CUT_22_ID_STR2 &&
ar3 == CW1200_CUT_22_ID_STR3) {
pr_info("CW1x00 Cut 2.2 silicon detected.\n");
priv->hw_revision = CW1200_HW_REV_CUT22;
} else {
pr_info("CW1x00 Cut 2.0 silicon detected.\n");
priv->hw_revision = CW1200_HW_REV_CUT20;
}
break;
}
case 4:
pr_info("CW1x60 silicon detected.\n");
priv->hw_revision = CW1X60_HW_REV;
break;
default:
pr_err("Unsupported silicon major revision %d.\n",
major_revision);
ret = -ENOTSUPP;
goto out;
}
/* Checking for access mode */
ret = config_reg_read(priv, &val32);
if (ret < 0) {
pr_err("Can't read config register.\n");
goto out;
}
if (!(val32 & ST90TDS_CONFIG_ACCESS_MODE_BIT)) {
pr_err("Device is already in QUEUE mode!\n");
ret = -EINVAL;
goto out;
}
switch (priv->hw_type) {
case HIF_8601_SILICON:
if (priv->hw_revision == CW1X60_HW_REV) {
pr_err("Can't handle CW1160/1260 firmware load yet.\n");
ret = -ENOTSUPP;
goto out;
}
ret = cw1200_load_firmware_cw1200(priv);
break;
default:
pr_err("Can't perform firmware load for hw type %d.\n",
priv->hw_type);
ret = -ENOTSUPP;
goto out;
}
if (ret < 0) {
pr_err("Firmware load error.\n");
goto out;
}
/* Enable interrupt signalling */
priv->hwbus_ops->lock(priv->hwbus_priv);
ret = __cw1200_irq_enable(priv, 1);
priv->hwbus_ops->unlock(priv->hwbus_priv);
if (ret < 0)
goto unsubscribe;
/* Configure device for MESSSAGE MODE */
ret = config_reg_read(priv, &val32);
if (ret < 0) {
pr_err("Can't read config register.\n");
goto unsubscribe;
}
ret = config_reg_write(priv, val32 & ~ST90TDS_CONFIG_ACCESS_MODE_BIT);
if (ret < 0) {
pr_err("Can't write config register.\n");
goto unsubscribe;
}
/* Unless we read the CONFIG Register we are
* not able to get an interrupt
*/
mdelay(10);
config_reg_read(priv, &val32);
out:
return ret;
unsubscribe:
/* Disable interrupt signalling */
priv->hwbus_ops->lock(priv->hwbus_priv);
ret = __cw1200_irq_enable(priv, 0);
priv->hwbus_ops->unlock(priv->hwbus_priv);
return ret;
}