| # |
| # Intel network device configuration |
| # |
| |
| config NET_VENDOR_INTEL |
| bool "Intel devices" |
| default y |
| ---help--- |
| If you have a network (Ethernet) card belonging to this class, say Y. |
| |
| Note that the answer to this question doesn't directly affect the |
| kernel: saying N will just cause the configurator to skip all |
| the questions about Intel cards. If you say Y, you will be asked for |
| your specific card in the following questions. |
| |
| if NET_VENDOR_INTEL |
| |
| config E100 |
| depends on n |
| tristate "Intel(R) PRO/100+ support" |
| depends on m |
| depends on PCI |
| select BPAUTO_MII |
| ---help--- |
| This driver supports Intel(R) PRO/100 family of adapters. |
| To verify that your adapter is supported, find the board ID number |
| on the adapter. Look for a label that has a barcode and a number |
| in the format 123456-001 (six digits hyphen three digits). |
| |
| Use the above information and the Adapter & Driver ID Guide at: |
| |
| <http://support.intel.com/support/network/adapter/pro100/21397.htm> |
| |
| to identify the adapter. |
| |
| For the latest Intel PRO/100 network driver for Linux, see: |
| |
| <http://www.intel.com/p/en_US/support/highlights/network/pro100plus> |
| |
| More specific information on configuring the driver is in |
| <file:Documentation/networking/e100.txt>. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called e100. |
| |
| config E1000 |
| depends on n |
| tristate "Intel(R) PRO/1000 Gigabit Ethernet support" |
| depends on m |
| depends on PCI |
| ---help--- |
| This driver supports Intel(R) PRO/1000 gigabit ethernet family of |
| adapters. For more information on how to identify your adapter, go |
| to the Adapter & Driver ID Guide at: |
| |
| <http://support.intel.com/support/network/adapter/pro100/21397.htm> |
| |
| For general information and support, go to the Intel support |
| website at: |
| |
| <http://support.intel.com> |
| |
| More specific information on configuring the driver is in |
| <file:Documentation/networking/e1000.txt>. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called e1000. |
| |
| config E1000E |
| depends on n |
| tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" |
| depends on m |
| depends on PCI && (!SPARC32 || BROKEN) |
| depends on CRC32 |
| depends on PTP_1588_CLOCK |
| ---help--- |
| This driver supports the PCI-Express Intel(R) PRO/1000 gigabit |
| ethernet family of adapters. For PCI or PCI-X e1000 adapters, |
| use the regular e1000 driver For more information on how to |
| identify your adapter, go to the Adapter & Driver ID Guide at: |
| |
| <http://support.intel.com/support/network/adapter/pro100/21397.htm> |
| |
| For general information and support, go to the Intel support |
| website at: |
| |
| <http://support.intel.com> |
| |
| To compile this driver as a module, choose M here. The module |
| will be called e1000e. |
| |
| config IGB |
| depends on !KERNEL_3_5 |
| tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" |
| depends on m |
| depends on PCI |
| depends on PTP_1588_CLOCK |
| depends on I2C |
| depends on I2C_ALGOBIT |
| ---help--- |
| This driver supports Intel(R) 82575/82576 gigabit ethernet family of |
| adapters. For more information on how to identify your adapter, go |
| to the Adapter & Driver ID Guide at: |
| |
| <http://support.intel.com/support/network/adapter/pro100/21397.htm> |
| |
| For general information and support, go to the Intel support |
| website at: |
| |
| <http://support.intel.com> |
| |
| More specific information on configuring the driver is in |
| <file:Documentation/networking/e1000.txt>. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called igb. |
| |
| config IGB_HWMON |
| bool "Intel(R) PCI-Express Gigabit adapters HWMON support" |
| default y |
| depends on IGB && HWMON && !(IGB=y && HWMON=m) |
| ---help--- |
| Say Y if you want to expose thermal sensor data on Intel devices. |
| |
| Some of our devices contain thermal sensors, both external and internal. |
| This data is available via the hwmon sysfs interface and exposes |
| the onboard sensors. |
| |
| config IGB_DCA |
| bool "Direct Cache Access (DCA) Support" |
| default y |
| depends on IGB && DCA && !(IGB=y && DCA=m) |
| ---help--- |
| Say Y here if you want to use Direct Cache Access (DCA) in the |
| driver. DCA is a method for warming the CPU cache before data |
| is used, with the intent of lessening the impact of cache misses. |
| |
| config IGBVF |
| depends on n |
| tristate "Intel(R) 82576 Virtual Function Ethernet support" |
| depends on m |
| depends on PCI |
| ---help--- |
| This driver supports Intel(R) 82576 virtual functions. For more |
| information on how to identify your adapter, go to the Adapter & |
| Driver ID Guide at: |
| |
| <http://support.intel.com/support/network/adapter/pro100/21397.htm> |
| |
| For general information and support, go to the Intel support |
| website at: |
| |
| <http://support.intel.com> |
| |
| More specific information on configuring the driver is in |
| <file:Documentation/networking/e1000.txt>. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called igbvf. |
| |
| config IXGB |
| depends on n |
| tristate "Intel(R) PRO/10GbE support" |
| depends on m |
| depends on PCI |
| ---help--- |
| This driver supports Intel(R) PRO/10GbE family of adapters for |
| PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver |
| instead. For more information on how to identify your adapter, go |
| to the Adapter & Driver ID Guide at: |
| |
| <http://support.intel.com/support/network/adapter/pro100/21397.htm> |
| |
| For general information and support, go to the Intel support |
| website at: |
| |
| <http://support.intel.com> |
| |
| More specific information on configuring the driver is in |
| <file:Documentation/networking/ixgb.txt>. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called ixgb. |
| |
| config IXGBE |
| depends on n |
| tristate "Intel(R) 10GbE PCI Express adapters support" |
| depends on m |
| depends on PCI |
| select MDIO |
| depends on PTP_1588_CLOCK |
| ---help--- |
| This driver supports Intel(R) 10GbE PCI Express family of |
| adapters. For more information on how to identify your adapter, go |
| to the Adapter & Driver ID Guide at: |
| |
| <http://support.intel.com/support/network/adapter/pro100/21397.htm> |
| |
| For general information and support, go to the Intel support |
| website at: |
| |
| <http://support.intel.com> |
| |
| To compile this driver as a module, choose M here. The module |
| will be called ixgbe. |
| |
| config IXGBE_VXLAN |
| bool "Virtual eXtensible Local Area Network Support" |
| default n |
| depends on IXGBE && VXLAN && !(IXGBE=y && VXLAN=m) |
| ---help--- |
| This allows one to create VXLAN virtual interfaces that provide |
| Layer 2 Networks over Layer 3 Networks. VXLAN is often used |
| to tunnel virtual network infrastructure in virtualized environments. |
| Say Y here if you want to use Virtual eXtensible Local Area Network |
| (VXLAN) in the driver. |
| |
| config IXGBE_HWMON |
| bool "Intel(R) 10GbE PCI Express adapters HWMON support" |
| default y |
| depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m) |
| ---help--- |
| Say Y if you want to expose the thermal sensor data on some of |
| our cards, via a hwmon sysfs interface. |
| |
| config IXGBE_DCA |
| bool "Direct Cache Access (DCA) Support" |
| default y |
| depends on IXGBE && DCA && !(IXGBE=y && DCA=m) |
| ---help--- |
| Say Y here if you want to use Direct Cache Access (DCA) in the |
| driver. DCA is a method for warming the CPU cache before data |
| is used, with the intent of lessening the impact of cache misses. |
| |
| config IXGBE_DCB |
| bool "Data Center Bridging (DCB) Support" |
| default n |
| depends on IXGBE && DCB |
| ---help--- |
| Say Y here if you want to use Data Center Bridging (DCB) in the |
| driver. |
| |
| If unsure, say N. |
| |
| config IXGBEVF |
| depends on n |
| tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support" |
| depends on m |
| depends on PCI_MSI |
| ---help--- |
| This driver supports Intel(R) PCI Express virtual functions for the |
| Intel(R) ixgbe driver. For more information on how to identify your |
| adapter, go to the Adapter & Driver ID Guide at: |
| |
| <http://support.intel.com/support/network/sb/CS-008441.htm> |
| |
| For general information and support, go to the Intel support |
| website at: |
| |
| <http://support.intel.com> |
| |
| More specific information on configuring the driver is in |
| <file:Documentation/networking/ixgbevf.txt>. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called ixgbevf. MSI-X interrupt support is required |
| for this driver to work correctly. |
| |
| config I40E |
| depends on n |
| tristate "Intel(R) Ethernet Controller XL710 Family support" |
| depends on m |
| depends on PTP_1588_CLOCK |
| depends on PCI |
| ---help--- |
| This driver supports Intel(R) Ethernet Controller XL710 Family of |
| devices. For more information on how to identify your adapter, go |
| to the Adapter & Driver ID Guide at: |
| |
| <http://support.intel.com/support/network/adapter/pro100/21397.htm> |
| |
| For general information and support, go to the Intel support |
| website at: |
| |
| <http://support.intel.com> |
| |
| To compile this driver as a module, choose M here. The module |
| will be called i40e. |
| |
| config I40E_VXLAN |
| bool "Virtual eXtensible Local Area Network Support" |
| default n |
| depends on I40E && VXLAN && !(I40E=y && VXLAN=m) |
| ---help--- |
| This allows one to create VXLAN virtual interfaces that provide |
| Layer 2 Networks over Layer 3 Networks. VXLAN is often used |
| to tunnel virtual network infrastructure in virtualized environments. |
| Say Y here if you want to use Virtual eXtensible Local Area Network |
| (VXLAN) in the driver. |
| |
| config I40E_GENEVE |
| bool "Generic Network Virtualization Encapsulation (GENEVE) Support" |
| depends on I40E && GENEVE && !(I40E=y && GENEVE=m) |
| default n |
| ---help--- |
| This allows one to create GENEVE virtual interfaces that provide |
| Layer 2 Networks over Layer 3 Networks. GENEVE is often used |
| to tunnel virtual network infrastructure in virtualized environments. |
| Say Y here if you want to use GENEVE in the driver. |
| |
| config I40E_DCB |
| bool "Data Center Bridging (DCB) Support" |
| default n |
| depends on I40E && DCB |
| ---help--- |
| Say Y here if you want to use Data Center Bridging (DCB) in the |
| driver. |
| |
| If unsure, say N. |
| |
| config I40E_FCOE |
| bool "Fibre Channel over Ethernet (FCoE)" |
| default n |
| depends on I40E && DCB && FCOE |
| ---help--- |
| Say Y here if you want to use Fibre Channel over Ethernet (FCoE) |
| in the driver. This will create new netdev for exclusive FCoE |
| use with XL710 FCoE offloads enabled. |
| |
| If unsure, say N. |
| |
| config I40EVF |
| depends on n |
| tristate "Intel(R) XL710 X710 Virtual Function Ethernet support" |
| depends on m |
| depends on PCI_MSI |
| ---help--- |
| This driver supports Intel(R) XL710 and X710 virtual functions. |
| For more information on how to identify your adapter, go to the |
| Adapter & Driver ID Guide at: |
| |
| <http://support.intel.com/support/network/sb/CS-008441.htm> |
| |
| For general information and support, go to the Intel support |
| website at: |
| |
| <http://support.intel.com> |
| |
| To compile this driver as a module, choose M here. The module |
| will be called i40evf. MSI-X interrupt support is required |
| for this driver to work correctly. |
| |
| config FM10K |
| depends on n |
| tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support" |
| depends on m |
| default n |
| depends on PCI_MSI |
| depends on PTP_1588_CLOCK |
| ---help--- |
| This driver supports Intel(R) FM10000 Ethernet Switch Host |
| Interface. For more information on how to identify your adapter, |
| go to the Adapter & Driver ID Guide at: |
| |
| <http://support.intel.com/support/network/sb/CS-008441.htm> |
| |
| For general information and support, go to the Intel support |
| website at: |
| |
| <http://support.intel.com> |
| |
| To compile this driver as a module, choose M here. The module |
| will be called fm10k. MSI-X interrupt support is required |
| |
| config FM10K_VXLAN |
| bool "Virtual eXtensible Local Area Network Support" |
| default n |
| depends on FM10K && VXLAN && !(FM10K=y && VXLAN=m) |
| ---help--- |
| This allows one to create VXLAN virtual interfaces that provide |
| Layer 2 Networks over Layer 3 Networks. VXLAN is often used |
| to tunnel virtual network infrastructure in virtualized environments. |
| Say Y here if you want to use Virtual eXtensible Local Area Network |
| (VXLAN) in the driver. |
| |
| endif # NET_VENDOR_INTEL |
