| Community AR9170 Linux firmware |
| ----------------------- |
| |
| This is the firmware for the Atheros ar9170 802.11n devices. |
| |
| To build the firmware you will need an SH-2 toolchain. |
| You can build your own toolchain: |
| |
| make -C toolchain |
| |
| but be aware that this will take some time and requires |
| about 1.2 GiB disk space. |
| |
| The resulting firmware, carl9170.fw, can be used only |
| with the carl9170 Linux driver. |
| |
| After getting a toolchain, you will need to get more |
| tools & libs: |
| |
| * gcc 4.4+ |
| |
| * gperf, bison/flex |
| |
| * cmake 2.8.0+ |
| |
| * libusb 1.0+ |
| |
| * SDL SDK 1.2.13+ |
| |
| afterwards, simply execute: |
| |
| autogen.sh |
| |
| to start the configuration and build process. |
| |
| if you want to "install" your own firmware, you can either |
| do this manually, or by executing: |
| |
| autogen.sh install |
| |
| This will place a copy with the right filename [adds API rev] |
| into /lib/firmware/[the default path on most Distributions]. |
| |