include/configs/voiceblue.h - uboot/windcharger - Git at Google

 /*
  * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
  *
  * Configuation settings for the TI OMAP VoiceBlue board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include <configs/omap1510.h>

 /*
  * High Level Configuration Options
  * (easy to change)
  */
 #define CONFIG_ARM925T	1		/* This is an arm925t CPU */
 #define CONFIG_OMAP	1		/* in a TI OMAP core */
 #define CONFIG_OMAP1510 1		/* which is in a 5910 */

 /* Input clock of PLL */
 #define CONFIG_SYS_CLK_FREQ	150000000	/* 150MHz input clock */
 #define CONFIG_XTAL_FREQ	12000000

 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */

 #define CONFIG_MISC_INIT_R		/* There is nothing to really init */
 #define BOARD_LATE_INIT			/* but we flash the LEDs here */

 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1

 /*
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1		0x10000000	/* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	SZ_64M

 #define PHYS_FLASH_1		0x00000000	/* Flash Bank #1 */
 #define PHYS_FLASH_2		0x0c000000

 #define CFG_LOAD_ADDR		PHYS_SDRAM_1 + 0x400000	/* default load address */

 /*
  * FLASH organization
  */
 #define CFG_FLASH_CFI			/* Flash is CFI conformant */
 #define CFG_FLASH_CFI_DRIVER		/* Use the common driver */
 #define CFG_MAX_FLASH_BANKS	1
 #ifdef VOICEBLUE_SMALL_FLASH
 #define CFG_FLASH_BANKS_LIST	{ PHYS_FLASH_2 }
 #else
 #define CFG_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }
 #endif

 /* FIXME: Does not work on AMD flash */
 /* #define CFG_FLASH_USE_BUFFER_WRITE 1 */	/* use buffered writes (20x faster) */
 #define CFG_MAX_FLASH_SECT	512	/* max # of sectors on one chip */

 #define CFG_MONITOR_BASE	PHYS_FLASH_1
 #define CFG_MONITOR_LEN		SZ_128K

 /*
  * Environment settings
  */
 #ifdef VOICEBLUE_SMALL_FLASH
 #define CFG_ENV_IS_NOWHERE
 #define CFG_ENV_SIZE		SZ_1K
 #else
 #define CFG_ENV_IS_IN_FLASH
 #define CFG_ENV_ADDR		(PHYS_FLASH_1 + CFG_MONITOR_LEN)
 #define CFG_ENV_SIZE		SZ_8K
 #define CFG_ENV_SECT_SIZE	SZ_64K
 #define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE

 #define CONFIG_ENV_OVERWRITE

 #define CFG_JFFS_CUSTOM_PART	/* see board/voiceblue/jffs2parts.c */
 #endif

 /*
  * Size of malloc() pool and stack
  */
 #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 #ifdef VOICEBLUE_SMALL_FLASH
 #define CFG_MALLOC_LEN		(SZ_64K - CFG_GBL_DATA_SIZE)
 #define CONFIG_STACKSIZE	SZ_8K
 #else
 #define CFG_MALLOC_LEN		SZ_4M
 #define CONFIG_STACKSIZE	SZ_1M
 #endif

 /*
  * Hardware drivers
  */
 #define CONFIG_DRIVER_SMC91111
 #define CONFIG_SMC91111_BASE	0x08000300

 /*
  * NS16550 Configuration
  */
 #define CFG_NS16550
 #define CFG_NS16550_SERIAL
 #define CFG_NS16550_REG_SIZE	(-4)
 #define CFG_NS16550_CLK		(CONFIG_XTAL_FREQ)	/* can be 12M/32Khz or 48Mhz  */
 #define CFG_NS16550_COM1	OMAP1510_UART1_BASE	/* uart1 */

 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #ifdef VOICEBLUE_SMALL_FLASH
 #define CONFIG_COMMANDS		(CFG_CMD_BDI    |	\
 				 CFG_CMD_LOADB  |	\
 				 CFG_CMD_IMI    |	\
 				 CFG_CMD_FLASH  |	\
 				 CFG_CMD_MEMORY |	\
 				 CFG_CMD_NET    |	\
 				 CFG_CMD_BOOTD  |	\
 				 CFG_CMD_DHCP   |	\
 				 CFG_CMD_PING   |	\
 				 CFG_CMD_RUN)
 #else
 #define CONFIG_COMMANDS		(CFG_CMD_BDI    |	\
 				 CFG_CMD_LOADB  |	\
 				 CFG_CMD_IMI    |	\
 				 CFG_CMD_FLASH  |	\
 				 CFG_CMD_MEMORY |	\
 				 CFG_CMD_NET    |	\
 				 CFG_CMD_ENV    |	\
 				 CFG_CMD_BOOTD  |	\
 				 CFG_CMD_DHCP   |	\
 				 CFG_CMD_PING   |	\
 				 CFG_CMD_RUN    |	\
 				 CFG_CMD_JFFS2)
 #endif

 #define CONFIG_BOOTP_MASK	CONFIG_BOOTP_DEFAULT
 #define CONFIG_LOOPW

 #ifdef VOICEBLUE_SMALL_FLASH
 #define CONFIG_BOOTDELAY	0
 #undef  CONFIG_BOOTARGS		/* the preboot command will set bootargs*/
 #define CFG_AUTOLOAD		"n"	/* no autoload */
 #define CONFIG_PREBOOT		"run setup"
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"setup=setenv bootargs console=ttyS0,${baudrate} "	\
 		"root=/dev/nfs ip=dhcp\0"			\
 	"update=erase c000000 c03ffff; "			\
 		"cp.b 10400000 c000000 ${filesize}\0"
 #else
 #define CONFIG_BOOTDELAY	3
 #undef  CONFIG_BOOTARGS		/* boot command will set bootargs */
 #define CFG_AUTOLOAD		"n"	/* no autoload */
 #define CONFIG_BOOTCOMMAND	"run nboot"
 #define CONFIG_PREBOOT		"run setup"
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"ospart=0\0"						\
 	"swapos=no\0"						\
 	"setpart="						\
 	"if test $swapos = yes; then "				\
 		"if test $ospart -eq 0; then chpart 4; else chpart 3; fi; "\
 		"setenv swapos no; saveenv; "			\
 	"else "							\
 		"if test $ospart -eq 0; then chpart 3; else chpart 4; fi; "\
 	"fi\0"							\
 	"setup=setenv bootargs console=ttyS0,$baudrate "	\
 		"mtdparts=$mtdparts\0"				\
 	"nfsargs=run setpart; setenv bootargs $bootargs "	\
 		"root=/dev/nfs ip=dhcp\0"			\
 	"flashargs=run setpart; setenv bootargs $bootargs "	\
 		"root=/dev/mtdblock$partition ro "		\
 		"rootfstype=jffs2\0"				\
 	"nboot=run nfsargs; bootp; tftp; bootm\0"		\
 	"fboot=run flashargs; fsload /boot/uImage; bootm\0"
 #endif

 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>

 /*
  * Miscellaneous configurable options
  */
 #ifndef VOICEBLUE_SMALL_FLASH
 #define CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2	"> "
 #define CONFIG_AUTO_COMPLETE
 #endif
 #define CFG_LONGHELP				/* undef to save memory		*/
 #define CFG_PROMPT		"# "		/* Monitor Command Prompt	*/
 #define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define CFG_MAXARGS		16		/* max number of command args	*/
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/

 #define CFG_MEMTEST_START	PHYS_SDRAM_1
 #define CFG_MEMTEST_END		PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE

 #undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */

 /* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
  * This time is further subdivided by a local divisor.
  */
 #define CFG_TIMERBASE		OMAP1510_TIMER1_BASE
 #define CFG_PVT			7		/* 2^(pvt+1), divide by 256 */
 #define CFG_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))

 #define OMAP5910_DPLL_DIV	1
 #define OMAP5910_DPLL_MUL	((CONFIG_SYS_CLK_FREQ * \
 				 (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)

 #define OMAP5910_ARM_PER_DIV	2	/* CKL/4 */
 #define OMAP5910_LCD_DIV	2	/* CKL/4 */
 #define OMAP5910_ARM_DIV	0	/* CKL/1 */
 #define OMAP5910_DSP_DIV	0	/* CKL/1 */
 #define OMAP5910_TC_DIV		1	/* CKL/2 */
 #define OMAP5910_DSP_MMU_DIV	1	/* CKL/2 */
 #define OMAP5910_ARM_TIM_SEL	1	/* CKL used for MPU timers */

 #define OMAP5910_ARM_EN_CLK	0x03d6	/* 0000 0011 1101 0110b  Clock Enable */
 #define OMAP5910_ARM_CKCTL	((OMAP5910_ARM_PER_DIV)  |	\
 				 (OMAP5910_LCD_DIV << 2) |	\
 				 (OMAP5910_ARM_DIV << 4) |	\
 				 (OMAP5910_DSP_DIV << 6) |	\
 				 (OMAP5910_TC_DIV << 8) |	\
 				 (OMAP5910_DSP_MMU_DIV << 10) |	\
 				 (OMAP5910_ARM_TIM_SEL << 12))

 #define VOICEBLUE_LED_REG	0x04030000

 /*
  * JFFS2 partitions
  *
  */
 /* No command line, one static partition */
 #undef CONFIG_JFFS2_CMDLINE
 #define CONFIG_JFFS2_DEV		"nor0"
 #define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
 #define CONFIG_JFFS2_PART_OFFSET	0x00040000

 /* mtdparts command line support */
 /* Note: fake mtd_id used, no linux mtd map file */
 /*
 #define CONFIG_JFFS2_CMDLINE
 #define MTDIDS_DEFAULT		"nor0=voiceblue-0"
 #define MTDPARTS_DEFAULT	"mtdparts=voiceblue-0:128k(uboot),64k(env),64k(renv),-(jffs2)"
 */

 #endif	/* __CONFIG_H */
	/*
	* (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
	*
	* Configuation settings for the TI OMAP VoiceBlue board.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include <configs/omap1510.h>

	/*
	* High Level Configuration Options
	* (easy to change)
	*/
	#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
	#define CONFIG_OMAP 1 /* in a TI OMAP core */
	#define CONFIG_OMAP1510 1 /* which is in a 5910 */

	/* Input clock of PLL */
	#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz input clock */
	#define CONFIG_XTAL_FREQ 12000000

	#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */

	#define CONFIG_MISC_INIT_R /* There is nothing to really init */
	#define BOARD_LATE_INIT /* but we flash the LEDs here */

	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	#define CONFIG_SETUP_MEMORY_TAGS 1
	#define CONFIG_INITRD_TAG 1

	/*
	* Physical Memory Map
	*/
	#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
	#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
	#define PHYS_SDRAM_1_SIZE SZ_64M

	#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
	#define PHYS_FLASH_2 0x0c000000

	#define CFG_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */

	/*
	* FLASH organization
	*/
	#define CFG_FLASH_CFI /* Flash is CFI conformant */
	#define CFG_FLASH_CFI_DRIVER /* Use the common driver */
	#define CFG_MAX_FLASH_BANKS 1
	#ifdef VOICEBLUE_SMALL_FLASH
	#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_2 }
	#else
	#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1 }
	#endif

	/* FIXME: Does not work on AMD flash */
	/* #define CFG_FLASH_USE_BUFFER_WRITE 1 / / use buffered writes (20x faster) */
	#define CFG_MAX_FLASH_SECT 512 /* max # of sectors on one chip */

	#define CFG_MONITOR_BASE PHYS_FLASH_1
	#define CFG_MONITOR_LEN SZ_128K

	/*
	* Environment settings
	*/
	#ifdef VOICEBLUE_SMALL_FLASH
	#define CFG_ENV_IS_NOWHERE
	#define CFG_ENV_SIZE SZ_1K
	#else
	#define CFG_ENV_IS_IN_FLASH
	#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN)
	#define CFG_ENV_SIZE SZ_8K
	#define CFG_ENV_SECT_SIZE SZ_64K
	#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
	#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE

	#define CONFIG_ENV_OVERWRITE

	#define CFG_JFFS_CUSTOM_PART /* see board/voiceblue/jffs2parts.c */
	#endif

	/*
	* Size of malloc() pool and stack
	*/
	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	#ifdef VOICEBLUE_SMALL_FLASH
	#define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE)
	#define CONFIG_STACKSIZE SZ_8K
	#else
	#define CFG_MALLOC_LEN SZ_4M
	#define CONFIG_STACKSIZE SZ_1M
	#endif

	/*
	* Hardware drivers
	*/
	#define CONFIG_DRIVER_SMC91111
	#define CONFIG_SMC91111_BASE 0x08000300

	/*
	* NS16550 Configuration
	*/
	#define CFG_NS16550
	#define CFG_NS16550_SERIAL
	#define CFG_NS16550_REG_SIZE (-4)
	#define CFG_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */
	#define CFG_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */

	#define CONFIG_CONS_INDEX 1
	#define CONFIG_BAUDRATE 115200
	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }

	#ifdef VOICEBLUE_SMALL_FLASH
	#define CONFIG_COMMANDS (CFG_CMD_BDI \| \
	CFG_CMD_LOADB \| \
	CFG_CMD_IMI \| \
	CFG_CMD_FLASH \| \
	CFG_CMD_MEMORY \| \
	CFG_CMD_NET \| \
	CFG_CMD_BOOTD \| \
	CFG_CMD_DHCP \| \
	CFG_CMD_PING \| \
	CFG_CMD_RUN)
	#else
	#define CONFIG_COMMANDS (CFG_CMD_BDI \| \
	CFG_CMD_LOADB \| \
	CFG_CMD_IMI \| \
	CFG_CMD_FLASH \| \
	CFG_CMD_MEMORY \| \
	CFG_CMD_NET \| \
	CFG_CMD_ENV \| \
	CFG_CMD_BOOTD \| \
	CFG_CMD_DHCP \| \
	CFG_CMD_PING \| \
	CFG_CMD_RUN \| \
	CFG_CMD_JFFS2)
	#endif

	#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
	#define CONFIG_LOOPW

	#ifdef VOICEBLUE_SMALL_FLASH
	#define CONFIG_BOOTDELAY 0
	#undef CONFIG_BOOTARGS /* the preboot command will set bootargs*/
	#define CFG_AUTOLOAD "n" /* no autoload */
	#define CONFIG_PREBOOT "run setup"
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"setup=setenv bootargs console=ttyS0,${baudrate} " \
	"root=/dev/nfs ip=dhcp\0" \
	"update=erase c000000 c03ffff; " \
	"cp.b 10400000 c000000 ${filesize}\0"
	#else
	#define CONFIG_BOOTDELAY 3
	#undef CONFIG_BOOTARGS /* boot command will set bootargs */
	#define CFG_AUTOLOAD "n" /* no autoload */
	#define CONFIG_BOOTCOMMAND "run nboot"
	#define CONFIG_PREBOOT "run setup"
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"ospart=0\0" \
	"swapos=no\0" \
	"setpart=" \
	"if test $swapos = yes; then " \
	"if test $ospart -eq 0; then chpart 4; else chpart 3; fi; "\
	"setenv swapos no; saveenv; " \
	"else " \
	"if test $ospart -eq 0; then chpart 3; else chpart 4; fi; "\
	"fi\0" \
	"setup=setenv bootargs console=ttyS0,$baudrate " \
	"mtdparts=$mtdparts\0" \
	"nfsargs=run setpart; setenv bootargs $bootargs " \
	"root=/dev/nfs ip=dhcp\0" \
	"flashargs=run setpart; setenv bootargs $bootargs " \
	"root=/dev/mtdblock$partition ro " \
	"rootfstype=jffs2\0" \
	"nboot=run nfsargs; bootp; tftp; bootm\0" \
	"fboot=run flashargs; fsload /boot/uImage; bootm\0"
	#endif

	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
	#include <cmd_confdefs.h>

	/*
	* Miscellaneous configurable options
	*/
	#ifndef VOICEBLUE_SMALL_FLASH
	#define CFG_HUSH_PARSER
	#define CFG_PROMPT_HUSH_PS2 "> "
	#define CONFIG_AUTO_COMPLETE
	#endif
	#define CFG_LONGHELP /* undef to save memory */
	#define CFG_PROMPT "# " /* Monitor Command Prompt */
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */

	#define CFG_MEMTEST_START PHYS_SDRAM_1
	#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE

	#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */

	/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
	* This time is further subdivided by a local divisor.
	*/
	#define CFG_TIMERBASE OMAP1510_TIMER1_BASE
	#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */
	#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))

	#define OMAP5910_DPLL_DIV 1
	#define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \
	(1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)

	#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */
	#define OMAP5910_LCD_DIV 2 /* CKL/4 */
	#define OMAP5910_ARM_DIV 0 /* CKL/1 */
	#define OMAP5910_DSP_DIV 0 /* CKL/1 */
	#define OMAP5910_TC_DIV 1 /* CKL/2 */
	#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */
	#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */

	#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */
	#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) \| \
	(OMAP5910_LCD_DIV << 2) \| \
	(OMAP5910_ARM_DIV << 4) \| \
	(OMAP5910_DSP_DIV << 6) \| \
	(OMAP5910_TC_DIV << 8) \| \
	(OMAP5910_DSP_MMU_DIV << 10) \| \
	(OMAP5910_ARM_TIM_SEL << 12))

	#define VOICEBLUE_LED_REG 0x04030000

	/*
	* JFFS2 partitions
	*
	*/
	/* No command line, one static partition */
	#undef CONFIG_JFFS2_CMDLINE
	#define CONFIG_JFFS2_DEV "nor0"
	#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
	#define CONFIG_JFFS2_PART_OFFSET 0x00040000

	/* mtdparts command line support */
	/* Note: fake mtd_id used, no linux mtd map file */
	/*
	#define CONFIG_JFFS2_CMDLINE
	#define MTDIDS_DEFAULT "nor0=voiceblue-0"
	#define MTDPARTS_DEFAULT "mtdparts=voiceblue-0:128k(uboot),64k(env),64k(renv),-(jffs2)"
	*/

	#endif /* __CONFIG_H */