| /* |
| * (C) Copyright 2007-2008 |
| * Stelian Pop <stelian.pop@leadtechdesign.com> |
| * Lead Tech Design <www.leadtechdesign.com> |
| * Ilko Iliev <www.ronetix.at> |
| * |
| * Configuation settings for the RONETIX PM9263 board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* ARM asynchronous clock */ |
| #define AT91_CPU_NAME "AT91SAM9263" |
| |
| #define CONFIG_DISPLAY_BOARDINFO |
| |
| #define MASTER_PLL_DIV 15 |
| #define MASTER_PLL_MUL 162 |
| #define MAIN_PLL_DIV 2 /* 2 or 4 */ |
| #define AT91_MAIN_CLOCK 18432000 |
| |
| #define CONFIG_SYS_HZ 1000 |
| |
| #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ |
| #define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/ |
| #define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */ |
| #define CONFIG_ARCH_CPU_INIT |
| #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ |
| |
| /* clocks */ |
| #define CONFIG_SYS_MOR_VAL 0x00002001 /* CKGR_MOR - enable main osc. */ |
| #define CONFIG_SYS_PLLAR_VAL \ |
| (0x2000BF00 | ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) |
| |
| #if (MAIN_PLL_DIV == 2) |
| /* PCK/2 = MCK Master Clock from PLLA */ |
| #define CONFIG_SYS_MCKR1_VAL 0x00000100 |
| /* PCK/2 = MCK Master Clock from PLLA */ |
| #define CONFIG_SYS_MCKR2_VAL 0x00000102 |
| #else |
| /* PCK/4 = MCK Master Clock from PLLA */ |
| #define CONFIG_SYS_MCKR1_VAL 0x00000200 |
| /* PCK/4 = MCK Master Clock from PLLA */ |
| #define CONFIG_SYS_MCKR2_VAL 0x00000202 |
| #endif |
| /* define PDC[31:16] as DATA[31:16] */ |
| #define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 |
| /* no pull-up for D[31:16] */ |
| #define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 |
| /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ |
| #define CONFIG_SYS_MATRIX_EBI0CSA_VAL 0x0001010A |
| /* EBI1_CSA, 3.3v, no pull-ups */ |
| #define CONFIG_SYS_MATRIX_EBI1CSA_VAL 0x00010100 |
| |
| /* SDRAM */ |
| /* SDRAMC_MR Mode register */ |
| #define CONFIG_SYS_SDRC_MR_VAL1 0 |
| /* SDRAMC_TR - Refresh Timer register */ |
| #define CONFIG_SYS_SDRC_TR_VAL1 0x13C |
| #define CONFIG_SYS_SDRC_CR_VAL 0x85227279 /*CL3*/ |
| /* Memory Device Register -> SDRAM */ |
| #define CONFIG_SYS_SDRC_MDR_VAL 0 |
| #define CONFIG_SYS_SDRC_MR_VAL2 0x00000002 /* SDRAMC_MR */ |
| #define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ |
| #define CONFIG_SYS_SDRC_MR_VAL3 4 /* SDRC_MR */ |
| #define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ |
| #define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ |
| #define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ |
| #define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ |
| #define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ |
| #define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ |
| #define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ |
| #define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ |
| #define CONFIG_SYS_SDRC_MR_VAL4 3 /* SDRC_MR */ |
| #define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ |
| #define CONFIG_SYS_SDRC_MR_VAL5 0 /* SDRC_MR */ |
| #define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ |
| #define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ |
| #define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ |
| |
| /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ |
| #define CONFIG_SYS_SMC0_SETUP0_VAL 0x0A0A0A0A /* SMC_SETUP */ |
| #define CONFIG_SYS_SMC0_PULSE0_VAL 0x0B0B0B0B /* SMC_PULSE */ |
| #define CONFIG_SYS_SMC0_CYCLE0_VAL 0x00160016 /* SMC_CYCLE */ |
| #define CONFIG_SYS_SMC0_CTRL0_VAL 0x00161003 /* SMC_MODE */ |
| |
| /* setup SMC1, CS0 (PSRAM) - 16-bit */ |
| #define CONFIG_SYS_SMC1_SETUP0_VAL 0x00000000 /* SMC_SETUP */ |
| #define CONFIG_SYS_SMC1_PULSE0_VAL 0x07020707 /* SMC_PULSE */ |
| #define CONFIG_SYS_SMC1_CYCLE0_VAL 0x00080008 /* SMC_CYCLE */ |
| #define CONFIG_SYS_SMC1_CTRL0_VAL 0x31001000 /* SMC_MODE */ |
| |
| #define CONFIG_SYS_RSTC_RMR_VAL 0xA5000301 /* user reset enable */ |
| |
| /* Watchdog */ |
| #define CONFIG_SYS_WDTC_WDMR_VAL 0x3fff8fff /* disable watchdog */ |
| |
| /* */ |
| |
| #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ |
| #define CONFIG_SETUP_MEMORY_TAGS 1 |
| #define CONFIG_INITRD_TAG 1 |
| |
| #undef CONFIG_SKIP_LOWLEVEL_INIT |
| #undef CONFIG_SKIP_RELOCATE_UBOOT |
| #define CONFIG_USER_LOWLEVEL_INIT 1 |
| |
| /* |
| * Hardware drivers |
| */ |
| #define CONFIG_ATMEL_USART 1 |
| #undef CONFIG_USART0 |
| #undef CONFIG_USART1 |
| #undef CONFIG_USART2 |
| #define CONFIG_USART3 1 /* USART 3 is DBGU */ |
| |
| /* LCD */ |
| #define CONFIG_LCD 1 |
| #define LCD_BPP LCD_COLOR8 |
| #define CONFIG_LCD_LOGO 1 |
| #undef LCD_TEST_PATTERN |
| #define CONFIG_LCD_INFO 1 |
| #define CONFIG_LCD_INFO_BELOW_LOGO 1 |
| #define CONFIG_SYS_WHITE_ON_BLACK 1 |
| #define CONFIG_ATMEL_LCD 1 |
| #define CONFIG_ATMEL_LCD_BGR555 1 |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 |
| |
| #define CONFIG_LCD_IN_PSRAM 1 |
| |
| /* LED */ |
| #define CONFIG_AT91_LED |
| #define CONFIG_RED_LED AT91_PIN_PB7 /* this is the power led */ |
| #define CONFIG_GREEN_LED AT91_PIN_PB8 /* this is the user1 led */ |
| |
| #define CONFIG_BOOTDELAY 3 |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE 1 |
| #define CONFIG_BOOTP_BOOTPATH 1 |
| #define CONFIG_BOOTP_GATEWAY 1 |
| #define CONFIG_BOOTP_HOSTNAME 1 |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| #undef CONFIG_CMD_BDI |
| #undef CONFIG_CMD_IMI |
| #undef CONFIG_CMD_AUTOSCRIPT |
| #undef CONFIG_CMD_FPGA |
| #undef CONFIG_CMD_LOADS |
| #undef CONFIG_CMD_IMLS |
| |
| #define CONFIG_CMD_PING 1 |
| #define CONFIG_CMD_DHCP 1 |
| #define CONFIG_CMD_NAND 1 |
| #define CONFIG_CMD_USB 1 |
| |
| /* SDRAM */ |
| #define CONFIG_NR_DRAM_BANKS 1 |
| #define PHYS_SDRAM 0x20000000 |
| #define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ |
| |
| /* DataFlash */ |
| #define CONFIG_ATMEL_DATAFLASH_SPI |
| #define CONFIG_HAS_DATAFLASH 1 |
| #define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) |
| #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 |
| #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ |
| #define AT91_SPI_CLK 15000000 |
| #define DATAFLASH_TCSS (0x1a << 16) |
| #define DATAFLASH_TCHS (0x1 << 24) |
| |
| /* NOR flash, if populated */ |
| #define CONFIG_SYS_FLASH_CFI 1 |
| #define CONFIG_FLASH_CFI_DRIVER 1 |
| #define PHYS_FLASH_1 0x10000000 |
| #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
| #define CONFIG_SYS_MAX_FLASH_SECT 256 |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| |
| /* NAND flash */ |
| #ifdef CONFIG_CMD_NAND |
| #define CONFIG_NAND_ATMEL |
| #define CONFIG_SYS_NAND_MAX_CHIPS 1 |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define CONFIG_SYS_NAND_BASE 0x40000000 |
| #define CONFIG_SYS_NAND_DBW_8 1 |
| /* our ALE is AD21 */ |
| #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) |
| /* our CLE is AD22 */ |
| #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) |
| #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 |
| #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PB30 |
| #endif |
| |
| #define CONFIG_CMD_JFFS2 1 |
| #define CONFIG_JFFS2_CMDLINE 1 |
| #define CONFIG_JFFS2_NAND 1 |
| #define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ |
| #define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ |
| #define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition size*/ |
| |
| /* PSRAM */ |
| #define PHYS_PSRAM 0x70000000 |
| #define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */ |
| |
| /* Ethernet */ |
| #define CONFIG_MACB 1 |
| #define CONFIG_RMII 1 |
| #define CONFIG_NET_MULTI 1 |
| #define CONFIG_NET_RETRY_COUNT 20 |
| #define CONFIG_RESET_PHY_R 1 |
| |
| /* USB */ |
| #define CONFIG_USB_ATMEL |
| #define CONFIG_USB_OHCI_NEW 1 |
| #define CONFIG_DOS_PARTITION 1 |
| #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 |
| #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ |
| #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" |
| #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 |
| #define CONFIG_USB_STORAGE 1 |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ |
| |
| #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM |
| #define CONFIG_SYS_MEMTEST_END 0x23e00000 |
| |
| #define CONFIG_SYS_USE_FLASH 1 |
| #undef CONFIG_SYS_USE_DATAFLASH |
| #undef CONFIG_SYS_USE_NANDFLASH |
| |
| #ifdef CONFIG_SYS_USE_DATAFLASH |
| |
| /* bootstrap + u-boot + env + linux in dataflash on CS0 */ |
| #define CONFIG_ENV_IS_IN_DATAFLASH |
| #define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) |
| #define CONFIG_ENV_OFFSET 0x4200 |
| #define CONFIG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) |
| #define CONFIG_ENV_SIZE 0x4200 |
| #define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" |
| #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ |
| "root=/dev/mtdblock0 " \ |
| "mtdparts=at91_nand:-(root) "\ |
| "rw rootfstype=jffs2" |
| |
| #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */ |
| |
| /* bootstrap + u-boot + env + linux in nandflash */ |
| #define CONFIG_ENV_IS_IN_NAND |
| #define CONFIG_ENV_OFFSET 0x60000 |
| #define CONFIG_ENV_OFFSET_REDUND 0x80000 |
| #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ |
| #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" |
| #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ |
| "root=/dev/mtdblock5 " \ |
| "mtdparts=at91_nand:" \ |
| "128k(bootstrap)ro," \ |
| "256k(uboot)ro," \ |
| "128k(env1)ro," \ |
| "128k(env2)ro," \ |
| "2M(linux)," \ |
| "-(root) " \ |
| "rw rootfstype=jffs2" |
| |
| #elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */ |
| |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| #define CONFIG_ENV_OFFSET 0x40000 |
| #define CONFIG_ENV_SECT_SIZE 0x10000 |
| #define CONFIG_ENV_SIZE 0x10000 |
| #define CONFIG_ENV_OVERWRITE 1 |
| |
| /* JFFS Partition offset set */ |
| #define CONFIG_SYS_JFFS2_FIRST_BANK 0 |
| #define CONFIG_SYS_JFFS2_NUM_BANKS 1 |
| |
| /* 512k reserved for u-boot */ |
| #define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 |
| |
| #define CONFIG_BOOTCOMMAND "run flashboot" |
| #define CONFIG_ROOTPATH /ronetix/rootfs |
| #define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" |
| |
| #define CONFIG_CON_ROT "fbcon=rotate:3 " |
| #define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 "\ |
| CONFIG_CON_ROT |
| |
| #define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=nand" |
| #define MTDPARTS_DEFAULT \ |
| "mtdparts=physmap-flash.0:" \ |
| "256k(u-boot)ro," \ |
| "64k(u-boot-env)ro," \ |
| "1408k(kernel)," \ |
| "-(rootfs);" \ |
| "nand:-(nand)" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "mtdids=" MTDIDS_DEFAULT "\0" \ |
| "mtdparts=" MTDPARTS_DEFAULT "\0" \ |
| "partition=nand0,0\0" \ |
| "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ |
| "nfsargs=setenv bootargs root=/dev/nfs rw " \ |
| CONFIG_CON_ROT \ |
| "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ |
| "addip=setenv bootargs $(bootargs) " \ |
| "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ |
| ":$(hostname):eth0:off\0" \ |
| "ramboot=tftpboot 0x22000000 vmImage;" \ |
| "run ramargs;run addip;bootm 22000000\0" \ |
| "nfsboot=tftpboot 0x22000000 vmImage;" \ |
| "run nfsargs;run addip;bootm 22000000\0" \ |
| "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ |
| "" |
| |
| #else |
| #error "Undefined memory device" |
| #endif |
| |
| #define CONFIG_BAUDRATE 115200 |
| #define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } |
| |
| #define CONFIG_SYS_PROMPT "u-boot-pm9263> " |
| #define CONFIG_SYS_CBSIZE 256 |
| #define CONFIG_SYS_MAXARGS 16 |
| #define CONFIG_SYS_PBSIZE \ |
| (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) |
| #define CONFIG_SYS_LONGHELP 1 |
| #define CONFIG_CMDLINE_EDITING 1 |
| |
| #define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) |
| /* |
| * Size of malloc() pool |
| */ |
| #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) |
| #define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ |
| |
| #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ |
| |
| #ifdef CONFIG_USE_IRQ |
| #error CONFIG_USE_IRQ not supported |
| #endif |
| |
| #endif |
