| /* DO NOT EDIT THIS FILE |
| * Automatically generated by generate-def-headers.xsl |
| * DO NOT EDIT THIS FILE |
| */ |
| |
| #ifndef __BFIN_DEF_ADSP_BF526_proc__ |
| #define __BFIN_DEF_ADSP_BF526_proc__ |
| |
| #include "../mach-common/ADSP-EDN-core_def.h" |
| |
| #include "ADSP-EDN-BF52x-extended_def.h" |
| |
| #define PLL_CTL 0xFFC00000 /* PLL Control Register */ |
| #define PLL_DIV 0xFFC00004 /* PLL Divide Register */ |
| #define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ |
| #define PLL_STAT 0xFFC0000C /* PLL Status Register */ |
| #define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ |
| #define CHIPID 0xFFC00014 |
| #define SWRST 0xFFC00100 /* Software Reset Register */ |
| #define SYSCR 0xFFC00104 /* System Configuration register */ |
| #define SRAM_BASE_ADDR 0xFFE00000 /* SRAM Base Address (Read Only) */ |
| #define DMEM_CONTROL 0xFFE00004 /* Data memory control */ |
| #define DCPLB_STATUS 0xFFE00008 /* Data Cache Programmable Look-Aside Buffer Status */ |
| #define DCPLB_FAULT_ADDR 0xFFE0000C /* Data Cache Programmable Look-Aside Buffer Fault Address */ |
| #define DCPLB_ADDR0 0xFFE00100 /* Data Cache Protection Lookaside Buffer 0 */ |
| #define DCPLB_ADDR1 0xFFE00104 /* Data Cache Protection Lookaside Buffer 1 */ |
| #define DCPLB_ADDR2 0xFFE00108 /* Data Cache Protection Lookaside Buffer 2 */ |
| #define DCPLB_ADDR3 0xFFE0010C /* Data Cache Protection Lookaside Buffer 3 */ |
| #define DCPLB_ADDR4 0xFFE00110 /* Data Cache Protection Lookaside Buffer 4 */ |
| #define DCPLB_ADDR5 0xFFE00114 /* Data Cache Protection Lookaside Buffer 5 */ |
| #define DCPLB_ADDR6 0xFFE00118 /* Data Cache Protection Lookaside Buffer 6 */ |
| #define DCPLB_ADDR7 0xFFE0011C /* Data Cache Protection Lookaside Buffer 7 */ |
| #define DCPLB_ADDR8 0xFFE00120 /* Data Cache Protection Lookaside Buffer 8 */ |
| #define DCPLB_ADDR9 0xFFE00124 /* Data Cache Protection Lookaside Buffer 9 */ |
| #define DCPLB_ADDR10 0xFFE00128 /* Data Cache Protection Lookaside Buffer 10 */ |
| #define DCPLB_ADDR11 0xFFE0012C /* Data Cache Protection Lookaside Buffer 11 */ |
| #define DCPLB_ADDR12 0xFFE00130 /* Data Cache Protection Lookaside Buffer 12 */ |
| #define DCPLB_ADDR13 0xFFE00134 /* Data Cache Protection Lookaside Buffer 13 */ |
| #define DCPLB_ADDR14 0xFFE00138 /* Data Cache Protection Lookaside Buffer 14 */ |
| #define DCPLB_ADDR15 0xFFE0013C /* Data Cache Protection Lookaside Buffer 15 */ |
| #define DCPLB_DATA0 0xFFE00200 /* Data Cache 0 Status */ |
| #define DCPLB_DATA1 0xFFE00204 /* Data Cache 1 Status */ |
| #define DCPLB_DATA2 0xFFE00208 /* Data Cache 2 Status */ |
| #define DCPLB_DATA3 0xFFE0020C /* Data Cache 3 Status */ |
| #define DCPLB_DATA4 0xFFE00210 /* Data Cache 4 Status */ |
| #define DCPLB_DATA5 0xFFE00214 /* Data Cache 5 Status */ |
| #define DCPLB_DATA6 0xFFE00218 /* Data Cache 6 Status */ |
| #define DCPLB_DATA7 0xFFE0021C /* Data Cache 7 Status */ |
| #define DCPLB_DATA8 0xFFE00220 /* Data Cache 8 Status */ |
| #define DCPLB_DATA9 0xFFE00224 /* Data Cache 9 Status */ |
| #define DCPLB_DATA10 0xFFE00228 /* Data Cache 10 Status */ |
| #define DCPLB_DATA11 0xFFE0022C /* Data Cache 11 Status */ |
| #define DCPLB_DATA12 0xFFE00230 /* Data Cache 12 Status */ |
| #define DCPLB_DATA13 0xFFE00234 /* Data Cache 13 Status */ |
| #define DCPLB_DATA14 0xFFE00238 /* Data Cache 14 Status */ |
| #define DCPLB_DATA15 0xFFE0023C /* Data Cache 15 Status */ |
| #define DTEST_COMMAND 0xFFE00300 /* Data Test Command Register */ |
| #define DTEST_DATA0 0xFFE00400 /* Data Test Data Register */ |
| #define DTEST_DATA1 0xFFE00404 /* Data Test Data Register */ |
| #define IMEM_CONTROL 0xFFE01004 /* Instruction Memory Control */ |
| #define ICPLB_STATUS 0xFFE01008 /* Instruction Cache Programmable Look-Aside Buffer Status */ |
| #define ICPLB_FAULT_ADDR 0xFFE0100C /* Instruction Cache Programmable Look-Aside Buffer Fault Address */ |
| #define ICPLB_ADDR0 0xFFE01100 /* Instruction Cacheability Protection Lookaside Buffer 0 */ |
| #define ICPLB_ADDR1 0xFFE01104 /* Instruction Cacheability Protection Lookaside Buffer 1 */ |
| #define ICPLB_ADDR2 0xFFE01108 /* Instruction Cacheability Protection Lookaside Buffer 2 */ |
| #define ICPLB_ADDR3 0xFFE0110C /* Instruction Cacheability Protection Lookaside Buffer 3 */ |
| #define ICPLB_ADDR4 0xFFE01110 /* Instruction Cacheability Protection Lookaside Buffer 4 */ |
| #define ICPLB_ADDR5 0xFFE01114 /* Instruction Cacheability Protection Lookaside Buffer 5 */ |
| #define ICPLB_ADDR6 0xFFE01118 /* Instruction Cacheability Protection Lookaside Buffer 6 */ |
| #define ICPLB_ADDR7 0xFFE0111C /* Instruction Cacheability Protection Lookaside Buffer 7 */ |
| #define ICPLB_ADDR8 0xFFE01120 /* Instruction Cacheability Protection Lookaside Buffer 8 */ |
| #define ICPLB_ADDR9 0xFFE01124 /* Instruction Cacheability Protection Lookaside Buffer 9 */ |
| #define ICPLB_ADDR10 0xFFE01128 /* Instruction Cacheability Protection Lookaside Buffer 10 */ |
| #define ICPLB_ADDR11 0xFFE0112C /* Instruction Cacheability Protection Lookaside Buffer 11 */ |
| #define ICPLB_ADDR12 0xFFE01130 /* Instruction Cacheability Protection Lookaside Buffer 12 */ |
| #define ICPLB_ADDR13 0xFFE01134 /* Instruction Cacheability Protection Lookaside Buffer 13 */ |
| #define ICPLB_ADDR14 0xFFE01138 /* Instruction Cacheability Protection Lookaside Buffer 14 */ |
| #define ICPLB_ADDR15 0xFFE0113C /* Instruction Cacheability Protection Lookaside Buffer 15 */ |
| #define ICPLB_DATA0 0xFFE01200 /* Instruction Cache 0 Status */ |
| #define ICPLB_DATA1 0xFFE01204 /* Instruction Cache 1 Status */ |
| #define ICPLB_DATA2 0xFFE01208 /* Instruction Cache 2 Status */ |
| #define ICPLB_DATA3 0xFFE0120C /* Instruction Cache 3 Status */ |
| #define ICPLB_DATA4 0xFFE01210 /* Instruction Cache 4 Status */ |
| #define ICPLB_DATA5 0xFFE01214 /* Instruction Cache 5 Status */ |
| #define ICPLB_DATA6 0xFFE01218 /* Instruction Cache 6 Status */ |
| #define ICPLB_DATA7 0xFFE0121C /* Instruction Cache 7 Status */ |
| #define ICPLB_DATA8 0xFFE01220 /* Instruction Cache 8 Status */ |
| #define ICPLB_DATA9 0xFFE01224 /* Instruction Cache 9 Status */ |
| #define ICPLB_DATA10 0xFFE01228 /* Instruction Cache 10 Status */ |
| #define ICPLB_DATA11 0xFFE0122C /* Instruction Cache 11 Status */ |
| #define ICPLB_DATA12 0xFFE01230 /* Instruction Cache 12 Status */ |
| #define ICPLB_DATA13 0xFFE01234 /* Instruction Cache 13 Status */ |
| #define ICPLB_DATA14 0xFFE01238 /* Instruction Cache 14 Status */ |
| #define ICPLB_DATA15 0xFFE0123C /* Instruction Cache 15 Status */ |
| #define ITEST_COMMAND 0xFFE01300 /* Instruction Test Command Register */ |
| #define ITEST_DATA0 0xFFE01400 /* Instruction Test Data Register */ |
| #define ITEST_DATA1 0xFFE01404 /* Instruction Test Data Register */ |
| #define EVT0 0xFFE02000 /* Event Vector 0 ESR Address */ |
| #define EVT1 0xFFE02004 /* Event Vector 1 ESR Address */ |
| #define EVT2 0xFFE02008 /* Event Vector 2 ESR Address */ |
| #define EVT3 0xFFE0200C /* Event Vector 3 ESR Address */ |
| #define EVT4 0xFFE02010 /* Event Vector 4 ESR Address */ |
| #define EVT5 0xFFE02014 /* Event Vector 5 ESR Address */ |
| #define EVT6 0xFFE02018 /* Event Vector 6 ESR Address */ |
| #define EVT7 0xFFE0201C /* Event Vector 7 ESR Address */ |
| #define EVT8 0xFFE02020 /* Event Vector 8 ESR Address */ |
| #define EVT9 0xFFE02024 /* Event Vector 9 ESR Address */ |
| #define EVT10 0xFFE02028 /* Event Vector 10 ESR Address */ |
| #define EVT11 0xFFE0202C /* Event Vector 11 ESR Address */ |
| #define EVT12 0xFFE02030 /* Event Vector 12 ESR Address */ |
| #define EVT13 0xFFE02034 /* Event Vector 13 ESR Address */ |
| #define EVT14 0xFFE02038 /* Event Vector 14 ESR Address */ |
| #define EVT15 0xFFE0203C /* Event Vector 15 ESR Address */ |
| #define ILAT 0xFFE0210C /* Interrupt Latch Register */ |
| #define IMASK 0xFFE02104 /* Interrupt Mask Register */ |
| #define IPEND 0xFFE02108 /* Interrupt Pending Register */ |
| #define IPRIO 0xFFE02110 /* Interrupt Priority Register */ |
| #define TCNTL 0xFFE03000 /* Core Timer Control Register */ |
| #define TPERIOD 0xFFE03004 /* Core Timer Period Register */ |
| #define TSCALE 0xFFE03008 /* Core Timer Scale Register */ |
| #define TCOUNT 0xFFE0300C /* Core Timer Count Register */ |
| #define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ |
| #define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ |
| #define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ |
| #define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ |
| #define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ |
| #define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ |
| #define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ |
| #define EMAC_FLC 0xFFC0301C /* Flow Control Register */ |
| #define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ |
| #define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ |
| #define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ |
| #define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ |
| #define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ |
| #define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ |
| #define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ |
| #define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ |
| #define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ |
| #define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ |
| #define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ |
| #define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ |
| #define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ |
| #define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ |
| #define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ |
| #define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ |
| #define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ |
| #define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ |
| #define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ |
| #define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ |
| #define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ |
| #define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ |
| #define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ |
| #define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ |
| #define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ |
| #define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ |
| #define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ |
| #define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ |
| #define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ |
| #define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ |
| #define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ |
| #define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ |
| #define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ |
| #define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ |
| #define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ |
| #define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ |
| #define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ |
| #define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ |
| #define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ |
| #define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ |
| #define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ |
| #define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ |
| #define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ |
| #define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 <= x < 128 */ |
| #define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ |
| #define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ |
| #define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ |
| #define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ |
| #define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ |
| #define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ |
| #define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ |
| #define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ |
| #define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ |
| #define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ |
| #define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ |
| #define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ |
| #define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ |
| #define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ |
| #define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ |
| #define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ |
| #define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ |
| #define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ |
| #define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ |
| #define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ |
| #define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ |
| #define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 <= x < 128 */ |
| #define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ |
| #define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ |
| #define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ |
| #define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ |
| #define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ |
| #define USB_FADDR 0xFFC03800 /* Function address register */ |
| #define USB_POWER 0xFFC03804 /* Power management register */ |
| #define USB_INTRTX 0xFFC03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ |
| #define USB_INTRRX 0xFFC0380C /* Interrupt register for Rx endpoints 1 to 7 */ |
| #define USB_INTRTXE 0xFFC03810 /* Interrupt enable register for IntrTx */ |
| #define USB_INTRRXE 0xFFC03814 /* Interrupt enable register for IntrRx */ |
| #define USB_INTRUSB 0xFFC03818 /* Interrupt register for common USB interrupts */ |
| #define USB_INTRUSBE 0xFFC0381C /* Interrupt enable register for IntrUSB */ |
| #define USB_FRAME 0xFFC03820 /* USB frame number */ |
| #define USB_INDEX 0xFFC03824 /* Index register for selecting the indexed endpoint registers */ |
| #define USB_TESTMODE 0xFFC03828 /* Enabled USB 20 test modes */ |
| #define USB_GLOBINTR 0xFFC0382C /* Global Interrupt Mask register and Wakeup Exception Interrupt */ |
| #define USB_GLOBAL_CTL 0xFFC03830 /* Global Clock Control for the core */ |
| #define USB_TX_MAX_PACKET 0xFFC03840 /* Maximum packet size for Host Tx endpoint */ |
| #define USB_CSR0 0xFFC03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ |
| #define USB_TXCSR 0xFFC03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ |
| #define USB_RX_MAX_PACKET 0xFFC03848 /* Maximum packet size for Host Rx endpoint */ |
| #define USB_RXCSR 0xFFC0384C /* Control Status register for Host Rx endpoint */ |
| #define USB_COUNT0 0xFFC03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ |
| #define USB_RXCOUNT 0xFFC03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ |
| #define USB_TXTYPE 0xFFC03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ |
| #define USB_NAKLIMIT0 0xFFC03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ |
| #define USB_TXINTERVAL 0xFFC03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ |
| #define USB_RXTYPE 0xFFC0385C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ |
| #define USB_RXINTERVAL 0xFFC03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ |
| #define USB_TXCOUNT 0xFFC03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */ |
| #define USB_EP0_FIFO 0xFFC03880 /* Endpoint 0 FIFO */ |
| #define USB_EP1_FIFO 0xFFC03888 /* Endpoint 1 FIFO */ |
| #define USB_EP2_FIFO 0xFFC03890 /* Endpoint 2 FIFO */ |
| #define USB_EP3_FIFO 0xFFC03898 /* Endpoint 3 FIFO */ |
| #define USB_EP4_FIFO 0xFFC038A0 /* Endpoint 4 FIFO */ |
| #define USB_EP5_FIFO 0xFFC038A8 /* Endpoint 5 FIFO */ |
| #define USB_EP6_FIFO 0xFFC038B0 /* Endpoint 6 FIFO */ |
| #define USB_EP7_FIFO 0xFFC038B8 /* Endpoint 7 FIFO */ |
| #define USB_OTG_DEV_CTL 0xFFC03900 /* OTG Device Control Register */ |
| #define USB_OTG_VBUS_IRQ 0xFFC03904 /* OTG VBUS Control Interrupts */ |
| #define USB_OTG_VBUS_MASK 0xFFC03908 /* VBUS Control Interrupt Enable */ |
| #define USB_LINKINFO 0xFFC03948 /* Enables programming of some PHY-side delays */ |
| #define USB_VPLEN 0xFFC0394C /* Determines duration of VBUS pulse for VBUS charging */ |
| #define USB_HS_EOF1 0xFFC03950 /* Time buffer for High-Speed transactions */ |
| #define USB_FS_EOF1 0xFFC03954 /* Time buffer for Full-Speed transactions */ |
| #define USB_LS_EOF1 0xFFC03958 /* Time buffer for Low-Speed transactions */ |
| #define USB_APHY_CNTRL 0xFFC039E0 /* Register that increases visibility of Analog PHY */ |
| #define USB_APHY_CALIB 0xFFC039E4 /* Register used to set some calibration values */ |
| #define USB_APHY_CNTRL2 0xFFC039E8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ |
| #define USB_PHY_TEST 0xFFC039EC /* Used for reducing simulation time and simplifies FIFO testability */ |
| #define USB_PLLOSC_CTRL 0xFFC039F0 /* Used to program different parameters for USB PLL and Oscillator */ |
| #define USB_SRP_CLKDIV 0xFFC039F4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ |
| #define USB_EP_NI0_TXMAXP 0xFFC03A00 /* Maximum packet size for Host Tx endpoint0 */ |
| #define USB_EP_NI0_TXCSR 0xFFC03A04 /* Control Status register for endpoint 0 */ |
| #define USB_EP_NI0_RXMAXP 0xFFC03A08 /* Maximum packet size for Host Rx endpoint0 */ |
| #define USB_EP_NI0_RXCSR 0xFFC03A0C /* Control Status register for Host Rx endpoint0 */ |
| #define USB_EP_NI0_RXCOUNT 0xFFC03A10 /* Number of bytes received in endpoint 0 FIFO */ |
| #define USB_EP_NI0_TXTYPE 0xFFC03A14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ |
| #define USB_EP_NI0_TXINTERVAL 0xFFC03A18 /* Sets the NAK response timeout on Endpoint 0 */ |
| #define USB_EP_NI0_RXTYPE 0xFFC03A1C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ |
| #define USB_EP_NI0_RXINTERVAL 0xFFC03A20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ |
| #define USB_EP_NI0_TXCOUNT 0xFFC03A28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ |
| #define USB_EP_NI1_TXMAXP 0xFFC03A40 /* Maximum packet size for Host Tx endpoint1 */ |
| #define USB_EP_NI1_TXCSR 0xFFC03A44 /* Control Status register for endpoint1 */ |
| #define USB_EP_NI1_RXMAXP 0xFFC03A48 /* Maximum packet size for Host Rx endpoint1 */ |
| #define USB_EP_NI1_RXCSR 0xFFC03A4C /* Control Status register for Host Rx endpoint1 */ |
| #define USB_EP_NI1_RXCOUNT 0xFFC03A50 /* Number of bytes received in endpoint1 FIFO */ |
| #define USB_EP_NI1_TXTYPE 0xFFC03A54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ |
| #define USB_EP_NI1_TXINTERVAL 0xFFC03A58 /* Sets the NAK response timeout on Endpoint1 */ |
| #define USB_EP_NI1_RXTYPE 0xFFC03A5C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ |
| #define USB_EP_NI1_RXINTERVAL 0xFFC03A60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ |
| #define USB_EP_NI1_TXCOUNT 0xFFC03A68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ |
| #define USB_EP_NI2_TXMAXP 0xFFC03A80 /* Maximum packet size for Host Tx endpoint2 */ |
| #define USB_EP_NI2_TXCSR 0xFFC03A84 /* Control Status register for endpoint2 */ |
| #define USB_EP_NI2_RXMAXP 0xFFC03A88 /* Maximum packet size for Host Rx endpoint2 */ |
| #define USB_EP_NI2_RXCSR 0xFFC03A8C /* Control Status register for Host Rx endpoint2 */ |
| #define USB_EP_NI2_RXCOUNT 0xFFC03A90 /* Number of bytes received in endpoint2 FIFO */ |
| #define USB_EP_NI2_TXTYPE 0xFFC03A94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ |
| #define USB_EP_NI2_TXINTERVAL 0xFFC03A98 /* Sets the NAK response timeout on Endpoint2 */ |
| #define USB_EP_NI2_RXTYPE 0xFFC03A9C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ |
| #define USB_EP_NI2_RXINTERVAL 0xFFC03AA0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ |
| #define USB_EP_NI2_TXCOUNT 0xFFC03AA8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ |
| #define USB_EP_NI3_TXMAXP 0xFFC03AC0 /* Maximum packet size for Host Tx endpoint3 */ |
| #define USB_EP_NI3_TXCSR 0xFFC03AC4 /* Control Status register for endpoint3 */ |
| #define USB_EP_NI3_RXMAXP 0xFFC03AC8 /* Maximum packet size for Host Rx endpoint3 */ |
| #define USB_EP_NI3_RXCSR 0xFFC03ACC /* Control Status register for Host Rx endpoint3 */ |
| #define USB_EP_NI3_RXCOUNT 0xFFC03AD0 /* Number of bytes received in endpoint3 FIFO */ |
| #define USB_EP_NI3_TXTYPE 0xFFC03AD4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ |
| #define USB_EP_NI3_TXINTERVAL 0xFFC03AD8 /* Sets the NAK response timeout on Endpoint3 */ |
| #define USB_EP_NI3_RXTYPE 0xFFC03ADC /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ |
| #define USB_EP_NI3_RXINTERVAL 0xFFC03AE0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ |
| #define USB_EP_NI3_TXCOUNT 0xFFC03AE8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ |
| #define USB_EP_NI4_TXMAXP 0xFFC03B00 /* Maximum packet size for Host Tx endpoint4 */ |
| #define USB_EP_NI4_TXCSR 0xFFC03B04 /* Control Status register for endpoint4 */ |
| #define USB_EP_NI4_RXMAXP 0xFFC03B08 /* Maximum packet size for Host Rx endpoint4 */ |
| #define USB_EP_NI4_RXCSR 0xFFC03B0C /* Control Status register for Host Rx endpoint4 */ |
| #define USB_EP_NI4_RXCOUNT 0xFFC03B10 /* Number of bytes received in endpoint4 FIFO */ |
| #define USB_EP_NI4_TXTYPE 0xFFC03B14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ |
| #define USB_EP_NI4_TXINTERVAL 0xFFC03B18 /* Sets the NAK response timeout on Endpoint4 */ |
| #define USB_EP_NI4_RXTYPE 0xFFC03B1C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ |
| #define USB_EP_NI4_RXINTERVAL 0xFFC03B20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ |
| #define USB_EP_NI4_TXCOUNT 0xFFC03B28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ |
| #define USB_EP_NI5_TXMAXP 0xFFC03B40 /* Maximum packet size for Host Tx endpoint5 */ |
| #define USB_EP_NI5_TXCSR 0xFFC03B44 /* Control Status register for endpoint5 */ |
| #define USB_EP_NI5_RXMAXP 0xFFC03B48 /* Maximum packet size for Host Rx endpoint5 */ |
| #define USB_EP_NI5_RXCSR 0xFFC03B4C /* Control Status register for Host Rx endpoint5 */ |
| #define USB_EP_NI5_RXCOUNT 0xFFC03B50 /* Number of bytes received in endpoint5 FIFO */ |
| #define USB_EP_NI5_TXTYPE 0xFFC03B54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ |
| #define USB_EP_NI5_TXINTERVAL 0xFFC03B58 /* Sets the NAK response timeout on Endpoint5 */ |
| #define USB_EP_NI5_RXTYPE 0xFFC03B5C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ |
| #define USB_EP_NI5_RXINTERVAL 0xFFC03B60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ |
| #define USB_EP_NI5_TXCOUNT 0xFFC03B68 /* Number of bytes to be written to the endpoint5 Tx FIFO */ |
| #define USB_EP_NI6_TXMAXP 0xFFC03B80 /* Maximum packet size for Host Tx endpoint6 */ |
| #define USB_EP_NI6_TXCSR 0xFFC03B84 /* Control Status register for endpoint6 */ |
| #define USB_EP_NI6_RXMAXP 0xFFC03B88 /* Maximum packet size for Host Rx endpoint6 */ |
| #define USB_EP_NI6_RXCSR 0xFFC03B8C /* Control Status register for Host Rx endpoint6 */ |
| #define USB_EP_NI6_RXCOUNT 0xFFC03B90 /* Number of bytes received in endpoint6 FIFO */ |
| #define USB_EP_NI6_TXTYPE 0xFFC03B94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ |
| #define USB_EP_NI6_TXINTERVAL 0xFFC03B98 /* Sets the NAK response timeout on Endpoint6 */ |
| #define USB_EP_NI6_RXTYPE 0xFFC03B9C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ |
| #define USB_EP_NI6_RXINTERVAL 0xFFC03BA0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ |
| #define USB_EP_NI6_TXCOUNT 0xFFC03BA8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ |
| #define USB_EP_NI7_TXMAXP 0xFFC03BC0 /* Maximum packet size for Host Tx endpoint7 */ |
| #define USB_EP_NI7_TXCSR 0xFFC03BC4 /* Control Status register for endpoint7 */ |
| #define USB_EP_NI7_RXMAXP 0xFFC03BC8 /* Maximum packet size for Host Rx endpoint7 */ |
| #define USB_EP_NI7_RXCSR 0xFFC03BCC /* Control Status register for Host Rx endpoint7 */ |
| #define USB_EP_NI7_RXCOUNT 0xFFC03BD0 /* Number of bytes received in endpoint7 FIFO */ |
| #define USB_EP_NI7_TXTYPE 0xFFC03BD4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ |
| #define USB_EP_NI7_TXINTERVAL 0xFFC03BD8 /* Sets the NAK response timeout on Endpoint7 */ |
| #define USB_EP_NI7_RXTYPE 0xFFC03BDC /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ |
| #define USB_EP_NI7_RXINTERVAL 0xFFC03BF0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ |
| #define USB_EP_NI7_TXCOUNT 0xFFC03BF8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ |
| #define USB_DMA_INTERRUPT 0xFFC03C00 /* Indicates pending interrupts for the DMA channels */ |
| #define USB_DMA0_CONTROL 0xFFC03C04 /* DMA master channel 0 configuration */ |
| #define USB_DMA0_ADDRLOW 0xFFC03C08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ |
| #define USB_DMA0_ADDRHIGH 0xFFC03C0C /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ |
| #define USB_DMA0_COUNTLOW 0xFFC03C10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ |
| #define USB_DMA0_COUNTHIGH 0xFFC03C14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ |
| #define USB_DMA1_CONTROL 0xFFC03C24 /* DMA master channel 1 configuration */ |
| #define USB_DMA1_ADDRLOW 0xFFC03C28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ |
| #define USB_DMA1_ADDRHIGH 0xFFC03C2C /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ |
| #define USB_DMA1_COUNTLOW 0xFFC03C30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ |
| #define USB_DMA1_COUNTHIGH 0xFFC03C34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ |
| #define USB_DMA2_CONTROL 0xFFC03C44 /* DMA master channel 2 configuration */ |
| #define USB_DMA2_ADDRLOW 0xFFC03C48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ |
| #define USB_DMA2_ADDRHIGH 0xFFC03C4C /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ |
| #define USB_DMA2_COUNTLOW 0xFFC03C50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ |
| #define USB_DMA2_COUNTHIGH 0xFFC03C54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ |
| #define USB_DMA3_CONTROL 0xFFC03C64 /* DMA master channel 3 configuration */ |
| #define USB_DMA3_ADDRLOW 0xFFC03C68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ |
| #define USB_DMA3_ADDRHIGH 0xFFC03C6C /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ |
| #define USB_DMA3_COUNTLOW 0xFFC03C70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ |
| #define USB_DMA3_COUNTHIGH 0xFFC03C74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ |
| #define USB_DMA4_CONTROL 0xFFC03C84 /* DMA master channel 4 configuration */ |
| #define USB_DMA4_ADDRLOW 0xFFC03C88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ |
| #define USB_DMA4_ADDRHIGH 0xFFC03C8C /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ |
| #define USB_DMA4_COUNTLOW 0xFFC03C90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ |
| #define USB_DMA4_COUNTHIGH 0xFFC03C94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ |
| #define USB_DMA5_CONTROL 0xFFC03CA4 /* DMA master channel 5 configuration */ |
| #define USB_DMA5_ADDRLOW 0xFFC03CA8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ |
| #define USB_DMA5_ADDRHIGH 0xFFC03CAC /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ |
| #define USB_DMA5_COUNTLOW 0xFFC03CB0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ |
| #define USB_DMA5_COUNTHIGH 0xFFC03CB4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ |
| #define USB_DMA6_CONTROL 0xFFC03CC4 /* DMA master channel 6 configuration */ |
| #define USB_DMA6_ADDRLOW 0xFFC03CC8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ |
| #define USB_DMA6_ADDRHIGH 0xFFC03CCC /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ |
| #define USB_DMA6_COUNTLOW 0xFFC03CD0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ |
| #define USB_DMA6_COUNTHIGH 0xFFC03CD4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ |
| #define USB_DMA7_CONTROL 0xFFC03CE4 /* DMA master channel 7 configuration */ |
| #define USB_DMA7_ADDRLOW 0xFFC03CE8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ |
| #define USB_DMA7_ADDRHIGH 0xFFC03CEC /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ |
| #define USB_DMA7_COUNTLOW 0xFFC03CF0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ |
| #define USB_DMA7_COUNTHIGH 0xFFC03CF4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ |
| #define L1_DATA_A_SRAM 0xFF800000 /* 0xFF800000 -> 0xFF803FFF Data Bank A SRAM */ |
| #define L1_DATA_A_SRAM_SIZE (0xFF803FFF - 0xFF800000 + 1) |
| #define L1_DATA_A_SRAM_END (L1_DATA_A_SRAM + L1_DATA_A_SRAM_SIZE) |
| #define L1_DATA_B_SRAM 0xFF900000 /* 0xFF900000 -> 0xFF903FFF Data Bank B SRAM */ |
| #define L1_DATA_B_SRAM_SIZE (0xFF903FFF - 0xFF900000 + 1) |
| #define L1_DATA_B_SRAM_END (L1_DATA_B_SRAM + L1_DATA_B_SRAM_SIZE) |
| #define L1_INST_SRAM 0xFFA00000 /* 0xFFA00000 -> 0xFFA07FFF Instruction Bank A SRAM */ |
| #define L1_INST_SRAM_SIZE (0xFFA07FFF - 0xFFA00000 + 1) |
| #define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) |
| #define L1_SRAM_SCRATCH 0xFFB00000 /* 0xFFB00000 -> 0xFFB00FFF Scratchpad SRAM */ |
| #define L1_SRAM_SCRATCH_SIZE (0xFFB00FFF - 0xFFB00000 + 1) |
| #define L1_SRAM_SCRATCH_END (L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE) |
| #define SYSMMR_BASE 0xFFC00000 /* 0xFFC00000 -> 0xFFFFFFFF MMR registers */ |
| #define SYSMMR_BASE_SIZE (0xFFFFFFFF - 0xFFC00000 + 1) |
| #define SYSMMR_BASE_END (SYSMMR_BASE + SYSMMR_BASE_SIZE) |
| |
| #endif /* __BFIN_DEF_ADSP_BF526_proc__ */ |
