cpu/ppc4xx/bedbug_405.c - uboot/windcharger - Git at Google

 /*
  * Bedbug Functions specific to the PPC405 chip
  */

 #include <common.h>
 #include <command.h>
 #include <linux/ctype.h>
 #include <bedbug/type.h>
 #include <bedbug/bedbug.h>
 #include <bedbug/regs.h>
 #include <bedbug/ppc.h>

 #if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) && defined(CONFIG_4xx)

 #define MAX_BREAK_POINTS 4

 extern CPU_DEBUG_CTX bug_ctx;

 void bedbug405_init __P ((void));
 void bedbug405_do_break __P ((cmd_tbl_t *, int, int, char *[]));
 void bedbug405_break_isr __P ((struct pt_regs *));
 int bedbug405_find_empty __P ((void));
 int bedbug405_set __P ((int, unsigned long));
 int bedbug405_clear __P ((int));


 /* ======================================================================
  * Initialize the global bug_ctx structure for the AMCC PPC405.	Clear all
  * of the breakpoints.
  * ====================================================================== */

 void bedbug405_init (void)
 {
 	int i;

 	/* -------------------------------------------------- */

 	bug_ctx.hw_debug_enabled = 0;
 	bug_ctx.stopped = 0;
 	bug_ctx.current_bp = 0;
 	bug_ctx.regs = NULL;

 	bug_ctx.do_break = bedbug405_do_break;
 	bug_ctx.break_isr = bedbug405_break_isr;
 	bug_ctx.find_empty = bedbug405_find_empty;
 	bug_ctx.set = bedbug405_set;
 	bug_ctx.clear = bedbug405_clear;

 	for (i = 1; i <= MAX_BREAK_POINTS; ++i)
 		(*bug_ctx.clear) (i);

 	puts ("BEDBUG:ready\n");
 	return;
 }	/* bedbug_init_breakpoints */


 /* ======================================================================
  * Set/clear/show one of the hardware breakpoints for the 405.	The "off"
  * string will disable a specific breakpoint.  The "show" string will
  * display the current breakpoints.  Otherwise an address will set a
  * breakpoint at that address.	Setting a breakpoint uses the CPU-specific
  * set routine which will assign a breakpoint number.
  * ====================================================================== */

 void bedbug405_do_break (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	long addr = 0;		/* Address to break at  */
 	int which_bp;		/* Breakpoint number    */

 	/* -------------------------------------------------- */

 	if (argc < 2) {
 		printf ("Usage:\n%s\n", cmdtp->usage);
 		return;
 	}

 	/* Turn off a breakpoint */

 	if (strcmp (argv[1], "off") == 0) {
 		if (bug_ctx.hw_debug_enabled == 0) {
 			printf ("No breakpoints enabled\n");
 			return;
 		}

 		which_bp = simple_strtoul (argv[2], NULL, 10);

 		if (bug_ctx.clear)
 			(*bug_ctx.clear) (which_bp);

 		printf ("Breakpoint %d removed\n", which_bp);
 		return;
 	}

 	/* Show a list of breakpoints */

 	if (strcmp (argv[1], "show") == 0) {
 		for (which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp) {

 			switch (which_bp) {
 			case 1:
 				addr = GET_IAC1 ();
 				break;
 			case 2:
 				addr = GET_IAC2 ();
 				break;
 			case 3:
 				addr = GET_IAC3 ();
 				break;
 			case 4:
 				addr = GET_IAC4 ();
 				break;
 			}

 			printf ("Breakpoint [%d]: ", which_bp);
 			if (addr == 0)
 				printf ("NOT SET\n");
 			else
 				disppc ((unsigned char *) addr, 0, 1, bedbug_puts,
 						F_RADHEX);
 		}
 		return;
 	}

 	/* Set a breakpoint at the address */

 	if (!isdigit (argv[1][0])) {
 		printf ("Usage:\n%s\n", cmdtp->usage);
 		return;
 	}

 	addr = simple_strtoul (argv[1], NULL, 16) & 0xfffffffc;

 	if ((bug_ctx.set) && (which_bp = (*bug_ctx.set) (0, addr)) > 0) {
 		printf ("Breakpoint [%d]: ", which_bp);
 		disppc ((unsigned char *) addr, 0, 1, bedbug_puts, F_RADHEX);
 	}

 	return;
 }	/* bedbug405_do_break */


 /* ======================================================================
  * Handle a breakpoint.	 First determine which breakpoint was hit by
  * looking at the DeBug Status Register (DBSR), clear the breakpoint
  * and enter a mini main loop.	Stay in the loop until the stopped flag
  * in the debug context is cleared.
  * ====================================================================== */

 void bedbug405_break_isr (struct pt_regs *regs)
 {
 	unsigned long dbsr_val;		/* Value of the DBSR    */
 	unsigned long addr = 0;		/* Address stopped at   */

 	/* -------------------------------------------------- */

 	dbsr_val = GET_DBSR ();

 	if (dbsr_val & DBSR_IA1) {
 		bug_ctx.current_bp = 1;
 		addr = GET_IAC1 ();
 		SET_DBSR (DBSR_IA1);	/* Write a 1 to clear */
 	} else if (dbsr_val & DBSR_IA2) {
 		bug_ctx.current_bp = 2;
 		addr = GET_IAC2 ();
 		SET_DBSR (DBSR_IA2);	/* Write a 1 to clear */
 	} else if (dbsr_val & DBSR_IA3) {
 		bug_ctx.current_bp = 3;
 		addr = GET_IAC3 ();
 		SET_DBSR (DBSR_IA3);	/* Write a 1 to clear */
 	} else if (dbsr_val & DBSR_IA4) {
 		bug_ctx.current_bp = 4;
 		addr = GET_IAC4 ();
 		SET_DBSR (DBSR_IA4);	/* Write a 1 to clear */
 	}

 	bedbug_main_loop (addr, regs);
 	return;
 }	/* bedbug405_break_isr */


 /* ======================================================================
  * Look through all of the hardware breakpoints available to see if one
  * is unused.
  * ====================================================================== */

 int bedbug405_find_empty (void)
 {
 	/* -------------------------------------------------- */

 	if (GET_IAC1 () == 0)
 		return 1;

 	if (GET_IAC2 () == 0)
 		return 2;

 	if (GET_IAC3 () == 0)
 		return 3;

 	if (GET_IAC4 () == 0)
 		return 4;

 	return 0;
 }	/* bedbug405_find_empty */


 /* ======================================================================
  * Set a breakpoint.  If 'which_bp' is zero then find an unused breakpoint
  * number, otherwise reassign the given breakpoint.  If hardware debugging
  * is not enabled, then turn it on via the MSR and DBCR0.  Set the break
  * address in the appropriate IACx register and enable proper address
  * beakpoint in DBCR0.
  * ====================================================================== */

 int bedbug405_set (int which_bp, unsigned long addr)
 {
 	/* -------------------------------------------------- */

 	/* Only look if which_bp == 0, else use which_bp */
 	if ((bug_ctx.find_empty) && (!which_bp) &&
 		(which_bp = (*bug_ctx.find_empty) ()) == 0) {
 		printf ("All breakpoints in use\n");
 		return 0;
 	}

 	if (which_bp < 1 || which_bp > MAX_BREAK_POINTS) {
 		printf ("Invalid break point # %d\n", which_bp);
 		return 0;
 	}

 	if (!bug_ctx.hw_debug_enabled) {
 		SET_MSR (GET_MSR () | 0x200);	/* set MSR[ DE ] */
 		SET_DBCR0 (GET_DBCR0 () | DBCR0_IDM);
 		bug_ctx.hw_debug_enabled = 1;
 	}

 	switch (which_bp) {
 	case 1:
 		SET_IAC1 (addr);
 		SET_DBCR0 (GET_DBCR0 () | DBCR0_IA1);
 		break;

 	case 2:
 		SET_IAC2 (addr);
 		SET_DBCR0 (GET_DBCR0 () | DBCR0_IA2);
 		break;

 	case 3:
 		SET_IAC3 (addr);
 		SET_DBCR0 (GET_DBCR0 () | DBCR0_IA3);
 		break;

 	case 4:
 		SET_IAC4 (addr);
 		SET_DBCR0 (GET_DBCR0 () | DBCR0_IA4);
 		break;
 	}

 	return which_bp;
 }	/* bedbug405_set */


 /* ======================================================================
  * Disable a specific breakoint by setting the appropriate IACx register
  * to zero and claring the instruction address breakpoint in DBCR0.
  * ====================================================================== */

 int bedbug405_clear (int which_bp)
 {
 	/* -------------------------------------------------- */

 	if (which_bp < 1 || which_bp > MAX_BREAK_POINTS) {
 		printf ("Invalid break point # (%d)\n", which_bp);
 		return -1;
 	}

 	switch (which_bp) {
 	case 1:
 		SET_IAC1 (0);
 		SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA1);
 		break;

 	case 2:
 		SET_IAC2 (0);
 		SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA2);
 		break;

 	case 3:
 		SET_IAC3 (0);
 		SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA3);
 		break;

 	case 4:
 		SET_IAC4 (0);
 		SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA4);
 		break;
 	}

 	return 0;
 }	/* bedbug405_clear */


 /* ====================================================================== */
 #endif
	/*
	* Bedbug Functions specific to the PPC405 chip
	*/

	#include <common.h>
	#include <command.h>
	#include <linux/ctype.h>
	#include <bedbug/type.h>
	#include <bedbug/bedbug.h>
	#include <bedbug/regs.h>
	#include <bedbug/ppc.h>

	#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) && defined(CONFIG_4xx)

	#define MAX_BREAK_POINTS 4

	extern CPU_DEBUG_CTX bug_ctx;

	void bedbug405_init __P ((void));
	void bedbug405_do_break __P ((cmd_tbl_t , int, int, char []));
	void bedbug405_break_isr __P ((struct pt_regs *));
	int bedbug405_find_empty __P ((void));
	int bedbug405_set __P ((int, unsigned long));
	int bedbug405_clear __P ((int));


	/* ======================================================================
	* Initialize the global bug_ctx structure for the AMCC PPC405. Clear all
	* of the breakpoints.
	* ====================================================================== */

	void bedbug405_init (void)
	{
	int i;

	/* -------------------------------------------------- */

	bug_ctx.hw_debug_enabled = 0;
	bug_ctx.stopped = 0;
	bug_ctx.current_bp = 0;
	bug_ctx.regs = NULL;

	bug_ctx.do_break = bedbug405_do_break;
	bug_ctx.break_isr = bedbug405_break_isr;
	bug_ctx.find_empty = bedbug405_find_empty;
	bug_ctx.set = bedbug405_set;
	bug_ctx.clear = bedbug405_clear;

	for (i = 1; i <= MAX_BREAK_POINTS; ++i)
	(*bug_ctx.clear) (i);

	puts ("BEDBUG:ready\n");
	return;
	} /* bedbug_init_breakpoints */



	/* ======================================================================
	* Set/clear/show one of the hardware breakpoints for the 405. The "off"
	* string will disable a specific breakpoint. The "show" string will
	* display the current breakpoints. Otherwise an address will set a
	* breakpoint at that address. Setting a breakpoint uses the CPU-specific
	* set routine which will assign a breakpoint number.
	* ====================================================================== */

	void bedbug405_do_break (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
	{
	long addr = 0; /* Address to break at */
	int which_bp; /* Breakpoint number */

	/* -------------------------------------------------- */

	if (argc < 2) {
	printf ("Usage:\n%s\n", cmdtp->usage);
	return;
	}

	/* Turn off a breakpoint */

	if (strcmp (argv[1], "off") == 0) {
	if (bug_ctx.hw_debug_enabled == 0) {
	printf ("No breakpoints enabled\n");
	return;
	}

	which_bp = simple_strtoul (argv[2], NULL, 10);

	if (bug_ctx.clear)
	(*bug_ctx.clear) (which_bp);

	printf ("Breakpoint %d removed\n", which_bp);
	return;
	}

	/* Show a list of breakpoints */

	if (strcmp (argv[1], "show") == 0) {
	for (which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp) {

	switch (which_bp) {
	case 1:
	addr = GET_IAC1 ();
	break;
	case 2:
	addr = GET_IAC2 ();
	break;
	case 3:
	addr = GET_IAC3 ();
	break;
	case 4:
	addr = GET_IAC4 ();
	break;
	}

	printf ("Breakpoint [%d]: ", which_bp);
	if (addr == 0)
	printf ("NOT SET\n");
	else
	disppc ((unsigned char *) addr, 0, 1, bedbug_puts,
	F_RADHEX);
	}
	return;
	}

	/* Set a breakpoint at the address */

	if (!isdigit (argv[1][0])) {
	printf ("Usage:\n%s\n", cmdtp->usage);
	return;
	}

	addr = simple_strtoul (argv[1], NULL, 16) & 0xfffffffc;

	if ((bug_ctx.set) && (which_bp = (*bug_ctx.set) (0, addr)) > 0) {
	printf ("Breakpoint [%d]: ", which_bp);
	disppc ((unsigned char *) addr, 0, 1, bedbug_puts, F_RADHEX);
	}

	return;
	} /* bedbug405_do_break */



	/* ======================================================================
	* Handle a breakpoint. First determine which breakpoint was hit by
	* looking at the DeBug Status Register (DBSR), clear the breakpoint
	* and enter a mini main loop. Stay in the loop until the stopped flag
	* in the debug context is cleared.
	* ====================================================================== */

	void bedbug405_break_isr (struct pt_regs *regs)
	{
	unsigned long dbsr_val; /* Value of the DBSR */
	unsigned long addr = 0; /* Address stopped at */

	/* -------------------------------------------------- */

	dbsr_val = GET_DBSR ();

	if (dbsr_val & DBSR_IA1) {
	bug_ctx.current_bp = 1;
	addr = GET_IAC1 ();
	SET_DBSR (DBSR_IA1); /* Write a 1 to clear */
	} else if (dbsr_val & DBSR_IA2) {
	bug_ctx.current_bp = 2;
	addr = GET_IAC2 ();
	SET_DBSR (DBSR_IA2); /* Write a 1 to clear */
	} else if (dbsr_val & DBSR_IA3) {
	bug_ctx.current_bp = 3;
	addr = GET_IAC3 ();
	SET_DBSR (DBSR_IA3); /* Write a 1 to clear */
	} else if (dbsr_val & DBSR_IA4) {
	bug_ctx.current_bp = 4;
	addr = GET_IAC4 ();
	SET_DBSR (DBSR_IA4); /* Write a 1 to clear */
	}

	bedbug_main_loop (addr, regs);
	return;
	} /* bedbug405_break_isr */



	/* ======================================================================
	* Look through all of the hardware breakpoints available to see if one
	* is unused.
	* ====================================================================== */

	int bedbug405_find_empty (void)
	{
	/* -------------------------------------------------- */

	if (GET_IAC1 () == 0)
	return 1;

	if (GET_IAC2 () == 0)
	return 2;

	if (GET_IAC3 () == 0)
	return 3;

	if (GET_IAC4 () == 0)
	return 4;

	return 0;
	} /* bedbug405_find_empty */



	/* ======================================================================
	* Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
	* number, otherwise reassign the given breakpoint. If hardware debugging
	* is not enabled, then turn it on via the MSR and DBCR0. Set the break
	* address in the appropriate IACx register and enable proper address
	* beakpoint in DBCR0.
	* ====================================================================== */

	int bedbug405_set (int which_bp, unsigned long addr)
	{
	/* -------------------------------------------------- */

	/* Only look if which_bp == 0, else use which_bp */
	if ((bug_ctx.find_empty) && (!which_bp) &&
	(which_bp = (*bug_ctx.find_empty) ()) == 0) {
	printf ("All breakpoints in use\n");
	return 0;
	}

	if (which_bp < 1 \|\| which_bp > MAX_BREAK_POINTS) {
	printf ("Invalid break point # %d\n", which_bp);
	return 0;
	}

	if (!bug_ctx.hw_debug_enabled) {
	SET_MSR (GET_MSR () \| 0x200); /* set MSR[ DE ] */
	SET_DBCR0 (GET_DBCR0 () \| DBCR0_IDM);
	bug_ctx.hw_debug_enabled = 1;
	}

	switch (which_bp) {
	case 1:
	SET_IAC1 (addr);
	SET_DBCR0 (GET_DBCR0 () \| DBCR0_IA1);
	break;

	case 2:
	SET_IAC2 (addr);
	SET_DBCR0 (GET_DBCR0 () \| DBCR0_IA2);
	break;

	case 3:
	SET_IAC3 (addr);
	SET_DBCR0 (GET_DBCR0 () \| DBCR0_IA3);
	break;

	case 4:
	SET_IAC4 (addr);
	SET_DBCR0 (GET_DBCR0 () \| DBCR0_IA4);
	break;
	}

	return which_bp;
	} /* bedbug405_set */



	/* ======================================================================
	* Disable a specific breakoint by setting the appropriate IACx register
	* to zero and claring the instruction address breakpoint in DBCR0.
	* ====================================================================== */

	int bedbug405_clear (int which_bp)
	{
	/* -------------------------------------------------- */

	if (which_bp < 1 \|\| which_bp > MAX_BREAK_POINTS) {
	printf ("Invalid break point # (%d)\n", which_bp);
	return -1;
	}

	switch (which_bp) {
	case 1:
	SET_IAC1 (0);
	SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA1);
	break;

	case 2:
	SET_IAC2 (0);
	SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA2);
	break;

	case 3:
	SET_IAC3 (0);
	SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA3);
	break;

	case 4:
	SET_IAC4 (0);
	SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA4);
	break;
	}

	return 0;
	} /* bedbug405_clear */


	/* ====================================================================== */
	#endif