| /* |
| * Copyright (c) 2013 Qualcomm Atheros, Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * Manage the atheros ethernet PHY. |
| * |
| * All definitions in this file are operating system independent! |
| */ |
| |
| #include <config.h> |
| #include <linux/types.h> |
| #include <common.h> |
| #include <miiphy.h> |
| #include "phy.h" |
| #include <asm/addrspace.h> |
| #include <atheros.h> |
| #include "athr_s27_phy.h" |
| |
| /* PHY selections and access functions */ |
| |
| typedef enum { |
| PHY_SRCPORT_INFO, |
| PHY_PORTINFO_SIZE, |
| } PHY_CAP_TYPE; |
| |
| typedef enum { |
| PHY_SRCPORT_NONE, |
| PHY_SRCPORT_VLANTAG, |
| PHY_SRCPORT_TRAILER, |
| } PHY_SRCPORT_TYPE; |
| |
| #define DRV_LOG(DBG_SW, X0, X1, X2, X3, X4, X5, X6) |
| #define DRV_MSG(x,a,b,c,d,e,f) |
| #define DRV_PRINT(DBG_SW,X) |
| |
| #define ATHR_LAN_PORT_VLAN 1 |
| #define ATHR_WAN_PORT_VLAN 2 |
| #define ENET_UNIT_LAN 1 |
| #define ENET_UNIT_WAN 0 |
| |
| #define TRUE 1 |
| #define FALSE 0 |
| |
| #define ATHR_PHY0_ADDR 0x0 |
| #define ATHR_PHY1_ADDR 0x1 |
| #define ATHR_PHY2_ADDR 0x2 |
| #define ATHR_PHY3_ADDR 0x3 |
| #define ATHR_PHY4_ADDR 0x4 |
| |
| #define MODULE_NAME "ATHRS27" |
| |
| /* |
| * Track per-PHY port information. |
| */ |
| |
| |
| typedef struct { |
| BOOL isEnetPort; /* normal enet port */ |
| BOOL isPhyAlive; /* last known state of link */ |
| int ethUnit; /* MAC associated with this phy port */ |
| uint32_t phyBase; |
| uint32_t phyAddr; /* PHY registers associated with this phy port */ |
| uint32_t VLANTableSetting; /* Value to be written to VLAN table */ |
| } athrPhyInfo_t; |
| |
| /* |
| * Per-PHY information, indexed by PHY unit number. |
| */ |
| static athrPhyInfo_t athrPhyInfo[] = { |
| |
| {TRUE, /* port 1 -- LAN port 1 */ |
| FALSE, |
| ENET_UNIT_LAN, |
| 0, |
| ATHR_PHY0_ADDR, |
| ATHR_LAN_PORT_VLAN |
| }, |
| |
| {TRUE, /* port 2 -- LAN port 2 */ |
| FALSE, |
| ENET_UNIT_LAN, |
| 0, |
| ATHR_PHY1_ADDR, |
| ATHR_LAN_PORT_VLAN |
| }, |
| |
| {TRUE, /* port 3 -- LAN port 3 */ |
| FALSE, |
| ENET_UNIT_LAN, |
| 0, |
| ATHR_PHY2_ADDR, |
| ATHR_LAN_PORT_VLAN |
| }, |
| |
| |
| {TRUE, /* port 4 -- LAN port 4 */ |
| FALSE, |
| ENET_UNIT_LAN, |
| 0, |
| ATHR_PHY3_ADDR, |
| ATHR_LAN_PORT_VLAN /* Send to all ports */ |
| }, |
| |
| {TRUE, /* port 5 -- WAN Port 5 */ |
| FALSE, |
| ENET_UNIT_WAN, |
| 0, |
| ATHR_PHY4_ADDR, |
| ATHR_LAN_PORT_VLAN /* Send to all ports */ |
| }, |
| |
| {FALSE, /* port 0 -- cpu port 0 */ |
| TRUE, |
| ENET_UNIT_LAN, |
| 0, |
| 0x00, |
| ATHR_LAN_PORT_VLAN |
| }, |
| |
| }; |
| |
| |
| #define ATHR_GLOBALREGBASE 0 |
| |
| #define ATHR_PHY_MAX 5 |
| |
| /* Range of valid PHY IDs is [MIN..MAX] */ |
| #define ATHR_ID_MIN 0 |
| #define ATHR_ID_MAX (ATHR_PHY_MAX-1) |
| |
| |
| /* Convenience macros to access myPhyInfo */ |
| #define ATHR_IS_ENET_PORT(phyUnit) (athrPhyInfo[phyUnit].isEnetPort) |
| #define ATHR_IS_PHY_ALIVE(phyUnit) (athrPhyInfo[phyUnit].isPhyAlive) |
| #define ATHR_ETHUNIT(phyUnit) (athrPhyInfo[phyUnit].ethUnit) |
| #define ATHR_PHYBASE(phyUnit) (athrPhyInfo[phyUnit].phyBase) |
| #define ATHR_PHYADDR(phyUnit) (athrPhyInfo[phyUnit].phyAddr) |
| #define ATHR_VLAN_TABLE_SETTING(phyUnit) (athrPhyInfo[phyUnit].VLANTableSetting) |
| |
| |
| #define ATHR_IS_ETHUNIT(phyUnit, ethUnit) \ |
| (ATHR_IS_ENET_PORT(phyUnit) && \ |
| ATHR_ETHUNIT(phyUnit) == (ethUnit)) |
| |
| #define ATHR_IS_WAN_PORT(phyUnit) (!(ATHR_ETHUNIT(phyUnit)==ENET_UNIT_LAN)) |
| |
| /* Forward references */ |
| BOOL athrs27_phy_is_link_alive(int phyUnit); |
| uint32_t athrs27_reg_read(uint32_t reg_addr); |
| void athrs27_reg_write(uint32_t reg_addr, uint32_t reg_val); |
| unsigned int s27_rd_phy(unsigned int phy_addr, unsigned int reg_addr); |
| void s27_wr_phy(unsigned int phy_addr, unsigned int reg_addr, unsigned int write_data); |
| |
| |
| void athrs27_powersave_off(int phy_addr) |
| { |
| s27_wr_phy(phy_addr,ATHR_DEBUG_PORT_ADDRESS,0x29); |
| s27_wr_phy(phy_addr,ATHR_DEBUG_PORT_DATA,0x36c0); |
| |
| } |
| void athrs27_sleep_off(int phy_addr) |
| { |
| s27_wr_phy(phy_addr,ATHR_DEBUG_PORT_ADDRESS,0xb); |
| s27_wr_phy(phy_addr,ATHR_DEBUG_PORT_DATA,0x3c00); |
| } |
| |
| void athrs27_force_100M(int phyAddr,int duplex) |
| { |
| /* |
| * Force MDI and MDX to alternate ports |
| * Phy 0,2 and 4 -- MDI |
| * Phy 1 and 3 -- MDX |
| */ |
| |
| if(phyAddr%2) { |
| s27_wr_phy(phyAddr,ATHR_PHY_FUNC_CONTROL,0x820); |
| } |
| else { |
| s27_wr_phy(phyAddr,ATHR_PHY_FUNC_CONTROL,0x800); |
| } |
| |
| s27_wr_phy(phyAddr,0x1d,0x29); |
| s27_wr_phy(phyAddr,0x1e,0x0); |
| s27_wr_phy(phyAddr,0x10,0xc60); |
| s27_wr_phy(phyAddr,ATHR_PHY_CONTROL,(0xa000|(duplex << 8))); |
| } |
| |
| void athrs27_force_10M(int phyAddr,int duplex) |
| { |
| |
| athrs27_powersave_off(phyAddr); |
| athrs27_sleep_off(phyAddr); |
| |
| s27_wr_phy(phyAddr,ATHR_PHY_CONTROL,(0x8000 |(duplex << 8))); |
| } |
| |
| int athrs27_reg_init(void) |
| { |
| #if S27_PHY_DEBUG |
| uint32_t rd_val; |
| #endif |
| |
| /* if using header for register configuration, we have to */ |
| /* configure s27 register after frame transmission is enabled */ |
| athrs27_reg_rmw(0x8,(1<<28)); /* Set WAN port is connected to GE0 */ |
| |
| #if defined(S27_FORCE_100M) |
| athrs27_force_100M(ATHR_PHY4_ADDR,1); |
| #elif defined(S27_FORCE_10M) |
| athrs27_force_10M(ATHR_PHY4_ADDR,1); |
| #else |
| s27_wr_phy(ATHR_PHY4_ADDR,ATHR_PHY_CONTROL,0x9000); |
| |
| #endif |
| #ifdef S27_PHY_DEBUG |
| printf(MODULE_NAME":OPERATIONAL_MODE_REG0:%x\n",athrs27_reg_read(OPERATIONAL_MODE_REG0)); |
| printf(MODULE_NAME":REG 0x4-->:%x\n",athrs27_reg_read(0x4)); |
| printf(MODULE_NAME":REG 0x2c-->:%x\n",athrs27_reg_read(0x2c)); |
| printf(MODULE_NAME":REG 0x8-->:%x\n",athrs27_reg_read(0x8)); |
| #endif |
| |
| return 0; |
| } |
| |
| int athrs27_reg_init_lan(void) |
| { |
| int i = 60; |
| #if S26_PHY_DEBUG |
| uint32_t rd_val; |
| #endif |
| int phyUnit; |
| uint32_t phyBase = 0; |
| BOOL foundPhy = FALSE; |
| uint32_t phyAddr = 0; |
| |
| |
| /* reset switch */ |
| printf(MODULE_NAME ": resetting s27\n"); |
| athrs27_reg_write(0x0, athrs27_reg_read(0x0)|0x80000000); |
| |
| while(i--) { |
| sysMsDelay(100); |
| if(!(athrs27_reg_read(0x0)&0x80000000)) |
| break; |
| } |
| printf(MODULE_NAME ": s27 reset done\n"); |
| athrs27_reg_write(PORT_STATUS_REGISTER0,0x4e); |
| |
| athrs27_reg_rmw(OPERATIONAL_MODE_REG0,(1<<6)); /* Set GMII mode */ |
| |
| if (is_emu() || is_wasp()) { |
| athrs27_reg_rmw(0x2c,((1<<26)| (1<<16) | 0x1)); /* FiX ME: EBU debug */ |
| } |
| |
| for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) { |
| |
| foundPhy = TRUE; |
| phyBase = ATHR_PHYBASE(phyUnit); |
| phyAddr = ATHR_PHYADDR(phyUnit); |
| |
| #if defined(S27_FORCE_100M) |
| athrs27_force_100M(phyAddr,1); |
| #elif defined(S27_FORCE_10M) |
| athrs27_force_10M(phyAddr,1); |
| #else |
| s27_wr_phy(phyAddr,ATHR_PHY_CONTROL,0x9000); |
| #endif |
| |
| #if S27_PHY_DEBUG |
| rd_val = s27_rd_phy(phyAddr,ATHR_PHY_FUNC_CONTROL); |
| printf("S27 ATHR_PHY_FUNC_CONTROL (%d):%x\n",phyAddr,rd_val); |
| rd_val = s27_rd_phy(phyAddr,ATHR_PHY_ID1); |
| printf("S27 PHY ID (%d) :%x\n",phyAddr, rd_val); |
| rd_val = s27_rd_phy(phyAddr,ATHR_PHY_SPEC_STATUS); |
| printf("S27 PHY CTRL (%d) :%x\n",phyAddr, rd_val); |
| rd_val = s27_rd_phy(phyAddr,ATHR_PHY_STATUS); |
| printf("S27 ATHR PHY STATUS (%d) :%x\n",phyAddr, rd_val); |
| #endif |
| } |
| |
| /* |
| * status[1:0]=2'h2; - (0x10 - 1000 Mbps , 0x01 - 100Mbps, 0x0 - 10 Mbps) |
| * status[2]=1'h1; - Tx Mac En |
| * status[3]=1'h1; - Rx Mac En |
| * status[4]=1'h1; - Tx Flow Ctrl En |
| * status[5]=1'h1; - Rx Flow Ctrl En |
| * status[6]=1'h1; - Duplex Mode |
| */ |
| athrs27_reg_write(PORT_STATUS_REGISTER1, 0x200); /* LAN - 1 */ |
| athrs27_reg_write(PORT_STATUS_REGISTER2, 0x200); /* LAN - 2 */ |
| athrs27_reg_write(PORT_STATUS_REGISTER3, 0x200); /* LAN - 3 */ |
| athrs27_reg_write(PORT_STATUS_REGISTER4, 0x200); /* LAN - 4 */ |
| |
| if (is_emu()) { |
| athrs27_reg_write(PORT_STATUS_REGISTER1, 0x4C); /* LAN - 1 */ |
| athrs27_reg_write(PORT_STATUS_REGISTER2, 0x4c); /* LAN - 2 */ |
| athrs27_reg_write(PORT_STATUS_REGISTER3, 0x4c); /* LAN - 3 */ |
| athrs27_reg_write(PORT_STATUS_REGISTER4, 0x4c); /* LAN - 4 */ |
| } |
| |
| /* QM Control */ |
| athrs27_reg_write(0x38, 0xc000050e); |
| |
| /* |
| * status[11]=1'h0; - CPU Disable |
| * status[7] = 1'b1; - Learn One Lock |
| * status[14] = 1'b0; - Learn Enable |
| */ |
| #ifdef ATHEROS_HEADER_EN |
| athrs27_reg_write(PORT_CONTROL_REGISTER0, 0x4804); |
| #else |
| /* Atheros Header Disable */ |
| athrs27_reg_write(PORT_CONTROL_REGISTER0, 0x4004); |
| #endif |
| |
| /* Tag Priority Mapping */ |
| athrs27_reg_write(0x70, 0xfa50); |
| |
| /* Enable ARP packets to CPU port */ |
| athrs27_reg_write(S27_ARL_TBL_CTRL_REG,(athrs27_reg_read(S27_ARL_TBL_CTRL_REG) | 0x100000)); |
| |
| /* Enable Broadcast packets to CPU port */ |
| athrs27_reg_write(S27_FLD_MASK_REG,(athrs27_reg_read(S27_FLD_MASK_REG) | |
| S27_ENABLE_CPU_BROADCAST | S27_ENABLE_CPU_BCAST_FWD )); |
| |
| return 0; |
| } |
| |
| /****************************************************************************** |
| * |
| * athrs27_phy_is_link_alive - test to see if the specified link is alive |
| * |
| * RETURNS: |
| * TRUE --> link is alive |
| * FALSE --> link is down |
| */ |
| BOOL |
| athrs27_phy_is_link_alive(int phyUnit) |
| { |
| uint16_t phyHwStatus; |
| uint32_t phyBase; |
| uint32_t phyAddr; |
| |
| phyBase = ATHR_PHYBASE(phyUnit); |
| phyAddr = ATHR_PHYADDR(phyUnit); |
| phyHwStatus = s27_rd_phy(phyAddr, ATHR_PHY_SPEC_STATUS); |
| |
| if (phyHwStatus & ATHR_STATUS_LINK_PASS) |
| return TRUE; |
| |
| return FALSE; |
| } |
| |
| /****************************************************************************** |
| * |
| * athrs27_phy_setup - reset and setup the PHY associated with |
| * the specified MAC unit number. |
| * |
| * Resets the associated PHY port. |
| * |
| * RETURNS: |
| * TRUE --> associated PHY is alive |
| * FALSE --> no LINKs on this ethernet unit |
| */ |
| BOOL |
| athrs27_phy_setup(int ethUnit) |
| { |
| int phyUnit; |
| uint16_t phyHwStatus; |
| uint16_t timeout; |
| int liveLinks = 0; |
| uint32_t phyBase = 0; |
| BOOL foundPhy = FALSE; |
| uint32_t phyAddr = 0; |
| //#if S27_PHY_DEBUG |
| uint32_t rd_val = 0; |
| //#endif |
| uint32_t ar7240_revid; |
| |
| |
| /* See if there's any configuration data for this enet */ |
| /* start auto negogiation on each phy */ |
| for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) { |
| |
| foundPhy = TRUE; |
| phyBase = ATHR_PHYBASE(phyUnit); |
| phyAddr = ATHR_PHYADDR(phyUnit); |
| |
| if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) { |
| continue; |
| } |
| if (!is_emu()) { |
| s27_wr_phy(phyAddr, ATHR_AUTONEG_ADVERT,ATHR_ADVERTISE_ALL); |
| |
| s27_wr_phy(phyAddr, ATHR_PHY_CONTROL,ATHR_CTRL_AUTONEGOTIATION_ENABLE |
| | ATHR_CTRL_SOFTWARE_RESET); |
| } |
| else { |
| printf("############ is emulation ############\n"); |
| |
| if(ATHR_ETHUNIT(phyUnit) == ENET_UNIT_WAN) { |
| s27_wr_phy(phyAddr, ATHR_AUTONEG_ADVERT,ATHR_ADVERTISE_ALL); |
| s27_wr_phy(phyAddr,0x9, 0x0); //donot advertise 1000Mbps mode |
| s27_wr_phy(phyAddr, ATHR_PHY_CONTROL,0x0); |
| s27_wr_phy(phyAddr, ATHR_PHY_CONTROL,ATHR_CTRL_AUTONEGOTIATION_ENABLE |
| | ATHR_CTRL_SOFTWARE_RESET); |
| } |
| else { |
| |
| s27_wr_phy(phyAddr, ATHR_AUTONEG_ADVERT,(ATHR_ADVERTISE_ASYM_PAUSE | ATHR_ADVERTISE_PAUSE | |
| ATHR_ADVERTISE_10HALF | ATHR_ADVERTISE_10FULL)); |
| s27_wr_phy(phyAddr,0x9, 0x0); //donot advertise 1000Mbps mode |
| s27_wr_phy(phyAddr, ATHR_PHY_CONTROL,0x0); |
| s27_wr_phy(phyAddr, ATHR_PHY_CONTROL,ATHR_CTRL_AUTONEGOTIATION_ENABLE |
| | ATHR_CTRL_SOFTWARE_RESET); |
| } |
| } |
| rd_val = s27_rd_phy(phyAddr,ATHR_PHY_CONTROL); |
| printf("%s ATHR_PHY_CONTROL %d :%x\n",__func__,phyAddr,rd_val); |
| rd_val = s27_rd_phy(phyAddr,ATHR_PHY_SPEC_STATUS); |
| printf("%s ATHR_PHY_SPEC_STAUS %d :%x\n",__func__,phyAddr,rd_val); |
| } |
| if (!foundPhy) { |
| return FALSE; /* No PHY's configured for this ethUnit */ |
| } |
| |
| /* |
| * After the phy is reset, it takes a little while before |
| * it can respond properly. |
| */ |
| if (ethUnit == ENET_UNIT_LAN) |
| sysMsDelay(1000); |
| else |
| sysMsDelay(3000); |
| |
| /* |
| * Wait up to 3 seconds for ALL associated PHYs to finish |
| * autonegotiation. The only way we get out of here sooner is |
| * if ALL PHYs are connected AND finish autonegotiation. |
| */ |
| for (phyUnit=0; (phyUnit < ATHR_PHY_MAX) /*&& (timeout > 0) */; phyUnit++) { |
| if (ATHR_ETHUNIT(phyUnit) == ENET_UNIT_WAN) |
| continue; |
| |
| timeout=20; |
| for (;;) { |
| phyHwStatus = s27_rd_phy(phyAddr, ATHR_PHY_CONTROL); |
| |
| if (ATHR_RESET_DONE(phyHwStatus)) { |
| DRV_PRINT(DRV_DEBUG_PHYSETUP, |
| ("Port %d, Neg Success\n", phyUnit)); |
| break; |
| } |
| if (timeout == 0) { |
| DRV_PRINT(DRV_DEBUG_PHYSETUP, |
| ("Port %d, Negogiation timeout\n", phyUnit)); |
| break; |
| } |
| if (--timeout == 0) { |
| DRV_PRINT(DRV_DEBUG_PHYSETUP, |
| ("Port %d, Negogiation timeout\n", phyUnit)); |
| break; |
| } |
| |
| sysMsDelay(150); |
| } |
| /* extend the cable length */ |
| s27_wr_phy(phyUnit, ATHR_DEBUG_PORT_ADDRESS, 0x14); |
| s27_wr_phy(phyUnit, ATHR_DEBUG_PORT_DATA, 0xf52); |
| |
| /* Force Class A setting phys */ |
| s27_wr_phy(phyUnit, ATHR_DEBUG_PORT_ADDRESS, 4); |
| s27_wr_phy(phyUnit, ATHR_DEBUG_PORT_DATA, 0xebbb); |
| s27_wr_phy(phyUnit, ATHR_DEBUG_PORT_ADDRESS, 5); |
| s27_wr_phy(phyUnit, ATHR_DEBUG_PORT_DATA, 0x2c47); |
| |
| /* fine-tune PHYs */ |
| s27_wr_phy(phyUnit, ATHR_DEBUG_PORT_ADDRESS, 0x3c); |
| s27_wr_phy(phyUnit, ATHR_DEBUG_PORT_DATA, 0x1c1); |
| s27_wr_phy(phyUnit, ATHR_DEBUG_PORT_ADDRESS, 0x37); |
| s27_wr_phy(phyUnit, ATHR_DEBUG_PORT_DATA, 0xd600); |
| |
| |
| #ifdef S27_VER_1_0 |
| /* turn off power saving */ |
| s27_wr_phy(phyUnit, 29, 41); |
| s27_wr_phy(phyUnit, 30, 0); |
| printf("def_ S27_VER_1_0\n"); |
| #endif |
| } |
| |
| /* |
| * All PHYs have had adequate time to autonegotiate. |
| * Now initialize software status. |
| * |
| * It's possible that some ports may take a bit longer |
| * to autonegotiate; but we can't wait forever. They'll |
| * get noticed by mv_phyCheckStatusChange during regular |
| * polling activities. |
| */ |
| for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) { |
| if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) { |
| continue; |
| } |
| |
| if (athrs27_phy_is_link_alive(phyUnit)) { |
| liveLinks++; |
| ATHR_IS_PHY_ALIVE(phyUnit) = TRUE; |
| } else { |
| ATHR_IS_PHY_ALIVE(phyUnit) = FALSE; |
| } |
| DRV_PRINT(DRV_DEBUG_PHYSETUP, |
| ("eth%d: Phy Specific Status=%4.4x\n", |
| ethUnit, |
| s27_rd_phy(ATHR_PHYADDR(phyUnit),ATHR_PHY_SPEC_STATUS))); |
| } |
| |
| return (liveLinks > 0); |
| } |
| |
| /****************************************************************************** |
| * |
| * athrs27_phy_is_fdx - Determines whether the phy ports associated with the |
| * specified device are FULL or HALF duplex. |
| * |
| * RETURNS: |
| * 1 --> FULL |
| * 0 --> HALF |
| */ |
| int |
| athrs27_phy_is_fdx(int ethUnit,int phyUnit) |
| { |
| uint32_t phyBase; |
| uint32_t phyAddr; |
| uint16_t phyHwStatus; |
| int ii = 200; |
| |
| if (ethUnit == ENET_UNIT_LAN) |
| return TRUE; |
| |
| for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) { |
| if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) { |
| continue; |
| } |
| |
| if (athrs27_phy_is_link_alive(phyUnit)) { |
| |
| phyBase = ATHR_PHYBASE(phyUnit); |
| phyAddr = ATHR_PHYADDR(phyUnit); |
| |
| do { |
| phyHwStatus = s27_rd_phy (phyAddr, ATHR_PHY_SPEC_STATUS); |
| if(phyHwStatus & ATHR_STATUS_RESOVLED) |
| break; |
| sysMsDelay(10); |
| } while(--ii); |
| if (phyHwStatus & ATHER_STATUS_FULL_DUPLEX) { |
| return TRUE; |
| } |
| } |
| } |
| |
| return FALSE; |
| } |
| /****************************************************************************** |
| * |
| * athrs27_phy_speed - Determines the speed of phy ports associated with the |
| * specified device. |
| * |
| * RETURNS: |
| * ATHR_PHY_SPEED_10T, AG7240_PHY_SPEED_100T; |
| * ATHR_PHY_SPEED_1000T; |
| */ |
| |
| int |
| athrs27_phy_speed(int ethUnit,int phyUnit) |
| { |
| uint16_t phyHwStatus; |
| uint32_t phyBase; |
| uint32_t phyAddr; |
| int ii = 200; |
| int phySpeed; |
| for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) { |
| if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) { |
| continue; |
| } |
| |
| |
| phyBase = ATHR_PHYBASE(phyUnit); |
| phyAddr = ATHR_PHYADDR(phyUnit); |
| phySpeed = _10BASET; |
| |
| if (athrs27_phy_is_link_alive(phyUnit)) { |
| |
| do { |
| phyHwStatus = s27_rd_phy(phyAddr, |
| ATHR_PHY_SPEC_STATUS); |
| if(phyHwStatus & ATHR_STATUS_RESOVLED) |
| break; |
| sysMsDelay(10); |
| }while(--ii); |
| |
| phyHwStatus = ((phyHwStatus & ATHER_STATUS_LINK_MASK) >> |
| ATHER_STATUS_LINK_SHIFT); |
| |
| switch(phyHwStatus) { |
| case 0: |
| phySpeed = _10BASET; |
| break; |
| case 1: |
| phySpeed = _100BASET; |
| break; |
| case 2: |
| phySpeed = _1000BASET; |
| break; |
| default: |
| printf("Unkown speed read!\n"); |
| } |
| } |
| |
| phy_reg_write(1,phyAddr, ATHR_DEBUG_PORT_ADDRESS, 0x18); |
| |
| if(phySpeed == _100BASET) { |
| phy_reg_write(1,phyAddr, ATHR_DEBUG_PORT_DATA, 0xba8); |
| } else { |
| phy_reg_write(1,phyAddr, ATHR_DEBUG_PORT_DATA, 0x2ea); |
| } |
| } |
| |
| if (ethUnit == ENET_UNIT_LAN) |
| phySpeed = _1000BASET; |
| |
| return phySpeed; |
| } |
| |
| /***************************************************************************** |
| * |
| * athr_phy_is_up -- checks for significant changes in PHY state. |
| * |
| * A "significant change" is: |
| * dropped link (e.g. ethernet cable unplugged) OR |
| * autonegotiation completed + link (e.g. ethernet cable plugged in) |
| * |
| * When a PHY is plugged in, phyLinkGained is called. |
| * When a PHY is unplugged, phyLinkLost is called. |
| */ |
| |
| int |
| athrs27_phy_is_up(int ethUnit) |
| { |
| |
| uint16_t phyHwStatus, phyHwControl; |
| athrPhyInfo_t *lastStatus; |
| int linkCount = 0; |
| int lostLinks = 0; |
| int gainedLinks = 0; |
| uint32_t phyBase; |
| uint32_t phyAddr; |
| int phyUnit; |
| |
| for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) { |
| if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) { |
| continue; |
| } |
| |
| phyBase = ATHR_PHYBASE(phyUnit); |
| phyAddr = ATHR_PHYADDR(phyUnit); |
| |
| lastStatus = &athrPhyInfo[phyUnit]; |
| if (lastStatus->isPhyAlive) { /* last known link status was ALIVE */ |
| phyHwStatus = s27_rd_phy(phyAddr, ATHR_PHY_SPEC_STATUS); |
| |
| /* See if we've lost link */ |
| if (phyHwStatus & ATHR_STATUS_LINK_PASS) { |
| linkCount++; |
| } else { |
| lostLinks++; |
| DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d down\n", |
| ethUnit, phyUnit)); |
| printf("enet%d port%d down\n",ethUnit, phyUnit); |
| lastStatus->isPhyAlive = FALSE; |
| } |
| } else { /* last known link status was DEAD */ |
| /* Check for reset complete */ |
| if(is_emu()) |
| { |
| phyHwStatus = s27_rd_phy(phyAddr, ATHR_PHY_STATUS); |
| if(phyAddr%2) { |
| s27_wr_phy(phyAddr,ATHR_PHY_FUNC_CONTROL,0x820); |
| } |
| else { |
| s27_wr_phy(phyAddr,ATHR_PHY_FUNC_CONTROL,0x800); |
| } |
| |
| if((phyHwStatus & 0x4)==0) |
| { |
| s27_wr_phy(phyAddr,0x9,0x0); |
| if(phyAddr !=0x4) |
| s27_wr_phy(phyAddr,0x4,0x41); |
| s27_wr_phy(phyAddr,0x0,0x9000); |
| } |
| } |
| |
| phyHwStatus = s27_rd_phy(phyAddr, ATHR_PHY_CONTROL); |
| if (!ATHR_RESET_DONE(phyHwStatus)) |
| continue; |
| |
| phyHwControl = s27_rd_phy(phyAddr, ATHR_PHY_CONTROL); |
| phyHwStatus = s27_rd_phy(phyAddr, ATHR_PHY_STATUS); |
| |
| /* Check for AutoNegotiation complete */ |
| if ((!(phyHwControl & ATHR_CTRL_AUTONEGOTIATION_ENABLE)) |
| || ATHR_AUTONEG_DONE(phyHwStatus)) { |
| phyHwStatus = s27_rd_phy(phyAddr, |
| ATHR_PHY_SPEC_STATUS); |
| |
| if (phyHwStatus & ATHR_STATUS_LINK_PASS) { |
| gainedLinks++; |
| linkCount++; |
| printf("enet%d port%d up\n",ethUnit, phyUnit); |
| DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d up\n", |
| ethUnit, phyUnit)); |
| lastStatus->isPhyAlive = TRUE; |
| } |
| } |
| } |
| } |
| return (linkCount); |
| } |
| |
| unsigned int athrs27_reg_read(unsigned int s27_addr) |
| { |
| unsigned int addr_temp; |
| unsigned int s27_rd_csr_low, s27_rd_csr_high, s27_rd_csr; |
| unsigned int data,unit = 0; |
| unsigned int phy_address, reg_address; |
| |
| addr_temp = s27_addr >>2; |
| data = addr_temp >> 7; |
| |
| phy_address = 0x1f; |
| reg_address = 0x10; |
| |
| if (is_ar7240()) { |
| unit = 0; |
| } |
| else if(is_ar7241() || is_ar7242() || is_wasp() || is_qca953x() || is_qca956x()) { |
| unit = 1; |
| } |
| |
| phy_reg_write(unit,phy_address, reg_address, data); |
| |
| phy_address = (0x17 & ((addr_temp >> 4) | 0x10)); |
| reg_address = ((addr_temp << 1) & 0x1e); |
| s27_rd_csr_low = (uint32_t) phy_reg_read(unit,phy_address, reg_address); |
| |
| reg_address = reg_address | 0x1; |
| s27_rd_csr_high = (uint32_t) phy_reg_read(unit,phy_address, reg_address); |
| s27_rd_csr = (s27_rd_csr_high << 16) | s27_rd_csr_low ; |
| |
| return(s27_rd_csr); |
| } |
| |
| void athrs27_reg_write(unsigned int s27_addr, unsigned int s27_write_data) |
| { |
| unsigned int addr_temp; |
| unsigned int data; |
| unsigned int phy_address, reg_address,unit = 0; |
| |
| addr_temp = (s27_addr ) >>2; |
| data = addr_temp >> 7; |
| |
| phy_address = 0x1f; |
| reg_address = 0x10; |
| |
| if (is_ar7240()) { |
| unit = 0; |
| } |
| else if(is_ar7241() || is_ar7242() || is_wasp() || is_qca953x() || is_qca956x()) { |
| unit = 1; |
| } |
| phy_reg_write(unit,phy_address, reg_address, data); |
| |
| phy_address = (0x17 & ((addr_temp >> 4) | 0x10)); |
| |
| reg_address = (((addr_temp << 1) & 0x1e) | 0x1); |
| data = (s27_write_data >> 16) & 0xffff; |
| phy_reg_write(unit,phy_address, reg_address, data); |
| |
| reg_address = ((addr_temp << 1) & 0x1e); |
| data = s27_write_data & 0xffff; |
| phy_reg_write(unit,phy_address, reg_address, data); |
| |
| } |
| |
| void athrs27_reg_rmw(unsigned int s27_addr, unsigned int s27_write_data) |
| { |
| int val = athrs27_reg_read(s27_addr); |
| athrs27_reg_write(s27_addr,(val | s27_write_data)); |
| } |
| |
| unsigned int s27_rd_phy(unsigned int phy_addr, unsigned int reg_addr) |
| { |
| int unit, val = 0; |
| |
| if (is_ar7240()) { |
| unit = 0; |
| } else if(is_ar7241() || is_ar7242() || is_wasp() || is_qca953x() || is_qca956x()) { |
| unit = 1; |
| } |
| val = (uint32_t) phy_reg_read(unit, phy_addr, reg_addr); |
| return val; |
| } |
| |
| void s27_wr_phy(unsigned int phy_addr, unsigned int reg_addr, unsigned int write_data) |
| { |
| int unit; |
| |
| if (is_ar7240()) { |
| unit = 0; |
| } else if(is_ar7241() || is_ar7242() || is_wasp() || is_qca953x() || is_qca956x()) { |
| unit = 1; |
| } |
| |
| phy_reg_write(unit, phy_addr, reg_addr, write_data); |
| } |
| int athrs27_mdc_check() |
| { |
| int i; |
| |
| for (i=0; i<4000; i++) { |
| if(athrs27_reg_read(0x10c) != 0x18007fff) |
| return -1; |
| } |
| return 0; |
| } |
| |
