| /* |
| * |
| * Generic Header information generated by 13704CFG.EXE (Build 10) |
| * |
| * Copyright (c) 2000,2001 Epson Research and Development, Inc. |
| * All rights reserved. |
| * |
| * Panel: 320x240x4bpp 78Hz Mono 4-Bit STN, Disabled (PCLK=6.666MHz) |
| * |
| * This file defines the configuration environment and registers, |
| * which can be used by any software, such as display drivers. |
| * |
| * PLEASE NOTE: If you FTP this file to a non-Windows platform, make |
| * sure you transfer this file using ASCII, not BINARY |
| * mode. |
| * |
| */ |
| |
| static S1D_REGS regs_13704_320_240_4bpp[] = |
| { |
| { 0x00, 0x00 }, /* Revision Code Register */ |
| { 0x01, 0x04 }, /*00*/ /* Mode Register 0 Register */ |
| { 0x02, 0xA4 }, /*a0*/ /* Mode Register 1 Register */ |
| { 0x03, 0x83 }, /*03*/ /* Mode Register 2 Register - bit7 is LUT bypass */ |
| { 0x04, 0x27 }, /* Horizontal Panel Size Register */ |
| { 0x05, 0xEF }, /* Vertical Panel Size Register (LSB) */ |
| { 0x06, 0x00 }, /* Vertical Panel Size Register (MSB) */ |
| { 0x07, 0x00 }, /* FPLINE Start Position Register */ |
| { 0x08, 0x00 }, /* Horizontal Non-Display Period Register */ |
| { 0x09, 0x00 }, /* FPFRAME Start Position Register */ |
| { 0x0A, 0x02 }, /* Vertical Non-Display Period Register */ |
| { 0x0B, 0x00 }, /* MOD Rate Register */ |
| { 0x0C, 0x00 }, /* Screen 1 Start Address Register (LSB) */ |
| { 0x0D, 0x00 }, /* Screen 1 Start Address Register (MSB) */ |
| { 0x0E, 0x00 }, /* Not Used */ |
| { 0x0F, 0x00 }, /* Screen 2 Start Address Register (LSB) */ |
| { 0x10, 0x00 }, /* Screen 2 Start Address Register (MSB) */ |
| { 0x11, 0x00 }, /* Not Used */ |
| { 0x12, 0x00 }, /* Memory Address Offset Register */ |
| { 0x13, 0xFF }, /* Screen 1 Vertical Size Register (LSB) */ |
| { 0x14, 0x03 }, /* Screen 1 Vertical Size Register (MSB) */ |
| { 0x15, 0x00 }, /* Look-Up Table Address Register */ |
| { 0x16, 0x00 }, /* Look-Up Table Bank Select Register */ |
| { 0x17, 0x00 }, /* Look-Up Table Data Register */ |
| { 0x18, 0x01 }, /* GPIO Configuration Control Register */ |
| { 0x19, 0x01 }, /* GPIO Status/Control Register */ |
| { 0x1A, 0x00 }, /* Scratch Pad Register */ |
| { 0x1B, 0x00 }, /* SwivelView Mode Register */ |
| { 0x1C, 0xA0 }, /* Line Byte Count Register */ |
| { 0x1D, 0x00 }, /* Not Used */ |
| { 0x1E, 0x00 }, /* Not Used */ |
| { 0x1F, 0x00 }, /* Not Used */ |
| }; |
