| /* |
| * Copyright (c) 2013 Qualcomm Atheros, Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * This file contains the configuration parameters for the pb93 board. |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include <configs/ar7240.h> |
| |
| #ifndef FLASH_SIZE |
| #define FLASH_SIZE 8 |
| #endif |
| /*----------------------------------------------------------------------- |
| * FLASH and environment organization |
| */ |
| #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #if (FLASH_SIZE == 16) |
| #define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ |
| #elif (FLASH_SIZE == 8) |
| #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ |
| #else |
| #define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ |
| #endif |
| |
| #define CFG_FLASH_SECTOR_SIZE (64*1024) |
| #if (FLASH_SIZE == 16) |
| #define CFG_FLASH_SIZE 0x01000000 /* Total flash size */ |
| #elif (FLASH_SIZE == 8) |
| #define CFG_FLASH_SIZE 0x00800000 /* max number of sectors on one chip */ |
| #else |
| #define CFG_FLASH_SIZE 0x00400000 /* Total flash size */ |
| #endif |
| |
| #ifndef COMPRESSED_UBOOT |
| #define ENABLE_DYNAMIC_CONF 1 |
| #endif |
| |
| #define CONFIG_WASP_SUPPORT 1 |
| #undef CFG_ATHRS26_PHY |
| |
| #if (CFG_MAX_FLASH_SECT * CFG_FLASH_SECTOR_SIZE) != CFG_FLASH_SIZE |
| # error "Invalid flash configuration" |
| #endif |
| |
| #define CFG_FLASH_WORD_SIZE unsigned short |
| |
| // Set this to zero, for 16bit ddr2 |
| #define DDR2_32BIT_SUPPORT 1 |
| |
| /* S16 specific defines */ |
| |
| #define CONFIG_AG7240_GE0_IS_CONNECTED 1 |
| |
| /* NOR Flash start address */ |
| #define CFG_FLASH_BASE 0x9f000000 |
| |
| #ifdef COMPRESSED_UBOOT |
| #define BOOTSTRAP_TEXT_BASE CFG_FLASH_BASE |
| #define BOOTSTRAP_CFG_MONITOR_BASE BOOTSTRAP_TEXT_BASE |
| #endif |
| |
| /* |
| * Defines to change flash size on reboot |
| */ |
| #ifdef ENABLE_DYNAMIC_CONF |
| #define UBOOT_FLASH_SIZE (256 * 1024) |
| #define UBOOT_ENV_SEC_START (CFG_FLASH_BASE + UBOOT_FLASH_SIZE) |
| |
| #define CFG_FLASH_MAGIC 0xaabacada |
| #define CFG_FLASH_MAGIC_F (UBOOT_ENV_SEC_START + CFG_FLASH_SECTOR_SIZE - 0x20) |
| #define CFG_FLASH_SECTOR_SIZE_F *(volatile int *)(CFG_FLASH_MAGIC_F + 0x4) |
| #define CFG_FLASH_SIZE_F *(volatile int *)(CFG_FLASH_MAGIC_F + 0x8) /* Total flash size */ |
| #define CFG_MAX_FLASH_SECT_F (CFG_FLASH_SIZE / CFG_FLASH_SECTOR_SIZE) /* max number of sectors on one chip */ |
| #else |
| #define CFG_FLASH_SIZE_F CFG_FLASH_SIZE |
| #define CFG_FLASH_SECTOR_SIZE_F CFG_FLASH_SECTOR_SIZE |
| #endif |
| |
| |
| /* |
| * The following #defines are needed to get flash environment right |
| */ |
| #define CFG_MONITOR_BASE TEXT_BASE |
| #define CFG_MONITOR_LEN (192 << 10) |
| |
| #undef CONFIG_BOOTARGS |
| |
| #if CONFIG_MI124 |
| #define BC "bc=mi124_f1e\0" |
| #endif |
| #if CONFIG_AP123 |
| #define BC "bc=ap123\0" |
| #endif |
| |
| #define __gen_cmd(n, a, f, ec, cc, el) \ |
| #n "=tftp 0x80060000 ${dir}" #f "&&" \ |
| #ec " " #a " " #el "&&" \ |
| #cc " $fileaddr " #a " $filesize\0" |
| |
| #define gen_cmd(n, a, f) \ |
| __gen_cmd(n, a, f, erase, cp.b, +$filesize) |
| |
| #define gen_cmd_el(n, a, f, el) \ |
| __gen_cmd(n, a, f, erase, cp.b, +el) |
| |
| #define nand_gen_cmd(n, a, f, s) \ |
| __gen_cmd(n, a, f, nand erase, nand write, s) |
| |
| #ifdef CONFIG_ATH_NAND_SUPPORT |
| # ifdef CONFIG_ATH_NAND_BR // nand boot rom |
| # define ATH_U_CMD nand_gen_cmd(lu, 0x0, 2fw.bin, 0x40000) |
| # define MTDPARTS_DEFAULT "mtdparts=ath-nand:256k(u-boot),256k(u-boot-env),1280k(uImage),7m(rootfs),128k(dummy),128k(caldata)" |
| # define ATH_ROOT_DEV "31:03" |
| # define CFG_ENV_ADDR 0x00040000 |
| # ifdef CONFIG_DB12X_HGW |
| # define MTDPARTS_DEFAULT "mtdparts=ath-nand:512k(u-boot),128k(u-boot-env),3m(uImage),15m(rootfs),128k(mib0),128k(caldata)" |
| # define CFG_ENV_ADDR 0x00080000 |
| # endif |
| # else //dual flash |
| # define ATH_U_CMD gen_cmd(lu, 0x9f000000, u-boot.bin) |
| # define MTDPARTS_DEFAULT "mtdparts=ath-nor0:320k(u-boot-and-env),6336k(free);ath-nand:256k(u-boot),256k(u-boot-env),1280k(uImage),7m(rootfs),128k(dummy),128k(caldata)" |
| # define ATH_ROOT_DEV "31:05" |
| # define CFG_ENV_ADDR 0x9f040000 |
| # endif |
| # ifdef CONFIG_DB12X_HGW |
| # define ATH_F_FILE db12x-hgw-nand-jffs2 |
| # define ATH_F_LEN 0xf00000 |
| # define ATH_F_ADDR 0x3a0000 |
| # define ATH_K_FILE vmlinux${bc}.lzma.uImage |
| # define ATH_K_ADDR 0xa0000 |
| # define ATH_F_CMD nand_gen_cmd(lf, ATH_F_ADDR, ATH_F_FILE, ATH_F_LEN) |
| # define ATH_K_CMD nand_gen_cmd(lk, ATH_K_ADDR, ATH_K_FILE, 0x140000) |
| # define ATH_EXTRA_ENV "bootdevice=0\0" |
| # define CONFIG_BOOTCOMMAND "nboot 0x81000000 0 0xa0000" |
| # else |
| # define ATH_F_FILE db12x${bc}-nand-jffs2 |
| # define ATH_F_LEN 0x700000 |
| # define ATH_F_ADDR 0x1c0000 |
| # define ATH_K_FILE vmlinux${bc}.lzma.uImage |
| # define ATH_K_ADDR 0x80000 |
| # define ATH_F_CMD nand_gen_cmd(lf, ATH_F_ADDR, ATH_F_FILE, ATH_F_LEN) |
| # define ATH_K_CMD nand_gen_cmd(lk, ATH_K_ADDR, ATH_K_FILE, 0x140000) |
| # define ATH_EXTRA_ENV "bootdevice=0\0" |
| # define CONFIG_BOOTCOMMAND "nboot 0x81000000 0 0x80000" |
| # endif |
| #elif defined(CONFIG_MI124) || defined(CONFIG_AP123) |
| # ifdef COMPRESSED_UBOOT |
| # define ATH_U_FILE tuboot.bin |
| # define ATH_F_FILE ${bc}-jffs2 |
| # define ATH_F_LEN $filesize |
| # define ATH_F_ADDR 0x9f010000 |
| # define ATH_K_FILE vmlinux_${bc}.lzma.uImage |
| # define ATH_K_ADDR 0x9f300000 |
| /* |
| * For compressed uboot, environment sector is not used. |
| * Hence the mtd partition indices get reduced by 1. |
| * This conflicts with |
| * - minor no. for /dev/caldata in |
| * build/scripts/{board}/dev.txt |
| * - root=<rooot dev> kernel cmdline parameter |
| * Hence, doing a dummy split of the u-boot partition |
| * to maintain the same minor no. as in the normal u-boot. |
| */ |
| # define MTDPARTS_DEFAULT "mtdparts=ath-nor0:32k(u-boot1),32k(u-boot2),3008k(rootfs),896k(uImage),64k(mib0),64k(ART)" |
| # else /* COMPRESSED_UBOOT */ |
| # define ATH_U_FILE u-boot.bin |
| # define ATH_F_FILE ${bc}-jffs2 |
| # define ATH_F_LEN $filesize |
| # define ATH_F_ADDR 0x9f050000 |
| # define ATH_K_FILE vmlinux_${bc}.lzma.uImage |
| # define ATH_K_ADDR 0x9f300000 |
| # define MTDPARTS_DEFAULT "mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),2752k(rootfs),896k(uImage),64k(mib0),64k(ART)" |
| # endif /* COMPRESSED_UBOOT */ |
| #elif defined(CONFIG_DB12X_P2P) |
| # define ATH_U_FILE u-boot.bin |
| # define ATH_F_FILE db12x-p2p${bc}-jffs2 |
| # define ATH_F_LEN 0x630000 |
| # define ATH_F_ADDR 0x9f050000 |
| # define ATH_K_FILE vmlinux${bc}.lzma.uImage |
| # define ATH_K_ADDR 0x9f680000 |
| # define MTDPARTS_DEFAULT "mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),64k(mib0),64k(ART)" |
| #else |
| # define ATH_U_FILE u-boot.bin |
| # define ATH_F_FILE db12x${bc}-jffs2 |
| # define ATH_F_LEN 0x630000 |
| # define ATH_F_ADDR 0x9f050000 |
| # define ATH_K_FILE vmlinux${bc}.lzma.uImage |
| # define ATH_K_ADDR 0x9f680000 |
| # define MTDPARTS_DEFAULT "mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),64k(mib0),64k(ART)" |
| #endif /*CONFIG_MI124*/ |
| |
| #ifndef ATH_ROOT_DEV |
| # define ATH_ROOT_DEV "31:02" |
| #endif |
| |
| #ifndef ATH_EXTRA_ENV |
| # define ATH_EXTRA_ENV |
| #endif |
| |
| #ifndef ATH_U_CMD |
| # define ATH_U_CMD gen_cmd(lu, 0x9f000000, ATH_U_FILE) |
| #endif |
| |
| #ifndef ATH_F_CMD |
| # define ATH_F_CMD gen_cmd_el(lf, ATH_F_ADDR, ATH_F_FILE, ATH_F_LEN) |
| #endif |
| |
| #ifndef ATH_K_CMD |
| # define ATH_K_CMD gen_cmd(lk, ATH_K_ADDR, ATH_K_FILE) |
| #endif |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "dir=\0" ATH_U_CMD ATH_F_CMD ATH_K_CMD "" |
| |
| #define CONFIG_BOOTARGS "console=ttyS0,115200 root=" ATH_ROOT_DEV " rootfstype=jffs2 init=/sbin/init " MTDPARTS_DEFAULT |
| |
| #undef CFG_PLL_FREQ |
| |
| //#define CFG_PLL_FREQ CFG_PLL_600_266_133 |
| //#define CFG_PLL_FREQ CFG_PLL_600_525_262 |
| //#define CFG_PLL_FREQ CFG_PLL_566_550_275 |
| //#define CFG_PLL_FREQ CFG_PLL_566_525_262 |
| //#define CFG_PLL_FREQ CFG_PLL_600_332_166 |
| //#define CFG_PLL_FREQ CFG_PLL_566_475_237 |
| //#define CFG_PLL_FREQ CFG_PLL_600_575_287 |
| //#define CFG_PLL_FREQ CFG_PLL_400_400_200 |
| //#define CFG_PLL_FREQ CFG_PLL_533_400_200 |
| //#define CFG_PLL_FREQ CFG_PLL_600_450_200 |
| //#define CFG_PLL_FREQ CFG_PLL_600_500_1G_250 |
| //#define CFG_PLL_FREQ CFG_PLL_600_550_1_1G_275 |
| //#define CFG_PLL_FREQ CFG_PLL_600_350_175 |
| //#define CFG_PLL_FREQ CFG_PLL_600_300_150 |
| //#define CFG_PLL_FREQ CFG_PLL_600_1_2G_400_200 |
| //#define CFG_PLL_FREQ CFG_PLL_300_300_150 |
| //#define CFG_PLL_FREQ CFG_PLL_500_400_200 |
| //#define CFG_PLL_FREQ CFG_PLL_400_200_200 |
| #if !defined(CONFIG_AP123) && !defined(CONFIG_MI124) |
| #define CFG_PLL_FREQ CFG_PLL_560_480_240 |
| #else |
| #define CFG_PLL_FREQ CFG_PLL_533_400_200 |
| #endif |
| |
| #undef CFG_HZ |
| /* |
| * MIPS32 24K Processor Core Family Software User's Manual |
| * |
| * 6.2.9 Count Register (CP0 Register 9, Select 0) |
| * The Count register acts as a timer, incrementing at a constant |
| * rate, whether or not an instruction is executed, retired, or |
| * any forward progress is made through the pipeline. The counter |
| * increments every other clock, if the DC bit in the Cause register |
| * is 0. |
| */ |
| /* Since the count is incremented every other tick, divide by 2 */ |
| /* XXX derive this from CFG_PLL_FREQ */ |
| #if (CFG_PLL_FREQ == CFG_PLL_200_200_100) |
| # define CFG_HZ (200000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_300_300_150) |
| # define CFG_HZ (300000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_350_350_175) |
| # define CFG_HZ (350000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_333_333_166) |
| # define CFG_HZ (333000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_266_266_133) |
| # define CFG_HZ (266000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_266_266_66) |
| # define CFG_HZ (266000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_400_400_200) || (CFG_PLL_FREQ == CFG_PLL_400_400_100) |
| # define CFG_HZ (400000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_320_320_80) || (CFG_PLL_FREQ == CFG_PLL_320_320_160) |
| # define CFG_HZ (320000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_410_400_200) |
| # define CFG_HZ (410000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_420_400_200) |
| # define CFG_HZ (420000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_240_240_120) |
| # define CFG_HZ (240000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_160_160_80) |
| # define CFG_HZ (160000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_400_200_200) |
| # define CFG_HZ (400000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_500_400_200) |
| # define CFG_HZ (500000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_600_400_200) || (CFG_PLL_FREQ == CFG_PLL_600_450_200) || \ |
| (CFG_PLL_FREQ == CFG_PLL_600_600_300) || (CFG_PLL_FREQ == CFG_PLL_600_550_275) || \ |
| (CFG_PLL_FREQ == CFG_PLL_600_332_166) || (CFG_PLL_FREQ == CFG_PLL_600_575_287) || \ |
| (CFG_PLL_FREQ == CFG_PLL_600_525_262) || (CFG_PLL_FREQ == CFG_PLL_600_332_200) || \ |
| (CFG_PLL_FREQ == CFG_PLL_600_266_133) || (CFG_PLL_FREQ == CFG_PLL_600_266_200) || \ |
| (CFG_PLL_FREQ == CFG_PLL_600_650_325) || (CFG_PLL_FREQ == CFG_PLL_600_1_2G_400_200) |
| # define CFG_HZ (600000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_600_1_2G_400_200) |
| # define CFG_HZ (600000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_600_500_1G_250) |
| # define CFG_HZ (600000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_600_550_1_1G_275) |
| # define CFG_HZ (600000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_600_500_250) |
| # define CFG_HZ (600000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_600_350_175) |
| # define CFG_HZ (600000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_600_300_150) |
| # define CFG_HZ (600000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_533_400_200) || (CFG_PLL_FREQ == CFG_PLL_533_500_250) |
| # define CFG_HZ (533000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_700_400_200) |
| # define CFG_HZ (700000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_650_600_300) |
| # define CFG_HZ (650000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_560_480_240) |
| # define CFG_HZ (560000000/2) |
| #elif (CFG_PLL_FREQ == CFG_PLL_566_475_237) || (CFG_PLL_FREQ == CFG_PLL_566_450_225) || \ |
| (CFG_PLL_FREQ == CFG_PLL_566_550_275) || (CFG_PLL_FREQ == CFG_PLL_566_525_262) || \ |
| (CFG_PLL_FREQ == CFG_PLL_566_400_200) || (CFG_PLL_FREQ == CFG_PLL_566_500_250) |
| # define CFG_HZ (566000000/2) |
| #endif |
| |
| /* |
| * timeout values are in ticks |
| */ |
| #define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */ |
| #define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */ |
| |
| /* |
| * Cache lock for stack |
| */ |
| #define CFG_INIT_SP_OFFSET 0x1000 |
| #define CFG_INIT_SRAM_SP_OFFSET 0xbd007000 |
| |
| #ifndef CONFIG_ATH_NAND_SUPPORT |
| # define CFG_ENV_ADDR 0x9f040000 |
| # if (FLASH_SIZE == 16) |
| # define CONFIG_BOOTCOMMAND "bootm 0x9f550000" |
| # else /* FLASH_SIZE == 16 */ |
| # ifdef COMPRESSED_UBOOT |
| # if (FLASH_SIZE == 4) |
| # define CONFIG_BOOTCOMMAND "bootm 0x9f300000" |
| # else /* FLASH_SIZE == 4 */ |
| # define CONFIG_BOOTCOMMAND "bootm 0x9f320000" |
| # endif /* FLASH_SIZE == 4 */ |
| # else /* COMPRESSED_UBOOT */ |
| # if defined(CONFIG_MI124) || defined(CONFIG_AP123) |
| # define CONFIG_BOOTCOMMAND "bootm 0x9f300000" |
| # else |
| # define CONFIG_BOOTCOMMAND "bootm 0x9f680000" |
| # endif |
| # endif /* COMPRESSED_UBOOT */ |
| # endif /* FLASH_SIZE == 16 */ |
| #endif |
| |
| |
| |
| //#define CONFIG_FLASH_16BIT |
| |
| /* DDR init values */ |
| |
| #define CONFIG_NR_DRAM_BANKS 2 |
| |
| /* DDR settings for WASP */ |
| |
| #define CFG_DDR_REFRESH_VAL 0x4270 |
| #define CFG_DDR_CONFIG_VAL 0xc7bc8cd0 |
| #define CFG_DDR_MODE_VAL_INIT 0x133 |
| #define CFG_DDR_EXT_MODE_VAL 0x0 |
| #define CFG_DDR_MODE_VAL 0x33 |
| |
| #define CFG_DDR_TRTW_VAL 0x1f |
| #define CFG_DDR_TWTR_VAL 0x1e |
| |
| #define CFG_DDR_CONFIG2_VAL 0x9dd0e6a8 |
| |
| |
| |
| #define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_32 0xff |
| #define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_16 0xffff |
| |
| #if DDR2_32BIT_SUPPORT |
| #define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_32 |
| #else |
| #define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_16 |
| #endif |
| |
| #define CFG_DDR1_RD_DATA_THIS_CYCLE_VAL 0xffff |
| #define CFG_SDRAM_RD_DATA_THIS_CYCLE_VAL 0xffffffff |
| |
| /* DDR2 Init values */ |
| #define CFG_DDR2_EXT_MODE_VAL 0x402 |
| |
| |
| #ifdef ENABLE_DYNAMIC_CONF |
| #define CFG_DDR_MAGIC 0xaabacada |
| #define CFG_DDR_MAGIC_F (UBOOT_ENV_SEC_START + CFG_FLASH_SECTOR_SIZE - 0x30) |
| #define CFG_DDR_CONFIG_VAL_F *(volatile int *)(CFG_DDR_MAGIC_F + 4) |
| #define CFG_DDR_CONFIG2_VAL_F *(volatile int *)(CFG_DDR_MAGIC_F + 8) |
| #define CFG_DDR_EXT_MODE_VAL_F *(volatile int *)(CFG_DDR_MAGIC_F + 12) |
| #endif |
| |
| #define CONFIG_NET_MULTI |
| #define CONFIG_MEMSIZE_IN_BYTES |
| #define CONFIG_PCI 1 |
| |
| /*----------------------------------------------------------------------- |
| * Cache Configuration |
| */ |
| #ifndef COMPRESSED_UBOOT |
| #define ATH_CFG_COMMANDS (( \ |
| CONFIG_CMD_DFL | \ |
| CFG_CMD_DHCP | \ |
| CFG_CMD_ELF | \ |
| CFG_CMD_PCI | \ |
| CFG_CMD_FLS | \ |
| CFG_CMD_MII | \ |
| CFG_CMD_PING | \ |
| CFG_CMD_NET | \ |
| CFG_CMD_ENV | \ |
| CFG_CMD_PLL | \ |
| CFG_CMD_FLASH | \ |
| CFG_CMD_RUN | \ |
| CFG_CMD_ELF | \ |
| CFG_CMD_DDR | \ |
| CFG_CMD_ETHREG \ |
| ) & ~( \ |
| CFG_CMD_IMLS | \ |
| CFG_CMD_FLASH \ |
| )) |
| #else |
| #define ATH_CFG_COMMANDS (CONFIG_CMD_DFL | \ |
| CFG_CMD_PING | \ |
| CFG_CMD_NET) |
| #endif /* #ifndef COMPRESSED_UBOOT */ |
| |
| #ifdef CONFIG_ATH_NAND_SUPPORT |
| # ifdef CONFIG_ATH_NAND_BR |
| # define CFG_ENV_IS_IN_NAND 1 |
| # define CFG_ENV_OFFSET 0x40000u |
| # define CFG_ENV_SIZE 0x40000u |
| # ifdef CONFIG_DB12X_HGW |
| # define CFG_ENV_OFFSET 0x80000u |
| # define CFG_ENV_SIZE 0x20000u |
| # endif |
| # define ATH_EXTRA_CMD CFG_CMD_NAND |
| # else |
| # define CFG_ENV_IS_IN_FLASH 1 |
| # define CFG_ENV_SIZE CFG_FLASH_SECTOR_SIZE |
| # define ATH_EXTRA_CMD (CFG_CMD_NAND | CFG_CMD_FLASH) |
| # endif |
| # define NAND_MAX_CHIPS 1 |
| # define CFG_MAX_NAND_DEVICE 1 |
| #else |
| # define ATH_EXTRA_CMD CFG_CMD_FLASH |
| # define CFG_ENV_IS_IN_FLASH 1 |
| # define CFG_ENV_SIZE CFG_FLASH_SECTOR_SIZE |
| #endif |
| |
| #define DEBUG |
| |
| #ifdef COMPRESSED_UBOOT |
| #undef CFG_ENV_IS_IN_FLASH |
| #undef CFG_ENV_IS_IN_NAND |
| #define CFG_ENV_IS_NOWHERE 1 |
| #endif |
| |
| #define CONFIG_COMMANDS (ATH_CFG_COMMANDS | ATH_EXTRA_CMD) |
| |
| #define CONFIG_IPADDR 192.168.1.1 |
| #define CONFIG_SERVERIP 192.168.1.10 |
| #define CONFIG_ETHADDR 0x00:0xaa:0xbb:0xcc:0xdd:0xee |
| #define CFG_FAULT_ECHO_LINK_DOWN 1 |
| |
| |
| #define CFG_PHY_ADDR 0 |
| #define CFG_GMII 0 |
| #define CFG_MII0_RMII 1 |
| #define CFG_AG7100_GE0_RMII 1 |
| |
| #define CFG_BOOTM_LEN (16 << 20) /* 16 MB */ |
| #define CFG_HUSH_PARSER |
| #define CFG_PROMPT_HUSH_PS2 "hush>" |
| |
| /* |
| ** Parameters defining the location of the calibration/initialization |
| ** information for the two Merlin devices. |
| ** NOTE: **This will change with different flash configurations** |
| */ |
| |
| #define WLANCAL 0x9fff1000 |
| #define BOARDCAL 0x9fff0000 |
| #define ATHEROS_PRODUCT_ID 137 |
| #define CAL_SECTOR (CFG_MAX_FLASH_SECT - 1) |
| |
| /* For Merlin, both PCI, PCI-E interfaces are valid */ |
| #define AR7240_ART_PCICFG_OFFSET 12 |
| |
| #include <cmd_confdefs.h> |
| |
| #endif /* __CONFIG_H */ |
