| /* |
| * (C) Copyright 2000-2002 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <74xx_7xx.h> |
| #include <asm/processor.h> |
| |
| #ifdef CONFIG_AMIGAONEG3SE |
| #include "../board/MAI/AmigaOneG3SE/via686.h" |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static const int hid1_multipliers_x_10[] = { |
| 25, /* 0000 - 2.5x */ |
| 75, /* 0001 - 7.5x */ |
| 70, /* 0010 - 7x */ |
| 10, /* 0011 - bypass */ |
| 20, /* 0100 - 2x */ |
| 65, /* 0101 - 6.5x */ |
| 100, /* 0110 - 10x */ |
| 45, /* 0111 - 4.5x */ |
| 30, /* 1000 - 3x */ |
| 55, /* 1001 - 5.5x */ |
| 40, /* 1010 - 4x */ |
| 50, /* 1011 - 5x */ |
| 80, /* 1100 - 8x */ |
| 60, /* 1101 - 6x */ |
| 35, /* 1110 - 3.5x */ |
| 0 /* 1111 - off */ |
| }; |
| |
| static const int hid1_fx_multipliers_x_10[] = { |
| 00, /* 0000 - off */ |
| 00, /* 0001 - off */ |
| 10, /* 0010 - bypass */ |
| 10, /* 0011 - bypass */ |
| 20, /* 0100 - 2x */ |
| 25, /* 0101 - 2.5x */ |
| 30, /* 0110 - 3x */ |
| 35, /* 0111 - 3.5x */ |
| 40, /* 1000 - 4x */ |
| 45, /* 1001 - 4.5x */ |
| 50, /* 1010 - 5x */ |
| 55, /* 1011 - 5.5x */ |
| 60, /* 1100 - 6x */ |
| 65, /* 1101 - 6.5x */ |
| 70, /* 1110 - 7x */ |
| 75, /* 1111 - 7.5 */ |
| 80, /* 10000 - 8x */ |
| 85, /* 10001 - 8.5x */ |
| 90, /* 10010 - 9x */ |
| 95, /* 10011 - 9.5x */ |
| 100, /* 10100 - 10x */ |
| 110, /* 10101 - 11x */ |
| 120, /* 10110 - 12x */ |
| }; |
| |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* |
| * Measure CPU clock speed (core clock GCLK1, GCLK2) |
| * |
| * (Approx. GCLK frequency in Hz) |
| */ |
| |
| int get_clocks (void) |
| { |
| ulong clock = 0; |
| |
| /* calculate the clock frequency based upon the CPU type */ |
| switch (get_cpu_type()) { |
| case CPU_7455: |
| case CPU_7457: |
| /* |
| * It is assumed that the PLL_EXT line is zero. |
| * Make sure division is done before multiplication to prevent 32-bit |
| * arithmetic overflows which will cause a negative number |
| */ |
| clock = (CFG_BUS_CLK / 10) * hid1_multipliers_x_10[(get_hid1 () >> 13) & 0xF]; |
| break; |
| |
| case CPU_750GX: |
| case CPU_750FX: |
| clock = CFG_BUS_CLK * hid1_fx_multipliers_x_10[get_hid1 () >> 27] / 10; |
| break; |
| |
| case CPU_7450: |
| case CPU_740: |
| case CPU_740P: |
| case CPU_745: |
| case CPU_750CX: |
| case CPU_750: |
| case CPU_750P: |
| case CPU_755: |
| case CPU_7400: |
| case CPU_7410: |
| /* |
| * Make sure division is done before multiplication to prevent 32-bit |
| * arithmetic overflows which will cause a negative number |
| */ |
| clock = (CFG_BUS_CLK / 10) * hid1_multipliers_x_10[get_hid1 () >> 28]; |
| break; |
| |
| case CPU_UNKNOWN: |
| printf ("get_gclk_freq(): unknown CPU type\n"); |
| clock = 0; |
| return (1); |
| } |
| |
| gd->cpu_clk = clock; |
| gd->bus_clk = CFG_BUS_CLK; |
| |
| return (0); |
| } |
| |
| /* ------------------------------------------------------------------------- */ |