| /* |
| * Montage M88TS2022 silicon tuner driver |
| * |
| * Copyright (C) 2013 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Some calculations are taken from existing TS2020 driver. |
| */ |
| |
| #include "m88ts2022_priv.h" |
| |
| static int m88ts2022_cmd(struct m88ts2022_dev *dev, int op, int sleep, u8 reg, |
| u8 mask, u8 val, u8 *reg_val) |
| { |
| int ret, i; |
| unsigned int utmp; |
| struct m88ts2022_reg_val reg_vals[] = { |
| {0x51, 0x1f - op}, |
| {0x51, 0x1f}, |
| {0x50, 0x00 + op}, |
| {0x50, 0x00}, |
| }; |
| |
| for (i = 0; i < 2; i++) { |
| dev_dbg(&dev->client->dev, |
| "i=%d op=%02x reg=%02x mask=%02x val=%02x\n", |
| i, op, reg, mask, val); |
| |
| for (i = 0; i < ARRAY_SIZE(reg_vals); i++) { |
| ret = regmap_write(dev->regmap, reg_vals[i].reg, |
| reg_vals[i].val); |
| if (ret) |
| goto err; |
| } |
| |
| usleep_range(sleep * 1000, sleep * 10000); |
| |
| ret = regmap_read(dev->regmap, reg, &utmp); |
| if (ret) |
| goto err; |
| |
| if ((utmp & mask) != val) |
| break; |
| } |
| |
| if (reg_val) |
| *reg_val = utmp; |
| err: |
| return ret; |
| } |
| |
| static int m88ts2022_set_params(struct dvb_frontend *fe) |
| { |
| struct m88ts2022_dev *dev = fe->tuner_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret; |
| unsigned int utmp, frequency_khz, frequency_offset_khz, f_3db_hz; |
| unsigned int f_ref_khz, f_vco_khz, div_ref, div_out, pll_n, gdiv28; |
| u8 buf[3], u8tmp, cap_code, lpf_gm, lpf_mxdiv, div_max, div_min; |
| u16 u16tmp; |
| |
| dev_dbg(&dev->client->dev, |
| "frequency=%d symbol_rate=%d rolloff=%d\n", |
| c->frequency, c->symbol_rate, c->rolloff); |
| /* |
| * Integer-N PLL synthesizer |
| * kHz is used for all calculations to keep calculations within 32-bit |
| */ |
| f_ref_khz = DIV_ROUND_CLOSEST(dev->cfg.clock, 1000); |
| div_ref = DIV_ROUND_CLOSEST(f_ref_khz, 2000); |
| |
| if (c->symbol_rate < 5000000) |
| frequency_offset_khz = 3000; /* 3 MHz */ |
| else |
| frequency_offset_khz = 0; |
| |
| frequency_khz = c->frequency + frequency_offset_khz; |
| |
| if (frequency_khz < 1103000) { |
| div_out = 4; |
| u8tmp = 0x1b; |
| } else { |
| div_out = 2; |
| u8tmp = 0x0b; |
| } |
| |
| buf[0] = u8tmp; |
| buf[1] = 0x40; |
| ret = regmap_bulk_write(dev->regmap, 0x10, buf, 2); |
| if (ret) |
| goto err; |
| |
| f_vco_khz = frequency_khz * div_out; |
| pll_n = f_vco_khz * div_ref / f_ref_khz; |
| pll_n += pll_n % 2; |
| dev->frequency_khz = pll_n * f_ref_khz / div_ref / div_out; |
| |
| if (pll_n < 4095) |
| u16tmp = pll_n - 1024; |
| else if (pll_n < 6143) |
| u16tmp = pll_n + 1024; |
| else |
| u16tmp = pll_n + 3072; |
| |
| buf[0] = (u16tmp >> 8) & 0x3f; |
| buf[1] = (u16tmp >> 0) & 0xff; |
| buf[2] = div_ref - 8; |
| ret = regmap_bulk_write(dev->regmap, 0x01, buf, 3); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&dev->client->dev, |
| "frequency=%u offset=%d f_vco_khz=%u pll_n=%u div_ref=%u div_out=%u\n", |
| dev->frequency_khz, dev->frequency_khz - c->frequency, |
| f_vco_khz, pll_n, div_ref, div_out); |
| |
| ret = m88ts2022_cmd(dev, 0x10, 5, 0x15, 0x40, 0x00, NULL); |
| if (ret) |
| goto err; |
| |
| ret = regmap_read(dev->regmap, 0x14, &utmp); |
| if (ret) |
| goto err; |
| |
| utmp &= 0x7f; |
| if (utmp < 64) { |
| ret = regmap_update_bits(dev->regmap, 0x10, 0x80, 0x80); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0x11, 0x6f); |
| if (ret) |
| goto err; |
| |
| ret = m88ts2022_cmd(dev, 0x10, 5, 0x15, 0x40, 0x00, NULL); |
| if (ret) |
| goto err; |
| } |
| |
| ret = regmap_read(dev->regmap, 0x14, &utmp); |
| if (ret) |
| goto err; |
| |
| utmp &= 0x1f; |
| if (utmp > 19) { |
| ret = regmap_update_bits(dev->regmap, 0x10, 0x02, 0x00); |
| if (ret) |
| goto err; |
| } |
| |
| ret = m88ts2022_cmd(dev, 0x08, 5, 0x3c, 0xff, 0x00, NULL); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0x25, 0x00); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0x27, 0x70); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0x41, 0x09); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0x08, 0x0b); |
| if (ret) |
| goto err; |
| |
| /* filters */ |
| gdiv28 = DIV_ROUND_CLOSEST(f_ref_khz * 1694U, 1000000U); |
| |
| ret = regmap_write(dev->regmap, 0x04, gdiv28); |
| if (ret) |
| goto err; |
| |
| ret = m88ts2022_cmd(dev, 0x04, 2, 0x26, 0xff, 0x00, &u8tmp); |
| if (ret) |
| goto err; |
| |
| cap_code = u8tmp & 0x3f; |
| |
| ret = regmap_write(dev->regmap, 0x41, 0x0d); |
| if (ret) |
| goto err; |
| |
| ret = m88ts2022_cmd(dev, 0x04, 2, 0x26, 0xff, 0x00, &u8tmp); |
| if (ret) |
| goto err; |
| |
| u8tmp &= 0x3f; |
| cap_code = (cap_code + u8tmp) / 2; |
| gdiv28 = gdiv28 * 207 / (cap_code * 2 + 151); |
| div_max = gdiv28 * 135 / 100; |
| div_min = gdiv28 * 78 / 100; |
| div_max = clamp_val(div_max, 0U, 63U); |
| |
| f_3db_hz = mult_frac(c->symbol_rate, 135, 200); |
| f_3db_hz += 2000000U + (frequency_offset_khz * 1000U); |
| f_3db_hz = clamp(f_3db_hz, 7000000U, 40000000U); |
| |
| #define LPF_COEFF 3200U |
| lpf_gm = DIV_ROUND_CLOSEST(f_3db_hz * gdiv28, LPF_COEFF * f_ref_khz); |
| lpf_gm = clamp_val(lpf_gm, 1U, 23U); |
| |
| lpf_mxdiv = DIV_ROUND_CLOSEST(lpf_gm * LPF_COEFF * f_ref_khz, f_3db_hz); |
| if (lpf_mxdiv < div_min) |
| lpf_mxdiv = DIV_ROUND_CLOSEST(++lpf_gm * LPF_COEFF * f_ref_khz, f_3db_hz); |
| lpf_mxdiv = clamp_val(lpf_mxdiv, 0U, div_max); |
| |
| ret = regmap_write(dev->regmap, 0x04, lpf_mxdiv); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0x06, lpf_gm); |
| if (ret) |
| goto err; |
| |
| ret = m88ts2022_cmd(dev, 0x04, 2, 0x26, 0xff, 0x00, &u8tmp); |
| if (ret) |
| goto err; |
| |
| cap_code = u8tmp & 0x3f; |
| |
| ret = regmap_write(dev->regmap, 0x41, 0x09); |
| if (ret) |
| goto err; |
| |
| ret = m88ts2022_cmd(dev, 0x04, 2, 0x26, 0xff, 0x00, &u8tmp); |
| if (ret) |
| goto err; |
| |
| u8tmp &= 0x3f; |
| cap_code = (cap_code + u8tmp) / 2; |
| |
| u8tmp = cap_code | 0x80; |
| ret = regmap_write(dev->regmap, 0x25, u8tmp); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0x27, 0x30); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0x08, 0x09); |
| if (ret) |
| goto err; |
| |
| ret = m88ts2022_cmd(dev, 0x01, 20, 0x21, 0xff, 0x00, NULL); |
| if (ret) |
| goto err; |
| err: |
| if (ret) |
| dev_dbg(&dev->client->dev, "failed=%d\n", ret); |
| |
| return ret; |
| } |
| |
| static int m88ts2022_init(struct dvb_frontend *fe) |
| { |
| struct m88ts2022_dev *dev = fe->tuner_priv; |
| int ret, i; |
| u8 u8tmp; |
| static const struct m88ts2022_reg_val reg_vals[] = { |
| {0x7d, 0x9d}, |
| {0x7c, 0x9a}, |
| {0x7a, 0x76}, |
| {0x3b, 0x01}, |
| {0x63, 0x88}, |
| {0x61, 0x85}, |
| {0x22, 0x30}, |
| {0x30, 0x40}, |
| {0x20, 0x23}, |
| {0x24, 0x02}, |
| {0x12, 0xa0}, |
| }; |
| |
| dev_dbg(&dev->client->dev, "\n"); |
| |
| ret = regmap_write(dev->regmap, 0x00, 0x01); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0x00, 0x03); |
| if (ret) |
| goto err; |
| |
| switch (dev->cfg.clock_out) { |
| case M88TS2022_CLOCK_OUT_DISABLED: |
| u8tmp = 0x60; |
| break; |
| case M88TS2022_CLOCK_OUT_ENABLED: |
| u8tmp = 0x70; |
| ret = regmap_write(dev->regmap, 0x05, dev->cfg.clock_out_div); |
| if (ret) |
| goto err; |
| break; |
| case M88TS2022_CLOCK_OUT_ENABLED_XTALOUT: |
| u8tmp = 0x6c; |
| break; |
| default: |
| goto err; |
| } |
| |
| ret = regmap_write(dev->regmap, 0x42, u8tmp); |
| if (ret) |
| goto err; |
| |
| if (dev->cfg.loop_through) |
| u8tmp = 0xec; |
| else |
| u8tmp = 0x6c; |
| |
| ret = regmap_write(dev->regmap, 0x62, u8tmp); |
| if (ret) |
| goto err; |
| |
| for (i = 0; i < ARRAY_SIZE(reg_vals); i++) { |
| ret = regmap_write(dev->regmap, reg_vals[i].reg, reg_vals[i].val); |
| if (ret) |
| goto err; |
| } |
| err: |
| if (ret) |
| dev_dbg(&dev->client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int m88ts2022_sleep(struct dvb_frontend *fe) |
| { |
| struct m88ts2022_dev *dev = fe->tuner_priv; |
| int ret; |
| |
| dev_dbg(&dev->client->dev, "\n"); |
| |
| ret = regmap_write(dev->regmap, 0x00, 0x00); |
| if (ret) |
| goto err; |
| err: |
| if (ret) |
| dev_dbg(&dev->client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int m88ts2022_get_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct m88ts2022_dev *dev = fe->tuner_priv; |
| |
| dev_dbg(&dev->client->dev, "\n"); |
| |
| *frequency = dev->frequency_khz; |
| return 0; |
| } |
| |
| static int m88ts2022_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct m88ts2022_dev *dev = fe->tuner_priv; |
| |
| dev_dbg(&dev->client->dev, "\n"); |
| |
| *frequency = 0; /* Zero-IF */ |
| return 0; |
| } |
| |
| static int m88ts2022_get_rf_strength(struct dvb_frontend *fe, u16 *strength) |
| { |
| struct m88ts2022_dev *dev = fe->tuner_priv; |
| int ret; |
| u16 gain, u16tmp; |
| unsigned int utmp, gain1, gain2, gain3; |
| |
| ret = regmap_read(dev->regmap, 0x3d, &utmp); |
| if (ret) |
| goto err; |
| |
| gain1 = (utmp >> 0) & 0x1f; |
| gain1 = clamp(gain1, 0U, 15U); |
| |
| ret = regmap_read(dev->regmap, 0x21, &utmp); |
| if (ret) |
| goto err; |
| |
| gain2 = (utmp >> 0) & 0x1f; |
| gain2 = clamp(gain2, 2U, 16U); |
| |
| ret = regmap_read(dev->regmap, 0x66, &utmp); |
| if (ret) |
| goto err; |
| |
| gain3 = (utmp >> 3) & 0x07; |
| gain3 = clamp(gain3, 0U, 6U); |
| |
| gain = gain1 * 265 + gain2 * 338 + gain3 * 285; |
| |
| /* scale value to 0x0000-0xffff */ |
| u16tmp = (0xffff - gain); |
| u16tmp = clamp_val(u16tmp, 59000U, 61500U); |
| |
| *strength = (u16tmp - 59000) * 0xffff / (61500 - 59000); |
| err: |
| if (ret) |
| dev_dbg(&dev->client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static const struct dvb_tuner_ops m88ts2022_tuner_ops = { |
| .info = { |
| .name = "Montage M88TS2022", |
| .frequency_min = 950000, |
| .frequency_max = 2150000, |
| }, |
| |
| .init = m88ts2022_init, |
| .sleep = m88ts2022_sleep, |
| .set_params = m88ts2022_set_params, |
| |
| .get_frequency = m88ts2022_get_frequency, |
| .get_if_frequency = m88ts2022_get_if_frequency, |
| .get_rf_strength = m88ts2022_get_rf_strength, |
| }; |
| |
| static int m88ts2022_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct m88ts2022_config *cfg = client->dev.platform_data; |
| struct dvb_frontend *fe = cfg->fe; |
| struct m88ts2022_dev *dev; |
| int ret; |
| u8 u8tmp; |
| unsigned int utmp; |
| static const struct regmap_config regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| }; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) { |
| ret = -ENOMEM; |
| dev_err(&client->dev, "kzalloc() failed\n"); |
| goto err; |
| } |
| |
| memcpy(&dev->cfg, cfg, sizeof(struct m88ts2022_config)); |
| dev->client = client; |
| dev->regmap = devm_regmap_init_i2c(client, ®map_config); |
| if (IS_ERR(dev->regmap)) { |
| ret = PTR_ERR(dev->regmap); |
| goto err; |
| } |
| |
| /* check if the tuner is there */ |
| ret = regmap_read(dev->regmap, 0x00, &utmp); |
| if (ret) |
| goto err; |
| |
| if ((utmp & 0x03) == 0x00) { |
| ret = regmap_write(dev->regmap, 0x00, 0x01); |
| if (ret) |
| goto err; |
| |
| usleep_range(2000, 50000); |
| } |
| |
| ret = regmap_write(dev->regmap, 0x00, 0x03); |
| if (ret) |
| goto err; |
| |
| usleep_range(2000, 50000); |
| |
| ret = regmap_read(dev->regmap, 0x00, &utmp); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&dev->client->dev, "chip_id=%02x\n", utmp); |
| |
| switch (utmp) { |
| case 0xc3: |
| case 0x83: |
| break; |
| default: |
| goto err; |
| } |
| |
| switch (dev->cfg.clock_out) { |
| case M88TS2022_CLOCK_OUT_DISABLED: |
| u8tmp = 0x60; |
| break; |
| case M88TS2022_CLOCK_OUT_ENABLED: |
| u8tmp = 0x70; |
| ret = regmap_write(dev->regmap, 0x05, dev->cfg.clock_out_div); |
| if (ret) |
| goto err; |
| break; |
| case M88TS2022_CLOCK_OUT_ENABLED_XTALOUT: |
| u8tmp = 0x6c; |
| break; |
| default: |
| goto err; |
| } |
| |
| ret = regmap_write(dev->regmap, 0x42, u8tmp); |
| if (ret) |
| goto err; |
| |
| if (dev->cfg.loop_through) |
| u8tmp = 0xec; |
| else |
| u8tmp = 0x6c; |
| |
| ret = regmap_write(dev->regmap, 0x62, u8tmp); |
| if (ret) |
| goto err; |
| |
| /* sleep */ |
| ret = regmap_write(dev->regmap, 0x00, 0x00); |
| if (ret) |
| goto err; |
| |
| dev_info(&dev->client->dev, "Montage M88TS2022 successfully identified\n"); |
| |
| fe->tuner_priv = dev; |
| memcpy(&fe->ops.tuner_ops, &m88ts2022_tuner_ops, |
| sizeof(struct dvb_tuner_ops)); |
| |
| i2c_set_clientdata(client, dev); |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| kfree(dev); |
| return ret; |
| } |
| |
| static int m88ts2022_remove(struct i2c_client *client) |
| { |
| struct m88ts2022_dev *dev = i2c_get_clientdata(client); |
| struct dvb_frontend *fe = dev->cfg.fe; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops)); |
| fe->tuner_priv = NULL; |
| kfree(dev); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id m88ts2022_id[] = { |
| {"m88ts2022", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, m88ts2022_id); |
| |
| static struct i2c_driver m88ts2022_driver = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "m88ts2022", |
| }, |
| .probe = m88ts2022_probe, |
| .remove = m88ts2022_remove, |
| .id_table = m88ts2022_id, |
| }; |
| |
| module_i2c_driver(m88ts2022_driver); |
| |
| MODULE_DESCRIPTION("Montage M88TS2022 silicon tuner driver"); |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_LICENSE("GPL"); |