| /* |
| * Copyright 2007 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * Version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* |
| * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's |
| * |
| * Initialize controller and call the common driver/pci pci_hose_scan to |
| * scan for bridges and devices. |
| * |
| * Hose fields which need to be pre-initialized by board specific code: |
| * regions[] |
| * first_busno |
| * |
| * Fields updated: |
| * last_busno |
| */ |
| |
| #include <pci.h> |
| #include <asm/fsl_pci.h> |
| |
| /* Freescale-specific PCI config registers */ |
| #define FSL_PCI_PBFR 0x44 |
| #define FSL_PCIE_CAP_ID 0x4c |
| #define FSL_PCIE_CFG_RDY 0x4b0 |
| |
| void pciauto_prescan_setup_bridge(struct pci_controller *hose, |
| pci_dev_t dev, int sub_bus); |
| void pciauto_postscan_setup_bridge(struct pci_controller *hose, |
| pci_dev_t dev, int sub_bus); |
| void pciauto_config_init(struct pci_controller *hose); |
| |
| #ifndef CONFIG_SYS_PCI_MEMORY_BUS |
| #define CONFIG_SYS_PCI_MEMORY_BUS 0 |
| #endif |
| |
| #ifndef CONFIG_SYS_PCI_MEMORY_PHYS |
| #define CONFIG_SYS_PCI_MEMORY_PHYS 0 |
| #endif |
| |
| #if defined(CONFIG_SYS_PCI_64BIT) && !defined(CONFIG_SYS_PCI64_MEMORY_BUS) |
| #define CONFIG_SYS_PCI64_MEMORY_BUS (64ull*1024*1024*1024) |
| #endif |
| |
| int fsl_pci_setup_inbound_windows(struct pci_region *r) |
| { |
| struct pci_region *rgn_base = r; |
| u64 sz = min((u64)gd->ram_size, (1ull << 32) - 1); |
| |
| phys_addr_t phys_start = CONFIG_SYS_PCI_MEMORY_PHYS; |
| pci_addr_t bus_start = CONFIG_SYS_PCI_MEMORY_BUS; |
| pci_size_t pci_sz = 1ull << __ilog2_u64(sz); |
| |
| debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n", |
| (u64)bus_start, (u64)phys_start, (u64)pci_sz); |
| pci_set_region(r++, bus_start, phys_start, pci_sz, |
| PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | |
| PCI_REGION_PREFETCH); |
| |
| sz -= pci_sz; |
| bus_start += pci_sz; |
| phys_start += pci_sz; |
| |
| pci_sz = 1ull << __ilog2_u64(sz); |
| if (sz) { |
| debug ("R1 bus_start: %llx phys_start: %llx size: %llx\n", |
| (u64)bus_start, (u64)phys_start, (u64)pci_sz); |
| pci_set_region(r++, bus_start, phys_start, pci_sz, |
| PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | |
| PCI_REGION_PREFETCH); |
| sz -= pci_sz; |
| bus_start += pci_sz; |
| phys_start += pci_sz; |
| } |
| |
| #if defined(CONFIG_PHYS_64BIT) && defined(CONFIG_SYS_PCI_64BIT) |
| /* |
| * On 64-bit capable systems, set up a mapping for all of DRAM |
| * in high pci address space. |
| */ |
| pci_sz = 1ull << __ilog2_u64(gd->ram_size); |
| /* round up to the next largest power of two */ |
| if (gd->ram_size > pci_sz) |
| pci_sz = 1ull << (__ilog2_u64(gd->ram_size) + 1); |
| debug ("R64 bus_start: %llx phys_start: %llx size: %llx\n", |
| (u64)CONFIG_SYS_PCI64_MEMORY_BUS, |
| (u64)CONFIG_SYS_PCI_MEMORY_PHYS, |
| (u64)pci_sz); |
| pci_set_region(r++, |
| CONFIG_SYS_PCI64_MEMORY_BUS, |
| CONFIG_SYS_PCI_MEMORY_PHYS, |
| pci_sz, |
| PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | |
| PCI_REGION_PREFETCH); |
| #else |
| pci_sz = 1ull << __ilog2_u64(sz); |
| if (sz) { |
| debug ("R2 bus_start: %llx phys_start: %llx size: %llx\n", |
| (u64)bus_start, (u64)phys_start, (u64)pci_sz); |
| pci_set_region(r++, bus_start, phys_start, pci_sz, |
| PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | |
| PCI_REGION_PREFETCH); |
| sz -= pci_sz; |
| bus_start += pci_sz; |
| phys_start += pci_sz; |
| } |
| #endif |
| |
| #ifdef CONFIG_PHYS_64BIT |
| if (sz && (((u64)gd->ram_size) < (1ull << 32))) |
| printf("Was not able to map all of memory via " |
| "inbound windows -- %lld remaining\n", sz); |
| #endif |
| |
| return r - rgn_base; |
| } |
| |
| void fsl_pci_init(struct pci_controller *hose) |
| { |
| u16 temp16; |
| u32 temp32; |
| int busno = hose->first_busno; |
| int enabled; |
| u16 ltssm; |
| u8 temp8; |
| int r; |
| int bridge; |
| int inbound = 0; |
| volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr; |
| pci_dev_t dev = PCI_BDF(busno,0,0); |
| |
| /* Initialize ATMU registers based on hose regions and flags */ |
| volatile pot_t *po = &pci->pot[1]; /* skip 0 */ |
| volatile pit_t *pi = &pci->pit[0]; /* ranges from: 3 to 1 */ |
| |
| #ifdef DEBUG |
| int neg_link_w; |
| #endif |
| |
| for (r=0; r<hose->region_count; r++) { |
| u32 sz = (__ilog2_u64((u64)hose->regions[r].size) - 1); |
| if (hose->regions[r].flags & PCI_REGION_SYS_MEMORY) { /* inbound */ |
| u32 flag = PIWAR_EN | PIWAR_LOCAL | |
| PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; |
| pi->pitar = (hose->regions[r].phys_start >> 12); |
| pi->piwbar = (hose->regions[r].bus_start >> 12); |
| #ifdef CONFIG_SYS_PCI_64BIT |
| pi->piwbear = (hose->regions[r].bus_start >> 44); |
| #else |
| pi->piwbear = 0; |
| #endif |
| if (hose->regions[r].flags & PCI_REGION_PREFETCH) |
| flag |= PIWAR_PF; |
| pi->piwar = flag | sz; |
| pi++; |
| inbound = hose->regions[r].size > 0; |
| } else { /* Outbound */ |
| po->powbar = (hose->regions[r].phys_start >> 12); |
| po->potar = (hose->regions[r].bus_start >> 12); |
| #ifdef CONFIG_SYS_PCI_64BIT |
| po->potear = (hose->regions[r].bus_start >> 44); |
| #else |
| po->potear = 0; |
| #endif |
| if (hose->regions[r].flags & PCI_REGION_IO) |
| po->powar = POWAR_EN | sz | |
| POWAR_IO_READ | POWAR_IO_WRITE; |
| else |
| po->powar = POWAR_EN | sz | |
| POWAR_MEM_READ | POWAR_MEM_WRITE; |
| po++; |
| } |
| } |
| |
| pci_register_hose(hose); |
| pciauto_config_init(hose); /* grab pci_{mem,prefetch,io} */ |
| hose->current_busno = hose->first_busno; |
| |
| pci->pedr = 0xffffffff; /* Clear any errors */ |
| pci->peer = ~0x20140; /* Enable All Error Interupts except |
| * - Master abort (pci) |
| * - Master PERR (pci) |
| * - ICCA (PCIe) |
| */ |
| pci_hose_read_config_dword (hose, dev, PCI_DCR, &temp32); |
| temp32 |= 0xf000e; /* set URR, FER, NFER (but not CER) */ |
| pci_hose_write_config_dword(hose, dev, PCI_DCR, temp32); |
| |
| pci_hose_read_config_byte (hose, dev, PCI_HEADER_TYPE, &temp8); |
| bridge = temp8 & PCI_HEADER_TYPE_BRIDGE; /* Bridge, such as pcie */ |
| |
| if ( bridge ) { |
| |
| pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); |
| enabled = ltssm >= PCI_LTSSM_L0; |
| |
| #ifdef CONFIG_FSL_PCIE_RESET |
| if (ltssm == 1) { |
| int i; |
| debug("....PCIe link error. " |
| "LTSSM=0x%02x.", ltssm); |
| pci->pdb_stat |= 0x08000000; /* assert PCIe reset */ |
| temp32 = pci->pdb_stat; |
| udelay(100); |
| debug(" Asserting PCIe reset @%x = %x\n", |
| &pci->pdb_stat, pci->pdb_stat); |
| pci->pdb_stat &= ~0x08000000; /* clear reset */ |
| asm("sync;isync"); |
| for (i=0; i<100 && ltssm < PCI_LTSSM_L0; i++) { |
| pci_hose_read_config_word(hose, dev, PCI_LTSSM, |
| <ssm); |
| udelay(1000); |
| debug("....PCIe link error. " |
| "LTSSM=0x%02x.\n", ltssm); |
| } |
| enabled = ltssm >= PCI_LTSSM_L0; |
| } |
| #endif |
| |
| if (!enabled) { |
| debug("....PCIE link error. Skipping scan." |
| "LTSSM=0x%02x\n", ltssm); |
| hose->last_busno = hose->first_busno; |
| return; |
| } |
| |
| pci->pme_msg_det = 0xffffffff; |
| pci->pme_msg_int_en = 0xffffffff; |
| #ifdef DEBUG |
| pci_hose_read_config_word(hose, dev, PCI_LSR, &temp16); |
| neg_link_w = (temp16 & 0x3f0 ) >> 4; |
| printf("...PCIE LTSSM=0x%x, Negotiated link width=%d\n", |
| ltssm, neg_link_w); |
| #endif |
| hose->current_busno++; /* Start scan with secondary */ |
| pciauto_prescan_setup_bridge(hose, dev, hose->current_busno); |
| |
| } |
| |
| /* Use generic setup_device to initialize standard pci regs, |
| * but do not allocate any windows since any BAR found (such |
| * as PCSRBAR) is not in this cpu's memory space. |
| */ |
| |
| pciauto_setup_device(hose, dev, 0, hose->pci_mem, |
| hose->pci_prefetch, hose->pci_io); |
| |
| if (inbound) { |
| pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16); |
| pci_hose_write_config_word(hose, dev, PCI_COMMAND, |
| temp16 | PCI_COMMAND_MEMORY); |
| } |
| |
| #ifndef CONFIG_PCI_NOSCAN |
| pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &temp8); |
| |
| /* Programming Interface (PCI_CLASS_PROG) |
| * 0 == pci host or pcie root-complex, |
| * 1 == pci agent or pcie end-point |
| */ |
| if (!temp8) { |
| printf(" Scanning PCI bus %02x\n", |
| hose->current_busno); |
| hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno); |
| } else { |
| debug(" Not scanning PCI bus %02x. PI=%x\n", |
| hose->current_busno, temp8); |
| hose->last_busno = hose->current_busno; |
| } |
| |
| if ( bridge ) { /* update limit regs and subordinate busno */ |
| pciauto_postscan_setup_bridge(hose, dev, hose->last_busno); |
| } |
| #else |
| hose->last_busno = hose->current_busno; |
| #endif |
| |
| /* Clear all error indications */ |
| |
| if (bridge) |
| pci->pme_msg_det = 0xffffffff; |
| pci->pedr = 0xffffffff; |
| |
| pci_hose_read_config_word (hose, dev, PCI_DSR, &temp16); |
| if (temp16) { |
| pci_hose_write_config_word(hose, dev, |
| PCI_DSR, 0xffff); |
| } |
| |
| pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16); |
| if (temp16) { |
| pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff); |
| } |
| } |
| |
| /* Enable inbound PCI config cycles for agent/endpoint interface */ |
| void fsl_pci_config_unlock(struct pci_controller *hose) |
| { |
| pci_dev_t dev = PCI_BDF(hose->first_busno,0,0); |
| u8 agent; |
| u8 pcie_cap; |
| u16 pbfr; |
| |
| pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &agent); |
| if (!agent) |
| return; |
| |
| pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); |
| if (pcie_cap != 0x0) { |
| /* PCIe - set CFG_READY bit of Configuration Ready Register */ |
| pci_hose_write_config_byte(hose, dev, FSL_PCIE_CFG_RDY, 0x1); |
| } else { |
| /* PCI - clear ACL bit of PBFR */ |
| pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr); |
| pbfr &= ~0x20; |
| pci_hose_write_config_word(hose, dev, FSL_PCI_PBFR, pbfr); |
| } |
| } |
| |
| #ifdef CONFIG_OF_BOARD_SETUP |
| #include <libfdt.h> |
| #include <fdt_support.h> |
| |
| void ft_fsl_pci_setup(void *blob, const char *pci_alias, |
| struct pci_controller *hose) |
| { |
| int off = fdt_path_offset(blob, pci_alias); |
| |
| if (off >= 0) { |
| u32 bus_range[2]; |
| |
| bus_range[0] = 0; |
| bus_range[1] = hose->last_busno - hose->first_busno; |
| fdt_setprop(blob, off, "bus-range", &bus_range[0], 2*4); |
| fdt_pci_dma_ranges(blob, off, hose); |
| } |
| } |
| #endif |