| #ifndef _AV7110_HW_H_ |
| #define _AV7110_HW_H_ |
| |
| #include "av7110.h" |
| |
| /* DEBI transfer mode defs */ |
| |
| #define DEBINOSWAP 0x000e0000 |
| #define DEBISWAB 0x001e0000 |
| #define DEBISWAP 0x002e0000 |
| |
| #define ARM_WAIT_FREE (HZ) |
| #define ARM_WAIT_SHAKE (HZ/5) |
| #define ARM_WAIT_OSD (HZ) |
| |
| |
| enum av7110_bootstate |
| { |
| BOOTSTATE_BUFFER_EMPTY = 0, |
| BOOTSTATE_BUFFER_FULL = 1, |
| BOOTSTATE_AV7110_BOOT_COMPLETE = 2 |
| }; |
| |
| enum av7110_type_rec_play_format |
| { RP_None, |
| AudioPES, |
| AudioMp2, |
| AudioPCM, |
| VideoPES, |
| AV_PES |
| }; |
| |
| enum av7110_osd_palette_type |
| { |
| NoPalet = 0, /* No palette */ |
| Pal1Bit = 2, /* 2 colors for 1 Bit Palette */ |
| Pal2Bit = 4, /* 4 colors for 2 bit palette */ |
| Pal4Bit = 16, /* 16 colors for 4 bit palette */ |
| Pal8Bit = 256 /* 256 colors for 16 bit palette */ |
| }; |
| |
| /* switch defines */ |
| #define SB_GPIO 3 |
| #define SB_OFF SAA7146_GPIO_OUTLO /* SlowBlank off (TV-Mode) */ |
| #define SB_ON SAA7146_GPIO_INPUT /* SlowBlank on (AV-Mode) */ |
| #define SB_WIDE SAA7146_GPIO_OUTHI /* SlowBlank 6V (16/9-Mode) (not implemented) */ |
| |
| #define FB_GPIO 1 |
| #define FB_OFF SAA7146_GPIO_LO /* FastBlank off (CVBS-Mode) */ |
| #define FB_ON SAA7146_GPIO_OUTHI /* FastBlank on (RGB-Mode) */ |
| #define FB_LOOP SAA7146_GPIO_INPUT /* FastBlank loop-through (PC graphics ???) */ |
| |
| enum av7110_video_output_mode |
| { |
| NO_OUT = 0, /* disable analog output */ |
| CVBS_RGB_OUT = 1, |
| CVBS_YC_OUT = 2, |
| YC_OUT = 3 |
| }; |
| |
| /* firmware internal msg q status: */ |
| #define GPMQFull 0x0001 /* Main Message Queue Full */ |
| #define GPMQOver 0x0002 /* Main Message Queue Overflow */ |
| #define HPQFull 0x0004 /* High Priority Msg Queue Full */ |
| #define HPQOver 0x0008 |
| #define OSDQFull 0x0010 /* OSD Queue Full */ |
| #define OSDQOver 0x0020 |
| #define GPMQBusy 0x0040 /* Queue not empty, FW >= 261d */ |
| #define HPQBusy 0x0080 |
| #define OSDQBusy 0x0100 |
| |
| /* hw section filter flags */ |
| #define SECTION_EIT 0x01 |
| #define SECTION_SINGLE 0x00 |
| #define SECTION_CYCLE 0x02 |
| #define SECTION_CONTINUOS 0x04 |
| #define SECTION_MODE 0x06 |
| #define SECTION_IPMPE 0x0C /* size up to 4k */ |
| #define SECTION_HIGH_SPEED 0x1C /* larger buffer */ |
| #define DATA_PIPING_FLAG 0x20 /* for Data Piping Filter */ |
| |
| #define PBUFSIZE_NONE 0x0000 |
| #define PBUFSIZE_1P 0x0100 |
| #define PBUFSIZE_2P 0x0200 |
| #define PBUFSIZE_1K 0x0300 |
| #define PBUFSIZE_2K 0x0400 |
| #define PBUFSIZE_4K 0x0500 |
| #define PBUFSIZE_8K 0x0600 |
| #define PBUFSIZE_16K 0x0700 |
| #define PBUFSIZE_32K 0x0800 |
| |
| |
| /* firmware command codes */ |
| enum av7110_osd_command { |
| WCreate, |
| WDestroy, |
| WMoveD, |
| WMoveA, |
| WHide, |
| WTop, |
| DBox, |
| DLine, |
| DText, |
| Set_Font, |
| SetColor, |
| SetBlend, |
| SetWBlend, |
| SetCBlend, |
| SetNonBlend, |
| LoadBmp, |
| BlitBmp, |
| ReleaseBmp, |
| SetWTrans, |
| SetWNoTrans, |
| Set_Palette |
| }; |
| |
| enum av7110_pid_command { |
| MultiPID, |
| VideoPID, |
| AudioPID, |
| InitFilt, |
| FiltError, |
| NewVersion, |
| CacheError, |
| AddPIDFilter, |
| DelPIDFilter, |
| Scan, |
| SetDescr, |
| SetIR, |
| FlushTSQueue |
| }; |
| |
| enum av7110_mpeg_command { |
| SelAudChannels |
| }; |
| |
| enum av7110_audio_command { |
| AudioDAC, |
| CabADAC, |
| ON22K, |
| OFF22K, |
| MainSwitch, |
| ADSwitch, |
| SendDiSEqC, |
| SetRegister, |
| SpdifSwitch |
| }; |
| |
| enum av7110_request_command { |
| AudioState, |
| AudioBuffState, |
| VideoState1, |
| VideoState2, |
| VideoState3, |
| CrashCounter, |
| ReqVersion, |
| ReqVCXO, |
| ReqRegister, |
| ReqSecFilterError, |
| ReqSTC |
| }; |
| |
| enum av7110_encoder_command { |
| SetVidMode, |
| SetTestMode, |
| LoadVidCode, |
| SetMonitorType, |
| SetPanScanType, |
| SetFreezeMode, |
| SetWSSConfig |
| }; |
| |
| enum av7110_rec_play_state { |
| __Record, |
| __Stop, |
| __Play, |
| __Pause, |
| __Slow, |
| __FF_IP, |
| __Scan_I, |
| __Continue |
| }; |
| |
| enum av7110_fw_cmd_misc { |
| AV7110_FW_VIDEO_ZOOM = 1, |
| AV7110_FW_VIDEO_COMMAND, |
| AV7110_FW_AUDIO_COMMAND |
| }; |
| |
| enum av7110_command_type { |
| COMTYPE_NOCOM, |
| COMTYPE_PIDFILTER, |
| COMTYPE_MPEGDECODER, |
| COMTYPE_OSD, |
| COMTYPE_BMP, |
| COMTYPE_ENCODER, |
| COMTYPE_AUDIODAC, |
| COMTYPE_REQUEST, |
| COMTYPE_SYSTEM, |
| COMTYPE_REC_PLAY, |
| COMTYPE_COMMON_IF, |
| COMTYPE_PID_FILTER, |
| COMTYPE_PES, |
| COMTYPE_TS, |
| COMTYPE_VIDEO, |
| COMTYPE_AUDIO, |
| COMTYPE_CI_LL, |
| COMTYPE_MISC = 0x80 |
| }; |
| |
| #define VID_NONE_PREF 0x00 /* No aspect ration processing preferred */ |
| #define VID_PAN_SCAN_PREF 0x01 /* Pan and Scan Display preferred */ |
| #define VID_VERT_COMP_PREF 0x02 /* Vertical compression display preferred */ |
| #define VID_VC_AND_PS_PREF 0x03 /* PanScan and vertical Compression if allowed */ |
| #define VID_CENTRE_CUT_PREF 0x05 /* PanScan with zero vector */ |
| |
| /* MPEG video decoder commands */ |
| #define AV_VIDEO_CMD_STOP 0x000e |
| #define AV_VIDEO_CMD_PLAY 0x000d |
| #define AV_VIDEO_CMD_FREEZE 0x0102 |
| #define AV_VIDEO_CMD_FFWD 0x0016 |
| #define AV_VIDEO_CMD_SLOW 0x0022 |
| |
| /* MPEG audio decoder commands */ |
| #define AUDIO_CMD_MUTE 0x0001 |
| #define AUDIO_CMD_UNMUTE 0x0002 |
| #define AUDIO_CMD_PCM16 0x0010 |
| #define AUDIO_CMD_STEREO 0x0080 |
| #define AUDIO_CMD_MONO_L 0x0100 |
| #define AUDIO_CMD_MONO_R 0x0200 |
| #define AUDIO_CMD_SYNC_OFF 0x000e |
| #define AUDIO_CMD_SYNC_ON 0x000f |
| |
| /* firmware data interface codes */ |
| #define DATA_NONE 0x00 |
| #define DATA_FSECTION 0x01 |
| #define DATA_IPMPE 0x02 |
| #define DATA_MPEG_RECORD 0x03 |
| #define DATA_DEBUG_MESSAGE 0x04 |
| #define DATA_COMMON_INTERFACE 0x05 |
| #define DATA_MPEG_PLAY 0x06 |
| #define DATA_BMP_LOAD 0x07 |
| #define DATA_IRCOMMAND 0x08 |
| #define DATA_PIPING 0x09 |
| #define DATA_STREAMING 0x0a |
| #define DATA_CI_GET 0x0b |
| #define DATA_CI_PUT 0x0c |
| #define DATA_MPEG_VIDEO_EVENT 0x0d |
| |
| #define DATA_PES_RECORD 0x10 |
| #define DATA_PES_PLAY 0x11 |
| #define DATA_TS_RECORD 0x12 |
| #define DATA_TS_PLAY 0x13 |
| |
| /* ancient CI command codes, only two are actually still used |
| * by the link level CI firmware */ |
| #define CI_CMD_ERROR 0x00 |
| #define CI_CMD_ACK 0x01 |
| #define CI_CMD_SYSTEM_READY 0x02 |
| #define CI_CMD_KEYPRESS 0x03 |
| #define CI_CMD_ON_TUNED 0x04 |
| #define CI_CMD_ON_SWITCH_PROGRAM 0x05 |
| #define CI_CMD_SECTION_ARRIVED 0x06 |
| #define CI_CMD_SECTION_TIMEOUT 0x07 |
| #define CI_CMD_TIME 0x08 |
| #define CI_CMD_ENTER_MENU 0x09 |
| #define CI_CMD_FAST_PSI 0x0a |
| #define CI_CMD_GET_SLOT_INFO 0x0b |
| |
| #define CI_MSG_NONE 0x00 |
| #define CI_MSG_CI_INFO 0x01 |
| #define CI_MSG_MENU 0x02 |
| #define CI_MSG_LIST 0x03 |
| #define CI_MSG_TEXT 0x04 |
| #define CI_MSG_REQUEST_INPUT 0x05 |
| #define CI_MSG_INPUT_COMPLETE 0x06 |
| #define CI_MSG_LIST_MORE 0x07 |
| #define CI_MSG_MENU_MORE 0x08 |
| #define CI_MSG_CLOSE_MMI_IMM 0x09 |
| #define CI_MSG_SECTION_REQUEST 0x0a |
| #define CI_MSG_CLOSE_FILTER 0x0b |
| #define CI_PSI_COMPLETE 0x0c |
| #define CI_MODULE_READY 0x0d |
| #define CI_SWITCH_PRG_REPLY 0x0e |
| #define CI_MSG_TEXT_MORE 0x0f |
| |
| #define CI_MSG_CA_PMT 0xe0 |
| #define CI_MSG_ERROR 0xf0 |
| |
| |
| /* base address of the dual ported RAM which serves as communication |
| * area between PCI bus and av7110, |
| * as seen by the DEBI bus of the saa7146 */ |
| #define DPRAM_BASE 0x4000 |
| |
| /* boot protocol area */ |
| #define AV7110_BOOT_STATE (DPRAM_BASE + 0x3F8) |
| #define AV7110_BOOT_SIZE (DPRAM_BASE + 0x3FA) |
| #define AV7110_BOOT_BASE (DPRAM_BASE + 0x3FC) |
| #define AV7110_BOOT_BLOCK (DPRAM_BASE + 0x400) |
| #define AV7110_BOOT_MAX_SIZE 0xc00 |
| |
| /* firmware command protocol area */ |
| #define IRQ_STATE (DPRAM_BASE + 0x0F4) |
| #define IRQ_STATE_EXT (DPRAM_BASE + 0x0F6) |
| #define MSGSTATE (DPRAM_BASE + 0x0F8) |
| #define COMMAND (DPRAM_BASE + 0x0FC) |
| #define COM_BUFF (DPRAM_BASE + 0x100) |
| #define COM_BUFF_SIZE 0x20 |
| |
| /* various data buffers */ |
| #define BUFF1_BASE (DPRAM_BASE + 0x120) |
| #define BUFF1_SIZE 0xE0 |
| |
| #define DATA_BUFF0_BASE (DPRAM_BASE + 0x200) |
| #define DATA_BUFF0_SIZE 0x0800 |
| |
| #define DATA_BUFF1_BASE (DATA_BUFF0_BASE+DATA_BUFF0_SIZE) |
| #define DATA_BUFF1_SIZE 0x0800 |
| |
| #define DATA_BUFF2_BASE (DATA_BUFF1_BASE+DATA_BUFF1_SIZE) |
| #define DATA_BUFF2_SIZE 0x0800 |
| |
| #define DATA_BUFF3_BASE (DATA_BUFF2_BASE+DATA_BUFF2_SIZE) |
| #define DATA_BUFF3_SIZE 0x0400 |
| |
| #define Reserved (DPRAM_BASE + 0x1E00) |
| #define Reserved_SIZE 0x1C0 |
| |
| |
| /* firmware status area */ |
| #define STATUS_BASE (DPRAM_BASE + 0x1FC0) |
| #define STATUS_LOOPS (STATUS_BASE + 0x08) |
| |
| #define STATUS_MPEG_WIDTH (STATUS_BASE + 0x0C) |
| /* ((aspect_ratio & 0xf) << 12) | (height & 0xfff) */ |
| #define STATUS_MPEG_HEIGHT_AR (STATUS_BASE + 0x0E) |
| |
| /* firmware data protocol area */ |
| #define RX_TYPE (DPRAM_BASE + 0x1FE8) |
| #define RX_LEN (DPRAM_BASE + 0x1FEA) |
| #define TX_TYPE (DPRAM_BASE + 0x1FEC) |
| #define TX_LEN (DPRAM_BASE + 0x1FEE) |
| |
| #define RX_BUFF (DPRAM_BASE + 0x1FF4) |
| #define TX_BUFF (DPRAM_BASE + 0x1FF6) |
| |
| #define HANDSHAKE_REG (DPRAM_BASE + 0x1FF8) |
| #define COM_IF_LOCK (DPRAM_BASE + 0x1FFA) |
| |
| #define IRQ_RX (DPRAM_BASE + 0x1FFC) |
| #define IRQ_TX (DPRAM_BASE + 0x1FFE) |
| |
| /* used by boot protocol to load firmware into av7110 DRAM */ |
| #define DRAM_START_CODE 0x2e000404 |
| #define DRAM_MAX_CODE_SIZE 0x00100000 |
| |
| /* saa7146 gpio lines */ |
| #define RESET_LINE 2 |
| #define DEBI_DONE_LINE 1 |
| #define ARM_IRQ_LINE 0 |
| |
| |
| |
| extern int av7110_bootarm(struct av7110 *av7110); |
| extern int av7110_firmversion(struct av7110 *av7110); |
| #define FW_CI_LL_SUPPORT(arm_app) ((arm_app) & 0x80000000) |
| #define FW_4M_SDRAM(arm_app) ((arm_app) & 0x40000000) |
| #define FW_VERSION(arm_app) ((arm_app) & 0x0000FFFF) |
| |
| extern int av7110_wait_msgstate(struct av7110 *av7110, u16 flags); |
| extern int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...); |
| extern int av7110_fw_request(struct av7110 *av7110, u16 *request_buf, |
| int request_buf_len, u16 *reply_buf, int reply_buf_len); |
| |
| |
| /* DEBI (saa7146 data extension bus interface) access */ |
| extern int av7110_debiwrite(struct av7110 *av7110, u32 config, |
| int addr, u32 val, int count); |
| extern u32 av7110_debiread(struct av7110 *av7110, u32 config, |
| int addr, int count); |
| |
| |
| /* DEBI during interrupt */ |
| /* single word writes */ |
| static inline void iwdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count) |
| { |
| av7110_debiwrite(av7110, config, addr, val, count); |
| } |
| |
| /* buffer writes */ |
| static inline void mwdebi(struct av7110 *av7110, u32 config, int addr, |
| const u8 *val, int count) |
| { |
| memcpy(av7110->debi_virt, val, count); |
| av7110_debiwrite(av7110, config, addr, 0, count); |
| } |
| |
| static inline u32 irdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count) |
| { |
| u32 res; |
| |
| res=av7110_debiread(av7110, config, addr, count); |
| if (count<=4) |
| memcpy(av7110->debi_virt, (char *) &res, count); |
| return res; |
| } |
| |
| /* DEBI outside interrupts, only for count <= 4! */ |
| static inline void wdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&av7110->debilock, flags); |
| av7110_debiwrite(av7110, config, addr, val, count); |
| spin_unlock_irqrestore(&av7110->debilock, flags); |
| } |
| |
| static inline u32 rdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count) |
| { |
| unsigned long flags; |
| u32 res; |
| |
| spin_lock_irqsave(&av7110->debilock, flags); |
| res=av7110_debiread(av7110, config, addr, count); |
| spin_unlock_irqrestore(&av7110->debilock, flags); |
| return res; |
| } |
| |
| /* handle mailbox registers of the dual ported RAM */ |
| static inline void ARM_ResetMailBox(struct av7110 *av7110) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&av7110->debilock, flags); |
| av7110_debiread(av7110, DEBINOSWAP, IRQ_RX, 2); |
| av7110_debiwrite(av7110, DEBINOSWAP, IRQ_RX, 0, 2); |
| spin_unlock_irqrestore(&av7110->debilock, flags); |
| } |
| |
| static inline void ARM_ClearMailBox(struct av7110 *av7110) |
| { |
| iwdebi(av7110, DEBINOSWAP, IRQ_RX, 0, 2); |
| } |
| |
| static inline void ARM_ClearIrq(struct av7110 *av7110) |
| { |
| irdebi(av7110, DEBINOSWAP, IRQ_RX, 0, 2); |
| } |
| |
| /**************************************************************************** |
| * Firmware commands |
| ****************************************************************************/ |
| |
| static inline int SendDAC(struct av7110 *av7110, u8 addr, u8 data) |
| { |
| return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, AudioDAC, 2, addr, data); |
| } |
| |
| static inline int av7710_set_video_mode(struct av7110 *av7110, int mode) |
| { |
| return av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetVidMode, 1, mode); |
| } |
| |
| static inline int vidcom(struct av7110 *av7110, u32 com, u32 arg) |
| { |
| return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_VIDEO_COMMAND, 4, |
| (com>>16), (com&0xffff), |
| (arg>>16), (arg&0xffff)); |
| } |
| |
| static inline int audcom(struct av7110 *av7110, u32 com) |
| { |
| return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_AUDIO_COMMAND, 2, |
| (com>>16), (com&0xffff)); |
| } |
| |
| static inline int Set22K(struct av7110 *av7110, int state) |
| { |
| return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, (state ? ON22K : OFF22K), 0); |
| } |
| |
| |
| extern int av7110_diseqc_send(struct av7110 *av7110, int len, u8 *msg, unsigned long burst); |
| |
| |
| #ifdef CPTCFG_DVB_AV7110_OSD |
| extern int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc); |
| extern int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap); |
| #endif /* CPTCFG_DVB_AV7110_OSD */ |
| |
| |
| |
| #endif /* _AV7110_HW_H_ */ |
