blob: 82d14014692697de00b88ee031b2258869504729 [file] [log] [blame]
/*
* (C) Copyright 2002
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* Configuation settings for the CERF250 board.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
#define CONFIG_CERF250 1 /* on Cerf PXA Board */
#define BOARD_LATE_INIT 1
#define CONFIG_BAUDRATE 38400
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/* we will never enable dcache, because we have to setup MMU first */
#define CONFIG_SYS_NO_DCACHE
/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
*/
#define CONFIG_DRIVER_SMC91111
#define CONFIG_SMC91111_BASE 0x04000300
#define CONFIG_SMC_USE_32_BIT
/*
* select serial console configuration
*/
#define CONFIG_FFUART 1 /* we use FFUART on CERF PXA */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_BOOTDELAY 3
#define CONFIG_ETHADDR 00:D0:CA:F1:3C:D2
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.0.5
#define CONFIG_SERVERIP 192.168.0.2
#define CONFIG_BOOTCOMMAND "bootm 0xC0000"
#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400"
#define CONFIG_CMDLINE_TAG
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_HUSH_PARSER 1
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#ifdef CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "uboot$ " /* Monitor Command Prompt */
#else
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#endif
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_DEVICE_NULLDEV 1
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
#endif
/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
#define CONFIG_SYS_DRAM_BASE 0xa0000000
#define CONFIG_SYS_DRAM_SIZE 0x04000000
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
/*
* GPIO settings
*/
#define CONFIG_SYS_GPSR0_VAL 0x00408030
#define CONFIG_SYS_GPSR1_VAL 0x00BFA882
#define CONFIG_SYS_GPSR2_VAL 0x0001C000
#define CONFIG_SYS_GPCR0_VAL 0xC0031100
#define CONFIG_SYS_GPCR1_VAL 0xFC400300
#define CONFIG_SYS_GPCR2_VAL 0x00003FFF
#define CONFIG_SYS_GPDR0_VAL 0xC0439330
#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB82
#define CONFIG_SYS_GPDR2_VAL 0x0001FFFF
#define CONFIG_SYS_GAFR0_L_VAL 0x80000000
#define CONFIG_SYS_GAFR0_U_VAL 0xA5000010
#define CONFIG_SYS_GAFR1_L_VAL 0x60008018
#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA
#define CONFIG_SYS_GAFR2_L_VAL 0xAAA0000A
#define CONFIG_SYS_GAFR2_U_VAL 0x00000002
#define CONFIG_SYS_PSSR_VAL 0x20
/*
* Memory settings
*/
#define CONFIG_SYS_MSC0_VAL 0x12447FF0
#define CONFIG_SYS_MSC1_VAL 0x12BC5554
#define CONFIG_SYS_MSC2_VAL 0x7FF97FF1
#define CONFIG_SYS_MDCNFG_VAL 0x00001AC9
#define CONFIG_SYS_MDREFR_VAL 0x03CDC017
#define CONFIG_SYS_MDMRS_VAL 0x00000000
/*
* PCMCIA and CF Interfaces
*/
#define CONFIG_SYS_MECR_VAL 0x00000000
#define CONFIG_SYS_MCMEM0_VAL 0x00010504
#define CONFIG_SYS_MCMEM1_VAL 0x00010504
#define CONFIG_SYS_MCATT0_VAL 0x00010504
#define CONFIG_SYS_MCATT1_VAL 0x00010504
#define CONFIG_SYS_MCIO0_VAL 0x00004715
#define CONFIG_SYS_MCIO1_VAL 0x00004715
#define _LED 0x08000010 /*check this */
#define LED_BLANK 0x08000040
#define LED_GPIO 0x10
/*
* FLASH and environment organization
*/
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
#define CONFIG_SYS_MONITOR_LEN 0x40000 /* 256 KiB */
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
#endif /* __CONFIG_H */