| #ifndef DIB8000_H |
| #define DIB8000_H |
| |
| #include "dibx000_common.h" |
| |
| struct dib8000_config { |
| u8 output_mpeg2_in_188_bytes; |
| u8 hostbus_diversity; |
| u8 tuner_is_baseband; |
| int (*update_lna) (struct dvb_frontend *, u16 agc_global); |
| |
| u8 agc_config_count; |
| struct dibx000_agc_config *agc; |
| struct dibx000_bandwidth_config *pll; |
| |
| #define DIB8000_GPIO_DEFAULT_DIRECTIONS 0xffff |
| u16 gpio_dir; |
| #define DIB8000_GPIO_DEFAULT_VALUES 0x0000 |
| u16 gpio_val; |
| #define DIB8000_GPIO_PWM_POS0(v) ((v & 0xf) << 12) |
| #define DIB8000_GPIO_PWM_POS1(v) ((v & 0xf) << 8 ) |
| #define DIB8000_GPIO_PWM_POS2(v) ((v & 0xf) << 4 ) |
| #define DIB8000_GPIO_PWM_POS3(v) (v & 0xf) |
| #define DIB8000_GPIO_DEFAULT_PWM_POS 0xffff |
| u16 gpio_pwm_pos; |
| u16 pwm_freq_div; |
| |
| void (*agc_control) (struct dvb_frontend *, u8 before); |
| |
| u16 drives; |
| u16 diversity_delay; |
| u8 div_cfg; |
| u8 output_mode; |
| u8 refclksel; |
| u8 enMpegOutput:1; |
| |
| struct dibx000_bandwidth_config *plltable; |
| }; |
| |
| #define DEFAULT_DIB8000_I2C_ADDRESS 18 |
| |
| struct dib8000_ops { |
| int (*set_wbd_ref)(struct dvb_frontend *fe, u16 value); |
| int (*update_pll)(struct dvb_frontend *fe, |
| struct dibx000_bandwidth_config *pll, u32 bw, u8 ratio); |
| int (*set_gpio)(struct dvb_frontend *fe, u8 num, u8 dir, u8 val); |
| void (*pwm_agc_reset)(struct dvb_frontend *fe); |
| struct i2c_adapter *(*get_i2c_tuner)(struct dvb_frontend *fe); |
| int (*tuner_sleep)(struct dvb_frontend *fe, int onoff); |
| s32 (*get_adc_power)(struct dvb_frontend *fe, u8 mode); |
| int (*get_dc_power)(struct dvb_frontend *fe, u8 IQ); |
| u32 (*ctrl_timf)(struct dvb_frontend *fe, uint8_t op, uint32_t timf); |
| enum frontend_tune_state (*get_tune_state)(struct dvb_frontend *fe); |
| int (*set_tune_state)(struct dvb_frontend *fe, enum frontend_tune_state tune_state); |
| int (*set_slave_frontend)(struct dvb_frontend *fe, struct dvb_frontend *fe_slave); |
| int (*remove_slave_frontend)(struct dvb_frontend *fe); |
| struct dvb_frontend *(*get_slave_frontend)(struct dvb_frontend *fe, int slave_index); |
| int (*i2c_enumeration)(struct i2c_adapter *host, int no_of_demods, |
| u8 default_addr, u8 first_addr, u8 is_dib8096p); |
| struct i2c_adapter *(*get_i2c_master)(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating); |
| int (*pid_filter_ctrl)(struct dvb_frontend *fe, u8 onoff); |
| int (*pid_filter)(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff); |
| struct dvb_frontend *(*init)(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg); |
| }; |
| |
| #if IS_REACHABLE(CPTCFG_DVB_DIB8000) |
| void *dib8000_attach(struct dib8000_ops *ops); |
| #else |
| static inline int dib8000_attach(struct dib8000_ops *ops) |
| { |
| printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); |
| return NULL; |
| } |
| #endif |
| |
| #endif |