gfiber / vendor / opensource / backports / 5d4cad4b0c9842dd6f56b63f15ee51fd32c1c81e / . / drivers / media / i2c / aptina-pll.c

/* | |

* Aptina Sensor PLL Configuration | |

* | |

* Copyright (C) 2012 Laurent Pinchart <laurent.pinchart@ideasonboard.com> | |

* | |

* This program is free software; you can redistribute it and/or | |

* modify it under the terms of the GNU General Public License | |

* version 2 as published by the Free Software Foundation. | |

* | |

* This program is distributed in the hope that it will be useful, but | |

* WITHOUT ANY WARRANTY; without even the implied warranty of | |

* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |

* General Public License for more details. | |

* | |

* You should have received a copy of the GNU General Public License | |

* along with this program; if not, write to the Free Software | |

* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |

* 02110-1301 USA | |

*/ | |

#include <linux/device.h> | |

#include <linux/gcd.h> | |

#include <linux/kernel.h> | |

#include <linux/lcm.h> | |

#include <linux/module.h> | |

#include "aptina-pll.h" | |

int aptina_pll_calculate(struct device *dev, | |

const struct aptina_pll_limits *limits, | |

struct aptina_pll *pll) | |

{ | |

unsigned int mf_min; | |

unsigned int mf_max; | |

unsigned int p1_min; | |

unsigned int p1_max; | |

unsigned int p1; | |

unsigned int div; | |

dev_dbg(dev, "PLL: ext clock %u pix clock %u\n", | |

pll->ext_clock, pll->pix_clock); | |

if (pll->ext_clock < limits->ext_clock_min || | |

pll->ext_clock > limits->ext_clock_max) { | |

dev_err(dev, "pll: invalid external clock frequency.\n"); | |

return -EINVAL; | |

} | |

if (pll->pix_clock == 0 || pll->pix_clock > limits->pix_clock_max) { | |

dev_err(dev, "pll: invalid pixel clock frequency.\n"); | |

return -EINVAL; | |

} | |

/* Compute the multiplier M and combined N*P1 divisor. */ | |

div = gcd(pll->pix_clock, pll->ext_clock); | |

pll->m = pll->pix_clock / div; | |

div = pll->ext_clock / div; | |

/* We now have the smallest M and N*P1 values that will result in the | |

* desired pixel clock frequency, but they might be out of the valid | |

* range. Compute the factor by which we should multiply them given the | |

* following constraints: | |

* | |

* - minimum/maximum multiplier | |

* - minimum/maximum multiplier output clock frequency assuming the | |

* minimum/maximum N value | |

* - minimum/maximum combined N*P1 divisor | |

*/ | |

mf_min = DIV_ROUND_UP(limits->m_min, pll->m); | |

mf_min = max(mf_min, limits->out_clock_min / | |

(pll->ext_clock / limits->n_min * pll->m)); | |

mf_min = max(mf_min, limits->n_min * limits->p1_min / div); | |

mf_max = limits->m_max / pll->m; | |

mf_max = min(mf_max, limits->out_clock_max / | |

(pll->ext_clock / limits->n_max * pll->m)); | |

mf_max = min(mf_max, DIV_ROUND_UP(limits->n_max * limits->p1_max, div)); | |

dev_dbg(dev, "pll: mf min %u max %u\n", mf_min, mf_max); | |

if (mf_min > mf_max) { | |

dev_err(dev, "pll: no valid combined N*P1 divisor.\n"); | |

return -EINVAL; | |

} | |

/* | |

* We're looking for the highest acceptable P1 value for which a | |

* multiplier factor MF exists that fulfills the following conditions: | |

* | |

* 1. p1 is in the [p1_min, p1_max] range given by the limits and is | |

* even | |

* 2. mf is in the [mf_min, mf_max] range computed above | |

* 3. div * mf is a multiple of p1, in order to compute | |

* n = div * mf / p1 | |

* m = pll->m * mf | |

* 4. the internal clock frequency, given by ext_clock / n, is in the | |

* [int_clock_min, int_clock_max] range given by the limits | |

* 5. the output clock frequency, given by ext_clock / n * m, is in the | |

* [out_clock_min, out_clock_max] range given by the limits | |

* | |

* The first naive approach is to iterate over all p1 values acceptable | |

* according to (1) and all mf values acceptable according to (2), and | |

* stop at the first combination that fulfills (3), (4) and (5). This | |

* has a O(n^2) complexity. | |

* | |

* Instead of iterating over all mf values in the [mf_min, mf_max] range | |

* we can compute the mf increment between two acceptable values | |

* according to (3) with | |

* | |

* mf_inc = p1 / gcd(div, p1) (6) | |

* | |

* and round the minimum up to the nearest multiple of mf_inc. This will | |

* restrict the number of mf values to be checked. | |

* | |

* Furthermore, conditions (4) and (5) only restrict the range of | |

* acceptable p1 and mf values by modifying the minimum and maximum | |

* limits. (5) can be expressed as | |

* | |

* ext_clock / (div * mf / p1) * m * mf >= out_clock_min | |

* ext_clock / (div * mf / p1) * m * mf <= out_clock_max | |

* | |

* or | |

* | |

* p1 >= out_clock_min * div / (ext_clock * m) (7) | |

* p1 <= out_clock_max * div / (ext_clock * m) | |

* | |

* Similarly, (4) can be expressed as | |

* | |

* mf >= ext_clock * p1 / (int_clock_max * div) (8) | |

* mf <= ext_clock * p1 / (int_clock_min * div) | |

* | |

* We can thus iterate over the restricted p1 range defined by the | |

* combination of (1) and (7), and then compute the restricted mf range | |

* defined by the combination of (2), (6) and (8). If the resulting mf | |

* range is not empty, any value in the mf range is acceptable. We thus | |

* select the mf lwoer bound and the corresponding p1 value. | |

*/ | |

if (limits->p1_min == 0) { | |

dev_err(dev, "pll: P1 minimum value must be >0.\n"); | |

return -EINVAL; | |

} | |

p1_min = max(limits->p1_min, DIV_ROUND_UP(limits->out_clock_min * div, | |

pll->ext_clock * pll->m)); | |

p1_max = min(limits->p1_max, limits->out_clock_max * div / | |

(pll->ext_clock * pll->m)); | |

for (p1 = p1_max & ~1; p1 >= p1_min; p1 -= 2) { | |

unsigned int mf_inc = p1 / gcd(div, p1); | |

unsigned int mf_high; | |

unsigned int mf_low; | |

mf_low = roundup(max(mf_min, DIV_ROUND_UP(pll->ext_clock * p1, | |

limits->int_clock_max * div)), mf_inc); | |

mf_high = min(mf_max, pll->ext_clock * p1 / | |

(limits->int_clock_min * div)); | |

if (mf_low > mf_high) | |

continue; | |

pll->n = div * mf_low / p1; | |

pll->m *= mf_low; | |

pll->p1 = p1; | |

dev_dbg(dev, "PLL: N %u M %u P1 %u\n", pll->n, pll->m, pll->p1); | |

return 0; | |

} | |

dev_err(dev, "pll: no valid N and P1 divisors found.\n"); | |

return -EINVAL; | |

} | |

EXPORT_SYMBOL_GPL(aptina_pll_calculate); | |

MODULE_DESCRIPTION("Aptina PLL Helpers"); | |

MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); | |

MODULE_LICENSE("GPL v2"); |