| /* |
| * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Andreas Heppel <aheppel@sysgo.de> |
| * |
| * (C) Copyright 2002, 2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * PCI routines |
| */ |
| |
| #include <common.h> |
| |
| #ifdef CONFIG_PCI |
| |
| #include <command.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <pci.h> |
| |
| #define PCI_HOSE_OP(rw, size, type) \ |
| int pci_hose_##rw##_config_##size(struct pci_controller *hose, \ |
| pci_dev_t dev, \ |
| int offset, type value) \ |
| { \ |
| return hose->rw##_##size(hose, dev, offset, value); \ |
| } |
| |
| PCI_HOSE_OP(read, byte, u8 *) |
| PCI_HOSE_OP(read, word, u16 *) |
| PCI_HOSE_OP(read, dword, u32 *) |
| PCI_HOSE_OP(write, byte, u8) |
| PCI_HOSE_OP(write, word, u16) |
| PCI_HOSE_OP(write, dword, u32) |
| |
| #ifndef CONFIG_IXP425 |
| #define PCI_OP(rw, size, type, error_code) \ |
| int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value) \ |
| { \ |
| struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev)); \ |
| \ |
| if (!hose) \ |
| { \ |
| error_code; \ |
| return -1; \ |
| } \ |
| \ |
| return pci_hose_##rw##_config_##size(hose, dev, offset, value); \ |
| } |
| |
| PCI_OP(read, byte, u8 *, *value = 0xff) |
| PCI_OP(read, word, u16 *, *value = 0xffff) |
| PCI_OP(read, dword, u32 *, *value = 0xffffffff) |
| PCI_OP(write, byte, u8, ) |
| PCI_OP(write, word, u16, ) |
| PCI_OP(write, dword, u32, ) |
| #endif /* CONFIG_IXP425 */ |
| |
| #define PCI_READ_VIA_DWORD_OP(size, type, off_mask) \ |
| int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\ |
| pci_dev_t dev, \ |
| int offset, type val) \ |
| { \ |
| u32 val32; \ |
| \ |
| if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\ |
| return -1; \ |
| \ |
| *val = (val32 >> ((offset & (int)off_mask) * 8)); \ |
| \ |
| return 0; \ |
| } |
| |
| #define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask) \ |
| int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\ |
| pci_dev_t dev, \ |
| int offset, type val) \ |
| { \ |
| u32 val32, mask, ldata, shift; \ |
| \ |
| if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\ |
| return -1; \ |
| \ |
| shift = ((offset & (int)off_mask) * 8); \ |
| ldata = (((unsigned long)val) & val_mask) << shift; \ |
| mask = val_mask << shift; \ |
| val32 = (val32 & ~mask) | ldata; \ |
| \ |
| if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0)\ |
| return -1; \ |
| \ |
| return 0; \ |
| } |
| |
| PCI_READ_VIA_DWORD_OP(byte, u8 *, 0x03) |
| PCI_READ_VIA_DWORD_OP(word, u16 *, 0x02) |
| PCI_WRITE_VIA_DWORD_OP(byte, u8, 0x03, 0x000000ff) |
| PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff) |
| |
| /* |
| * |
| */ |
| |
| static struct pci_controller* hose_head = NULL; |
| |
| void pci_register_hose(struct pci_controller* hose) |
| { |
| struct pci_controller **phose = &hose_head; |
| |
| while(*phose) |
| phose = &(*phose)->next; |
| |
| hose->next = NULL; |
| |
| *phose = hose; |
| } |
| |
| struct pci_controller *pci_bus_to_hose (int bus) |
| { |
| struct pci_controller *hose; |
| |
| for (hose = hose_head; hose; hose = hose->next) |
| if (bus >= hose->first_busno && bus <= hose->last_busno) |
| return hose; |
| |
| printf("pci_bus_to_hose() failed\n"); |
| return NULL; |
| } |
| |
| #ifndef CONFIG_IXP425 |
| pci_dev_t pci_find_devices(struct pci_device_id *ids, int index) |
| { |
| struct pci_controller * hose; |
| u16 vendor, device; |
| u8 header_type; |
| pci_dev_t bdf; |
| int i, bus, found_multi = 0; |
| |
| for (hose = hose_head; hose; hose = hose->next) |
| { |
| #ifdef CFG_SCSI_SCAN_BUS_REVERSE |
| for (bus = hose->last_busno; bus >= hose->first_busno; bus--) |
| #else |
| for (bus = hose->first_busno; bus <= hose->last_busno; bus++) |
| #endif |
| for (bdf = PCI_BDF(bus,0,0); |
| #ifdef CONFIG_ELPPC |
| bdf < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); |
| #else |
| bdf < PCI_BDF(bus+1,0,0); |
| #endif |
| bdf += PCI_BDF(0,0,1)) |
| { |
| if (!PCI_FUNC(bdf)) { |
| pci_read_config_byte(bdf, |
| PCI_HEADER_TYPE, |
| &header_type); |
| |
| found_multi = header_type & 0x80; |
| } else { |
| if (!found_multi) |
| continue; |
| } |
| |
| pci_read_config_word(bdf, |
| PCI_VENDOR_ID, |
| &vendor); |
| pci_read_config_word(bdf, |
| PCI_DEVICE_ID, |
| &device); |
| |
| for (i=0; ids[i].vendor != 0; i++) |
| if (vendor == ids[i].vendor && |
| device == ids[i].device) |
| { |
| if (index <= 0) |
| return bdf; |
| |
| index--; |
| } |
| } |
| } |
| |
| return (-1); |
| } |
| #endif /* CONFIG_IXP425 */ |
| |
| pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index) |
| { |
| static struct pci_device_id ids[2] = {{}, {0, 0}}; |
| |
| ids[0].vendor = vendor; |
| ids[0].device = device; |
| |
| return pci_find_devices(ids, index); |
| } |
| |
| /* |
| * |
| */ |
| |
| unsigned long pci_hose_phys_to_bus (struct pci_controller *hose, |
| unsigned long phys_addr, |
| unsigned long flags) |
| { |
| struct pci_region *res; |
| unsigned long bus_addr; |
| int i; |
| |
| if (!hose) { |
| printf ("pci_hose_phys_to_bus: %s\n", "invalid hose"); |
| goto Done; |
| } |
| |
| for (i = 0; i < hose->region_count; i++) { |
| res = &hose->regions[i]; |
| |
| if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0) |
| continue; |
| |
| bus_addr = phys_addr - res->phys_start + res->bus_start; |
| |
| if (bus_addr >= res->bus_start && |
| bus_addr < res->bus_start + res->size) { |
| return bus_addr; |
| } |
| } |
| |
| printf ("pci_hose_phys_to_bus: %s\n", "invalid physical address"); |
| |
| Done: |
| return 0; |
| } |
| |
| unsigned long pci_hose_bus_to_phys(struct pci_controller* hose, |
| unsigned long bus_addr, |
| unsigned long flags) |
| { |
| struct pci_region *res; |
| int i; |
| |
| if (!hose) { |
| printf ("pci_hose_bus_to_phys: %s\n", "invalid hose"); |
| goto Done; |
| } |
| |
| for (i = 0; i < hose->region_count; i++) { |
| res = &hose->regions[i]; |
| |
| if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0) |
| continue; |
| |
| if (bus_addr >= res->bus_start && |
| bus_addr < res->bus_start + res->size) { |
| return bus_addr - res->bus_start + res->phys_start; |
| } |
| } |
| |
| printf ("pci_hose_bus_to_phys: %s\n", "invalid physical address"); |
| |
| Done: |
| return 0; |
| } |
| |
| /* |
| * |
| */ |
| |
| int pci_hose_config_device(struct pci_controller *hose, |
| pci_dev_t dev, |
| unsigned long io, |
| unsigned long mem, |
| unsigned long command) |
| { |
| unsigned int bar_response, bar_size, bar_value, old_command; |
| unsigned char pin; |
| int bar, found_mem64; |
| |
| debug ("PCI Config: I/O=0x%lx, Memory=0x%lx, Command=0x%lx\n", |
| io, mem, command); |
| |
| pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0); |
| |
| for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_5; bar += 4) { |
| pci_hose_write_config_dword (hose, dev, bar, 0xffffffff); |
| pci_hose_read_config_dword (hose, dev, bar, &bar_response); |
| |
| if (!bar_response) |
| continue; |
| |
| found_mem64 = 0; |
| |
| /* Check the BAR type and set our address mask */ |
| if (bar_response & PCI_BASE_ADDRESS_SPACE) { |
| bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1; |
| /* round up region base address to a multiple of size */ |
| io = ((io - 1) | (bar_size - 1)) + 1; |
| bar_value = io; |
| /* compute new region base address */ |
| io = io + bar_size; |
| } else { |
| if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == |
| PCI_BASE_ADDRESS_MEM_TYPE_64) |
| found_mem64 = 1; |
| |
| bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1; |
| |
| /* round up region base address to multiple of size */ |
| mem = ((mem - 1) | (bar_size - 1)) + 1; |
| bar_value = mem; |
| /* compute new region base address */ |
| mem = mem + bar_size; |
| } |
| |
| /* Write it out and update our limit */ |
| pci_hose_write_config_dword (hose, dev, bar, bar_value); |
| |
| if (found_mem64) { |
| bar += 4; |
| pci_hose_write_config_dword (hose, dev, bar, 0x00000000); |
| } |
| } |
| |
| /* Configure Cache Line Size Register */ |
| pci_hose_write_config_byte (hose, dev, PCI_CACHE_LINE_SIZE, 0x08); |
| |
| /* Configure Latency Timer */ |
| pci_hose_write_config_byte (hose, dev, PCI_LATENCY_TIMER, 0x80); |
| |
| /* Disable interrupt line, if device says it wants to use interrupts */ |
| pci_hose_read_config_byte (hose, dev, PCI_INTERRUPT_PIN, &pin); |
| if (pin != 0) { |
| pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, 0xff); |
| } |
| |
| pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &old_command); |
| pci_hose_write_config_dword (hose, dev, PCI_COMMAND, |
| (old_command & 0xffff0000) | command); |
| |
| return 0; |
| } |
| |
| /* |
| * |
| */ |
| |
| struct pci_config_table *pci_find_config(struct pci_controller *hose, |
| unsigned short class, |
| unsigned int vendor, |
| unsigned int device, |
| unsigned int bus, |
| unsigned int dev, |
| unsigned int func) |
| { |
| struct pci_config_table *table; |
| |
| for (table = hose->config_table; table && table->vendor; table++) { |
| if ((table->vendor == PCI_ANY_ID || table->vendor == vendor) && |
| (table->device == PCI_ANY_ID || table->device == device) && |
| (table->class == PCI_ANY_ID || table->class == class) && |
| (table->bus == PCI_ANY_ID || table->bus == bus) && |
| (table->dev == PCI_ANY_ID || table->dev == dev) && |
| (table->func == PCI_ANY_ID || table->func == func)) { |
| return table; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| void pci_cfgfunc_config_device(struct pci_controller *hose, |
| pci_dev_t dev, |
| struct pci_config_table *entry) |
| { |
| pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1], entry->priv[2]); |
| } |
| |
| void pci_cfgfunc_do_nothing(struct pci_controller *hose, |
| pci_dev_t dev, struct pci_config_table *entry) |
| { |
| } |
| |
| /* |
| * |
| */ |
| |
| /* HJF: Changed this to return int. I think this is required |
| * to get the correct result when scanning bridges |
| */ |
| extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); |
| extern void pciauto_config_init(struct pci_controller *hose); |
| |
| int pci_hose_scan_bus(struct pci_controller *hose, int bus) |
| { |
| unsigned int sub_bus, found_multi=0; |
| unsigned short vendor, device, class; |
| unsigned char header_type; |
| struct pci_config_table *cfg; |
| pci_dev_t dev; |
| |
| sub_bus = bus; |
| |
| for (dev = PCI_BDF(bus,0,0); |
| dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); |
| dev += PCI_BDF(0,0,1)) |
| { |
| /* Skip our host bridge */ |
| if ( dev == PCI_BDF(hose->first_busno,0,0) ) { |
| #if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */ |
| /* |
| * Only skip hostbridge configuration if "pciconfighost" is not set |
| */ |
| if (getenv("pciconfighost") == NULL) { |
| continue; /* Skip our host bridge */ |
| } |
| #else |
| continue; /* Skip our host bridge */ |
| #endif |
| } |
| |
| if (PCI_FUNC(dev) && !found_multi) |
| continue; |
| |
| pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type); |
| |
| pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor); |
| |
| if (vendor != 0xffff && vendor != 0x0000) { |
| |
| if (!PCI_FUNC(dev)) |
| found_multi = header_type & 0x80; |
| |
| debug ("PCI Scan: Found Bus %d, Device %d, Function %d\n", |
| PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev) ); |
| |
| pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device); |
| pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class); |
| |
| cfg = pci_find_config(hose, class, vendor, device, |
| PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev)); |
| if (cfg) { |
| cfg->config_device(hose, dev, cfg); |
| sub_bus = max(sub_bus, hose->current_busno); |
| #ifdef CONFIG_PCI_PNP |
| } else { |
| int n = pciauto_config_device(hose, dev); |
| |
| sub_bus = max(sub_bus, n); |
| #endif |
| } |
| if (hose->fixup_irq) |
| hose->fixup_irq(hose, dev); |
| |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| /* Skip our host bridge */ |
| if ( dev != PCI_BDF(hose->first_busno,0,0) ) { |
| unsigned char int_line; |
| |
| pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE, |
| &int_line); |
| printf(" %02x %02x %04x %04x %04x %02x\n", |
| PCI_BUS(dev), PCI_DEV(dev), vendor, device, class, |
| int_line); |
| } |
| #endif |
| } |
| } |
| |
| return sub_bus; |
| } |
| |
| int pci_hose_scan(struct pci_controller *hose) |
| { |
| #ifdef CONFIG_PCI_PNP |
| pciauto_config_init(hose); |
| #endif |
| return pci_hose_scan_bus(hose, hose->first_busno); |
| } |
| |
| void pci_init(void) |
| { |
| #if defined(CONFIG_PCI_BOOTDELAY) |
| char *s; |
| int i; |
| |
| /* wait "pcidelay" ms (if defined)... */ |
| s = getenv ("pcidelay"); |
| if (s) { |
| int val = simple_strtoul (s, NULL, 10); |
| for (i=0; i<val; i++) |
| udelay (1000); |
| } |
| #endif /* CONFIG_PCI_BOOTDELAY */ |
| |
| /* now call board specific pci_init()... */ |
| pci_init_board(); |
| } |
| |
| #endif /* CONFIG_PCI */ |